Total 5,014 process development engineer job vacancies in D05 Clementi New Town, Hong Leong Garden, Pasir Panjang

Responsibilities

• Manage and drive the product development processes within planning section to ensure timely completion of design development and within budget.   
• Ensure all designs pertaining to building architectural, ID, landscape and any others that affect the aesthetic aspect of overall project are consistent and aligned.
• Establish in house planning guideline for quality design control.
• To evaluate and study new potential land by churning out the product mix and massing studies.
• To prepare feasibility study for all the new potential land.
• Research and explore latest design trends.
• Work with marketing team to understand market trends and product expectations.
• Explore product composition to optimize product marketability and financial returns.
• Set design direction for the project to consultants, i.e. architects, engineers, IDs, landscape architects, etc.
• Establish a pool of competent consultants, i.e. architects, engineers, IDs, landscape architects, etc.
• Initiate workshop with architects and matrix team to improve design efficiency, enhance product unique selling point, and eliminate unnecessary cost.
• Conduct audit to site to ensure design intends are intact.
• Ensure high accuracy of design detailing to avoid error and abortive cost.
• Ensure timely project approval and launching.
• Any other duties as assigned by the Management from time to time as deemed necessary.

Requirements

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Town Planning / HBP/ Architectural / Engineering or equivalent.
• At least 5 Year(s) of working experience in the related field is required for this position.
• Preferably Manager specialized in Property/Real Estate or equivalent.
• Strategic and demonstrate a high level of business sense.
• Dependable, excellent time management skills and prioritization with proven record in lead time management and ability to work under pressure meeting deadlines.

Perks & Benefits

• Employee equity
• Regular team activities
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities

職責

• 在規劃部門管理和推動產品開發流程，以確保在預算範圍內及時完成設計開發。
• 確保與建築、ID、景觀以及影響整個專案美觀的任何其他相關的所有設計都是一致且一致的。
• 建立品質設計控制的內部規劃指南。
• 透過制定產品組合和體量研究來評估和研究新的潛在土地。
• 為所有新的潛在土地準備可行性研究。
• 研究和探索最新的設計趨勢。
• 與行銷團隊合作，了解市場趨勢和產品期望。
• 探索產品組合以優化產品適銷性和財務回報。
• 向顧問（即建築師、工程師、ID、景觀設計師等）設定專案的設計方向。
• 建立一個有能力的顧問庫，即建築師、工程師、ID、景觀設計師等。
• 與建築師和矩陣團隊發起研討會，提高設計效率，增強產品獨特賣點，消除不必要的成本。
• 對現場進行審核以確保設計意圖完好無損。
• 確保設計細節的高精度，以避免錯誤和失敗的成本。
• 確保專案及時批准和啟動。
• 管理層不時指派的任何其他認為必要的職責。

要求

• 候選人必須至少擁有城市規劃/HBP/建築/工程學士學位/研究生文憑/專業學位或同等學歷。
• 該職位需要至少 5 年相關領域的工作經驗。
• 最好是房地產/房地產或同等專業的經理。
• 具有策略性並表現出高水準的商業意識。
• 可靠、出色的時間管理技能和優先順序，在交付時間管理方面擁有良好的記錄，並且能夠在按時完成任務的壓力下工作。

津貼和福利

• 員工股權
• 定期團隊活動
• 醫療保險
• 事假
• 開放文化
• 個人發展機會

Business Development Executive (Aesthetic Clinic) 

Location: Georgetown, Penang

Main Duties:

• To identify and develop target corporate clientele
• Need to know market strategy approach and promote medical service and facilities of company
• Engage with client in order to promote services provided by company
• Knowledge of recruit new direct panel company
• Organise and administer external marketing activities including corporate events and community services
• Build strong relationship with client and maintain solid association with client

Perks & Benefits

• Regular team activities
• Personal leave
• Personal development opportunities

業務發展主管（美容診所）

地點：雪蘭莪州蒲種

主要職責：

• 識別並開發目標企業客戶
• 需要了解市場策略方針並推廣公司的醫療服務和設施
• 與客戶互動以推廣公司提供的服務
• 招募新直板公司的知識
• 組織和管理外部行銷活動，包括公司活動和社區服務
• 與客戶建立牢固的關係並與客戶保持牢固的聯繫

津貼和福利

• 定期團隊活動
• 事假
• 個人發展機會

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment/materials/process

Qualifications

1. Possess at least a Bachelor's Degree in engineering or science
2. Able to think critically with strong investigating skills
3. Possess good communication skills
4. Possess good time management skills as well as a strong sense of commitment
5. Prior leadership or competition experience in school activities will be an advantage

Candidates with at least 2 years of relevant prior working experience may be considered for a senior position

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment/materials/process

Qualifications

1. Possess at least a Bachelor's Degree in engineering or science
2. Able to think critically with strong investigating skills
3. Possess good communication skills
4. Possess good time management skills as well as a strong sense of commitment
5. Prior leadership or competition experience in school activities will be an advantage

Candidates with at least 2 years of relevant prior working experience may be considered for a senior position

We are inviting passionate individuals to COME and JOIN us. Be part of our team, ARKEMA!

The plant in Singapore, located in Jurong Island, is new and combines monomer and polymer productions. It is the result of exceptional investments and aims to support strong demand from the customers in Asia.

As process engineer single sector, the successful candidate will contribute to improve the performance of the Sector, in terms of reliability, efficiency, quality, process safety, environment and variable costs. Upon request of the Head of Process, the successful candidate may have to work on studies conducted in other sectors, depending on the study priorities, and load plan of the moment.

OBJECTIVES

• To analyse and improve the processes according to the similar processes in Arkema
• To improve productivity and profitability.
• To improve process safety

TECHNICAL SCOPE

1. Process and Engineering knowledge:

• Provide knowledge of the process and contributes to the update of the process reference documentation on the unit process (process description, PFD, PID, etc.).
• Perform engineering calculation and provide equipment data sheet in supporting the needs of Operation and Technical service department through Management of Change Process (MOC).
• Participate in technical evaluation process for vendor selection.
• Knows the bottlenecks of the assigned Sector.
• Performs material, utility and thermal balances.

2. Technical assistance:

• Analyses and assists in the resolution of trouble shooting.
• Establishes the monthly performance report of the unit: energy consumption and environmental losses.
• Follows and contributes to improve the unit's performance in terms of reliability, efficiency (including energy efficiency) and variable cost.

3. Process Safety:

• Lead HAZOP studies
• Updates process Hazard Analysis (PHA) and prepares documentation for Hazard Analysis & participates in safety reviews in case of new project.
• Performs scenario calculations with the tools available.
• Follows up on process modifications to improve HSE in the unit.

4. Process Development:

• Participates or leads process improvement groups, in liaison with R&D.
• Defines industrial tests and follows their progress.
• For investment projects: specifies basic process data, equipment design (process data sheet), reviews/comments PFD&PIDs, participates in the detailed studies and participates in the start-up.

HEALTH, SAFETY, ENVIRONMENT, QUALITY AND MANAGEMENT SYSTEMS

• Promote the company’s EHSQ policy and other requirement.
• Report any incidents, accidents or near miss immediately to HSE department.

LEADERSHIP

• Expected to tutor and or train newcomers (junior process engineer, production staff) in their area of expertise.
• Take the lead on process-related topics.

Education: Bachelor’s degree in Chemical Engineering with 3 to 5 years of working experience in chemical plant process engineering.

Knowledge:

• Process Calculation (ASPEN or other Simulation tools), statistics, data reconciliation software.
• Knowledge of single process operations of chemical engineering.
• Knowledge of Process Hazard risk analysis methodologies

Skills:

• A team player with good interpersonal communication skills
• Fluent in English
• Reporting

Soft skills:

• Curious
• Self-motivated, independent, and proactive

JOB SCOPE & JOB RESPONSIBILITIES

• Basic design of heat. Mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, demin, pre-treatment, biological, chemical, PWT, etc.
• Sizing of equipment, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Exd, ISA standards, codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, optimization and hand-over.

JOB REQUIREMENT

• Degree in Chemical /Environmental engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore & onshore.
• Min. senior 10 years or engineer 5 years similar job scope preferably in Oil & Gas, Power Plant or in the water/wastewater Industries.
• Proficiency in AutoCAD is an added advantage

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a Bachelor's Degree in engineering or science
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Strong semiconductor device knowledge background will be an advantage
• Candidate with at least 2 years of 28nm or below advanced node working experience may be considered for a senior position

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Roles & Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment / materials / process
5. Work on process characterization & development in the most advanced & new logic & specialty technologies
6. Evaluate new tool/process to meet future technology requirements
7. Coordinate with cross-functional modules to set up the process for customers and ensure process robustness for Fab manufacturing and production

Requirements
• PhD / Masters / Degree in Electrical / Electronics / Physics / Chemical Engineering
• More than 6 years relevant fab experience
• Prior 200mm/300mm R&D experience would be added advantage
• Good interpersonal & communication skills

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Roles & Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment / materials / process
5. Work on process characterization & development in the most advanced & new logic & specialty technologies
6. Evaluate new tool/process to meet future technology requirements
7. Coordinate with cross-functional modules to set up the process for customers and ensure process robustness for Fab manufacturing and production

Requirements
• PhD / Masters / Degree in Electrical / Electronics / Physics / Chemical Engineering
• More than 10 years relevant fab experience
• Prior 200mm/300mm R&D experience would be added advantage
• Good interpersonal & communication skills

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Roles & Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment / materials / process
5. Work on process characterization & development in the most advanced & new logic & specialty technologies
6. Evaluate new tool/process to meet future technology requirements
7. Coordinate with cross-functional modules to set up the process for customers and ensure process robustness for Fab manufacturing and production

Requirements
• PhD / Masters / Degree in Electrical / Electronics / Physics / Chemical Engineering
• More than 10 years relevant fab experience
• Prior 200mm/300mm R&D experience would be added advantage
• Good interpersonal & communication skills

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Roles & Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
2. Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
3. Establish process parameters for a variety of semiconductor equipment to ensure line stability
4. Evaluation and development of new equipment / materials / process
5. Work on process characterization & development in the most advanced & new logic & specialty technologies
6. Evaluate new tool/process to meet future technology requirements
7. Coordinate with cross-functional modules to set up the process for customers and ensure process robustness for Fab manufacturing and production

Requirements
• PhD / Masters / Degree in Electrical / Electronics / Physics / Chemical Engineering
• More than 6 years relevant fab experience
• Prior 200mm/300mm R&D experience would be added advantage
• Good interpersonal & communication skills

JOB SUMMARY

Assistant Process Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Assist and support Manufacturing Engineer on daily production activities as below.

· Create Assemble processes and train Operators.

· Able to perform Assembly process for High Level Assembly (HLA). Understanding on assembly drawing and procedure.

· Perform PM, also keeping track on Engineering Tools, Fixture records.

· Assist Manufacturing Engineers in NPI run, product quality issue and provide the finding and RCCA (Root Cause & Corrective Action).

· Assist Manufacturing Engineers in product evaluation and necessary data collection.

· There will be a strong linkage with the Quality Assurance department in supporting the Regulatory and Compliance requirements of an ISO13485 organization.

· Assist in coordination of line re-configurations and machine/workstation move activities, including equipment arrival, installation, and process related setup.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply with all procedures within the company security policy.

REQUIREMENTS:

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Mechatronic/Mechanical) or equivalent. At least 2 year(s) of working experience in the related field is required for this position.

· Knowledge in medical product will be added advantage.

· Able to implement continuous improvements and cost reduction programs.

· Good communication skills.

· PFMEA, process flow.

· Tooling and fixture management