Total 245 structural engineer job vacancies in selangor

JOB SUMMARY

1. Must have good understanding of working procedures ISO 45001 : 2018 , CIDB Act, international standards and practices pertaining to scaffolding safety, integrity and accessibility.

2. Support for EPCC, Business Development, Operation and Training Department for technical advise.

3. Experience in calculate and prepare drawing for civil, structural and scaffolding erection works.

4. Prepare, analyze and approve scaffolding design proposals / reports, calculations, sketches, method statements and HSE related documents and to assess the scaffolding procedures and submit to client / Operation / authority bodies.

5. Participate in client site meetings or direct meetings with clients management personnel during the kick-off to advise EPCC & Operation on planning to ensure alignment with project commencement & overall schedules.

6. To support EPCC & Operation department and manage for site investigation.

7. Support quality in the development or redesign of products and test procedures to meet quality standards

8. Advise on the risks identified by the Risk Assessment Report and identifies the resources required to ensure the scaffolding operations are carried out safely.

9. Advise with support by EPCC, BD Department on material, manpower planning, project costing before execution of new projects, tender exercise, RFQ exercise and handover to Operation Department.

10. Analyze and advise post mortem report issued by EPCC & Operation for improvement.

11. Support for EPCC, marketing products and services.

12. Coordinate internal audit in quarterly basis to ensure all ISO 45001 : 2018 compliance requirements and asset management are maintained and driving continuous improvement initiatives.

13. To perform any other tasks as requested by the superiors and management and to generally, perform all administrative work.

14. To strictly adhere to ISO 45001 : 2018 requirements when carry out auditing.

Perks & Benefits

• Nearby public transport
• Central location
• Sabbatical leave

工作總結

1. 必須充分了解工作程序 ISO 45001 : 2018、CIDB 法案、有關鷹架安全、完整性和可及性的國際標準和實務。

2. 為EPCC、業務發展、營運和培訓部門提供技術諮詢支援。

3.具有土木工程、結構和鷹架安裝工程計算和繪製圖紙的經驗。

4. 準備、分析和批准鷹架設計方案/報告、計算、草圖、方法說明和 HSE 相關文件，評估鷹架程序並提交給客戶/營運/權威。

5. 在啟動期間參加客戶現場會議或與客戶管理人員的直接會議，就規劃向 EPCC 和營運提供建議，以確保與專案啟動和整體時間表保持一致。

6. 支援EPCC和營運部門並管理現場勘察。

7. 支援產品開發或重新設計以及測試程序的質量，以滿足品質標準

8. 對風險評估報告中確定的風險提出建議，並確定確保鷹架作業安全進行所需的資源。

9. 在EPCC、BD部門的支持下，就新專案執行前的材料、人力規劃、專案成本核算、招標工作、詢價工作以及移交給營運部門提供建議。

10.分析EPCC和營運部門發布的事後報告並提出改善建議。

11. 支援EPCC、行銷產品和服務。

12. 按季度協調內部審計，以確保維持所有 ISO 45001:2018 合規要求和資產管理，並推動持續改善計畫。

13. 執行上級和管理階層要求的任何其他任務，以及一般執行所有行政工作。

14. 審核時嚴格遵守ISO 45001：2018的要求。

津貼和福利

• 附近的公共交通
• 中心位置
• 休假

We are supplying, fabricating and installation of structural steel. They have been in business for many years and due to a large increase are now looking for a structural steel drafter  

Software used is TEKLA Structures or AUTOCAD software.

The right candidate will be able to understand and read engineering drawings will have experience working on residential projects for steel erection and or Industrial, commercial.

Responsibilities :-

• Ability to interpret architectural / engineers documents and translate those requirements to detailed drawings
• A sound knowledge of the building / commercial and industrial practices is essential
• Cad ( Version 2000 or better ) knowledge of Tekla Structures software.
• Detailing of connections for beams, columns, bracing and other steel elements and determine belting
• Sound knowledge of requirement of steel erector’s requirements for layout details
• Produce detailed product listings and spreadsheets within Tekla Structures
• Describe weld types and procedures and apply weld symbols on drawings

Requirements :-

• Proven work experience as a Drafter or similar role.
• Hands-on experience with TEKLA structures & AUTOCAD software.
• Ability to meet deadlines.
• *** REMARKS: Kindly send one sample of your drafted fabricate drawing (in pdf file) to us together with your resume.

Perks & Benefits

• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Free parking

职责 / Responsibilities:

• 早期发现项目/工程和项目/工程的追踪,跟进,策略
• 营销与产品持续开发&更新
• 协助业务扩展以实现盈利增长
• 协助产品支持并向客户展示
• Business developement to profitable growth
• Products inclusive AC alternator, motor, gear boxes, controllers, brakes & etc.

要求 / Requirements:

• 至少学位/更高/工程研究生（电气/电子或机电一体化）或同等学历
• 能够说和写英文、中文、福建话和马来语的人将获得优势
• 拥有电脑知识
• 至少2 年在工业、机械或工程相关领域的工作经验
• Graduate High School / Diploma / Degree / Higher in Engineering (Mechanical / Electronic / Electrical / Mechatronic)
• Speak and write in BM and English. Mandarin would be added advantage
• Computer literacy
• Minimum 2 years experience in the INDUSTRIAL, MACHINERY or ENGINEERING field 

Perks & Benefits

• 更高的基本工资
• 销售佣金
• 津贴, 激励措施
• 年终奖金
• 提供培训
• 停车费, 工作里程汽油费和旅行费可索赔
• 移动数据、电话和手机津贴
• 应酬、出国考察、公司出差/旅行
• 医疗津贴
• PH、AL、ML、产假、陪产假、结婚假
• Sales commission
• Yearly performance bonus
• Allowance (travel stipends, transportation, etc.)
• Oversea visits & entertainment
• Company trips
• Parking, mileage & ravel claimable
• Mobile data, phone calls & handphone allowance
• Medical allowance
• Personal leave
• Sabbatical leave
• Personal development opportunities

Responsibilities:

• Create engineering drawings and designs for production and manufacturing
• Create design specifications, documentation, and material lists
• Verify drawings are correct to specifications, codes, and other regulations
• Developing technical reports for engineers
• Receive detailed project specifications and requirements from customers.
• Understand the scope of work, materials to be used, and deadlines.
• Analyse customers drawings and specifications provided by the team.
• Clarify any uncertainties or discrepancies with the engineering team before proceeding.

Requirement:

• Use CAD (Computer-Aided Design) software (e.g., AutoCAD, SolidWorks) to create 2D and 3D technical drawings.
• Maintain accurate records of drawings, revisions, and project documentation.
• Update drawings as modifications or changes are requested or implemented.
• Assist in quality control processes by reviewing drawings for accuracy and completeness.
• Ensure that final drawings meet project requirements and specifications.
• Provide technical assistance to manufacturing and assembly teams during production.
• Address design-related inquiries or issues that arise during fabrication.
• Participate in design reviews and meetings to discuss progress, challenges, and solutions.
• Interpreting customer requirements, facilitating effective communication with technical teams, general workers, and quality control.

Perks & Benefits

• Commission and bonus
• Medical insurance

Responsibilities:

• Perform highly diversified duties to install and maintain spraying and dispensing equipment at customer place.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance and service technician skill.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance and Reliability Professional (CMRP) is desired.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Company trips
• Personal leave
• Personal development opportunities
• Paid training and development

Qualifications & experience:

• Preferably 2 years working experience in relevant field
• Minimum four 4 years Bachelors Degree in Mechanical Engineer
• Excellent ability to read, analyze, and communicate effectively, both verbally and in writing in English
• Proficient in Microsoft Office, Autocad & Etc..

Task & Responsibilities:

• Perform documentation on drawings & Report
• Clarify with Installation team on their requirement.
• To ensure that design meet project / design brief and comply with statutory and regulatory requirements.
• Continually improve and optimize design for cost, process and quality.
• To manage and upkeep of design drawings.
• To liaise with clients, consultants, contractors and authorities.
• To report design and development progress to Director/Project Manager.
• To maintain of CAD software and backup devices and to ensure that all graphic documents produced are always of consistent and good quality.
• Approves As-Built drawings and ensuring that drawings are produced in a way that is useful for commissioning, maintenance and handing over to the client.

Company benefit:

• Basic + EPF
• Socso
• Car Petrol
• Company Phone Provided
• Medical Subsidy
• Normal Working Hours

Job Requirement :-

1. Candidate must possess at least a Bachelor's Degree, Professional Degree Civil Engineering.
2. At least 4-5 year(s) of working experience in the related field is required for this position.
3. Good interpersonal and communication skills.
4. Ability to supervise team of engineering to carry out task.
5. Analytical and able to carry out task independently with minimum supervision.
6. Able to liaise with clients, consultants and authorities.
7. Self motivated person with strong leadership skills.
8. Able to work under pressure and meet deadlines.
9. Knowledge in applicable legal and environment, safety & health requirements and practices.
10. Computer literate and familiar with Ms Office.

Job Descriptions :-

1. To established implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.
2. To fulfil the company’s contractual obligation to the clients.
3. To plan, manage, coordinate, monitor and control project operations & engineering and guide project engineer under his supervision.
4. To plan, coordinate and monitor subcontractor’s activities at project sites periodically.
5. To maintain good house-keeping and implement safety practices all time.
6. To ensure all works are in accordance to customers engineering standards and specification are complied on assigned or individual projects.
7. To review and monitor site work progress periodically and arrange resources as and when required based on critically of the project.
8. Analyze performance of subcontractor on the civil, erection, testing and commissioning works.
9. To ensure inspection and testing are adhered according to clients’ requirements.
10. To preparing progressive invoice to client.
11. Undertake all other duties, tasks and responsibilities as required by the management.
12. To ensure that applicable environmental, safety and health legislative, regulatory and related requirements are fulfilled at project site.
13. To ensure that site personnel, workers and subcontractors are implementing environmental, safety and health practices at their workplace.
14. To monitor, control and improve QESH performance at project site.
15. To provide adequate supports to establish and maintain the integrity of the Risk Management System

Perks & Benefits

• Annual increment and bonus
• Medical Panel Clinic
• Dental Coverage
• Vision Coverage
• GPA & GHS Insurance Coverage

Job Description

• Preparation of system design presentation to client if require.

• Preparation of RFQ, specification and assists in Technical evaluation.

• Preparation of engineering details concerning designs, drawing, studies and reporting

• Perform calculation analysis and control philosophy related to plant design

• Develop plant design and detailed specifications required by client

• Liaises and coordinates with operation teams and sub-contractors on design issues

• Assists in project quality control and assurance from time to time

• Assists in development and verification of project control documentation and status report

• To perform Mechanical design work using Autocad 2D software

• Ensure design drawings comply with requirements of the authorities and company ISO 9001

procedures.

• Knowledge of Primavera P6 is an advantage.

Job Requirements

• Candidate must possess Bachelor's Degree, Professional Degree, Engineering (Chemical,

Mechanical, Environmental) or equivalent.

• Required skill(s): AutoCad and Microsoft Office Application

• Required language(s): Bahasa Malaysia, English, Japanese (is an added advantage)

• Pleasant, outgoing personality and able to work under pressure

• Able to work effectively as part of a team and independent

• Possess own transport with a valid driving license.

• Travelling and working on site is required.

• At least 3 year(s) of working experience in the related field is required for this position

• Full-Time position available.

Responsibilities :

• To assist the Project Manager to monitor and supervise the construction works at the project site, to ensure it meets the requirements in term of cost, quality and time.
• To review construction drawings and carry out valued engineering.
• To co-ordinate with Authorities, Consultants and Sub-contractors.
• To prepare daily site reports and correspondence.
• To do site inspection to check on quality of works/ progress of works/ defect inspection.
• To attend project site meeting to ensure project schedule is adhered to, problem and defects are attended to.

Requirements :

• Candidates must possess Degree/ Diploma in Building or Civil Engineering.
• Minimum 1-2 year working experience.
• Able to plan and lead sub-contractors on day-to day operation.
• Strong communication skills.
• Must be a team player, able to work hard and independently.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code

Job Responsibilities:

• To prepare documents for project submission.
• Submit progress reports, daily activity reports, checklists and material delivery orders
• Prepare scheduled and necessary updates of construction activities and analysis of manpower and equipment required.
• Maintain budgetary, scheduling and project database oversight, and report regularly to project manager.
• To supervise and coordinate project work and team workers
• Attend site meetings, follow up and solve project issues.
• Conduct on-site inspections with the client/supervisory consultant.
• Manage compliance, quality control, and quality assurance standards and specifications
• Set up HVAC systems.
• Perform troubleshooting and preventative maintenance on HVAC/Chiller systems.
• Keep records of customer appointments and payment transactions including invoices.
• Manage accurate inventory of all equipment and HVAC/Chiller resources.
• Experienced in hand and power tools, electric meters and material handling equipment in performing duties.  

Requirements:

• Minimum SPM/O level or equivalent; Certificate/Diploma in HVAC; Degree from a vocational school or BSc/BA in M&E Engineering or relevant field will be a plus.
• Preferable 3 years relevant working experience.
• MS Office and design software (AutoCAD).
• Proven experience in HV/AC/Chiller/Maintenance.
• Willing to work overtime, travel domestic and overseas.
• Good communication skill in Bahasa Malaysia and English.

Perks & Benefits

1. Annual Performance Evaluation (Increment, Bonus)
2. Transportation & Outstation Allowance.
3. Allowance for working overtime at site in nighttime.
4. Medical & Dental claim coverage
5. Insurance coverage.
6. Leave benefits.

Welcome to be part of our team! There are many more benefits our company offers.

Purpose of Roles

Wrightbus is a fast-moving company which has experienced considerable growth in the last year. As part of this continued growth we are looking for an experienced Electrical Engineer to join our Electrical Engineering Design team. The successful candidate will have responsibility to support the further development of our Electrical Engineering Design, specifically planning and integration of the electrical control for bus body and chassis electrical systems with respect to hardware components, harnesses and panels.

JOB DESCRIPTION

• Support the NPD Strategy for EV, FCEV and HEV electrical control systems.
• Support the development of electric powertrain charging systems.
• Participate in the vehicle life cycle development through concept to engineering design, prototype build, certification, to Job 1
• Work effectively within a cross-functional team on the overall vehicle development
  Elicit external and internal stakeholder requirements for new product developments.
• Selection of electrical components and systems into new and existing vehicle designs ensuring products used meet required standards.
• Design and specification of electrical hardware components for the integration of vehicle subsystems, e.g. fuseboards, switchboxes.
• Liaise with suppliers and manage the progress to meet timing, specification, and engineering requirements
• Undertake the technical assessment and analysis of components and systems and develop optimal solutions to meet overall vehicle requirements.
• Design, and develop CAN communications systems and architecture.
• Design of low and high voltage control for bus body and chassis electrical systems,including wiring harnesses and electrical panels.
• Document, validate and provide FMEA for design reviews and NPD gateways.
• Creation of technical documentation with respect to the vehicle electrical system and installation eg. Wiring schematics, system schedules, harness drawings, electrical engineering standards and procedures.
• Provide and co-ordinate vehicle test plans and commissioning, testing and data logging of vehicle control systems.
• Provide Technical assistance to production, support engineers and the customer.
• Continued development of electrical system to improve ease of installation and to reduce the cost of manufacture.
• Co-ordinate with assembly and manufacturing teams to ensure that the assembly of the electrical system is correctly defined and implemented.
• Provide system technical information and documentation for both internal and external customers.
  
  

General Duties

• Undertake all duties in line with General Data Protection and maintain utmost level of confidentiality.
• Ensure work is completed to meet the requirements of the ISO 9001 standard.
• Ensure that you treat those with whom they come into contact in a courteous and respectful manner in accordance with the Dignity at Work Procedure.
• Wrightbus is committed to equality of opportunity and to selection based on merit. You are required to adhere to and promote the Equal Opportunities Policy throughout the course of your employment.
• You must maintain high standards of personal accountability.
• You must follow the training received when using any work items Wrightbus has provided.
• You must co-operate with others on health and safety and not interfere with, or misuse, anything provided for their health, safety, or welfare.
• You must take care of your own health and safety and that of people who may be affected by what you do (or do not do).
• Staying away from home on occasions will be necessary to meet the requirements of the roles
• Undertake any other duties or training conducive with efficient conduct of the post.

Note

This job description will be subject to review in the light of changing circumstances and may include other duties and responsibilities, as may be determined in consultation with the jobholder. It is not intended to be rigid and inflexible but should be regarded as providing guidelines within which the individual works.
Wrightbus is committed to equality of opportunity and to selection on merit.

Perks & Benefits

• Medical insurance
• Personal leave
• Personal development opportunities

HVAC (Heating, Ventilation & Air Conditioning) Industry

Job Responsibilities:

• Sales for MHI Centrifugal Chiller.
• Marketing for chiller business.
• Participation and/or Preparation for Project Tendering.
• Negotiation for Contract such as Sales Contract.
• To ensure timely collection of amounts due from customers.
• Correspondence / Follow up with Japan on going and upcoming Project.
• Can read and understand Technical Drawing and/or Technical Statement.
• Dealing with Custom/Forwarders in Import/Export.

Job Requirements:

• Language – English, Malay and/or Mandarin
• Bachelor degree in Engineering / Air Conditioning & Refrigerant System or equivalent
• Preferably 2 years working experience in HVAC/Chiller industry.
• Preferably sales experience within the chiller market and a proven track record.
• Good verbal and written communication skills, with the ability to communicate technical information to a non-technical audience.
• Possess own car and willing to travel outstation.

Perks & Benefits

1. Annual Performance Evaluation (Increment, Bonus)
2. Transportation & Outstation Allowance.
3. Allowance for working overtime at site in nighttime.
4. Medical & Dental claim coverage
5. Insurance coverage.
6. Leave benefits.

Welcome to be part of our team! There are many more benefits our company offers.

Job Title: Sales Engineer/Executive

Company: R&Y Engineering And Construction Sdn Bhd

Location: Seri Kembangan, Selangor

Employment Type: Full-time

Salary: Negotiable

Job Responsibilities:

- Identify and pursue new business opportunities.

- Develop and maintain client relationships.

- Provide technical support and solutions.

- Prepare and deliver technical presentations.

- Negotiate and close sales contracts.

- Collaborate with engineering and project teams.

- Monitor market trends and competitor activities.

- Prepare sales reports and forecasts.

Qualifications:

- Bachelor’s degree or Diploma in Engineering, Business, or related field.

- Proven sales experience in engineering or construction.

- Strong technical knowledge of EPCC services.

- Excellent communication, negotiation, and presentation skills.

- Ability to build and maintain client relationships.

- Self-motivated and goal-oriented.

- Proficient in CRM software and MS Office.

What We Offer:

- Competitive salary and benefits.

- Opportunities for professional development.

- Dynamic and supportive work environment.

- Chance to work with a leading company.

Perks & Benefits

• Employee equity
• Commission and bonus
• Casual dress code
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities

Job Title: Sales Engineer/Executive

Company: R&Y Engineering And Construction Sdn Bhd

Location: Seri Kembangan, Selangor

Employment Type: Full-time

Salary: Negotiable

Job Responsibilities:

- Identify and pursue new business opportunities.

- Develop and maintain client relationships.

- Provide technical support and solutions.

- Prepare and deliver technical presentations.

- Negotiate and close sales contracts.

- Collaborate with engineering and project teams.

- Monitor market trends and competitor activities.

- Prepare sales reports and forecasts.

Qualifications:

- Bachelor’s degree or Diploma in Engineering, Business, or related field.

- Proven sales experience in engineering or construction.

- Strong technical knowledge of EPCC services.

- Excellent communication, negotiation, and presentation skills.

- Ability to build and maintain client relationships.

- Self-motivated and goal-oriented.

- Proficient in CRM software and MS Office.

What We Offer:

- Competitive salary and benefits.

- Opportunities for professional development.

- Dynamic and supportive work environment.

- Chance to work with a leading company.

Perks & Benefits

• Employee equity
• Commission and bonus
• Casual dress code
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities