• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for product development and high volume SSD manufacturing is desired.
• Perform manufacturing yield evaluation and data analysis for yield improvement.
• Responsible for prepare, validate and release test package to Agile system.
• Responsible for Failure Analysis of products to meet yield goals and quality targets.
• Interfaces with core team (FW/HW) as well as internal team to solve problems.
• Ability to work with various departments to facilitate the orderly execution of a proposed project plan.
• Participate & contribute in tester/infrastructure and process improvements.
• Ability to read the electrical schematic diagram is an advantage.
• Work closely with departments within the company to ensure product able to meet the delivery timeline.
• Ability to work independently with minimum supervision. 
• Ability to provide guidance to teammate.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

About You

You will own and enhance SEEK’s back-office and identity platforms, with a primary focus on Microsoft 365 and related services, ensuring they are secure, highly available and aligned to our cloud-first strategy.

Based in Kuala Lumpur with 2–3 days a week working from home, you will act as the senior technical escalation point, driving infrastructure projects across data centre, AWS and Azure environments, while mentoring teammates and influencing how we deliver enterprise services at scale.

What You Will Do

• Implement, configure, support and tune high-availability back-office systems in a secure environment.
• Manage and support identity and collaboration platforms including Microsoft 365, Azure AD, Active Directory, Okta and related services.
• Configure and support infrastructure services such as AD, DHCP, DNS and mail systems across multiple regions.
• Drive and deliver key infrastructure projects and technical initiatives across datacentre, AWS and Azure platforms within agreed timeframes.
• Leverage IaaS, SaaS, PaaS and Infrastructure as Code to automate and improve capacity, availability, performance and configuration management.
• Identify risks to service and availability, design mitigations and ensure SLAs are consistently met for IT systems and services.
• Mentor and train team members, provide technical guidance, and act as the go-to escalation point for complex system issues, including occasional on-call support. 

We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that support the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies, making us a leading and trusted partner every step of the way.

We are expanding our Subsea Pipelines capability in Malaysia and are seeking a Project Engineer to support both the delivery of projects and the growth of our regional presence.

This is a hands-on, delivery-focused role with exposure to project execution and client-facing activities, offering the opportunity to develop into a broader, commercially aware position.

Working closely with operations, clients, and regional leadership, you will support the safe and efficient delivery of subsea pipeline and pre-commissioning projects across Malaysia and the wider APAC region.

Key Responsibilities

• Support the execution of subsea pipeline and pre-commissioning projects from planning through to offshore delivery
• Coordinate mobilisation of personnel, equipment, and vessels to ensure efficient project execution
• Deliver and support activities across:
• Subsea pipelines and SURF operations
• Pigging and pipeline cleaning
• Pre-commissioning and commissioning services
• Umbilical and riser testing and flushing
• Nitrogen dewatering and FCGT (Fill, Clean, Gauge & Hydrotest)
• Subsea pumping and testing units
• Assist in pipeline engineering scope including calculations, testing, integrity, and system readiness
• Support tendering activities including technical evaluations, cost inputs, and proposal development
• Interface with clients on technical delivery, with exposure to business development and tender support
• Ensure compliance with HSE, quality, and operational standards at all times
• Support preparation of technical proposals, project documentation, and execution plans

Requirements

• 10+ years’ experience within subsea / pipeline / pre-commissioning environments
• Strong technical understanding with a willingness to be hands-on
• Dewatering with Nitrogen Membrane spread and Coil tubing experience would be ideal.
• Experience in tendering, technical calculations, and project execution
• Good knowledge of the local Malaysian supply chain and vendor landscape
• Project execution experience in Indonesia is an added advantage
• Good communication skills with the ability to engage clients and stakeholders
• Exposure to business development or client interaction is an advantage
• Fluent English (spoken and written)

Profile

• Ideally, a technically strong candidate with an outgoing, client-focused personality, capable of building and maintaining strong customer relationships

Diversity & Inclusion

EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

LOCATION: Selangor, Malaysia (Puchong Financial Center, PFCC)

REPORTING LINE: Group IT Service

PURPOSE OF THE POSITION:

We are seeking a proactive IT Support Engineer to join our team in Malaysia. The role will provide exceptional technical support for software and hardware systems across Southeast Asia (SEA).

Additionally, as part of our global ticketing team, you will contribute to the "follow the sun" support model, facilitating continuous IT system operations - Windows Servers and computers with full Microsoft Collaborative suite: Office 365 application stack (Teams, Word, Excel, Onedrive, Powerpoint) and SAP ERP as an application backbone across different time zones.

MOBILITY: 10-15% of time

RESPONSIBILITIES:

1. Technical Support:
   • Provide first and second-line technical support for software and hardware issues.
   • Respond to and resolve support tickets in Southeast Asia. Countries coverage scope could be reviewed and extended.
   • Troubleshoot and resolve IT system issues, ensuring minimal downtime to user.

1. Part of Global Ticketing Team:
   • Collaborate with international colleagues in the global ticketing team.
   • Provide follow-the-sun support to ensure seamless IT operations across different time zones.
   • Manage and prioritize support tickets, ensuring timely resolution accordingly.

1. System Administration:
   • Maintenance of IT infrastructure, including servers, networks, and communication systems of Staubli units in the region.
   • Implement and oversee security protocols to protect organizational assets.
   • Conduct routine system checks and updates to ensure optimal performance.

1. Stakeholders Interaction:
   • Build strong relationships with key stakeholders to understand their needs and provide tailored support solutions.
   • Conduct training sessions for end-users to enhance their understanding of IT systems and technologies.

1. Documentation and Reporting:
   • Maintain accurate records of support activities and interactions.
   • Generate regular reports on support ticket trends and performance metrics.
   • Contribute to the creation of technical documentation and user guides

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities
• Taking charge of tribology testers maintenance, spare parts inventory management and hardware upgrading activities 

Sustaining Staff Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA).  

Staff Product Engineers Logistic will be a critical part of our sustaining team, ensures product continuity after mass production.  We are seeking a Product Engineer who has strong back ground in Product Engineering. This role is crucial to ensure execution of sustaining projects and also proactively monitor production supply chain.  The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, and extend product lifecycle.

Key Responsibilities

•  Manage and maintain BOM system.  This will be a crucial on-going task to ensure production system operates flawlessly.  Candidate will be trained to generate and mainitain BOM of all PCP products in new Renesas system.
• Sustain multiple products lifecycles, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Generating and monitor engineering build requests to support qualification/validation builds and customer samples.
• Generate weekly yield/variance monitor report and recommend actions.
• Generate and monitor SBL/SYL updates
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Work with several data base system to generate useful reports to help drive sustaining team productivity. 

Analog and Mixed Signal Business Unit (AMS) is looking for a Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers
• Provide support for DfT, Product releases and Qualifications in Penang
• Compliance to Jedec and AEC standards
• Datasheet and automotive compliance reports
• Real time customer support for design, product and quality related issues
• Temperature/Voltage/Process characterization and production limit setting
• Product new product introduction and yield ownership
• Product BOM release and maintenance
• Excursion management for both suppliers and customers
• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams
• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times
• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

Sr Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA). 

• Specifically to carry out process capability and development programs related to Lube Process
• Carry out Lube Cpk, instruments’ EMP and Gauge R&R improvement activities
• Process transfer for new products implementation
• Plan and implement cost improvements or savings for Lube Process
• Yield/Defect/Quality improvement
• New software and project propagation buy off
• Synergy with ETA for new equipment development
• Machine PPH Improvement via process development and improvement
• Assist second source development for Lube Process
• Maintain and establish documentation and FMEA leadership for Lube Process
• New Equipment Qualification
• Continue support ACD Process
• Conduct training for new engineers and cross site teams who need to understand Lube Process.
• Subject Matter Expert for Lube Process.

Job Description

Essential Responsibilities:

• Analyze reject disks using microscopes and advanced equipment (AFM, SEM EDX, Wyko, Zygo, OSA) to identify and classify defects.
• Interpret defect analysis results, including SEM EDX data, and compile failure analysis reports.
• Lead discussions with process owners on defect issues and work to address unknown defects.
• Track and monitor yield performance using EIS and Spotfire, including viewing iris mapping and disk quality performance (KPOV).
• Coordinate with FA Tech to ensure correct reject disks are pulled for analysis.
• Develop and implement corrective and preventive actions (CAPA) to improve defect rates.

As a QA Engineer you will be supporting the development teams by ensuring the quality of their output through a combination of manual and automated testing.

Who we are

Trade Nation is a global CFD and spread betting broker. We help traders make better decisions through clear market insights, transparent pricing and fairer approach to trading.

Since 2014, we’ve grown into a market-leading, low-cost broker with our headquarters in London and offices across Europe, South Africa, Asia-Pacific, and key offshore regions including the Caribbean and Indian Ocean. Our platform is available in 14 languages, making it accessible to traders worldwide.

Built on transparency and trust, and driven by our people, our focus is simple: helping customers trade more effectively. We do that by keeping costs low, cutting unnecessary complexity and using technology to put traders first.

Your team

Our Kuala Lumpur office is a bright, modern space located at the heart of the city. The team here is expanding, making it our second-largest hub, and we’re excited to welcome like-minded individuals to join an exciting, collaborative environment filled with professionals who have a passion for innovation and driving change.

Our commitments to each other

We have each other’s backs

There when we need each other most

 We challenge each other

Be more creative, more curious, more bold

We thrive together

Taking our work to the next level

We form strong bonds

Through team building and social events

We don’t judge

Instead, we teach and are open to learning

We step up

Taking ownership and supporting each other to do the same

Key Responsibilities:

• Collaborating with cross functional teams to understand product features and architecture.
• Deriving meaningful test scenarios based on business requirements and system workflows.
• Performing functional, regression, integration and end-to-end testing on tasks and epics.
• Developing and maintaining an up-to-date regression pack to ensure ongoing testing of critical functionalities.
• Writing, executing, and maintaining test cases for automation.
• Assisting in bug reproduction, investigation and work with developers on root cause analysis.
• Maintaining test scripts to run in CI/CD environment.
• Promoting delivery of quality software.
• Communicating effectively on progress and ensure impediments are raised early to minimise impact on the delivery.

• Proven experience in quality assurance across automated and manual testing within software development with at least 3+ years of experience.
• Should have 2+ years’ experience in front-end, API and end-to-end testing.
• Develop and maintain automated scripts using tools like Playwright, Cypress, K6 and Postman.
• Strong preference for experience in scripting language such as TypeScript, JavaScript.
• Skilled in using CI/CD tooling such as GitLab, TeamCity etc
• Experience using Jira or similar project management tool.
• Maintain and enhance test documentation including test scenarios and bug reports.
• Excellent attention to detail, highly organised with a proactive and independent approach.
• Capable of working on multiple tasks simultaneously and managing deadlines.

Preferred Qualifications

• Relevant testing qualifications such as ISTQB, Agile software testing courses.
• Experience with Playwright using Typescript language.
• Experience in API testing using Postman or similar tools.
• Good to have knowledge in C#
• A positive attitude with the ability to work independently and as part of a team.
• Knowledge of Agile methodologies and experience working in an agile environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Maximize wire bond process capability to handle wide range of product portfolio.
• Drive for Wire Bond process yield improvement and monitoring.
• Drive for Wire Bond related test QDN investigation and improvement plan.
• Drive for wire bond related improvement projects.
• Hand-sake with NPI team on new technology / product / wire bond methodology transfer to mass production.
• Liaise and work with equipment team on equipment related improvement and new machine qualification.
• Project management in project related to wire bond yield improvement, cost saving and process efficiency.

Role Purpose

The Software Engineering Team Lead provides hands-on technical leadership and delivery ownership for a squad of junior engineers, aligned to Experian’s Product Development career framework. This role focuses on engineering execution, technical direction, and team enablement rather than people management or HR administration.

Key Responsibilities
Technical Direction & Quality: Provide architectural guidance, conduct design and code reviews, and champion CI/CD, observability, and secure-by-default practices.

Mentorship & Capability Building: Coach junior engineers, maintain team playbooks, and foster a culture of craftsmanship and learning.

Collaboration & Stakeholder Partnership: Partner with Product and Project Managers and collaborate with Line Managers on staffing and growth (no HR ownership).

Get to Know the Team

The DevTools Team builds and hosts internal platforms that help thousands of Grab engineers measure, monitor, and improve how they build software. Our flagship product, Engineering 360, is Grab's unified metrics platform — the single place where engineering leaders and individual engineers track productivity, code quality, system stability, and DORA signals across the company.

Get to Know the Role

We are seeking a Full Stack Developer Intern to work closely with our development team on building and maintaining Engineering 360 and related internal platforms. As part of this role, you will be exposed to both front-end and back-end development. Our tech stack includes React and JavaScript/TypeScript in Front-end, and Golang on the Backend. Apart from this, you will also be exposed to managing and building data streams and pipelines that power engineering metrics across Grab.

This is a fully onsite role, that will be based in our office at Petaling Jaya

The Critical Tasks You Will Perform

• You will work with the development team to build and maintain our internal engineering platforms.
• You will participate in the full software development lifecycle, from requirements gathering to deployment and maintenance. We follow an agile methodology with a 2-week Sprint.
• You will write clean, maintainable, and efficient code.
• You will troubleshoot and debug web applications and data pipelines.
• You will participate in code reviews and provide constructive feedback to other team members.

Lead the Quality Assurance process to ensure the achievement of quality compliances and customer satisfaction. Provide Quality Assurance support and coordinate in resolving potential issues.

Key Responsibilities

• Facilitate Customer Quality Issues and Internal Quality issues to drive Corrective & Preventive Actions.
• Facilitate Quality Planning Process [PFMEA, Control Plan, Measurement System Analysis, Quality Gate] for new process setup.
• Monitor Quality KPIs and coordinate Continuous Improvement activities.
• Analyze, compile, review Quality Metrics, and timely communication to stakeholders.
• Perform Quality Audits to ensure compliances, process effectiveness, and elimination of Quality Risks.
• Coordinate Change Control, RMA, SPC implementation and Quality Training activities 

• Requirements Analysis and Design - • Attend and contribute to discussions and backlog refinement. • Translates functional requirements into technical requirements. • Contribute ideas and estimates of tasks and risks in alignment with process and team standards. • Proactively contributes ideas for technical design.
• Development - • Implement correct, performant and reliable code on schedule • Investigate and fix defects. • Define and create automated tests at all levels. • Run the automated test suite, analyzing and triaging the test results. • Ensure that code created is of the required quality standards.
• Test Automation & DevOps - • Implement test automation script and pipeline. • Maintain and monitor the result of the automation • Improve test automation whenever possible. • Implement devops change to support product and test pipeline development.
• Deployment - • Provide support to implement and operations teams to install/upgrade and maintain delivery environments • Support developing and maintaining CI/CD pipelines Agile Teamwork - • Participate actively in all Agile meetings • Collaborate with teammates effectively to achieve the team's goals and objectives. • Provide constructive feedback as part of the established performance review process. • Support and coach more junior team members.

Get to Know the Team

You will be joining the Metadata & BI Platforms team within Grab's Data Engineering Platforms department. The team builds and maintains the systems that power Grab's data intelligence: Hubble (data discovery platform), Genchi (data observability platform), Superset and Power BI (business intelligence platforms), and the Data Agent (agentic analytics platform).

We work at the intersection of data engineering and AI, building systems that help thousands of internal users across Grab discover, understand, and act on data. The team is passionate about applying the latest AI advances to make data more accessible, intelligent, and useful at scale.

Get to Know the Role

As an AI Engineer Intern, you will contribute to building and improving AI-powered data platforms that make data discovery, observability, and analytics smarter and more intuitive at Grab. You will get hands-on experience building production-grade systems — from LLM integrations and agentic workflows to vector search pipelines — alongside engineers who ship AI features at scale.

This is a high-impact role where your contributions will be used by real internal users across the company. You will work in a fast-paced, collaborative environment with mentorship from experienced engineers, gaining exposure to the full AI product development lifecycle from design to deployment.

The Critical Tasks You Will Perform

• You will design and implement backend services and APIs that support AI-driven data platform features.
• You will integrate LLM APIs into platform workflows to enable intelligent automation and natural-language capabilities.
• You will contribute to building and orchestrating agentic systems (e.g., using LangGraph) for use cases such as data troubleshooting, SQL/code generation, and data Q&A.
• You will develop and optimize vector search and RAG pipelines to improve data retrieval and semantic understanding.
• You will debug and resolve performance or reliability issues in complex data systems, working toward production readiness.
• You will Collaborate with product managers, data engineers, and data analysts to deliver high-impact features.

Get to Know the Team

The ACE team is responsible for all of food, mart, dine out and reservation business. We use a microservice architecture in backend, and frontend tech stack use including (iOS, ADR, Flutter and Web). We often do platform abstraction to support our new our requirements to go online faster.

Get to Know the Role

This role is for supermarket product testing and is required because we are supporting our fast-growing business. You will report to the QA Engineering Manager II and be based at Petaling Jaya, Malaysia.

The Critical Tasks You Will Perform

• You will define test plans, test specifications, test suites, test cases and proposed tools for functional, security and performance testing
• You will understand the product/feature in-depth from the end-user point of view and the underlying implementation.
• You will work with the Product Manager, Frontend, and Backend developers to understand the feature and the implementation to build feature tests and impacted feature test cases.
• You will debug failed test cases by analyzing logs and API responses and report bugs with details. Follow-up on bugs to closure.
• You will maintain UI (Web, Mobile app) and API automation suites. Debug and correct script and data issues in automation suites.
• You will understand automation framework and add automation test cases for the new features and regression test cases