Total 93 Project Engineer job vacancies in Penang

Qualification

• Diploma/Degree in Electrical & Electronics, Computer Science, Mechatronic 

Requirement

• Fresh graduate with or without experience are welcome
• Must possess own transport and willing to provide sales coverage on Nortern Region
• Good interpersonal & strong communication skills
• Willing to learn new products knowledge
• Enjoy working independently as well as delivering result collaboratively as team

Job Scope

• Promote automation industrial products (Servo Motor, Drive, Controller, Profile, Etc) with integrated bundle solution to existing customer and explore opportunities with new customers.
• Provide basic commercial & technical service for customers, also the sales & product enquires.
• Maximazing the "face to face" with the customer and support product and brand integrity requirement at customer locations.
• Meet or exceed individual sales plan.
• General and follow up on sales leads, ensuring timely and accurate communication with potential customers.

Rewards

• Sales commission
• Overseas/local products training

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities

Requirements :

• Education :  Diploma  or Degree  in  electrical  engineering.
• Skills : Electronic testing  design, electronic  systems, electronics  trouble shooting 
• Work Experience : Min 2 years’ electrical engineering  experience  others
• Job Requirement : Project Management, database design,  analyzing  information, reporting  research  results,  attention  to  detail
•  

Job Scopes:

• To design electrical panels, including selecting suitable components.
• To draw CAD drawing for electrical components, harness and panels.
• To draw electrical P&ID. 
• To prepare product reports by collecting, analyzing and summarizing information and trends. 
• To provide engineering information by answering questions and requests. 
• To keep equipment operational by following manufacturer’s instructions and established procedures. 
• To handle other tasks and duties as and when requested by superior.
• To assure product quality by designing electrical testing methods and testing finished products. 
• To confirm components’ capabilities by designing testing methods.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Personal development opportunities

要求 ：

• 教育背景：電機工程文憑或學位。
• 技能 : 電子測試設計、電子系統、電子故障排除
• 工作經驗 : 至少 2 年電機工程經驗
• 職位需求：專案管理、資料庫設計、分析資訊、報告研究結果、注重細節

工作範圍：

• 設計電氣面板，包括選擇合適的組件。
• 繪製電氣元件、線束和麵板的 CAD 圖紙。
• 繪製電氣 P&ID。
• 透過收集、分析和總結資訊和趨勢來準備產品報告。
• 透過回答問題和請求來提供工程資訊。
• 按照製造商的說明和既定程序保持設備運作。
• 根據上級要求處理其他任務和職責。
• 透過設計電氣測試方法和測試成品來確保產品品質。
• 透過設計測試方法來確認組件的功能。

津貼和福利

• 津貼（旅費、交通費等）
• 個人發展機會

We are seeking a highly organized individual with exceptional attention to detail and a structured approach to project management. The ideal candidate will demonstrate experience in managing small-scale global projects, adeptly navigating diverse time zones and cultural contexts. Additionally, they should possess a solid understanding of HR operations and processes, enabling seamless coordination and support across all aspects of the organization.

• Manage and oversee the entire project lifecycle, ensuring smooth execution and timely completion.
• Utilize SmartSheet and other tracking tools proficiently to maintain project documentation and facilitate collaboration.

• Machine Maintenance & Support: Manage and maintain front-line machinery such as Mounters, Dicers, Die bonders, and Wire bonders, providing critical troubleshooting support and ensuring smooth operations during significant downtimes.
• Operational Efficiency: Constantly monitor and optimize Overall Equipment Effectiveness (OEE) to ensure peak performance and identify potential improvements.
• Project Leadership: The project aims to enhance machinery performance and stability through effective problem-solving methodologies, ensuring initiatives align with business objectives and yield tangible benefits.
• Cross-Functional Collaboration: Work closely with the production, process, and PC departments to implement a comprehensive preventive maintenance program that minimizes disruptions and maximizes machine reliability.

• Machine Maintenance & Support: Manage and maintain front-line machinery such as Mounters, Dicers, Die bonders, and Wire bonders, providing critical troubleshooting support and ensuring smooth operations during significant downtimes.
• Operational Efficiency: Constantly monitor and optimize Overall Equipment Effectiveness (OEE) to ensure peak performance and identify potential improvements.
• Project Leadership: The project aims to enhance machinery performance and stability through effective problem-solving methodologies, ensuring initiatives align with business objectives and yield tangible benefits.
• Cross-Functional Collaboration: Work closely with the production, process, and PC departments to implement a comprehensive preventive maintenance program that minimizes disruptions and maximizes machine reliability.

Job  Responsibility:

• Process Engineering at Assembly Process
• Setup of new product which consist of document preparation to meet IATF requirements.
• Yield & quality improvement on assigned product types / process.
• Cost reduction projects in Assembly process in order to reduce overall product cost.
• To carry out investigation & propose corrective actions related to quality issue.
• To support Production delivery

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

Key Responsibilities:

- Design and development of mechanical parts include plastic injection molding tray, machining pallet, jig, fixture for SSD drive manufacturing, including conceptualization, prototyping, testing, and implementation.

- Analyze and improve existing manufacturing processes and equipment for better performance, cost-efficiency, and reliability.

- Collaborate with cross-functional teams, including production, quality assurance, and R&D, to integrate new technologies and methodologies into the manufacturing process.

- Conduct thorough risk assessments for equipment designs and processes, implementing preventive measures to minimize downtime and ensure safety.

- Manage equipment development projects, ensuring they meet timelines, budget constraints, and quality standards.

- Stay abreast of the latest trends and advancements in mechanical engineering and SSD manufacturing technology, incorporating innovative solutions into our operations.

- Provide technical guidance and mentorship to junior engineers and technicians.

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

POSITION SUMMARY:

In this position, the individual will be responsible for fully supporting the Department Manager on the development of the Company goals, strategy and tactics. The most important being the ability to work with the team to assure the good execution. The individual will work with the team to fully support the company and department goals.

PRINCIPLE DUTIES AND RESPONSIBILITIES: (Describe the specific roles and responsibilities of the position)

• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
• Support Automation and development for new automatic and robotic equipment qualification and sustaining.
• Support the Production Line. Report online machine status and issue to reporting manager
• Follow daily/shiftly line issue and production support for automation equipment.
• Continuous improvement on direct/indirect material cost down, UPH, MTBA, and MTBF enhancement program.
• Ensure automation equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Perform automation equipment conversion and set up. Observe 6S on daily job to ensure the continued and smooth production line.
• Able to conduct trainings to Operator/technicians on machine operation and skill improvement.
• Able to replace spare parts and machine buy off.
• Experience in automation equipment’s
• Manage engineer’s logistic needs.
• Any other duties assigned from time base on schedule and unscheduled activities
• Participate in productivity improvement, Lean, Kaizen and similar activities and provide manufacturing process optimization solution

Critical Manufacturing is dedicated to empowering high-performance operations to make Industry 4.0 a reality with the most innovative, comprehensive, and modular MES software. We have a global presence, but our headquarters, and the main technical center, are in Porto (Maia), Portugal, where we develop a state-of-the-art solution for Semiconductor, Electronics, Medical Devices, and other Discrete industries.

In 2023, Critical Manufacturing expanded its footprint to Penang, Malaysia.

Recognized for the third consecutive year as a Leader by Gartner, we are part of ASMPT, the world's largest supplier of best-in-class equipment, and technological process partner for the electronics and semiconductor industries.

The role:

Do you have interest in pre-sales and business process analysis? Would you like to develop your skills in advanced manufacturing production environments?

If you are a self-motivated individual who has a passion for Manufacturing Execution Systems and thrives in a fast paced environment, look no further! Team up and apply now as a MES Pre-Sales Engineer.

What you’ll do:

• Conduct business process analysis - elaborate strategies and plans for product implementation (after customer or potential customer visits)
• Create and deliver presentations and perform product demonstrations for potential customers
• Propose high-level technical solutions fulfilling customer requirements
• Perform project implementation estimations and propose high-level project plans
• Respond to customer technical questionnaires (RFQ, RFI)
• Statement of Work analysis and development
• Handover won projects to project implementation teams

What you must have:

• Industrial Management Engineering or similar degree
• Knowledge of advanced manufacturing production processes and requirements, particularly in electronics, semiconductors or medical devices industries
• Ability to work remotely with internationally distributed virtual teams
• Excellent written and verbal communication skills
• German proficiency - spoken and written
• Availability to travel
  

What we consider a plus (not mandatory):

• Previous experience with MES product implementation/deployment of at least 1 year
• Knowledge of agile methodologies

We are looking for people who take initiative and ownership in their work. As part of our team, you will be responsible for planning and implementing innovative test strategies and trimming procedures for MEMS-based sensors.

We seek individuals who can think outside the box and contribute creatively to our projects. You will have the opportunity to develop and optimize test concepts and programs for testing, characterization, and customer samples. Your understanding of system functionality, testability, and product quality will be invaluable as you collaborate within our development team.

Driving innovation is at the core of what we do. You will have the autonomy to independently create and design test strategies, working closely with MEMS Development. Additionally, you will take charge of the technical conception, development, and setup of laboratory facilities within the fab.

Reliability is key in our team members. You will coordinate module-specific measurement technology development in collaboration with advanced engineering, various development departments, and production. This includes meticulous tracking of time schedules and costs.

Lastly, we expect our team members to effectively delegate tasks. You will assign hardware and software development tasks to both external service providers and internal colleagues. Managing the workflow and ensuring accountability for results will be crucial in this role.

Responsibilities:

• Optimize or design new production processes in cooperation with product engineers, to enable product quality and yield.
• Debug and add new features to internally developped measurement software for the laboratory in C++ or C#.
• Enable testing new production methods and product variants in the laboratory.
• Create documentation of the production processes and support their implementation.
• Collaborate with colleagues in multiple locations and domains on a daily basis.