Total 230 Telecommunication Engineer job vacancies in Art / Design / Entertainment category in The United States of America

The Design Engineer is responsible for assisting the Senior Design Engineer on structural analysis and design compliance for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department
• Adherence to safety practices in the workplace.

Qualifications and Education Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 1 to 2 years of experience in design and construction
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Note: Open for fresh graduates.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Job Summary: As a Design Engineer in our organisation, you will play a crucial role in the product development process. You will be responsible for designing and developing new products, improving existing ones, and ensuring that our products meet the highest quality standards. This position offers an exciting opportunity to work on cutting-edge projects and contribute to the growth and success of our company.

Key Responsibilities:

1. Product Design: Collaborate with cross-functional teams to conceptualize and design new products or product improvements, taking into account functionality, manufacturability, and cost-effectiveness.

2. CAD Modelling: Utilize computer-aided design (CAD) software to create detailed 2D and 3D models of product designs, ensuring precision and accuracy.

3. Prototyping: Oversee the development of prototypes and conduct testing and analysis to validate design concepts and make necessary adjustments.

4. Material Selection: Evaluate and select appropriate materials for product components, considering factors such as durability, cost, and performance.

5. Quality Assurance: Work closely with quality control teams to establish and maintain quality standards for products, ensuring they meet industry regulations and customer requirements.

6. Cost Optimization: Continuously seek opportunities to reduce production costs while maintaining product quality and performance.

7. Documentation: Prepare comprehensive design documentation, including drawings, specifications, and reports, to facilitate the manufacturing process.

8. Collaboration: Collaborate with other engineers, project managers, and stakeholders to ensure effective communication and coordination throughout the product development lifecycle.

Qualifications:

• Bachelor's degree in Mechanical Engineering or a related field.

• At least 4 to 5 years of proven experience as a Design Engineer in a manufacturing environment.

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD).

• Strong analytical and problem-solving skills.

• Knowledge of materials, manufacturing processes, and quality standards.

• Excellent communication and teamwork abilities.

• Ability to manage multiple projects and prioritize tasks effectively.

1. Designing and developing mechanical components, systems, and products using 3D CAD software such as SolidWorks, or Inventor.

2. Conducting feasibility studies, design calculations, and simulations to evaluate the performance and cost-effectiveness of different design options.

3. Collaborating with cross-functional teams, including product managers, manufacturing engineers, and quality engineers to ensure designs meet performance, cost, and manufacturability requirements.

4. Creating detailed engineering drawings and specifications for production and assembly.

5. Conducting design reviews and participating in the testing and validation of prototypes and final products.

6. Managing projects, including planning, scheduling, and coordinating with suppliers/vendors.

7. Able to work independently for engineering design & development activities and to support new product design

8. Understand client requirements & Custom build newproductst or redefine the designs.

9. Engineering disposition onin-processs items .

10. Creating BOM of designs and identifying suitable product specification for new projects

Daily duties involves (but not limited to)

Design the new product as per the client requirement (SS / MS / Aluminium)

Ensure the laser machine schedule is followed as per the client / company requirement

Mantain the laser machine, bending machine, other machineries to its standard

Knowledge in laser machine is a MUST qualification to apply this job

Seeking an Design Engineer with a hands-on approach and a knack for creativity. This exciting opportunity is with a leading manufacturer of control systems for small vehicles and vessels, based in the vibrant city of Edinburgh. If you're not local, don't fret - relocation assistance may be available.

The Role:
As an Design Engineer, your duties will include:
* Not just sitting at a desk using CAD, but actually getting your hands dirty.
* Working with tools at a component level, in addition to design work.
* Building and testing your designs, using your creativity to find innovative solutions.


The Candidate:
The ideal Design Engineer candidate will:
* Be an electronics hobbyist with a passion for hands-on work.
* Have a creative mindset, ready to find unique solutions.
* Be willing to relocate to Edinburgh if not already based there.
* Have experience working with control systems although this isn't a requirement as it can be learned.

Our client is a renowned manufacturer of control systems. They are known for their innovative designs and high-quality products. Based in Edinburgh, they offer a vibrant and dynamic working environment where creativity and hands-on experience are highly valued.

If you're an Design Engineer looking to take the next step in your career, this could be the perfect opportunity for you. Apply today and join a team of innovative engineers making waves in this industry.

If you've previously held roles such as Electronics Engineer, Electrical Design Engineer, Subsea Engineer, Electrical Engineer, or CAD Engineer, you may find this Electrical Design Engineer role of interest.

Coburg Banks Limited is acting as an Employment Agency in relation to this vacancy.

Design Engineer

23 days holiday + banks

Flexi-hours

Pension

£42,000-£54,000 p/a

And more!

We currently have an amazing opportunity for a 3D design engineer to join a growing multi-national team in aylesbury. Working collaboratively with staff across multiple offices in a tool-making/engineering environment.

Responsibilities:

• Design for manufacture
• Design qualification
• Collaborating with design team and engineering staff
• Be a primary contact for clients (depending on experience)

Experience:

• Previous design experience in a tool-making/engineering environment
• Experience with Siemens NX is preferred
• Experience designing to tight tolerances
• Ability to work effictively in a team

Unfortunately, this role does not offer sponsorship at this time.

Design Engineer

23 days holiday + banks

Flexi-hours

Pension

£42,000-£54,000 p/a

And more!

If you are interested in this position please click 'apply'.

Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors.

Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job Responsibilities

· Design, review and optimize piping layouts and detailed design to meet engineering and functionality requirement

· Prepare and review piping material specifications for compliance with ASME/Other relevant code requirements

· Coordinate / validate pipe stress analysis (Static and Dynamic Analysis)

· Provide recommendations for modification or validation of piping layouts

· Review / generate piping, support and isometrics drawings

· Review / generate steel structure drawings

· Generate piping/structural material take off list

· Review / generate and optimize facility layout and structural design

· Coordinate / validate design calculations according to project requirements

· Liaise with client, project managers in design works

· Provide value engineering proposals during tender and ongoing projects

· Coordinate and assist the project team regarding on site works

· Ensure site works are according to the design drawings

· Check through drawings and ensure drawings are according to the design calculation

· Prepare As-built drawings/calculation for submissions

Requirements

· Degree in Engineering in relevant MEP (mechanical, electrical and piping/plumping) related discipline.

· Several years of job experience in design & engineering of process plants is preferred.

· Good sketching skills and ability to communicate thoughts and technical ideas concisely

· Good communication skills essential for team-based working.

· Highly motivated, proactive and willing to take on new challenges

· Good time management habits and ability to multi-task

· Analytical problem solving

· Proficient in MS Office, AutoCAD (Plant3d , Revit, Advanced Steel would be advantage)

· Coordination and alignment with structural drawings

· Understand and clarify client requirements

Design Engineer

Presteigne LD8

Commutable from Knighton, Kington, Leominster, Hereford, Llandrindod Wells, Hay on Wye, Brecon, Ludlow, Craven Arms

Benefits:-

• £30-40,000
• Career progression opportunities
• 20 Days + Bank Holidays
• Pension

This is an opportunity to join a global business with multiple sites. Their product has a genuine positive impact on the end user, with market leading solutions. This role will provide excellent career opportunity whilst working in a secure team. This role will be well suited to an engineer with a few years of experience out of their degree.

Responsibilities

• The design and development of new products.
• Continuous improvement of existing products.
• Working with the production to team to ensure the output of good quality and reliable products.
• Responsible for creating technical files and administrative support.

Requirements

• Working Knowledge of SolidWorks CAD design.
• Relevant degree/HND in an engineering or related discipline.
• Experience working in a highly regulated industry.
• Experience of working in a manufacturing environment, RF welding, Plastic injection Moulding, Traditional Engineering, additive manufacturing and Electronics.

23713/610

If you are interested in this role or looking for something similar please contact Jack Lavis directly at jackl@hunterselection.co.uk or call for a confidential discussion on 02920 894900.

If you are interested in this position please click 'apply'.

Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors.

Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Your new company:
A growing but well established consultancy firm with a strong reputation for delivering innovative solutions on a unique blend of heritage, commercial, and life science projects. They encourage a strong work environment that values work-life balance, offering a 9-day fortnight work schedule and hybrid working.

Job Description:
They are seeking an Intermediate Electrical Building Services Design Engineer to work on a diverse range of projects, from heritage buildings to cutting-edge life science facilities. They are ideally looking for candidates who have some solid design experience but are looking to progress this to the next level by working on more complex projects and will offer plenty of support towards promotion and Chartership.

Responsibilities:

• Design and manage electrical building services projects
• Collaborate with multidisciplinary teams to ensure project objectives are met
• Ensure designs comply with relevant regulations and standards
• Provide technical support to project team members

Qualifications:

• Degree in Electrical Engineering or related field
• Proven experience in Building Services Engineering- (at least 3 years)
• Proficient in CAD/ Revit and will be able to work in a BIM environment.
• Excellent communication and teamwork skills

Benefits:

• Competitive salary of £35k - £45k per year
• Flexible working hours with a 9-day fortnight schedule
• Opportunities for professional development
• Hybrid working

What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

As Maintenance Plumber at Sodexo, you will be the go-to person, the one with the answers to everyone's questions, and the one who knows how to keep the facilities operating smoothly. You will be the specialist who will provide technical advice and support for the maintenance of equipment, building fabric, and utility services across the Wythenshawe Hospital estate. Join Sodexo and be part of something greater. You belong in a team where you can act with purpose and thrive in your own way.

What you’ll do:

• Ensure the safe operation and maintenance of all plant and equipment within the hospital estate, carrying out a range of repairs and new works to a high standard. You will be responsible for the service, installation, maintenance, and testing of complex systems.
• Comply with all Company and Client policies and procedures, and statutory regulations, including health and safety, safe working practices, hygiene, cleanliness, fire, COSHH. This will include your awareness of any specific hazards in your workplace
• Actively champion a safe and healthy environment for patients, visitors, and staff

What you bring:

• Experience repairing plant and equipment, as well as the ability to fault find, read drawings, diagnose, and repair equipment using your technical knowledge.
• NVQ Level 3 or Equivalent and have Building services Knowledge
• Ability to keep work pace and meet deadlines, along with good organisation skills
• Great communication skills, strong teamwork, and a positive attitude
• Capable of working as part of a team or unsupervised, and of remaining calm under pressure

What we offer: 

Working with Sodexo is more than a job; it’s a chance to be part of something greater. You’ll belong in a company and team that values you for you; you’ll act with purpose and have an impact through your everyday actions; and you’ll be able to thrive in your own way. In addition, we also offer a range of resources, rewards and benefits for our colleagues and their families:

• Unlimited access to an online platform offering mental health and wellbeing support.
• Employee Assistance Programme to help with everyday issues or larger problems where you may need additional support, including legal and financial advice, support with work related issues or personal issues such as bereavement.
• Access to a free health and wellbeing app that provides rewards for maintaining a healthy lifestyle and includes access to a 24hr virtual GP and various other services.
• The Sodexo Discounts Scheme, offering great deals 24/7 (also open to friends and family) and/or the prepayment cashback card.
• Money Insights and financial benefits via the Salary Finance Platform.
• Save for your future by becoming a member of the Sodexo Retirement Plan
• A death in Service benefit for colleagues who pass away whilst employed by Sodexo
• Opportunities to enable colleagues to grow and succeed throughout their career at Sodexo, including apprenticeships and a variety of learning and development tools.
• Cycle to Work Scheme to help colleagues to do their bit for the environment whilst keeping fit.
• Volunteering Opportunities to enable all colleagues to help support worthwhile causes in our communities.
• Flexible and dynamic work environment 
• Competitive compensation 
• Full training and full protective uniform supplied 

Ready to be part of something greater? Apply today! 

Sodexo reserves the right to close this advert early if we are in receipt of a high number of applications

Package Description

• Hours: 40 per week
• Shift pattern: Monday-Friday 08:00-16:30
• Rate of pay: £14.87 per hour
• The Candidate will be required to have a NVQ Level 3 or Equivalent and have Building services Knowledge

About The Company

About Sodexo

At Sodexo, our purpose is to create a better every day for everyone to build a better life for all. As the global leader in services that improve the Quality of Life, we operate in 55 countries, serving over 100 million consumers each day through our unique combination of On-Site Food and FM Services, Benefits & Rewards Services and Personal & Home Services.

• We are committed to being an inclusive employer. We are a forces friendly employer. We welcome and encourage applications from people with a diverse variety of experiences, backgrounds and identities. We encourage our employees to get involved with our Employee Networks such as Pride, Sodexo Working Parents, Sodexo Disability, So together, generations and origins. We have also launched Be Heard which is an employee network designed to bring black colleagues together (virtually) to bring about positive change.
• We’re a Disability Confident Leader employer. We’re committed to changing attitudes towards disability, and making sure disabled people have the chance to fulfil their aspirations.
• We’re a ‘ban the box’ employer, which means we don’t ask people to disclose their convictions unless the role needs a security check.
• We recognise the potential of people with convictions in the job market. Helping those with a criminal history securing employment is not only critically important for the individuals themselves but can also be hugely beneficial for wider society. Offering second chances can be an effective investment in local communities and a great solution for local skills and labour market needs.

Click here to read more about what we do to promote an inclusive culture.

Posted: 03/04/2024

Closing Date: 04/05/2024

Job Type: Permanent - Full Time

Location: NSW - South Granville

Job Category: Other



Full-time, permanent position
Based in our South Granville (NSW) or South Brisbane (QLD) offices
Join an industry leader who is supporting Australia move towards a renewable energy future


Job Description

Who are Consolidated Power Projects (CPP)? 
As part of the Quanta Services Group, a Fortune 250 Company, Consolidated Power Projects Australia (CPP) is an industry leader in utility and renewable high-voltage power solutions.  We specialise in the design, construction, commissioning and maintenance of high voltage infrastructure such as transmission substations, wind farms and battery storage systems. With over 550 employees and offices in Adelaide, Sydney, Melbourne and Brisbane, CPP are preferred partners

... Click here to view more detail / apply for Design Engineer ? SCADA

ROLE SUMMARY

Reporting to the Technical Manager APAC, and using an end-to-end consultative approach, the chosen candidate will develop technology solutions and roadmaps, and provide detailed and accurate scope of works, costs and design, whilst ensuring the successful handover to project engineering and delivery teams.

The Presales Design Engineer will continue to provide technical engagement throughout the project lifecycle, supporting a successful outcome, and driving the development of ongoing solutions and standards.

DUTIES AND RESPONSBILITIES

• Conduct survey services at customer sites, and obtain detailed information required to build accurate quotes.
• Consult with sales teams and customers to fully understand and identify requirements.
• Liaise with local installation partners to obtain and validate quotes.
• Produce solution designs that successfully deliver against the requirements.
• Work closely with the global standards team to produce solutions that fit with global strategies.
• Assist in the development of customer technology standards and roadmaps.
• Present proposed solutions to technical and non-technical clients
• Produce design documentation as required.
• Produce detailed design documentation and drawings as required using CAD.
• Oversee successful migration of projects from an opportunity to deployment.
• Provide technical leadership throughout the project lifecycle.
• Provide ongoing support and design approval to the Project Engineering team (post-internal handover).
• Following projects through implementation to ensure delivery as intended and providing the resulting feedback to the team.
• Liaise with suppliers and manufacturers, ensuring technical knowledge is gained to provide comprehensive consultancy.

SKILL SET REQUIREMENTS

• Excellent technical knowledge of AV & UC technologies and trends.
• Good understanding of enterprise networks, LAN and WAN.
• An up-to-date understanding of the AV marketplace including products and trends.
• Working understanding of CAD.
• Good understanding of Microsoft Office including Excel and Word.
• Ability to understand project schedule and plans.
• Excellent verbal and written communication skills.
• Excellent problem solving and troubleshooting skills.
• Excellent organizational skills and the ability to work on multiple projects.
• Ability to prioritize and work under pressure is essential.

Company Description

Our client’s mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. They have helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days), while delivering a maximum feature set in compact industrial designs. Their goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using their advanced ultra-low power system on chip (SoC) solutions.

Their innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. They value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. They embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. They encourage and nurture an environment for growth and opportunities to work on complex, interesting, and challenging projects that will create a lasting impact. Come join us on our quest for 100 billion devices.

Job Description

They are looking for an experienced Staff Design Verification Engineer to join our dynamic team in Singapore. The ideal candidate will have 8-12 years of experience in the field of semiconductor design verification and a proven track record of success in developing and executing verification plans for complex SoC designs. The Design Verification Engineer will be responsible for the verification of digital and mixed-signal designs, including systems-on-chip with multiple CPUs, and digital signal processors, security hardware, and other logic for IoT applications.

• The ideal candidate should have demonstrated successful design verification tasks at block, sub-system, and full-chip level.
• Must have participated in all phases of chip development, from creating test plans, creating testbench environment (SV/UVM), integrate VIP’s, automate test env for randomized testing and score boarding.
• Utilize UVM to create drivers, monitors, predictors, and scoreboards.
• In-Depth knowledge of SoC architecture with AMBA AXI/AHB/APB, DMA’s,Security, clock, and power-gating techniques is required.
• Responsible for verification of block(s) that includes writing tests, assertionand coverage for a block.
• Create tests to achieve coverage goals while verifying functionality.
• Develop support utilities for verification automation, test bench automation, regression, to improve productivity.
• Develop tests to evaluate power and performance aspects of the design.
• Perform gate-level-simulations and participate in supporting FPGA and Post-silicon bring-up

Requirements

• BSEE/MSEE Degree 8-12 years of experience at block, sub-system and full- chip verification.
• Strong in understanding multiple architectures, integrating 3rd party IP’s/VIP’s, have worked with mixed-signal designs with low-power design and verification challenges.
• Experience with System Verilog simulation required.
• Strong understanding/exposure to Design Verification for low-power batteryoperated designs highly desired.
• C based verification in an SoC environment is required.
• Experience with ARM processor-based designs and low-power designtechniques is a plus.
• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Makefile
• Technologies: ARM SoC (Preferred), AMBA AXI/AHB/APB, DMA, FlowControl, Serial Devices, QoS
• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Catfoss Recruitment Ltd are currently in partnership with an award winning M&E Consultancy with offices across the country. Due to continued business growth they are looking to recruit a Senior Electrical Design Engineer to their expanding team in Newcastle.

Our client provides a variety of MEP Design Services at affordable commercial rates with quick efficient turnarounds while maintaining a very high level of quality.
They have vast experience in a range of sectors from small retail refurbishments to large scale multi-million-pound M&E contracts.

Senior Electrical Design Engineer (Building Services): The Position
* Leadership of the electrical design of projects with minimal supervision
* Providing supervision including mentoring/coaching/development and performance management for a small team of Engineers.
* Ability to plan and execute to agreed plans
* Delivery of complex engineering solutions to agreed time scales and budgets
* Attend design team meetings, working with the wider client team to deliver projects
* Provide technical support for discussion with clients and suppliers
* Provide technical support and guidance for installation and commissioning activities

Senior Electrical Design Engineer: The Person
The ideal candidate would have:
* Experience of a similar role in a bespoke multi-disciplinary engineering environment.
* Providing technical support for discussion with clients and suppliers
* Experience in designing Power distribution systems generally at 230V
* Experience of Electrical CAD packages such as Amtech and Dialux
* Can work within a team or as an individual to achieve deliverables.
* Experience of working to ISO9001 or equivalent in a project based organisation.
* A high level of competence with IT systems and tools.

Senior Electrical Design Engineer - The ideal candidate would also have, but is not essential:
* Chartered Engineering status or working towards
* Affiliation with industry recognised bodies
* A good understanding of current regulations, particularly the latest wiring regulations.

Candidates whilst electrically biased, should also possess a good appreciation and knoweledge of mechanical building services design elements to effectively oversee multiple projects.

Senior Electrical Design Engineer suitable previous job titles: Electrical Design Engineer, Electrical Engineer, Senior Electrical Engineer, Electrical Design Project Engineer, Electrical Project Engineer, Design Engineer, Design Manager, Building Services Design Manager, Senior Building Services Design Engineer

Please apply ASAP!