Total 41 field engineer job vacancies in Art / Design / Entertainment category in Pasir Gudang

Responsibilities:

• Full responsible for Netlist-to-GDS physical design implementation of 12nm/6nm/4nm and below advanced process chips.
• Block owner, take block of 2~3 Million instances, working on Synthesis/APR(auto place and route)/Signoff
• Block coordinator role for more than 5~10 blocks, solving the critical issue and give the solution to block owners.
• TOP role for the complicated hierarchical chip (more than 20 Million instances plus 500+ macros), doing floorplan and partition, responsible for full chip tapeout

Requirements:

• Bachelor/Master Degree in Electrical/Computer Engineer.
• Experience in physical design with tape-outs.
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC2 or Innovus.
• Good in script programming with Perl, TCL/TK or other languages.

The position is an exciting opportunity to be part of a flexible and dynamic team in the growing markets of mixed signal chips with signal processing IPs, ARM processor and AMBA bus interface like Wireless Chargers, Bluetooth, PMIC etc. used in Mobile, Tablets, Microcontrollers etc. The role works within the digital design team with the aim to create an efficient Digital Design.

Responsibilities and Duties include but not limited to:

• Work at IP level design, but occasionally also at SOC design.
• Creation of RTL code
• Some opportunities to integrate the IP in the SOC
• UPF flow, Low power Flow, Power aware simulations
• CDC/RDC/LINT checks using various tools
• Verification of concept using Matlab/Simulink and toolboxes
• Synthesis, Scan insertion, ATPG.
• STA.
• Schedule preparation at IP level together with the Design leader and execution adhere to plan.
• Reporting to the management.
• Accountability.

Qualification Requirements:

• Masters in Electronics' Engineering (a relevant experience with minimum 2 years in a semiconductor or high technology R&D environment would be appreciated)
• Some Knowledge/Experience/Exposure as below would be appreciated:

1. ARM based Architectures, AMBA bus, Peripherals, Boot
2. RISC-V architectures
3. Hardware Design Language (such as VHDL or Verilog)
4. CDC, RDC, LINT
5. Synthesis, Scan Insertion, ATPG
6. Physical Design, including Power analysis, Clock tree Synthesis, Power Gating, Physical Checks
7. Power Aware, Low power and UPF methodology
8. Tools porting from Verilog RTL into C++
9. Scripting languages (PERL, TCL, PYTHON)
10. Knowledge in Static Timing Analysis

• Able to work in a multi-cultural team.
• Strong analytical and problem-solving skill.
• Able to keep up with fast moving new design methodology.
• Candidates with extensive experiences will be considered as Staff Engineers/Design Managers
• Salary package will be offered base on working experience

Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China, Singapore, South Korea, and Europe on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

Role and Responsibilities:

• Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Senior Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification

Requirements:

• Minimum BSEE with hands-on experience in IC Design flow.
• Familiarity with modern EDA tools such as Cadence, Mentor, Synopsys etc.
• Have working knowledge in analog building blocks such as bandgap reference, LDO, amplifiers, low noise amplifiers
• Understanding of ADC topologies eg Delta-Sigma, SAR, flash, integrating etc … advantageous
• A good team player with good communication skills
• Enthusiastic and independent worker.
• Willing to work in Tampines

• Support the Technical section in the Power and Renewables team for the development of Renewable Generation Projects
• Perform site assessments and evaluate engineering designs for ground mounted solar projects throughout the project lifecycle
• Follow up on the detail engineering phase with selected partners, ensuring compliance with Technical Specifications and relevant legal requirements of the Renewable Generation Projects
• Support the execution of Renewable Generation Projects with strict compliance of HSE, Environmental, Quality and Keppel relevant policies
• Supervise and oversee the on-site construction and commissioning processes to ensure the projects meet the design specifications
• Provide technical input for Operation & Maintenance activities (such as O&M manual, solar monitoring setup, etc.)
• Stay abreast of industry trends, new technologies, and best practices to improve project delivery continuously
• Ensure proper coordination between the Renewable Generation Projects and the rest of the Keppel stakeholders involved in the development of the Power Generation and Transmission Projects
• To undertake additional duties and responsibilities as deemed necessary

Requirement

• A Diploma in Electrical or Energy Engineering
• Strong technical knowledge of electrical engineering principles, including AC and DC systems
• Proficiency in industry-standard design tools, such as PVsyst, Helioscope, SolarGIS, and Homer Pro
• Proficiency in AutoCad
• Detailed knowledge and experience of modern Health, Safety and Environmental practices
• Good understanding, technical knowledge and experience in the Design and/or Construction of large-scale ground mounted Solar PV Power Project

Responsibilities :

• Responsible for the design and development of analog building blocks, including amplifiers, integrators, switched capacitor circuits, regulators, bandgap circuits, Delta-Sigma ADCs, SAR ADCs, filters and control logics etc.
• Responsible for top-level integration of high performance mixed signal chips including analog front end signal acquisition and conditioning chips and analog front end battery monitor chips etc.
• Work with digital team to define register maps, control logics, digital filters for analog front end chips or mixed signal SOCs etc.
• Conduct periodic design reviews.
• Support test development and product development teams in bringing projects to production.

Requirements:

• Degree/Master/PHD in Electrical Engineering or Microelectronics with excellent technical background in analog /Mixed-Signal design.
• With interest in IC design welcomed.
• With experience in analog IC design preferred.
• Salary will be offered base on working experience

· Position: Structural Engineer/Supervisor

· Location: Gul Road (company transport provided)

· Working Hours: Monday to Friday (8am - 5.30pm), Saturday (8am - 12pm)

· Salary (commensurate with experience): Up to $5,500 + OT Payable + GOOD Performance Bonus (3-6 Months)

· Duration: Permanent

· Industry: Oil and Gas

Main Responsibilities:

· Work out MTO for the respective Projects and hand over to the material coordinator for follow up with the procurement of materials

· Maintain and upkeep the remnant material records for final reconciliation of materials

· Liaise with Project Lead/Superintendent to get knowledge of the project schedules

· Expedite the site fabrication and installation works with the respective sub-contractor teams in achieving targeted progress

· Updating and reporting project progress reports and plan for one -week ahead of activities to be completed

· Consolidate and update information to PR coordinator for items like galvanizing, machining etc apart from project materials for raising Purchase Requests, Variation Orders for client, Site Instructions for sub-contractors

· Coordinate with QA/QC in resolving issues and maintaining project quality standards

· Coordinate with Client representatives for resolving issues and maintaining project quality standards

· Red Line Markup drawings to be done progressively and update engineering regarding the site changes

· Liaise with Project Lead/Superintendent for drawing and site discrepancies, equipment structural clash checks for trouble shooting of fabrication matters and get information for site coordination

· Coordinate and organize scaffolding erection and de-staging activities with trades

· To carry out any other assignments

Requirements:

· Degree/Diploma in Engineering/Marine Offshore or equivalent

· Minimum 5 years' experience in marine/shipyard operations involving structure fabrication and installation

· Topside Module / heavy steel fabrication and assembly experiece

· Ability to communicate effectively, coordinate site activities between different trades to achieve structural completion as per planned construction sequence

· Computer literacy – MS Excel for reporting

Email to: abby.pang@searchpersonnel.com.sgfor more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Summary of role: You will be involved in the designing of electrical system that meets the project requirements, safety, and functionality.

Responsibilities:

· Design and draft of Electrical Single Line / Panel Diagram according to customer technical specification;

· Maintain, update and correct drawings as needed, and ensure its accuracy and completeness;

· Collaborate with project teams to facilitate drawing preparation;

· Respond promptly to inquiries and request relating to the drawings.

Requirements:

· Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University;

· Knowledge in Autocad and Eplan is an advantaged;

· Possession of team spirit, good communication and organising skills;

· A good team player with strong collaboration and stakeholders’ management skills;

· Excellent organizing skills, spoken and written communication skills.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are looking to hire Robot Designer Engineers to join our Robotics Team. This is a position for a research-focused role towards designing, building, and prototyping ground wheeled robots. Our roadmap of planned robots includes small robots (200W x 150D x 200H mm) and large robots (1800W x 1200D x 1800H mm). These robots’ purpose is to showcase our work on cutting edge algorithmic capabilities for robots and new design paradigms for robots. Your work will involve the creation of robots from scratch and enclosures that sit atop existing off-the-shelf robot chassis platform.

This is a difficult job role that will require a mix of design, mechanical engineering, and electrical engineering expertise. While we do not demand for you to possess the entire skillset, you must be willing to acquire the missing skillsets over the course of your employment and commit to becoming a multi-disciplinary engineering staff.

MyrLabs’ intends to create robots that defy existing design norms. We are looking for people who are creative and have the passion to create sophisticated mechanical objects.

Responsibilities

1. Work with the Senior Management Team to conceptualize robots that align with the Company’s roadmap and plans

2. Developing new ideas for robots and presenting them to the Senior Management Team

3. Sketch, CAD, and then realise/produce the concept robots

4. Work with other R&D staff to integrate sensors, computers, and other hardware on the robots

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

Critical Skills

- Demonstratable expertise in using SOLIDWORKS, Fusion 360, NX, or equivalent professional CAD software

- Demonstratable ability to draw, sketch, create, and present conceptual drawings

- Demonstratable expertise in product design, problem solving, and/or creative thinking

Nice to Haves

- Demonstratable expertise in mechanical engineering, electrical engineering, and/or programming

- Demonstratable ability to conduct focus groups and extract requirements

- Demonstratable knowledge of manufacturing standards and practices

- Demonstratable experience in identifying design, production, material and technology market shifts

After application, please send your resume, MBTI profile, and portfolio of previous work or ideas to careers@myrlabs.com

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

· Position: Piping Engineer/Supervisor

· Location: Gul Road (company transport provided)

· Working Hours: Monday to Friday (8am - 5.30pm), Saturday (8am - 12pm)

· Salary (commensurate with experience): Up to $5,500 + OT Payable + GOOD Performance Bonus (3 - 6 months)

· Duration: Permanent

· Industry: Oil and Gas

Main Responsibilities:

· Supervise fabrication and installation of piping items as per drawings and clients specifications

· Follow planned progress schedule without compromising quality and safety

· Coordinates with QC, Painting Supervisors and clients’ representative for hydro-testing and completion

· Responsible for safety in workplace & workers/contractors under your care.

· Attend daily Toolbox meeting at site.

· Carry out daily reporting and monitoring site progress in order to achieve planned schedule.

· Ensure site housekeeping are well maintained and strictly follows proper work sequence and workflow

· Prepare necessary documents such as JCS, SI as and when required for all additional work requirements

· Responsible for Material Take Off (MTO) and follow up

Requirements:

· Diploma in Mechanical Engineering or equivalent

· Minimum 3 years of experience in marine/shipyard operations involving site piping fabrication and supervision works

· Good planning, organization, control, problem solving, interpersonal and communication skills

· Proficient in MS Office applications (ie. Microsoft Excel)

Email to: abby.pang@searchpersonnel.com.sgfor more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

• Position :Electrical or Application Engineer- BMS/HVAC/ACMV | Up to $5000 + VB
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Boon Lay Way-2 stops away from Jurong East MRT
• Salary (commensurate with experience) : Up to $5000 + AWS + Minimum 2-5 months Variable Bonus + 16 days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities

• To provide engineering support to the Project team from validation phase to project implementation
• To identify type of material and equipment requirement during validation phase.
• To involve in preparation and submission of engineering submittals.
• Programming of devices & creating and programming graphics in accordance with the project requirement.
• To assist in Test and Commissioning of system equipment.
• To assist in preparation and submission of operation and Maintenance Manuals.
• To provide Bill of Quantity for the projects.
• Any other duties as assigned by superior
• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field
• Min 1-2 years of relevant work experience
• Experience in PLC programming is added advantage
• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus
• Knowledge of IT networking and database programming, Function Block programming,
• Structured Language Programming or HTML5 programming will be of added advantage
• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications
• Position: Data Analyst (Server)
• Location: Jurong West
• Working hours: 5 days, Monday to Friday (8.30am to 6.00pm)
• Salary (commensurate on experience): Up to $2700 + AWS + Variable Bonus + OT
• Duration: Contract (3-4 months extendable)
• Industry: Logistics - MNC

Responsibilities

• Perform waste walk and time studies in the data server operations and ensure the accuracy of data as assigned.
• Updating the collected data in the standard formats in excel/gsheet.
• Prepare weekly/bi-weekly summary reports using collected raw data, identified problems and caused, and improvement recommendations
• Any other ongoing tasks related to the current projects
• Ability to stay inside data center floors for prolonged periods (2 hours approx.) each time under some level of machine noise

Requirements

• Studies complete or ongoing in Diploma/ Degree in Industrial Engineering, Business Administration or Logistics
• Proficient in Microsoft Office – Excel, Word, PowerPoint
• Strong analytical skills, coordination and reporting skills
• Good communication skills to work with different levels of personnel
• Basic understanding on production processes and information flow would be added advantage.

Email to joie@searchpersonnel.com.sg

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684Position: Data Analyst (Server)

• Location: Jurong West
• Working hours: 5 days, Monday to Friday (8.30am to 6.00pm)
• Salary (commensurate on experience): Up to $2700 + AWS + Variable Bonus + OT
• Duration: Contract (3-4 months extendable)
• Industry: Logistics - MNC

Responsibilities

• Perform waste walk and time studies in the data server operations and ensure the accuracy of data as assigned.
• Updating the collected data in the standard formats in excel/gsheet.
• Prepare weekly/bi-weekly summary reports using collected raw data, identified problems and caused, and improvement recommendations
• Any other ongoing tasks related to the current projects
• Ability to stay inside data center floors for prolonged periods (2 hours approx.) each time under some level of machine noise

Requirements

• Studies complete or ongoing in Diploma/ Degree in Industrial Engineering, Business Administration or Logistics
• Proficient in Microsoft Office – Excel, Word, PowerPoint
• Strong analytical skills, coordination and reporting skills
• Good communication skills to work with different levels of personnel
• Basic understanding on production processes and information flow would be added advantage.

Email to joie@searchpersonnel.com.sg

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

The candidate will join a team of AI scientists, apprentices, data and software engineers/apprentices. With the team, he or she will experiment and build AI solutions that can help Singapore companies improve their businesses using AI.

The Senior Engineer/Tech Lead will be expected to provide technical leadership, drive collaboration with cross-functional teams within AI Products to design and resolve complex issues, engage stakeholders, manage, mentor and guide junior engineers in the projects.

Duties and Responsibilities

• Architect and develop scalable and reliable software and system applications/frameworks using engineering best practices and AI technologies
• Drive and maintain engineering, coding and DevOps/MLOps/CICD best practices, and documentation standards
• Work closely with Product Manager(s) to engage stakeholders, scope and drive product deliverables through Agile methodologies
• Utilise problem-solving skills to address and resolve user issues, with a focus on empathy
• Drive collaboration with cross-functional teams within AI Products to design and resolve complex issues
• Keep abreast of, and be able to evaluate application of technologies and trends in software development best practices and architectures (in software / AI)
• Manage, mentor and guide a team of engineers in the projects
• Contribute to community engagement activities such as sharing via technical session meet-ups and article write-ups, and participating in discussion forums

Qualifications

1. Degree in computer science, machine learning, AI, and other related fields
2. Experience in applying software design patterns to build scalable and reliable software systems
3. Experience in developing, deploying and maintaining production systems/APIs on cloud platforms such as AWS, Google Cloud, or Microsoft Azure
4. Experience in AI/Machine learning frameworks such as Tensorflow and Pytorch
5. Experience in driving software development using Agile methodologies
6. Experience with leading other engineers in a software development project
7. Experience with applying best practices to source code repository management
8. Previous working experience in Large Language Models will be advantageous
9. Previous experience in contributing to open-source projects will be advantageous
10. Data story-telling, information visualisation/UX and technical writing skills

Responsibilities

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP
  Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Requirement

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 2 years of high-speed CPU/GPU/DSP Subsystem RTL Integration experience or IP/Block/SoC Design experience (Candidate with less than 5 years of relevant experience will be considered for junior position)
• Experience with Synopsys ICC (preferred) or Cadence tools from netlists to GDS
• Experience in graphics processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Knowledge of high-speed/low power IP and custom circuit design
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills