Total 10 Production job vacancies in Engineering category in The United States of America

General Job Description:

1) Attend all job descriptions requirements for the position of Turbomachinery Engineer;

2) Minimum 2 years experience operating with Oil and Gas industry;

3) Minimum 4 years experience working as Engineer;

4) Contribute to the Operations results achievement, by supporting all offshore units activities related to the Turbomachinery discipline from the technical assistance point of view, by performing and supervising the corrective/preventive maintenance activities and project execution that require onshore support (including proactive campaigns) or on site, developing solution designs and defining the work packs, by developing/monitoring/analyzing proper KPIs and meaningful statistics and by setting adequate actions to eliminate gaps, promoting continuous improvement.

5) Contribute to the vessels' POB Plan, by maintaining proximity with IA Planners and analyzing and validating the Maintenance Services Forecast, as well as monitoring the integrated maintenance plan.

6) Achieve the goals established for the business, by participating in the implementation of strategic and corporate projects and identifying improvement opportunities

7) Ensure integrity and Investigate failures and incidents on GTC, GTG and Steam turbines and other discipline related equipment, by embarking in the offshore units whenever necessary, performing root cause analysis, preparing work packs, technical reports, documentations, and maintenance procedures, with technical responsibility note

8) Must have availability to go to Singapore to visit the shipyard;

9) Experience with Offshore is preferred;

10) Experience with FPSO is preferred;

11) Required availability to move to Brazil and work offshore for the FPSO operation;

12) Fluent in English and Brazilian Portuguese speakers are mandatory.

13) Immediate availability preferred;

14) Knowledge on Brazilian legislation applicable to FPSO operation is required, including NR-10;

15) Availability to move to Brazil.

Skills:

- Operations and Maintenance

- Risk assessment

- FPSO

- Process Safety

- Regulatory requirements

- Maintenance and Repair

- Operational Risk Management

- Ensure compliance

Overall Job Purpose

With minimal guidance, to prepare sustainability deliverables, manage various scope of works defined by corporate or project team effectively and efficiently according to the specified technical requirements, timelines and budget; assist group lead or lead engineer in research and development task and resolve any arising issues during sustainability implementations.

Core Responsibilities

• With minimal guidance, collects the Lessons Learnt and Life Cycle value improvement ideas, sort out into different categories and coordinates with different disciplines to update/improve design standards.
• Assists lead engineer to propose, conducts and participates studies of new technology related to Company business, such as CO2 emission calculation and reduction, decarbonatization, Ammonia and so on.
• Assists lead engineer in strategy planning for new products of Modec business, i.e., offshore wind farm and so on.
• Assists specialists from Core Team (Technical expert group) to solve the critical issues arising from EPC projects or offshore fleets.
• Assists R&D lead of the assigned initiatives and monitor the progress for research topics from both Modec entities and external collaborators (universities, research institutes and consultants etc.).
• Assists lead engineer to implement the sustainability program as required by client specification or classification notation during project bidding / FEED and EPCI stage.
• Independently communicates with all stakeholders, i.e., consultant, classification body, clients, internal engineering disciplines, to arrange regular meetings, takes lead in certain topics in meetings, prepares minutes of meeting, and progress reporting as and when required.

Requirements

• Bachelor in civil/structural/mechanical/ship building/environmental engineering or above. Alternatively, Diploma in Engineering with relevant years of working experience.
• Minimum 3 years of relevant working experience in engineering in oil and gas sector or shipyard industries for bachelor’s degree holder, Minimum 1 year relevant experience for master’s degree holder, or fresh PhD degree holder. For diploma holders, minimum 8 years of relevant working experience.

Overall Job Purpose:

Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection, predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.

Core Responsibilities:

Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.

Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.

Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.

Contribute to the Operation Reliability and its performance (inspection, non-destructive tests), regarding the Inspection Plan and guidelines of the Static Structure Integrity coordination, by monitoring and analyzing inspection results, guaranteeing the traceability of information, performing proper root cause assessments, and providing technical review/recommendation. Furthermore, develop, if necessary, together with the responsible of equipment design, proposal of modifications to prevent or mitigate the deterioration processes.

Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.

Contribute to the compliance with the sector regulation (MPT, SPIE regulation/NR-13, etc.), by developing and executing inspections plans within the Static Structure Integrity coordination scope, focusing on Operational security needs, as well as monitoring KPI`s actions plans and elaborating SPIE reports.

Contribute to fleet performance improvement and safety by analyzing MOCs, TQs, NOIs, performing RCAs/FMEAs etc., and providing technical recommendations to support the Operation team.

Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.

Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas

Support MdB's BID/EPCI process by providing technical review and O&M cost review through bidding team and pre-ops team.

Participate in workshops with offshore inspectors and provide technical recommendations in order to ensure that their work is performed in compliance with contract specifications and legislation.

Sporadic embarkations on the vessels might be required for these activities.

Assist the organization in the external and internal audits by conducting the evaluation and approval of the

documentation requested by the legislation, providing the necessary clarifications regarding the integrity management system and the required evidence related to the controlled equipment. Moreover, record (information traceability) and analyze the audit results, defining or proposing actions to eliminate non- conformities.

Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.

Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.

Ensure that the information is addressed clearly and objectively so that everyone involved has a full understanding of this information. As well as establishing the integration between the departments involved in order to consolidate the quality of the information flow from the identification to the closing of the deviation and/or improvement.

Contribute to the definition if an equipment has or not condition to operate satisfactorily in order to ensure Operations reliability by participating in decisions or developing technical studies and informing to the involved ones the results of inspection reports, repairs or replacements recommended to restore the physical conditions in satisfactory levels.

Contribute to the hiring of 3rd parties to perform inspections on SPIE/NR13 Equipment and draw inspection isometrics by properly defining Scope of Work and participating in Kick-Off Meetings with potential suppliers.

Ensure the compliance with NR13 / MdB specifications in the fabrication of equipment by attending Hydrostatic Test at Manufacturer Workshop.

Ensure that all equipment is in condition to operate, complying with internal standards, NR13/SPIE specifications, by generating "punch items" lists as outputs of the initial inspections and following up the development of action plans on these lists.

Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.

Ensure that Integrity Inspectors' and PSV Mechanical Technicians' work is performed in compliance with contract specifications and legislation, as well as complying with NR13/SPIE standards and procedures, by planning and following up the distribution of activities of inspection plans and providing technical recommendations when necessary.

Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.

Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

HSSE Requirements and Code of Conduct:

HSSE: Act in compliance with the corporate HSSEQ Management System Policy, the MODEC Life Saving Rules, and the policies, guides, process standards and work instructions available in the Integrated Management System (IMS).

Act to promote the preservation of the environment, the health and occupational safety (personnel and their team), the safety of processes, and the preservation of assets in their scale of responsibility.

Ethics and Compliance: In compliance with the Code of Business Conduct and Ethics, as well as with MODEC Group

Ethics and Compliance Policies and Local Procedures, their respective forms, online and live mandatory trainings: is committed to comply with all applicable laws, regulations and obligations and act in accordance with the highest ethical standards and with MODEC values.

Emergency Plan: As per indication on the Training Matrix, Emergency Management Guide and Offshore EmergencyManagement, available in the Integrated Management System (IMS).

Relevant Experience and Qualifications :

Junior Engineer : 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Engineer : minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Senior Engineer : minimum 7 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is expected. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Engineer Specialist: minimum 10 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is expected. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Well written and spoken english with advance portuguese is required.

Intermediate Microsoft Office package knowledge is required. Basic CMMS systems knowledge is expected (SAP preferred). Basic Power BI knowledge is a competitive edge. Basic SGI knowledge is a competitive edge.

Overall Job Purpose

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Corrosion Assessment and Material Selection Studies for FSO/FPSO facilities (topsides/turret/marine) following Company Guidelines and Standards. The Lead Engineer may be also required to prepare such studies.

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Engineering deliverables associated with Materials and Corrosion discipline during FPSO / FSO projects FEEDs, Detailed Engineering and Execution phases effectively and efficiently according to the specified technical requirements, timelines, and budgets. The Lead Engineer may be also required to prepare such deliverables.

To interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss and assess lessons learned, root cause investigations, etc. for improvement of Corporate Standards and Philosophies.

Responsibilities:

• Fully understand MODEC standards, client and regulatory requirements and ensure its discipline engineers work and deliverables comply with the requirements.
• Support Senior Lead Engineer / Technical Authority participating in the review cycle and preparation of Corporate Standards related to Corrosion Assessment and Materials Selection, Sour Service, Welding, Surface Preparation and Coatings, Cathodic Protection, Piping and Valve Materials, etc.
• (Propose improvement for the Standards).
• Provide overall supervision, guidance and support to Material and Corrosion Engineers during FEED, Detailed Engineering and Execution phases.
• The Lead is expected supervise and/or perform work to ensure the work and deliverables are performed/ issued as per Company Standards and Guidelines, as per Project Technical Requirements, with required quality, within budget, and in line with Company Goal of maximizing value to Company and all stakeholders through the life of the facility (i.e. maximize life cycle profit and uptime).
• Provide Training and Couching to Material and Corrosion Engineers in the areas of corrosion assessment, material selection, coatings, metallurgy, cathodic protection, etc.
• Interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss lessons learned, root cause investigations, etc.
• Liaise with Operations Integrity Teams to participate in the improvement of Corrosion Monitoring and Chemical Injection Optimization Strategies.
• Represent Materials Group in key stakeholder (Client / Supplier / Sub-contractor / Class) meetings, reviews stakeholders’ documents / comments and addresses interface/implementation/execution issues and escalates where necessary to ensure that the project proceeds timely and smoothly.
• Participate in Manufacturer Qualification Programs in conjunction with Quality Group
• Participate in Research and Development Programs in areas of Corrosion and Corrosion Mitigation

Requirements:

• Materials & Corrosion Engineering degree at Bachelor or Master degree level.
• Minimum 12 years (with Bachelor) / 11years (with Master) relevant working experience as Materials /Corrosion Engineer in Oil and Gas Sector.
• Comprehensive experience in Offshore Oil and Gas Processing Facilities related to corrosion, corrosion mitigation strategies, corrosion monitoring, material selection, surface preparation and coatings, cathodic protection, metallurgy (welding, manufacturing), etc. and comprehensive knowledge of Industry Codes and Standards (NACE MR 0175 / ISO 15156, ISO 21457, ASME B31.3, NORSOK M001, NORSOK M501, etc.).
• Lead Engineer should be familiar with processing facilities and understand main process concepts involving Oil Separation and Stabilization, Produced Water Treatment, Gas Sweetening and Dehydration, Gas Compression, Seawater Treatment, etc.
• ECE (corrosion model) (preferred) or equivalent corrosion model

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics

Overall Job Purpose

To independently define concepts and critical deliverables, plan, manage, direct, control, approve and deliver engineering deliverables required in multiple projects effectively and efficiently according to specified technical requirements, timelines and budget, manage project resources and independently deal with and resolve all Process related technical issues of the project, and provide guidance to the assigned teams.

Core Responsibilities

• Understands the specific technical requirements of the assigned projects (may include Construction, Commissioning and Offshore assignment) and Industry Standard, Classification Society and Regulatory requirements.
• Plans and directs the running of application software such as process simulation and other in-house software programs for Safety valve sizing, control valve sizing and line sizing etc., exposure to dispersion and transient analysis software, reviews and approves the calculations / deliverables prepared by Engineers /Senior Engineers/Lead Engineers.
• Directs other Engineers in the team to develop engineering specifications (drawings, data sheets, etc) specific to the assigned projects, reviews them and validates with the Project Managers and client before incorporating them in the RFQs.
• Independently evaluates bids received for special process packages from suppliers, performs or directs others to perform a technical bid evaluation process, involves in cost estimation, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications and gives assessment to the Buyer who will follow up in the tender evaluation, price negotiation and award process.
• Approves drawings and documents from team members as well as 3rd party-generated study reports and ensures the timely provision of accurate documents and specifications to the vendor/sub-contractor to enable thee to execute their work and deliverables.
• Independently manages/develops/provides advice on solutions to technical/engineering and related issues by reviewing the issues/data and analysis and evaluating various options/measures using expert knowledge, seasoned experience and precedents and professional references where necessary.
• Reports any deviation from MODEC standard specification and practices, concept change to Department manager and seek his approval on the solution.
• Anticipates potential problems and takes preventive actions and independently handles variations in project execution. Develop unique solutions for complex technical problems that may include new design concept.
• Visits critical process suppliers, checks and tests process items to ensure that they function as per specifications. Where necessary, works with the concerned suppliers/contractors to rectify the issues and ensures that they comply with the specifications and are ready on time.
• Leads/participates in meetings, reviews progress of projects and addresses complex interface/implementation/execution issues to ensure that the project proceeds timely and smoothly.
• Independently evaluate the Process requirement for all packages in Marine & Topside, contributes to technical bid evaluation process, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications
• Reviews progress of projects and addresses complex interface/implementation/execution issues to ensure that the projects proceed timely and smoothly.Plans and organizes resources and schedule.
• Provides technical/engineering support and expert advice to Construction/Commissioning, Offshore work at site, directs trouble shooting and follow up actions to rectify the gaps or problems. Handles more complex issues, and where necessary, provides off-site support and advice.
• Independently prepares Facility startup procedures, finalizes with Operations team input and provides expert advice / guidance / trouble shooting for facility startup at Offshore
• Guides/supervises junior Engineers and provides feedback to Department Manager for their performance.

Requirements:

• Minimum 15 years of relevant working experience in Process engineering in oil and gas sector for degree holders or minimum 14 years of relevant working experience for Master degree holder. Direct work experience on FPSO/FSO projects, min 3 projects of mega size, and market practices in the oil and gas sector.
• Must be conversant with the applicable industry standards, Company standards, specifications and procedures for his/her functional area.
• Language(s) and Software: List any special language requirement besides English and also any fundamental software skill(s) required by this job.

1. MS Office
2. AVEVA Engineering
3. Process simulation (e.g., UNISIM Design, etc.)
4. Flare system hydraulics (e.g., UNISIM Flare, etc.)
5. Piping system transient analysis and hydraulics (e.g., Flowmaster, etc.)
6. Fire water system hydraulics (e.g., Pipenet, etc.)
7. Separation vessel performance (e.g., MySep, etc.)

The Role

· To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

· Develop Offshore Commissioning Procedures for Process Systems and supporting Mechanical Systems / Thermodynamic requirements for Combined Cycle systems.

· To support in developing project deliverables as per project & client requirement

· Prepare & Review of company development work methodology / procedures.

· Develop Facility performance test procedure in accordance with contract requirement.

· Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

· Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

· Carry forward the MODEC HSEQ policies / requirements to the team and meet overall HSEQ objectives in all projects / feedback results to corporate HSEQ team.

· Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly

· Perform duties as per directives of reporting authority.

· Leads site execution team on performing pre-commissioning and commissioning activities planned for the Process systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Process System Commissioning SoW.

· Commissioning of Process Systems, Functional tests and system certification with Class Society.

· Responsible for verification and close out of all Safety critical elements associated with the package.

· Ensure all regulatory and statutory testing and requirements are performed and records are maintained.

· Perform Risk assessment for the commissioning scope, conduct toolbox meetings

· Ensure to supervise Technicians to carry out commissioning activities in a safe and controlled manner in accordance with site procedures and PTW requirements

· Manage discipline and cohesive environment in the office. Monitor / Guide all commissioning engineers/assistants/administrators.

· Day to day Planning of work, Manage schedule & targets of the project as required.

· Identify and manage resource requirement to meet schedule and targets.

· Prepare and maintain commissioning records of site observations, testing processes and checklists

· Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed

· Troubleshoot the logic function, suggest modification plan of logic diagram, liaise with I&C engineer as well as ICSS vendor, and implement.

· Execute pre-commissioning and commissioning as per procedure and sign-off respective documents with Client representative for system closure.

· Prepare timely and accurate technical report for management and a reference for future.

· Travel to offshore project sites and perform offshore commissioning / assist facility startup.

· Lead the team to perform Start-up at offshore following the start-up procedure, stabilization and performance testing.

· Ability to set priorities and meet deadlines

Qualifications

· Bachelor Degree in Engineering (Process or Chemical) with 14 to 17 years work experience (or) Master Degree in Engineering (Process or Chemical) with 12 to 15 years work experience with minimum of 10 years work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 17 to 20 years work experience (making the equivalent to degree) can also be considered.

· Specialist knowledge of at least Three MODEC or related project line.

· Ability to define concepts of completion process.

· Experience of High Capacity Process Production Systems and EPCIC to handover to operations.

· Experience in Complex Gas Compression, Injection, Export Systems and Thermodynamic requirements for Heat Recovery and Steam systems.

· Have proven project experience and skills within the field of Testing, Pre-commissioning, Commissioning execution and startup at offshore

· Experience in offshore plant startup and stabilization and able to provide Operations with technical support throughout start-up, stabilization and performance testing

· Work experience within strict regulatory environments, and aligning commissioning independencies with engineering compliance and contractual requirements.

· High safety awareness is mandatory. A good knowledge of managing simultaneous operations (SIMOPS) is essential.

· Significant knowledge of multiple technologies, projects and applications. Working knowledge of competing and alternative technologies.

· Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

· Shows evidence of good Organizing / Management skills.

· Demonstrate ability to take lead.

· Good communication skill.

Commitment to take responsibility.

Ø Independently handle engineering design for required piping components; Pipes, Flanges, Fittings, Valves, Special Items (i.e. Strainers, Traps, Flame Arresters, Rupture Disc, etc.) required in project/plant in accordance with job specific requirements, in-house design standards, and applicable codes and standards such as ASME B31.1, ASME B31.3, ASME B16.34, API standards, NORSOK standards, British Standards, EN & ISO standards, MSS standards, NACE standards, ASTM standards with a certain skills of basic design development and detail design evaluation.

Ø Take the lead in the preparation of inquiry packages, in the technical clarification/evaluation of Vendor’s technical offers, and in the kick-off meeting/pre-inspection meeting with an inter-discipline collaboration.

Ø Prepare technical specifications including detail Piping Material Specifications, Design datasheets, detail design documentation & Inspection/Procedure documentation requests for required Piping Component Vendors as shown above.

Ø Provide assistance to create material database in SPMAT (Smart Plant Materials).

Ø Prepare technical bid evaluation, clarification with Vendors for technical confirmation for Piping Component Vendors as shown above.

Ø Selecting & recommending piping vendors from technical point of view to Procurement Team to issue purchase order.

Ø Check Vendor Documents, such as drawings, Test/Inspection procedures, Installation Procedures, Painting/Marking Procedures, for piping components such as indicated above.

Ø Review ITB (Instruction to Bidders), project specification, etc.

Ø Must have relevant working experience with a large Japanese Company.

JOB REQUIREMENTS:

Ø Bachelor’s Degree in Mechanical Engineering.

Ø Proficient in written and spoken English / Japanese.

Ø Min. 20 years of experiences as Lead Piping Material Engineer in Piping Engineering field in Offshore Projects on FPSO or fixed platforms. Total experience in Oil & Gas Onshore & Offshore is about 30 years.

Ø Have proven references of handling Piping Material Design Packages in at least 5 or more FPSO projects
.

Ø FPSO projects uses exotic materials like Duplex, Super Duplex, Titanium, Copper-Nickel, Glass Reinforced Epoxy (GRE), thorough knowledge of these materials.

Ø Have competitive engineering knowledges of Piping Material Design as shown above in FPSO or fixed platform.
ASME Design Codes: Boiler and Pressure Vessel Code (BPVC) Section VIII, Section IX, B31.1, B31.3, B31.4, B31.8.

Ø ASME Codes related to Piping Materials: e.g. B16.5, B16.47, B16.9, B16.20, B16.25, B16.34, B36.10M, B36.19M

Ø ASTM Code related to Piping Materials: e.g. A105, A106, A182, A216, A217, A234, A240, A312, A320, A333, A336, A358, A403, A420, A671, A672, A691, A694, A790, A815, A928.

Ø API Standards: e.g. API RP 14E, API 5L, API 6A, API 6D, API 594, API 598, API 600, API 602, API 608, API 609, API 617, API 618, API 623,

Ø NORSOK Standards: L-001 to L-005, M-004, M-630, M-650, R-002

Ø MSS Standards: SP 25, SP 43, SP 44, SP 55, SP 67, SP 75, SP 80, SP 83, SP 97

Ø ISO: e.g. ISO 15156, ISO 14692, ISO 15848

Ø Intergraph Smart® Materials for piping material data processing and procurement.

Ø Shop survey to approve vendors to meet the project requirements.

Ø Expedite the vendors to meet the project delivery schedule.

Ø Willing to travel to go to module fabrication yards, module integration in shipyards, vendor works for meeting/coordination, client meetings, etc.

Ø Provide assistance to module construction team during module fabrication, installation / mechanical completion / commissioning.

Ø Familiar and aware of collaboration between inter-discipline engineering activities.

Senior Commissioning Engineer

MODEC is looking for an engineer with a strong background of Commissioning to execute scope of EPCI project engineer commissioning function under CIC department in MODEC business areas including hull/topsides/mooring facilities.

Duties

• To support in developing project deliverables as per project & client requirement.

• Prepare responses to client queries.

• Prepare & Review of company development work methodology / procedures.

• Develop Supplier call out plan in consultation with commissioning leads and work closely with Supplier callout Coordinator to manage the supplier callout process during execution phase.

• Develop mobilization plan for discipline technicians following project execution plan.

• Develop required specification and Coordinate for set up of contract for commissioning support services i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, steam blow etc).

• Coordinating with Commissioning leads to preparing a list of temporary materials and testing equipment’s, tools, consumables and process procurement of such items.

• Coordinate with planner to create commissioning WBS codes/activities/duration within project schedule using system / sub-system definition.

• Input system interdependency (logic link) with in Project Schedule

• Input commissioning man hrs with in Project Schedule

• Integrate construction milestones, commissioning sequence, and project completion targets and provide master project schedule for use by site execution team.

• Define and develop schedule and quality monitoring method to support the project execution team.

• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

• Carry forward the MODEC HSEQ policies / requirements to the team and meet overall HSEQ objectives in all projects / feedback results to corporate HSEQ team.

• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on thestandard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

• Perform duties as per directives of reporting authority.

• Ensure all regulatory and statutory testing and requirements are performed and records are maintained.

• Day to day Planning of work, manage schedule & targets of the project as required.

• Identify and manage resource requirements to meet schedule and targets.

• Prepare and maintain commissioning records of site observations, testing processes and checklists

• Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed

• Prepare timely and accurate technical report for management and a reference for future.

• Travel to offshore project sites to support offshore commissioning / assist facility startup, as required

• Ability to set priorities and meet deadlines

• Ability to problem solve with or without the guidance of senior leadership

• To conduct analytical review of complex progress reports in order to systematically identify issues and from there, address these issues in a timely manner.

• Disciplined in time management and independent in handling/prioritizing complex work requirements within the project’s stringent timelines.

• Interact with other departments i.e., engineering, contracts department for obtaining engineering and specific vendor documents & details.

• Willingness to work and train others in a team environment, assisting other multi-cultural and interdepartmental team members

• Guides and motivates the Commissioning team to carry out work within the stringent project timelines through awareness of the project’s unique constraints.

Qualifications

• Bachelor's Degree in Engineering with 8 to 14 years' work experience (or) Master's Degree in Engineering with 6 to 12 years' work experience with minimum of 5 years' work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 11 to 17 years work experience (making the equivalent to degree) can also be considered

• Specialist knowledge of at least Three MODEC or related project line.

• Ability to define concepts of completion process.

• Experience in developing required technical specification and Coordinate for set up of contract for various support services required during commissioning i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, Steam blow etc).

• Has work experience in setting up an effective, objective oriented, and user-friendly commissioning execution plan / schedule for the successful Commissioning of any project in MODEC business areas.

• Work experience within strict regulatory environments and aligning commissioning independence with engineering compliance and contractual requirements.

• High safety awareness is mandatory. A good knowledge of managing simultaneous operations (SIMOPS) is essential.

• Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

• Shows evidence of good Organizing / Management skills.

• Demonstrate ability to take lead.

• Good communication skills.

• Commitment to take responsibility with willingness to personal growth.

Modec Offshore Production Systems (Singapore) Pte Ltd is a leading provider of solutions to the Floating Offshore Oil & Gas market for more than 50 years and we are currently looking for a Document Controller to join us.

Being part of Modec means being the protagonist of a challenging career and being in touch with the latest deep-water production systems, knowing that your career begins in Singapore, but your talent can take you anywhere in the world. If you want to be one of the greatest in the market, this is your opportunity!

We are currently based at Metropolis, Buona Vista, Singapore.

Overall Job Purpose

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Corrosion Assessment and Material Selection Studies for FSO/FPSO facilities (topsides/turret/marine) following Company Guidelines and Standards. The Lead Engineer may be also required to prepare such studies.

To lead, supervise, and guide Material and Corrosion Engineers in the preparation of Engineering deliverables associated with Materials and Corrosion discipline during FPSO / FSO projects FEEDs, Detailed Engineering and Execution phases effectively and efficiently according to the specified technical requirements, timelines, and budgets. The Lead Engineer may be also required to prepare such deliverables.

To interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss and assess lessons learned, root cause investigations, etc. for improvement of Corporate Standards and Philosophies.

Responsibilities:

• Fully understand MODEC standards, client and regulatory requirements and ensure its discipline engineers work and deliverables comply with the requirements.
• Support Senior Lead Engineer / Technical Authority participating in the review cycle and preparation of Corporate Standards related to Corrosion Assessment and Materials Selection, Sour Service, Welding, Surface Preparation and Coatings, Cathodic Protection, Piping and Valve Materials, etc.
• (Propose improvement for the Standards).
• Provide overall supervision, guidance and support to Material and Corrosion Engineers during FEED, Detailed Engineering and Execution phases.
• The Lead is expected supervise and/or perform work to ensure the work and deliverables are performed/ issued as per Company Standards and Guidelines, as per Project Technical Requirements, with required quality, within budget, and in line with Company Goal of maximizing value to Company and all stakeholders through the life of the facility (i.e. maximize life cycle profit and uptime).
• Provide Training and Couching to Material and Corrosion Engineers in the areas of corrosion assessment, material selection, coatings, metallurgy, cathodic protection, etc.
• Interact with Group Leads at other entities (Proposal Office, Operations, etc.) to discuss lessons learned, root cause investigations, etc.
• Liaise with Operations Integrity Teams to participate in the improvement of Corrosion Monitoring and Chemical Injection Optimization Strategies.
• Represent Materials Group in key stakeholder (Client / Supplier / Sub-contractor / Class) meetings, reviews stakeholders’ documents / comments and addresses interface/implementation/execution issues and escalates where necessary to ensure that the project proceeds timely and smoothly.
• Participate in Manufacturer Qualification Programs in conjunction with Quality Group
• Participate in Research and Development Programs in areas of Corrosion and Corrosion Mitigation

Requirements:

• Materials & Corrosion Engineering degree at Bachelor or Master degree level.
• Minimum 12 years (with Bachelor) / 11years (with Master) relevant working experience as Materials /Corrosion Engineer in Oil and Gas Sector.
• Comprehensive experience in Offshore Oil and Gas Processing Facilities related to corrosion, corrosion mitigation strategies, corrosion monitoring, material selection, surface preparation and coatings, cathodic protection, metallurgy (welding, manufacturing), etc. and comprehensive knowledge of Industry Codes and Standards (NACE MR 0175 / ISO 15156, ISO 21457, ASME B31.3, NORSOK M001, NORSOK M501, etc.).
• Lead Engineer should be familiar with processing facilities and understand main process concepts involving Oil Separation and Stabilization, Produced Water Treatment, Gas Sweetening and Dehydration, Gas Compression, Seawater Treatment, etc.
• ECE (corrosion model) (preferred) or equivalent corrosion model

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics

Purpose

To independently define concepts and critical deliverables, lead, plan, manage, control, engineering deliverables required for the assigned project effectively and efficiently according to specified technical requirements, timelines and budget, manage project resources and independently deal with and resolve all issues of the project, and provide guidance to the assigned team.

Core Responsibilities

• Understands the specific specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Plans and directs the running of process simulation software, prepares design calculation, performs simulation studies, and reviews the datasheets prepared by Engineers and reviewed by Senior Engineers. Where necessary, directs/prepares/conducts simulation studies
• Directs Engineers and Senior Engineers in the team to develop engineering specifications(drawings, data sheets etc.) specific to the assigned project, reviews them and validates with the Project Manager and client before incorporating them in the RFQs.
• Independently evaluates all the bids received for process and utility packages from various suppliers, performs a technical bid evaluation process, involves in cost estimation, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications and gives assessment to the Buyer who will follow up in the tender evaluation, price negotiation and award process.
• Reviews/checks draft drawings and documents from team members and ensure the timely provision of accurate documents and specifications to the successful vendors to enable the latter to execute their work and deliverables.
• Independently manages/develops solutions to technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and evaluating various options/measures using experience, precedents and professional references. Anticipates potential problems and takes preventive actions to overcome obstacles
• Visits suppliers, reviews test results of process equipment to ensure that they function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the deficiencies making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and addresses interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly.
• Plans and organizes resources and schedule to meet project timelines and departmental objectives
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up with stakeholders to rectify the gaps or problems. Where necessary, provides off‐site support and advice.
• Guides/supervises junior Engineers and appraises their performance.

Relevant Experience:

• Minimum 12 years of relevant working experience in process engineering in oil and gas sector for degree holders or minimum of 11 years of relevant working experience for Master degree holder
• Experience in managing detail engineering as Lead engineer.
• Minimum 1 EPCI project for marine process engineering as lead engineer
• Direct work experience on FPSO/FSO projects
• Minimum 1 to 2 years of relevant working experience in Shipyard.
• Must be conversant of applicable industry standards, Company standards, specifications and procedures for his/her functional area.
• Experience in AVEVA Engineering, Process simulation (e.g.UNISIM Design, etc.), Piping system transient analysis and hydraulics (e.g., Flowmaster, etc.) and Fire water system hydraulics (e.g.Pipenet, etc.)