Total 1,869 civil engineer job vacancies in Maintenance / Repair category in Malaysia

Responsibilities:

To maintence the facilities and machines such as the paper press machines and iron bar press machines

To maintence the electronic, and make sure it working

To keep the working site in clean and safe

To supervise maintenance technician to ensure daily tasks are carried out as planned

Carry out facilities operations and maintenance work.

Requirements:

At least 3 year’s relevant experience

Having relevant educational certificate is an advantage

Good attitude and self motivated is required

Can adapt the alternate shift

Job Scope

• Defines the discipline scope of work and the required resources, and develops input for the I&C Execution Plan.

• Checks all design deliverables made by designers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice.

• Participates in daily scrum meetings, project status meetings and is responsible for correct reporting of amongst other project status, progress, delays, change notices, performance measurement, lessons learned and close-out

• Takes personal responsibility for safety and a healthy environment on the projects, and demonstrating this by example

• Undertake developmental activities like preparation of work instructions / procedures / guidelines

• Responsible for issue of all I&C deliverable documents and Sizing of Control valves, PRVs and orifices and preparation of Instrument data sheets and instrument index

Requirements

• Bachelor or Master’s Degree in Instrumentation / Control System Engineering.

• Minimum 5 years of relevant experience in C&I design engineering and commissioning works within oil&gas,petrochemical and other industrial projects

• Responsible for the maintenance and operation of electrical systems.
• Consistent performance monitoring and ensuring highest uptime.
• Project management for new equipment installations.
• Identify system abnormalities and provide technical solutions through troubleshooting.

Requirements:

• Degree in Electrical Engineering or equivalent.
• At least 3 years of experience in project installation of electrical distribution, as well as operation and maintenance of Transformers, LV and MV switchboards, UPS, Motors, Frequency converters, and power distribution systems.
• Familiarity with low voltage systems such as Fire protection, CCTV, PA, and network systems.
• Capable of analyzing protection circuits, single line drawings, and control circuits.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Recruit4staff is proud to be representing their client, a leading company in their search for a Multi-Skilled Maintenance Engineer to work in their leading facility in Market Drayton.

For the successful Multi-Skilled Maintenance Engineer our client is offering:

• £47,000 - £50,000 per annum
• 7:00 - 7:00, 4 on 4 off (days and nights)
• Permanent position
• Free parking
• Annual 5% bonus
• Benefits package including life assurance and health care cover

The Role - Multi-Skilled Maintenance Engineer:

• To diagnose faults and to test, repair, and maintain Mechanical / Electrical equipment
• Uses PMS to support prioritisation and problem-solving (RCFA)
• Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on-site
• Analyse trends in reoccurring faults and breakdowns and Reduce downtime of current equipment
• Use and support departmental 5s programmes for workshops and stores
• Developing and recording all engineering activities carried out by use of the Electronic Maintenance Management System

• All functions to be carried out in accordance with ISO 9001:2000 quality management standard

What our client is looking for in a Multi-Skilled Maintenance Engineer:

• Recognised Electrical/Mechanical apprenticeship - ESSENTIAL
• Experience within the manufacturing industry - ESSENTIAL
• Electrical Bias - DESIRABLE
• Food/FMCG background - DESIRABLE
• IOSHH/Nebosh

Alternative job titles:
Mechanical Maintenance Engineer, Mechanical Engineer, Shift Engineer, Maintenance Engineer

Commutable From:
Bolton, Wigan, Rochdale, Oldham, St Helens, Stockport, Blackburn, Huddersfield, Macclesfield, Warrington

For further information about this and other positions please apply now

This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business

Component Repair Engineer

A critical addition to the team following significant investment and development you will ne an experienced Engineer with significant hands-on Gas Turbine experience. Mosty likely ex-forces or oil and gas you will be working from the companY;S Tayside headquarters. A salary and benefits package will run inline with your experience but what is most important is getting the right person with a great work ethic and attitude and a desire to push and deliver more.

* The development, planning and implementation of repair work scopes for gas turbine components.
* Production of documentation / drawings, tooling design etc.
* Communication and support to customers, suppliers, and internal personnel.
* Application of new Product Introduction (NPI) principles and working within a gated process
* Focus on the key performance indicators of Safety, Quality, Delivery and Cost.

The successful applicant will be able to demonstrate:
* Experience of weld / braze / heat treat / NDT
* Experience in the production of FAIR documentation.
* Ability to plan work scopes and estimate tasks.
* Prior experience of working within a continuous improvement environment and the ability to drive improvement actions.
* An understanding of standard engineering principles and processes.
* Problem solving and ability to work with minimal product information.
* Ability to develop, discuss and describe engineering solutions to technical issues.
* The capability to handle multiple projects / scopes of work simultaneously.
* Equally capable of working on own initiative or as part of a team.
* Have well developed inter-personal and communication skills.
* AutoCAD capability / MS software literacy.
Internal Stakeholders are:
* Customer Support - customer specific requirements and contract review
* Logistics - Sub-con scheduling
* Purchasing - Sub-con order placement
* Quality - involvement in NCR investigation
* Operations - planning of NPI work and production support
The candidate selected for this position will be experienced in their role with a relevant qualification or approval by the engineering manager and will have direct relevant experience in an industrial/aero/ manufacturing environment.

The candidate selected for this position will be:
* Degree / HND qualification or completion of apprenticeship.
Advantageous:
* Aerospace or gas turbine component repair experience.
* Technical knowledge of tool design and manufacture.
LEAN/continuous improvement principles and techniques.

If this description sounds like it meets your professional and personal aspirations please click on the APPLY button and follow the instructions.

Site Maintenance Engineer - Manufacturing
Up to £39,000 dependent on experience
Daventry, Northants
Monday to Friday - Days - 42 hours
Permanent

Our client are a world leading, innovative formulations and manufacturing company based in Daventry, Northamptonshire. They are currently looking to recruit a permanent Site Maintenance Engineer - Manufacturing

The role:
Under minimal supervision perform highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Maintain and improve facilities.

Site Maintenance Engineer - Manufacturing responsibilities:

• Perform highly diversified duties to install and maintain production machines and the plant facility's equipment
• Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service
• Perform simple machinist duties and responsibilities
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines
• Read and interpret equipment manuals and work orders to perform required maintenance and service
• Manage external contractors carrying out maintenance work on site - induction, permit-to-work, monitoring performance
• Identify improvements to buildings, services and equipment - carry out design, fabrication, installation and commissioning work within scope of capabilities
• Diagnose problems, replace or repair parts, test and make adjustments
• Perform regular preventive maintenance on machines, equipment and plant facilities. Perform a variety of plumbing maintenance and carpentry functions
• Use a variety of hand and power tools, electric meters and material handling equipment in performing duties
• Detect faulty operations, defective material and report those and any unusual situations to proper supervision
• Assist Health & Safety with statutory inspections and regulatory compliance
• Comply with safety regulations and maintain clean and orderly work areas
• Perform all other duties as assigned or needed.
• Track and maintain electronic records on all maintenance and repairs to machines and facility
• Request Purchase orders from purchasing department for materials required
• Source new suppliers for maintenance services or products
• Control maintenance budget and spending
• Report and maintain repairs and projects in internal electronic systems
• Direct and delegate workload to maintenance personnel

Site Maintenance Engineer - Manufacturing requirements:

• Experience in multi-skilled maintenance work
• Experience in organising & dealing with contractors
• Experience in electrical work
• Experience in plumbing and water system maintenance
• Able to manage own workload and work without supervision

Please apply with a copy of your CV in the first instance.

CPDaventry

The Recruitment Co. is an equal opportunities employer and we're committed to diversity and inclusion in the workplace.

Life at Grab
At Grab, every Grabber is guided by The Grab Way, which spells out our mission, how we believe we can achieve it, and our operating principles - the 4Hs: Heart, Hunger, Honour and Humility. These principles guide and help us make decisions as we work to create economic empowerment for the people of Southeast Asia.

Get to know the Team
GrabAds allows Advertisers, Agencies, and Merchants to engage the Grab Audience via innovative online and offline advertising experiences. Through our unique ecosystem and transacting user base, our clients are able to reach their desired audiences at scale, while driving measurable business outcomes. We would want to invite talented and passionate engineers to join our journey, to create value for our consumers, drivers, merchants, and advertising partners, while continuing to make everyday lives better across Southeast Asia.

Get to know the Role
You will develop machine learning models and strategies to predict the most relevant items in the user journey. You will drive real-world impact through innovative data-driven technology. You will drive the development and iteration of the algorithm and ensure that improvements roll out successfully.

The Day-to-Day Activities

• Conceptualise and develop machine learning models to understand, classify and predict user behaviors in different scenarios. Deploy, test and maintain them.
• Design and conduct both offline and online experiments to validate hypotheses.
• Design and implement algorithms to derive deep insights and identify trends, patterns and relationships from high-volume high-dimensional data.
• You are required to participate in code and design reviews with peers to maintain our high-standard engineering practice.
• You will participate in on-call rotations with engineers. Troubleshoot, mitigate, and resolve issues.

The Must-Haves

• You have Heart, Hunger, Honour and Humility.
• Master's Degree or above in Computer Science, Electrical Engineering, Software Engineering, Automation, Data Science, or other Computer Science related majors.
• You have a minimum of 2 years of relevant experience in developing Machine Learning models for systems including Ads/RecSys/Search.
• Be familiar with model optimization methods and tricks, and be familiar with deep learning frameworks (TensorFlow/ps-lite/PyTorch)
• Familiar with one or more of the following programming languages: Python/Golang/Java/C++
• Be familiar with the Hadoop ecosystem, and be familiar with modern data processing stacks (e.g. Hive, Presto, Spark, Kafka, HBase, Flink etc.)
• Strong understanding of statistics, data analysis, and data visualization techniques.
• Excellent communication and collaboration skills with a team-oriented mindset, with the ability to work effectively with cross-functional teams.

The Nice-to-Haves

• Be proactive and always be ready to tackle challenging tasks.
  Collaborating with multiple teams to facilitate rapid growth and development.
• Be familiar with user behavior modeling, feature crossing technique, bid optimization strategy including oCPC, and keyword recommendation.
• Proven track record/ accolades in data/ AI-related competitions (e.g. KDD Cup/Kaggle) or programming competitions (e.g. ICPC).
• Proficient in one or more of the following programming languages: Golang/Java/C++/Scala
• Experience in machine learning with cloud platforms (e.g. AWS)
  

Our Commitment
We are committed to building diverse teams and creating an inclusive workplace that enables all Grabbers to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation and other attributes that make each Grabber unique.

Shift Maintenance Engineer

Wednesfield

Salary: £35,400 - £42,480 per annum including shift allowance, must be qualified nvq 3

Must be able to weld, fault find and repair hydraulics work with cylinders and read technical drawings and be qualified NVQ level 3 must have experience with slitters and presses.

Acorn by Synergie have an exciting opportunity for a motivated and established Shift Maintenance Engineer / Technician to join our client's team based at their site in Wednesfield.

What You Will Do

You would support our client's operations teams by performing necessary breakdown repairs, leading preventative maintenance activity and facilitating the promotion of engineering solutions for process improvement to ensure process availability and productivity are optimised.

PRINCIPAL ACCOUNTABILITIES:

Health & Safety

* Perform activities. Ensure appropriate actions are implemented in order to eliminate risk.

Planned Maintenance / Breakdowns

* Working to planned schedules perform planned maintenance activities in line with documented / engineering practices. Maintain and repair processing machinery and ancillary equipment in line with documented / engineering practices in a safe and productive manner in order to maximise availability at optimum cost.

* Give feedback to the Maintenance planning function regarding issue / root cause / emerging work

* Ensuring clear and concise records are maintained in order trends can be determined and corrective actions identified.

* Through utilisation of the Planned Maintenance system ensure engineering spares and inventory on site are managed within budget constraints and equipment downtime is minimised.

* Facilitate optimal performance by working flexibly within the team and the context of the site, undertaking maintenance at short notice.

Training / Resource

* Be actively involved in own personal development plans to maximise performance in the role and the contribution to succession requirements of the business.

* Support the Operational team members in the development of autonomous maintenance practices. Deliver training to operators in order they are able to understand and implement basic maintenance activities facilitating optimum productivity.

What You Will Need

The position requires an competent engineer with experience in Service Centre or manufacturing activities. The engineer should be qualified to ONC or City & Guilds Mechanical or ONC or City & Guilds Electrical.

* Demonstrable experience of a relevant engineering discipline, continuous improvement processes, preventative maintenance techniques and dealing with contractors.

* Ability to demonstrate excellent communication and organisational skills and be computer literate. The ability to work without close supervision, yet under pressure and to tight timescales is essential.

* A knowledge of and ability to apply Continuous Improvement techniques.

A significant benefits packages. For this role, you will benefit from:

• A market competitive salary
• 35 days holidays per annum
• Annual Pay Review
• Annual Bonus Scheme - subject to business performance
• One of the UK's leading defined contribution pension schemes (10% employer contribution

Acorn by Synergie acts as an employment agency for permanent recruitment.

Proud member of the Disability Confident employer scheme

Responsibilities

• Development of Functional Design Specifications, Software Design Specifications, Control Schematics/ Write-up and another software/ test documentation.
• Responsible for project implementation, knowledge in writing programming and developing of PLC .
• Responsible for engineering, configuring, programming and/or supervising external programmers, and testing of PLC , CMS and SCADA software
• Site commissioning of control system with respect to Instrument, Electrical and Package IC (Candidate who has site PLC/SCADA experience will have added advantage)
• Ensure projects complete within given lead time
• Ensure products meet customer requirements
• Co-ordination of project with customers and suppliers
• Interface design, implementation and testing between various third-party systems using Field Bus, Modbus, BACnet and all other protocols
• Lead supervisors and technicians in PLC/ DCS field work at sites
• Implement and propose improvement works to clients
• Responsible for preparation of Instrument list , Instrument Data-sheets , Instrument cable schedules , FAT/ SAT procedures, conducting FAT/ SAT and signing-off FAT with client
• Prior knowledge of hazardous zoning and ATEX certification an advantage
• Preferably experience with Burner Management Systems

Requirements

• Diploma / Degree in Electronics/ Communication/ Electrical Engineering with 3 to 5 years relevant experience in automation/process industry
• Project Site experience within the Environmental (Wastewater & High Temperature Incineration Plant) Industry sector would be advantageous, including areas such as portable water production and distribution and waste water treatment is preferred.
• Experience in drive automation, PLC, CMS , SCADA and HMI technology
• Independent and self-motivated with good initiative and communication skills
• Able to work under minimum supervision
• Able to travel overseas when required
• Strong passion of leadership for project achievements
• Knowledge and experience in network technologies is preferred (Ethernet, TCP/ IP, Fibre Optic, Modbus, Field Bus, CANBUS, etc.)
• Prior knowledge and certification with Siemens PLC S7 series preferred
• Experience with Yogokawa Centum and Schneider PLC and advantage
• Independent and self-motivated with good analytical skills

1. Oversee to ensure timely maintenance of all molding presses, robotic and auxiliary equipment and proper records are done as per instruction machine manual. Familiarize with safety precautions before operating the system or carrying out any maintenance activities.
2. Work with Production Supervisor in executing preventive maintenance according to monthly, half yearly and yearly PM. Supervise and manage team of Maintenance Technician’s that perform breakdown repair and routine PM program.
3. Respond to breakdowns and diagnose root cause analysis.
4. Be involved and participate in maintenance routines to ensure that maintenance activities are scheduled and executed in time.
5. Make full use of the Machine Management System (MMS), the objective is

• To record machines detail information.
• To trace machine status and maintenance details.
• To monitor preventive maintenance execution.

· Perform regular inspection for machines & equipment.

· Conduct regular cleaning machines & equipment.

• To measure and generate report for repair traceability and effectiveness.

6. Supervising and manage team of Maintenance Technician’s that perform breakdown repair and routine

preventive maintenance program (monthly, half yearly & yearly).

7. Liaise with vendor for repair, fabrication, spare parts and modification work.

8. Lead in performance testing, commissioning, qualification (IQ) activities.

9. To ensure certification of calibration of machines and auxiliary equipment are updated and able to analyze

the outcome of result.

10. Identify spares and analyze the requirements and control log usage to ensure quick replacement to reduce

downtime.

11. Deal with emergencies, unplanned problems and repairs.

12. Standby for any emergency repair after office hours / weekend and public holidays.

13. Conduct monthly checks and audit of Good Documentation Practices (GDP), ISO 13485:2016, ISO 9000:2015

and of all records.

14. To ensure safe work practices concerned with the minimum risk from danger or hazard, protection from or

not being exposed to the risk of harm or injury during the process carrying out maintenance works.

15. To establish training program on maintenance Technicians such as develop training material, scheduling to

conduct training and performance monitoring.

16. Perform any other tasks as assigned.

Job Description

• Industry/ Organization Type: Logistics/ Production
• Position Title: Assistant Facilities Engineer
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, office hours
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Monitor everyday activities related to facilities and manage repair tasks.
• Identify issues with equipment or facilities and perform simple repairs.
• Oversee the work of vendors and maintenance staff to ensure all facilities are working correctly.
• Obtain and finalize permits needed for vendors to carry out their work.
• Keep all on-site facilities in excellent condition, making sure all maintenance records are accurately completed and processed.
• Take on unique projects or tasks as directed by your Supervisor or Manager.
• Train Facility Technicians, improving their understanding and skills in maintenance systems.
• Lead investigations to find out why equipment or facilities have failed.
• Develop maintenance schedules to prevent future equipment or facility issues.
• Regularly inspect and uphold all operating equipment and facilities to ensure they meet service standards.

APPLY NOW!!!

• At least Diploma in Facilities Management, or any engineering principle.
• Minimum 3 years of related working experience.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66149 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

My market leading, FM client are hiring a skilled and experienced electrical maintenance engineer to join their team, focusing on s commercial office based in Central London. This is an exciting opportunity for individuals who are passionate about maintenance and are looking for an opportunity to progress in FM.

• Monday - Friday (plenty of overtime available) or Shift work available
• Static - High end commercial office
• £42,000 - £43,000
• Career progression

Responsibilities:

• Electrical - Lighting (Small installation, Fault-finding, Lamping, Changing ballast)
• Power distribution
• PPM's
• Generators
• Pumps, Motors, Seals, Bearings
• Emergency lighting
• Air Conditioning
• Air Handling Units / Fan Coil Unit
• Chillers
• BMS System
• UPS Systems
• Plant rooms

Requirements:

• NVQ / C&G Level 3 in electrical installation and/or Level 3 electrical apprenticeship
• 17th/18th edition
• Proven experience as an Electrical Maintenance Engineer in building services (commercial offices, hospitals, or critical environment preferable)
• Strong knowledge of electrical systems, components, and troubleshooting techniques.
• Plans to grow and climb the ranks in a company

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Company Overview:

I am currently assisting a leading and one of the largest FM service providers with their ongoing search for electrical maintenance engineer to work on high end, commercial office in the heart of the City.

• Salary Range: £45k-£48k (dependant on experience & qualifications)
• Location: Static - commercial building in central London
• 12-hour shifts on a 4 on 4 off

Responsibilities:

1. Perform routine maintenance and inspections of electrical systems, including lighting, power distribution, and emergency systems.
2. Diagnose and troubleshoot electrical issues, implementing timely and effective solutions to minimise downtime.
3. Conduct preventive maintenance activities to extend the lifespan of electrical equipment and systems, including: UPS, transformers, Circuit breakers, distribution boards/panels and HVAC power supply.
4. Stay current with industry standards, codes, and regulations, ensuring compliance in all electrical maintenance activities.
5. Maintain accurate records of maintenance activities, equipment status, and service reports.
6. Building maintenance systems

Requirements:

1. NVQ / C&G Level 3 in electrical installation and/or Level 3 electrical apprenticeship
2. 17th/18th edition
3. Proven experience as an Electrical Maintenance Engineer in building services (commercial offices, hospitals, or critical environment preferable)
4. Strong knowledge of electrical systems, components, and troubleshooting techniques.
5. Plans to grow and climb the ranks in a company

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

With an increased focus on sustainability, biology, product development and digitalisation, ScaleAQ ensures that the development of technology takes place on terms of biology and the environment. We do this by producing and delivering technology, infrastructure, and services in a sustainable and innovative way.

Within the UK company we have a customer base across all the main aquaculture producing regions in Scotland and Ireland, with three key locations in Scotland (Fort William, Shetland & the Western Isles). We have the ability to deliver a fast and reliable service to all our customers, with local presence and knowledge at the heart of our ethos.

As part of the long-term strategic growth of the UK company we are seeking highly motivated, enthusiastic individuals to join our growing dynamic team. Although the posts are advertised as based in Fort William, consideration will be given to applicants out with area who meet the required criteria.

Technician (£28k - £30k per annum)

This role is based in our Fort William workshop – you will be required to repair and service equipment which is deployed by our customers in support of their operations. Such equipment includes underwater cameras, surface cameras, antennae, control cabinets and associated cabling. In time, you will be able to provide remote support to customers to diagnose faults and recommend on-site remedial actions. Whilst you will be workshop based initially, there will be the opportunity to progress and develop into a field service engineer role.

Experience of working in a workshop environment, servicing and repair of electrical/electronic devices will be of benefit. If you possess some understanding of IT networking and troubleshooting, this would also be advantageous. However, this is not essential as full training will be given.

Field Service Engineer (£35k to £40k per annum)

Are you an experienced engineer/technician within the Aquaculture industry? This role will primarily require travel to customer locations to service, maintain, install and commission our systems on customer sites. In addition to this, you will be required to repair and service ScaleAQ equipment at our workshop in Fort William.

A high level and understanding of mechanical/electrical disciplines is essential along with good IT skills.

In return we offer a competitive and comprehensive package that includes the following:

• All overtime hours paid at time and a half
• Overnight inconvenience allowance
• All travel time is paid when working away from the workshop
• Enhanced pension scheme
• Life assurance
• Private health care
• Private use of company vehicle
• Training & development opportunities
• Flexible working applications will be considered

Informal enquiries can be directed to Colin McMillan (Service Manager UK) on mobile number 07384 281762.

To apply for these vacancies, you must be eligible to work in the UK and hold a valid driving licence. If you would like to apply to join our increasingly diverse team, please email your covering letter and CV to gillian.dempster@scaleaq.com

Closing date for application is Friday 17th May 2024. (Please note that we reserve the right to amend the closing date depending on applications received).

Job Requiremenets

• Be in charge of plant operation activities, ensure that the biomass plant complies with all regulatory and safety requirements.
• To Supervise and oversee daily plant operations and maintenance performed by the Operations Team with shift order and maintenance in compliance with the groups’ safety and regulatory quality requirements.
• Optimize plant operation according to grid demand and equipment conditions
• Ensure power generation quantity, plant auxiliary load, fuel consumption and boiler feed water makeup rate within limit
• Approve work permit as per regulation and procedures
• Identify the equipment defect and report any abnormal conditions
• Assist the Operation Manger in preparation and control of the budget for the Operations and Maintenance Departments.
• Support the Operations and Maintenance teams to carry out continuous process improvements
• Manage all contractors on site for detect rectification and warranty claim to comply with requirement.
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures
• Planning of overhaul, inspection and troubleshooting of Distributed Control System, PLC and field instrument

Requirements

• Diploma or degree in Engineering or equivalent
• At least with a steam boiler engineer 2nd class certification
• Able to Multi-task, meticulous and a good team player
• Problem solving skills, ability to communicate with staff in different functions and contractors
• Able to work on 12-hour rotating shift
• At least 5 years of relevant experience working as plant operations Engineer
• Experience in Power Plant industry is an advantage
• Ability to work under pressure