1. Minimum 2-3 years working experience in marine Air - Conditioning, repairs, installation and troubleshooting

2. Job experience in marine Air-conditioning, Mechanical Ventilation and heating system.

3. Good knowledge in Electrical of Air – Cond system.

4. Can carry out maintenance of air-cond works, troubleshooting electrical systems on site.

5. Knowledge in water cooled air-cond system with Carrier, Bitzer, Bock compressor etc.

6. Good knowledge in system air balancing and chilled water system water balancing.

7. Possess good communications skills.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

• Troubleshoot, installation, maintenance and repair on designated equipment and product.
• Build a strong relationship with customers and identify opportunities to develop new applications.

Requirements:

• Diploma in Electronics/Mechatronics Engineering or equivalent
• At least 2 years of experience in semiconductor/cleanroom industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Summary / Purpose of Position:

Work with our technology and trading teams to support development and improvement of our trading platform and operations.

Essential Duties & Responsibilities for this Position

• Act as the first line of defense for issues arising in production.
• Monitor and improve system startup, operation, and batch jobs, respond to failures, and proactively work with other teams to identify and correct root causes.
• Improve monitoring and notification systems. Automate error detection and reporting.
• Manage and improve continuous integration and release processes.

Qualifications, Skills and Knowledge Required

• Prior experience as DevOps or similar in a technical industry.
• Hands-on development experience in Python.
• Working knowledge of process management on Linux.
• Experience with monitoring tools such as Grafana.
• Attention to detail and strong problem-solving and prioritization skills.
• Clear communication skills in English.

1. JOB PURPOSE Maintain Medical Devices & Systems to the highest levels of performance, quality and integrity aligned to HPL requirements Act as point of contact for all EME related community work. Responsibility for delivery of the EME service provision to third party stakeholders 2. JOB SUMMARY To perform service and maintenance activities on a wide range of Medical devices for our third party stakeholders. This includes local community Hospitals, Health Centres, Doctors practices, Acute NHS Trusts and Private Hospitals. Reporting to the Deputy EME Manager, the EME field service Engineer will be responsible for all aspects of maintenance including annual servicing, emergency call-out, and minor repairs. This position will be required to establish and maintain a professional working relationship with customers and internal colleagues. The role calls for someone from an Electronics / Instrumentation Engineering background, and as such the post holder will require knowledge across the range of technologies and services that fall under the responsibility of this post. The role will frequently require the post holder to engage with infrastructure and business projects and the adoption of new technologies in line with business requirements. 3. KEY RESULT AREAS/MAIN DUTIES AND RESPONSIBILITIES Proactive monitoring to ensure maximum uptime, reporting any downtime in a timely manner to the Head of Medical Engineering Engagement with third-party vendors, including participation in service reviews, billing review, and escalation of issues where appropriate Liaison with third-parties in the ongoing maintenance of a range of Medical Devices. The post holder must have a full understanding and knowledge of medical devices normally used in a hospital environment The post holder will be expected to participate and contribute to monthly EME meetings Work with other teams to improve service delivery to the end user through a collaborative and structured approach to problem resolution Involved in the ongoing development and documentation of processes and procedures in line with the trusts corporate policy, objectives and goals Identify and escalate perceived risks to Head of Engineering where appropriate, managing and alleviating risk and where possible resolving the risk The post holder will be expected to be working in less than desirable working conditions i.e.: dirty and soiled equipment. The post holder must be able to move and carry equipment in excess of 20Kg The post holder will be responsible for own day to day work load and travel to other sites covered by the department is expected as part of the role. The ability to drive is expected as part of this role. The post holder must keep accurate records and update any work carried out by the post holder Security role controlling both local resource and access rights Documentation of processes for use across EME departments by both technical and non-technical personnel Provide guidance and technical training to junior members of the EME team. Technical Capability The following is an indication of the technologies the candidate is expected to be proficient in with a focus in the Medical Device area, this is not an exhaustive list and technologies may be altered to reflect current state aligned to changing business need: Carry out EST and PPM on various equipment In depth knowledge of BS62353 (2008): Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment. 4. OTHER RESPONSIBILITIES Management To take responsibility as a Medical Device functional expert, providing leadership, recognising and developing the team, mentoring, coaching and training them to utilise their strengths to enhance the departments performance and build organisational capability. To be responsible for the self-development of skills and competencies through participation in learning and development activities, and to maintain up to date technical and professional knowledge relevant to the post. Develop understanding on specific emerging technologies and good practices and then facilitate and develop this knowledge across the EME team. Finance You are required to comply with the HPL Standard of Business Conduct policy and the Code of Professional Conduct for Register of Clinical Technologists (RCT) and you are required to declare all situations where you (or a close relative or associate) have a controlling interest in a business (such as a private company, public organisation, other NHS organisation or voluntary organisation) or in any other activity which may compete for an NHS contract to supply goods or service to the Trust. Be a part of Infrastructure procurements as a subject matter expert operating within SFIs ensuring good financial control and records are maintained at all times.

Field Service Engineer | Bristol, BS31 1PF | Full Time Mon – Fri, 8am Start | £25 to £30k per annum (based on experience)

Would you like to join a family run, Bristol based company that Maintains, Repairs and Inspects Wood and Metal cutting equipment for a wide range of UK based clients? Our client is currently seeking an experienced/semi experienced Field Service Engineer to service, repair, and conduct inspection of a wide range of machines in their customer sites.

This role will offer a great work/life balance. Whilst engineers are expected to be on site for 8am they return home once their job is complete, which often means an early afternoon finish.

Hours are Monday – Friday, with no weekend work, no on-call and no Bank Holidays.

Due to the nature of the business and the various working environments, the post holder will be subject to an enhanced DBS (Disclosure & Barring Service) check.

Requirements of the Field Service Engineer:

• Mechanical or Electrical qualification and experience; however, ‘on the job’ training will be given
• Driving Licence is essential
• Flexible to drive and carry out tasks at various locations throughout the UK
• Flexibility around start times; Engineers are expected to arrive on site at 8am regardless of location.

Duties of the Field Service Engineer:

• General Servicing & Conformity of all Machines / Compliance with PUWER98 Regs and BS4163.2021 (for Educational Establishments), Guarding, electrical safety and operational maintenance.
• The post holder will be expected to always liaise with all clients in a confident and professional manner
• Willing to travel to the Company office in Keynsham, Bristol, when necessary (usually around once a week), for collection of parts etc

Benefits:

• A company vehicle will be provided
• Overnight accommodation will be provided when deemed necessary
• Company pension

If you feel you’re the ideal candidate, send in your CV by clicking the APPLY button today!

Your data will be handled in line with GDPR.

We have an exciting opportunity for an experienced, innovative, energetic, passionate, and client centric technologist to join our workplace support team in our new Philippines Global Delivery Centre in Philippines, to support the business with everyday IT. 

The Pasig City office is the location for our Global Delivery Centre in Philippines and is a fast-paced environment hosting several company senior stakeholders and client facing delivery teams.  The role of the Workplace Support Technician is to maintain End User Support and Workplace Technology services to the highest standards to help drive client delivery, business support, and customer satisfaction across the region.

Please note: This role requires a high level of self-confidence, ability to communicate at all levels, with a requirement for a high degree of integrity, trust, and credibility to succeed personally and with the team in mind.

The Workplace Support Technician is responsible for providing first class Tier 1 and Tier 2 support to our colleagues across the Pasig City office. 

Workplace IT technicians will provide Desktop Support on-site and through remote support tools either directly or through escalations via the Global Service Desk. 

Our Global Service Desk a 24/5 service located in Manila and administers both incident management and service request fulfilment.

In addition, the Workplace Support Technician must work collaboratively with the Regional and Global Technology Service teams ensure all incidents and service requests are fulfilled in-line with our incident, change and problem management processes.  The Workplace Support Technician will be expected to assist with local project and infrastructure activities essential for continuous improvement. 

Furthermore, you will be expected to engage with other activities ranging from IT Compliance, Security and Facilities management to ensure the offices are always in line with our regulatory, quality assurance and BCP obligations.

You will need to possess a high level of customer service experience, always prioritising client delivery over other activities, ensuring that our customers are able to deliver to clients using production tools and services.  You will require a high level of energy, robust sense of humour and positive attitude to get things done.

Tasks (what does the role do on a day-to-day basis)

• Provide technical support and guidance to on-site customers and remote support for other users across the region when required.
• Complete Incidents and Service Requests escalated by Global Service Desk
• Liaise closely with other members of the Global Service Desk team to ensure knowledge and expertise is shared effectively.
• Monitoring and management of tickets assigned to the Region or local Workplace.
• Assist in planning, testing, and deploying Workplace Technology upgrades including local hardware and applications.
• Maintaining the Asset Management database for all Laptops, Smartphones, Tablets, and Printers
• Providing security and compliance reports that are required for specific control objectives across the region.
• Collaborate with Group Technology Infrastructure, Application and Workplace Technology teams to ensure consistency and best practice to support all customers across the region
• Ensure hardware and software remains in-line with Global Standards across the region including build, vulnerabilities, and patches
• Prioritising resolution of P1/P2 incidents and service requests through the ITSM platform (ManageEngine)
• Tier 1 & Tier 2 support for Group Technology estate when needed: desktop hardware, printers, servers, and applications (both remote and hands-on)
• Follow the Group Technology Service Governance processes in incident, access, request, problem, and change management always
• Maintain and make use of software updates, drivers, knowledge bases, and frequently asked questions resources on the Internet to aid in problem resolution
• Communicate effectively through high quality documentation, face to face interaction and presentation, both at a deep technical level and for senior non-technical audiences
• Assisting with Regional management and review of major Incidents and identifying root causes and workarounds for problems
• Ensure daily tasks are carried out to ensure the smooth running of the Group Technology infrastructure, such as monitoring to ensure maximum availability and excellent performance of systems
• Occasional site visits to other regional locations to perform support related activities when required

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Fresh can also apply

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

• Implement electrical systems and products
• Manage engineering projects and deliver them on time
• Ensure that installations and applications are in line with customer needs and safety standards
• Collaborate with engineers and technicians to apply new system processes
• Monitor maintenance and inspection plans

Job Description

• Industry/ Organization Type: Manufacturing (Marine)
• Position Title: Service Engineer (Electrical)
• Working Location: Jurong East
• Working Hours: 5 days (Mon – Fri, 8.30 AM – 5.30 PM)
• Salary Package: Basic salary up to $3,200 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• To provide timely and effective response and technical support to assigned projects
• To assist with onsite troubleshooting, maintenance & repair work, as well as installation and commissioning of machines and equipment
• Attend inspection works and make adequate explanation to customers for the technical issues
• To support the Supervisor and/or Project Leader in all aspects of the project
• To provide standby technical support for customer requirements

APPLY NOW!!!

• Diploma or Degree in Electrical Engineering or related field
• Preferred candidates with 2 years of relevant experience
• Effective communication and teamwork abilities
• Able to work on vessel
• Possess class 3 driving license is advantageous

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66098 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Service Engineer (Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Able to perform hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Must be willing to perform hands-on work in mechanical repairs, installation, and removals.
• Able to read and understand engineering drawings (Electrical and pneumatic).
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with travelling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

Enterprise Information Technology Support

• Provide user support on issues related to VISION workstations, Network matters, IP telephony, audio video equipment.
• Support ad hoc setup and support for conferencing and audio-visual presentation.
• Point of escalation for user support call to the corporate service desk
• Update and maintain the IT inventory in the CMDB database for the VISION infrastructure, accessories and user devices.
• Update and maintain all software licensing used exclusively by Plant and provision of user devices at Plant.
• Perform user support tasks in service now tickets and troubleshooting as required.
• Other duties include SQL database and Server administration.

Industrial Information Technology Assistance

• Assist for Industrial Information Technology Systems projects when required.
• Provide technical assistance for Industrial IT equipment’s involved in the project.
• Coordinate and transit technical IT deliverables in accordance with Corporate’s IT policy
• Update and maintain IT inventory in CMDB and CMMS for industrial infrastructure, accessories and user devices.
• Assist first level troubleshooting of the system, in coordination with E&I team, Group IT teams (DSI MS, TGITS) and external suppliers if required.
• Support Software Manufacturing System and Software Automation for productivity improvement initiatives when required.
• Supports new product software launches, IT processes and work within designated IT guidelines.
• Stay current with technology and determining the impact of hardware and/or software upgrades on new and existing applications.

Cyber Security

• Support the local Cyber Security Officer and act as his backup in his absence.
• Ensure that the Cyber Security rules are integrated to the contract with vendors.
• Warn the plant manager and the Branch Cyber Security Manager in case of a major Cyber security risk or incident.

Maintenance

• Performs routine maintenance tasks for infrastructure systems such as backups, patch management and hot fixes.
• Develops plans to manage the frequency of appropriate support package/patch application.
• Monitors database maintenance and provides appropriate recommendations, when required.
• Develops IT equipment replacement plan.
• Develop and update the Site Documentation relating to the local infrastructure, ensuring it is published in the designated area.

Projects and Budget

• Propose the local IT budget ensuring optimum utilization of resources whilst maintaining cost effective services.
• Ensure all IT related costs for the affiliate are captured in the IT budget and properly validated by management and MS/APMO IS team.
• Ensure IT projects are managed to successful completion, within agreed costs and timescales, with the proper methodology and standards.

Requirements

• Minimum Diploma holder with 5 years similar working experience.
• Good knowledge in Enterprise IT Infrastructures (workstations, networks, server, data rooms) management
• Good understanding of local IT infrastructure and its components with the ability to assess cybersecurity risks.
• Field Instrumentation work experience will be an advantage.

Duties and Responsibilities:

• Manage daily technical services associated with fulfillment of contractual obligations for PM and CM activities, testing and commissioning of new and/or upgrade of UPS products.
• Act as the first line contact point and execute escalation process for swift deployment of technical support and related actions through our roster of Customer Engineers.
• Manage client call request and after-sales-service processes.
• Facilitate relevant root-cause-analysis for major and critical technical issues experienced in the field and cascade accordingly to stakeholders.
• Support technical training to end-customers
• Assist the Service Operation Manager to carry out the company’s commitment and promise delivery of service level to the customer.
• To carry out maintenance, start-up, testing, commissioning,
  troubleshooting, repairing and power quality analysis .
• To provide technical support and assistance in the cost evaluation for “time & material”repair quotation.
• Participate and contribute to the training, supervision, motivation and development of the other team member for continual improvement and optimized performance.
• Keeping up to date the knowledge and application of products/services.
• Continually developing and improving as a service professional by self analysis, reading, benchmarking against the best in the industry and practicing.

Requirements
Bachelor of Science in Engineering or Electrical.
5 years of experience as UPS service.
Maintenance Services with least 2 of the following skills/experience:
Experience in Service Contracts Administration
Experience in UPS products and services
Experience in Rectifier Systems (AC and DC)

Experience is an advantage

Job purpose

• To ensure smooth operation by monitoring and maintaining our Client’s Networks, Server, Application Software and Hardware systems while providing technical support to onsite and remotely.

Duties and responsibilities

• Providing first-level helpdesk and end-user support.
• Setup PC/Laptop, Backup PC/Laptop and migration of PC/Laptop Data
• nstalling and configuring computer hardware, software, systems, networks, printers, and other IT equipment.
• Troubleshooting of System and Network problems and diagnose and resolving hardware or software faults.
• Administration of user accounts (Active Directory, LDAP), Microsoft 365 azure, WHM and cPanel.
• Documenting and managing of Client IT Assets, Inventory, and other IT supplies.
• Testing and evaluating new technology.

Requirements

• Proven 2 – 4 years of hands-on experience working in an end-user IT Support role or computer operations environment.
• Experience in installation, setup, configuration, migration, upgrading and maintenance of servers, PCs, OS, software and other related peripherals.
• Required technical troubleshooting skills for Windows 10, 11.
• Managing of Action Directory and User email accounts, Trend micro and Acronis Backup Exec Virtualisation preferably VMware.
• Basic networking protocol (DNS, DHCP, VLAN) with advanced printer / peripheral device troubleshooting.
• Support for handheld smartphones and tablets.
• Monitor and ensures compliance with company’s IT Security policies.
• Able to work independently and carry out day-to-day IT support with good analytical problem-solving, time management and decision-making skills.
• Willingness to take ownership of task and express interests in learning new technologies and systems.