Total 28 product manager job vacancies in bayan lepas

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Key Responsibilities includes but not limited to,

Operations

• Manage and operate security systems (Security, Health and Safety Portal, CCTV, intrusion alarm, access control, etc.). 
• Coordinate timely completion of outstanding Security Corrective Actions / Preventive Actions with appropriate parties and communicate issues to the District Manager and Regional Security Manager/Director. 
• Be a part of the District Business Review meeting to discuss security-related issues, concerns, and best practices. 
• Coach employees and management on how to complete incident reporting per the Security Incident Reporting Standard. 
• Take the lead on all district security incident investigations, in coordination with Regional and CHQ Security. 
• Support Business Continuity Plan development and testing. 
• Supporting full implementation of Expeditors Health and Safety Standards. 
• Educating colleagues and Service Providers regarding safety to enhance an overall culture of safety in the face of potential resistance. 
• Supervise a group of outsourced security personnel in daily security operations.
• Serving as key point of contact for Operational Process Standards. 
• Managing Security, Health and Safety resources and tools (ex. the Portal). 
• Delivering Security, Health and Safety training (instructor-led courses). 
   

Compliance

• Promote compliance in diligently following all company policies and regulations and in being the role model of integrity and pride for all employees.
• Proactively communicate with the team to ensure continuous awareness and understanding of policies and regulations. 
• Ensure 100% branch compliance with all local Security, Health & Safety regulations, in coordination with any branch / external compliance officers.
• Ensure 100% branch compliance with all Operational Process Standards (“Expeditors Minimum Security, Health & Safety Standards”).

The Junior Managers Program (JMP) is Bosch’s accelerated development program designed to prepare high‑potential engineers for future technical and leadership roles.

The Automation & Smart Manufacturing track focuses on developing future leaders in automation, robotics, digitalization, and Industry 4.0, through hands‑on projects, cross‑functional rotations, and strong mentorship.

What’s in store for you?

• Rotate across Technical Functions (TEF) and Manufacturing with a strong focus on:
  • Automation & Robotics Engineering
  • Manufacturing / Production Engineering (automation focus)
  • Industrial Engineering & Process Optimization
  • Digitalization, MES, and smart factory initiatives
• Lead and support automation projects from concept, feasibility, to implementation
• Contribute to productivity improvement, cost reduction, and safety through automation
• Support industrialization and ramp‑up of automated production lines
• Work closely with manufacturing, engineering, and global automation teams
• Build leadership, communication, and project management capabilities through real business ownership

Role Overview

The Assistant Cost Manager will support the delivery of cost management services for a large‑scale advanced manufacturing facility construction project.

Working as part of a commercial team, this role will assist in managing cost planning, procurement, and financial control across CSA, MEP, and specialist systems within a highly technical, fast‑paced project environment. This is an excellent opportunity for early‑career professionals to gain exposure to mission‑critical and high‑tech construction projects.

Key Responsibilities

Cost Planning & Estimation Support

• Assist in the preparation of cost estimates, feasibility studies, and cost plans across different project stages.
• Support cost benchmarking and data analysis for key construction and engineering packages.
• Assist in providing cost input during design development and value engineering exercises.

Procurement & Tendering

• Support the preparation and issuance of tender documentation for CSA, MEP, and specialist works.
• Assist in managing tender queries, document control, and communication with bidders.
• Support tender evaluation through cost comparison, analysis, and reporting.

Post‑Contract Cost Management

• Assist in managing variations, change control processes, and cost tracking.
• Support the review of contractor progress claims and interim valuations.
• Maintain accurate cost records, logs, and financial documentation.

Reporting & Financial Control

• Assist in preparing cost reports, cash flow forecasts, and financial updates.
• Track project expenditure and highlight any potential cost risks or variances.
• Support compliance with project financial governance and reporting standards.

Technical & Project Coordination

• Work closely with project teams across CSA, MEP, and technical systems to support cost alignment.
• Assist in attending design, coordination, and site meetings.
• Support integration of cost information across engineering and construction activities.

Stakeholder Support

• Assist in liaising with project managers, consultants, contractors, and suppliers.
• Support effective communication and coordination across the project team.
• Provide administrative and commercial support to senior cost management staff.

Governance & Documentation

• Ensure all cost management documentation is accurate, complete, and up to date.
• Support adherence to project procedures, governance frameworks, and audit requirements.
• Contribute to capturing project data, lessons learned, and cost benchmarks.

Role Overview

The Cost Manager will be responsible for delivering full lifecycle cost management services for a large‑scale advanced manufacturing facility construction project.

The role focuses on ensuring cost certainty, commercial control, and value optimisation across complex construction works, including CSA, MEP, cleanroom environments, and process infrastructure. You will work in a highly technical, fast‑paced environment supporting the delivery of mission‑critical facilities to exacting quality and operational standards.

Key Responsibilities

Cost Planning & Pre‑Contract Services

• Prepare and manage cost estimates, feasibility studies, and detailed cost plans across all project stages.
• Provide cost advice during design development, including materials, construction methodologies, and high‑tech facility requirements.
• Support value engineering initiatives to optimise cost, performance, and constructability.

Procurement & Tender Management

• Prepare tender documentation for CSA, MEP, and specialist packages.
• Manage tender processes including tender clarifications, evaluation, commercial analysis, and recommendations.
• Support procurement strategies aligned with fast‑track and complex project delivery environments.

Post‑Contract Cost Management

• Manage variations, change control, and claim assessments throughout construction.
• Review contractor progress claims and certify interim payments.
• Maintain cost tracking, forecasting, and reporting to ensure alignment with approved budgets.
• Support final account negotiation and project close‑out.

Cost Reporting & Financial Control

• Prepare regular cost reports, cash flow forecasts, and financial updates.
• Identify cost risks, trends, and mitigation measures.
• Ensure compliance with project financial governance and reporting standards.

Technical & Project Coordination

• Work closely with project teams across CSA, MEP, cleanroom, and process system scopes.
• Support coordination between engineering, construction, and procurement functions.
• Provide commercial input during design coordination and site meetings.

Stakeholder Management

• Liaise with clients, consultants, contractors, and internal teams to ensure alignment on project objectives.
• Participate in key project meetings and contribute to decision‑making from a commercial perspective.

Governance & Risk Management

• Ensure compliance with project controls, procedures, and audit requirements.
• Identify and proactively manage cost and commercial risks.
• Maintain accuracy and transparency in all cost management deliverabl

The Payroll Manager – Asia Pacific (APAC) will lead a team of up to 10 overseeing payroll operations working closely with outsourced partners across multiple countries in the region.   

The role will be the escalation point for complex payroll issues and ensure strict adherence to local labour laws and tax regulations.  Responsible for ensuring accurate, timely, and compliant payroll delivery while supporting tech‑industry demands such as global mobility, equity compensation, scalable processes, and high‑growth workforce expansion. Partnering closely with HR, Finance, Compensation and Benefits, Global Mobility, and external vendors (Dayforce and EX3 who manage our Employee Central Payroll) to deliver a world‑class payroll experience in a dynamic and innovative environment.

1. Strategic Regional Leadership

• Define and execute the regional payroll strategy that supports rapid scaling, new country expansion, harmonisation and merging of entities and evolving tech‑industry regulatory requirements.
• Serve as the senior payroll advisor to People/HR leadership, Finance, and executive teams on APAC payroll matters.
• Anticipate business needs in a high-growth, high-change environment and proactively adapt processes.
• Leading on payroll projects including acquisition integration, systems implementation, migration and continuous improvement activities

2. Governance, Controls & Compliance

• Ensure team awareness and understanding of latest payroll policies, updates in legislation and procedures
• Own APAC payroll governance, ensuring all payroll activities adhere to internal controls, SOX, data privacy requirements, and audit expectations.
• Maintain deep knowledge of country-specific payroll, tax, social insurance, and labour regulations across APAC’s diverse markets.
• Partner with Legal, Security, and Compliance teams to meet GDPR/APAC data protection standards, including handling sensitive employee data securely.

3. Payroll Operations Oversight

• Oversee end-to-end payroll operations across multiple APAC countries, delivering accurate and timely payroll for tech employee populations (full-time, contractors, interns, remote/hybrid workers).
• Coordinate year-end payroll processes, including tax reporting, annual statements, and compliance filings for each country
• Manage complex payroll cycles involving Global Mobility, RSUs, ESPP, bonuses, sign-on awards, retention plans, and variable pay common in tech compensation.
• Review and sign off on payroll reconciliations, general ledger journals, funding, variance reports, and statutory filings.

4. Vendor Management

• Lead relationships with regional and in-country payroll vendors
• Evaluate and implement new payroll models as the company expands into new APAC markets.
• Drive performance reviews, SLA monitoring, and contract negotiations.

5. Technology, Automation & Innovation

• Champion payroll automation, system optimization, and integration with HRIS/Finance platforms (SAP SuccessFactors, and Success Factors Payroll (ECP)
• Partner with IT, HRIS, and Product teams to streamline workflows, integrations, data flows, and reporting.
• Support digital transformation initiatives such as self‑service, real‑time analytics, and centralized dashboards.

6. People Leadership

• Lead and manage a regional team of payroll professionals, providing mentorship, performance feedback and career development opportunities (currently based in Taiwan and Malaysia),
• Foster a culture of operational and customer excellence, innovation, and continuous learning. 
• Provide a supportive environment that promotes problem solving through root cause analysis and identification of standard ways of working
• Ensuring adaptability within the team to provide back ups and succession planning
• Promote collaboration with our global operations hub

7. Stakeholder & Employee Experience Management

• Act as the senior escalation point for complex payroll queries and executive-level cases
• Partner with Total Rewards on equity vesting events, stock transactions, and tax treatments
• Work with Global Mobility on cross‑border assignments, remote worker arrangements, and complex tax obligations
• Communicate payroll changes clearly in a fast-paced technology environment where transparency and employee trust are critical

8. Managing budgets for Payroll costs in APAC region

• Monitoring YTD spend against budgeted costs
• Raise Purchase requisitions as necessary

• To assist engineers to perform engineering related tasks such as buyoff on hardware, test program, equipment setups, etc.
• To perform qual related tasks such as repeatability tests
• To perform reject low yield or RMA verifications and sampling test based on special requests with engineer’s guidance

Job Summary
1.1 Physical logistic tasks of receiving, warehouse and shipping.
1.2 Interact with cross functional team within Plant and Bosch.
1.3 Interact with external parties – Logistics Service Providers, Liners etc.
1.4 Ensure the warehouse operates at peak efficiency, with customer satisfaction being the primary goal, by supervising, organizing, directing, and training warehouse employees and establishing, monitoring, and managing operation goals.

Job Scope
2.1 Responsible for the physical logistic tasks of receiving, warehousing, and shipping to ensure the quality objectives and delivery deadlines are met
2.2 Responsible for the accuracy of inventory with physical counts and reconciliation
2.3 Safeguards warehouse operations and contents by establishing and monitoring security procedures and protocols.
2.4 Ensure compliance with health and safety legislation
2.5 Manage overall LOM performance results with coaching, counseling, and disciplining associates, planning, monitoring, and appraising job results.
2.6 Achieve financial objectives and prepare annual budget, expenditures, analyze variances and corrective actions.
2.7 Lead and participate actively in Bosch Production System (BPS) related activities.
2.8 Support and prepare management reporting as and when necessary.
2.9 Any other duties assigned by the immediate superior from time to time.

Develop, maintain, and manage Expeditors world-wide activity with one of our industry-leading, top global customers to achieve optimum business retention and development. Ensure that customer's cross-functional and geographical operational requirements are proactively identified and serviced. Act?as the chief revenue growth champion and orchestrator for global strategic business planning and execution by leveraging global relationships, your industry knowledge, and Expeditors product, geo, and service leadership. Deliver world class business reviews and workshops tailored to your customer that drive further collaboration between Expeditors and the customer with a focus on value creation and cost reduction as measured through business intelligence. Drive alignment and co-collaboration efforts in multiple geo's to identify customer's top supply chain priorities and challenges. Work with Expeditors senior executives and product & geo management to create value-add solutions that are timely and relevant to the customer's ecosystem. Increases Expeditors' revenues and profitability through providing enhanced valued-added service.

SCOPE OF POSITION

To create a unique Expeditors customer experience through total ownership of and accountability to:

• Understand global customers' profile, needs and expectations.
• Retain existing business and continuous pursuit of global business development.
• Create a strategic and mutually beneficial relationship for Expeditors with the customer worldwide

REPORTING STRUCTURE

Customer Retention and Development Manager

Sustaining Staff Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA).  

Sr Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA). 

Analog and Mixed Signal Business Unit (AMS) is looking for a Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers
• Provide support for DfT, Product releases and Qualifications in Penang
• Compliance to Jedec and AEC standards
• Datasheet and automotive compliance reports
• Real time customer support for design, product and quality related issues
• Temperature/Voltage/Process characterization and production limit setting
• Product new product introduction and yield ownership
• Product BOM release and maintenance
• Excursion management for both suppliers and customers
• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams
• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times
• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

Staff Product Engineers Logistic will be a critical part of our sustaining team, ensures product continuity after mass production.  We are seeking a Product Engineer who has strong back ground in Product Engineering. This role is crucial to ensure execution of sustaining projects and also proactively monitor production supply chain.  The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, and extend product lifecycle.

Key Responsibilities

•  Manage and maintain BOM system.  This will be a crucial on-going task to ensure production system operates flawlessly.  Candidate will be trained to generate and mainitain BOM of all PCP products in new Renesas system.
• Sustain multiple products lifecycles, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Generating and monitor engineering build requests to support qualification/validation builds and customer samples.
• Generate weekly yield/variance monitor report and recommend actions.
• Generate and monitor SBL/SYL updates
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Work with several data base system to generate useful reports to help drive sustaining team productivity. 

RESPONSIBILITIES

BROAD FUNCTIONS:

• Responsible for smooth operations of the plant utilities system
• Coordinate and provide support to production / manufacturing needs
• Coordinate and execute Facilities cost saving & improvement programs
• Ensure all the subscribe system are maintained
• Lead and liaise with relevant local government agencies & contractors
• Lead and develop direct reports

Regular

• Oversee and lead the team to establish procedure, system monitoring & preventive maintenance to ensure smooth operation
• Identify system weakness and implement improvement/enhancement project to ensure smooth operation
• Lead facilities operation team to support production / manufacturing needs
• Lead facilities operation team in review & analyse the operating data to optimize the Facilities operating system
• Plan, supervise and lead the team in execute cost saving & improvement program
• Control operating expenses to ensure within budget
• Ensure compliance to IMS, ISO9000, ISO14000, Contamination Control, Housekeeping & Safety
• Liaise with contractor, consultant on the facilities related matters
• Lead and develop direct reports through hands-on and proper training.
• Carry out special task as assigned by Senior Manager/ Dept. Head
• Support the activities to the company needs

• Perform all tasks assigned by the immediate superior in accordance to the specifications and schedule.
• Plan and organize use of resources effectively to meet OEE, productivity, internal failure cost target.
• Work with all levels of the organization to improve quality levels, providing customer with “Zero Defect Product” and “100% On-Time Delivery”.
• To translate the company’s objective into department goals and ensure the goals are cascaded to Production line leader and operator levels.
• Create an environment that is culturally embedded in a “Quality First” mentality.
• To maintain records for all downtime and to clinically analyze the lost opportunity for improvement.
• To initiate project, evaluation and study for capacity and quality improvement.
• To follow up and summarize the entire pilot builds failure into “OPEN POINT LIST”.
• Instill a continuous improvement mentality to production line leader and operator level.
• Establish performance indicators and evaluate production line leader and operator level.
• To Lead “CIP” production daily management meeting.
• To liaise with TEF group for improvement.
• To perform the production line process confirmation.
• To provide support and guidance to line leaders, technicians and operators on their daily tasks.
• To ensure production line leaders, technicians and operators follow quality control procedure and all the BPS activities and procedures.
• Review line leaders, technicians and operators performance on quarterly basic and provide Guidance to improve his/her performance.
• Coordinate and follow up various departments to ensure smooth execution day to day activities.
• Responsible for year end physical inventory count.
• Enforce safety and 5’S activity assigned by superior.
• To evaluated and prepared year end GPD for subordinates.
• Any other duties assigned by the immediate superior from time to time.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Product Engineering or Program Management
• Lead internal team for NPI and Sustaining Products qualification and continuous improvement activities to meet product requirements.
• Involve heavily in collaboration with other functions and departments to achieve goals.
• Data analysis skills for processes and products correlation.  

Key Responsibilities

• Act as Plant Product Owner for assigned product families from manufacturing stage through end-of-life (EOL).
• Serve as the main interface between Plant and Development for all product-related HW/SW issues.
• Drive First Pass Yield (FPY) performance and implement continuous improvement actions to meet targets.
• Lead root cause analysis and problem-solving activities for production and quality issues (e.g., FOR, field returns, 0km defects).
• Take ownership as Task Force Leader for critical product or process issues, coordinating cross-functional resources.
• Support failure analysis (FA) activities and collaborate with teams to define effective diagnostic tools.
• Transfer product know-how from development to plant during industrialization and ensure smooth product ramp-up.
• Participate in new product development (NPD) phases to incorporate plant lessons learned and prevent recurring issues.
• Provide technical risk assessments and decision justification for quality-related concerns.
• Lead and support cost improvement initiatives (e.g., RPP, IDC) to achieve plant and corporate targets.
• Develop and implement engineering and automation solutions to improve efficiency and reduce scrap.
• Ensure manufacturing readiness through line buy-off, release, and validation activities.
• Conduct technical training for production technicians and engineers.
• Collaborate with internal teams, contract manufacturers (CM), and stakeholders to achieve operational goals.
• Support data analysis and reporting (e.g., SQL queries, technical presentations) for management and customers.
• Provide support in sample builds, testing, and evaluation activities during early product phases.
• Perform additional duties as assigned by management.

1. Product Lead overseeing Media programs from qualification through mass production and end-of-life. Primary interface between internal cross-functional teams and external customers to deliver on-time product launches and production ramp readiness.
2. Leads new and iteration program qualifications, ensuring critical product parameters, specifications, and documentation are fully defined to support smooth qualification builds and volume ramps. Applies data-driven KPIV/KPOV analysis to improve process control, yield, and product margin.
3. Manages programs, including engineering sample logistics, shipment execution, head/media pairing, and supply planning to achieve optimal HDD yield. Drives continuous improvement initiatives with internal stakeholders and external partners (HDD) to ensure sustained product quality, margin, and operational excellence.

Junior Managers Program is a program designed to groom potential future management staffs who is able to contribute to the success of the company. This is an 18 to 24 months program which you will be assigned to different functions within the organization or complete requires assignments in your functional area which could include one assignment abroad. This will give you the breadth of experience and exposure to help you move into the management role in mid to long term within the assigned division.

What’s in store for you:

• Systematically develop your leadership and decision-making skills through multifaceted involvement in projects as well as in day-to-day business;
• Benefit from the in-depth guidance of an experienced mentor and senior executives, including regular feedback; and
• Gain international experience during an assignment abroad.

The Program Manager will lead the technical and operational readiness for a new manufacturing facility, driving equipment installation, process setup, qualification, and production ramp. This role ensures the factory achieves safe, efficient, and high-quality output through strong cross-functional coordination and engineering leadership.

Key Responsibilities

1. Factory Start-Up & Ramp Execution
• Lead end-to-end engineering activities for new factory setup (facility readiness, equipment installation, and commissioning)
• Drive qualification processes  to ensure production readiness
• Establish and execute ramp plan to meet output, yield, and quality targets
• Identify and mitigate technical risks during start-up phase

2. Process & Equipment Engineering
• Define, develop, and optimize manufacturing processes
• Oversee equipment selection, installation, calibration, and validation
• Ensure process capability (CPK), cycle time, and efficiency targets are achieved
• Implement continuous improvement initiatives to enhance productivity and yield

3. Cross-Functional Coordination
• Act as primary engineering interface with Operations, Quality, Supply Chain, Facilities, and EHS
• Align timelines and deliverables across teams to meet ramp milestones
• Support supplier engagement and technical issue resolution

4. Team Leadership & Capability Building
• Build, lead, and develop a high-performing engineering team
• Define roles, responsibilities, and performance expectations
• Coach engineers on problem-solving, root cause analysis, and technical skills
• Foster a culture of ownership, accountability, and collaboration

5. Quality & Compliance
• Ensure compliance with internal standards and external regulations
• Drive root cause analysis and corrective/preventive actions (CAPA)
• Support audits and ensure documentation readiness

6. Safety & Risk Management
• Promote a strong safety culture and ensure adherence to EHS requirements
• Conduct risk assessments for new processes and equipment
• Ensure safe startup and operation of all systems

⸻

Key Deliverables / KPIs
• On-time factory readiness and successful production ramp
• Yield, throughput, and cycle time targets achieved
• Equipment uptime and process capability metrics
• Zero major safety incidents
• Team capability development and retention

Position Overview

Lead strategic sourcing initiatives for critical capital equipment across Western Digital's global manufacturing operations, driving cost optimization, supply continuity, and technology innovation in alignment with WD's operational excellence and business objectives.

Key Responsibilities

Strategic Sourcing Leadership

• Develop and execute comprehensive sourcing strategies for capital equipment portfolios (wafer fabrication, HDD/SSD manufacturing, test equipment) supporting $XXM+ annual spend • Lead cross-functional teams in supplier selection, negotiation, and contract execution for high-value capital investments • Drive Total Cost of Ownership (TCO) optimization through strategic supplier partnerships and innovative commercial models • Establish multi-year sourcing roadmaps aligned with WD's technology roadmap and capacity expansion plans

Supplier Relationship & Risk Management

• Build and maintain strategic partnerships with Tier-1 OEMs and equipment suppliers in semiconductor and storage industries • Implement robust supplier performance management systems tracking quality, delivery, technical support, and innovation • Develop supply continuity strategies and risk mitigation plans for critical single-source equipment • Lead supplier business reviews and drive continuous improvement initiatives

Commercial Excellence & Value Creation

• Negotiate complex multi-million-dollar capital equipment agreements, including pricing, payment terms, warranty, service, and IP considerations • Structure creative commercial arrangements (consignment, lease-to-own, performance-based contracts) to optimize cash flow • Drive standardization and commonality initiatives to leverage scale and reduce total cost • Identify and capture cost savings opportunities through value engineering, should-cost analysis, and competitive benchmarking

Cross-Functional Collaboration

• Partner with Engineering, Operations, Finance, and Legal teams on capital planning, equipment specifications, and investment justifications • Support new product introduction (NPI) and technology transitions with timely equipment procurement • Collaborate with Global Operations on supplier qualification, installation, and ramp activities • Interface with Export Control and Trade Compliance on regulated equipment sourcing

Team Leadership & Development

• Lead and mentor sourcing team members, fostering professional development and category expertise • Establish sourcing best practices, processes, and tools to drive efficiency and compliance • Champion digital procurement transformation and adoption of advanced analytics

Analog and Mixed Signal Business Unit (AMS) is looking for a Snr Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities:

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers

• Provide support for DfT, Product releases and Qualifications in Penang

• Compliance to Jedec and AEC standards

• Datasheet and automotive compliance reports

• Real time customer support for design, product and quality related issues

• Temperature/Voltage/Process characterization and production limit setting

• Product new product introduction and yield ownership

• Product BOM release and maintenance

• Excursion management for both suppliers and customers

• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams

• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times

• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

Job Summary
Role
1.1 MT Product Purchasing Buyer for related MT Product Group(s) in PgP2 along the complete Product Life Cycle (incl. product relocation).
1.2 MT Purchasing Strategy-, Quality- and Target Cost responsibility and accountability for MT Product Groups in PgP2.
1.3 MT contact interface to Material Field purchasing (Commercial, Quality). Assure aligned messages for the related Product Group from MT to the Material Field Purchasing.
1.4 Escalation in the MT-Pg for Purchasing related issues (commercial, quality, logistics).
1.5 Prepare aligned MT-Pg Product Group Purchasing Strategy for PT-MT/PPU

Job Scope
2.1 Definition & Maintenance of a Product Group Purchasing Strategy considering TTM and Value Stream targets of MT-PgP.
2.2 Product Group interface from Purchasing to MT.
2.3 Leading and responsible for the RPP activities in the respective Product Group (creation, implementation, cooperation cross-functionally) at PgP location.
2.4 Early Supplier involvement in PIF to support Product Innovation and Target Cost Achievement (PILUM).
2.5 Support Annual Price Negotiation by providing new potential business opportunities of Product. Group in pipe-line.
2.6 Challenge and support Material Field buyers to achieve Best Material Field Costs
2.7 Support Material Field Buyers for contracting (e.g. SE-contracts, NDA, Concept Competition etc.)
2.8 Create transparency of costs of Product Group by benchmarking (support the Global Product Champion).
2.9 Responsible for achievement of Best Costs in Product Group (Benchmarking, TCO, RPP) before / after SOP.
2.10 Responsible for Product Group related quality activities (e.g. ISIR, 8D, PQA, etc.)
2.11 First escalation level for Quality and Logistics related supplier issues from Plant.
2.12 Takes care of purchasing related topics/tasks in the Value Stream.
2.13 Ad-hoc tasks as assigned from time to time.
 

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.