Total 2,719 Junior Executive job vacancies in klang valley perak penang kedah kelantan melaka johor bahru

#Preferable mandarin speaker, Sabahan and Sarawakian are welcome

Customer Service

• Smile and greet slot players and customers.
•  Provide friendly, courteous and efficient service to the slot prayers and customers.
• Ensure and alert of the comfort and safety of the slot players and customers.
• Assist in the bar counter during the absence of tea lady.
• Buy food for customers when needed.

Cashier

• Responsible for the cage operation and cash in the cage/ cash drawer according to SOP.
• Maintain the cage and keep cash drawer clean and safe.
• Make sure the cash drawer is always locked and not to leave the cage without permission from the Duty Shift in Charge.
• Handle receipts and payments based on Club policies and SOP.
• Count and verify cash amount at beginning of the shift and balance funds at the end of the shift.
• Verify physical loose coins and bundled paper money.
• Handle credit/ debit cards according to SOP.
• Complete cashier gaming forms and reports.

General

• Assist slot players and monitor the players are behaving properly according to house rules.
• Promote gaming programs to the players.
• Ensure all the slot machines are functioning properly and alert to Duty Shift in Charge/ report to technicians if any malfunction and breakdown.
• Attend to minor issues, such as bill jam, etc.
• Wipe and clean slot machines, tables and ensure business premises is always clean and in tidily manner.
• Wear uniform and name tag while on duty in business premises.
• Report any irregularity to the Supervisor/ Duty Shift in Charge.
• Any other duties and responsibilities assigned by the superior.

Perks & Benefits

• Open culture
• Night Shift Allowances
• Bonus & incentives

Job Descriptions : -

• Ensure all areas within our business premises and the slot machines are in good orderly and working conditions at least 15 minutes before shift starts and during the whole duration of shift.
• Report duty at least 30 minutes before shift starts for daily opening in the event if you are Duty Shift in Charge.
• Supervise gaming operations and personnel in an assigned area according to the Standard Operating Procedures (SOP).
• Ensure that each station is covered by sufficient floor staff in each shift.
• Brief the floor staff on new rules and gaming programs.
• Issue opening and additional float to the cashier according to SOP.
• Monitor all cash, credit/ debit cards transactions carried out by the cashier according to SOP.
• Attend to machines payout request made by the customers and reset machines for next games.
• Ensure and verify machines before payment is made to the customers according to SOP.
• Do daily closing and make sure all records are recorded correctly and tally with physical cash.
• Ensure money in drawer is safely kept by the cashier at the optimum level according to SOP.
• Report machines malfunction to the technicians and brief next Duty Shift in Charge to follow up until such malfunction is solved in an efficient manner.
• Ensure the premises is clean and in tidily manner at all times.
• Ensure the electricity is switched off (except for the designated area and where power points are required to be switched on after operating hours) before leaving the property.
• Ensure the alarm system is activated and all doors are locked before leaving the property.
• Assigned keys must be kept properly according to the Company’s policies.
• Explain the house rules and games rules to customers.
• Attend to customers complaints in an efficient and courteous manner and report the complaints to the superior.
• Report if found any irregularity to the superior immediately.
• Any other duties and responsibilities assigned by the superior, Executive/ Manager.

Perks & Benefits

• Personal leave
• Open culture
• Public holiday
• Medical Insurance
• Panel Clinic
• Salary is negotiable

Job Descriptions :-

• To recruit new customers/members.
• To plan, organize and execute marketing strategies and events for the operations.
• To maintain good relationship with customers/members.
• To call customers/members who are not active and invite them to the club by holding events/functions.
• To conduct market survey and analyse the market information and trends, customers’ needs and feedback of our products and services provided. 
• To analyse customers’ interests for setting marketing targets for all marketing activities.
• To work within the department budget to ensure cost-effective marketing plans for each proposal.
• To provide post event reports and analysis on marketing program to management team.
• To work with operations department to achieve goals and targets of the operations.
• Any other marketing functions as may be required by the management from time to time.

Perks & Benefits

• Personal leave
• Open culture
• Public holiday
• Medical Insurance
• Panel Clinic
• Salary is negotiable

Responsibilities :-

• Developing a design plan. blueprints and ID works Schedule.
• Communicating with senior designer to understand of the style
• Working with senior designer on projects on-hand with all details drawings ( multiple, revisions on 2D and 3 D drawings maybe require in accordance with the requirements of Feng Sui, Operation and Design)
• Working with senuior designeer to ensure all side works and work progress is accoiding to the intenal discussion
• Experience in AUTOCAD, 3D Max

Requirements :-

• 2 years and above experience in this field on commercial and residential prokects
• Fresh graduates are encouraged to apply

Perks & Benefits

• Personal leave
• Open culture
• Public holiday
• Medical Insurance
• Panel Clinic
• Salary is negotiable

Join Our Dynamic Team as a Sales Representative Extraordinaire!

Company Background:
We are a seasoned software development company, renowned for delivering innovative solutions for over a decade. Our SalesHero app is revolutionizing the wholesale industry, offering user-friendly features and unparalleled options. With our passion for technology and commitment to excellence, we're transforming businesses and changing lives.

Your Mission:
As our Sales Representative extraordinaire, you'll spearhead our sales revolution, driving business growth and exceeding targets while providing exceptional customer service.

What You'll Do:
- Build strong relationships with clients, both existing and potential.
- Stay updated on market trends and competitor activities to seize every opportunity.
- Master our products and services to meet customer needs effectively.
- Deliver captivating sales presentations to capture potential customers' interest.
- Develop and implement innovative sales strategies.
- Provide regular reports on sales activity, customer feedback, and market trends.
- Participate in top-notch conferences and events arranged by the company.

Qualifications:
- Diploma/Bachelor's degree in business, marketing, or related field.
- Minimum 1 year of sales experience.
- Excellent communication, negotiation, and interpersonal skills.
- Ability to work independently and in a team environment.
- Proficiency in Microsoft Office and CRM software.
- Experience in B2B sales preferred.
- Willingness to travel as necessary.
- Fluent in English, Malay, and Mandarin.

Working Location:
- Kedah & Penang: Office-based
- Johor, Selangor & Kuala Lumpur: Work from home
- Sabah & Sarawak: Work from home

Ready to turn your financial dreams into reality? Join our team today and become the master of your own financial destiny! Apply now!

Additional Benefits:
- Opportunity to earn a 5-figure income.
- High basic pay and attractive commission structure.
- Attractive high pay commission structure.
- Comfortable working environment.
- Great team support to help you succeed.

Plasmax Solution Sdn Bhd.

Our vision is to be the 1stop Solutions provider for plastic industries Appointed as Sole Agent for Chen Hsong world class Injection moulding machineries and automation manufacturer. As 3S Centre (Sales, Services, Spare Parts) to support our customer

Responsibilities:

• Develop new customer / new market
• Daily sales activity
• Maintain good business relationship with customers
• Plan and manage sales activities to meet sales targets
• Covers sales & business development for plastics machinery, robotic, auxiliaries & injection molding

Requirements:

• Certificate / Diploma in any field
• 0 - 3 Years Experience
• Fluent in English & Mandarin (need to liaise with China), is an added advantage for Cantonese & Hokkien
• Good PR, aggressive & self-driven
• Ability to work independently as well as in a team environment
• Fresh graduates are encouraged to apply
• Experience in Plastics industries is an added advantage
• Posses own transport
• EPF, Socso, EIS

Perks & Benefits

• Commission and bonus
• Central location

We are based at:

1. Kampung Baru Subang, Shah Alam (HQ)
2. Seberang Jaya, Penang (Branch)

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Roles and Responsibilities

• Maintain and build close relationships with existing and new customers by spending extra time prospecting, developing, and generating client referrals.
• Assist the Account Manager to deal register, negotiate better prices and draft project quotations, in order to surpass the sales target every quarter.
• Make outbound follow-up calls to existing clients via phone call and email.
• Handle inbound, unsolicited prospect calls and convert them into potential sales by understanding the needs and wants.
• Follow up closely on all opportunities quoted to customers by utilizing the ERP system feature to track and trace the quotation history.
• Emphasize product and service features and benefits to customers including cross-selling and upselling relevant IT solutions/products.
• Support marketing efforts to organize and execute the events which help to promote the company branding and build strong networking relationships.
• Effective time management including ensuring goods and services has been delivered on time and completing the report required.
• Develop possible problem solution paths, and take the appropriate course of action when facing issues.
• Update the License Renewal Report so that licenses that are going to expire will be aware and renewed.
• Attend periodic sales training where applicable.

Requirements

• Knowledge of IT industry and solutions - hardware, software and services is an added advantage
• Have experience or deep interest in Sales/Telesales
• Strong interpersonal and communication skills
• Candidate must possess at least Diploma in Computer Science/Information Technology, Mass Communications, Marketing, Business Admin or equivalent.

Perks & Benefits

• Incentive and commission
• Performance bonus
• Profit sharing on half-yearly basis
• Flexible benefits up to RM1500 per year
• Medical card and claimable outpatient/ clinic expenses
• Opportunity for career advancement

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan,
• Network Monitoring Systems (NMS), access points, firewalls, cyber security,
• Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma,
• Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

BIM Modeler

Job Responsibilities:

• Develop detailed BIM models using Revit for architectural, structural, and MEP disciplines.
• Collaborate with architects, engineers, and project managers to understand project requirements and objectives.
• Ensure models are accurate, up-to-date, and comply with project standards and specifications.
• Perform clash detection and resolve conflicts in coordination with other disciplines.
• Generate 2D drawings, schedules, and reports from BIM models as required.
• Assist in the coordination and integration of BIM with other project management and design software.
• Participate in BIM coordination meetings and provide input to project planning and execution.
• Maintain organized project files and documentation.
• Stay updated with the latest BIM technologies, tools, and best practices.

Job Requirements:

• Minimum 1 year experience in relevant fields.
• Experience working in construction line will be on advantage
• Good communication & correspondence skills
• Proficiency in Microsoft office
• Proficiency in using AUTOCAD software
• Meticulous and Organized
• Energetic and positive-minded individual

• Allowance (travel stipends, transportation, etc.)
• Personal leave
• Personal development opportunities
• KWSP & SOCSO
• Medical Insurance
• Company trips

Responsibilities:

- To manage daily delivery schedule and deadline.
- To support production planner on production scheduling.
- To handle and support sales team on customers requirement.
- To carry out the general duty of Admin Executive.
- Report to Admin Manager.

Requirements:

- Experience as Admin Executive.

Benefits:

- Good career prospects
- Good opportunities to learn new work skill
- Opportunity to participate holding company share option scheme
- Bonus for confirm employee
- EPF/SOCSO

Responsibilities:

• Generating leads.
• Meeting or exceeding sales goals.
• Negotiating all contracts with prospective clients.
• Helping determine pricing schedules for quotes, promotions, and negotiations.
• Preparing weekly and monthly reports.
• Giving sales presentations to a range of prospective clients.
• Coordinating sales efforts with marketing programs.
• Understanding and promoting company products
• Visiting clients and potential clients to evaluate needs or promote products and services.
• Maintaining client records.
• Answering client questions about credit terms, products, prices, and availability.

Requirements:

• Candidate must possess at least SPM level
• Working experience in related field (construction industry) is an added advantage
• Required skills: Microsoft Office
• Responsible & willing to learn

Benefits:

• Car Allowance - RM500
• Petrol Allowance - RM500
• Commission - Subject to sales performance (Average RM5000 - 6000/month)
• Good career prospects
• Good opportunities to learn new work skill
• Opportunity to participate holding company share option scheme
• Bonus for confirm employee