Total 229 chemical engineer job vacancies in Construction / Property category in The United States of America

• Under limited supervision, responsible for moderately complex technical work in a wide range of environmental, safety and health disciplines to achieve compliance with ES&H standards along with federal and state regulatory requirements. 
• Maintains current knowledge of specific government agency requirements. 
• Exhibits knowledge and applies the fundamental concepts, practices and procedures of their environmental specialty. 
• Independently determines and develops approaches to solutions. 
• Develops, implements and maintains safety and health programs, systems and procedures. Monitors and prevents hazards and diseases in the work area. 
• Investigates accidents, injuries, and complaints concerning hazards in the workplace. 
• Recommends improvements in processes, design, procedures and operating equipment to minimize hazards. 
• Develops and conducts employee training, emergency preparedness and assures the quality of programs. 
• Provides regulatory interpretation and technical advice. 
• May act as a lead role for a team of ES&H specialists and/or support personnel.  
• May administer an ES&H program on a small or medium-sized project.

Unleash Your Potential

At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.

If this sounds like an environment where you can thrive, keep reading!

NISC has an opening for a Project Engineer to support the Federal Aviation Administration at the Denver Air Route Traffic Control Center (ARTCC). The Project Engineer will be responsible for supporting En Route Facilities project team members in executing construction project(s) and to ensure that the work performed is in conformance with the project objectives and the requirements of the specification documents. Primary areas of responsibility include cost and schedule management support, reviewing design documents and facility condition assessment reports, document control, verification of as-builts, supporting quality control, supporting site safety, and following up on closeout documentation. Position is located in the specified ARTCC and may require periodic travel (10%).

If you're looking for a challenging and rewarding career, apply today. Take the first step towards an exciting new chapter in your professional journey!

Your greatest work is ahead!

The Mission
 

Leidos Digital Modernization Sector helps modernize infrastructure, systems, and security. We are a trusted partner to both government and highly regulated commercial customers looking for transformative solutions in mission IT, security, software, engineering, and operations. We work with our customers including the FAA, DOE, NASA, National Science Foundation, Transportation Security Administration, Custom and Border Protection, airports, and electric utilities to make the world safer, healthier, and more efficient. Our customers take on the toughest challenges out there, and at times need a helping hand from specialists in their fields. We combine our scale as a Fortune 500 company with the deep technical knowledge of our core capabilities and the expertise of our talented and diverse workforce to deliver mission-centric innovations. For each of these core capabilities, we have developed proven, repeatable processes that help us deliver agile, cost-effective solutions to foster a better world.  To explore and learn more, click here!

Are you ready to join a team dedicated to a mission? Begin your journey of a flourishing and fulfilling career, share your resume with us today!

Basic Qualifications

• A Bachelors or Master’s degree in Architecture, Civil Engineering, Mechanical Engineering, Electrical Engineering, or Construction Management/Administration and 8+ years of experience managing or working on construction and facility projects including field experience and oversight through planning and execution phases. 4 years’ of relevant experience may be substituted for degree.

• Ability to prepare and provide to the customer briefing packages for Program Management Reviews (PMR), En Route Facilities and Building Systems (EFaBS) meetings, Project Management Plans, Schedules, and various pop-up requirements

• Ability to track and report costs, schedule, and technical performance on projects and help identify potential issues at the program and project levels

• Ability to develop Project Management Plans (PMPs) and establish scheduling reports

• Participate in meetings to discuss project execution, schedules, technical performance, and provide recommendations for improvements, as appropriate.

• Ability to provide and ensure consistency and accuracy in administering procedures at the project level and in the reporting of project data

• Experience in conducting research on specified topics, determining conclusions, and presenting the results in a logical and concise manner

• Experience in reviewing and comparing reports and summarizing them for upper management

• Ability to organize and gather data, conduct analysis, prepare reports and organized documentation without assistance

• Strong written and verbal communication skills

• Ability to work as a part of a specialized team that handles various aspects of project management and coordinate the work if needed.

Desired skills

• Familiarity with FAA Technical Operations.

• Knowledge of and experience in FAA ARTCCs.

• Familiarity with building systems including HVAC, Electrical, Mechanical, Plumbing, Control Systems, Fire and Annunciation alarm systems, and local construction codes

• Familiarity with the Federal Aviation Administration (FAA) and systems in the National Airspace System (NAS)

• Ability to develop cost estimates and validate external cost estimates from vendors

• Experience using Project Management principles for managing construction projects

• Experience using Lean/Six Sigma principles and tools for process improvements

• Experience using Lean Construction methodologies

• Skilled in the use of database management and project management software

• Knowledge of and experience managing FAA Knowledge Sharing Network (KSN)

• Experience in conducting effective technical presentations to management and tactful coordination with a variety of project stakeholders

• Experience in assessing and identifying construction projects potential risks, and implementing processes and procedures to ensure safety and financial prosperity of the organization  

• Experience in collecting and analyzing data to estimate time, cost, materials, and labor required for construction projects.

Clearance

• While a clearance is not required to be considered for the position, the ability to obtain a clearance (i.e., Public Trust) is required if hired.

At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. We’d like to learn more about you, apply today!

Original Posting Date:

2024-02-09

While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

Pay Range:

Pay Range $68,900.00 - $124,550.00

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Responsibilities:

• Responsible & ensure smooth implementation and monitoring of work at the site
• Gather, check site date, recording and monitoring of site work progress/ productivity
• Prepared technical write-up for tender submission including drawings, methodology and program
• Liaise with design consultant to ensure completion of deliverables
• Prepared document for tender submission
• Liaise with design consultant to ensure completion of deliverables
• Procurement and estimating of trackwork materials
• Assisted in preparing presentation slides for internal management review and tender interview with client.

Requirements:

• Min Diploma / Degree in Civil Engineering or its’ equivalent
• Experience in underground civil works (tunnelling) ,Diaphragm Wall, Bore Piling is a plus
• Experience in LTA/MRT Project is an advantage
• Able to lead and work independently

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume julie@talenttradersg.com

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Title:

R & D Architect Support Engineer/Systems Engineer - TS/SCI

KBR is seeking a R&D Architect Support Engineer/Systems Engineer. This position will serve as a technical member of a dynamic systems engineering team supporting the NRO Ground Directorate (GED)/Advanced Ground Group (AGG) organization.  The candidate will support the Applied Research & Development (R&D) acquisition, integration and test initiatives with a specific focus area.   Specifically, the candidate will support pathfinding and transition of applications and mission capabilities to the operations environment for Multi-Intelligence hard intelligence problems. 

Responsibilities include:

• Provide Day-to-Day collaboration with the Government Customer, FFRDC teams, SETA and GED development contractors as well as External Agency mission partners
• Provide oversight, monitor development and integration activities and ensure alignment of priorities and resources consistent with US Government requirements and objectives
• Analyze a wide variety of mission thread projects for impact on the existing and planned system architecture
• Assist in ensuring decisions about AGG R&E Systems are consistent with an open-architecture construct
• Advise Senior and mid-level US Government managers on acquisition decisions regarding a portfolio of AGG projects
• Support technical consultation, meeting coordination, and prepare and present architecture and acquisition recommendation briefings
• Establish and maintain the System View-1 (SV-1) Systems Interface Description document baseline linking together the operational and systems architecture
• This position requires an understanding of the intelligence community and customer domain, along with a strong focus on core systems engineering processes in support of end-to-end mission and services closure

Required Qualifications:

• B.S. in engineering, physics or related technical degree or relevant experience
• Experience in space/ground aerospace systems engineering
• Knowledge of system architectures, architecture evolution and interface definition
• Demonstrated knowledge of the NRO with special emphasis on Ground Systems
• At least 35 years’ experience with space/ground testing and systems engineering, systems integration, Verification, Validation and Transition (IVV&T) activities
• Experience supporting agile software development and verification strategies and integration of new systems and initiatives in support of expanded mission capabilities
• Experience with test strategies and plans, executing tests, analyzing data and summarizing results

Desired Qualifications:

• Experience with architecting in an agile software development paradigm
• Demonstrated understanding of Model-Based Systems Engineering (MBSE)
• Ability to perform architecture analysis, trades, and system integration closure activities
• Experience within an acquisition office in the NRO, NGA or related Intelligence Community
• Prior experience with NRO ground mission processing or mission control systems, and/or mission operations is highly desired
• Experience with commercial IVV&T techniques in service-oriented architecture (SOA) environments is also highly desirable
• Experience interacting with User Community across a wide variety of intelligence and phenomenology disciplines

Security Clearance Requirements: Active TS/SCI with poly required

KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Title:

R & D Architect Support Engineer/Systems Engineer - TS/SCI

KBR is seeking a R&D Architect Support Engineer/Systems Engineer. This position will serve as a technical member of a dynamic systems engineering team supporting the NRO Ground Directorate (GED)/Advanced Ground Group (AGG) organization.  The candidate will support the Applied Research & Development (R&D) acquisition, integration and test initiatives with a specific focus area.   Specifically, the candidate will support pathfinding and transition of applications and mission capabilities to the operations environment for Multi-Intelligence hard intelligence problems. 

Responsibilities include:

• Provide Day-to-Day collaboration with the Government Customer, FFRDC teams, SETA and GED development contractors as well as External Agency mission partners
• Provide oversight, monitor development and integration activities and ensure alignment of priorities and resources consistent with US Government requirements and objectives
• Analyze a wide variety of mission thread projects for impact on the existing and planned system architecture
• Assist in ensuring decisions about AGG R&E Systems are consistent with an open-architecture construct
• Advise Senior and mid-level US Government managers on acquisition decisions regarding a portfolio of AGG projects
• Support technical consultation, meeting coordination, and prepare and present architecture and acquisition recommendation briefings
• Establish and maintain the System View-1 (SV-1) Systems Interface Description document baseline linking together the operational and systems architecture
• This position requires an understanding of the intelligence community and customer domain, along with a strong focus on core systems engineering processes in support of end-to-end mission and services closure

Required Qualifications:

• B.S. in engineering, physics or related technical degree or relevant experience
• Experience in space/ground aerospace systems engineering
• Knowledge of system architectures, architecture evolution and interface definition
• Demonstrated knowledge of the NRO with special emphasis on Ground Systems
• At least 35 years’ experience with space/ground testing and systems engineering, systems integration, Verification, Validation and Transition (IVV&T) activities
• Experience supporting agile software development and verification strategies and integration of new systems and initiatives in support of expanded mission capabilities
• Experience with test strategies and plans, executing tests, analyzing data and summarizing results

Desired Qualifications:

• Experience with architecting in an agile software development paradigm
• Demonstrated understanding of Model-Based Systems Engineering (MBSE)
• Ability to perform architecture analysis, trades, and system integration closure activities
• Experience within an acquisition office in the NRO, NGA or related Intelligence Community
• Prior experience with NRO ground mission processing or mission control systems, and/or mission operations is highly desired
• Experience with commercial IVV&T techniques in service-oriented architecture (SOA) environments is also highly desirable
• Experience interacting with User Community across a wide variety of intelligence and phenomenology disciplines

Security Clearance Requirements: Active TS/SCI with poly required

KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

- Carry out project planning, scheduling, good documentation system and project management.

- Prepare, review and submit all detailed programmes, schedule, method statement, technical details and risk assessment plans.

- Conduct regular site inspections, undertake project status review meetings/safety meetings in ensuring quality and timely deliverables.

- Lead a team of professional and technical site staff in planning and execution of day-to-day operations.

- Ensure adherence to project scope and requirements.

- Provide timely project progress reporting to Management.

- Work closely with clients, project team, relevant authorities and subcontractors.

- Control and monitor work progress and ensure work quality, smooth delivery, and timely completion of projects.

- Ensure the successful handover of all projects handled.

Skill Preferable:

- Strong technical background with understanding or hands-on experience in software development and web technologies

- Proficient in Microsoft Office

- Working experience with at least 3 years of relevant working experience

- Able to communicate well in English

Job Description:

Parsons is looking for an amazingly talented Senior Resident Construction Engineer(Civil, Buildings & Facilities) to join our team! In this role you will get to lead the substructure, superstructure, wet trades,  landscape, hardscape, site drainage and grading as part of the residential team and will be supported by other specialist engineers and departments.

What You'll Be Doing:

• Coordinates closely with Contractors’ structural/civil/geotechnical engineer to insure that mass grading is

  properly coordinated with roads and building foundation systems.

• Applies a pro-active Health and Safety attitude to their works packages.

• Assists Contractor with coordination of other related trades (i.e. plumbing, fire protection, site drainage,

  landscape, hardscape, structural, wet trades, mechanical etc.)

• Witnesses Contractors’ quality control inspections to ensure that the permanent works are constructed

  according to the contract, applicable codes, standards, approved drawings and specifications

• Reviews Contractor-submitted shop and as-built drawings, materials submittal's, tie-in procedures, project

  schedules, and work permits; and assists RCEC in obtaining their approval and/or comments.

• Reviews Contractors’ structural quality assurance and quality control programs, inspection and test plans,

  installation, testing, and as-built procedures, for all civil engineering systems and comments for transmittal to

  the contractors.

• Arranges meetings between the Contractor and concerned departments/organisations to resolve interfacing

  problems during construction.

• Organises, coordinates, and conducts in conjunction with the concerned departments/organisations

  acceptance inspections and re-inspections of the completed permanent works, until all deficiencies are

  corrected and signed off.

• Assists the Project Controls Cost Engineer, or Contract Administrator, by reviewing Contractors’ invoices for

  correctness of installed quantities for the Civil portion of the permanent works.

• Attends regularly scheduled meetings between the Construction team and the Contractor

• Initiates and prepares for SRCM and RCES draft Civil related letters, memos or reports to Contractors and

  other Departments.

What Required Skills You'll Bring:

• Bachelor’s Degree in Civil Engineering or related field from recognised University with minimum of 8 years of

  construction experience.

• Must be fluent and be able to effectively communicate in both spoken and written English.

• Knowledge of computers and basic software applications: MS Office (Word, Excel, Power Point), read

  construction schedules (Primavera).

 

Minimum Clearance Required to Start:

Not Applicable/None

Parsons is an equal opportunity employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran.

Responsibilities

• Supervise and coordinate the activities of site contractors

• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions

• Ensure all Structural work is carried out within established budgets and schedules

• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards

• Implement and oversee site projects assigned to ensure smooth project execution

• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications

• To coordinate with subcontractors/suppliers to execute contract works

• Maintaning the documentation of the construction projects,Adhering to all the environmental and safety standards

• Assist in planning, schedule and technical support to PM

Requirements:

Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore

• Min 4 years relevant experience (building construction projects)

• Use of Autocad and MS office would be an advantage

Senior Construction Engineer with experience in post-tensioning, structural repair, bearing replacement, and heavy lifting is a key figure responsible for overseeing construction projects. This role demands a high degree of independence and level of technical expertise, project management skills, cost control acumen, schedule management proficiency, and unwavering commitment to safety and quality.

Key Responsibilities:

1. Independent Work:

· Demonstrate a high level of autonomy in managing and overseeing specialized construction projects.

· Take initiative in decision-making and problem-solving within your areas of responsibility.

· Provide guidance and mentorship to junior engineers and project teams.

2. Multi-tasking:

· Manage and oversee multiple projects simultaneously.

· Prioritize tasks and responsibilities across projects to meet deadlines and objectives effectively.

· Adapt to changing project demands and swiftly address any emerging issues or challenges.

3. Method & Technical:

· Develop and implement construction methodologies and techniques specific to post-tensioning, structural repair, bearing replacement, and heavy lifting.

· Collaborate with clients to analyse project requirements and develop innovative solutions.

· Troubleshoot complex technical issues and implement solutions in real-time.

4. Cost Control:

· Develop project budgets and cost estimates, considering all aspects of specialized construction activities.

· Monitor project expenses and financial performance, identifying cost-saving opportunities.

· Collaborate with procurement teams to optimize material and equipment purchases.

5. Schedule & Program:

· Create project schedules and programs.

· Continuously update and adjust schedules to maintain project timelines and meet critical milestones.

· Identify potential scheduling conflicts and develop mitigation strategies.

6. Safety & Quality:

· Establish and enforce rigorous safety protocols and standards specific to the specialized construction activities.

· Conduct safety assessments and risk analyses to mitigate potential hazards.

· Implement stringent quality control and assurance measures to meet project specifications and industry standards.

· Collaborate closely with quality assurance teams to uphold and enhance construction quality.

Qualifications:

· Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.

· Extensive experience in construction engineering, with a focus on post-tensioning, structural repair, bearing replacement, and heavy lifting projects.

· Proficiency in specialized construction techniques and equipment.

· Strong project management skills, including budgeting and scheduling expertise.

· Knowledge of construction methods, materials, and regulations within the specialized domains.

· Good communication, leadership, and problem-solving abilities.

· Dedication to maintaining the high standards of safety and quality in all specialized construction activities.

A Senior Construction Engineer in this specialized role is instrumental in the successful completion of complex construction projects, ensuring they are executed efficiently, within budget, and in strict adherence to safety and quality standards. The position requires a unique blend of technical mastery, project management excellence, and an unwavering commitment to safety and quality assurance.

Senior Quantity Surveyor Engineer | Assistant Manager (QS) – Electrical Engineer | Outram

Work Location: Outram Road (Near to Havelock Mrt)
Working Days: 5 Days (Mon-Fri)
Working Hours: 8.30am to 5.30pm
Salary range: $4500 - $5000

Job Description

• To handle and calculate the quantity and costing of the different tender assignment. Technical review on the supplier/contractor quotation or proposal and make sure that all requirements are complied.
• Familiar and able to understand general contracts and various documents.
• Able to provide budget cost or estimates as per instruction.
• Liaise with suppliers for their products and services presentation.
• Able to design and look for solution regarding any technical problems during tender.
• Able to communicate with other Departments in dealing with various documents and issues.
• Coordinate with the supplier/contractor regarding follow up on bills and quantities.
• To evaluate and check on market unit rates monthly /quarterly for material and labour cost.
• To handover all tender document and costing to project team once the tender is awarded.
• To attend site show round for those tender that we are interested.
• To reply tender clarification, preparation for tender interview and presentation.

Requirement

• Diploma or Degree in Electrical Engineering
• Work as Quantity Surveyor for at least 5 to 8 years’ experience
• Experience in an M&E sub-contractor environment will be preferred.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description:

Parsons is looking for an amazingly talented Resident Construction Engineer-Electrical to join our team! In this role you will join a leading professional engineering, construction and cost management team that is involved in multiple projects with Royal Commission for Jubail and Yanbu in Jazan Industrial City.

What You’ll Be Doing

• Works with the Senior Resident Construction Manager (SRCM) and other project engineers.
• Monitors construction contractors’ electrical installation and testing activities.
• Witnesses electrical testing, pre-commissioning, commissioning, and start-up activities.
• Reviews contractor-submitted shop drawings and as-built drawings, materials submittals, tie-in procedures, project schedules, and work permits and coordinates with the concerned departments for their comments.
• Coordinates and organizes periodical and required meetings between the contractor and concerned departments to resolve interfacing problems during construction
• conducts acceptance inspections and re-inspections of the completed permanent works thereafter, until all deficiencies are corrected and signed off by all
• Reviews contractors’ invoices for completeness and correctness of installed quantities for the electrical portion of the permanent works.
• Initiates and prepares for SRCM draft electrical related letters, memos or reports to contractors and other Departments.
• Conducts periodical required meetings between the stockholders and the Contractor for project progress and to address any issues during the project life cycle.

What Required Skills You’ll Bring

• B.S. degree in Electrical Engineering from an accredited recognized university with 10 years of experience in electrical engineering and construction projects with particular emphasis on:
• Medium Voltage (13,8 KV) and Low Voltage (120 V – 240V – 400V) electrical systems
• Electrical power distribution systems
• Building electrical power distribution systems and equipment
• General electrical calculations and electrical theory
• General load flows, calculations, basic relay and protection coordination
• One-lines Pad mounted Transformers and Switches (or unit substations and RMUs)
• Lighting systems – exterior and interior
• Cabling
• Coordination with other utilities and disciplines
• Appropriate building electrical codes, construction methodology and requirements (NESC, NEC, IEC. IEEE or other related codes and standards).
• AutoCAD is a benefit, but not a requirement
• Must be able to communicate effectively in the English language
• Knowledge of computers and basic software applications: MS Office (Word, Excel, Power Point).

                                 

Minimum Clearance Required to Start:

Not Applicable/None

Parsons is an equal opportunity employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran.

Responsibilities:

• Manage the financial & contractual of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analyses & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• No experience is required, training will be provided
• Strong in arbitration and negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

Responsibilities:

• Manage the financial & contractual of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analyses & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Strong in arbitration and negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

If you have the drive and capabilities, please apply with a detailed cv to our career portal at:

https://hrsembcorp.darwinbox.com/ms/candidate/careers/a64e45e3938ee2

Only shortlisted candidates will be notified. Thank you for your interest.

Role Purpose:

Construction Engineer is responsible for coordinating the construction activities and delivering the assigned construction work scope by meeting the specifications stipulated, timeline, and HSEQ requirements. Supervise and inspect the construction activities of the multi-discipline assigned in either electrical, mechanical, piping, painting or structure discipline in the FPSO/FSO construction. Construction engineer reports to either site manager or construction manager.

Responsibilities:

• Study and monitor the project contracts and requirements, which include contracts between client and COMPANY & contracts between subcontractors and COMPANY.
• Discuss and prepare the construction plan and strategy in close collaboration with construction manager or site manager.
• Ensure subcontractor has sufficient Workfront and no impact caused by delivery delays.
• Ensure the sub-contractor has all the required resources to complete all activities.
• Prepare and issue detailed work packs for integration and carry over work.
• Assist construction manager in the development of manning plan.
• Review and ensure vendors are mobilized when required as per schedule.
• Review and ensure main sub-contractor mobilize specialist sub-contractors in line with the project schedule.
• Reviews and ensures subcontractors detailed overall planning, schedules, manning levels are aligned with company’s expectations.
• Review and ensure construction material delivery is aligned with forecast schedule and coordinate and expedite any shortfalls.
• Regularly monitor the master construction schedule and advise yard team and COMPANY construction team on priority work areas.
• Ensure all construction activities and systems are completed as per priories, construction, and commissioning sequence.
• Ensure that all construction milestone dates can be achieved as per schedule.
• Assist in the management of document control process throughout the duration of project.
• Ensure that site document control procedures are being followed and all latest revision documents received, filed, and distributed to concerned parties.
• Review and ensure all engineering deliverables are being received in line with forecast schedules.
• Review construction supervisors and QC inspector’s daily reports for progress and concerns.
• Review yard reports and summarize the highlights, concerns, and potential impacts.
• Attend meetings with sub-contractor and client and communicate all requirements and concerns related to the project.
• Coordinate with sub-contractors, construction team and QV team to expedite and ensure successful construction activities.
• Supervise and inspect construction execution for the incumbent’s particular discipline and day-to-day activities.
• Apply the knowledge of assigned discipline, such as structure, piping matters, electrical, painting, and mechanical equipment installation sequences with the view of constructability and progress.
• Organize, direct, and supervise sub- contractors to ensure construction & installation procedure strictly follow drawing & relevant regulation requirement and equipment vendor’s specification.
• Conduct regular inspection and ensure that sub-contractor site work team work according to construction’s requirement.
• Manage and execute the site works and plans at the yard and ensure that the technicalities of construction requirements and standards are adhered to.
• Responsible for the successful delivery of yard project scope within specified quality standards, time and budget.

Qualifications:

• Bachelor’s Degree or Technical college certificate.
• Track record of construction of at least 2 FPSO project with module fabrication, integration of marine and topside modules.
• Minimum of 6 years work experience in EPC of onshore/offshore oil and gas or FPSO projects.
• Intermediate AutoCAD
• PC skills with proficiency in MS Office
• Comprehensive knowledge in construction management, project management, construction methodology principles, quality assurance and HSSE requirements.
• Strong working knowledge of contractual documentation (contracts, waivers, addendums, annexes, scope changes, contractual schedule etc.) and ensures planning and execution complies with contractual requirements.
• Identifies elements of project design, contract and construction likely to give rise to disputes.
• Provide technical input and directions to mitigate the issues.
• Mainly works at construction site environment. Will be assigned to work full time at the appointed project site, including international locations where applicable. - Normal exposure to hazards such as noise, heavy equipment, temperature extremes, chemicals, etc. for construction site environment. -80-90% site work, 10-20% office work for planning phase prior to site-in.

R1552011

Peak Ocean EA License No. 18C9336

Roles & Responsibilities:

• Design and formulate adhesive products and synthesize fine chemical and specialty chemicals
• Adhesive analysis, development & inspection
• Document & sample preparation
• Provide technical support to the Sales Department
• Perform calibration and maintenance of lab equipments
• Maintain documentation for work procedures in accordance with ISO standards
• All other ad-hoc duties as assigned

Requirements:

• Degree in Chemistry or Chemical Engineering
• Minimum 3 years of relevant work experience / manufacturing environment is preferred
• Experience in the adhesive, paint, and chemical industry is preferred
• Mature, possess effective communication skills and able to interact with people at all levels
• Computer-literate with knowledge of MS Office applications (i.e. Excel, PowerPoint and Word)