Total 2,477 job vacancies in Singapore

Job Summary 

We are looking for a QC Equipment Qualification Specialist to support qualification, lifecycle management, and decommissioning activities for Quality Control laboratory equipment within a GMP-regulated manufacturing environment. 

This role will support the execution and coordination of qualification activities, change control, validation documentation, and equipment lifecycle compliance. The successful candidate will work closely with QC, Validation, Engineering, Quality Assurance, and external vendors to ensure laboratory equipment is qualified, documented, and maintained in accordance with site and regulatory requirements. 

Your Missions 

• Support qualification activities for QC laboratory equipment in accordance with GMP, validation lifecycle, and change control requirements. 

• Coordinate and execute equipment qualification activities including IQ, OQ, and PQ where applicable. 

• Support decommissioning activities for QC laboratory equipment following approved procedures and compliance requirements. 

• Assist in defining project plans, timelines, documentation needs, and coordination activities for qualification and decommissioning projects. 

• Prepare, review, and maintain qualification protocols, reports, SOPs, risk assessments, and training materials. 

• Support deviations, investigations, CAPA, and change control activities related to laboratory equipment and qualification processes. 

• Review qualification and validation documentation to ensure completeness, traceability, and compliance with GMP and site quality expectations. 

• Collaborate with QC, Validation, Engineering, Quality Assurance, and vendors to ensure timely execution of project activities. 

• Ensure proper documentation practices, data integrity, and compliance standards are followed for laboratory equipment systems. 

• Support equipment integration activities where applicable, such as LabX connectivity or related laboratory data systems. 

• Track action items, project milestones, risks, and implementation progress to support delivery within agreed timelines. 

Your Profile 

• Bachelor’s degree in Engineering, Life Sciences, Biotechnology, Pharmaceutical Sciences, Chemistry, or a related discipline. 

• 5–8 years of experience in qualification, validation, commissioning, or lifecycle management within GMP-regulated manufacturing or laboratory environments. 

• Hands-on exposure to QC laboratory equipment qualification and validation activities. 

• Good understanding of GMP documentation, validation lifecycle, change control, deviation, and CAPA processes. 

• Experience preparing or reviewing qualification protocols, reports, SOPs, risk assessments, or validation documentation. 

• Familiarity with analytical or laboratory equipment such as continuous flow analysers, nitrogen analysers, TOC systems, gas generators, analytical balances, microbalances, or similar laboratory instrumentation would be an advantage. 

• Exposure to laboratory system integration platforms such as LabX or related laboratory software systems is preferred. 

• Strong documentation, coordination, and stakeholder communication skills. 

• Detail-oriented, organized, and comfortable working within structured quality and compliance environments. 

• Able to manage multiple tasks and timelines within project-based environments. 

What We Offer 

• An international community bringing together 110+ different nationalities. 

• An environment where trust has a central place: 70% of our key leaders started their careers at the first level of responsibilities. 

• A robust training system with our internal Academy and 250+ available modules. 

• A vibrant workplace that frequently gathers for internal events, afterworks, and team buildings. 

• Strong commitments to CSR, notably through participation in our WeCare Together program. 

As an Advanced Packaging Characterization Engineer within Advanced Packaging Technology Development (APTD), your responsibilities include but are not limited to providing package development characterization and failure analysis support for development test vehicles, qualifications, customer returns, new product introduction, and general test failures. You are the domain expert on advanced packaging characterization methodology and is responsible for establishing relevant analysis methods needed to support technology development. You will also have a thorough understanding of the product package assembly and process flow, to work with Process Integration, Process Development, and Product Engineering groups ensuring failures are classified and root cause fixes implemented.

Responsibilities and Tasks

Conduct Electrical Characterization

• Understand PFA techniques available for de-processing failures

• Understand assembly and test process

• Perform electrical verification to confirm failures

• Establish best known method for de-processing package

Provide Data Analysis

• Understand backend test flows, qualification methodologies and be able to pull relevant information

Communicate with Internal/External Groups

• Document failure analysis techniques used to isolate failure for other groups

• Quick, responsive analysis and feedback of PFA results to Product, Process Integration, Reliability, Assembly, RMA, and QRA

• Ensure the PFA lab understands best method to obtain results and ensure lab is ready for analysis of new designs

Provide Technical Expertise

• Conduct TMO training and FA certification

• Serve as technical SME and mentor, contributing to the growth of technical capabilities within the team and fostering a culture of continuous learning.

• Participate actively in technical events such as conferences, workshops and forums to share knowledge and BKM across the network.

• Engage industry experts and vendors on cutting-edge FA tools and techniques required for Advanced Packaging development roadmap.

Maintain Equipment

• Coordinate calibrations (external to Micron)

• Procure parts as needed

• Coordinate host vendors to support equipment repair

Manage Laboratory

• Consistently upholds and promotes Micron’s safety standards, ensuring all activities are conducted in a safe and compliant manner.

• Manage laboratory to comply with TS, ISO14001 and OHSAS requirements.

• To manage the exhaust and scrubber systems of the FA Lab.

• To maintain records and procedures as per Micron GOPs

Education and Experience

• PhD, Master’s, or Bachelor’s degree in Materials Science, Chemical Engineering, Electrical/Electronics Engineering or related discipline. 

• 4+ years of experience in the semiconductor process, preferably in R&D or technology development or failure analysis field, with strong expertise in failure analysis methodologies and techniques.

• Hands-on proficiency with key analytical tools and methods, including: SEM, EDX, FIB, TEM, AFM, FTIR, XPS, X-ray, CSAM, Ion Milling, delayering, and decapsulation techniques.

• Strong communication skills with the ability to collaborate effectively across internal teams and external partners.

• A mindset that emphasizes customer focus, continuous improvement, and striving for excellence.

Role Overview

We are looking for an Associate Test Engineer / Technician to handle the calibration, testing, and troubleshooting of our high-tech systems and components. You will work from technical drawings to ensure product quality, resolve technical issues, and document your findings.

Key Responsibilities

• Set up, calibrate, and test electronic circuits, mechanical assemblies, and final systems.

• Troubleshoot technical issues, identify root causes, and perform necessary rework.

• Interpret blueprints, drawings, and schematics to determine or develop test procedures.

• Prepare technical reports summarizing test results and solutions.

• Assist in selecting and setting up specialized test equipment.

Job Requirements

• Diploma or Bachelor’s Degree in Engineering.

• Hands-on experience with semiconductor equipment.

• Ability to read technical drawings and use precision measuring instruments.

• Strong troubleshooting and data analysis skills.

• Good communication and teamwork skills.

• Comfortable working in a cleanroom environment and committing to shift hours.

Preferred Skills (Optional)

• Experience with optics alignment is a strong plus.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

about the company

My client is a specialized manufacturer in the contract manufacturing space. They are a Singapore based company and with their innovative technology, this is a great brand to join at an exciting time in their development.

about the job

• Plan, coordinate and oversee all Quality Assurance activities in the Company
• Oversee the Documentation Control function for Quality Management System
• Act as the Quality Management Representative for the Company
• Develop and implement plans to collect quality data at in-process, final inspection, test and inspection stations
• Plan and execute annual Internal Audit to ensure all quality systems and procedures are effectively implemented and auditable at all times
• Manage first article inspections and sample evaluation activities
• Develop and implement system for receipt and processing of complaints and recall of products
• Participate in all new Projects, including giving inputs from quality perspectives, performing PFMEA etc
• Implement and maintain ISO 9001, ISO 13485 QMS, and ISO 14001 EMS compliance

job requirement

• Degree in Engineering or equivalent
• Manufacturing background from plastics injection medtech manufacturing environment
• High volume manufacturing environment
• Must possess ISO13485 certification

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Responsibilities:

• Plan, execute, monitor, and control all technical aspects of projects.
• Lead or contribute to new system/network infrastructure setups or upgrades.
• Support operational systems in line with contractual Service Level Agreements (SLAs).
• Conduct routine preventive maintenance and manage operational activities efficiently.
• Prepare comprehensive project documentation and reports.
• Troubleshoot and resolve technical issues promptly.

Requirements:

• Strong knowledge of Windows Server OS and Linux OS; experience in virtualized environments is a plus.
• Hands-on experience with virtualization, hypervisors, and the Nutanix platform is an advantage.
• Understanding of VPNs and firewall appliances is beneficial.
• Familiarity with network switches and routers is preferred.

Contract Duration: 2-3 months (Potential extension of 1 month)

Work Location: Yishun / Bedok / Bukit Batok (assignment location to be confirmed)

Key Responsibilities:
• Audit and optimise Active Directory (AD), DNS, and Group Policy configurations
• Import, test, and deploy standardised GPO templates across infrastructure environments
• Support pilot testing and resolve endpoint or application conflicts
• Execute domain-wide policy updates and infrastructure configuration alignment
• Perform baseline scans, gap analysis, and troubleshooting activities
• Maintain AD, DNS, and DHCP services across physical, virtualised, and cloud environments
• Prepare documentation, compliance reporting, and configuration records

Requirements:
• Experience supporting Windows Infrastructure / Server environments (2-4 years preferred)
• Hands-on experience with Active Directory Domain Services (AD DS), DNS, and DHCP
• Strong knowledge of Group Policy Object (GPO) administration
• Familiarity with Windows OS hardening practices (CIS benchmarks preferred)
• Intermediate PowerShell scripting experience for automation and remote administration
• Experience with CIS-CAT, Nessus, or Microsoft Security Compliance Toolkit is advantageous

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret to inform that only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Principal Engineer / Manager, Defect Detection & Yield Engineering

Key Responsibilities

• Lead defect detection and yield improvement initiatives across semiconductor manufacturing operations.

• Drive root cause analysis and corrective actions for process and quality excursions.

• Analyze defect and yield data to identify trends and improvement opportunities.

• Partner with Process, Manufacturing, Quality, and Engineering teams to improve operational performance.

• Support implementation of advanced inspection and monitoring solutions.

• Develop best practices and mentor engineers within the organization.

Requirements

• Degree in Engineering, Materials Science, Physics, or related discipline.

• 7+ years of semiconductor manufacturing, yield, process, or defect engineering experience.

• Strong analytical, problem-solving, and stakeholder management skills.

• Experience in defect analysis, process monitoring, and yield improvement.

• Ability to lead cross-functional initiatives in a fast-paced environment.

The Network Operations Engineer III is a senior-level role that focuses on the operation, maintenance, and troubleshooting of both optical and IP networks. This position demands a high degree of independence, accuracy, and attention to detail. The engineer will address a wide range of complex network issues, working on diverse problems with minimal supervision.

This role requires a deep understanding of optical and IP networking, hardware technologies, and network management tools.

Scope: 

• Resolve a wide range of network issues creatively and effectively.

• Monitor the performance and health of optical and IP networks using advanced network management tools.

• Tackle diverse and complex problems, applying sound judgment and innovative solutions.

• Operate with minimal guidance on daily tasks, requiring only general instructions for new assignments.

• Troubleshoot and resolve network issues to ensure minimal downtime and service disruptions.

Roles and Responsibilities:

Network Management:

• Manage and optimize hardware technologies to maintain network performance and capacity.

• Engage in day-to-day troubleshooting, working with multiple vendor equipment, and resolving various software and hardware issues.

Issue Resolution:

• Address network traffic issues and respond to queries raised by XFNs and partners.

• Collaborate with XFNs and vendors to resolve network-related problems promptly and effectively.

• Conduct root cause analysis for network outages, providing detailed reports and solutions.

Cross-functional Collaboration:

• Work closely with service providers, colocation facilities, and XFNs globally, ensuring seamless network operations.

• Support network infrastructure projects and collaborate with cross-functional teams on new network initiatives.

Additional Duties:

• Take on other duties as required, contributing to the overall success and reliability of the network infrastructure.

Required Qualifications/Skills:

• Bachelor’s degree with 5 to 8 years of related experience and/or training; or an equivalent combination of education and experience.

• Proven experience in optical networking (DWDM, CWDM) and IP networking (IPv4/IPv6, MPLS, BGP, OSPF).

• Strong judgment in selecting appropriate methods and techniques for obtaining network solutions.

• Comprehensive understanding of fiber-optic technology, including cable types,connector types, optic types, patch panels, and optical transport technologies.

• Experience in preparing root cause analysis reports for network and server outages.

• Strong communication skills, capable of effectively working with global service providers, colocation facilities, and ISPs.

Preferred Qualifications: 

• Experience working in a multi-vendor network environment.

• Relevant network certifications such as CCNA, CCNP, JNCIA, JNCIP, OCA, orequivalent.

·     
Job Description

·      Join the Software Engineering team on a physical Operations Technology (OT) integration project. 

·      You will build and maintain the backend systems that connect OT field devices to the digital twin platform — handling real-time data ingestion, protocol translation, and system integration across industrial communication standards. 

 Key Responsibilities

·       Develop and maintain backend services and middleware for OT/IoT data ingestion using OPC-UA, MODBUS, and MQTT protocols. 

·      Build data pipeline components that normalise, process, and route telemetry from field devices to platform services and 3D visualisation layers. 

·       Integrate AI coding tools (e.g. Claude, Copilot) into daily development workflows for code generation, unit testing, and validation — this is an expected practice, not optional. 

·      Write and maintain automated test suites covering protocol adapters, data transformation logic, and integration endpoints. 

·      Collaborate with frontend Unity engineers and systems architects to define and implement API contracts (REST/WebSocket). 

·      Participate in code reviews, contribute to technical documentation, and support deployment through CI/CD pipelines. 

·      Troubleshoot field connectivity and protocol issues; work with OT/hardware teams on device commissioning and debugging. 

Required qualification/skills:: 

·      Hands-on experience with OPC-UA, MODBUS, and MQTT — protocol implementation, not just conceptual familiarity. 

·      Proficiency in backend development (Python, Node.js, Go, or Java — at least one). 

·      Active use of AI tools for coding, testing, and validation in prior roles or personal projects. 

·      Experience writing integration and unit tests; familiarity with test automation frameworks. 

·      Comfortable working with message brokers (MQTT brokers, Kafka, or similar) and time-series or event-driven data. 

 Good to Have:: 

·      Exposure to digital twin platforms or industrial IoT stacks. 

·      Familiarity with OT security considerations (network segmentation, secure protocol configuration). 

·      Experience with containerisation (Docker/Kubernetes) and CI/CD tooling. 

·      Knowledge of BACnet, DNP3, or other industrial protocols. 

Experience Required:: 

·      2–5 years in backend or systems software engineering, with at least some exposure to OT/IoT environments.

·       Degree in Computer Science, Engineering, or equivalent practical experience.

Key Highlights | AI Algorithms Engineer (PHD Holder Only)

• 5 Work Days Per Week
• Office Near to Kaki Bukit MRT, Singapore
• Relocate Near Tai Seng MRT in August / September 2026
• Medical Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Current Teams are focusing projects on AI Agent, Computer Vision, Vision Language Models (VLMs)

Job Responsibilities:

1. Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems.
2. Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy.
3. Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work.
4. Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products.
5. Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company's competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition.
6. Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders.

Job Requirements:

• Min Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field.
• Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations.
• Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills
• Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc.
• Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems.
• Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus
• Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus.
• Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits.
  
  

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.

Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe.

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.

Join a dynamic healthcare laboratory environment where you will play a vital role in supporting laboratory operations and ensuring the smooth processing of clinical specimens. This is an excellent opportunity for individuals with a background in biomedical sciences or biotechnology who enjoy working in a detail-oriented and patient-focused setting.

Key Responsibilities

• Support daily laboratory operations under the guidance of laboratory professionals and supervisors
• Assist with specimen collection, processing, and preparation for laboratory testing
• Perform patient registration, documentation, and other administrative duties as required
• Conduct phlebotomy procedures when assigned, ensuring a professional and positive patient experience
• Verify patient information and maintain strict confidentiality in accordance with healthcare standards
• Liaise with healthcare professionals to clarify laboratory requests and ensure accurate specimen processing
• Communicate laboratory information accurately while adhering to established reporting and verification protocols
• Maintain accurate records and ensure compliance with laboratory procedures and quality standards

Requirements

• Diploma in Chemical Process Technology (CPT), Biotechnology, Biomedical Science, or a related discipline
• Strong communication and interpersonal skills
• Meticulous, organized, and comfortable working with data and numerical information
• Proficient in Microsoft Office applications
• Able to thrive in a fast-paced healthcare environment

Interested applicants are invited to submit their updated resume to healthcaretemps@recruitexpress.com.sg with the subject header: Laboratory Operations Assistant

We regret that only shortlisted applicants will be contacted.

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd
EA License No. 99C4599

Role Overview

We are looking for an experienced Electrical Field Engineer to support an HVDC / Grid Solutions project. The engineer will be site-based and act as the key technical interface between construction, commissioning, engineering teams, contractors, and clients.

The role focuses on supporting installation, troubleshooting, and commissioning activities related to S2 work packages, ensuring technical issues are resolved effectively and properly documented.

Key Focus

• Special focus for S2 work package

• Focus on all issues related to the installation/Erection of the equipment activities and interfaces/coordination within packages/systems, and with related activities in the scope of Partner & Contractor.

• Ensure a daily monitoring in direct contact with the site teams and the partner(s) & Contractors in his field of activity.

• Provide close support and follow up to the engineering department by proposing documented solutions, and could as well update or prepare, as appropriate, SMFs under the supervision of the assigned engineering office.

Other actions

• Support to the Site Manager during technical meetings involving the client, partners, and subcontractors.

• Collaboration with the Quality and Document Control teams

• Ensures strict adherence to the change management process and the proper maintenance of "As-Built" (marked-up) documentation.

• Participates in technical and coordination meetings related to his engineering activity(ies), as well as those concerning general site operations and mandatory training sessions.

• Ensures that the GFC/SQ/SMF/Red Lines processes are used correctly

• Participates when required to GFC/SQ/SMF/RMU meetings with Site/engineering teams

• Supports all EHS (Environment, Health, and Safety) initiatives and ensures that all solutions to be implemented comply with applicable safety regulations

Requirements

• Degree in Electrical Engineering or related discipline.

• Experience in HVDC, substations, power transmission, or large-scale electrical projects.

• Similar experience on OCP or OCS station or large AC projects

• Experience in site-based engineering, commissioning, or construction support preferred.

• Knowledge of LV secondary systems, protection & control, cabling, and electrical installation preferred.

• Strong understanding of electrical drawings, schematics, cable systems, and equipment interfaces.

• Strong troubleshooting, communication, and coordination skills.

• Understanding of technical documentation related to the activity (SLD, Layouts and Erection drawing, Principles, Mechanical specifications, Equipment data sheets, BoM, OMM etc)

Project Details

• Start Date: ASAP

• Working Hours: 6 days/week, 54 hours/week

• Overtime: Paid when working beyond 54 hours/week

• Site Allocation: Singapore with occasional travel to Batam worksite

• Contract length: 1 year (Extendable)

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Position Overview:

We are seeking a skilled Microsoft Dynamics 365 SoftwareEngineer to design, develop, and maintain customised solutions within theDynamics 365 CRM ecosystem. The successful candidate will work closely withbusiness and Infocomm Technology stakeholders to translate requirements intotechnical solutions whilst ensuring system performance, security, andscalability.

Responsibilities

• Drive and contribute to the implementation of Microsoft Dynamics 365 solution for CRM module, including gathering requirements, designing and development, module configurations or extensions to the standard Microsoft Dynamics applications and ensure all functionalities work effectively with all other integrated/interfaced applications.
• Responsible for development, deployment, testing and technical documentation for operations and support of the MD365, and related application integrations.

• Customization and Configuration:
• Utilize your expertise in SQL and .NET to customize MD365 forms, entities, fields, forms, view, workflows, and queries to meet business requirements.
• Implement plugins, custom workflows, and integration solutions to extend MD365 functionalities.
• Customize workflows to align with business processes.

• Integration:
• Develop integration solutions to connect MD365 with other business applications, leveraging SQL databases and .NET frameworks using APIs, web services, and middleware solutions to ensure seamless data flow across platforms.

• Technical Support and Maintenance:
• Provide technical support to post-implementation, troubleshoot issues, and perform system upgrades and patches.
• Ensure the stability, performance, and security of MD365 systems.

• Documentation:

·       Createcomprehensive documentation including system architecture, configurations, andcustomizations for reference.

·       SystemPerformance Improvements:

·       Conductproduct evaluations of upgrades to the MD365 system.

• DevOps practices including CI/CD pipeline implementation, automated testing, and deployment using modern development tools
• Manage performance tuning and capacity planning activities to enhance the performance of the MD365 platform.
• Analyze user support statistics and related data to recommend appropriate measures.

The ideal candidate should:

• Possess a Bachelor's degree in Computer Science, Information Technology, or related field.
• Minimum of 3-5 years of technical working experience in cloud or web applications development
• Strong proficiency in MS SQL for data manipulation, querying, and reporting.
• Experience with .NET framework and development languages such as C# for customization and integration tasks.
• Strong DevOps background with hands-on experience in GitLab, Confluence, JIRA, X-Ray, security scanning tools, and automated testing frameworks  
• Has completed at least 2 end-to-end full life cycle implementations of Microsoft Dynamics 365
• Possess Microsoft Dynamics 365 Certifications (MB-500, MB-820) and in-depth understanding of MD365 concepts, modules, and functionalities.
• Familiarity with SHIP-HATS and AWS cloud services is advantageous
• Ability to work with functional teams
• Excellent verbal/written communication, collaboration, analytical, problem solving and presentation skills

·      Demonstrates resilience andoptimism in the workplace.

Hiring: Air-Conditioning and Refrigeration Engineer

Must have 3-5 years of experience in air conditioning maintenance

Salary composition:

Basic Salary: 3800-4500 SGD + OT including allowances

Monday to Saturday 9am-6pm

Good work culture

Friendly boss and co-worker

Fast growing company with great potential!

Job Scope:

Servicing of air conditioner units

Topping up coolant / gas for compressors

Fixing of leaking air conditioner units

Fixing of air conditioner units that are not cold

Installation of new air conditioner units / replacement aircon units

Qualify leads and set meetings by qualifying key decision-makers to penetrate accounts and develop new prospects.

Lead and accurately record contact information in the company CRM

Must have:

- 3-5 years of experience in air conditioning maintenance

- Self motivated

Job Summary

About the Role

The Institute of High Performance Computing (IHPC), A*STAR, is seeking a highly motivated Research Engineer to develop and deploy advanced AI systems that translate cutting-edge research into scalable real-world applications.

The successful candidate will work closely with research scientists to implement, optimize, and operationalize AI models across healthcare and biomedical domains. This role combines software engineering, machine learning, and systems engineering to bridge the gap between research and deployment.

Key Responsibilities

AI System Development

• Design, develop, and maintain machine learning and deep learning systems.
• Implement state-of-the-art AI algorithms from research prototypes into production-quality software.
• Build scalable data processing and model training pipelines.
• Develop multimodal AI systems integrating text, image, video, sensor, and structured data.
• Optimize model training, inference, and deployment workflows.

Research Translation

• Collaborate with AI researchers to translate novel algorithms into robust software solutions.
• Reproduce and benchmark research models.
• Develop reusable AI frameworks, libraries, and tools.
• Support experimentation, model evaluation, and performance optimization.

Software & Infrastructure Engineering

• Design scalable cloud and on-premise AI infrastructure.
• Develop APIs, backend services, and model-serving platforms.
• Implement automated testing, monitoring, and CI/CD pipelines.
• Support large-scale distributed training and inference systems.

Deployment & Integration

• Deploy AI solutions into healthcare, scientific, and enterprise environments.
• Integrate AI systems with operational workflows and external platforms.
• Develop monitoring tools for model performance and reliability.
• Support technology transfer and production deployment activities.

Requirements

Essential

• Bachelor's or Master's degree in Computer Science, Computer Engineering, Artificial Intelligence, Data Science, or related disciplines.
• Strong programming skills in Python.
• Experience with PyTorch, TensorFlow, or similar machine learning frameworks.
• Experience in software engineering best practices.
• Familiarity with Linux, Git, and software development workflows.
• Strong problem-solving and system design skills.

Preferred

• Experience with:Large Language ModelsMultimodal AIComputer VisionMLOps platformsCloud Computing (AWS, Azure, GCP)Containerization (Docker, Kubernetes)Distributed ComputingGPU Computing

What We Offer

• Opportunity to work on cutting-edge AI technologies with real-world impact.
• Access to world-class computational infrastructure and research facilities.
• Collaboration with leading researchers, clinicians, scientists, and industry partners.
• A dynamic environment supporting innovation, learning, and career growth.

Job Description

• Industry/ Organization Type: Industrial Equipment Manufacturer
• Position Title: HVAC Solutions Sales Engineer
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 8.30am – 5.30pm)
• Salary Package: Basic salary up to $5,500 + Transport Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Identify and reach out to potential clients across sectors such as commercial, industrial, and residential
• Plan and carry out sales strategies to meet sales targets and grow market share
• Work with the engineering team to develop solutions that match client needs
• Lead site surveys with subcontractors and vendors for HVAC upgrading projects (e.g., chiller plant, airside)
• Prepare and present technical briefings and proposals to clients
• Manage the full sales process from lead generation to closing
• Prepare and negotiate sales contracts in line with company policies and customer requirements
• Prepare regular sales reports and forecasts for management review
• Carry out other duties assigned by the reporting manager

APPLY NOW!!!

• Degree in Mechanical / Electrical / Energy Engineering or equivalent
• 2–4 years of experience in the HVAC industry
• Customer-focused mindset
• Strong communication and interpersonal skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82095 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Process engineer plays a vital role in D2W hybrid bonding process optimization, yield improvement and to develop innovating process flow or path finding. PE Works closely between internal Hybrid team, partner and Customers.

• Responsible for process development & CIP’s to improve the product yield
• To conduct DOE’s and experimental process trails and data analysis
• Define new process flow for customer products and run internal feasibilities
• Provides technical subject matter expertise in the area process developments
• Understands the Hybrid bonding upstream & downstream process flow to relate actual Hybrid bonding or Fusion bonding yield related topics
• Process optimization and data analysis to improve the process responses hybrid bonding and annealing
• Supports SOP, technical documentation and product operating manual writing activities and publish BKM process flow
• Builds-up technical know-how on product/problem solving via structured knowledge transfer between the on-site support team
• Machine and Technical Support
• Machine operation and application/product setup
• Prepares and executes customer demo feasibilities and recommend the process flow
• Coordinates and provides technical solutions / problems solving on customer process related issues in collaboration with Field issues
• Investigates process issues at customer site and supports Engineering team

Education

• Master’s in mechanical/electrical/Electronics /Physics or PHD

Work experience

• Minimum 5 years relevant experience in C2W or W2W hybrid bonding and Front end wafer fab/backend process
• Significant practical experience in solving process issues and process optimizations including new process setup
• Hands-on experience in semiconductor front end or backend Process and equipment’s including defectivity & yield engineering

Expertise and methodology

• Good in MS-Office, data analysis SW like JMP, Matlab
• Hands-on Process Development Expertise and able to share the Problem Statement in crystal clear

EA License : 02C3423

EA Personnel : R22108699

As Frontend Central Product Integration Engineering and transformative (CPIE) team at Micron Technology, Inc., you will be leading new initiatives to deliver pioneering process capability, best-in-class bits per wafer (Yield) with the highest quality and fastest speed through innovation and collaboration with multi-functional teams. Your primary focuses include but not limited to:

Initiate new data solutions and methodologies to:

• identify process, test, and design improvement opportunities, specialized in UE_ROW & all quality index, Front End-PTS integration, and high-value-bits (PG2+) yield;

• modeling, monitoring and aiming for tool performance benchmarking;

• Process equipment prognostics and process integration optimization;

• Identity test optimization opportunities for high product grade yield improvement.

• Collaborate with site Process & Equipment Engineering, Manufacturing(MFG), Product Integration Engineering (PIE) and Data Science (DS) team to establish feasibility of new initiatives, demonstrate business values, and prototype solution mock-ups;

• Partner with Global Quality (GQ), Product Engineering (PE), Central PEE(CPEE), Smart Mfg Artificial Intelligent (SMAI), Technology Development (TD), and Suppliers to deliver end to end solutions, implement BKM development and deployment to production.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness,exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabledenhancements within one’s scope of work.

Collaboration

• Partner closely with multi-functional teams to ensure successful communication and collaboration for project implementation.

• Detail oriented with the ability to work independently

• Dependability and able to work effectively in multi-functional teams.

• Facilitate and lead activities in designing and optimizing current system, methods, tool, skill to be Best In industry.

• Manage priorities and enhancements to improve business processes and existing systems that are global in nature.

• Willing to work during non-standard hours when needed to provide support to engineering teams at any Micron site.

• Strong growth mindset and willing to continue to learn, unlearn, relearn.

Communication

• Effective communication skills in verbal/written.

• Self-motivated. Able to work independently with minimal supervision.

• Able to travel as required to support department and company objectives.

Requirement and Technical Competency:

• Experience in PIE, Test solution team, product engineering and circuit design engineering. Understanding of Process/Product Integration will be advantageous;

• In depth knowledge of processes, equipment and control system;

• Proficiency in data analytical tools such as Y3, JMP, Python to perform numerical experiment. Proficiency in Statistical/Machine Learning will be additional advantageous; 

• Proven track record to make decisions, multi-task, and solve problems and address root causes.

• Exhibit critical thinking to find opportunities.

• PhD/Masters/Bachelors with relevant course of study and experience

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

Job Description

• Industry/ Organization Type: Industrial Equipment Manufacturer
• Position Title: Service Sales Engineer (Retrofit)
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 8.30am – 5.30pm)
• Salary Package: Basic salary up to $4,800 + Transport Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Carry out project design work (including selecting and sizing equipment) and support project development based on customer requirements
• Understand the HVAC work scope for bidding and tender submissions
• Conduct site surveys and take site measurements; attend pre-bid walkthroughs when needed
• Attend tender clarifications or interviews when required
• Work with the Manager to develop the project plan, budget, and schedule
• Coordinate with Sales / Customer Consultants / management to prepare project proposals, tender submissions and clarifications, and contract documents
• Work with Sales / Customer Consultants to prepare quotations and follow up on retrofit service opportunities with customers
• Track project progress regularly and prepare status reports for management
• Work with Sales / Customer Consultants and management to ensure projects are completed within the approved budget and timeline, and according to plans and specifications
• Propose cost-saving ideas while maintaining quality and productivity
• Source, liaise, and negotiate with suppliers and vendors on quotations and requirements
• Compile supplier quotations, review and compare quotations, and prepare costing sheets
• Maintain good working relationships with subcontractors, vendors, and clients
• Maintain estimating records and unit costs for all projects
• Prepare the Bill of Quantities (BOQ)
• Follow company policies and workplace safety requirements to support efficient operations
• Research and recommend suitable new technologies to support project development work
• Perform other duties as assigned

APPLY NOW!!!

• Degree / Diploma in Engineering or Building-related studies
• Relevant experience in the HVAC / ACMV industry, with working knowledge of HVAC / ACMV systems
• Knowledge of different types of HVAC systems and their components
• Able to read and understand mechanical drawings and other construction documents
• Knowledge of commercial HVAC / mechanical contracting
• Minimum 2–3 years of relevant experience
• Project management knowledge/experience is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82097 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Perform regular checks and diagnostic activities on security systems (such as CCTV and access control) to ensure they are in good working condition.
• Set up security equipment, configure systems, and conduct testing on-site.
• Provide both front and backend support for security, video management systems (e.g., Milestone XProtect), and communication infrastructure.
• Attend to, diagnose, and resolve onsite technical issues/faults within established Service Level Agreements (SLAs).
• Prepare daily maintenance reports and maintain accurate records of service activities.
• Comply with company policies and safety regulations, ensuring work does not interrupt production.

Requirements

• Min Nitec in Information Technology, Computer Engineering, or related technical fields.
• Basic knowledge of IT networking, security systems, and troubleshooting

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Support the deployment and implementation of AI infrastructure and data centre projects.
• Coordinate project activities with customers, distributors, vendors, technology partners, and internal engineering teams.
• Assist in the design and implementation of AI computing solutions, including GPU servers, storage systems, networking equipment, and cooling infrastructure.
• Participate in customer meetings, technical discussions, and project planning activities.
• Prepare technical proposals, system architecture designs, deployment plans, and project documentation.
• Manage project schedules, milestones, deliverables, and progress reporting to ensure timely project execution.
• Coordinate and oversee Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
• Support installation, commissioning, troubleshooting, and maintenance of AI infrastructure solutions.
• Collaborate closely with global technology partners and OEMs to ensure successful project delivery and system integration.
• Ensure compliance with customer requirements, industry standards, and project specifications.
• Provide post-deployment technical support, issue resolution, and project follow-up to maintain customer satisfaction.

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering, Computer Engineering, Information Technology, or related disciplines.
• Min 2 years of experience in project engineering, systems integration, data centres, IT infrastructure.
• Knowledge of servers, networking, storage systems, power distribution, cooling systems, or data centre infrastructure.
• Familiarity with AI computing platforms, GPU technologies, and high-performance computing environments will be an advantage.
• Require to travel locally and overseas when required.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

You will be a key technical reference for the design,implementation, and day‑to‑day operations of our global network and securityinfrastructures, supporting a highly distributed, international environment.

Role Synopsis and profile

As a Network & Security Expert within the Corporate IT Infrastructures team, you will:

Design & operate network infrastructure

• Design, implement, and operate LAN/WAN architectures
• Manage and optimize cloud connectivity (interconnection with public clouds)
• Act as Routing (BGP) expert, ensuring performance, resilience, and scalability
• Contribute to the design, rollout, and tuning of SD‑WAN solutions
• Lead regional network projects and collaborate with international IT teams

Design & operate security infrastructure

• Operate and improve firewalling solutions in line with IT security policies
• Manage and secure IPSec / SSL VPN for remote sites and users
• Contribute to SASE architecture design, deployment, and operations

Operations & Performance

• Operate network, security, and related system components on a daily basis
• Monitor infrastructure health and performance (capacity, latency, availability)
• Proactively identify bottlenecks and implement optimizations and improvements
• Ensure a high level of availability and service continuity for critical services

Incident & Problem Management

• Acknowledge, qualify, and categorize incidents and service requests
  
• Troubleshoot complex network and security issues (L2–L4+)
  
• Coordinate escalation to internal and external experts/vendors when necessary
  
• Contribute to root‑cause analysis and long‑term corrective actions

Support & Collaboration

• Provide Level 3 expertise and support to local IT teams worldwide
  
• Advise users and managers on new products, solutions, and best practices
  
• Train IT staff and key users on network and security solutions
  
• Work closely with cross‑functional project teams (infrastructure, applications, security, etc.)

Documentation & Governance

• Produce and maintain up‑to‑date technical documentation (diagrams, procedures, standards)
  
• Contribute to the definition and application of IT policies and standards
  
• Provide regular reporting to Infrastructure Managers (status, risks, improvements)

Requirements:

• 15 years of experience in network and security engineering/operations in large complex environments (multisite, international, hybrid cloud).
• Degree in computer Science or equivalent, industry certifications desirable
• Strong expertise in routing protocols, especially BGP
• Solid experience with SD WAN solutions with various manufacturer standards, Paloalto, Cisco, Velo Cloud etc.
• Good knowledge of cloud connectivity (interconnection with major cloud providers)
• Strong understanding of LAN/WAN architectures, VLANs, QoS, redundancy, and high availability
• Hands on experience with firewalls (design, policies, troubleshooting)
• Proficiency in VPN technologies: IPSec and SSL
• Knowledge and practice of SASE concepts and solutions
• Good understanding of security best practices in network design and operations