Total 3,104 Engineering job vacancies

概述：

我們目前正在尋找經驗豐富的服務工程師/技術人員加入我們的團隊。作為服務工程師/技術員，您將負責為我們的客戶提供技術支援和服務。這包括準備書面服務和技術報告、向技術支援入口網站提交技術故障報告以及前往內視鏡檢查場所，包括在客戶現場進行安裝、故障/故障排除和服務。

主要責任：

• 準備書面服務和技術報告
• 向技術支援入口網站提交技術故障報告，跟進，完成後關閉案例
• 參與內視鏡檢查的現場工作，包括客戶的安裝、故障/故障排除和服務，包括系統應用程式、作業系統支援、應用程式支援、軟體支援、技術支援和故障排除。
• 每天與客戶溝通，以確保解決方案和適當的後續行動，從而達到可接受的客戶滿意度。

要求：

• 生物醫學、電機/電子工程或同等學歷的最低文憑或學位。
• 能夠及時為客戶提供技術解決方案
• 能夠走遍整個馬來西亞
• 必須擁有自己的汽車作為交通工具
• 願意靈活工作時間，包括晚上、週末和假日，以及支援 24/7 日程安排所需的緊急非工作時間
• 願意定期出差以支援業務需求。
• 良好的英語和馬來語能力
• 能夠與客戶進行有效的溝通

津貼和福利

• 高於標準的 EPF 雇主繳款
• 津貼（旅費、交通費等）
• 附近的公共交通工具（LRT Taman Jaya）
• 醫療和保險範圍
• 開放文化
• 個人發展機會
• 牙科保險
• 健身會員資格

Overview:

We are currently seeking an experienced Service Engineer/Technician to join our team. As a Service Engineer/Technician, you will be responsible for providing technical support and service to our customers. This includes preparing service and technical reports in writing, lodging technical breakdown reports to the Technical Support portal, and attending to premises for Endoscopy, including installation, breakdown/troubleshooting, and service at the customer's site.

Key Responsibilities:

• Prepare service and technical report in writing
• Lodge technical breakdown report to Technical Support portal, follow-up, and close the case upon completion
• Attend to premise for Endoscopy, including installation, breakdown/troubleshooting & service at customer’s inclusive of systems applications, operating system support, applications support, software support, technical support, and troubleshooting.
• Communicate daily with customers to ensure resolution and proper follow‐up leading to acceptable customer satisfaction levels.

Requirements:

• Minimum Diploma or Degree in Biomedical, Electrical/Electronic Engineering or equivalent.
• Able to provide technical solutions to customers in a timely manner
• Able to travel extensively throughout the whole of Malaysia
• Must have own car as transport
• Willing to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as required to support a 24/7 schedule
• Willing to travel periodically to support business needs.
• Good command of English and Bahasa Malaysia
• Able to communicate efficiently with customers

Perks & Benefits

• Above standard EPF Employer Contribution
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport (LRT Taman Jaya)
• Medical & Insurance coverage
• Open culture
• Personal development opportunities
• Dental insurance
• Fitness membership

JOB RESPONSIBILITIES :

• SOURCE FOR NEW PARTS, MATERIALS OR POTENTIAL SUPPLIERS WHEN THE NEED ARISES.
• RESPONSIBLE FOR ONGOING PURCHASING AND SOURCING ACTIVITIES THAT COULD GENERATE MORE COST SAVING FOR THE COMPANY.
• PREPARE MONTHLY REPORTS ON PURCHASES, INCLUDING COST ANALYSIS AND TRACK LEAD TIME FOR CRITICAL PARTS.
• CONTINUOUSLY MONITOR OPEN PURCHASE ORDER STATUS. REVIEW THE PART QUALITY, COST AND DELIVERY OF PURCHASED PRODUCTS.

PERKS & BENEFITS:

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Open culture

職責：

A. 工程設計、執行、監控、改進

• 與內部生產團隊和外部各方在產品設計和合規性方面密切合作。
• 如果需要，準備結構 2D 和 3D 繪圖設計和分析軟體測試。
• 準備工程文件供 JPJ 技術部門或任何其他政府機構批准。
• 對所有工程活動進行適當的歸檔和記錄。
• 不時維護和更新圖書館資料。
• 確保產品的品質。
• 協助準備生產材料。
• 履行管理層不時分配的其他職責。

B、報告

• 準備、維護和更新每日、每周和每月的任務清單。
• 研究、分析、比較和評估所需材料和資源的實際與預測。
• 透過審查材料消耗並根據產品設計、性能指標和不斷變化的條件進行必要的調整來促進持續改進。

要求：

• 至少擁有任何相關領域的文憑、學士學位。
• 至少1-2年相關工作經驗（汽車和工程行業將增加優勢）。
• 使用 ERP 軟體的經驗（附加優勢）。
• 具有指導和監督生產人員的經驗（附加優勢）。
• 所需語言：英語、馬來語。
• 所需技能：AutoCAD、Autodesk Inventor 2D 和 3D（框架設計）、模擬和分析測試資料以及 Microsoft Office 的基本技能。
• 高度的責任感。
• 良好的團隊合作、人際溝通和溝通能力。
• 能夠準備清晰、全面的技術文件。
• 高度關注識別缺陷和問題的細節。
• 高度投入-能夠加班以滿足生產計劃。
• 高度分析思維，具有出色的解決問題的能力和對細節的關注。
• 自我驅動－能夠在最少的監督下獨立工作。
• 以結果為導向－致力於正確、及時地完成工作。
• 願意學習。

津貼和福利

• 熟悉汽車產業，與SCANIA、VOLVO、MAN、宇通日野等國際品牌有業務往來。
• 年度績效獎金。
• 每年增量（基於工作績效和可交付成果）。
• 有競爭力的薪資。
• 有機會獲得晉升並享受額外福利。
• 在年輕而充滿活力的文化中工作。

Responsibilities:

A. Engineering Design, Execution, Monitor, Improvement

• Work closely with internal production team and external parties on product design and compliance.
• Prepare structural 2D and 3D drawing design and analytical software test if required.
• Prepare engineering documentations for JPJ Technical Department or any other government authority for approval. 
• Maintain proper filing and recording for all engineering activities.
• Maintain and update library data from time to time.
• Ensuring the quality of the products.
• Assist in preparing material to production.
• Perform other duties as assigned by management from time to time.

B. Reporting

• Prepare, maintain and update daily, weekly and montly tasks list.
• Study, analyze, compare and evaluate between actual and forecast of material and resource required.
• Foster continuous improvement by reviewing material consumption and make necessary adjustments in response to product design, performance metrics and changing conditions.

Requirements:

• Possess minimum Diploma, Bachelor's degree in any related field.
• Minimum 1-2 years related working experience (Automotive and Engineering Industry will be added advantage).
• Experience in using ERP software (Added advantage).
• Experience in directing and supervising production personnel (Added advantage).
• Languages required: English, Bahasa Malaysia.
• Skills required: Basic skills in AutoCAD, Autodesk Inventor 2D & 3D (frame design), simulations and analyze test data and Microsoft office.
• High sense of responsibility. 
• Good in teamwork, interpersonal and communication skill.
• Capable to prepare clear and comprehensive technical documentation.
• Sharp attention to details in identifying defects and problems.
• Highly committed-Able to work overtime to meet production schedules.
• Highly analytical mind, with exceptional problem-solving skills and attention to detail.
• Self-driven- Able to work independently with minimal supervision.
• Result-oriented- Commited to getting things done in proper and timely manner.
• Willing to learn.

Perks & Benefits

• Great exposure to automotive industry and dealing with international brands like SCANIA, VOLVO, MAN, YUTONG HINO.
• Annual perfomance bonus.
• Yearly increment (Based on work performance and deliverables).
• Competitive salary.
• Opportunity to be promoted with extra benefits.
• Work in young and vibrant culture.

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Mob Date: 18/04/2024

Demob date: 09/05/2024

Duration: 3 weeks

Location: PFLNG2

Mob From: Kota Kinabalu

Responsibilities:

• Set up WirelessHART communication for multiple instruments using AMS TREX.

• Connect wireless UT sensors to the caliperay and repeaters and configure them for data transmission.

• Ensure antenna is installed with the optimal signal reception.
• Establish cable connections between antennas and the Emerson Gateway.
• Integrate the Gateway with the WirelessHART network.
• Together with the execution team for the installation and troubleshooting
• Ensuring compliance with specifications, codes or requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Ensuring all activities necessary to guarantee the design of a 'safe' plant are performed.
• To assist in troubleshooting electrical equipment failures and recommend solutions to avoid recurring issues.
• Submission UAUC Report. ( 1 UAUC per day)

CRITERIA

• Local Sabahan / Valid Sabah work permit
• OGSP
• Medical Offshore
• Bosiet
• CIDB
• Full dose of vaccination c/w booster
• WAH
• Related Certificates

Perks & Benefits

• Employee equity
• Casual dress code
• Open culture
• Personal development opportunities

Job Description:

• To monitor project quality plan, work program and assist Project Manager in monitoring project cash flow and progressive claim preparation.
• Provide oversight in managing all necessary resources throughout the entire project from start-up through closeout and ensure that owner’s expectation is met.
• Plan, coordinate, supervise and monitor construction works at site & ensure site personnel following of company rules & regulations.
• Prepare quantity for variation order works and quotation.
• Ensure our installation, servicing and / or maintenance works are according to drawing contract specification and work schedule
• To attend site progress meeting, coordination meeting, safety meeting and site inspection
• To attend valuation of progress claim with client and / or consultants’ representative
• Ensure that the day-to-day operations of projects are transitioned effectively to
• Project Managers when work commences in the field.
• Adhere to quotation and tender management policies and practice in performing daily task.
• Obtain necessaries and update documents to ensure availability of documents (e.g: pricing & technical data) for tender submission
• Prepare quotations & proposed drawing as per client’s requirements and standard operating procedures.
• Responsible for on time delivery of all assigned tenders / quotation.
• Keep pricing and other information regarding quotation and tender confidential
• Adhere AUTOCAD drawing as per client requirements

Job Requirements:

• Candidate must possess at least Diploma or Bachelor's Degree in Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Required language(s): Bahasa Malaysia, English, Mandarin
• Required Skill(s): Microsoft Office, EXCEL, AUTOCAD, Microsoft Project, OUTLOOK
• Preferably Entry Level specialized in Engineering Construction/Structural or equivalent.
• Fresh Graduate are welcomed to apply!

• Allowance (travel stipends, transportation, etc.)
• Personal leave
• Personal development opportunities
• KWSP & SOCSO
• Medical Insurance
• Company trips

Job Responsibilities

• Prepare, coordinate, creation of specifications and assist in the preparation and submission of proposals/tenders for water and wastewater treatment system. 
• Prepare plant layout, P&ID, PFD drawings for proposal/tender submission.
• Prepare and assist in the preparation of cost estimations.
• Coordinate and liaise with vendor and sub-contractor on RFQ based on design requirements and tender specifications.
• Prepare and assist in report writing, technical write-ups, process plant descriptions, data sheets/document compilations for proposals/tender submissions.
• Perform jar-testing upon request (for proposal design, project or services requirement)
• Perform site visit/study on existing treatment system (requirement for site study before proposal submission or upon award of a study project)
• Perform process detail design, and assist in preparing control philosophy upon project awarded.
• Participate in tender briefing, review, and/or meeting with client.
• To assist the manager/assistant manager in doing technology research/piloting
• To assist in testing and commissioning of plant/project

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Medical insurance
• Personal leave
• Personal development opportunities
• Paid training and development
• Accommodation will be provided for successful outstation candidate

Job Requirements:

• A Bachelor’s or higher degree in OSH, Health, Safety, Engineering, Science or Diploma in OSH is a pre-requisite. 
• Have a good working knowledge of Risk Management elements (i.e. Environment, Health, Safety, Risk / Crisis Management and 5S). Certification (s) desirable.
• Registered and certified SHO with DOSH  (Green book holder). 
• Minimum 5 years experience in manufacturing industry: Experience in glove industry a plus. 
• Possess basic computer skills and knowledge in Microsoft Office (Microsoft Excel, Word, Power point).
• Possess good communication skills and able to work in a team environment.
• Able to plan S&H activity and perform execution. 
• Able to engage with local authority, customer's auditor in any related audits/inspection.

Job Responsibilities:

• To liaise with government agencies and representatives regarding inspections, investigation of incidents, industrial accident, notices of violation and provide technical support on legal issues pertaining to Health, Safety Risk Management and 5S. 
• To follow-up to assist in timely submission of all Health, Safety, Risk Management & 5S related  corporate reports. 
• To support implementation of policies, systems and procedures necessary to maintain legislative compliance, adhere to corporate standards, achieve periodic goals, and continuously move toward best practices.
• To provide advice to management on Health, Safety, Risk Management and 5S of matters in the incumbent’s area of responsibility that could impact the business. 
  To develop a proposed Health, Safety, Risk Management & 5S budget for the organization. 
• To conduct, assist or coordinate trainings programs to enhance Health, Safety, Risk Management & 5S awareness. 
• To conduct or assist in conducting Health, Safety, Risk Management, Social Compliance, Insurance and 5S audits within the facility to assess compliance with applicable regulations, corporate standards, policies and procedures.  
• To provide or contribute recommendations needed to  abate deficiencies or enhance the working environment. To oversee periodic updates to management on the implementation status of recommendations. 
• To provide direction and technical support to the organization to facilitate achievement of company-wide goals and strategies for Health, Safety, Risk  Management & 5S.
• To contribute and improve the overall Health, Safety, Risk Management & 5S culture within the organization by driving corporate initiatives, project and processes. 
• To conduct investigation on near-miss, dangerous occurrence, accident or fire occurrence. To provide the investigation report together with its CAPA to management. 
• To act as a secretary in the S&H Committee. To conduct the S&H meeting at least 1 (once) in every 3 month.
• To submit the yearly Notification of Accident, Dangerous Occurrences, Occupational Poisoning or Occupational Diseases (NANOOPOD) to JKKP Putrajaya every January 31.

Perks & Benefits

• Medical insurance
• Free Parking

Responsibilities

• Overall project management which includes but not limited to planning, implementation, execution and completion of sections of project to ensure successful completion of the project.
• Coordination of multi-disciplinary works within a project including handling project planning, budget and cost control, safety and quality system implementation.
• Provide feedback / presentation regarding project progress to senior management.
• Focus on the successful delivery of the project and manage all aspects of the construction programme
• Follow up with relevant authorities and consultants on approval of land matters, proposed layout, building plan, design proposals, tender documentation etc
• Lead and coordinate work amongst the project team

Requirements

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil/Construction/Structure/Architecture) or equivalent.
• At least 10 years work experience in interior design renovation field and computer literate
• Willingness and competency to perform as part of a tight-knit team.
• Excellent command of English & Bahasa Malaysia

Job location based in Penang, Malaysia. Candidate based in other state are welcome to apply!

WPG 馬來西亞正在招募一名現場應用工程師。

現場應用工程師 (FAE) 團隊的目標是提供第一線技術
對指定產品線的支援。與產品行銷密切合作，以實現指定負責人的設計獲勝目標和目標。與客戶的研發工程師互動，推廣委託人的產品和解決方案。

義務和責任：-

• 將委託人重點產品推廣給客戶群研發工程師
  設計輸入。
• 與銷售和行銷部門密切合作，以滿足指定人員的期望
  產品線，涉及設計引入和設計獲勝活動。
• 透過定期聯繫，了解客戶設計活動的最新動態
  顧客。
• 隨時了解與客戶產品相關的最新創新
  透過參加相關培訓、研討會和展覽來集中精力。
• 舉辦培訓/技術研討會以推廣校長的產品。
• 識別並培養潛在的新研發客戶。
• 支援現場銷售的技術諮詢、產品交叉參考和
  向校長反饋品質問題。
• 確定並開發適合本地市場的參考設計。
• 上述未指定的任何其他相關項目/職責將被分配
  時不時地被上級。

要求：-

• 電子工程文憑/學位或同等學歷。
• 至少 2-3 年研發/產品開發和/或現場應用工程經驗。
• 熟練 MS Powerpoint。
• 強大的電子（類比/數位）背景。
• 有效的溝通技巧、談判技巧和演示技巧。
• 願意出差。

WPG Malaysia is hiring a Field Applicantion Engineer.

Field Application Engineer (FAE) team’s objective is to provide first line technical 
support for the assigned product lines. Work closely with product marketing to meet assigned principals’ design win goals and objectives. Interact with customers’ R&D engineers to promote principals’ products and solutions. 

Duties and Responsibilities:- 

• Promote principals' focus products to the account base's R&D engineers for 
  design-in. 
• Work closely with sales and marketing, to fulfill expectations of the assigned 
  product lines, with regards to design-in and design-win activities. 
• Keep up to date on customer’s design activities, through regular contacts with 
  customers. 
• Keep abreast of the latest innovation of relevance to customers' product 
  focus, by attending relevant training, seminars and exhibitions. 
• Conduct training/technical seminars to promote principals' products. 
• Identify and cultivate potential new R&D accounts. 
• Support field sales on technical inquiries, product cross reference and 
  feedback quality issues to principals. 
• Identify and develop reference designs for the local market. 
• Any other related projects/duties which not indicated above will be assigned 
  by the superior from time to time. 

Requirements:- 

• Diploma / Degree in Electronic Engineering or equivalent. 
• Minimum 2-3 years R&D / Product Development and/or Field Applications engineering experience. 
• Proficiency in MS Powerpoint. 
• Strong electronic (Analog/Digital) background. 
• Effective communication skills, negotiation skills and presentation skills. 
• Willing to travel. 

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.