Total 2,477 job vacancies in Singapore

Position Summary :

1. To provide Product technical support to production operations for areas of product engineering competencies and advocate industrial engineering best practices with support from multi-functional team ( MFT ).

2. Responsible for overall product performance and capability, new product introduction, equipment.

3. Responsible for product evolution and liaise closely with PDA on product roadmap.

4. Function as the main interface to Customers and be responsible for all quality issues of the product assigned. Drive actions with internal and external parties to decrease the rate of first-fit rejections.

5. Accountable for product root cause analysis of all quality/process issues by performing 8D analysis (FTQP) and driving the reactivity objective.

Main Tasks & Responsibilities :

1. Product & Engineering Competencies

- Accountable and responsible on managing product definition file and configuration

- Accountable and responsible on product evolution and stay active in IPT team

- To innovate, improve, implement, evaluate and sustain the engineering processes and capabilities

- To advocate engineering best practices supported by multi-functional team (MFT) and production to improve work processes and for optimum operational efficiencies.

- Responsible on Product Cost , focusing on : Design Authority Fee

- Improve internal technical competency, less dependent to DA and reduce Non-Quality cost

- Continuously to improve R1 and FPY improvement which is part of contributor of non-quality cost

2. IPT network communication & Co-operations

-Liaise with Design Authority, IPT for technical related matters to support Product performance and competitiveness.

3. Technical support

-Monitor & Escalate support effectiveness (with job prioritization) to Production Line Manager.

-Ensure adequate support to operation's requests and ensure adequate support given to production lines for Product evolution qualification, capability setup, and relevant technical supports as required.

a. New Product Introduction

• Accountable on Product & Technical work package

b. Customer Return & Investigation

• To lead and coordinate with MFT on the investigation findings and recommended corrective actions.

c. Product production process , sustaining and improvement

• Responsible for the established product manufacturing process by Method Engineering

• Accountable for product issues

• Perform Impact Analysis and work closely with IPT for product issue

d. Projects

• To initiate product continuous improvement plan with the support of MFT

e. To manage validation on supplier alert on product level with support of MFT

4. Continuous Improvement

- Lead/participate in product and process improvement projects (KAIZEN)

5. Internal support Key Performance Indicator

- To establish and maintain KPI ( R1 , FPY ) to measure support performance

- To establish and implement improvement action plan

Requirements:

• Diploma/ Degree in Aerospace/ Aeronautical/ Electronic/ Electrical/ Mechatronics Engineering or equivalent

• Minimum 2 years of relevant working experience in technical support function

• Experience in aviation industry will be added advantage

• Competence in interactive communication, problem solving and decision making are required.

• Excellent analytical and troubleshooting skills

• Proficient in Microsoft Office applications

Job Summary

The Senior Engineer (CSA – Civil/Structural/Architectural) will oversee technical aspects of the construction project, ensuring quality, compliance, and efficient execution. The role involves coordinating with design teams, supervising site works, and supporting project management in decision-making, planning, and problem resolution

Key Responsibilities

• Review and interpret design drawings, specifications, and construction documentation.
• Coordinate with architects, structural and MEP engineers, and consultants to resolve design and technical issues.
• Supervise and monitor site activities to ensure compliance with project specifications, quality standards, and safety requirements.
• Assist in construction sequencing, method statements, and temporary works planning.
• Conduct site inspections, quality audits, and progress monitoring; report findings to management.
• Support cost control by reviewing material usage, workmanship, and variation claims.
• Mentor and guide junior engineers and site staff to ensure smooth project execution.
• Attend project meetings and provide technical inputs for problem-solving and decision-making.

Qualifications & Experience

• Bachelor’s degree in Civil Engineering, Structural Engineering, or Architecture.
• Minimum 5–8 years of experience in construction projects (high-rise, infrastructure, or industrial projects preferred).
• Strong knowledge of construction methods, materials, and codes/regulations.
• Proficient in AutoCAD, MS Office.
• Excellent analytical, organizational, and problem-solving skills.
• Strong communication, leadership, and team collaboration abilities.

Experience:

• 4–8 years in automation, DevOps, cloud infrastructure, or security platform engineering
• Professional experience delivering and supporting production systems
• Built CI/CD pipelines, cloud infrastructure, workflows, or platform integrations (work or strong portfolio)
• Can deliver assigned work with guidance; escalates design decisions
• Strong experience owning production platforms and integrations end to end
• Several years building and running production CI/CD, cloud infrastructure, or workflow automation (not ad hoc scripts only)
• Experience mentoring engineers and leading technical work over multiple quarters

Technical skills:

• Hands-on with at least one major cloud (AWS, Azure, or GCP). Multi-cloud is a plus.
• Terraform, CloudFormation, Pulumi, or similar — standards, review, and ownership
• Kubernetes or cloud-native runtimes (e.g. Cloud Run, managed container services)
• Built or led pipeline design for GitHub Actions, GitLab CI, ArgoCD, Jenkins, or similar
• REST, GraphQL, gRPC, or WebSockets; API design and integration
• Automation platforms, orchestration, or SOAR playbooks
• Prometheus, Grafana, ELK, cloud monitoring, OpenTelemetry, or similar
• SOAR playbooks, orchestration platforms, or enterprise workflow systems
• Familiar with SIEM, SOAR, and SOC workflow systems, or threat intelligence platforms
• Strong Python, Golang, Node.js, or similar for services and automation; scripting (Bash, PowerShell)
• Message queues and pub/sub (Kafka, RabbitMQ, cloud pub/sub, etc.)
• Cloud warehouses, PostgreSQL, Redis, or similar Logging/tracing/metrics, secure coding, release governance

Desirable Skills (Added Advantage):

• Enterprise SIEM, SOAR, SecOps, or threat intelligence platforms.
• Low-code workflow tools (OutSystems, Mendix, Power Apps, ServiceNow, or similar).
• Full-stack development for operator tools and portals.
• BI dashboards or data visualisation.
• Cloud AI/ML and LLM-based workflows.

Education:

Degree in Computer Science, Computer or Electronics Engineering, Information Technology, or a related discipline.

By proceeding with the job application, you are deemed to have read and acknowledged our https://www.totalebizsolutions.com/job-applicant-privacy-policy/ and consented to us using the personal data you shared for the purpose stated in the said policy.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products, solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3 focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027. Further information can be found at www.st.com

YOUR ROLE 

1. Equipment Development:

• Assist in the development and optimization of lithography equipment for semiconductor manufacturing.
• Analyze data to identify equipment improvements and implement solutions.

 2. Equipment Monitoring and Control:

• Monitor and control lithography equipment to ensure consistent and high-quality output.
• Troubleshoot equipment issues and implement corrective actions.

 3. Documentation and Reporting:

• Maintain detailed documentation of process parameters, experiments, and results.
• Prepare technical reports and presentations to communicate findings and recommendations to the engineering team.
• Update equipment documentation and standard operating procedures (SOPs) as needed.

4. Collaboration and Teamwork:

• Work closely with cross-functional teams, including process, production, and quality assurance, to ensure seamless integration of lithography processes.
• Participate in team meetings and contribute to problem-solving discussions.
• Provide support to shift engineers and shift technicians as required.

 5. Continuous Improvement:

• Participate in continuous improvement initiatives to enhance process efficiency, yield, and quality.
• Identify opportunities for equipment automation and implement solutions.

YOUR SKILLS & EXPERIENCES

• Bachelor’s degree in Engineering or a related technical field
• Minimum 2 years of relevant experience in semiconductor equipment engineer, photolithography, or related.
• Hands on experience with EVG Bonder/Debonder / EKRA screen printer equipment.
• Understanding the basics of lithography principle and semiconductor process.  
• Knowledge of data analysis and statical process control.
• Good communication and teamwork skills.
• Work independence and able to do multitask effectively.  

Job Summary
• This role is responsible for crafting comprehensive engineering solutions by applying developed subject matter knowledge. The role involves enhancing concepts and designs through analytical and physical evaluations to boost efficiency and enhance quality. The role develops and executes parameters and test plans, validating engineering specifications, and addressing technical risks, while fostering collaboration with stakeholders. The role leads project teams and delivers well-documented reports, contributing to the realization of operational and strategic objectives.

Responsibilities
• Designs engineering solutions, utilizing multiple engineering disciplines for products, systems, software, and solutions based on established engineering principles and development technology guidelines, while ensuring cost effectiveness and quality.
• Ensures optimization of concepts and designs with analytical and physical assessments, to increase efficiency and improve quality.
• Develops and implements parameters and test plans for new and existing designs; track and verify actions for validation of mechanical, electrical, software, and other engineering specifications and requirements.
• Performs technical risk assessments of engineering solutions developed and ensures appropriate risk mitigation efforts are undertaken.
• Solves difficult and complex problems with a fresh perspective, demonstrating good judgment in selecting creative solutions.
• Develops recommendations on changes and design enhancements to improve reliability, security, processes, and performance.
• Collaborates and communicates with management, internal, and outsourced development partners regarding design status, project progress, and issue resolution.
• Leads a project team of other engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for moderately- complex products.
• Represents the mechanical/thermal team for all phases of larger and more-complex development projects.
• Delivers professionally written reports, and supports the realization of other operational and strategic plans.
• Provides guidance and mentoring to less- experienced staff members to set an example of engineering design innovation and excellence.

Education & Experience Recommended
• Four-year or Graduate Degree in Mechanical Engineering, Electrical Engineering, Computer Science, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 4-7 years of work experience, preferably in engineering design, engineering design tools and software packages, or a related field or an advanced degree with 3-5 years of work experience.

Preferred Certifications
• Product Certification
• Six Sigma Certification

Knowledge & Skills
• Agile Methodology
• Amazon Web Services
• Angular (Web Framework)
• Application Programming Interface (API)
• Automation
• CI/CD
• Computer Science
• DevOps
• Java (Programming Language)
• JavaScript (Programming Language)
• Kubernetes
• Machine Learning
• Microservices
• Python (Programming Language)
• React.js
• Scalability
• Software Development
• Software Development Life Cycle
• Software Engineering
• SQL (Programming Language)

Cross-Org Skills
• Effective Communication
• Results Orientation
• Learning Agility
• Digital Fluency
• Customer Centricity

Impact & Scope
• Impacts multiple teams and may act as a team or project leader providing direction to team activities and facilitates information validation and team decision making process.

Complexity
• Responds to moderately complex issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Key Summary of the Position:

To oversee and support the electrical operations, maintenance, troubleshooting, and compliance activities of the assigned fleet/vessels while ensuring safe, efficient, and uninterrupted functioning of all electrical and automation systems in accordance with company standards, statutory regulations, and operational requirements.

Key Responsibilities:

Technical Operations & Maintenance

• Monitor and support vessel electrical systems including power generation, distribution, automation, navigation, communication, and control systems.
• Coordinate with vessel Chief Engineers and Electrical Officers for timely troubleshooting and rectification of electrical defects.
• Provide technical guidance for preventive and corrective maintenance of electrical equipment onboard vessels.
• Review machinery performance reports and recommend improvements for operational efficiency and reliability.
• Ensure planned maintenance activities related to electrical systems are completed as per schedules.

Dry Docking & Repairs

• Assist in planning and execution of electrical repair works during dry docking, surveys, and major maintenance activities.
• Conduct on the vessel testing to identify electrical circuit, control system, or component failures.
• Perform routine preventive maintenance and necessary component replacements to ensure long-term equipment reliability.

Compliance & Safety

• Ensure vessels comply with statutory, class, flag state, and company electrical safety requirements.
• Support implementation of safety procedures and electrical best practices onboard.
• Participate in incident investigations related to electrical failures or safety concerns and recommend corrective actions.

Procurement & Inventory Support

• Coordinate with procurement teams for sourcing electrical spares, consumables, and service requirements.
• Review requisitions and ensure timely availability of critical electrical spares onboard.
• Assist in vendor evaluation and technical assessment of electrical equipment and services.

Documentation & Reporting

• Maintain proper records of electrical maintenance, breakdown reports, repairs, and technical updates.
• Prepare technical reports, defect analyses, and performance summaries for management review.
• Support audits, inspections, and internal reporting requirements.

Coordination & Communication

• Liaise with vessel staff, classification societies, equipment manufacturers, and external service providers.
• Provide timely support to vessels for operational emergencies and technical issues.

Job Requirements:

• Minimum 5 years of relevant experience in marine electrical operations, vessel management, or related technical roles.
• Relevant sailing experience as Electrical Officer / ETO or shore-based experience in marine electrical operations preferred.
• Strong knowledge and hands-on experience in marine electrical and TFDE propulsion systems, including automation, generators, switchboards, and troubleshooting of MSBD, ESBD, PMS, AMS, ACB, and related systems.
• Prior experience in handling fleet electrical maintenance and vessel support (i.e.: Terasaki, Kawasaki and etc) will be an added advantage.
• Familiarity with class and statutory regulations related to marine electrical systems.

• Must have prior work experience in LNG carriers.

  We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Evaluate technical specifications for newbuilding, repair, and conversion assignments.

• Oversee engineering project coordination with designers, clients, class societies, yard production teams, and vendors to meet compliance and delivery deadlines.

• Work with internal section engineers to prepare drawing lists, schedules, and respond to project-related feedback.

• Organise and attend technical meetings in Batam, Singapore, or other locations as required.

• Manage correspondence and technical information flow between designers, class, clients, vendors, yards, and system integrators.

• Interpret contract terms, technical and equipment specifications, and scope of work/supply to fulfil design obligations.

• Ensure timely execution of design and engineering production plans for awarded projects.

• Monitor designers' drawing progress, track closure of classification review comments, manage vendor specifications, and oversee production drawing schedules.

• Read and interpret design drawings, and retrieve classification rules and maritime regulations for review.

• Collaborate with engineers to draft written responses on technical matters and follow up until resolution.

• Work with the document controller to maintain proper filing of emails, drawings, documents, drawing lists, and vendor specifications.

• Operate independently while contributing effectively as part of a team.

Requirements

• Polytechnic Diploma or Bachelor's Degree in Marine Engineering, Naval Architecture, or a related field.

• Minimum 2–3 years of experience in a project engineering role within the marine or offshore industries.

• Proficiency in Microsoft Word, Excel, PowerPoint, and AutoCAD.

• Ability to track correspondence, draft meeting minutes, and manage engineering information/document flow to ensure compliance and on-schedule delivery.

• Comfortable engaging and conversing with internal and external stakeholders.

• Strong analytical, communication, and interpersonal skills.

• Willingness to travel to Batam or other countries for technical meetings when needed.

Key Responsibilities

• Develop and implement QAQC procedures.
• Conduct site inspections and quality audits.
• Ensure works comply with approved drawings and specifications.
• Prepare inspection reports and quality records.
• Coordinate with consultants, clients, and subcontractors.
• Manage Non-Conformance Reports (NCR) and corrective actions.
• Attend site meetings and quality reviews.
• Monitor testing and commissioning activities.

Experience

• Minimum 2–5 years of QAQC experience in construction projects
• Experience in: Building construction, M&E works, Infrastructure projects, Quality inspections and testing. Managing subcontractors and site quality issues

Requirements:

• Master’s degree in Civil/Structural Engineering.
• Minimum 4 years of relevant experience in structural design and analysis.
• Proficient in structural engineering software like BIM and experience working in a BIM environment.
• Familiar with relevant design codes and standards.
• Good communication, analytical, and problem-solving skills.
• Able to work independently and collaboratively in a team environment.

Responsibilities:

• Prepare structural design calculations and engineering reports.
• Develop and review structural drawings and specifications.
• Coordinate with clients, architects, and other consultants.
• Ensure designs comply with relevant codes, standards, and project requirements.

[Job ID: 1617130]

Job Summary:

Experienced laser engineer to install, configure, and optimize depaneling systems, ensuring precision performance and supporting advanced customer applications.

Responsibilities

• Perform installation and alignment of laser units on depaneling machines
• Configure machines based on internal specifications and customer requirements
• Conduct camera calibration, field calibration, and software debugging
• Perform health checks on incoming laser systems and coordinate defect resolution with vendors
• Maintain accurate records of installed laser components and optical parts
• Support laser processing experiments, including cutting trials and sample measurements
• Troubleshoot laser-related issues on deployed machines
• Deliver customer training, demonstrations, and operational guidance
• Collaborate with design teams and external vendors to develop customized solutions

Requirements

• Minimum 3 years of experience in automation industry with hands-on experience operating machinery
• Strong knowledge of laser systems and machines
• Experience in optics and laser technology is an added advantage
• Possession of a valid laser license
• Ability to perform machine configuration, calibration, and troubleshooting
• Willingness to travel overseas up to 5% when required

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Saito Ryuya

EA Personnel Reg. no.: R23116168

EA License no.: 07C5771

Responsibilities

• Conduct technical assessments for new suppliers and periodic assessments for key existing suppliers
• Drive suppliers regularly on improvement plans and foster an environment that facilitates continual improvement and compliance to company requirements
• Review specifications to validate material defects for return to supplier and ensure timely replacement by supplier
• Apply 8D and other applicable quality tools with suppliers to ensure implementation of effective systemic corrective / preventive actions and no recurrence
• Work with supplier and Engineering / Manufacturing to reach common acceptance of path forward for material issues that are not entirely due to supplier fault
• Maintain a supplier database and their performance evaluation / scoring to facilitate supply chain management
• Provide guidance to Incoming quality inspectors on inspection process and methods

Requirements

• Diploma / Degree in Engineering (Mechanical / Electrical / Mechatronics )
• At least 2 years in the area of Supplier Quality
• Experience / knowledge with mechanical parts or PCBA. Preferably both
• Knowledge of problem solving skills and familiar with quality tools such as 8D, Pareto Analysis, 5 Whys, FMEA, quality control plan, etc.
• Good communication skills
• Eager to learn, independent, takes initiatives, and able to work with minimum supervision
• Able to work with diverse cultures

Ethos Search Associates Pte. Ltd.

EA License No: 13C6655

EA Reg No: R1765450 Pinky Lim (Lim Lee Phing)

- IT support for end users on multiple sites

- Provide Technical support for all end users devices such as laptops, desktops, mobile devices printers, and approved software

- Facilitate and provide technical / event support for the classroom, Lab, meeting room and other areas that have Audio Visual System.

- To oversee the day-to-day teaching facility operations, which include loan of portable devices, accessory and supplying of consumable items such as battery for wireless mic.

Job Requirements: 

- At least a Higher NITEC or Diploma in IT / Audio Visual related disciplines or equivalent;

- At least 1 years of relevant IT support experience

- Must have relevant technical IT expertise and skills.

- Must have good customer service attitude and skills.

- Must be comfortable with Roaming different customer sites islandwide (Main location - Clementi)

Interested candidate please click "APPLY" to begin your job search journey.

We regret to inform that only shortlistedcandidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Tech Services Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOL Tech Services Pte Ltd
UEN No. 202233837K

Position Summary

We are seeking highly motivated and experienced Site Engineers to join our team. The successful candidates will play a key role in overseeing road construction, ground foundation works, and traffic diversion activities on site. This is an excellent opportunity for individuals with local experience in civil engineering, looking to contribute to significant infrastructure projects.

Key Responsibilities

• Supervise and manage day-to-day activities of road construction and ground foundation works.

• Ensure compliance with safety standards and quality control on site.

• Oversee traffic diversion plans and ensure smooth operations in coordination with relevant stakeholders.

• Manage and coordinate with contractors, subcontractors, and suppliers to ensure the timely and cost-effective delivery of the project.

• Monitor progress of construction activities and prepare regular reports for project management.

• Conduct inspections and resolve issues related to site works.

• Liaise with local authorities, consultants, and stakeholders to ensure adherence to regulations and standards.

Requirements

• At least 5 years of relevant local experience in road construction, ground foundation works, and traffic diversion.

• Experience in water pipe works and strong knowledge of laying water pipes.

• At least 5 years of work experience in the related field, preferably in Pipe Jacking of Water, Gas, and Sewer Pipes.

• Bachelor's Degree in Civil Engineering recognized by the Professional Engineers (PE) Board or equivalent qualifications accepted by the Commissioner of Building Control for registration as a Resident Engineer.

• Strong knowledge of construction processes, safety protocols, and quality standards.

• Excellent problem-solving, communication, and interpersonal skills.

• Ability to work independently and collaboratively within a team.

• Good proficiency in Microsoft Office Suite and project management software.
  

SKILLS
Microsoft Office, Construction, Quality Control, Ability to Work Independently, Interpersonal Skills, Architectural Drawing, Project Planning, Structural Engineering, Compliance, Project Management, Construction Drawings, AutoCAD, Civil Engineering, Scheduling.

Job Description

Decarb Engineering & Construction Pte Ltd is a Singapore-based M&E EPC contractor specialising in Fire Protection, ACMV, and ELV systems, holding bizSAFE Star and ISO 9001/14001/45001 certifications. We are seeking a Network Engineer to design, configure, and commission the IP networks underpinning our security and fire alarm system installations across commercial, industrial, and institutional projects.

Roles & Responsibilities

• Design, configure, and commission IP networks for ELV systems — IP CCTV/surveillance, access control, and networked fire alarm systems.
• Set up and manage network switches, VLANs, IP addressing schemes, and PoE infrastructure for security and life-safety devices.
• Configure and integrate addressable fire alarm panels (e.g. EST3/EST4, Notifier, Simplex) into networked architectures.
• Implement system integration via Modbus TCP, BACnet/IP, ONVIF, and related protocols, including BMS integration.
• Conduct on-site testing, commissioning, and fault diagnosis of networked security and fire alarm systems.
• Prepare network architecture drawings, IP schedules, method statements, and as-built documentation.
• Liaise with consultants, main contractors, system vendors, and authorities (SCDF) to ensure compliance and smooth handover.
• Provide post-handover troubleshooting, support, and maintenance for networked ELV systems.
• Ensure all works comply with relevant Singapore codes (SS 645 / CP 10, SS CP 52) and WSH requirements.

Requirements

• Diploma or Degree in Electrical/Electronic Engineering, Computer/Network Engineering, Infocomm, or related discipline.
• 2–5 years' experience in ELV, security, or fire alarm systems, preferably within the M&E or building/construction industry.
• Solid IP networking fundamentals — TCP/IP, subnetting, VLANs, managed switches, PoE.
• Hands-on experience with IP CCTV, access control, and/or networked fire alarm systems.
• Familiarity with integration protocols (Modbus TCP, BACnet/IP, ONVIF) and BMS integration — an advantage.
• Knowledge of Singapore fire alarm and ELV codes (SS 645 / CP 10, SCDF requirements) preferred.
• CCNA/CCNP or equivalent networking certification advantageous.
• Strong fault-diagnosis and troubleshooting skills; able to work across multiple site locations.
• Valid Class 3 driving licence a plus.
• Good communication skills and ability to work within multi-disciplinary project teams.

RESPONSIBILITIES

·       Provide technical and debug assistance included product training.

·       Handle product, technical, warranty, spare parts enquiries and complaints from end-customers, distributors, dealers and e-commerce platform.

·       Study in-warranty claims, compiling of F-Cost report.

·       Monitor quality issues and abnormal defect to make report to factory, take necessary action against warehouse, distributor and factory.

·       Create training materials, technical procedures, service manuals and part guides for distributors.

·       Handle defective unit exchange to end customer, follow up defective unit repair, checking and grading at contractor before return to warehouse.

·       Handle COC renewal, COC and WELS testing and registration for new product.

·       Assist distributor to conduct field test for new products.

·       Support establishment of service management and service centre for local and export market.

REQUIREMENTS

·       Minimum Diploma in Engineering or related discipline

·       Minimum 2 years of experience of experience in consumer electronics after sales management industry.

·       Strong product technical knowledge in home appliances and audio visual.

·       Proficient in MS Office applications.

·       Ability to work under pressure.

Please submit resumes to jason.chow@oaktree.com.sg with the following details in MSWord format:

·      Position applying for

·      Current remuneration

·      Expected remuneration

·      Notice period

Jason Chow Yew Fai

EA License No :       06C4642

EA Reg No :           R25158800

We regret that only shortlisted candidates will be notified.

Join a Leading Engineering & Infrastructure Organisation

We are looking for passionate and driven Engineering graduates and professionals to join a reputable organization supporting critical infrastructure and engineering operations in Singapore.

Why Join Us?

• Gross Salary : Up to $5,000+++ per month

• Monthly AWS allowance

• Generous performance bonus of up to 3 months

• Starting 18 Days Annual Leave

• Family and Childcare Leave entitlement

• Structured training and career progression opportunities

• Stable career with long-term growth prospects

Key Responsibilities

• Support engineering operations, maintenance, and improvement initiatives.

• Conduct troubleshooting, investigations, and root cause analysis of engineering issues.

• Analyse system performance data and recommend reliability improvements.

• Assist in engineering projects, testing, commissioning, and asset enhancement activities.

• Prepare technical reports, documentation, and work instructions.

• Collaborate with cross-functional teams to improve operational performance and safety standards.

• Ensure compliance with engineering, quality, and safety requirements.
  

Requirements

• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Electronics Engineering, Mechatronics Engineering, or other relevant Engineering disciplines.

• Candidates with relevant engineering, maintenance, project, reliability, manufacturing, transportation, infrastructure, utilities, aerospace, marine, or industrial experience are encouraged to apply.

• Strong analytical and problem-solving skills.

• Good communication and interpersonal abilities.

• Ability to work independently and as part of a team.
  

Apply Now

If you are looking to kickstart or advance your engineering career with an established organization offering attractive compensation, strong career development, and excellent benefits, we would love to hear from you.

Submit your updated resume today for consideration.

Please send in your resume to :

edward.liau@cornerstoneglobalpartners.com or whatapp me at +65 96578518

Edward Liau Xianke R1217423

Cornerstone Global Partners

License Number: 19C9859

You will be part of a team responsible for regulating development and building works in the public streets as well as road structure safety zone to safeguard the road structure safety zone and public streets.

You will be involved in reviewing the design of both temporary and permanent works affecting the road structures and public streets, engineering risk assessment and engineering analysis, method of construction and instrumentation proposal, as well as review of geotechnical and structural instrumentation data, ensuring the construction is with accordance to LTA’s standards. In addition, you would also be involved with projects assets or Infrastructure are integrated with adjoining and adjacent developments, processing and coordinating the successful project handing over to the Authority.

Besides the opportunity to work with developers, their architectural and engineering consultants and contractors, you will also coordinate and liaise with LTA architects, planners , engineers, Asset owners on projects affecting road and road related facilities and systems.

You will also be expected to facilitate and coordinate other kinds of asset taking over procedures from developers, private owners, to the Authority.

• Knowledge in Civil / Structural Engineering

• Resourceful, analytical, able to thrive in a fast pace and demanding work environment

• Self-motivated, able to multi-task and keen to learn

• Possess initiative and keen interest to develop professional skillset

• Able to work independently and a team player with good leadership, interpersonal and communication skills

• Proactive and resourceful

• Familiarity with AutoCAD and proficient in MS Office and document control systems is an advantage

• Those with relevant experience in civil engineering design and strong understanding of construction drawings and as-built documentation works will have an advantage

As part of the shortlisting process for the role, you may be required to complete a medical declaration and / or undergo further assessment.

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Key Responsibilities:

• Collaborate with cross-functional teams to define specifications for mechanical systems and sub-systems.
• Lead the design and selection of mechanical components, perform tolerance analysis, and develop motion systems.
• Oversee component evaluation, system-level integration, and transition to manufacturing and field deployment.
• Manage internal or external design partners in joint development initiatives.

Requirements:

• Proven experience in mechanical design, particularly involving automated machines.
• Strong background in thermal simulation and analysis, including finite element modeling (FEA)
• Preferably from advanced equipment sectors such as semiconductors, though candidates from other high-precision industries are welcome.
• Skilled in 3D CAD software (e.g., SolidWorks or similar platforms)
• Minimum of 3 years of hands-on experience in relevant mechanical engineering roles
• Solid understanding of mechanical fundamentals, including tolerance analysis and motion control systems

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Micron Technology Inc. is a Fortune 500 company & employs about 45,000 workers worldwide, with HQ in Boise, ID. Micron offers the industry’s broadest portfolio of memory solutions—starting with foundational DRAM, NAND, and NOR Flash memory, extending to SSDs, MCPs, HMCs, and other memory-based systems. Micron is expanding and now starting full-fledged NAND research and development in Singapore co-locating with high volume manufacturing to speed up innovation. Micron has several world class SSD products (NAND) which have revolutionized speed feeding into GPU’s for superior AI performance and achieving blazing fast performance for gaming and pro workloads. Micron is one of the most prolific patent applicants in the world with 60,000 patents granted and still growing.

As a Staff/Principal Engineer, you will be a part of groundbreaking next generation NAND research & development dry etch team driving critical modules listed below. The position promises ample opportunities for innovation, collaboration and testing a new dimension and scaling with next generation NAND. You will work directly with process integration and other process areas such as Wet etch, CVD, Diffusion, Metals, Lithography & Dry Etch. You will be involved with innovative and outstanding dry etch chambers & own the process roadmap to meet program and yield goals. Your responsibilities include, but not limited to:

Main Responsibilities:

• As a CMP Process Development Engineer, you will develop and optimize chemical mechanical planarization procedures. These procedures aim to improve product quality and reliability for the next generation of Micron's memory parts.

• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts

• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications

• Initiate and manage experiments to widen process margins as well as to evaluate manufacturability of next node solutions

• Extensively collaborate with vendors to develop processes that meet integration requirements for current and next-generation 3-D NAND nodes

• Incorporate best known manufacturing methods into early development phase of upcoming nodes

• Design and implement advanced process monitoring and control methodologies

• Provide strategic roadmap for N+, N++ and future NAND Nodes

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures, and equipment

• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers

• This position requires communication and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property Protection policy is necessary

Other Responsibilities:

• Mentor new hires and less experienced team members on CMP fundamentals, process development, and Micron systems

• Engage with Procurement & Operations Central Teams and other partners both locally and globally pushing for breakthrough solutions

• As a technical expert, lead or drive team or sites on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost, and productivity improvement meetings

Artificial Intelligence

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Education/Job requirements:

• Masters /PhD with 5-10 years or Bachelors degree with 7-12 years of relevant working experience in the semiconductor industry with a background in Chemical Mechanical Planarization (CMP) Process in 300mm wafer fabrication

Must Have Technical Skills

• Hands-on experience CMP equipment operation such as AMAT (LKP), EBARA-300X and next generation CMP equipment, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads

• Experience in dielectrics/metals CMP process development on 3D NAND or other memory technology

• Understanding of various integration and structural impacts and constraints related to film deposition and other upstream/downstream processes

Must Have Soft Skills

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Strong collaboration and communication skills (verbal and written).

• Self-driven, adaptable, and able to manage multiple projects.            

• Proven ability to take calculated risks and execute novel solutions.

• Recognized as a mentor, team player and technical expert with the ability to solicit feedback, accept input, and analyze success/failure.

Highly Desirable/Preferred skills or experience

• An understanding of the general process steps and process flow for memory processing planar and vertical NAND memory.

• Strong interest in Data science, modelling, and drive to use/adopt AI to optimize workflows.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We’re searching for an Associate Equipment Engineer to be part of our Thin Film CVD department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• To assist CVD equipment engineers to sustain equipment performance and perform schedule & ad hoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assisting new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More About You:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment preferred
• Fresh Diploma graduates with keen interests are welcome to apply, training will be provided
• Non-diploma holders with 3 years’ direct experience in CVD equipment can apply
• Basic engineering knowledge
• Some knowledge of Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

·      Provide on-site technical support to front-end semiconductor OEM and fabrication customers for fluid system, gas delivery, and process application challenges.

·      Diagnose and resolve complex tool, system, process, and fluid delivery issues impacting customer uptime, yield, reliability, and operational performance.

·      Conduct root cause investigations and recommend corrective and preventive actions to resolve customer concerns.

·      Support tool installation, startup, qualification, and troubleshooting activities within customer facilities.

·      Evaluate customer fluid systems and identify opportunities to improve performance, reliability, safety, and operational efficiency.

·      Provide technical expertise and best-practice recommendations for high-purity fluid systems and gas delivery systems.

·      Lead technical discussions with customer engineering teams and establish credibility through deep application and process knowledge.

·      Develop and maintain strong technical relationships with key stakeholders within front-end semiconductor OEM and fabrication customers.

·      Work closely with Sales to identify, develop, and promote application solutions, products, and engineering services opportunities.

·      Conduct customer site assessments and technical evaluations to identify opportunities for process improvements and solutions deployment.

·      Design and develop application solutions proposals in collaboration with Sales, Engineering Services, and Commercial Proposal teams.

·      Support technical clarification meetings, solutions presentations, and customer workshops as required.

·      Collaborate with global Engineering Services teams, Product Engineering, Product Management, and Strategic Account teams to resolve customer challenges and support business growth initiatives.

·      Provide customer insights, application feedback, and market intelligence to support product development and strategic account planning.

·      Support internal associates' technical knowledge development through product, application, and semiconductor process training.

·      Support the development and execution of commercialization plans and strategic initiatives to grow semiconductor products, application solutions, and engineering services business.

·      Leverage internal technical resources and subject matter experts to deliver differentiated customer solutions and experiences.

·      Extend technical support to strategic regional customers and distributor partners as required

·      Other duties and assignments as assigned from time to time.

Requirements

·      Bachelor's degree in Mechanical Engineering, Chemical Engineering, Electrical Engineering, Materials Engineering, Instrumentation Engineering, or a related engineering discipline.

·      Minimum 5 years of relevant experience in front-end semiconductor OEMs, semiconductor fabrication facilities, application engineering, process engineering, tool engineering, field engineering, or technical customer support roles.

·      Hands-on experience supporting semiconductor manufacturing equipment, including installation, startup, qualification, troubleshooting, and performance optimization activities.

·      Strong understanding of semiconductor manufacturing processes such as Deposition, Etching, Photolithography, Implantation, and/or related wafer fabrication technologies.

·      Experience with high-purity fluid systems, gas delivery systems, and associated semiconductor process applications.

·      Knowledge of semiconductor tool architecture, subsystem interactions, and fab/sub-fab operations.

·      Familiarity with common failure modes including leaks, particle generation, flow performance issues, contamination risks, and system response challenges.

To find out more about this opportunity, please contact Lionel Liew at lionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No:R1330693

ST Engineering is a global technology, defence andengineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers inmore than 100 countries. The Group uses technology and innovation to solvereal-world problems and improve lives through its diverse portfolio ofbusinesses across the aerospace, smart city, defence and public securitysegments. Headquartered in Singapore, ST Engineering ranks amongthe largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industryleader in cybersecurity with over two decades of experience, we deliver aholistic suite of trusted cybersecurity solutions to empower cyber resiliencefor government and ministries, critical infrastructure, and commercialenterprises. Backed by our indigenous capabilities and deep domain expertise,we offer robust cyber-secure products and services in cryptography,cybersecurity engineering, digital authentication, SCADA protection, audit andcompliance. We specialise in the design and build of security operationscentres for cybersecurity professionals and provide managed security servicesto strengthen the cybersecurity posture of our government and enterprisecustomers.

Job Overview:

As a Senior SoftwareEngineer, you will lead the architecture, design, and development of highlysecure enterprise-grade applications and Outlook plugins with advancedcryptographic functionalities. You will serve as a technical authority, guidingengineering teams and influencing strategic decisions to ensure robust,scalable, and secure solutions. This role requires deep technical expertise,leadership skills, and the ability to drive innovation across complex systems.

Key Responsibilities:

• Define and own the software architecture for mission-critical applications and plugins, ensuring security, scalability, and maintainability.
• Lead the design and implementation of advanced cryptographic solutions (AES, RSA, ECC, PKCS#11) and enforce compliance with industry standards.
• Mentor and coach engineering teams, fostering best practices in secure coding, performance optimization, and software quality.
• Collaborate with product managers, security experts, and stakeholders to translate business requirements into technical strategies.
• Conduct architecture reviews, code audits, and risk assessments to maintain high security and reliability standards.
• Drive innovation by evaluating emerging technologies and integrating them into the product roadmap.
• Oversee source control strategies, CI/CD pipelines, and ensure robust versioning and backup processes.
• Represent the engineering team in customer and executive-level discussions, providing technical insights and recommendations.
• Prepare and maintain comprehensive technical documentation for architecture and design decisions.

Required Qualifications:

• Minimum 10 years of professional experience in C++ and C# development, with at least 5 years in a technical leadership or architecture role.
• Proven track record in designing and delivering secure Windows-based applications and Outlook plugins.
• Expertise in cryptographic algorithms, protocols, and secure software design principles.
• Strong proficiency with development tools (Visual Studio, Git), CI/CD systems, and debugging techniques.
• Exceptional problem-solving skills and ability to make high-impact technical decisions.
• Excellent communication and leadership skills, capable of influencing cross-functional teams and stakeholders.

Preferred Qualifications:

• Experience with enterprise security frameworks and compliance standards (e.g., FIPS, GDPR).
• Familiarity with Agile/Scrum methodologies and DevSecOps practices.
• Contributions to open-source projects or published technical papers in security or software architecture.

Work location: Jurong East

Find out more:  https://www.stengg.com/cybersecurity

STEngineering believes in fostering a culture where team members are encouragedto overcome challenges, explore new ideas, and work together to succeed. Wevalue individuals who are determined to push beyond the boundaries, and have athirst for knowledge, continuous learning, and self-improvement.

• Well Established Company
• Salary $2550 - $3650 (Basic) + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas Crescent (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.30am to 5.15pm

Job Responsibilities:

• Prepare and produce AutoCAD electrical drawings.
• Prepare production drawings, including detailed BOM list.
• Generate as-built drawings based on panel testing, FAT and SAT, as required.
• Attend meetings with Sales/Project teams to resolve drawing-related issues and liaise with consultants/customers on design matters and drawing preparation.
• Able to travel to Malaysia. Able to perform overtime as and when required.
• Carry out urgent tasks and drawing assignments as directed by the superior.
• Provide support to Project Engineers when additional manpower is required.
• Attend panel Factory Acceptance Tests in Singapore or Malaysia, as required.

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Minimum 1 year of relevant experience
• Proficiency in AutoCAD will be an added advantage

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will becontacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492