JOB SUMMARY

Assistant Process Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Assist and support Manufacturing Engineer on daily production activities as below.

· Create Assemble processes and train Operators.

· Able to perform Assembly process for High Level Assembly (HLA). Understanding on assembly drawing and procedure.

· Perform PM, also keeping track on Engineering Tools, Fixture records.

· Assist Manufacturing Engineers in NPI run, product quality issue and provide the finding and RCCA (Root Cause & Corrective Action).

· Assist Manufacturing Engineers in product evaluation and necessary data collection.

· There will be a strong linkage with the Quality Assurance department in supporting the Regulatory and Compliance requirements of an ISO13485 organization.

· Assist in coordination of line re-configurations and machine/workstation move activities, including equipment arrival, installation, and process related setup.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply with all procedures within the company security policy.

REQUIREMENTS:

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Mechatronic/Mechanical) or equivalent. At least 2 year(s) of working experience in the related field is required for this position.

· Knowledge in medical product will be added advantage.

· Able to implement continuous improvements and cost reduction programs.

· Good communication skills.

· PFMEA, process flow.

· Tooling and fixture management

JOB SUMMARY

Assistant Process Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Assist and support Manufacturing Engineer on daily production activities as below.

· Create Assemble processes and train Operators.

· Able to perform Assembly process for High Level Assembly (HLA). Understanding on assembly drawing and procedure.

· Perform PM, also keeping track on Engineering Tools, Fixture records.

· Assist Manufacturing Engineers in NPI run, product quality issue and provide the finding and RCCA (Root Cause & Corrective Action).

· Assist Manufacturing Engineers in product evaluation and necessary data collection.

· There will be a strong linkage with the Quality Assurance department in supporting the Regulatory and Compliance requirements of an ISO13485 organization.

· Assist in coordination of line re-configurations and machine/workstation move activities, including equipment arrival, installation, and process related setup.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply with all procedures within the company security policy.

REQUIREMENTS:

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Mechatronic/Mechanical) or equivalent. At least 2 year(s) of working experience in the related field is required for this position.

· Knowledge in medical product will be added advantage.

· Able to implement continuous improvements and cost reduction programs.

· Good communication skills.

· PFMEA, process flow.

· Tooling and fixture management

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for a Research Assistant (Radiology Technician) position, in the Department of Medicine with an affiliation to the Healthy Longevity Translational Research Program, Yong Loo Lin School of Medicine.

The Maier lab concentrates on geroscience research with national and international partners translating healthy longevity research into practice to improve health and healthspan.

We are seeking a full-time Research Assistant (Radiology Technician) to join our team to perform clinical assessments and clinical trial administration. Experience in clinical research is ideal but not required.

Duties and Responsibilities

1. Primary responsibility of the research assistant (radiology technician, primarily focusing on dual x-ray absorptiometry) would bepreparing and educating clinical trial participants about the imaging procedure
   reviewing participants' IDs and study requirements, and maintaining participants' records during and after procedures
   perform the imaging procedure
   calibrating the equipment to ensure clear, usable images are taken of the correct area, as specified by the study protocol
   ensuring the proper sterilization and storage of the equipment, maintaining radiographic equipment, and reporting any equipment failures
   maintaining up to date knowledge of current radiology practices
   
2. When imaging is not required, research assistant will be involved in clinical research , according to Standard Operating Procedures (SOPs) in ongoing clinical studies, including:Administrating clinical assessments such as but not limited to muscular, cardiovascular and pulmonary tests
   Administering surveys, questionnaires
   Administering cognitive assessments
   

Duties and Responsibilities

1. Maintain clinical trial documentation, including SOPs, data records, equipment maintenance.
2. Assess and validate new assessment methods, particularly imaging techniques before implementing into clinical research.
3. Recruit and schedule participants for study visits.
4. Comply with clinical inventory management procedures.
5. Comply with good clinical practice.

Qualifications

1. A bachelor's degree in radiography or radiologic technology, possess license and certification to practice, training in bone densitometry using dual x-ray absorptiometry is required
2. The ability to operate and understand radiographic technology and equipment
3. Excellent communication skills with participants, staff and collaborators
4. Experience in routine clinical assessments in research studies is advantageous
5. Able to work independently and as a team member
6. Good interpersonal skills with strong leadership attributes
7. Must be meticulous and have good organization skills

Formal application

Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of 3 referees).

Duties and Responsibilities:

• Recruitment and work passes matter.
• Conducts orientation programmes for new recruits and ensures proper induction is given.
• Work closely with site Managers, Supervisors and management team to deliver HR initiatives and operational support.
• Assist in maintaining the document management system in accordance to the company’s ISO policies and procedures.
• Process of Group Insurance administration for staff and ensure compliance with the Act.
• Assist in organising corporate social responsibility and welfare activities.
• Other ad-hoc administrative duties when assigned.

Requirements:

• 'O' Level/ NITEC/ Certificate in a HR-related discipline with at least 1 year of relevant experience, preferably from a fast-paced work environment
• Good team player
• Able to work independently
• Meticulous, careful and positive
• Resourceful and enjoy challenges

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description :

• Perform Lab Testing on Marine Fuel Oil / Lubricant Oil
• Any other duties assigned.

Requirements:

· ITE / Polytechnic graduate from Chemical Process Technology (Industrial Chemistry) preferred.

· Minimum 2 year working experience in a laboratory (preferably in a petroleum testing laboratory)

· Be able to work well as a team and also work independently when required.

· Have good initiative, enthusiasm and willingness to learn.

· Good analytical skills.

· Careful in handling sensitive equipment.

· Competent in MS Office products.

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science ‘Proteins4Singapore’ program is funded by Singapore’s National Research Foundation (NRF). The Technical University Munich (TUM) and Nanyang Technological University (NTU) join forces with the Singapore Institute of Technology (SIT) and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI) to research plant-based proteins.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Project Title:

Scalable Process Development for Protein Extraction from Highly Concentrated Microalgae Broths

• Abstract:

The project Proteins4Singapore aims to address Singapore's aspiration to identify domestically grown protein-rich raw materials for the production of novel foods. Proteins4Singapore microalgae which can be grown in highly urbanized environments.

In this master’s/intern project, we will focus on processing microalgae to extract fractions high in protein from concentrated biomass slurries. To facilitate industrial-scale implementation, considerations for scalability and cost-effectiveness are paramount. The initial phase involves establishing a mechanical processing method for microalgae.

Further, microalgae cultures will undergo cross-flow filtration and continuous centrifugation for dewatering. To assess the impact of viscosity on the process, viscosity, and flow index values will be determined. For disruption, high-pressure homogenization will be used on differently concentrated microalgae solutions. The goal is to determine the maximum solid load of microalgae and assess disruption efficiency with increased solid loads.

Following the disruption, debris will be separated from soluble proteins through centrifugation and cross-flow filtration. Subsequently, these solutions will be separated from potential valuable co-products, while monitoring protein stability in highly concentrated solutions. Finally, cost efficiency and economic aspects will be evaluated.

• Applied Methods:

High-Pressure Homogenization, Micro- / Ultrafiltration, Protein Analytics, Rheometry, Centrifugation

Job Responsibilities:

1. Laboratory Work and Experimentation:

• Conduct hands-on experiments related to microalgae processing, protein extraction, and separation techniques.
• Collaborate with the research team to optimize protocols and methodologies.
• Assist in developing and refining scalable processes for protein extraction.
• Investigate factors affecting efficiency, yield, and cost-effectiveness.

2. Data Collection and Analysis:

• Analyze results using appropriate statistical tools and software.
• Summarize findings from scientific literature related to microalgae processing and protein extraction.
• Contribute insights from your research to project reports and your master’s thesis.

3. Collaboration and Communication:

• Present your research findings during team meetings.
• Actively participate in discussions with fellow researchers, and project leads.

Job Requirements/Competencies:

1. Educational Background:

• Currently enrolled in a Master’s program with a reputation university in fields such as Biotechnology, Bio-/Chemical Engineering, MINT (Mathematics, Informatics, Natural Sciences, Technology)
• Possess a Bachelor’s degree with a reputable university in relevant fields, including Applied Sciences, Food Science, Biotechnology, Chemistry or related areas

2. Experience and Attitude:

• Laboratory experience is beneficial for this position.
• A strong willingness to learn, contribute, and work independently is equally important.

3. Essential Skills:

• Attention to Detail: Precise data collection and adherence to protocols.
• Analytical Thinking: Ability to interpret experimental results and troubleshoot.
• Teamwork: Collaborate effectively within a multidisciplinary team.

This internship provides an opportunity to work on cutting-edge research at the intersection of biotechnology, sustainability, and food science. The successful candidate will gain practical experience in a dynamic and international research environment and contribute to Singapore’s protein innovation landscape.

We encourage curiosity, creativity, and a passion for scientific exploration.

Feel free to reach out if you have any further questions or need clarification!

What TUM CREATE offers you

• Intern allowance
• Medical insurance support
• Good amount of leave/vacation days
• Multicultural, vibrant, modern and positive working environment in Singapore
• Campus-sited office location with a host of facilities
• In-building perks including gym, game room and coffee room

Applications

Please send your application including cover letter and CV to hr@tum-create.edu.sg.

Only shortlisted candidates will be contacted.

We look forward to your application.

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB SUMMARY

Assistant Process Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Assist and support Manufacturing Engineer on daily production activities as below.

· Create Assemble processes and train Operators.

· Able to perform Assembly process for High Level Assembly (HLA). Understanding on assembly drawing and procedure.

· Perform PM, also keeping track on Engineering Tools, Fixture records.

· Assist Manufacturing Engineers in NPI run, product quality issue and provide the finding and RCCA (Root Cause & Corrective Action).

· Assist, Manufacturing Engineers in product evaluation and necessary data collection.

· Assist in coordination of line re-configurations and machine/workstation move activities, including equipment arrival, installation, and process related setup.

· Adhere to all safety and health rules and regulations associated with this position and as

· directed by supervisor.

· Comply with all procedures within the company security policy.

REQUIREMENTS:

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Mechatronic/Mechanical) or equivalent. At least 2 year(s) of working experience in the related field is required for this position.

· Able to implement continuous improvements and cost reduction programs.

· Good communication skills.

· PFMEA, process flow.

· Tooling and fixture management

· Process knowledge in Power box assembly would be advantageous.

Looking for Full-Time Veterinary Technician/Assistant to join our team!

Working hours: 10.30am to 8.30pm, except Sundays till 5.30pm.

4 Weekdays + 1 Weekend alternate with 3 weekdays + 2 weekends.

With prior experience working at a vet clinic or with animals preferred. However, candidates without experience are welcome to apply as training and guidance will be provided.

We are looking to hire for our Hougang and Punggol branch.

Job Description:

• Assist vets during consults, treatments and surgeries.
• Care for animals that are likely ill and/or disabled.
• Perform reception duties such as register patients, arrange appointments, dispense medications and respond to enquiries.
• Maintain overall hygiene and cleanliness of clinic (including animal cages, consulting rooms and surgery room).

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to hr@xtalents.com.sg

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026