Total 2,202 job vacancies in Singapore

This role reports to the Operation Manager / Project Manager / Plant Manager

Job Scopes:

• To ensure all precast concrete products are manufactured in accordance with project specifications, approved drawings, statutory requirements, client requirements, and company quality standards. The QA/QC Engineer shall oversee quality control activities from incoming materials, production processes, product inspections, testing, documentation, and final product release.

Key Responsibilities

1. Quality Management System (QMS)

• Implement and maintain the Company's Quality Management System (ISO)
• Ensure compliance with approved quality procedures, work instructions, and inspection plans.
• Prepare, review, and update quality-related documents and records.
• Participate in internal and external quality audits.
• Support continuous quality improvement initiatives.

2. Incoming Material Testing & HDB Approved Material

• Inspect and verify incoming construction materials including:
  - Cement
  - Aggregates
  - Reinforcement bars and mesh
  - Embedded items
  - Lifting anchors and accessories

• Review suppliers' certificates and test reports.
• Maintain material traceability records.
• Coordinate material testing where required.

3. Non-Conformance and Corrective Actions

• Raise Non-Conformance Reports (NCRs) for quality deviations.
• Investigate root causes of defects and non-conformities.
• Propose corrective and preventive actions.
• Monitor implementation and effectiveness of corrective actions.
• Maintain NCR and defect tracking records.

4. Documentation and Reporting

• Maintain quality records including:
  - Inspection reports
  - Material records
  - Cube test reports
  - Calibration records
  - NCR records
  - Repair records

• Prepare weekly and monthly quality reports.
• Maintain product traceability and production records.

5. Client, Consultant and Authority Coordination

• Prepare Bi-Annual Report submission to HDB
• Prepare and submit monthly production volume to HDB
• Prepare MOS

6. Certification Audit & Renewal

• ISO 9001, ISO45001, ISO46001 & ISO 50001
• CES Plants SCI PAS & MAS
• CARES
• SGBP
• HDB Plant Listing
• BCA BLS & CRS

Requirements (Qualification & Experience):

• Diploma or Degree in Civil Engineering, Construction Management, Building Engineering, or related discipline.
• Minimum 2 years of relevant QA/QC experience in precast concrete manufacturing or construction industry.
• Experience in precast production and quality inspections is preferred.
• Knowledge of precast concrete production processes.
• Familiarity with HDB, BCA, and Singapore construction requirements.
• Understanding of ISO.
• Ability to interpret structural and shop drawings.
• Knowledge of concrete testing and inspection procedures.
• Strong analytical and problem-solving skills.
• Good communication and coordination abilities.
• Proficient in Microsoft Office applications.
• Ability to work independently and manage multiple tasks.

Working Location

• Tuas, Singapore
• Site visits may be required as and when necessary

• Well Established Company
• Basic $3800 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8am to 5.30pm

Job Responsibilities:

• To participate in procedures for Supplier Management process such as supplier on-boarding, selection and approval process by assessing and evaluating supplier profile; visiting and auditing of supplier facility and process, initiating supplier quality agreement review, and establishing good partnership with suppliers
• To evaluate and monitor supplier performance and collaboration with suppliers to identify opportunities for enhancements and improvements
• To support new supplier/material qualification by ensuring that all supplier on-boarding related documentations and action are complete, and that quality of purchased material meets the required standards and expectations
• To communicate and work closely with external supplier sand internal stakeholders (Procurement, Warehouse and Manufacturing) on supplier/material qualification related projects, material quality related issues. To address on purchased material failures/defects and derive proper preventive and corrective action plans through SCAR system
• Implement quality inspection standards on incoming and outgoing inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA) , non-conformance investigation reports and customer complaints and publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms etc) to ensure system compliance and ready for Management Review
• Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits
• Review audit findings and develop action plans to drive continuous improvements
• Perform any other duties as assigned

Job Requirements:

• Possess minimum Diploma in Quality Management / Engineering / Manufacturing or related field with minimum 2 years of relevant working experience in handling audits and ISO documentation in manufacturing industries
• Knowledge in Supplier Management
• Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301
• Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)
• Familiar with 8D and 5W problem solving methodology

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Background

We are a manufacturer of medical devices, located in Bukit Merah Central. Our QC Inspector role is suitable for an enthusiastic and energetic person! This is a part-time position: 4 hours/day, 5 days/week.

Experience using measuring equipment is preferred. However we will provide training if you are willing to learn new skills. Our components are small, so good eyesight is critical. Part of the work is performed in the Cleanroom (Cleanroom rules apply).

Please WhatsApp Polly on 84481935 if you would like to know more.

JobScope

• Inspect incoming components against specifications
• Inspect production batches against specifications (some tasks are performed in the Cleanroom)
• Assist in the preparation of batch documentation
• Monitor and update stock levels
• Assist in preparation of reports for management review
• Support Quality and Production Managers in admin tasks
• Assist with staff orientation and training

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

Responsibilities

• Lead a small team of junior QC.
• Inspect, test and sample materials or assembled parts or products for defects and deviations from specifications.
• Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
• Discuss inspection results with those responsible for products and recommend necessary corrective actions.
• Discard or reject products, materials and equipment not meeting specifications
• Maintain records of testing, information and various metrics such as number of defective products per day etc.
• Inspect procedures of the entire production cycle to ensure they are efficient and comply with safety standards.
• Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.
• NCR data collections and photos taking

Qualifications Summary

Experience:

This position requires minimum 1-year relevant experience in quality control.
We welcome candidates without leadership experience but is keen to take on leading a team role.

Education:

Minimum ITE grad

Skills:

• Proficient in MS Word, Excel, Outlook etc.
• Attentive to detail and consistency
• Basic literacy & numeracy
• Basic computer skills

Location based in West.
Company transportation provided.

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

Responsibilities

• Conduct daily incoming, in-process, and final inspections on manufactured spare parts to ensure compliance with quality standards and specifications.
• Operate and program CMM (Zeiss) equipment to conduct dimensional measurements and inspections analysis.
• Prepare and maintain QC inspection reports and related documentation.
• Perform measurements using micrometers, vernier calipers, height gauges, and profile projectors.
• Identify and report any non-conformances or quality issues to the QC Supervisor.
• Maintain inspection equipment, ensure calibration status, and assist in preventive maintenance.
• Follow and uphold ISO/AS9100/TS16949 or relevant quality standards and procedures.
• Keep inspection and work areas clean, safe, and organized.
• Support continuous improvement initiatives within the QC department.
• Perform any other duties as required by the QA Manager.

Job Requirements:

• Diploma/Certificate in Mechanical Engineering or related technical field.
• Minimum 2–3 years of QC inspection experience in a CNC machining or precision manufacturing environment.
• Proficient in CMM operation and basic programming.

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

QualityControl Technician

Our client isa MNC chemical manufacturer company. They are currently seeking for Quality Control Technician.

The role ofthe Quality ControlTechnician includes:

·      Performed analytical testing on raw materials,intermediates, and production samples using laboratory instruments andestablished testing procedures.

·      Prepared and standardized chemical solutions,reagents, and reference materials required for routine quality controlactivities.

·      Monitored test results and promptly communicatedany deviations or out-of-specification findings to production and qualitypersonnel to facilitate timely corrective actions.

·      Evaluated incoming raw materials throughinspection and testing to verify compliance with quality requirements andsupport material release decisions.

·      Executed routine verification, calibration, andperformance checks of laboratory equipment, including balances, pH meters,moisture analyzers, and other analytical instruments.

·      Operated, maintained, and troubleshot laboratoryequipment to ensure reliable performance and minimize operational downtime.

·      Coordinated equipment maintenance activities byreporting issues, tracking service requirements, and supporting repair workwhen necessary.

·      Assisted with the installation, qualification,relocation, and retirement of laboratory instruments and systems.

·      Prepared laboratory equipment for maintenance byimplementing lockout and isolation procedures to ensure safe workingconditions.

·      Participated in emergency preparedness exercisesand supported site safety initiatives.

·      Maintained laboratory housekeeping standards,ensuring work areas remained organized, compliant, and audit-ready.

·      Adhered to company policies related to safety,environmental protection, and quality management systems.

·      Supported continuous improvement efforts aimedat enhancing workplace safety, operational efficiency, product quality, andenvironmental performance.

·      Undertook additional laboratory andquality-related responsibilities as assigned by supervisory or qualitymanagement personnel.

Job Requirement:

·

NITEC or Diploma in Chemical Process Technology with 2 years’ working experience as Laboratory or Chemical Technician in a chemical industry.

Interested candidates, please sendyour detailed resume stating Past Employments, including Reasons of Leaving, LastDrawn Salary for the most recent 2 positions (breakdown of basic salary,allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TOINFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly sendin your latest job resume without your NRIC numbers and other ID numbers.
For job resume(s) that contain NRIC numbers and/ or ID details, it may not beprocessed and your job application may be rejected due to improper submissionof job application details. Please refer to the advisory guidelines on the PDPAfor NRIC numbers and other ID numbers.

By sendingyour job resume to us, it shall be deemed that you have agreed and hereby giveyour consent to MANFIELD in collecting, using and/ or disclosing your personaldata for the purpose of accessing and processing your job application and/ orfor future job opportunities within MANFIELD and/ or with the client(s) ofMANFIELD. If you wish to withdraw your consent, please notify us. Kindly visitour company website for more information on the Privacy Policy.

The Laboratory Technician conducts laboratory tests and analyses following established procedures and safety protocols. Supporting quality control and production, this role will be working 12 hours day and night shifts, involves in sample analysis, data collection, equipment maintenance, and ensuring reliable results at the EVAL Manufacturing site, starting in late 2026. The technician will be trained in future production roles to support safe, efficient operations. Reporting to the Shift Supervisor, the technician will receive training from Kuraray members and assist with laboratory equipment commissioning, ensuring a smooth launch of the new EVAL Quality Control Laboratory.

Responsibilities:

·      Conducting laboratory tests and analyzing in-process samples using specified instruments and equipment.

·      Preparation of chemical reagents.

·      Timely communication of analysis results to the Production Supervisor and Day QC team in the event of any abnormalities, ensuring swift remedial action if required

·      Conducting incoming inspection of chemicals (Methanol, NaOH, Azobis 2 4-dimehyl valeronitrile catalyst, VAM Acetic Acid) and advises Supervisor of material acceptance.

·      Conduct equipment daily validation (eg Analytical balance standard weight check, ph meter calibration and buffer check, KF standardization) and run with control sample for equipment performance check. Operate and calibrate laboratory instruments and equipment.

·      Carry out basic instrumentation and equipment functions and conduct maintenance, gas cylinder changeout and troubleshooting,where necessary.

·      Highlight Maintenance request notifications need to Supervision and QC members.

·      Assist in commissioning and de-commissioning of laboratory equipment.##_msocom_3

·      Assist in preparing lab equipment for maintenance and ensure equipment energy sources are isolated.

·      Participate in emergency response drills.

·      Maintain clean, organized, and safe laboratory conditions as per 5S standard.

·      Understand and comply with departmental Safety and Environmental guidelines, policies, and procedures.

·      Contribute to the improvement of the Safety, Health, Environment and Quality Programs.

·      Carry out any other tasks as assigned by Supervisor or QC personnel.

Qualifications:

• NITEC or Diploma in Chemical Process Technology.
• At least 5 years’ working experience as Laboratory or Chemical Technician in chemical industry.

Company Overview

The client is a Sheetmetal Fabrication House specializing in producing precision sheet metal components.

Job Summary

Support quality assurance and control processes by inspecting sheet metal parts, maintaining accurate records, and collaborating with operators and engineers to ensure product quality.

Responsibilities

• Assist QA/QC Technicians in executing quality assurance and control activities to maintain product standards
• Conduct in-process and final inspections of sheet metal parts to identify defects and ensure compliance with specifications
• Maintain and update inspection and quality records accurately to support traceability and reporting
• Record and update data in the system to reflect inspection results and quality status
• Communicate effectively with operators to address and resolve non-conformance issues promptly
• Assist QA/QC Engineers in verifying rejected parts to determine root causes and corrective actions
• Perform other assigned duties to support the quality assurance team and production processes

Preferred competencies and qualifications

• Minimum GCE 'O' Level or equivalent education
• 2-3 years of relevant experience in mechanical parts inspection or quality control
• Ability to interpret engineering drawings to assess product conformity
• Experience using QC measuring instruments and equipment for accurate inspections
• Proficient in Microsoft Excel and basic computer skills to manage data efficiently
• Strong attention to detail to ensure meticulous quality checks

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

Job Responsibilities

An Incoming Quality Control (IQC) Inspector verifies that raw materials, components, or chemicals from suppliers meet quality standards before they enter the production line, preventing defects. Key duties include sampling, conducting visual/dimensional inspections, testing materials, and documenting results.

• Inspection & Testing: Perform AQL (Acceptable Quality Level) inspections, visual checks, and dimensional checks on incoming raw materials. If required, may need to operate AOI equipment for 100% inspection on incoming core boards.
• Documentation: Record inspection results, maintain inspection logs, and generate reports, including non-conformance reports for failed materials.
• Non-Conforming Material Control: Identify, segregate, and place defective materials on hold to prevent use.
• Supplier Quality: Work with procurement and engineering teams to address quality issues with suppliers.
• Sampling: Perform aseptic sampling (if required) or standard sample testing based on inspection procedures if required.

Job Requirements

Customer support:

• In the event of receiving a complaint or returns due to a quality defect at a customer and contribute to an 8D reports to be submitted to the customer.
• Aggregate process control data according to a customer request and prepare its report.
• Additionally, support compiling a report on what is requested by a customer.

Process improvement:

• Monitor supplier’s critical parameters using SPC software by inputting critical values received from CoA and CoC.

Professional qualifications:

• Holding a ITE or equivalent in engineering, manufacturing technology or associated fields.
• It is favorable (promising) if having experiences of similar roles in incoming quality inspection environment at a semiconductor related manufacturer.
• Having experiences of working as a IQC inspector at a manufacturing plant is favorable.

Expertise and skills:

• Proficient in MS Office (Word, Excel, PowerPoint) for document creation.
• A basic knowledge of quality management systems (IATF, ISO, etc.).
• A basic knowledge of environmental, health and safety (EHS) management systems.
• A basic knowledge with chemical regulations (laws, SDS, GHS).

Competency:

• Able to listen effectively and to act appropriately in response to instructions given.
• Able to report necessary information, such as problems and production progress, to managers.
• Capable of making recommendations for improvement plan to reporting manager.

Attributes:

• Higher interpersonal ability and communication skills are essential for working with multiple departments and suppliers.
• A cooperative personality and good attitude are preferred.

Others:

• Normally, work the day shift on weekdays, but may be required to work on holidays as directed by your supervisor.
• May be required to work in a clean room environment.

Role and Responsibilities

1. Engineering & Design

· Understand customer requirements provided through project kick-off documents such as customer standards, project specifications, basis of designs, sequence of operations, equipment interfacing points lists, schematic drawings and layout plans.

· Work together with equipment suppliers and subcontractors to formulate ACMV control systems solution proposal to meet customer requirements.

· Identify key engineering design and further develop solution proposal into the necessary, material, schematics drawing, layout plans, typical details, control panel designs, system sequence of operation, points list and methods statement technical documents for submission and approval.

· Understand and define testing & commissioning strategies, work with other parties for troubleshooting and solution identification during site implementation.

2. Planning & Coordination

· Consider manpower and resource planning to develop timelines, detail work schedule and implementation plans for ACMV control scope of engineering construction projects.

· Effectively coordinate with cross-functional teams, equipment vendors and sub-contractors to meet project requirements.

· Maintain clear documentation throughout progressive project phases.

3. Compliance & Safety

· Understand, apply and comply to local standards or codes of practice as well as relevant industry standards.

· Understand, execute and ensure site compliance to company directed and project required safety management systems.

4. Stakeholder Communication

· Effectively liaise with and manage external stakeholders such as customers, consultants and main contractors to understand and meet project requirements and fulfil project deliverables.

· Provide project planning and progress updates through the update of project implemented trackers.

· Prepare training and handover materials, operation maintenance manuals.

5. Others

·  All other ad-hoc tasks as assigned by reporting manager.

Qualifications and Education Requirements

· Relevant Qualification in Mechanical/ Electrical/ Mechatronics Engineering or equivalent.

· For experience candidates, preferably to possess minimum 3 years relevant experience in the Industrial Engineering industry.

· Open to candidates with no previous working experience for junior position

·  Outgoing with strong interpersonal and effective communication skills.

·   Ability to work independently and target oriented in a fast-paced environment.

·   Ability to interact effectively with Clients, Consultants, project members and managers at all levels

Job Summary

The Quality Control Supervisor is responsible for overseeing all quality assurance and food safety activities in the food production facility. This role ensures that products meet company quality standards, customer specifications, regulatory requirements, and ISO 22000 Food Safety Management System (FSMS) standards. The supervisor monitors production processes, hygiene practices, documentation, corrective actions, and continuous improvement initiatives to ensure safe and high-quality food products are consistently produced.

Responsibilities:

• Supervise daily quality inspections for raw materials, processing, packaging, and finished products.
• Ensure compliance with product specifications, sensory standards, and food safety requirements.
• Conduct routine checks on product appearance, texture, moisture content, weight, labeling, and packaging integrity.
• Monitor Critical Control Points (CCPs) and Operational Prerequisite Programs (OPRPs) during production.
• Review and verify production records, batch records, and quality reports.
• Investigate product non-conformities, customer complaints, and quality incidents.
• Implement corrective and preventive actions (CAPA) to prevent recurrence of quality issues.
• Coordinate product sampling and laboratory testing when required.
• Ensure full compliance with ISO 22000 Food Safety Management System requirements.
• Maintain and monitor HACCP plans, hazard analysis, and risk assessments for food production processes.
• Ensure food safety documentation, SOPs, work instructions, and records are properly maintained and updated.
• Conduct internal audits and assist during external audits, certification audits, and regulatory inspections.
• Monitor traceability and product recall procedures to ensure readiness and compliance.
• Verify sanitation, cleaning, and pest control programs are effectively implemented.
• Ensure staff adherence to GMP (Good Manufacturing Practices), SSOP (Sanitation Standard Operating Procedures), and food safety protocols.
• Support continuous improvement initiatives related to food safety, hygiene, and operational efficiency.
• Work closely with Production Manager to ensure production processes meet quality and food safety standards.
• Monitor processing parameters such as packaging conditions.
• Ensure proper calibration and maintenance of measuring and inspection equipment.
• Assist in optimizing production efficiency while maintaining product quality standards.
• Ensure proper handling and storage of raw materials and finished products.

Requirements:

• Diploma or Degree in Food Science, Food Technology, Microbiology, Quality Assurance, or related field.
• Minimum 3–5 years of experience in food manufacturing quality control or food safety management.
• Experience in food production is preferred.
• Hands-on experience with ISO 22000, HACCP, GMP, and food safety audits.
• Strong knowledge of food safety regulations and ISO 22000 standards.
• Familiarity with HACCP principles and CCP monitoring.
• Good leadership, communication, and problem-solving skills.
• Strong attention to detail and documentation accuracy.
• Ability to work in a fast-paced food production environment.
• Proficiency in Microsoft Office and quality reporting systems.

*Must have handled a drone recently and have a Singapore Citizenship*

Description

We're looking for someone with exceptional manual dexterity, superior eye-hand coordination, a calm demeanour when facing challenges, with a proven ability to communicate & work well with others in the Industrial and Defence Industries.

Responsibilities

• Applying & securing all permits and authorizations necessary for UAV operations.
•  Processing QC data for failure analysis and work with stakeholders to improve success rate
• Responding to emergencies and malfunctions in a safe and effective manner.
• Maintain and update quality control flight test records, compile and submit as weekly report.
• Plan and scheduling of indoor and outdoor QC flight tests to meet delivery schedule
• Gather feedback from UAV end-users for quality control enhancement
• Provide feedback to production team on assembly quality matters
• Buy off drone units to be fit for delivery, close collaboration with assembly quality team
• Working with engineering team to address end-user feedbacks and requests
• Communicating with stake holders to understand UAV flight mission objectives,
• Planning flight paths and missions including conducting risk assessments, to achieve mission objectives, with considerations of Aviation Regulations and Fly-it-Safe practices.

Skills

Holds a valid CAAS UAPL (up to 25kg would be advantageous)

Education

Diploma, A-levels, or with relevant experience in similar capacity.

Additional Requirement
Must be a Singaporean. Applicants are required to undergo security clearances. 

Quality Engineer

Join Velocity Electronics as our next Quality Engineer in Singapore.

If you are driven to elevate quality standards and strengthen operational performance that support business success — we want to meet you.

What can you expect to do?

The Quality Engineer ensures product conforms to our customers’ requirements and assists with responding to customer concerns related to product quality in order to deliver exceptional experiences and outcomes.

You will be responsible for:

• Perform final quality control (QC) checks on inspected product to ensure it conforms to our customers’ requirements
• Provide training and technical support and assist with responding to customer concerns related to product quality
• Conduct internal QMS and ESD audit

In addition, you will:

• Review inspection results and, as needed, perform supplemental inspections on product to determine acceptability of product
• Document results of final QC checks in Velocity’s ERP system
• Communicate inspection findings to the Purchasing and Sales teams and advise on the actions necessary to resolve issues (if applicable)
• Coordinate with the Operations Manager to ensure Inspectors are performing inspections to standard
• Conduct inspection skills and technical trainings for quality inspectors
• Provide technical support to Sales and Purchasing Departments
• Assist the Quality Manager in Customer Corrective Action Request
• Perform other duties as requested by management

What is the experience and knowledge needed to be successful in this role?

Our ideal candidate is:

• Exceptional judgment
• Detail-oriented and thorough
• Strong written and verbal communication skills
• Problem solver
• Able to effectively coordinate and communicate with others
• Adaptable and flexible
• Able to work on several projects simultaneously
• Independent

Skills and Experience:

• Bachelor’s degree preferred; Diploma holders with relevant experience will also be considered
• Minimum 5 years of experience performing quality inspection on electronic components with demonstrated ability to make valid conformance decisions
• Expert product knowledge, experience working with complex ERP systems
• Understanding of basic math, including percentages and tolerances

This position will be located in our Singapore Office, APAC Regional Headquarters.

Please note that applicants must have the legal right to work in Singapore, as visa sponsorship is not available for this role.

Why Join Us

At Velocity Electronics, our core values—Be Amazing Today, Demonstrate Mutual Respect and Trust, Act Courageously, and Own Your Outcomes—drive our success.

If you thrive in a fast-paced, results-oriented environment and are motivated to exceed targets, you will be empowered to take ownership of your success, build meaningful relationships, and drive growth through innovative solutions.

Join a top independent electronic components distributor serving the world’s leading contract manufacturers and OEMs.

The Quality Control (QC) Technician's primary duty is to ensure that a quality product is produced within a controlled environment. This role is engaged in different testing methodologies, ranging from molecular biology to the latest analytical chemistry techniques. He/She performs annual and quarterly physical inspection and the staging of QC materials and/or production raw materials. He/She will also oversee the necessary documentation, including logbooks, test requests preparation and sample distribution. In addition, he/she will be responsible for managing the inventory levels of the assigned area as well as discarding old samples and hazardous waste from the laboratory and perform housekeeping tasks.

• Responsible for sampling and inspection of raw materials, packing materials, intermediates and finished products
• Product R&D
• Responsible for quality control in the whole process of production
• In charge of regular calibration of equipment
• In charge of product inspection
• Handle return and rejected items

The Attach and Train training period lasts for 15 months. Structured on-the-job training (OJT) will be provided and conducted at the participating companies to facilitate the application of learning and to ensure that individuals acquire necessary competencies to perform at their job.

This position will be based at Singapore Tuas site, under Quality Control team. The role follows a rotating shift schedule (day and night), 12 hours working shift.

What you’ll get:

• An agile career and dynamic working culture.

• An inclusive and ethical workplace.

• Daily company bus from the MRT location near your home to and from the Tuas site.

What you’ll do:

• To prioritize and perform the various testing/analysis in timely manner, in order to support the business requirements.

• Analysis of final product, in-process, raw material or environmental samples according to Standard Operating Procedures and Test Methods.

• Documentation and review of results in accordance with current Good Manufacturing Practices (cGMP).

• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.

• Support sample logistics area including retention sample storage, external lab test, QC documents control, shipment of QC samples.

• Prepare, maintain standards and reagents as required by GMP documents..

• Responsible to follow data integrity requirements.

• Actively contributes to operational efficiency/continuous improvement initiatives.

• Any other duties as assigned by your Manager.

• Uphold data integrity principle in accordance to Lonza policies.

• Proactively evaluate, identify and improve data integrity process

• Understanding and execution of spectroscopy, and other assigned methods which may include chromatography methods (HPLC), TOC, Protein concentration (A280 or SoloVPE), osmolality, appearance and other

What we’re looking for:

• Degree in a relevant Science field or equivalent

• Individual without prior working experience in the biopharmaceutical manufacturing industry may also apply

• Understanding of the application of mammalian cell culture for the production of biopharmaceuticals

• Understanding of cGMP regulations

• Good problem solving and analytical skills

• Good communication and teamwork skills

• Willing to perform rotating 12-hour shift pattern

About Lonza

At Lonza, our people are our greatest strength. With 30+ sites across five continents, our globally connected teams work together every day to manufacture the medicines of tomorrow. Our core values of Collaboration, Accountability, Excellence, Passion and Integrity reflect who we are and how we work together. Everyone’s ideas, big or small, have the potential to improve millions of lives, and that’s the kind of work we want you to be part of.

Innovation thrives when people from all backgrounds bring their unique perspectives to the table. At Lonza, we value diversity and are committed to creating an inclusive environment for all employees. If you’re ready to help turn our customers’ breakthrough ideas into viable therapies, we look forward to welcoming you on board.

Ready to shape the future of life sciences? Apply now.

R74849

Part A - Key Accountabilities and Responsibilities

• Perform internal audits and to ensure organization is in compliance to internal processes and airworthiness regulatory requirements.
• Improve / enhance internal processes through scheduled / unscheduled /surveillance audits.
• Maintain and keep up-to-date Quality manuals and training records.
• Assist and perform external supplier audits.
• Assist in external airworthiness authority and customer audits.
• Follow-up with process owners to ensure prompt and appropriate corrective actions are duly completed.
• Monitoring open audit findings, including monitoring the execution and the intended effectiveness of the actions and the monitoring of corrective action plans.
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality.
• Conduct internal briefing / training for certifying staff and technicians as necessary.
• Assist in maintaining the approved suppliers list.
• Processing and monitoring of company authorization renewal and applications.
• The maintenance of quality documents and systems such as QA Manuals and database management of the quality management system.
• Drive and promote Quality and Safety Culture and participate in QEHS and other shop initiatives as necessary.
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality.
• To carry-out other QA functions as required.

Part B. Required Experience, Competencies & Qualifications

• Minimum Diploma in Engineering from an accredited polytechnic (or equivalent).
• Minimum 2-3years’ experience in aerospace quality (management) systems or a quality assurance role.
• Knowledge of aviation regulation such as Part 145 EASA, FAA, CASA, SMS and AS9100.
• Knowledge of and experience with aircraft / component (parts) maintenance.
• Internal auditor trained with auditing experience is preferred. 
• Proficiency with PC tools and software.
• Good command of written and spoken English.
• Being able to work independently and good analytical skills.
• Able to communicate at all levels of the organization.

Job Description:

• Perform routine production line inspections, including in-process quality checks, finished product sampling, and packaging evaluations.
• Maintain accurate and updated QC records, reports, and documentation at all times.
• Provide support during internal and external audits by preparing and organizing the required documents and records.
• Ensure compliance with all established SOPs while contributing to the development of new procedures to improve safety, hygiene, and operational efficiency.
• Assist in carrying out regular inspections and monitoring of raw materials, work-in-progress items, and finished products.
• You are required to maintain proper documentation and records related to your responsibilities in accordance with generally accepted practices.
• In carrying out your duties and responsibilities, you are expected to collaborate effectively with other team members within the Company to ensure tasks are completed promptly and meet the standards set by the Company’s management.

Requirements:

• Diploma in Food Science & Technology or any related fields.
• Minimum 2 years of experience as Quality Control role.
• 5.5 days work week

Interested applicants for the above advertised position(s), please kindly email an updated copy of your resume to: gs1@talenttradersg.com;

EA License No.: 13C6305

Registration No.: R23117856 CHOE KIN MUN

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Are you passionate about quality and attention to detail? Join a dynamic manufacturing environment where your expertise will play a vital role in ensuring products meet the highest standards before reaching production.

Key Responsibilities

• Conduct inspections and testing on incoming materials, components, and finished products to verify compliance with specifications, drawings, and quality requirements.
• Record inspection findings accurately and perform system updates and transactions following inspection approvals.
• Evaluate and document First Article Inspection (FAI) samples submitted by suppliers.
• Identify and escalate non-conforming materials through the appropriate quality reporting processes.
• Support quality documentation activities and maintain inspection records.
• Assist with administrative and documentation tasks related to quality operations.

What We're Looking For

• Qualification in Engineering or a related technical discipline.
• Experience in a manufacturing, production, quality assurance, or quality control environment.
• Familiarity with inspecting electronic, electrical, or mechanical components based on technical drawings and specifications.
• Proficiency in using inspection and measurement tools such as vernier calipers, micrometers, microscopes, measuring scopes, or similar equipment.
• Knowledge of regulated manufacturing processes and laboratory practices will be advantageous.
• Meticulous, analytical, and committed to maintaining high quality standards.

Interested applicants, please send your updated resume to leonleong@recruitexpress.com.sg

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd
EA License No. 99C4599

Electrical Engineer (Quality Control)

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Job scopes

1) Implement and manage quality control procedures for electrical works on site.

2) Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

3) Review and verify electrical shop drawings, material submissions, and method statements for compliance.

4) Monitor workmanship to ensure alignment with project specifications and quality standards.

5) Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

6) Liaise with consultants, clients, and subcontractors to resolve quality related issues.

7) Maintain quality documentation, inspection records, and test reports.

8) Support handover and commissioning by ensuring all electrical quality requirements are met.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279