Your Browser is Not Supported
To ensure jobstore run smoothly, please use the latest version of the following supported browsers:
Official account of Jobstore.
Job Category:
Allied HealthWork Shift/Schedule:
10 Hr Morning - AfternoonNortheast Georgia Health System is rooted in a foundation of improving the health of our communities.
Responsible for prioritizing testing procedures and completing those procedures in an accurate and timely manner to facilitate rapid patient recovery. Maintains proper records of all tests done in accordance with Joint Commission requirements. This position will care for patients in the neonate, infant, child, adolescent, adult and geriatric age groups. Employee performs clinical duties in accordance with population specific guidelines and adheres to National Patient Safety Goals as outlined in policy and procedures.
Licensure or other certifications: ASCP, NCA, or AMT. Meets the requirements of the State of Georgia - Licensure is not required to be hire for this position
Educational Requirements: Associates Degree
Minimum Experience:
Other: 1. Has earned an associate's degree in medical laboratory technology; or successful completion of two years of academic study (a minimum of 90 quarter hours or equivalent) in an accredited college or university which included at least 20 quarter hours of lecture and laboratory courses in chemical, physical, or biological sciences acceptable toward a major in science and have at least one year of pertinent laboratory experience or training accepted by the Department; or
2. For persons who possess the technician qualifications under provisions above and have recently moved into the state or completed the academic and/or training requirements, they may be temporarily classified once as technicians for eighteen (3) months to afford them an opportunity to successfully complete an approved qualifying examination.
3. Persons who have been continuously engaged as technicians in Georgia since July 1, 1970 are exempt from personnel qualifications listed above. Persons who initially qualified under this provision but become inactive for two consecutive years for any reason must meet current requirements. Provided, further, individuals and laboratories so concerned must meet all other standards of performance required by this law and applicable rules and regulations.
Preferred Licensure or other certifications:
Preferred Educational Requirements:
Preferred Experience: Two (2) to three (3) years (not including internship and education)
Other:
Basic Computer Skills
Analytical Skills
Communication Skills
Correctly completes routine and stat testing in established time frame with less than three discrepancies per year as documented by variance report.
Performs analysis independently according to established criteria.
Maintains accurate records and documentation.
Consults with Technologist, section head or Pathologist on questionable or unusual test results with no more than three documented discrepancies per year.
Inputs data accurately into the computer system.
Regularly provides suggestions for quality improvement in the laboratory.
Assists in precepting MLT students as established by the lab.
Attends at least 80% of all Continuing Education.
Weight Lifted: Up to 50 lbs, Frequently 31-65% of time
Weight Carried: Up to 20 lbs, Occasionally 0-30% of time
Vision: Moderate, Frequently 31-65%of time
Kneeling/Stooping/Bending: Occasionally 0-30%
Standing/Walking: Frequently 31-65%
Pushing/Pulling: Occasionally 0-30%
Intensity of Work: Occasionally 0-30%
Job Requires: Reading, Writing, Reasoning, Talking, Keyboarding
Working at NGHS means being part of something special: a team invested in you as a person, an employee, and in helping you reach your goals.
NGHS: Opportunities start here.
Northeast Georgia Health System is an Equal Opportunity Employer and will not tolerate discrimination in employment on the basis of race, color, age, sex, sexual orientation, gender identity or expression, religion, disability, ethnicity, national origin, marital status, protected veteran status, genetic information, or any other legally protected classification or status.
Official account of Jobstore.
Working Conditions:
Other duties as assigned
Knowledge, Skills & Abilities
Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Official account of Jobstore.
Beware of scams online or from individuals claiming to represent Convatec
A formal recruitment process is required for all our opportunities prior to any offer of employment. This will include an interview confirmed by an official Convatec email address.
If you receive a suspicious approach over social media, text message, email or phone call about recruitment at Convatec, do not disclose any personal information or pay any fees whatsoever. If you’re unsure, please contact us at careers@Convatec.com.
Equal opportunities
Convatec provides equal employment opportunities for all current employees and applicants for employment. This policy means that no one will be discriminated against because of race, religion, creed, color, national origin, nationality, citizenship, ancestry, sex, age, marital status, physical or mental disability, affectional or sexual orientation, gender identity, military or veteran status, genetic predisposing characteristics or any other basis prohibited by law.
Notice to Agency and Search Firm Representatives
Convatec is not accepting unsolicited resumes from agencies and/or search firms for this job posting. Resumes submitted to any Convatec employee by a third party agency and/or search firm without a valid written and signed search agreement, will become the sole property of Convatec. No fee will be paid if a candidate is hired for this position as a result of an unsolicited agency or search firm referral. Thank you.
Already a Convatec employee?
If you are an active employee at Convatec, please do not apply here. Go to the Career Worklet on your Workday home page and View "Convatec Internal Career Site - Find Jobs". Thank you!
Official account of Jobstore.
Key Job Accountabilities
Responsible for operating production test equipment, troubleshoot and repair defective products, maintain test equipment, monitor test performance and yield information, and provide technical support to other focus factory personnel.
Assembly/system level troubleshooting to component level.
Support implementation of engineering change orders.
Operate test equipment (may include flying probe, In-circuit test, functional).
Support the development of documentation for operational or technical training.
Support reactive maintenance (test equipment).
Adapts to changes (work plan, priority and management decision) in the work environment.
Supports improvement initiatives and participates actively to improve work environment (example 5S).
Looks for opportunities to improve work productivity and efficiency.
Able to work cooperatively in a team & cross-functional team(s) as needed.
Able to maintain a level temperament in a stressful environment.
Openly and proactively shares information, knowledge & experience with co-workers.
Education Requirements
Diploma or High Vocational Certificate in Electronics/ Electrical or related fields.
Official account of Jobstore.
Key Job Accountabilities
Responsible for operating production test equipment, troubleshoot and repair defective products, maintain test equipment, monitor test performance and yield information, and provide technical support to other focus factory personnel.
Assembly/system level troubleshooting to component level.
Support implementation of engineering change orders.
Operate test equipment (may include flying probe, In-circuit test, functional).
Support the development of documentation for operational or technical training.
Support reactive maintenance (test equipment).
Adapts to changes (work plan, priority and management decision) in the work environment.
Supports improvement initiatives and participates actively to improve work environment (example 5S).
Looks for opportunities to improve work productivity and efficiency.
Able to work cooperatively in a team & cross-functional team(s) as needed.
Able to maintain a level temperament in a stressful environment.
Openly and proactively shares information, knowledge & experience with co-workers.
Education Requirements
Diploma or High Vocational Certificate in Electronics/ Electrical or related fields.
Official account of Jobstore.
Job Family:
Office Services (Digital)
Travel Required:
Clearance Required:
What You Will Do:
We are currently searching for a Procurement Technician II to provide services and deliverables through performance of support services. This is a full-time, on-site opportunity in Hamilton, MT.
What You Will Need:
What Would Be Nice To Have:
What We Offer:
Guidehouse offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects our commitment to creating a diverse and supportive workplace.
Benefits include:
Medical, Rx, Dental & Vision Insurance
Personal and Family Sick Time & Company Paid Holidays
Parental Leave
401(k) Retirement Plan
Group Term Life and Travel Assistance
Voluntary Life and AD&D Insurance
Health Savings Account, Health Care & Dependent Care Flexible Spending Accounts
Transit and Parking Commuter Benefits
Short-Term & Long-Term Disability
Tuition Reimbursement, Personal Development, Certifications & Learning Opportunities
Employee Referral Program
Corporate Sponsored Events & Community Outreach
Care.com annual membership
Employee Assistance Program
Supplemental Benefits via Corestream (Critical Care, Hospital Indemnity, Accident Insurance, Legal Assistance and ID theft protection, etc.)
Position may be eligible for a discretionary variable incentive bonus
About Guidehouse
Guidehouse is an Equal Employment Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, citizenship status, military status, protected veteran status, religion, creed, physical or mental disability, medical condition, marital status, sex, sexual orientation, gender, gender identity or expression, age, genetic information, or any other basis protected by law, ordinance, or regulation.
Guidehouse will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable law or ordinance including the Fair Chance Ordinance of Los Angeles and San Francisco.
If you have visited our website for information about employment opportunities, or to apply for a position, and you require an accommodation, please contact Guidehouse Recruiting at 1-571-633-1711 or via email at RecruitingAccommodation@guidehouse.com. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodation.
Guidehouse does not accept unsolicited resumes through or from search firms or staffing agencies. All unsolicited resumes will be considered the property of Guidehouse and Guidehouse will not be obligated to pay a placement fee.
Official account of Jobstore.
Job Summary
Nutrition Service Relief Technician
Status: Part-time, PRN (as needed)
Shift: 8-16 hours weekly 11:00 a.m. to 7:00 p.m.
Schedule: Monday to Friday. Every other weekend required.
Location: Ludington Hospital, Ludington MI.
Starting at $15.44 per hour.
Primary Location
SITE - Ludington Hospital - 1 Atkinson Dr - LudingtonDepartment Name
Nutrition Services - LudingtonEmployment Type
Part timeShift
Variable (United States of America)Weekly Scheduled Hours
0.04Hours of Work
11:00 a.m .to 7:00 p.m.Days Worked
Monday to SundayWeekend Frequency
Every other weekendCURRENT COREWELL HEALTH TEAM MEMBERS – Please apply through Find Jobs from your Workday team member account. This career site is for Non-Corewell Health team members only.
Corewell Health is committed to providing a safe environment for our team members, patients, visitors, and community. We require a drug-free workplace and require team members to comply with the MMR, Varicella, Tdap, and Influenza vaccine requirement if in an on-site or hybrid workplace category. We are committed to supporting prospective team members who require reasonable accommodations to participate in the job application process, to perform the essential functions of a job, or to enjoy equal benefits and privileges of employment due to a disability, pregnancy, or sincerely held religious belief.
Corewell Health grants equal employment opportunity to all qualified persons without regard to race, color, national origin, sex, disability, age, religion, genetic information, marital status, height, weight, gender, pregnancy, sexual orientation, gender identity or expression, veteran status, or any other legally protected category.
An interconnected, collaborative culture where all are encouraged to bring their whole selves to work, is vital to the health of our organization. As a health system, we advocate for equity as we care for our patients, our communities, and each other. From workshops that develop cultural intelligence, to our inclusion resource groups for people to find community and empowerment at work, we are dedicated to ongoing resources that advance our values of diversity, equity, and inclusion in all that we do. We invite those that share in our commitment to join our team.
You may request assistance in completing the application process by calling 616.486.7447.
Official account of Jobstore.
Machine Maintenance:
Machine Repairs:
Documentation:
Safety Compliance:
Technical Support:
Emergency Response:
Inventory Management:
Continuous Improvement:
Knowledge, Skills & Abilities:
Working Conditions
Reports to:
Chad Baker
Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Official account of Jobstore.
Job Title
Light Maintenance TechnicianJob Description Summary
Job Description
Light Maintenance Technician
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues—keeping our client’s facility running smoothly all the time.
What’s The Job?
Title: Light Maintenance Technician
Location: Eddyville, Iowa
Wage: up to $20.50 (Depending on experience)
Hours: Mon, Tues, Thurs, Fri - 6AM to 4:30PM
What’s in it for me?
Weekly pay on Fridays
Comprehensive benefits that start on your first day
Advancement opportunities
Training to work in a cutting-edge facility
Company provided safety apparel and uniforms
What Will I Be Doing?
Here are just a few things you can expect to do daily:
Team member must be able to work and direct personnel in a team-oriented and safety conscious environment. “Safety First” expectations include, but are not limited to, PJHA process, Observation process, and compliance with all company / site safety guidelines and procedures.
Assigned tasks list to include, but not limited to, sanitation and cleaning of assigned areas following master cleaning schedules and procedures
This position may require moderate supervision and follow-up.
Sanitation and cleaning consist of washing down, shoveling, and sweeping, cleaning screens with the aid of respirator.
Maintain adherence to work schedule and work overtime, weekends, holidays, and shifts as required.
Assist in some maintenance, railroad, and groundwork such as (mowing, trimming, landscaping, and snow removal).
Must have working knowledge and be trained to operate the following: skid steer loaders, scissors lifts, boom lifts, forklifts, and hand & power tools. Clean screens and wear a respirator.
“Effectively” communicate with supervisor and customer to accomplish assigned tasks and develop sound customer relations.
Maintain adherence to the published work schedule and be available to work overtime as required by demands of the job.
Work from elevated areas such as ladders, platforms, scaffolding, etc. utilizing fall protection equipment when required by the job
Maintain communication with supervisor regarding unresolved work issues, personnel issues, and employee complaints.
Work all shifts including holidays and weekends when demanded by the job.
Perform other work as defined by company and/or customer.
Ensures compliance with all company / customer regulations, policies, and procedures.
Achieve performance expectations set forth as part of performance appraisals to include employee development planning.
Communications with all team members to assist the development of short- and long-range planning in assist of the company’s goals and objectives
Meet physical requirements of the job. Physical requirements of the job will be provided to you prior to employment.
Perform assigned tasks in a safety, effective, and efficient manner.
Accurate and timely administrative duties to include, but not limited to, time accounting and work order completion.
Must maintain positive customer and employee relations.
What Makes Me Qualified?
Don’t meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
Experience: 0-2 years in industrial cleaning desirable
What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The ability to observe details at close range (within a few feet of the observer).
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Manual Dexterity — The ability to quickly grasp, manipulate, or assemble objects.
Substantial lifting (up to 50 pounds) is required
Ability to move for extended or continuous periods of time
Ability to ascend and descend staircases, ladders, and/or step stools
Ability to operate applicable hand tools, power tools, and equipment
Ability to operate forklifts or other vehicles in a safe manner
Ability to wear a respirator while performing job duties
Communication/ Expression —The ability to communicate information and ideas so others will understand.
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration.
The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
#INDCWS
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
Official account of Jobstore.
Job Title
Water Blast & Vacuum TechnicianJob Description Summary
Job Description
Water Blast & Vacuum Technician
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues—keeping our client’s facility running smoothly all the time.
What’s The Job?
Title: Water Blast & Vacuum Technician
Location: Eddyville, Iowa
Salary: Up to $25/hourly - depending on experience
Hours: Monday - Thursday 6am-4:30pm
What’s in it for me?
Weekly pay on Fridays
Comprehensive benefits that start on your first day
Advancement opportunities
Training to work in a cutting-edge facility
Company provided safety apparel and uniforms
What Will I Be Doing?
Here are just a few things you can expect to do daily:
Team member must be able to work in a team oriented and safety conscious environment. “Safety First” expectations include, but are not limited to, PJHA process, Observation process, and compliance with all company / site safety guidelines and procedures.
Assigned tasks list to include, but not limited to, vacuum waste and spilled product, water blast clean machines and areas, and lance clean lines and pipes. Must be able to handle up to 10,000 psi water pressure flowing through the handheld cleaning equipment.
This position may require constant supervision and follow-up.
Provide sanitation and cleaning assistance as needed for shoveling; snow removal; pesticide application; and general area clean up.
Assist in formulating standards / work procedures while performing those duties and provide work order feedback on discrepancies noted in service delivery.
Must have working knowledge and be able to operate the following: skid loaders, scissors lifts, aerial lifts, forklifts, RTFL, and hand / power tools.
“Effectively” communicate with supervisor and customer to accomplish assigned tasks and develop sound customer relations.
Maintain adherence to the published work schedule and be available to work overtime as required by demands of the job. This includes days, nights, and weekends as needed. Work all shifts including holidays and weekends when demanded by the job.
Work from elevated areas such as ladders, platforms, scaffolding, etc. utilizing fall protection equipment when required by the job and situation. Employee must be able to work in confined spaces, wear a respirator, fall protection equipment and other necessary PPE as required by the job functions. This could include, but may not be limited to, special blast suits, boots, and gloves as well as standard PPE equipment. Employee must be able to work in awkward positions for long periods of time, stand for long periods of time, walk long distances, and climb excessive stairs.
Maintain communication with supervisor regarding unresolved work issues, personnel issues, and employee complaints. Employee must be able to evaluate a site for safety hazards and communicate with supervisor if the area is felt to be unsafe. Employee will be required to maintain and communicate using a company radio.
Must maintain a consistent and good attendance record in accordance with Company policy
Perform other work as defined by company and/or customer.
Ensures compliance with all company / customer regulations, policies, and procedures.
Achieve performance expectations set forth as part of performance appraisals to include employee development planning.
Communications with all team members to assist the development of short- and long-range planning in assist of the company’s goals and objectives.
Meet physical requirements of the job. Physical requirements of the job will be provided to you prior to employment.
Perform assigned tasks in a safe, effective, and efficient manner.
Accurate and timely administrative duties to include, but not limited to, time sheets and work order completion.
Must maintain positive customer and employee relations
What Makes Me Qualified?
Don’t meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
Experience: 2 years in industrial cleaning desired but not required
License: Must possess a valid driver’s license; may be required to possess a CDL license depending on local, state, and site requirements
What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The ability to observe details at close range (within a few feet of the observer).
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Manual Dexterity — The ability to quickly grasp, manipulate, or assemble objects.
Substantial lifting (up to 50 pounds) is required
Ability to move for extended or continuous periods of time
Ability to ascend and descend staircases, ladders, and/or step stools
Ability to operate applicable hand tools, power tools, and equipment
Ability to operate forklifts or other vehicles in a safe manner
Ability to wear a respirator while performing job duties
Communication/ Expression —The ability to communicate information and ideas so others will understand.
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration.
The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
Official account of Jobstore.
Job Title
Water Blast & Vacuum TechnicianJob Description Summary
Job Description
Water Blast & Vacuum Technician
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues—keeping our client’s facility running smoothly all the time.
What’s The Job?
What’s in it for me?
What Will I Be Doing?
Here are just a few things you can expect to do daily:
What Makes Me Qualified?
Don’t meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration.
The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
Official account of Jobstore.
Job Title
Mechanical TechnicianJob Description Summary
Job Description
Mechanical Technician
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues—keeping our client’s facility running smoothly all the time.
What’s The Job?
Title: Mechanical Technician
Location: Eddyville, Iowa
Salary: up to $34.25/hr (DOE)
Hours: Monday - Thursday 6am - 4:30p
What’s in it for me?
Weekly pay on Fridays
Comprehensive benefits that start on your first day
Advancement opportunities
Training to work in a cutting-edge facility
Company provided safety apparel and uniforms
What Will I Be Doing?
Here are just a few things you can expect to do daily:
Team member must be able to work in a team oriented and safety conscious environment. “Safety First” expectations include, but are not limited to, PJHA process, Observation process, and compliance with all company / site safety guidelines and procedures.
Assigned tasks list to include, but not limited to repairs and preventive maintenance on pumps, conveying systems, piping, heat exchangers, power transmissions, and other power-driven rotating equipment. Repairs and preventive maintenance to be performed in conformance with established standards. Expectation of task completion to range from task completion with direct supervision to task completion without supervision, reliant upon assigned tasks and employee’s development.
This position requires the employee to work without supervision.
Assist in formulating preventive maintenance standards / work procedures while performing those duties and provide work order feedback on discrepancies noted in service delivery.
Must have working knowledge of the following topics: using hand / power tools, precision alignment, rigging, pipefitting, welding, blueprint reading, mathematics, Preventive/Predictive Maintenance.
Employee will perform any and all other duties that are assigned by the responsible supervisor.
Must be able to use hand tools on a daily basis such as power tools (hand grinders, saws, impact wrenches, drill press, and hydraulic pullers), and rigging equipment. Also perform welding, using a cutting torch as required.
Must be able to operate and have knowledge of simple and complex heavy industrial equipment such as forklifts, scissors lifts, basket trucks, and skid loaders.
Works from elevated areas such as ladders, platforms, scaffolding, etc. utilizing fall protection equipment as necessary to complete tasks
Must have the flexibility to work all shifts including holidays and weekends as demanded by the job.
Ensures compliance with all company / customer regulations, policies, and procedures.
Achieve performance expectations set forth as part of performance appraisals to include employee development planning.
Communications with all team members to assist the development of short- and long-range planning in assist of the company’s goals and objectives
Maintain personal tools required for your job to include an up to date documented personal tool list. Required tool listing to be supplied as part of employment.
Meet physical requirements of the job. Physical requirements of the job will be provided to you prior to employment.
Perform assigned tasks in a safe, effective, and efficient manner.
Accurate and timely administrative duties to include, but not limited to, time accounting and work order completion.
Must maintain positive customer and employee relations.
What Makes Me Qualified?
Don’t meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
Education: Possess a high school degree or an approved GED. AA degree in Industrial Maintenance preferred, but not required.
Experience: 5+ years' experience in industrial maintenance and/or 4+ years education in industrial maintenance technologies / engineering preferred.
What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The ability to observe details at close range (within a few feet of the observer).
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Manual Dexterity — The ability to quickly grasp, manipulate, or assemble objects.
Substantial lifting (up to 50 pounds) is required
Ability to move for extended or continuous periods of time
Ability to ascend and descend staircases, ladders, and/or step stools
Ability to operate applicable hand tools, power tools, and equipment
Ability to operate forklifts or other vehicles in a safe manner
Ability to wear a respirator while performing job duties
Communication/ Expression —The ability to communicate information and ideas so others will understand.
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration. The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
Official account of Jobstore.
Ludington Hospital - 1 Atkinson Dr - Ludington
Schedule: Part Time Evening, 2nd shift, 3 p.m. to 11:30 p.m.
Pay: $15.44/HR + $1/HR Incentive pay
Primary Location
SITE - Ludington Hospital - 1 Atkinson Dr - LudingtonDepartment Name
Environmental Services - LudingtonEmployment Type
Part timeShift
Evening (United States of America)Weekly Scheduled Hours
0.04Hours of Work
3 p.m. to 11:30 p.m.Days Worked
Monday to SundayWeekend Frequency
Variable weekendsCURRENT COREWELL HEALTH TEAM MEMBERS – Please apply through Find Jobs from your Workday team member account. This career site is for Non-Corewell Health team members only.
Corewell Health is committed to providing a safe environment for our team members, patients, visitors, and community. We require a drug-free workplace and require team members to comply with the MMR, Varicella, Tdap, and Influenza vaccine requirement if in an on-site or hybrid workplace category. We are committed to supporting prospective team members who require reasonable accommodations to participate in the job application process, to perform the essential functions of a job, or to enjoy equal benefits and privileges of employment due to a disability, pregnancy, or sincerely held religious belief.
Corewell Health grants equal employment opportunity to all qualified persons without regard to race, color, national origin, sex, disability, age, religion, genetic information, marital status, height, weight, gender, pregnancy, sexual orientation, gender identity or expression, veteran status, or any other legally protected category.
An interconnected, collaborative culture where all are encouraged to bring their whole selves to work, is vital to the health of our organization. As a health system, we advocate for equity as we care for our patients, our communities, and each other. From workshops that develop cultural intelligence, to our inclusion resource groups for people to find community and empowerment at work, we are dedicated to ongoing resources that advance our values of diversity, equity, and inclusion in all that we do. We invite those that share in our commitment to join our team.
You may request assistance in completing the application process by calling 616.486.7447.
Official account of Jobstore.
Job Title
Industrial Electrical TechnicianJob Description Summary
Job Description
Industrial Electrical Technician - Skilled
Who Are We?
C&W Services is the industry leader in cutting-edge maintenance and janitorial programs for facilities ranging corporate office portfolios and manufacturing plants to large public venues—keeping our client’s facility running smoothly all the time.
What’s The Job?
Title: Industrial Electrical Technician
Location: Eddyville, Iowa
Salary: up to $37/hr (DOE)
Hours: Monday - Thursday 6am-4:30pm
What’s in it for me?
Weekly pay on Fridays
Comprehensive benefits that start on your first day
Advancement opportunities
Training to work in a cutting-edge facility
Company provided safety apparel and uniforms
What Will I Be Doing?
Here are just a few things you can expect to do daily:
Team member must be able to work in a team oriented and safety conscious environment. “Safety First” expectations include, but are not limited to, PJHA process, Observation process, and compliance with all company / site safety guidelines and procedures.
This position requires the employee to work without supervision.
Must be able to use hand tools on a daily basis such as power tools
Willing to work all shifts including holidays and weekends when demanded by the job.
Work from elevated areas (ladders, platforms, scaffolding, and others as required) utilizing fall protection equipment when needed.
Must be able to work in confined spaces as necessary to complete tasks
Must be able to operate and have knowledge of simple and complex heavy industrial equipment such as forklifts, scissors lifts, boom lifts, and skid loaders.
Must be able to adhere to the published work schedule while being flexible in hours based on workload
Work without direct supervision on daily assigned work.
Maintain compliance with all company & customer regulations, policies, and procedures
Must be able to utilize industrial powered vehicles (RTFL, Forklift, Aerial Lift, Scissor Lift)
Must have a working knowledge and proficiency with installing, repairing, and maintaining industrial electrical components and equipment including lighting, motors, inverters, soft starts and wye-delta systems. Must have a working knowledge of schematics, mathematics, preventive/predictive technologies, basic computer literacy, safe electrical test, and measurement best practices. Cut, thread, bend and install raceway (conduit) and cable trays in an industrial setting; Install wire through raceway and cable trays to be tested by MCA; Must be aware and able to follow standards laid out by NECA 101
Must have an awareness and be able to perform calibration and documentation of functions pertaining to the key elements of: Flow Measurement, Level Measurement, Pressure, Temperature, Analytical Instrumentation; Must be able to troubleshoot process control loops – using key elements and specialized testing equipment.
Ensures compliance with all company / customer regulations, policies, and procedures.
Achieve performance expectations set forth as part of performance appraisals to include employee development planning.
Maintain personal tools required for your job to include an up to date documented personal tool lists. Required tool listing to be supplied as part of employment.
Meet physical requirements of the job. Physical requirements of the job will be provided to you prior to employment.
Perform assigned tasks in a safe, effective, and efficient manner.
Accurate and timely administrative duties to include, but not limited to, time accounting and work order completion.
Must maintain positive customer and employee relations.
What Makes Me Qualified?
Don’t meet all of the requirements but are still interested in working for us? Please apply and we will review your resume for other roles!
Education: Possess a high school degree or an approved GED.
Ability to obtain State Journeyman Electrical License upon meeting state required qualifications; ability to obtain ISA’s CCST Level 1 Certification.
Experience: 5+ years of electrical and controls experience and/or 4+ years of education in Electronics or Industrial Electricity preferred.
Must have current valid driver’s license
What are the physical demands of the role?
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The ability to observe details at close range (within a few feet of the observer).
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Manual Dexterity — The ability to quickly grasp, manipulate, or assemble objects.
Substantial lifting (up to 50 pounds) is required
Ability to move for extended or continuous periods of time
Ability to ascend and descend staircases, ladders, and/or step stools
Ability to operate applicable hand tools, power tools, and equipment
Ability to operate forklifts or other vehicles in a safe manner
Ability to wear a respirator while performing job duties
Communication/ Expression —The ability to communicate information and ideas so others will understand.
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
What is the work environment?
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable employees with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration. The employee is occasionally exposed to extreme heat and extreme cold, wet and/or humid conditions. The noise level in the work environment is usually very loud.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
Official account of Jobstore.
If you don't have a Malaysian citizenship, but are living in Malaysia or if you are planning to move to Malaysia and are looking for jobs that can sponsor you, it is up to each individual employer on how it handles international candidates. We encourage you to read our blog post to help provide more information: 7 Easy Steps to Find Jobs in Malaysia As A Foreigner.
Have you tried following up? If you did not follow up with an email or phone call, how do you determine if the company received your job application? Enquire where they are in the review process and and then ask if they received your submission. While it would be great to receive a response from the company, sometimes it doesn’t happen. Take the initiative to follow to ensure your application has been received.
The period of the application process will vary, depending on the type of job you are applying for and your previous employment experience.
There are 6 position levels and each level can be associated with a salary range and different types of job titles. Jobs levels can be categorised into: non-executive, fresh/entry level, junior executive, senior executive, manager and senior manager.
Within Jobstore, there are hundreds of variations of jobs. Read through the job descriptions to find out about the typical responsibilities and employers for each job, so you can see what’s involved and who might employ you.