Total 1,817 production engineer job vacancies in Customer Service category in Islandwide

Responsibilities:

Primary activities will include setup, maintenance, troubleshoot, upgrade of testing equipment at customers' facilities.

Provide onsite warranty support.

Provide technical support on all technical aspects of equipment.

Prepare relevant reports on support activities/issues encountered.

Requirements:

Technical Diploma(preferably Mechanical/Mechatronics/Electrical/Electronics).

Good interpersonal/communication skills.

Shows initiative and can work independently.

Good troubleshooting, analytical and problem-solving skills.

Ability to work overtime at short notice.

Abie to travel to support local and regional sites (Asia Countries)

We offer a competitive, family friendly and flexible working arrangement & environment.

• Accurately capture service related information as determined by the scope of responsibility for creation of field service notifications and orders, through to completion.
• Provide accurate, factual reports to the team leader or technical support personnel to enable informed decisions and decide on actions to resolve product issues.
• Responsible for end to end pump servicing from installation, commissioning to after sales services.
• Provide onsite advise to customers on technical issues.
• Project, perform and deliver under pressure with tight deadlines when necessary.
• Responsible for performing Installation and commissioning activities.
• Appraise, troubleshoot, repair of vacuum pumps.
• Setting up workshop for repair of vacuum pumps.
• Provide front line support for key field service activities in line with customers’ requirements. Examples being basic fault finding, rectification and planned maintenance activities.

Job Requirements:

• 'O' level/ ITE/ Diploma with 1-2 years of hands-on experience in servicing major brand of Industrial and Semicon vacuum pump (wet and dry pump).
• Proficient /able to interpret technical drawings and documents.
• 5 day work week.
• Attractive Benefits.

Interested applicants, please email your resume to jobs@e-ployment.com.sg

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

Roles & Responsibilities:

• To troubleshoot Instrument, Field sensor & transmitters.

• To troubleshoot PLC system PLC program, hardware and wiring, troubleshooting system error

• To perform Testing & Commissioning of Instrument and control system.

• To modify graphics, PLC program for new upgrading or migration works.

• To discuss with vendors for best and cost effective solution for PLC panels and hardware.

• To fix the issues in a timeline given by clients.

• To Study existing Instrument, PLC and SCADA , and perform program modification and additional logic.

• Providing clients with technical support through phone

• To standby for shutdown works.

Requirements:

• Diploma or Bachelor's degree in electronic/mechatronic or control engineering, or a similar field.

• At least 1 to 3 year's experience as a PLC programmer or I&C Engineer. Fresh graduates are welcome to apply

• Electronic and Electrical engineering experience preferred.

• Knowledge of PLC

• knowledge of instrument and control

• Proficiency in Ladder Programming, Function Block, Structure Text

• Able to travel locally and oversea

Responsibilities:

• Able to perform daily service operation such as equipment start-up/commissioning, repair, troubleshooting and preventive maintenance involving in mechanical, electrical and instrumentation
• Standard range of equipment include compressors, CDA equipment and gas generation
• Monitor the field equipment’s yearly spares requirement & follow up with clients on spares replacement & maintenance recommendation
• Assist in the achievement of aftermarket sales budget set by the management annually
• To prepare service report, commission report and incident report
• Communicate with clients, factories and dealers relating to technical and service issues
• Support local clients mainly with some overseas travelling when necessary
• Any ad-hoc tasks assigned by superior

Requirements:

• Diploma in electrical/mechanical engineering is preferred. ITE graduates with relevant experiences in maintenance are welcome to apply
• At least 2-3 of job-related experience
• Class 3 driving license
• Experience involving electrical/mechanical troubleshooting
• Must possess strong analytical/problem solving skill and good report writing skill
• Possess hands-on working experience and relevant industrial work experience
• Team player with good interpersonal and communication skill
• With dynamic personality to work in a fast pace environment
• Must be independent

Job Summary

If you have a passion for water analyzer, flowmeter, and particle counter, join us as a Service Engineer and apply your skills!

We Offer:

- Cohesive Working Environment, Great Teamwork!

- Good Benefits and Career progression opportunities!

- Opportunities for Enhanced Learning!

Here are some of the BENEFITS:

- Comprehensive Group Insurance Coverage

- Dental and Optical Care reimbursement benefits

- Time Off, Birthday Leave & Vouchers, & etc.

- Target incentives

Job Description

• Servicing and maintenance of water analyzer, flowmeter, and particle counter.
• Troubleshooting of water analyzer, flowmeter, and particle counter.
• Commissioning of water analyzer, flowmeter, and particle counter.
• Station on-site for maintenance job and standby for after office hour activation technical support.
• Coordinate with customers to ensure committed service work scopes are executed without business interruption.
• Report generating on all service-related activities.
• Adhere to legal regulations and abide to the safety protocol of all customers and company. To ensure the safety of personnel, equipment, and property at all times.
• Maintain good relationships with customers to achieve positive customer satisfaction.
• Undertake ad-hoc tasks as and when assigned by Department Manager.
• Training will be provided.

Job Requirement

• Min. Nitec in Electrical/ Electronic Engineering discipline.
• Min. 1 year of experience in instrumentation and controls.
• Willingness to learn. Good working attitude.
• Good communication and interpersonal skills.
• Posses Class 3 driving license.

About the role

• The support specialist will be a techno functional support team member for the Enterprise Datawarehouse (EDW)
• He/she is responsible for ensuring system availability and timely deliverables for datamarts for various business unit like Finance, regulatory, Campaign.
• The support specialist, as the analyst expert within the IT team, will be the support staff who needs to closely co-ordinate and work with various team like Tech Infra, application services, solutioning, project and business units in the bank. He/she follows up to resolve issues reported by users and performs impact analysis related projects/enhancements that will impact the EDW.
  

Responsibilities & Requirements

• Responsible to provide BAU support for Enterprise Datawarehouse
• Responsible to provide operational support and ensure SLI of system availability, batch deliverables
• Respond on time to the queries raised by various business units
• Provide timely updates regarding production status and progress of issue resolution
• Fine tune applications and systems for high performance and higher volume throughput
• Conduct review of technical and functional solutions from enhancement/project team to ensure they conform to IT standards
• Perform impact analysis of enhancements/projects that will impact supported systems
• Identify the underlying problems, analyse the root causes, provide possible solutions/fixes, and respond to users within SLA
• Support relevant software/platform/database upgrade for the systems
• Work with delivery team for smooth transition from projects/enhancements to BAU Mode
• Incident, problem, and service outage management experience
• Participate in Disaster Recovery and Business Continuity exercises
• Able to support relevant software/platform/database upgrade for the systems
• Server Performance, capacity, utilization monitoring and Health monitoring
• Collaborate with diverse cross functional teams within IT and Business to Independently drive outcomes
• At least 3+ years of relevant experience in banking/financial services industry
• Experience with Teradata FSLDM and data mapping
• Hands-on technologist, strong in SQL, UNIX and Teradata tools and technologies
• Experience in designing high throughput fault tolerant data pipelines for Batch (ETL/ELT)
• Experience in GL Data reconciliation between systems, datamarts & report and Knowledge of the ledger balance reporting is an added advantage
• Experience in Performance Tuning on Teradata or other MPP data pipeline
• Hands On Experience within the Hadoop Tool Sets Hive, Hue, Spark, Kafka is a plus

Our client is looking for a IT Helpdesk Support Engineer. You will provide day-to-day technical support to end users.

• 5 years or more IT helpdesk / desktop support experience
• Troubleshoot and resolve end user application issues
• Maintain and monitor office network infrastructure
• IT security and antivirus tools
• First level troubleshooting and support for scheduled server backups
• Ensure the smooth running of computers, network devices and printers
• Handle asset management, maintain inventory and liaise with vendors
• Maintain and update technical support documentation
• System monitoring and reports.

Job Description

• Industry/ Organization Type: Manufacturing/Semi-conductor
• Position Title: Field Service Engineer
• Working Location: Kaki Bukit
• Working Hours: Monday – Friday, 8.30 am – 5 pm
• Salary Package: Up to $3000 + Transportation Allowance + VB
• Duration: Permanent

Key Responsibilities

• Conduct moderate to complex service assignments, diagnose, and repair equipment issues, and make necessary adjustments.
• Comprehend system parameters and interactions for process development and pursue extensive electronic-mechanical troubleshooting.
• Meet and exceed customer and company expectations for service support.
• Provide direct equipment support at customer fabrication sites.
• Document detailed technical reports following service assignments.
• Manage and utilize specific jigs during service operations.
• Collaborate with and assist senior engineers in advanced technical tasks.
• Handle the delivery of parts to customers on an ad-hoc basis.
• Execute service, installation, and troubleshooting for both local and international assignments.
• Maintain spare parts inventory and manage records using SAP B1 software.

APPLY NOW!!!

• Minimum NITEC in Electronics/Electrical/Microelectronics Engineering, or related.
• Cleanroom working experience will be highly advantageous.
• Experience in machine set-up/installation/modification/servicing/troubleshooting/repair.
• Proficient in Microsoft Office.
• Comfortable with standing by/working after working hours.
• Comfortable with travelling.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66267 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Key Responsibilities:

• Create a field service report and include relevant before and after repair images in it for the ultimate give a client report
• Able to read electrical drawings and carry out simple electrical fault troubleshooting system with little or no direction
• Help the workshop manager create a parts quotation so the buyer may buy spares to carry out maintenance and/or overhaul
• Hold daily Tool Box meetings and make sure that workplace health procedures and safety regulations are followed
• When required, mentor and oversee junior engineers.
• Execute additional tasks as needed by the workshop from time to time.
• MRO services, such as organising, identifying, diagnosing, and carrying out small and major repairs major OEM marine propulsion equipment overhaul
• Includes yard, basin and sea trials for the new gearbox's commissioning.

Requirements:

• Mechanical engineering training, ideally NITEC or above
• Five years or more of experience in the marine industry, specifically in propulsion
• Capable of troubleshooting propulsion-related equipment with little supervision
• It is essential to have the ability to travel abroad, even on short notice.
• Strong communication abilities in both written and spoken English

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Primary Purpose:

Provide 24 by 7 IT Support for client machines, operating system, and software for MediaCorp users in the areas of:

· PC preparation, deployment and setup for Windows OS and MAC OS

· Software installations

· Printers and mobile devices support for enterprise services

· Problem diagnosis and resolution on computers and Enterprise services

· Documentation of processes procedure and best practice for knowledge sharing

· Asset Management - enroll issued assets and update returned assets in the Asset system and ensure user acknowledgement of the issued asset.

· Vendor coordination for computer servicing and deliveries

· End user training for new hires and on implemented services

· Responsible to consolidate, maintain and streamline organization knowledge management systems and processes.

· Ensure compliance of endpoints on patch management system. Coordinate with internal team to handle endpoint patch management utilizing Microsoft Intune or IBM Bigfix.

· Facilitate the Video conferencing needs used in organization, seeking to improve and increase user satisfaction to deliver an excellent user experience.

Job Requirements:

· Experience in providing remote and onsite support to end users across an enterprise environment and escalate issues quickly when appropriate

· Able to interact with users to troubleshoot issues and possess strong problem-solving skills to resolve complex technical issues

· Able to provide end user training and coordinate with vendor on hardware related issues

· Able to work under pressure and have effective time management and planning skills

· A confident, positive and outgoing person with natural enthusiasm and the ability to be assertive when required.

· Display good communication skills, both verbal and written.

· Fulfill any additional tasks assigned by the supervisor.

Technical skillset required:

1. Hardware troubleshooting and support for Microsoft Windows Client OS (Windows 10/11) x64 and MAC OS is a must.

2. Possess technical knowledge and experience with Microsoft technologies (Active Directory including Azure AD, MS365, Intune Endpoint Management, MS Teams and Sharepoint) and MS security technologies (MS Defender and Bitlocker)

3. PC deployments & setup

4. Software installation, configuration, and troubleshooting

5. Printers and mobile device support

6. Networking Troubleshooting (added Advantage).

7. IBM Bigfix (or equivalent MS SCCM) knowledge and experience in Operating System Deployment (OSD) creation & troubleshooting and experience in application/software packaging, application patching, create and query is an added advantage.

8. Experience in BMC Remedy ITSM ticketing system is an added advantage.

9. Jamf Pro MAC endpoint management tool experience is a plus

10. Capability to read and write technical documentation.

Working hours: Day shift : 8:30am to 6pm

Night shift : 2:30pm to 12am - Engineer will be rostered on night shift duty for 2 weeks or 10 days per month.

Standby Support: Rostered during after office hours for 1week every 2months, from 12 midnight to 8am next working day, weekends & public holidays. Weekly rotation among 7 engineers.

Job Description

• Industry/ Organization Type: Manufacturing/Semi-conductor
• Position Title: Field Service Engineer
• Working Location: Kaki Bukit
• Working Hours: Monday – Friday, 8.30 am – 5 pm
• Salary Package: Up to $3000 + $500 Transportation Allowance + OT + Standby Allowance + VB
• Duration: Permanent

Key Responsibilities

• Install, service, support, upgrade, and maintain various types of equipment.
• Execute moderate to complex assignments including diagnosing and repairing equipment malfunctions and making necessary adjustments.
• Understand and apply knowledge of system parameters and interactions for process development and advanced electronic-mechanical troubleshooting.
• Collaborate with the team to achieve and maintain high levels of customer and company satisfaction.
• Offer direct, hands-on support for machinery at customer sites.
• Prepare and submit detailed technical reports post-service activities.
• Manage and use specific jigs effectively during service tasks.
• Assist senior engineers with advanced-level functions, like robot teaching and handling sub-units.
• Conduct ad-hoc delivery of equipment or parts as needed.

APPLY NOW!!!

• Minimum Diploma in Electronics/Electrical/Microelectronics Engineering, or related.
• Cleanroom working experience will be highly advantageous.
• Experience in machine set-up/installation/modification/servicing/troubleshooting/repair.
• Proficient in Microsoft Office.
• Comfortable with standing by/working after working hours.
• Comfortable with travelling occasionally.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66266 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job scope:

– Infrastructure support for MPLS and Enterprise network for critical systems (including system and security support)

- Daily Operation support and System administration at customer site

- Technical consultancy for system onboarding to the campus network

- After-office-hour Maintenance support and Standby

Experience:

- Minimum CCNP certification with at least 5 years of working experience in a large-scale enterprise MPLS network environment

- In-depth and extensive hands-on experience on network deployment and troubleshooting

- Hands-on experience on Servers or Security devices administration and support

- Preferable to have technical knowledge with multi-domain skillsets

Job Description

• Industry/ Organization Type: Safety Tech MNC
• Position Title: Service Engineer (Marine)
• Working Location: North-East – Ang Mo Kio
• Working Hours: 5 days (Mon to Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD 3500 + AWS+ Performance Bonus + Mobile Allowance and Transport Allowance
• Duration: Permanent

Key Responsibilities

• Inspecting safety equipment (e.g. Fire Detection System, Gas Detection System)
• Resolving onsite malfunctions
• Rectification of safety systems
• Repairs and technical improvements
• Installation and commissioning of new systems
• Ensure proper maintenance of onsite equipment

APPLY NOW!!!

• ITE in Electrical or Electronics
• Min. 1 year of working experience in a hands-on job
• Experience as a field engineer or similar role in a Marine background is a plus
• Comfortable with travelling out of Singapore for work
• Able to work in adverse weather and overtime and weekends
• Willing to be assigned onboard ships at anchor, in shipyards, or abroad, should the job require it
• Training provided to an inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66085 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Provide regular scheduled and ad hoc support for IT infrastructure and user desktop applications.
• Troubleshoot, monitor & report on critical problems to the client, Team Lead or Service Delivery Manager until they are resolved.
• Maintain and troubleshoot internal IT infrastructure including PC procurement and setup
• Utilize technical and communication skills to resolve onsite trouble tickets and end user support issues in an efficient manner and with a focus on customer service.
• Support and participate other ad-hoc Company’s initiatives, assignments and projects.

Qualifications

• Diploma/Degree in Computer Science/Information Technology preferred
• At least 3 years of experience in IT helpdesk/ticketing system or technical support role, supporting MNC preferred. Some experience in networking setup and support is a definite advantage
• Pro-active, customer focused, and comfortable dealing with end users directly
• Good communication and inter-personal skills, able to describe issues clearly to end users and client management, and report on results effectively
• Comfortable working in a team or individually
• Proficiency in English
• Immediate availability will be an advantage

Computer Skills

• Client system Microsoft certification
• Windows 7/8/10 MCP/MCITP, MCTS/MCDST, MCSA/MCSE highly desirable
• Office 365 environment
• VC support experience on Cisco WebEx / Zooms Polycom etc
• Windows Server experience
• Working knowledge of Microsoft service (AD, DNS, DHCP, WSUS, GPO)
• Networking experience (checkpoint firewall and HP switches is a plus)
• VDI

About systemsGo
systemsGo is an established and respected AV & IT Consulting, IT Services and AV & IT Project Management company founded in 1998. We mainly work with multi-national companies as their preferred technology and IT project management partner to help them establish and/or expand their business operations in key Asia locations.
We have offices in Australia, Greater China, Japan, India and Singapore, and delivery capabilities across other key Asia cities such as Seoul, KL, Hyderabad, Macau, Bangkok and Melbourne. Whilst your role will be based in Tokyo, your client base will reach across the entire Asia / APAC region.