Total 105 electronic engineer job vacancies in Maintenance / Repair category in D22 Jurong, Jurong Island, Tuas

Job Responsibilities

1. Perform instrument Engineering design for Onshore and/or Offshore Oil and Gas facilities.

2. Responsible for E3D (Aveva PDMS/SP3D) instrument set up and modelling of offshore instrument equipment/ladders, meter, etc.

3. Prepare specifications and datasheets in accordance with project requirements to ensure technical and regulatory compliances are met.

4. Take part in inter-discipline coordination work between engineers from other disciplines to ensure quality and interfacing of electrical part in larger package supplies

5. Ensure that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements.

6. Work independently and also together with a team of specialized instrument Engineers/Designers for the complete detail design

Job Requirements

1. Bachelor Degree in instrument Engineering

2. Minimum 3 years of relevant experience with instrument design involving Onshore and/or Offshore Electrical power and distribution system

3. Familiarity with global instrument codes, standards and regulations i.e. IEC/BSI, etc

4. Knowledge of instrument system for assessment/compliance studies and reports

5. Willing to travel regionally (i.e SEA, China, etc.) when required

Job Requiremenets

• Be in charge of plant operation activities, ensure that the biomass plant complies with all regulatory and safety requirements.
• To Supervise and oversee daily plant operations and maintenance performed by the Operations Team with shift order and maintenance in compliance with the groups’ safety and regulatory quality requirements.
• Optimize plant operation according to grid demand and equipment conditions
• Ensure power generation quantity, plant auxiliary load, fuel consumption and boiler feed water makeup rate within limit
• Approve work permit as per regulation and procedures
• Identify the equipment defect and report any abnormal conditions
• Assist the Operation Manger in preparation and control of the budget for the Operations and Maintenance Departments.
• Support the Operations and Maintenance teams to carry out continuous process improvements
• Manage all contractors on site for detect rectification and warranty claim to comply with requirement.
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures
• Planning of overhaul, inspection and troubleshooting of Distributed Control System, PLC and field instrument

Requirements

• Diploma or degree in Engineering or equivalent
• At least with a steam boiler engineer 2nd class certification
• Able to Multi-task, meticulous and a good team player
• Problem solving skills, ability to communicate with staff in different functions and contractors
• Able to work on 12-hour rotating shift
• At least 5 years of relevant experience working as plant operations Engineer
• Experience in Power Plant industry is an advantage
• Ability to work under pressure

Responsibilities:

To maintence the facilities and machines such as the paper press machines and iron bar press machines

To maintence the electronic, and make sure it working

To keep the working site in clean and safe

To supervise maintenance technician to ensure daily tasks are carried out as planned

Carry out facilities operations and maintenance work.

Requirements:

At least 3 year’s relevant experience

Having relevant educational certificate is an advantage

Good attitude and self motivated is required

Can adapt the alternate shift

Responsibilities:

To maintence the facilities and machines such as the paper press machines and iron bar press machines

To maintence the electronic, and make sure it working

To keep the working site in clean and safe

To supervise maintenance technician to ensure daily tasks are carried out as planned

Carry out facilities operations and maintenance work.

Requirements:

At least 3 year’s relevant experience

Having relevant educational certificate is an advantage

Good attitude and self motivated is required

Can adapt the alternate shift

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Experience in Plant Fire System and knowledge in Electrical System such as MV Switch gear, LV MCC, UPS, Soft Starter, VSD.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Electrical Engineering
• Minimum 3 years’ experience in a Power Plant or Utilities plant environment

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Selected candidate will be engaged under a third-party agency payroll for the tenure of employment in SRC under 1-year renewable contract

Key Responsibilities:

• Develop design philosophies and design deliverables associated with the operating of equipment & facilities for the project scope.
• Supervise a group of engineers or functions as a technical specialist, formulating and developing advanced concepts, techniques, and standards. Responsibilities include assuring effective utilization of engineering personnel, and technical quality.
• Handle Instrument and Control matters by interfacing with project management team, refinery maintenance teams, vendors and contractors
• Evaluate the optimum control system to be integrated with the existing refinery system.
• Coordinate with other technical experts for the preparation of Project Standards.
• Ensure Project Requirement Specification meet local and international codes and standards and Project Standards.
• Coordinate work with other engineering disciplines such as process engineering, electrical engineering etc.

Requirements:

• Minimum Bachelor Degree in Instrument & Control Engineering or relevant disciplines
• Minimum 20 years’ experience, with project design experience especially for onshore petrochemical / refining facilities for Major Capital Projects
• In depth knowledge of design requirements for onshore petrochemical project and brownfield assessment
• Familiarity with design requirements on modules will be an advantage
• Demonstrated ability to lead and coordinate design activities
• Good working knowledge on FEED and Detail Design requirements
• Good coordination, technical writing and communication skill.

POSITION OVERVIEW

Pacific Refreshments Pte Ltd (The Coca-Cola Company) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

KEY DUTIES

The objective of this role is :

• Supervise and /or execute all tasks related to maintaining, calibrating, repairing and inspecting building utilities.
• Oversee all assignments related to remodelling, renovation, and maintenance of the facility.
• Supervise maintenance work for workplace safety and health compliance.
• Oversee the safe operation of the boilers and associated equipment.

KEY RESPONSIBILITIES

• Coordinates and provides instructions to external vendors engaged in preventive / corrective programs executed in the building utilities.
• Supervise daily routine facility jobs and repair work orders as assigned.
• Obtain and finalize permits needed for vendors to carry out their work.
• Troubleshoot equipment breakdown and carry out basic repairs.
• Maintain all facilities equipment in optimum condition. Ensure all documentation related to maintenance activities are completed accurately and processed to full completion.
• Lead in Root Cause Analysis for equipment/facility breakdowns.
• Leads and develop Improvement projects. Continuously seek opportunities to improve utility equipment effectiveness and efficiency.
• Support Integrated Management Systems development and continuous improvement. Review maintenance records to ensure adherence to applicable standards such as (e.g. ISO 9000, ISO 14,000, OHSAS 18,000 ,ISO 22000 and KORE
• Manage Plant Engineering tools, equipment, accessories and utility spare part Stores.
• Execute basic preventative maintenance on the steam boiler unit and automated warehouse equipment, conducts routine rounds on Utilities.
• Upkeep the building GMP and ensure maintain the standard.
• Implement the energy reduction programs to reduce the cost on utilities.

QUALIFICATIONS & RELATED EXPERIENCE

• Knowledge of safety procedures applicable to working with high and low voltage electrical systems with electrical theory and its application.
• Knowledge of maintenance and repair procedures for various mechanical systems including HVAC System, Fire Protection System, plumbing, heating, drainage, building and others
• Knowledge of the engineering principles and practices of the facilities engineering service.
• Basic knowledge of the standards, codes, and regulations pertaining to the construction, and maintenance of structures and facilities.
• Knowledge of electrical and electronic system commonly found in public facilities, such as indoor and outdoor lighting systems and timing devices.
• Skill in planning, designing, organizing, and executing electrical & Mechanical upgrade projects mandated by changing codes, regulations and safety requirements.
• Preferable at least 3 years’ experience. Food Industry / manufacturing company / Boiler experience would be advantageous.
• Knowledge in SAP / Microsoft Office / Power BI and other software related to Data Analytics
• Knowledge in SCADA & BMS
• Good communication skills
• Diploma in Electrical / Mechatronics / Mechanical Engineering
• Willing and able to support public holiday and weekend call-out if needed

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Experience in Plant Fire System and knowledge in Electrical System such as MV Switch gear, LV MCC, UPS, Soft Starter, VSD.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Electrical Engineering
• Minimum 3 years’ experience in a Power Plant or Utilities plant environment

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Job Descriptions:

• Lead the Mechanical team to ensure that industrial machinery and equipment runs smoothly and reliably.
• Lead on improvements Projects and ensure oversee on task execution to completion.
• Creating maintenance procedures and Work Instruction.
• Managing stocks of supplies and equipment.
• Keeping records and pull data of faults and repairs history from SAP and prepare analyzation report for reliability action.
• Any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Strong mechanical background and basic electrical knowledge.
• Have at least 5 working years’ experience in a process plant with maintenance experience.
• Minimum diploma in mechanical.
• Autonomous, good communication skills, team player, high organizational skills and analytical.
• Proficient in Ms Office

Principal Responsibilities

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.).
• Provide maintenance and engineering support for field instrumentation and coordinate with control systems engineer to achieve business and operational objectives.
• To provide instrumentation expertise to sub-project teams so that all requirements related to instruments is known and implemented in a professional, compliant and efficient way
• Responsible for the maintenance and engineering of instrumentation in the plant.
• Responsible for providing cost and schedule estimates related to execution of the works assigned.
• Responsible for supporting the control Engineer for trouble shooting the plant issues.
• Responsible for supporting the EMOC process.
• Work with the Project Team to develop instruments requirements of all projects and modifications; supervise and implement the works according to the schedule and requirements.
• Must be familiar with test equipment like Multimeter, Loop calibrator, Pressure calibrator etc.,
• Able to troubleshoot the instrument loop problems.

Required Qualifications/Experience

• Degree in Electronics/Electrical Engineering, major in Control and Instrumentation is preferred.
• Minimum 7 years relevant experience working with various field instruments.
• Experience with Honeywell DCS, Siemens PCS7 and Triconex PLC will be an added advantage.
• 3-5 years working experience in the refinery or petrochemical industry environment.
• Experience in plant commissioning, plant revamps / projects, in TAR planning & execution.
• Good background in Safety Instrumented systems with knowledge of hazards involved in operation and maintenance of instrumentation in the ASU/Hydrogen plants.
• Familiarity with P&ID Diagrams, Loop Diagrams, Electrical Single Line Diagrams, Protection relays with knowledge of electrical distribution systems.
• Basic Knowledge about different types of control valves/Field transmitters, Multimeter, Loop Calibrator, Pressure Calibrator.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledgeable in field instrument and control valve, practical experience is added advantage.

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Responsibilities:

• Responsible for the development of ILS deliverables of the ship maintenance programme that meets the customer's requirements effectively and on time.
• To support the department in designing and implementation of the ILS plan for delivering technical documentation, training and ILS data to customer.
• To support the department in designing and implementation of the ILS plan for determination of Spares and subsequent purchase and logistics arrangements for delivery to customers on time.

Requirements:

• Diploma/Degree in Marine or Mechanical Engineering related
• Prior knowledge of Mindef ILS (Integrated Logistics Support) methodology will be an advantage
• Knowledge and Work experience in maintenance management program for marine vessels is desirable
• Knowledge of maintenance planning software and methodology is desirable
• Comfortable with technical documentation work
• High proficiency in MS Office Suite
• Good written, verbal communication skills in English is required
• Must possess the ability to go on board vessels occassionally when required
• Occassional lifting and carrying of physical documents or parts is required

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Reviews Client's technical documentation and requirements.
• Defines engineering requirements.
• Prepares the technical documentation for instrumentation and systems requisitions and performs the technical evaluations.
• Provides technical support to Project group.
• Optimizes instrument systems ensuring minimal cost and simplification in compliance with the required performance.
• Prepares specifications for instruments, systems (DCS, ESD, F&G) and installation.
• Prepares functional analysis (control, ESD, F&G).
• Implements instrument detail design on P&ID's.
• Prepares instrument data sheets and loop diagrams.
• instrument hook-up diagrams.
• Implements detail engineering activities (layouts, routings, supports...).
• Performs the F.A.T. & T & C
• Design, develop and implement PLC & SCADA systems.
• Other ad hoc duties as assigned by the Management.

Requirements:

• Bachelor’s Degree in Instrumentation and Controls engineering discipline or equivalent
• 5 years of experience in energy business related engineering management and project management (engineering and construction)
• Experience in power and water utilities as well as renewable energy projects is preferred
• Good knowledge of local services and solutions specializing in treatment of water and wastewater.

Job Description:

- Perform repair, maintenance, overhaul, service, replace, remove and installation task (Technical & Mechanical)

- Perform lubricant replacing, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, tracking and diagnostic (Electrical)

Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine etc. special technical equipment.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

- Weekly updating of Vehicle Status in term of readiness and outstanding issue

- Ensure and Update operation Availability of vehicles are upheld and maintain above require

- Conducting of+C668 toolbox, safety and visitor briefings or presentation.

- Handling and coordinating with internal department request and customers’ needs

- Inspect and prepare quotation for Authority approval

- Arrange technician for daily drawing and returning of vehicle keys and logbooks

- Support Warranty issues if require

- Manage vehicle statuses/ flow, spare indentment status/ provisioning and resource planning

Job Requirements:

- Degree in Engineering (Mechanical/ Electrical/ Hydraulic/ Automotive/ Electrical & electronics/ Mechatronics) or Diploma in above engineering and has 5 years working experience of relevant industrial

- Good team player