Total 7,287 Full-time Maintenance Supervisor job vacancies in Maintenance / Repair category in The United States of America

Job Description :

• To manage & monitor the maintenance and repair activities for all maintenance discipline (Inspection, Rotating, Static, Electrical & Instrumentations) to ensure continues serviceability, reliability, and safe Terminal operation.
• Continuously review, evaluate, and enhance the effectiveness of maintenance programme (Preventive, predictive) to minimize the equipment breakdown and optimize the maintenance cost through the Computerized Maintenance Management System (CMMS). 
• To consolidate, review and monitor annual OPEX and sustainability CAPEX budget for Maintenance Section and ensure budget expenditure within agreed budget and schedule.
• Manage the spare inventory requirements and ensure that sufficient minimum levels of spare parts are available as per critical asset list. 
• To review standard operating procedure (SOP), work instruction (WI), training module, monitor and evaluate effectiveness training programme for develop competency of maintenance staffs.
• To liaise with internal staff & external parties such as local authorities, neighbours, consultants, contractors & vendors in carrying out the above activities. 
• To lead machinery/installation root cause failure analysis (RCFA) and review  investigation report within required timeframe.

 Expected Level of Proficiency:

• Education: Degree in Mechanical, Electrical, Maintenance Management or equivalent related courses.
• Minimum 15 years of working experience in the petrochemical/chemical industry.
• Good knowledge in Terminal or Plant operation (i.e. Pressure Vessel, Tanks, Rotating Equipment, Marine Equipment System, Electrical Equipment, DCS and Maintenance Management System.
• Knowledge of safety regulations, industry standards, and best practices.

Perks & Benefits :

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave

Job Responsibilities:

• Propose and prepare project design based on space efficient.
• Prepare 2D, 3D layout and detailed drawings for nationwide project.
• Prepare and/or review accuracy of Bill of Quantity (BQ) document provided by contractors/vendors. Conduct site inspection pre and post renovation for measurements, review renovation work against proposed layout and design, look for areas of improvement in terms of design and layout for future locations.
• Manages and supports branch development and maintenance activities for nationwide branches.
• Negotiate with suppliers/contractors vendors on the cost and purchase of items, services, works and repairs as needed.
• Manages on overall delivery of items purchased and to monitor/oversee repair and maintenance works done as needed until completion.
• To assist branch to resolve any maintenance/repair issues in a timely manner. This includes obtaining quotations, sourcing vendors, raising workflow approvals, and follow-up on issue until it is resolved and processing of invoices for work done.
• Responsible on conducting post renovation checks for defects, check renovations works is in accordance to BQ and complete inspection checklist of findings.
• Assist to prepare the necessary documentation for internal for any relocation and expansion project.
• To be flexible in undertaking any other special task, projects or assignment that may be assigned to you accordingly by management.
• Responsible to maintain Fixed Asset Listing for Regional Support Department as well as Regional Offices, Branches.
• To assist with compiling, checking of accuracy of invoices and completeness of supporting documents from Regional Support Department as well as Regional Offices, Branches before submission to Finance for payment.
• To assist with filing of all opening/relocation/expansion/ refurbishment projects for audit purposes.
• To ensure new joiners are provided with the necessary system access, PC's and etc.
• Manage in Ordering of office supplies and monitor inventory for Regional Support Department, all regions and branches.
• Assist in necessary report completions for the department. 

Requirements:

• Possess at least a Bachelor’s Degree in Architecture, Quantity Surveyor, Project Management or relevant field
• Minimum 2 years working experience in Property Maintenance/Construction or relevant work experience
• Exposure to current design trends preferably in banking/insurance, retail or commercial designs is an added advantage
• Able to perform task given under minimum supervision

Perks & Benefits:

• Nearby public transport
• Central location
• Casual dress code
• Personal leave
• Personal development opportunities

DUTIES & RESPONSIBILITIES:

• Repair and maintain Secondary Operations (Sec-Op) equipment

• Ensure equipment are in good condition to run sampling or production according to

schedule

• Set up the equipment according to approved parameters to allow parts to be run for

production

• Evaluate different parameters to produce parts that meet customer surface finishing

requirements

• Fabricate/modify supporting equipment to improve efficiency and/or safety

• Other jobs as assigned by superior in support of Sec-Op operations

REQUIREMENT:

• Candidate must possess at least a Diploma preferably in Mechanical Engineering /

Mechatronics Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.

• Min 3-5 years hands-on experience in maintenance field,

• Able to work as a team and discuss constructively.

• Required skill(s): Microsoft Office, problem solving skill & so on) is added advantage.

• Fluent written & spoken English and Bahasa Malaysia languages

• Applicants must be willing to work in Alor Gajah. 

Address 

Lot 154, Jalan Industri 8, Alor Gajah Industrial Estate, 78000 Alor Gajah, Melaka, Malaysia.

Interested candidates can email to Ms. Leong (ccleong@dynacast.com.my , Office Tel no.:+606-556 8046) with your full resume and recent photo.

BENEFITS: 

• Good and positive career path in a multinational company.
• Lucrative remuneration
• Medical Fee/Medical Disbursement/Insurance provided
• Petrol allowance 

WORKING HOURS:

• Mon – Fri with alternate Sat, 

職位說明 ：

• 管理和監控所有維護學科（檢查、旋轉、靜態、電氣和儀表）的維護和維修活動，以確保持續的可維護性、可靠性和安全的碼頭運作。
• 透過電腦化維護管理系統 (CMMS) 不斷審查、評估和增強維護計劃（預防性、預測性）的有效性，以最大限度地減少設備故障並優化維護成本。
• 鞏固、審查和監控維護部門的年度營運支出和永續資本支出預算，並確保預算支出在商定的預算和時間表內。
• 管理備件庫存要求並確保根據關鍵資產清單提供足夠的最低水準備件。
• 檢視標準作業程序（SOP）、工作指導（WI）、訓練模組，監控和評估訓練計畫的有效性，以培養維修人員的能力。
• 在進行上述活動時與內部員工和外部各方（例如地方當局、鄰居、顧問、承包商和供應商）聯絡。
• 在規定的時間內領導機械/安裝根本原因故障分析（RCFA）並審查調查報告。

預期熟練程度：

• 教育背景：機械、電氣、維護管理或同等相關課程學位。
• 至少 15 年石化/化學產業工作經驗。
• 熟悉碼頭或工廠操作（即壓力容器、儲槽、旋轉設備、船舶設備系統、電氣設備、DCS 和維護管理系統）。
• 了解安全法規、行業標準和最佳實踐。

津貼和福利：

• 津貼（旅費、交通費等）
• 醫療保險
• 事假

Responsibilities :

Able to do simple electrical work (single phase and three phase)
Have experience maintaining aircon, air compressor and cooling towers
Have experience maintaining stamping machines
Have soldering and welding experience
 

Candidate Requirements :

Candidate possess at least SPM
At least 2 years of work experience
Willing to work in Prai, Penang

Perks & Benefits

• Commission and bonus
• Casual dress code

職責與責任：

• 能夠對機器故障進行機械故障排除
• 了解機器機械部分的功能
• 致力於提高設備可靠性
• 具備工業生產線製造或開發和測試各種機械設備的機械工程技能
• 顯著降低維修成本和設備停機時間
• 生產停機率始終保持在 3% 以下
• 機械部分知識。
• 電子元件知識

要求：

• 候選人必須至少擁有機械工程/機電一體化工程（金屬製造/工具和模具/焊接）或同等學歷的文憑。
• 至少 3-5 年維修領域實務經驗，
• 能夠進行團隊合作並進行建設性討論。
• 所需技能：Microsoft Office、解決問題的技能等）是額外的優勢。
• 流利的英語和馬來語書面和口語
• 鼓勵應屆畢業生申請
• 提供全職職位
• 申請人必須願意在亞羅牙也工作。

地址
Lot 154, Jalan Industri 8, Alor Gajah Industrial Estate, 78000 Alor Gajah, Melaka, Malaysia.

有興趣的候選人可以發送電子郵件至梁女士（ccleong@dynacast.com.my，辦公室電話：+606-556 8046），並附上完整的簡歷和近期照片。

好處：

• 在跨國公司擁有良好且積極的職業道路。
• 豐厚的薪酬
• 醫療費/醫療支出/提供保險
• 汽油津貼

工作時間：

• 週一至週五，週六交替，

Responsibilities :

Able to do simple electrical work (single phase and three phase)
Have experience maintaining aircon, air compressor and cooling towers
Have experience maintaining stamping machines
Have soldering and welding experience
 

Candidate Requirements :

Candidate possess at least SPM
At least 2 years of work experience
Willing to work in Prai, Penang

Perks & Benefits

• Commission and bonus
• Casual dress code

Responsibilities:

• Maintenance of various systems and equipment in the shopping mall, including air conditioning, plumbing, electrical, firefighting systems, and CCTVs.
• Inspect buildings and equipment regularly to ensure compliance with safety standards.
• Implement preventative maintenance procedures to prevent breakdowns and extend equipment lifespan.
• Perform general maintenance tasks such as welding, grinding, and installation as required.
• Monitor electrical, water consumption, and lighting conditions for efficiency and safety.
• Ensure facilities are well-maintained through periodic servicing and repairs.

Requirements:

• Solid physical condition and strength.
• Minimum SPM/O level or equivalent; Certificate in building maintenance technology or relevant field will be a plus.

Perks & Benefits

• Yearly performance bonus
• Medical insurance
• Panel clinic
• Personal development opportunities

職責：

• 商場內各種系統設備的維護，包括空調、管線、電氣、消防系統和閉路電視。
• 定期檢查建築物和設備，以確保符合安全標準。
• 實施預防性維護程序，以防止故障並延長設備使用壽命。
• 根據需要執行焊接、打磨和安裝等一般維護任務。
• 監控電力、水消耗和照明條件，以提高效率和安全性。
• 透過定期保養和維修確保設施得到良好維護。

要求：

• 身體素質紮實，體力充沛。
• 最低 SPM/O 水準或同等水準；具建築維護技術或相關領域證照者優先。

津貼和福利

• 年度績效獎金
• 醫療保險
• 專案診所
• 個人發展機會

JOB DESCRIPTION :-

· To perform both preventive maintenance and repair/daily maintenance work to all equipment used in production and to minimize down time.

· To analyze and report to superior on any faults found in production equipment which may directly or indirectly cause defect to production.

· To propose new idea of facilities in order to improve production yield and productivity.

· To prepare maintenance report on daily basis to fulfill ISO requirement.

· To monitor the production line to meet the schedule given.

· Involve in company's improvement activities.

· Perform additional job as required by Superior.

JOB REQUIREMENTS:-

· Candidates must possess at least a Professional Certificate/Diploma/Advanced/Higher in Electrical, Mechanical, Tool & Die, Mechatronics Engineering or equivalent.

· At least 2 years working experience in related field.

· Able to work overtime.

· Able to work independent.

Perks & Benefits

• Commission and bonus
• Company trips
• PA Insurance

職位說明 ：-

· 對生產中使用的所有設備進行預防性維護和維修/日常維護工作，並儘量減少停機時間。

· 對生產設備中發現的可能直接或間接導致生產缺陷的故障進行分析並向上級報告。

· 提出新的設備概念，以提高產量和生產力。

· 每天準備維修報告以滿足ISO要求。

· 監控生產線是否符合給定的時間表。

· 參與公司的改進活動。

· 依照上級的要求執行額外的工作。

工作要求：-

· 候選人必須至少擁有電氣、機械、工具和模具、機電工程或同等學歷的專業證書/文憑/高級/高級證書。

· 至少2年相關領域工作經驗。

· 能適應加班。

· 能夠獨立工作。

津貼和福利

• 佣金和獎金
• 公司旅行
• 個人保險

• Food Manufacturer @ Gelang Patah
• Up to RM 2800 (depends on experience)
• Min Diploma
• Benefit: Travel allowance

Job Responsibility:

• Perform general maintenance activities
• Troubleshooting, operational testing, repair / replacement of faulty equipment
• Perform and follow up on scheduled maintenance work
• Handle equipment calibration programs and calibration work

Requirements:

• Qualification: Minimum Diploma in Mechanical or Electrical
• Able to liaise with English and Malay speaking counterpart
• Minimum 2 years related working experience
• Knowledge in calibration, mechanical and electrical etc

If interested, please send your resume or Whatsapp to 0187633119

Perks & Benefits

• Travel Allowance
• EPF
• SOCSO

• 食品製造商 @ Gelang Patah
• 高達 RM 2800（取決於經驗）
• 最低文憑
• 福利： 旅費津貼

工作職責：

• 執行一般維護活動
• 故障排除、運轉測試、維修/更換故障設備
• 執行並跟進預定的維護工作
• 處理設備校準計劃和校準工作

要求：

• 資格：機械或電氣最低文憑
• 能夠與英語和馬來語同行聯絡
• 至少2年相關工作經驗
• 校準、機械和電氣等方面的知識

如有興趣，請寄履歷或Whatsapp至0187633119

津貼和福利

• 旅遊津貼
• 公積金
• 社會保險協會

• Responsible for maintaining, troubleshooting and reporting of Machinery
• Schedule, jobs prioritization and manage technicians to meet preventive maintenance schedules to minimize downtime during active production routines
• Apply corrective actions during critical and emergency situations
• Maintain SOP including updating work instructions
• Maintain records of machinery and spare part inventory
• Contribute to continuous improvements

Requirements:

• At least 3 to 5 years working experience in maintenance field works of Food Manufacturing will be an advantage
• Good Computer skills
• Must be able to converse in both English & Mandarin and dialects will be an advantage
• Hands on licensed electrical worker will be an advantage
• NITEC / Higher NITEC / Diploma in Engineering

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant