Total 12,781 Full-time job vacancies

US Biotech MNC hiring in Singapore for an experienced Embedded Firmware Engineer to design, develop, and integrate firmware.

Key Responsibilities

• Develop embedded firmware in C/C++ for complex hardware systems.

• Design, integrate, test, and release firmware from concept to manufacturing.

• Collaborate with Electrical, Mechanical, and Software teams to troubleshoot and optimize embedded systems.

• Follow firmware development best practices, coding standards, and documentation processes.

Requirements

• Bachelor's or Master's degree in Electrical/Electronics, Computer Engineering, or related field.

• 5+ years of embedded firmware development experience with hardware integration.

• Strong proficiency in C programming and embedded systems design.

• Experience with RTOS concepts, scheduling, and synchronization.

• Ability to interpret schematics and hardware datasheets.

• Knowledge of cybersecurity implementation in embedded systems.

• Strong communication skills and willingness to travel to the US.

Preferred Skills

• Experience with ARM processors, RTOS (FreeRTOS, ThreadX, VxWorks, QNX), and product lifecycle development.

• Hands-on experience with interfaces/protocols such as I2C, SPI, USB, CAN, Ethernet, and TCP/IP.

• Familiarity with Git, Linux, debugging tools, GNU toolchain, and AI coding tools (e.g., GitHub Copilot).

• Exposure to FPGA/RTL development, MATLAB, Python, Verilog/VHDL, or Xilinx tools is an advantage.
  

  If this opportunity aligns with your skills and career goals, we encourage you to apply.

  EA License: 21C0783

  EAP Registration No: R24123529

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

About the Role

We are seeking a Firmware Engineer / Senior Firmware Engineer to join a dynamic engineering team responsible for designing, developing, and maintaining embedded firmware solutions for industrial automation products. The successful candidate will be involved in firmware architecture, embedded software development, debugging, testing, and collaboration with cross-functional global teams to deliver high-quality and reliable products.

Key Responsibilities

• Design, develop, enhance, and maintain firmware for industrial automation products, including Micro800 PLC family solutions.
• Implement embedded firmware using industry-standard development tools and environments.
• Perform firmware debugging, troubleshooting, root cause analysis, and corrective actions for complex technical issues.
• Develop and maintain low-level device drivers and hardware abstraction layers for embedded systems.
• Work closely with Firmware, Hardware, System Test, and Product Management teams across global locations.
• Participate actively in Agile development activities including sprint planning, backlog refinement, stand-ups, and retrospectives.
• Conduct firmware verification, validation, and systematic testing to ensure product quality and reliability.
• Support integration of communication protocols and embedded operating systems.
• Prepare and maintain technical documentation including design specifications, interface definitions, test plans, and implementation guides.
• Participate in design reviews, code reviews, and technical discussions to ensure maintainable and scalable firmware solutions.
• Contribute to continuous improvement initiatives, engineering best practices, and software development processes.

Requirements

Education

• Bachelor's Degree in Electrical Engineering, Computer Engineering, Computer Science, Embedded Systems, or a related discipline.

Experience

• Minimum 5 years of experience in embedded firmware or embedded software product development.
• Experience in industrial automation, PLCs, or control systems is advantageous.

Technical Skills

• Strong programming experience in C and C++ for embedded systems.
• Hands-on experience with STM32 or similar 32-bit microcontroller architectures.
• Experience in low-level driver development and hardware interfacing.
• Experience with Real-Time Operating Systems (RTOS) such as:VxWorksThreadXQuadrosFreeRTOSOther RTOS platforms
• Knowledge of communication protocols including:TCP/IPEthernetUSBWi-FiCAN BusProfibus
• Familiarity with embedded development and debugging tools including:JTAG debuggersOscilloscopesLogic analyzersHardware diagnostic tools
• Understanding of firmware architecture, embedded design patterns, and hardware-software integration.

Soft Skills

• Strong analytical and problem-solving skills.
• Ability to investigate and resolve complex technical issues independently.
• Excellent communication and interpersonal skills.
• Ability to collaborate effectively in multicultural and cross-functional teams.
• Innovative mindset with a willingness to explore new ideas and solutions.

Preferred Qualifications

• Experience developing firmware for digital and analogue hardware platforms.
• Ability to interpret hardware schematics and component specifications.
• Experience documenting firmware architecture and hardware-software interfaces.
• Knowledge of embedded software development methodologies, coding standards, and modern engineering practices.
• Experience driving process improvements and engineering excellence initiatives.
• Knowledge of industrial automation systems, PLCs, and control technologies.

Description:

We are looking for a Senior Engineer/Engineer -Firmware . You will design, program, debug and modify software. You will troubleshoot code for firmware (IC embedded code) applications. Involves analogue and digital hardware and software operating systems.

What you will be working on:
• Design firmware for the Micro800 PLC family.
• Implement embedded firmware using IAR Embedded Workbench, and perform debugging through JTAG and other hardware debug tools.
• Work with cross-functional teams in both Bangalore and Singapore (Firmware, Hardware, System Test, Product Management).
• Participate in Agile processes, including sprint planning, backlog refinement, and daily stand-ups.
• Perform technical investigation, root cause analysis, debugging, and systematic verification of firmware issues.
• Maintain clear, high-quality engineering documentation including design specifications, interface definitions, and plans.
• Participate in design reviews and code reviews to ensure robustness, security, and maintainability of firmware.
• Contribute to continuous improvement of development processes, and quality practices.

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

Role: Firmware Engineer

JD:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

Embedded Software/ Firmware Engineer

What a Software Firmware Engineer does at HP:

• Design enhancement, update, and programming changes for portions and subsystems of firmware.
• Analyze design and determine coding, programming, and integration activities required based on general objectives and knowledge of overall architecture of product or solution.
• Write and execute complete testing plans, protocols, and documentation for assigned portion of application; identifies, debugs and creates solutions for issues with code and integration into application architecture.
• Lead a project team of other firmware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for assigned systems portion or subsystem.
• Collaborate and communicate with management, internal, and outsourced development partners regarding firmware design status, project progress, and issue resolution.
• Represent the firmware engineering team for all phases of larger and more- complex development projects.
• Provide guidance and mentoring to less- experienced staff members.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or Master's degree in Computer Science, Information Systems, Electrical Engineering, or equivalent.
• Typically 6-9 years experience.
• Expertise in multiple firmware design tools and languages.
• Designing firmware, including interaction and integration with hardware design.
• Firmware testing methodology, including writing and execution of test plans, debugging, and testing scripts and tools.
• Ability to effectively communicate product architectures, design proposals and negotiate options at management levels.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Disclaimer

This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Job Description

You will Designs, troubleshoots software programmer for software enhancements and new products. Develop software tools including operating systems, compilers, routers, networks, utilities, databases and Internet-related tools. Determine hardware compatibility or influence hardware design.

You will report to Engineering manager and follow a Hybrid working schedule in Singapore.

Your Responsibilities:

• You will require a good background in communication protocol firmware development and real-time control systems.

• You will help design embedded software subsystems. These subsystems will increase and balance a variety of goals. The goals include run-time performance, memory requirements, simplicity, correctness, development time, effort, reusability, extendibility, reliability, and safety.

• You will need to maximise the reuse of existing internal or external software components to shorten the product development cycle.

• You will Have knowledge in Industrial Automation, PLC Programming

• You will Have Experience programming 32 bits Microcontroller (ARM) and developing low-level device driver.

• Industrial Communication Protocol: CIP, or EtherNet/IP

The Essentials - You Will Have:

• Degree / master's in computer science/ Embedded Systems / Computer Engineering / Electrical Electronic Engineering with concentration in Embedded Software engineering

• Minimum 4+ years of experience developing Real-time Embedded Systems.

• Knowledge in programming language: C, C++

• You have certification in CERT Secure Coding in C and C++

The Preferred - You Might Also Have:

• You have Experience using different hardware-assisted debugging tools

• You have Experience of Agile process, static analysis tool and version control tools (e.g. ClearCase, Rational Team Concert) will be an advantage

• Open-minded, a willingness to experiment within acceptable boundaries.

Our benefits package includes …

• Comprehensive mindfulness programmes with a premium membership to Calm

• Volunteer Paid Time off available after 6 months of employment for eligible employees

• Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation.

• Employee Assistance Program

• Personalised wellbeing programmes through our OnTrack programme

• On-demand digital course library for professional development

• ... and other local benefits!

At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles.

#LI-NB1

#LI-Hybrid

Embedded Software/ Firmware Engineer

What a Software Firmware Engineer does at HP:

• Design enhancement, update, and programming changes for portions and subsystems of firmware.
• Analyze design and determine coding, programming, and integration activities required based on general objectives and knowledge of overall architecture of product or solution.
• Write and execute complete testing plans, protocols, and documentation for assigned portion of application; identifies, debugs and creates solutions for issues with code and integration into application architecture.
• Lead a project team of other firmware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for assigned systems portion or subsystem.
• Collaborate and communicate with management, internal, and outsourced development partners regarding firmware design status, project progress, and issue resolution.
• Represent the firmware engineering team for all phases of larger and more- complex development projects.
• Provide guidance and mentoring to less- experienced staff members.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or Master's degree in Computer Science, Information Systems, Electrical Engineering, or equivalent.
• Typically 6-9 years experience.
• Expertise in multiple firmware design tools and languages.
• Designing firmware, including interaction and integration with hardware design.
• Firmware testing methodology, including writing and execution of test plans, debugging, and testing scripts and tools.
• Ability to effectively communicate product architectures, design proposals and negotiate options at management levels.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Disclaimer

This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Job Summary

Develop and debug firmware for hardware products, execute test plans, perform failure analysis, and support engineering documentation and project progress within a collaborative team environment.

Job Description:

• Analyze product specifications and hardware requirements to guide firmware/BIOS development
• Design, develop, code, and debug firmware to ensure product functionality and performance
• Develop and execute software/firmware test plans and document test outcomes accurately
• Perform failure analysis and troubleshoot firmware and hardware issues to identify root causes and implement corrective actions
• Support hardware debugging during development, testing, and production phases
• Manage source code, maintain technical documentation, and control versioning effectively
• Prepare engineering documentation including test reports, specifications, Engineering Change Requests (ECR), and product release materials such as Master ROM
• Monitor and report project progress to stakeholders and support ad-hoc engineering tasks as needed
• Participate actively in ad-hoc projects and assignments to support team objectives

Job Requirements:

• Bachelor’s Degree in Electronic/Computer Engineering, Computer Science, Software Engineering, or equivalent is preferred
• Experience in embedded system development using C/C++ programming languages
• Knowledge of programming, debugging, and firmware development lifecycle
• Experience in software/firmware testing, failure analysis, and troubleshooting
• Ability to work independently and collaboratively within cross-functional engineering teams
• Self-motivated with strong time management skills to meet deadlines and support ad-hoc tasks
• candidates without experience are welcome to apply

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Reporting to the Firmware Team Lead/Project Manager, the successful applicant will be involved in switching mode power supply development activities such as firmware development, firmware verification, auto test program, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

• Participate in product definition, specification, and requirements analysis working with cross-functional stakeholders.
• Collaboration on firmware architecture and development strategy with a particular focus on wired and wireless networks.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost.
• Participate in product definition, specification and requirements analysis working with cross functional stakeholders.
• Design, code, integrate, test, support and enhance software solutions for power conversion systems.
• Perform system integration and validation testing activities, including verification of interoperability within overall solution.
• Assist with evaluating existing and emerging technologies to identify solutions that will reliably operate in a wide range of installed environments.
• Architecting, developing, integrating, and delivering embedded and PC software in a regulated product development.
• Participating in all project lifecycle phases – from design and code development through unit testing, documentation, and release.
• Coaching and guidance to Jr Firmware engineers in evaluation and design.
• Provides technical direction to the team.
• Provide technical support to factory on design related issue.
• Provide support for power supply prototypes and production products.
• Collaborate with remote teams and local teams to support integration work with hardware team.
• Participate in software qualification activities such as SFMEA and code reviews.
• Participate in system integration and validation testing activities, including production/factory support.

Requirements:
Bachelor’s or master’s degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field.

5-7 years of related work experience.

Experience or good understanding of power supply topologies and analog/digital circuitry is a plus.

Familiarity with software development (Microsoft C#, GUI).

Experience with Microchip, TI, ST microcontrollers and DSPs.

Experience interacting with software debugging in an embedded environment.

Familiarity with digital control or firmware for power electronics a plus (PWMs, ADC, digital filter).

Experience in embedded system or signal processing algorithms (DSP) control.

Experience implementing & developing communication stack driver and networking physical protocols (I2C, SPI, RS-485, PMBus, Modbus, Ethernet, etc.).

Some knowledge/experience in IoT, TCP/IP, Websocket, LWIP stack or freeRTOS will be an added advantage.

Comfortable using oscilloscopes, multi-meters, power supplies, etc.

Comfortable reading hardware schematics and data sheets.

Familiarity with version control systems (SVN), and release methodologies.

Familiarity with MISRA, IEC62304 or other coding standards will be an added advantage.

Disciplined and detail-oriented; experience delivering robust, readable code.

Experience in recreating sporadic types of issues/failures using various debugging techniques.

Excellent analytical and problem-solving skills.

Job Scope:

• Develop project plans, timelines, and budgets
• Determine and assess resource requirements for construction projects
• Oversee feasibility studies, technical designs, and project specifications
• Lead and manage the construction team, including Engineer, Site supervisor and workers
• Ensure compliance with construction safety standards and local regulations
• Coordinate with architects, engineers, and other stakeholders to ensure seamless execution
• Monitor project budget and expenditures
• Prepare and submit cost estimates, progress reports, and budgetary updates
• Negotiate contracts and manage procurement of materials and equipment
• Ensure that all construction work meets the required standards of quality
• Perform site inspections and resolve any on-site issues
• Ensure timely delivery of the project while maintaining quality benchmarks
• Maintain clear communication with the client, providing regular updates on project progress
• Manage conflicts and issues that arise between the construction team and stakeholders
• Ensure all project documentation is up-to-date and properly filed
• Ensure all construction work complies with safety regulations and legal requirements
• Respond to emergencies and implement contingency plans.
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Degree in Civil, Construction, or a related field
• Minimum 2 years and above experiences in construction project management or a related role
• Proven experience managing large-scale construction projects
• Strong knowledge of construction methods, materials, and regulations
• Excellent leadership, organizational, and communication skills
• Proficiency in project management software (e.g., MS Project, AutoCAD, or similar)
• Ability to manage budgets, contracts, and timelines effectively
• Problem-solving skills with the ability to handle high-pressure situations
• Ability to visit construction sites and manage on-site tasks as needed
• Willingness to work long hours, including weekends, to meet project deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

Position Overview

We’re looking for a Junior Software Developer to work on areal-world Access Control System that manages building security, door access, and hardware communication.

This role is ideal for fresh graduates who want hands-on experience with enterprise software, IoT devices, and applied AI, beyond pure application development.

What You’ll Do

• Enhance and maintain a C# .NET codebase
• Debug communication between controllers and card readers
• Develop access control features and workflows
• Work with databases and hardware integration
• Use and support AI-assisted tools or features for analysis, automation, or intelligent logic
• Write clean code and documentation

Technologies

• C# .NET, SQL Server, Entity Framework
• TCP/IP, serial communication
• JSON, REST APIs
• AI tools and services (exposure and learning)
• Visual Studio, Git
• Door access hardware and sensors

What We’re Looking For

• Degree in Computer Science or related field
• Strong C# fundamentals and problem-solving mindset
• Interest in AI and emerging technologies
• Bonus: exposure to databases, networking, or AI tools

Job Description:

• Responsible for New Product Introduction (NPI) reviewing of drawings and specifications provided by Customer
• Raise Supplier Problem Sheet (SPS) for any issue observe at the review for customer clarification and disposition for NPI parts
• Generate internal drawing for those part with incomplete details
• Generate 3D drawing for drawings with not clear and hidden dimensional information
• Create drawing for those parts need fixture for production
• Create Bill of Materials (BOM) and Routing for job travelers
• Responsible in decision making on which site location the part will be manufactured.
•  In-charge on which Vendor the part will be sub-out for some special processes as call out on drawing
• Provide Part Technical Information Sheet (PTIS) for Vendor on those parts for sub out process.
• Analyze and discuss with Finance on the part costing for new products
• Responsible for giving go signal to Planning for releasing the job order
• Update NPI parts tracking and  Process Development Sheet
• Review Engineering Change Order(ECO) and Engineering Specs Waiver (ESW) for any change on current / existing part and for implementation of changes
• Submit Supplier Problem Sheet(SPS) for issues encounter at production for existing parts related to drawing and specifications.
• Constant monitoring of SPS issue to close it with customer
• Download DMM BOM from Agile and compare with SAP material master before uploading to SAP
• Assist in all DMM BOM related issue
• Assist Technical advice related to IMT welding and fixture generation
• Provide assistance to Purchasing for any material or OEM buying parts related
• Provide technical knowledge to UMS Penang Engineering and Production related issues
• Assist Quality team on the analysis on quality issue related to First Article Inspection (FAI) submission, generation of Failure Mode Effects and Analysis (FMEA), customer 8D, Failure Analysis of Discrepant Material Report (DMR), Part Qualification Process (PQP).
• Prepare ISO 9001 and SSQA documentation for Engineering
• Closely working with Customer Service (CS) for Request for Quote (RFQ) for new project and secondary process and customer rework parts.
• Work with Customer for any design improvements

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ISO norms and standards and with conventional drafting stations.
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Familiar with material types and purpose. 
• Familiar with welding AWS (clean room and non-clean room).
• Familiar with tubing, fittings and other OEM parts.
• Knowledge of semiconductor and equipment assembly process.
• Familiar with technical issues solving on the assemble parts.
• Familiar the semiconductors components process.
• Familiar the process improvement.
• Familiar the helium leak, hydrostatic leak test and load test.
• Familiar the OEM components specs.
• Writing skills for preparing manuals, parts lists, proposals and design documentation
• Time-management skills for meeting deadlines

JOB SCOPE:
1. supervision of construction on-site

2. ensure works are carried out according to approved drawings, specifications, and contract requirements.

3. monitor contractors' workmanship and construction methods.

4. quality control, safety & compliance, coordination.

REQUIREMENTS:

1.Diploma or Degree in Civil engineering , structural engineering or related field.
2. More than 5 years relevant experience

Company Overview

1st Solution is a leading CCTV service provider in Singapore specializing in IT equipment and supplies including CCTV, digital locks, time attendance, and door access systems. We deliver excellent customer service at competitive costs to our valued clients.

Job Summary

You will lead and coordinate solar energy system installations, ensuring quality and performance while troubleshooting technical issues to support renewable energy adoption and sustainability goals.

Responsibilities

• Install solar PV modules, panels, and support structures precisely according to design specifications to ensure system integrity
• Monitor and verify the quality of solar installation work to maintain high engineering standards
• Conduct site surveys for solar projects to assess feasibility and plan installations effectively
• Manage and coordinate the installation of solar energy systems to optimize operational performance and efficiency
• Troubleshoot technical issues during installation and operation, providing innovative solutions to improve renewable energy adoption
• Oversee electrical tasks related to solar installations to ensure compliance with safety and technical standards
• Participate actively in site meetings to communicate progress, challenges, and coordinate with stakeholders
• Prepare and provide accurate material lists to support procurement and installation planning

Job Responsibilities:

• Report and assist the Project Manager on overall project functions including project management, site management, and risk control management to achieve project objectives.
• Assist in project planning, implementation, and coordination of all construction activities according to the master work program and detailed schedule.
• Prepare and submit project-related documentation such as work schedules, method statements, design plans, risk assessments, monthly progress reports, and technical submissions.
• Supervise and monitor construction works to ensure compliance with contract specifications, Bills of Quantities (BOQ), approved drawings, quality standards, Environmental, Safety & Health (ESH) requirements, and contract documents.
• Coordinate and liaise with Clients, Consultants, Authorities, Subcontractors, and Suppliers on project matters and technical issues.
• Provide technical support and solutions to resolve design and site-related issues efficiently.
• Ensure proper documentation and record keeping for all project correspondences, reports, and submissions.
• Monitor project progress, quality, and safety standards to ensure timely completion of works.
• Attend project meetings, site inspections, and coordination meetings when required.
• Support the Project Manager in ensuring smooth project execution and compliance with statutory requirements.

Requirements:

• Degree in Civil Engineering or related Engineering discipline.
• Minimum 3 years of relevant experience in construction or infrastructure projects.
• Experience in LTA, civil, building, or infrastructure projects will be an advantage.
• Familiar with construction drawings, technical specifications, and project documentation.
• Good knowledge of construction methods, safety regulations, and quality standards.
• Proficient in Microsoft Office, AutoCAD, and other engineering software.
• Strong coordination, communication, and problem-solving skills.
• Able to work independently and in a fast-paced environment.
• Good teamwork and interpersonal skills.

Maintain the existing PLC and SCADA system, and build the new system, and trouble shooting for the control system and control panel, and prepare the electrical single line drawing using AutoCAD, and coordinate with customer to understand customer's requirement. We will provide on site training, and hope the candidate willing to learn.

Job Scope:

• Develop project plans, timelines, and budgets
• Determine and assess resource requirements for construction projects
• Oversee feasibility studies, technical designs, and project specifications
• Lead and manage the construction team, including Engineer, Site supervisor and workers
• Ensure compliance with construction safety standards and local regulations
• Coordinate with architects, engineers, and other stakeholders to ensure seamless execution
• Monitor project budget and expenditures
• Prepare and submit cost estimates, progress reports, and budgetary updates
• Negotiate contracts and manage procurement of materials and equipment
• Ensure that all construction work meets the required standards of quality
• Perform site inspections and resolve any on-site issues
• Ensure timely delivery of the project while maintaining quality benchmarks
• Maintain clear communication with the client, providing regular updates on project progress
• Manage conflicts and issues that arise between the construction team and stakeholders
• Ensure all project documentation is up-to-date and properly filed
• Ensure all construction work complies with safety regulations and legal requirements
• Respond to emergencies and implement contingency plans.
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Degree/Diploma in Civil, Construction, or a related field
• Minimum 3 years and above experiences in construction project management or a related role
• Proven experience managing large-scale construction projects
• Strong knowledge of construction methods, materials, and regulations
• Excellent leadership, organizational, and communication skills
• Proficiency in project management software (e.g., MS Project, AutoCAD, or similar)
• Ability to manage budgets, contracts, and timelines effectively
• Problem-solving skills with the ability to handle high-pressure situations
• Ability to visit construction sites and manage on-site tasks as needed
• Willingness to work long hours, including weekends, to meet project deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

Job Responsibilities

• Carry out site visits and inspections for cooling tower and related ACMV projects, as required

• Prepare, review, and interpret basic AutoCAD drawings, layouts, and technical details for cooling tower installations

• Assist in identifying and resolving technical issues, discrepancies, or unexpected site conditions during project execution

• Provide technical support and coordination to internal departments, including Sales, Operations, and Project teams

• Support documentation preparation, technical submissions, and project records
  

Job Requirements

• Entry-level candidate with an Engineering background (Mechanical / Electrical / Building Services preferred)

• Basic working knowledge of AutoCAD

• Proficient in Microsoft Office (Word, Excel, PowerPoint)

• Able to work independently and manage assigned tasks responsibly

• Willing to learn site practices, cooling tower systems, and ACMV applications

Job Description & Requirements

• Liaise with subcon to plan, arrange and carry out construction activities.
• Liaise with design department to confirm and clarify design issues.
• Record work done.
• Ensure quality of work done conform to specifications.
• Able to coordinate well with other departments.
• Liaise with Safety team to maintain temporary facility and prevent unsafe work.
• Handle any other ad-hoc duties and tasks assigned.
• Willing to travel to different project site if required.

Requirements:

1. Min Diploma in Mechanical Engineering or equivalent

2. All are welcome to apply

3. Willing to work on Weekends when required

Company Overview

The client specializes in fabrication of steel structures for marine and offshore industries, delivering quality engineering solutions tailored to complex project requirements.

Job Summary

You will manage and coordinate engineering projects, ensuring compliance with standards and client requirements while producing accurate technical drawings and calculations to support the engineering team.

Responsibilities

• Prepare, schedule, coordinate, and monitor assigned engineering projects to ensure timely and quality delivery
• Monitor compliance with applicable codes, QA/QC policies, performance standards, and specifications to maintain project integrity
• Engage with clients to interpret and clarify their needs and technical requirements for project alignment
• Create technical drawings by following specifications and performing necessary calculations for materials and weight limits
• Develop rough sketches and detailed designs using CADD systems to support engineering documentation
• Collaborate with the engineering team to prepare, review, and draft project-related documents and drawings
• Identify potential design issues and communicate them proactively to the engineering team for resolution
• Perform additional duties as assigned by immediate managers or superiors to support company operations and business goals.

Qualifications & Requirements:

·          Degree / Diploma in Engineering (Degree Preferred)

·          Preferably 2years of experience in oil & gas industry / preferable in fabrication environment

·          Knowledge of ISO9001:2008 QA system

·          Software–AutoCAD, MS Office

·          Drafting skill

·          Willing to go extra mile to meet customers’ requirements

·          Strong communication skills. English speaking and writing are a must. Chinese speaking preferred to communicate with Chinese vendors / suppliers.

·          Resourceful, independent and detail oriented.

• DEGREE IN ELECTRONIC / MECHANICAL PRODUCTION ENGINEERING
• GOOD KNOWLEDGE OF ELECTRONIC CONTROL & SOME KNOWLEGE OF ELECTRICAL
• EXPERIENCES IN PRODUCT DESIGN FROM DRAWING TO FINISH USING 2D/3D AUTOCAD OR SOLIDSWORK SOFTWARE
• SMALL SCALE INDUSTRIAL OR HOME APPLICANCES DESIGN
• INDEPENDENT AND TROUBLE-SHOOTING AND ABLE TO WORK IN FAST-PACED R&D ENVIRONMENT
• PLACE OF WORK - WILL MOVE TO CENTRAL BY END OF YEAR

- Required to be able to communicate in English

- dedicated to work and working on construction site

- supervising, planning and submission of works related matter

- is good to have driving license

- with related work experience

- able to liaise and communicate with foreign workers

- required to work OT when it is necessary

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.