Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Responsibilities:

• Source suppliers, request and evaluate quotations, and negotiate pricing and terms.
• Prepare and issue purchase orders (POs) based on internal requests and demand forecasts.
• Track order status, shipment progress, and ensure on-time delivery.
• Maintain accurate purchasing and inventory records in SQL Accounting System.
• Evaluate supplier performance and assist in qualification processes.
• Coordinate import/export documentation ( Form E, packing list, invoice, CoO).
• Support cost-saving initiatives and identify areas for procurement improvement.
• Communicate with internal departments to understand material requirements and lead times.

Requirements:

• Proven experience as a buyer or relevant role.
• Exceptional communication abilities.
• Outstanding organizational skills.
• Demonstrable aptitude in effective negotiating.
• Up to speed with purchasing best practices.
• •Ability to multitask and work in a fast-paced environment.
• Familiarity with market research, data analysis and forecasting techniques.
• Good understanding of Incoterms, international shipping processes, and supplier communication.
• Familiar with SQL Accounting or similar ERP/purchasing software.
• Good knowledge of MS Office; working knowledge of purchasing software (e.g. SpendMap) is an advantage.
• Possess at least a Bachelor's Degree in Business Administration or relevant field will be considered a plus.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Pentrac Itron is seeking a conscientious Electronic & Electrical Technician that will be in charge of performing standard calibration processes on a variety of specialized equipment and responsible for recording and analyzing the results. 

The main role of the Electronic & Electrical Technician is to troubleshoot, problem solve and provide technical information to allow informed decision-making. The role will involve assisting technical teams with recommendations to resolve laboratory problems, roadblocks or equipment malfunctions that impact the performance or validity of testing. 

Job Duties:

• Calibration of equipment, including troubleshooting, problem isolation & provide technical information for customer to make decision wisely.
• Maintenance of the various calibration equipment and platforms.
• Manage record retention for all Calibration Lab operations as needed.
• Identify non-conforming works related to calibration and report to Manager.
• Cal factors data entry.
• Compile reports for customer notification or problem resolution.
• Perform safety tests on equipment.

Perks & Benefits

• 13th Month Bonus
• Allowance (transportation, meal etc.)
• Central location
• Casual dress code
• Medical insurance
• Personal leave
• Performance Incentive

Key Responsibilities

• Develop, evaluate, and improve manufacturing processes to increase productivity and efficiency.
• Analyze production processes to identify areas for improvement, cost reduction, and waste minimization.
• Troubleshoot production issues and implement corrective actions to prevent recurring problems.
• Work closely with production, quality, and maintenance teams to ensure smooth manufacturing operations.
• Prepare and update process documentation including work instructions, SOPs, and process flow diagrams.
• Monitor process performance and implement process control measures.
• Conduct root cause analysis for process-related problems and implement preventive actions.
• Support new product introduction (NPI) by developing appropriate production processes and parameters.
• Ensure manufacturing processes comply with company quality standards and safety requirements.
• Lead continuous improvement initiatives such as Lean Manufacturing, Kaizen, or Six Sigma projects.

Skills and Competencies

• Strong analytical and problem-solving skills.
• Knowledge of manufacturing processes and production systems.
• Ability to perform root cause analysis and process improvement.
• Familiar with quality management systems (ISO 9001).
• Knowledge of Lean Manufacturing / Six Sigma is an advantage.
• Good communication and teamwork skills.

Tanggungjawab Utama

• Membangun, menilai dan menambah baik proses pembuatan untuk meningkatkan produktiviti dan kecekapan.
• Menganalisis proses pengeluaran untuk mengenal pasti bidang untuk penambahbaikan, pengurangan kos dan pengurangan sisa.
• Menyelesaikan masalah pengeluaran dan melaksanakan tindakan pembetulan untuk mencegah masalah berulang.
• Bekerjasama rapat dengan pasukan pengeluaran, kualiti dan penyelenggaraan untuk memastikan operasi pembuatan yang lancar.
• Menyediakan dan mengemas kini dokumentasi proses termasuk arahan kerja, SOP dan gambarajah aliran proses.
• Memantau prestasi proses dan melaksanakan langkah-langkah kawalan proses.
• Menjalankan analisis punca utama untuk masalah berkaitan proses dan melaksanakan tindakan pencegahan.
• Menyokong pengenalan produk baharu (NPI) dengan membangunkan proses dan parameter pengeluaran yang sesuai.
• Memastikan proses pembuatan mematuhi piawaian kualiti dan keperluan keselamatan syarikat.
• Menerajui inisiatif penambahbaikan berterusan seperti projek Lean Manufacturing, Kaizen atau Six Sigma.

Kemahiran dan Kecekapan

• Kemahiran analitikal dan penyelesaian masalah yang kuat.
• Pengetahuan tentang proses pembuatan dan sistem pengeluaran.
• Kebolehan untuk menjalankan analisis punca masalah dan penambahbaikan proses.
• Mahir dengan sistem pengurusan kualiti (ISO 9001).
• Pengetahuan tentang Lean Manufacturing / Six Sigma adalah satu kelebihan.
• Kemahiran komunikasi dan kerja berpasukan yang baik.

主要職責

• 開發、評估和改進製造工藝，以提高生產率和效率。
• 分析生產流程，找出需要改進、降低成本、減少浪費的領域。
• 排查生產問題並採取糾正措施，以防止問題再次發生。
• 與生產、品質和維護團隊緊密合作，確保生產運作順利進行。
• 準備和更新製程文件，包括工作指導書、標準作業規程和製程流程圖。
• 監控製程效能並實施製程控制措施。
• 對流程相關問題進行根本原因分析，並實施預防措施。
• 透過開發合適的生產流程和參數，支援新產品導入（NPI）。
• 確保生產流程符合公司品質標準和安全要求。
• 領導持續改善計劃，例如精益生產、改善或六西格瑪專案。

技能和能力

• 較強的分析和解決問題的能力。
• 具備製造流程和生產系統的知識。
• 具備進行根本原因分析和流程改善的能力。
• 熟悉品質管理系統（ISO 9001）。
• 具備精實生產/六西格瑪知識者優先考慮。
• 良好的溝通和團隊合作能力。

A. Position Objective

The Girder Launching Engineer is responsible for overseeing the technical planning and on-site execution of segmental box girder (SBG) erection. This role ensures that all launching activities are conducted safely, on schedule, and in strict adherence to engineering specifications and quality standards.

B. Job Responsibilities

• Method Statement & Planning: Compile and refine comprehensive construction schemes and method statements for full framing support and girder launching sequences.
• Technical Drawing: Prepare and review detailed construction drawings, including traffic diversion plans (TDP), launching gantry positions, and temporary works.
• Quality Control: Strictly monitor and control the construction quality related to segmental box girder (SBG) erection, ensuring precise alignment, leveling, and structural integrity.
• Documentation: Compile, maintain, and submit internal engineering documents, site diaries, inspection records (RFI), and progress reports.
• Site Supervision: Supervise the launching crew and subcontractors to ensure compliance with safety protocols and technical requirements.
• Ad-hoc Duties: Undertake other assigned tasks related to bridge/viaduct construction and girder erection as directed by the Project Manager.

C. Job Requirements

• Minimum 3–5 years of site experience specifically in Segmental Box Girder (SBG) erection.
• Candidates with proven experience in LRT, MRT, or major Highway viaduct projects will be given top priority.
• Must be proficient in English, and Malay to facilitate communication between stakeholders, site workers, and management. Proficiency in Chinese is an added advantage.
• Highly skilled in AutoCAD for construction drawings and Microsoft Office for reporting.
• Excellent communication and coordination abilities, with a problem-solving mindset for site-specific challenges.
• Diploma or Bachelor’s Degree in Civil Engineering or a related field.

Perks & Benefits

• Allowance (Mobile, Computer, Transportation, Meals, etc.)
• Medical insurance
• Open culture
• Paid training and development

Role Overview:

We are looking for an experienced Senior Site Quantity Surveyor who is capable of managing the full spectrum of QS functions independently. This role requires a high level of autonomy, as you will be responsible for the entire submission process and contractual management at the site level.

Key Responsibilities:

• Full-Set Submissions: Manage the complete cycle of documentation, including progress claims, Variation Orders (VO), and Final Accounts.
• Contractual Claims: Independently prepare and submit Extension of Time (EOT), Loss and Expense (L&E) claims, and other contractual justifications.
• Independent Management: Take full ownership of all site-related commercial documents without requiring close supervision.
• Liaison: Act as the sole commercial representative for the company in all dealings with the Main Contractor and Consultants regarding site measurements, valuations, and site records.
• Cost Control: Monitor and analyze project costs, ensuring all submissions are accurate and submitted within the contractual deadlines.

Requirements:

• Candidate must possess a Diploma or Degree in Quantity Surveying or equivalent.
• Minimum 5 years of experience in Site QS roles (Infrastructure/Civil works preferred).
• Proven knowledge and experience in full-set submission documents.
• Must have practical experience in drafting and submitting EOT and contractual letters.
• Ability to work individually and lead the site’s commercial function effectively.
• Strong negotiation skills and deep understanding of construction law/contract forms.

Perks & Benefits

• Allowance (Mobile, Computer, Transportation, Meals, etc.)
• Medical insurance
• Open culture
• Paid training and development

A. Objektif Jawatan

Jurutera Pelancaran Girder bertanggungjawab menyelia perancangan teknikal dan pelaksanaan di tapak pembinaan girder kotak segmental (SBG). Peranan ini memastikan semua aktiviti pelancaran dijalankan dengan selamat, mengikut jadual dan mematuhi spesifikasi kejuruteraan dan piawaian kualiti dengan ketat.

B. Tanggungjawab Kerja

• Pernyataan & Perancangan Kaedah: Menyusun dan memperhalusi skim pembinaan yang komprehensif dan pernyataan kaedah untuk sokongan rangka penuh dan urutan pelancaran girder.
• Lukisan Teknikal: Sediakan dan semak lukisan pembinaan terperinci, termasuk pelan lencongan trafik (TDP), kedudukan gantri pelancaran dan kerja-kerja sementara.
• Kawalan Kualiti: Pantau dan kawal kualiti pembinaan yang berkaitan dengan pembinaan galang kotak bersegmen (SBG) dengan ketat, memastikan penjajaran, perataan dan integriti struktur yang tepat.
• Dokumentasi: Menyusun, menyelenggara dan menyerahkan dokumen kejuruteraan dalaman, diari tapak, rekod pemeriksaan (RFI) dan laporan kemajuan.
• Penyeliaan Tapak: Menyelia kru pelancar dan subkontraktor untuk memastikan pematuhan terhadap protokol keselamatan dan keperluan teknikal.
• Tugas Ad-hoc: Menjalankan tugas-tugas lain yang berkaitan dengan pembinaan jambatan/jejambat dan pemasangan girder seperti yang diarahkan oleh Pengurus Projek.

C. Keperluan Kerja

• Minimum 3–5 tahun pengalaman di tapak khususnya dalam pembinaan Segmental Box Girder (SBG).
• Calon yang mempunyai pengalaman terbukti dalam projek LRT, MRT atau jejambat lebuh raya utama akan diberi keutamaan.
• Mesti mahir berbahasa Inggeris dan Melayu untuk memudahkan komunikasi antara pihak berkepentingan, pekerja tapak dan pihak pengurusan. Kemahiran berbahasa Cina adalah satu kelebihan tambahan.
• Berkemahiran tinggi dalam AutoCAD untuk lukisan pembinaan dan Microsoft Office untuk pelaporan.
• Kebolehan komunikasi dan koordinasi yang sangat baik, dengan pemikiran penyelesaian masalah untuk cabaran khusus tapak.
• Diploma atau Ijazah Sarjana Muda dalam Kejuruteraan Awam atau bidang berkaitan.

Faedah & Kebaikan

• Elaun (Bimbit, Komputer, Pengangkutan, Makanan, dll.)
• Insurans perubatan
• Budaya terbuka
• Latihan dan pembangunan berbayar

A. 定位目標

樑架設工程師負責監督節段箱樑（SBG）架設的技術規劃和現場施工。此職位確保所有架設作業安全、按時完成，並嚴格遵守工程規範和品質標準。

B. 工作職責

• 方法說明和規劃：編制和完善全面的施工方案和方法說明，以實現完整的框架支撐和樑架設順序。
• 技術繪圖：準備和審查詳細的施工圖紙，包括交通改道計畫（TDP）、架設龍門架位置和臨時工程。
• 品質控制：嚴格監控和控制節段箱樑（SBG）安裝相關的施工質量，確保精確的對齊、水平和結構完整性。
• 文件編制：編制、維護和提交內部工程文件、現場日誌、檢查記錄（RFI）和進度報告。
• 現場監督：監督發射人員和分包商，確保遵守安全法規和技術要求。
• 臨時性任務：根據專案經理的指示，承擔與橋樑/高架橋施工和樑架設相關的其他分配任務。

C. 工作要求

• 至少 3-5 年現場經驗，尤其是在節段箱樑 (SBG) 架設方面。
• 具有輕軌、地鐵或大型高速公路高架橋專案經驗的候選人將優先考慮。
• 必須精通英語和馬來語，以便與利害關係人、現場工作人員和管理層進行溝通。精通中文者優先考慮。
• 精通 AutoCAD（用於建築繪圖）和 Microsoft Office（用於報告撰寫）。
• 具備優秀的溝通和協調能力，並能針對具體現場挑戰提出問題並解決問題。
• 土木工程或相關領域的文憑或學士學位。

福利待遇

• 津貼（手機、電腦、交通、餐費等）
• 醫療保險
• 開放文化
• 有薪培訓和發展

Gambaran Keseluruhan Peranan:

Kami sedang mencari Juruukur Bahan Tapak Kanan yang berpengalaman yang mampu menguruskan spektrum penuh fungsi QS secara bebas. Peranan ini memerlukan tahap autonomi yang tinggi, kerana anda akan bertanggungjawab untuk keseluruhan proses penyerahan dan pengurusan kontrak di peringkat tapak.

Tanggungjawab Utama:

• Penyerahan Set Lengkap: Urus kitaran dokumentasi yang lengkap, termasuk tuntutan kemajuan, Arahan Perubahan (VO) dan Akaun Akhir.
• Tuntutan Kontrak: Menyediakan dan mengemukakan tuntutan Lanjutan Masa (EOT), Kerugian dan Perbelanjaan (L&E) dan justifikasi kontrak yang lain secara bebas.
• Pengurusan Bebas: Mengambil alih sepenuhnya semua dokumen komersial berkaitan tapak tanpa memerlukan penyeliaan rapi.
• Perhubungan: Bertindak sebagai wakil komersial tunggal bagi syarikat dalam semua urusan dengan Kontraktor Utama dan Perunding mengenai pengukuran tapak, penilaian dan rekod tapak.
• Kawalan Kos: Pantau dan analisis kos projek, memastikan semua penyerahan adalah tepat dan dihantar dalam tempoh akhir kontrak.

Keperluan:

• Calon mesti memiliki Diploma atau Ijazah dalam Ukur Bahan atau yang setaraf.
• Minimum 5 tahun pengalaman dalam peranan Site QS (Infrastruktur/Kerja-kerja awam diutamakan).
• Pengetahuan dan pengalaman yang terbukti dalam dokumen penyerahan set lengkap.
• Mesti mempunyai pengalaman praktikal dalam merangka dan menyerahkan EOT dan surat kontrak.
• Kebolehan bekerja secara individu dan memimpin fungsi komersial tapak dengan berkesan.
• Kemahiran rundingan yang kukuh dan pemahaman yang mendalam tentang undang-undang pembinaan/borang kontrak.

Faedah & Kebaikan

• Elaun (Bimbit, Komputer, Pengangkutan, Makanan, dll.)
• Insurans perubatan
• Budaya terbuka
• Latihan dan pembangunan berbayar

職位概述：

我們正在尋找一位經驗豐富的資深現場工料測量師，能夠獨立管理工料測量的各項職能。該職位需要高度的自主性，因為您將負責整個專案提交流程以及現場的合約管理。

主要職責：

• 全套提交：管理完整的文件週期，包括進度款申請、變更單 (VO) 和最終結算。
• 合約索賠：獨立準備和提交延期（EOT）、損失和費用（L&E）索賠以及其他合約理由。
• 獨立管理：完全負責所有與網站相關的商業文件，無需密切監督。
• 聯絡：作為公司的唯一商業代表，負責與總承包商和顧問就現場測量、估價和現場記錄等事宜進行所有交易。
• 成本控制：監控和分析專案成本，確保所有提交內容準確無誤，並在合約規定的期限內提交。

要求：

• 應徵者必須持有工程造價或相關專業的文憑或學位。
• 至少5年現場工程造價師工作經驗（基礎建設/土木工程經驗優先）。
• 具備全套申報文件的豐富知識與經驗。
• 必須具備起草和提交延期申請函和合約函件的實務經驗。
• 能夠獨立工作並有效領導網站的商業運作。
• 較強的談判技巧和對建築法律/合約形式的深刻理解。

福利待遇

• 津貼（手機、電腦、交通、餐費等）
• 醫療保險
• 開放文化
• 有薪培訓和發展

Dalam peranan ini, anda akan bertanggungjawab untuk:

• Melakukan servis berkaitan dengan Hygiene seperti penukaran alas kaki pelbagai saiz, menambah dan mengantikan tisu tandas, sabun basuh tangan, hand sanitizer, toilet sanitizer, pewangi udara dan sebagainya di premis-premis pelanggan kami.
• Mencari peluang untuk menambah pendapatan sampingan dengan mempromosikan perkhidmatan Syarikat dengan sebaik mungkin di bawah bimbingan Penyelia.
• Memberi sokongan kepada Penyelia dan pasukan dalam pelaksanaan tugas.
• Membina dan mengekalkan hubungan yang baik dengan pelanggan-pelanggan.
• Memberi laporan yang betul dan tepat pada masanya apabila diarahkan oleh Penyelia.
• Menyerahkan wang kutipan servis (jika ada) dengan kadar yang segera atau dalam masa dua (2) hari.
• Hadir dan melibatkan diri di dalam perjumpaan/taklimat/mesyuarat mingguan/bulanan yang diadakan oleh pengurusan cawangan anda.
• Tugas-tugas lain yang berkaitan dengan pekerjaan yang mungkin diberikan kepada anda dari semasa ke semasa.

SEMUA JANTINA DARI PELBAGAI BANGSA ADALAH DIGALAKKAN UNTUK MEMOHON JAWATAN INI

Calon yang ideal memiliki:

• Kelayakan pelajaran minimum tahap SPM dan harus dikemukakan semasa menghadiri temuduga.
• Warganegara Malaysia, berumur antara 21 hingga 35 tahun (36 tahun & keatas akan dipertimbangkan jika mempunyai pengalaman kerja di industri Hygiene/Pest Control.
• Mempunyai lesen B2, D & GDL yang sah/ dalam proses mengambil lesen GDL.
• Minat melakukan kerja servis dan kerja luar (outdoor).
• Menetap di kawasan berdekatan.
• Pengambilan pekerja asing bergantung kepada kelulusan pihak berkuasa tempatan dan tertakluk pada permohonan visa mereka sendiri.

Sangat Diingini Jika Anda:

• Mempunyai sifat ingin belajar. Pengalaman tidak diperlukan kerana latihan insentif akan disediakan.
• Berdisiplin dan mampu mematuhi semua polisi dan dasar Syarikat.
• Berupaya untuk berbahasa Melayu dan juga memahami bahasa Inggeris mudah (penulisan dan percakapan).
• Boleh menggunakan telefon pintar dan celik IT/teknologi.

Position Overview

Lead strategic sourcing initiatives for critical capital equipment across Western Digital's global manufacturing operations, driving cost optimization, supply continuity, and technology innovation in alignment with WD's operational excellence and business objectives.

Key Responsibilities

Strategic Sourcing Leadership

• Develop and execute comprehensive sourcing strategies for capital equipment portfolios (wafer fabrication, HDD/SSD manufacturing, test equipment) supporting $XXM+ annual spend • Lead cross-functional teams in supplier selection, negotiation, and contract execution for high-value capital investments • Drive Total Cost of Ownership (TCO) optimization through strategic supplier partnerships and innovative commercial models • Establish multi-year sourcing roadmaps aligned with WD's technology roadmap and capacity expansion plans

Supplier Relationship & Risk Management

• Build and maintain strategic partnerships with Tier-1 OEMs and equipment suppliers in semiconductor and storage industries • Implement robust supplier performance management systems tracking quality, delivery, technical support, and innovation • Develop supply continuity strategies and risk mitigation plans for critical single-source equipment • Lead supplier business reviews and drive continuous improvement initiatives

Commercial Excellence & Value Creation

• Negotiate complex multi-million-dollar capital equipment agreements, including pricing, payment terms, warranty, service, and IP considerations • Structure creative commercial arrangements (consignment, lease-to-own, performance-based contracts) to optimize cash flow • Drive standardization and commonality initiatives to leverage scale and reduce total cost • Identify and capture cost savings opportunities through value engineering, should-cost analysis, and competitive benchmarking

Cross-Functional Collaboration

• Partner with Engineering, Operations, Finance, and Legal teams on capital planning, equipment specifications, and investment justifications • Support new product introduction (NPI) and technology transitions with timely equipment procurement • Collaborate with Global Operations on supplier qualification, installation, and ramp activities • Interface with Export Control and Trade Compliance on regulated equipment sourcing

Team Leadership & Development

• Lead and mentor sourcing team members, fostering professional development and category expertise • Establish sourcing best practices, processes, and tools to drive efficiency and compliance • Champion digital procurement transformation and adoption of advanced analytics

Qualify, Assembly Sustenance and Process Improvements on Power QFN package and Cu Clip related thin die assembly processes.

Key Responsibilities

• Design package, develop processes to qualify PQFN (Power Quad Flat-No lead) packages for SPS (Smart Power Stage) products & its associated modules.
• Ramp up manufacturing volume and qualify required sources.
• Responsible for line sustaining. Improve assembly yield, capacity, quality and costs.
• Address internal and external customer feedback / issues collaborating with Test / Product Engineers, Quality & Operations organization.
• Manage Product Lifecycle Management documents to the latest status.
• Conduct change-management with suppliers to sustain / improve capacity and cost. 

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.
• Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal.
• Responsible to lead, supervise and coach/train process tech, include engineering specialist and characterize technicians. Responsible to train and share PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, include online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up include process characterize (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).

Others include FMEA.

• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules
• Responsible to assist in sputter yield related issues trouble shooting (common causes).
• Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order
• to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.
• Other supervisor assigned task
• Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization.
• Responsible for new product qualifications.  

The Program Manager will lead the technical and operational readiness for a new manufacturing facility, driving equipment installation, process setup, qualification, and production ramp. This role ensures the factory achieves safe, efficient, and high-quality output through strong cross-functional coordination and engineering leadership.

Key Responsibilities

1. Factory Start-Up & Ramp Execution
• Lead end-to-end engineering activities for new factory setup (facility readiness, equipment installation, and commissioning)
• Drive qualification processes  to ensure production readiness
• Establish and execute ramp plan to meet output, yield, and quality targets
• Identify and mitigate technical risks during start-up phase

2. Process & Equipment Engineering
• Define, develop, and optimize manufacturing processes
• Oversee equipment selection, installation, calibration, and validation
• Ensure process capability (CPK), cycle time, and efficiency targets are achieved
• Implement continuous improvement initiatives to enhance productivity and yield

3. Cross-Functional Coordination
• Act as primary engineering interface with Operations, Quality, Supply Chain, Facilities, and EHS
• Align timelines and deliverables across teams to meet ramp milestones
• Support supplier engagement and technical issue resolution

4. Team Leadership & Capability Building
• Build, lead, and develop a high-performing engineering team
• Define roles, responsibilities, and performance expectations
• Coach engineers on problem-solving, root cause analysis, and technical skills
• Foster a culture of ownership, accountability, and collaboration

5. Quality & Compliance
• Ensure compliance with internal standards and external regulations
• Drive root cause analysis and corrective/preventive actions (CAPA)
• Support audits and ensure documentation readiness

6. Safety & Risk Management
• Promote a strong safety culture and ensure adherence to EHS requirements
• Conduct risk assessments for new processes and equipment
• Ensure safe startup and operation of all systems

⸻

Key Deliverables / KPIs
• On-time factory readiness and successful production ramp
• Yield, throughput, and cycle time targets achieved
• Equipment uptime and process capability metrics
• Zero major safety incidents
• Team capability development and retention

Job Description

1. Job Summary

1.1 Responsible to ensure all equipment used in test center in good working condition.

1.2 Responsible to arrange daily planned job to test worker.

1.3 Responsible to brief test worker on any newly introduced test item or test method.

1.4 Responsible to prepare Test Material, Test Data Recording Sheet for each test.

1.5 Responsible to ensure test material fulfill test plan specification and control the usage.

1.6 Responsible to perform audit at test center and feedback any finding to superior promptly.

1.7 Responsible to perform product function check, internal inspection after test.

1.8 To perform failure analysis.

1.9 To generate and publish test report after completion of the test.

1.10 Specific task assigned by the superior, as and when necessary, to meet target or deadline.

2. Core Competencies

2.1 Able to use basic measuring equipment such as caliper, multimeter & etc.

2.2 Proficiency in spoken and written English and Bahasa Malaysia.

2.3 Basic computer literacy (e.g. Microsoft Excel and Word)

2.4 Good communication skills

3. Work Conditions

3.1 Able to work on shift

3.2 High inter and intra departmental interaction

3.3 Able to work under tight schedule

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

• Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
• Follow cleanroom protocols, safety regulations, and quality standards at all times.
• Participate in process improvement, cost reduction, yield enhancement projects & RPA.
• Comply with company policies, EHS requirements, and industry regulations
• Perform other duties as assigned to support manufacturing operations

• Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
• Follow cleanroom protocols, safety regulations, and quality standards at all times.
• Participate in process improvement, cost reduction, yield enhancement projects & RPA.
• Comply with company policies, EHS requirements, and industry regulations
• Perform other duties as assigned to support manufacturing operations

We are seeking a Process Engineer with a minimum of 2 years of hands-on experience in semiconductor back-end assembly processes, particularly die bonding and wire bonding. The successful candidate will be responsible for process setup, optimization, yield improvement, and troubleshooting to ensure stable and high-quality manufacturing performance.

The role requires strong technical understanding of back-end equipment, materials, and process interactions, as well as the ability to analyze data, drive continuous improvement, and support production operations.

Key Responsibilities

• Develop, optimize, and sustain die bond and wire bond processes to meet quality, yield, and reliability requirements
• Perform process troubleshooting and root cause analysis for yield loss, defects, and equipment issues
• Support new product introduction (NPI), process qualification, and transfer to mass production
• Establish and maintain process parameters, work instructions, and control plans
• Analyze process data using statistical methods (e.g. SPC, CPK, trend analysis)
• Collaborate with cross-functional teams including Production, Quality, Equipment, and R&D
• Drive continuous improvement activities for cost, yield, cycle time, and reliability 

About Us

As Southeast Asia’s #1 integrated logistics provider, Teleport is all about making logistics fast, affordable and reliable. 

Our mission? To move things across Southeast Asia better than anyone else. We’re focused on making next-day delivery a reality for all.

#TeamTeleport is guided by our values: Move with urgency — because time is crucial; Aim to pioneer — constantly innovating to stay ahead; Do it with intent — delivering with purpose and precision; and Keep it real — maintaining authenticity and transparency in all we do.

Learn more about Teleport here:  

SALARY RANGE : Basic Salary - RM2160 + Productivity Allowance - RM250

Key Responsibilities

• To monitor day to day operations at the aircraft and warehouse; prepare & update the daily operation report at the end of duty roster.
• To collectively Work with CTO to ensure the priority cargo are as followed for both export and import.
• Responsible for preparing the relevant documents i.e. AWB, Lot Label, Control Form etc for cargo acceptance process.
• Research customs requirements, and attach the necessary documentations during the declaration process
• Develop understanding on import/export laws while ensuring compliance with safety and regulatory requirements
• Liaise with officials in various agencies to ensure goods are cleared through customs / quarantine
• Help to coordinate for transportation, warehousing, storage etc. where necessary.

• Diploma or Bachelor’s degree in Logistics, Supply Chain, Aviation Management, or a related field.
• 1–3 years of experience in air cargo operations or airline capacity management preferred.
• Strong interpersonal skills - ability to speak Bahasa Malaysia and English fluently
• Able to operate computer programmes such as Microsoft office
• Working experience with standard data-entry software
• Meticulous with work - double checking for accuracy of data entry.
• Has experience engaging with Government Agencies
• Experience or knowledgeable in logistics

• Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
• Follow cleanroom protocols, safety regulations, and quality standards at all times.
• Participate in process improvement, cost reduction, yield enhancement projects & RPA.
• Comply with company policies, EHS requirements, and industry regulations
• Perform other duties as assigned to support manufacturing operations