Total 92 Research job vacancies in Engineering category in The United States of America

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

Ensure operational excellence and regulatory compliance in the centre.

Responsibilities:

• Provide operational support in the centre day-to-day and during center events
• Support the organization operations and research need through the workshops/laboratories, offices, building infrastructure and premise security management
• Conduct daily walkabout in the centre to ensure the centre is in good operational condition, uncompromised security and safety compliance
• Ensure a safe working environment within the centre
• Track, maintain and order the operational inventories and maintain a systematic filing system
• Work closely with in-house contractors for facilities feedback to keep the centre in a daily operational state
• Assist in liaising and sourcing of vendor for quotation, equipment, service and monitor the contractor work?s quality, schedule and ensure safety during the execution
• Handle requests and queries from staff and management
• Work together with internal stakeholders/partners to support the entity in center operations
• Assist in executing corporate facilities related projects
• Investigate, check and analyze reported on any workshop and laboratory breakdown
• Facilitate in the facilities related SOPs, Forms and presentation materials
• Perform essential handyman work when needed
• Assist in statutory audit and internal audit
• Any other duties assigned by supervisor

Job requirements

• At least diploma in related field (Facilities / Safety / Operations)
• Minimum 1 to 2 years of relevant experience in operations for workshop, laboratory, facility, building services, electrical and mechanical
• Willing to be scheduled to occasionally work off shift hours in support of operations
• Able to breakdown the assigned work into deliverable tasks and provide realistic timeline for their completion
• Competency in Microsoft Office, AV system. Experience in office outfitting/ relocation projects is added advantage.
• Experience in supervising contractors, facility management and their sub-contractors
• Some understanding in the HS&E requirement
• A self-driven and meticulous individual who has the strong ability to multi-task

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description:

We are looking for a highly motivated computational scientist with a deep understanding of chemistry/cheminformatics and structural biology to develop new AI models for ligand discovery. You will be working on a large collaborative project to build up A*STAR’s computational drug discovery capabilities. The candidate is expected to be familiar with the latest generative models. Familiarity with molecular docking programs is a plus.

Job Requirements:

• PhD degree in life sciences, chemistry, computational biology, or a related discipline
• Passion for science and research
• Highly motivated
• Proficiency in the use of machine learning frameworks (e.g. PyTorch, TensorFlow)
• Experienced in developing generative models
• Strong knowledge of chemistry/cheminformatics and structural biology
• Able to work independently and as part of a team
• Excellent written and oral communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Who are we?

We are the University of Cambridge presence in Singapore called Cambridge CARES, sponsored by the NRF CREATE program CAM.CREATE. CARES also hosts industry-funded and other agency-funded projects. Our team is comprised of world-class scientists and engineers working in a vibrant, fast-paced environment with great opportunities for knowledge and skills development.

CARES is a partner in the AMPLE project (An Accelerated Manufacturing Platform for Engineered Nanomaterials), aiming to build a state-of-the-art pilot facility for rapidly scaling-up nanomaterial production, building upon recent innovations at CARES in the areas of reactor design, machine learning and automation. This two-year project will begin in 2022 (Est April) and will lead to commercialization through CARES’ spinoff company - Accelerated Materials Ltd.

Who are we looking for?

We are seeking a highly skilled and experienced Chemical Process Technician to join our team. The ideal candidate will be responsible for monitoring and controlling chemical processes in a manufacturing environment to ensure safe and efficient operations. The Chemical Process Technician will also be responsible for maintaining accurate records and troubleshooting any issues that arise during the process. This will be a fixed-term contract that ends on 30 November 2024 with the possibility of extending to a longer-term position.

Key Responsibilities:

• Monitor and control chemical processes to ensure safe and efficient operations
• Maintain and troubleshoot equipment used in chemical processes, including pumps, valves, and tanks
• Maintain accurate records of all process-related data, including batch records and equipment logs
• Respond to alarms and other process-related issues on time
• Work with product team to ensure that products are manufactured to meet customer requirements
• Adhere to all safety procedures and guidelines

Qualifications:

• Specialist’s diploma or bachelor's degree in Chemical Engineering or related field preferred
• Familiarity with process control systems and software
• Knowledge of chemical safety procedures and guidelines
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Ability to work in a fast-paced environment and manage multiple tasks simultaneously

What can we offer you?

• A stimulating working environment with friendly, highly motivated colleagues.
• Opportunities to develop and implement new ideas in a creative environment.
• A competitive salary in line with your skills and experience.
• A comprehensive medical insurance coverage as part of your employment.

Please note this post is mainly based in the CREATE Tower at NUS University Town, Singapore.

How to apply?

Please apply by uploading your CV and academic transcript to https://talent.sage.hr/jobs/aca98562-8f29-47a1-85e6-64df336fdca2. If you have any questions, please feel free to reach out to the HR team at recruitment@cares.cam.ac.uk.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. S/he will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. S/he may also be called upon to advise other developers on integration standards.

Description

• Plan, design, implement and test integration between new and in-development digital health solutions and other healthcare information systems

Qualifications

• Bachelor's degree in Computer Science, Computer Engineering, M.I.S. or related field

• 2+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)

• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system

• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)

• Experience integrating with Singapore public hospital technical stack and working with IHIS are a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. S/he will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. S/he may also be called upon to advise other developers on integration standards.

Description

• Plan, design, implement and test integration between new and in-development digital health solutions and other healthcare information systems

Qualifications

• Bachelor's degree in Computer Science, Computer Engineering, M.I.S. or related field

• 2+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)

• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system

• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)

• Experience integrating with Singapore public hospital technical stack and working with IHIS are a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Diploma/Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Responsibilities:

• Pro-actively monitor, analyse, troubleshoot and resolve storage-related issues to ensure uninterrupted operation.
• Coordinate with other NSCC technical personnel to optimize storage performance and scalability.
• Periodically monitor and conduct storage performance test and analisys, utilization rate and capacity planning.
• Maintain data protection and disaster recovery strategies.
• Exploring new solution and best practices in HPC storage technologies.
• Assist in designing the next phase of NSCC’s infrastructure.

Qualifications:

• Degree in a Computational Science, Engineering, or a related field.
• Knowledgeable about parallel file systems and data management concepts.
• Experience with HPC parallel storage solutions such as Lustre, GPFS, or similar.
• Competency in a UNIX/Linux command line environment highly desirable.
• Minimum of 3 years in handling HPC storage related environments.

Responsibilities:

• Pro-actively monitor, analyse, troubleshoot and resolve storage-related issues to ensure uninterrupted operation.
• Coordinate with other NSCC technical personnel to optimize storage performance and scalability.
• Periodically monitor and conduct storage performance test and analisys, utilization rate and capacity planning.
• Maintain data protection and disaster recovery strategies.
• Exploring new solution and best practices in HPC storage technologies.
• Assist in designing the next phase of NSCC’s infrastructure.

Qualifications:

• Degree in a Computational Science, Engineering, or a related field.
• Knowledgeable about parallel file systems and data management concepts.
• Experience with HPC parallel storage solutions such as Lustre, GPFS, or similar.
• Competency in a UNIX/Linux command line environment highly desirable.
• Minimum of 3 years in handling HPC storage related environments.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Diploma/Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Job Summary:

We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will be responsible for designing and developing mechanical systems and components for DxD Hub. The role involves collaborating with cross-functional teams, utilising CAD software, conducting feasibility studies, verification testing and ensuring designs meet technical and regulatory requirements.

Roles and Responsibilities

· Conceptualise, design, and develop mechanical components and mechanisms for medical devices

· Prepare and maintain design documentation such as specifications, bill of materials, test protocols, test reports, etc.

· Perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.

· Conduct feasibility studies to assess the viability and performance of proposed designs.

· Work closely with cross-functional teams, including biological scientists, electrical engineers, software engineers, and project managers.

· Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA and ISO13485 etc.

Key Requirements

· Bachelor’s Degree in Mechanical Engineering, or related field. Master"s degree is a plus.

· Minimum 2 years of experience in mechanical design engineering.

· Proficient in CAD software, such as SolidWorks or AutoCAD.

· Strong understanding of engineering principles, materials, and manufacturing processes.

· Excellent problem-solving and analytical skills.

· Effective communication skills and ability to work collaboratively in a team.

· Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.

· Self-driven team player who is able to work in a fast-paced environment.