Total 214 Solution Engineer job vacancies in Quality Assurance / Control category in D22 Jurong, Jurong Island, Tuas

Job Description

Responsibilities

· Must possess hand-on experience to correlate, investigate and

resolve matters pertaining to quality information

· Co-ordinate with various departments and customer on quality

issues

· Follow-up other duties as required.

· Strong analytical, meticulous and problem solving skills

· Highly motivate and pro-active personality, with good

communication and interpersonal skills

· Knowledge and experience in ISO 9001, IATF 16949 and ISO 13485

Quality System would be advantage

· Pragmatic,hands-on and capable for multi-tasking

Requirements

· Diploma in Manufacturing/Mechanical Engineering/Quality or equivalent

· Minimum 3-4 years relevant experience

· Able to start work within short notice/immediately will be advantageous

Responsibilities

• Perform tooling inspection and evaluate First Articles to ensure components and products conform to specifications
• Generate detail inspection and reports as necessary; provide necessary supportive documentations for product qualifications / customer approvals
• Ensure completion of inspection activities according to planned schedule assigned by Supervisor or Manager
• Ensure compliance of equipment and tools use during inspection in accordance with calibration and preventive maintenance requirements
• Ensure First Articles are marked with product identification, status and traceability
• Support other departments, suppliers and customers on quality related issues
• Audit manufacturing process to ensure that quality management system is in place
• Generate monthly QPR report
• Train or educate junior inspector on measurement techniques
• Meet quality objectives set by management & comply to all QMS requirements
• Stand in for the QA Supervisor in her absence
• Other duties as and when assigned by Supervisor or Management
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma in Precision Engineering or relevant
• Relevant experience in plastic injection mold making industry
• Knowledge and experience in SQC tools, ISO 9001, ISO 13485 QMS and GD&T

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below.

We regret that only shortlisted candidates will be notified.

Main Duties and Responsibilities:

• Manage and coordinate all Quality activities on site.
• Maintain compliance and administration of the company’s H&S, ISO, GMS systems, and all Regulatory processes, policies, and procedures in line with relevant legislation and company requirements.
• Assist in all site Vendor, Internal, Customer and Surveillance audits.
• Management of customer complaints, ensuring effective and efficient closure, and the implementation of any corrective actions.
• Work with other internal departments to ensure the correct quality standards are agreed and met, in relation to the introduction of new products into production.
• Maintain calibration records for all calibrated equipment on site.
• Maintain and assist in updates to site ISO 9001:2015 Quality Management System.
• Review and update site QMS.
• Assist in incoming, in-process and final inspection process.
• Point of contact for customer concerns ensuring customer expectations are met and exceeded.
• Work with vendors on supplier quality complaints.
• Log and update corrective and preventive actions on site CAPA (Agile) system.
• Responsibility for new vendor set up, and maintaining site Vendor rating process.
• Complete customer quality documentation (COA/COC etc.)
• Work with Production and Engineering Department to complete Installation, Operational and Process Qualifications (IOPQ) on new equipment and material produced on site.
• Ensure training records are kept up to date.

Requirements:

• Diploma/Degree in any Engineering discipline.
• Minimum of 3 years of relevant working experience.
• Able to work independently and as a team with good prioritization skills.
• Good time management and communication skills.
• Possesses knowledge in QMS and ISO9001:2015 process.

1. Developing and implementing quality standards;
2. Developing and implementing quality management systems (QMS).
3. Organizing internal audit based on QMS standards (such as ISO9001, IATF16949, vda6.3) and supplier audits.
4. Determining quality metrics, monitoring and analyzing the performance;
5. Inspecting and testing products, raw materials and processes to ensure quality specifications are met.
6. Collaborating with different departments to develop and implement controls and improvements.
7. Ensuring that workflows, processes, and products comply with QMS requirements and customers’ expectation.
8. Investigating and troubleshooting product or production issues.
9. Developing corrective actions, solutions, and improvements.
10. Reviewing codes, specifications, and processes.
11. Formulation and Process Optimization.

Responsibility

• Supervise a team of QA inspectors in ensuring the inspection, testing and measurement of in-coming material, in-process and out-going products are conducted according to the established procedure and within the defined timeline.
• Maintaining the workflows, processes, and products comply with ISO9001 QMS requirements and customers’ expectation.
• Coordinate with internal teams on investigation of customer complaint on product quality and internal non-conformance, including containment actions, material disposition, corrective actions, and risk mitigation to prevent recurrence.
• Support regulatory and customer audits.
• Identify opportunities for process improvements and contribute to continuous improvement initiatives.
• Utilize statistical tools to monitor and assess product performance.
• Maintain laboratory equipment’s calibrations, consumables and arrange external microbiological testing.
• Well-versed in Good Manufacturing Practices.
• Perform any other tasks assigned by the reporting manager.

Requirement

• Bachelor’s degree in quality or engineering.
• Well versed of ISO9001.
• Proficient in SAP.
• Good understanding in root cause analysis and CAPA approach, SPC, FMEA and risk assessment approach.
• Proficient in Microsoft Office applications.
• Effective communication and Interpersonal skills.
• Problem-solving and analytical skills.
• Good report writing skill.
• Knowledge of metal and flexible packaging is a plus.
• Knowledge of ISO13485 is a plus.
• Preferably able to start work immediately or at short notice.

NOTE: We regret that only short-listed candidates will be notified.

Job Overview:

We are seeking a detail-oriented and highly organized QA Testing Engineer specializing in both web and mobile applications. Your role will be to establish and implement best practices in testing activities. Collaborating with cross-functional teams, you will create comprehensive test plans and manage the overall quality assurance lifecycle for our products & applications.

Key Responsibilities:

• Design, develop and implement QA test procedures and test cases, ensuring comprehensive coverage
• Oversee the QA process, modify testing procedures, and implement improvements as needed
• Collaborate with developers, product managers, and other stakeholders to define acceptance criteria and ensure high-quality deliverables
• Troubleshoot quality issues, identify root causes, and work with development teams to implement fixes
• Analyze test results, provide insights to development teams, and ensure traceability of requirements and test cases
• Ensure testing artifacts are complete and adhere to quality standards throughout the SDLC project delivery methodology

Qualification & Skills:

• Bachelor's degree in computer science, software engineering, or a related field.
• 3+ years of experience in QA testing for web and mobile applications
• Strong knowledge of QA methodologies, tools, and processes.
• Experience writing and executing comprehensive test cases with tools like JIRA/XRAY or the similar.
• Familiarity with accessing application logs to troubleshoot issues
• Experience creating and executing automated tests for Web (UI/UX), API, and mobile platforms
• Knowledge of Selenium WebDriver, Java, Cucumber, Postman, and SQL tools
• Strong communication, problem-solving, and analytical skills.

** Salary will be commensurate with the candidate's level of experience and qualifications, reflecting our commitment to equitable compensation practices

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are Solar's Most Trusted!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments. Scope of work may include Quality management system improvement, Product certification management, quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are encouraged to apply.

Essential Duties and Responsibilities:

Quality Management System according to ISO 9001

• Review and update Quality Management System procedures to meet the quality system requirements
• Maintain and update documents and records with proper documentation control & distribution
• Ensure system compliance & preparations for Management Review
• Manage internal and external corrective action reports (CAR)
• Maintain and improve the calibration management system
• Manage, conduct and improve internal audit programs and document review procedures
• Ensure readiness of all sections for both 3rd party certification body and customer audits
• Liaise with external auditors and certification bodies in conducting audits

Product Development Framework

• Schedule decision gate review meetings on request according to regular review schedule slots
• Support technical project managers and department heads on preparation of project decision gate presentations in accordance to REC project execution guidelines, to ensure that projects are delivered timely and meet targeted technical and business objectives adequately
• Continuous improvement of the phase-gate review design and process

Product Certification and Reliability

• Manage the interface between international and national certification bodies and internal project teams in product certification compliance to international product standards (UL, IEC) and statutory requirements
• Maintain meeting minutes with certification bodies and file certification documentation in web-based database
• Monitor product reliability trends and analyze product testing results as part of reliability scope
• Initiate product reliability studies based on known data from internal and external testing

Quality Assurance Planning

• Develop and implement quality control plan for adequacy and suitability for the production
• Drive improvement of process and product quality by monitoring quality indicators (SPC, Yield, defect rates)
• Non-conforming materials and products management
• Benchmark, develop and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.

Training / Coaching

• Conduct QMS and change management related training and coaching activities as part of organizational competency development

Others

• Perform other duties as assigned

WORK LOCATION: REC Solar, 20 Tuas South Avenue 14 Singapore 637312
(Company Transport available to/from selected locations islandwide.)

QUALIFICATIONS

Technical / Professional:

• Minimum bachelor's degree (engineering discipline preferred)
• Working experiences in QMS and ISO 9001 audit, preferably in manufacturing industries
• Experience in using quality tools for problem solving
• Fresh graduate with strong technical and analytical interests will be considered

General:

• Strong sense of ownership and self-motivation, good initiative
• Must be able to work independently
• Proactive working attitude hands on approach
• Strong organization and project management skills
• High level of accuracy with special attention to detail.
• Ability to write procedures and work instructions.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally.
• Proficiency in Microsoft Office applications such as Word, Excel and PowerPoint
• Good time management with ability to handle pressure and multitask under tight timelines
• Ability to work with limited supervision and through extended hours when needed
• Working experience in Solar/Semiconductor/Electronics manufacturing industry is advantageous.

Please note that your application will be sent to and reviewed by the direct employer - REC Group

Duties and Responsibilities

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline
• Fresh graduates are welcome to apply if h ine
• At least 2-3 years of working experience in quality engineer related to the manufacturing environment, preferably from the oil & gas industry
• Fresh graduates are welcome to apply if have relevant engineering study
• Able to interpret technical documents and drawings
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• Able to work independently and contribute to the team excellence

Job Info:

• Salary: Basic from $3500 - $3900 + VB
• Working Hour: Monday - Friday (8am - 5:30pm)
• Location: Kaki Bukit MRT

Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance
  to ISO9001

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Key Attributes/Responsibilities

• We are looking for individuals with extensive previous experience working as a QA/QC on electrical projects with deep knowledge of electrical systems.
• Looking for individuals with experience in the construction of High-Tech facilities and well-versed with LV/22KV electrical systems.
• Review approved drawings and ensure compliance with the construction specifications.
• Coordinate with Project Engineers for technical assistance, generating Root Cause Analysis (RCA) for Client-requested quality observations, and project closeout.
• Work together with the electrical contractors to properly document the quality process, tracking and final turnover.

Educational requirements

• Bachelor of Engineering
• 5 years or more working experience, prefer in manufacturing environment
• Experience with complicated system testing involving both hardware and software in related field, preferably within the industry parameters of Willowmore
• Experience with defect management system is desirable.
• Leadership, self-motivation, proactive and strong relationship building skills
• Demonstrated ability to lead and control manufacturers to deliver what is required
• Hardworking, willing to learn and able to pick up skills quickly.

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

• Lead QC team, supervise and coordinate operational activities to ensure that operational quality targets are reached.
• Monitor and report performance of quality tools and local processes.
• Participate in development of local methods, procedures and systems to improve the quality of the products and productivity.
• Ensure that corrections and corrective actions are implemented for quality non-conformities.
• Participate in internal and external audits.
• Ensure that operational quality instructions conform statutory and regulatory requirements.
• Implement quality and EHS culture within own responsibility area.
• Promote / support continuous improvement in local operations.
• Support training / development for own team.
• Report to your immediate supervisors any incident, accident, near miss or dangerous occurrence so that prompt action can be taken to address them.

Requirements:

• Diploma/Certificate in Engineering, Manufacturing or Quality Control / Quality Assurance.

About us (About SLB)

We are a global technology company, driving energy innovation for a balanced planet.

Together, we create amazing technology that unlocks access to energy for the benefit of all.

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse groups of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Job Description:

The Supplier Quality Engineer is responsible for developing and maintaining Company’s Approved Supplier List to meet Company’s requirements. The Supplier Quality Engineer is responsible to ensure quality of the parts/services provided by the suppliers.

Successful Position holders are excellent communicators, enjoy solving problems, and work well in teams.

Roles and Responsibilities:

• Lead QMS (Quality Management System) and Process audit for initial evaluation of new supplier and re-evaluate of existing approved suppliers to comply with ISO 9001/API Q1 and Company’s requirements.
• Monitor supplier's performance, analyze data to identify the risk and drive performance improvement plan to meet company’s supplier quality expectations.
• Lead investigation of Supplier Quality Issues by collaborating with all relevant internal and external stakeholders including Engineering team, SME (Subject Matter Expert), suppliers, etc.
• Initiate and guiding supplier to conduct RCA (Root Cause Analysis) using the appropriate quality tools: 8D Methodology, The 5-Whys, Fishbone Diagram, and other applicable problem-solving techniques.
• Execute Parts and Process Qualification Plan with suppliers.
• Setup Quality Inspection criteria (QIR) for new parts purchased from suppliers.
• Involve in supplier selection with sourcing team to input quality perspective.
• Provide training and addressing supplier’s technical queries.
• Support development and implementation of strategic initiatives when assigned.

Qualifications and Experience:

• Bachelor’s in Mechanical Engineering or equivalent.
• Minimum experience of 10 years in Supplier Quality or Manufacturing or Engineering or Project Management related functions.
• Preferred with ISO 9001:2015 QMS Auditor/Lead Auditor (CQI/IRCA) certification.

Technical/Critical Soft Skills:

• Well versed in Quality Assurance fundamentals including ISO 9001/API Q1, 8D Methodology, Root Cause Analysis, data analysis and other problem-solving techniques.
• Good understanding of manufacturing processes and their related quality risks.
• Effective verbal and written communicator at all levels within the organization and externally with suppliers.
• Ability to work in a collaborative team environment.
• Strong analytical skill with high attention to detail & accuracy.
• Proactive and fast learner.

Job Description:

• Support the Quality Manager in managing daily quality assurance activity to ensure the incoming product quality or out-of-factory product quality
• Ensure that non-conformance parts and products are not released to the customers.
• Ensure that defects are corrected before release to production or from production
• Ensure that Quality system and inspection procedures are constantly reviewed and updated to reflect the latest development.
• Ensure that corrective or preventive actions are in place and sustained.
• Ensure that field claim issues are followed up; closed and preventive actions are in place.
• Ensure that inspection reports are duly completed and accurate.
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Key Responsibilities:

• Responsible for maintaining the quality of parts / products / quality records / respective area
• Responsible for trending and highlighting quality of parts and products for corrective action.
• Responsible for follow up on Quality matters till final disposition. Conduct meeting with related departments and vendors.
• Responsible for the documentation of inspection processes.
• Responsible for training and developing assistant engineer level
• Responsible for training and developing vendors on matters relating to product quality issues
• Responsible to lead the section and assign job daily.
• Responsible in ensuring equipment used are well maintain and in good running condition
• Perform investigation on quality matters and furnish investigation report
• Ensure the team comply with the EHS procedures
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace
• Any other job as assigned

Qualification:

• Diploma /Degree in quality control or related field
• Experience in supervisory level
• Experience in ISO9001/ISO14001/OHSAS45001 related quality system
• Experience in use of Quality tools