Total 2,122 job vacancies in Singapore

Key Responsibilities

• Review and assess AC and DC marine power system designs, philosophies and integration arrangements
• Conduct detailed review of analytical studies including:
  - Load flow and dynamic response
  - Short-circuit and selectivity
  - Protection coordination and relay settings
  - Harmonics, transient stability & power quality
  - Arc flash and fault containment
• Evaluate system layouts including MV/LV switchboards, distribution systems, propulsion networks and emergency supplies
• Analyse and verify hybrid/alternative configurations (e.g., ESS/battery, DC grid, power converters and drives)
• Prepare technical assessments, gap analysis and recommendations based on study outcomes
• Review vendor submissions, SLDs, schematics, and electrical calculation reports
• Implement class and regulatory compliance (DNV, ABS, LR, IMO, IEC)
• Support FAT/SAT and commissioning from a systems perspective
• Present findings and risk-based recommendations to project teams and clients

Job Requirements

• Degree in Electrical or equivalent
• 4+ years’ experience in marine, offshore, industrial, or power systems engineering
• Demonstrated experience in AC and DC network analysis

Desired Skills

• Ability to interpret vendor data and detect design inconsistencies
• Strong analytical writing and communication skills

What We Offer

• A technically focused role with access to cutting-edge projects (newbuilds + retrofit)
• Supportive engineering culture and professional development pathways
• Competitive salary and benefits package

As a Data Center AutoCAD Design Engineer, you will be responsible for designing, implementing, and maintaining our data center infrastructure to ensure optimal performance, reliability, and security. You will work closely with our engineering teams to help out our growing infrastructure needs and show your work through your command of your AutoCAD design experience.

Responsibilities:

● Design and create layouts of data center infrastructure including facilities structure, cabinets, overhead ladders and raceways, structured cabling, aisles (hot & cold), cabinets, mechanical, electrical, servers, storage, and networking equipment.

● Perform capacity planning and resource allocation to ensure the scalability and efficiency of our data center environment.

● Monitor and optimize the performance of data center infrastructure components to meet service level agreements (SLAs) and business requirements.

● Troubleshoot and resolve infrastructure-related issues, collaborating with cross- functional teams as needed.

● Implement and maintain security measures to protect data center assets and ensure compliance with industry standards and regulations.

● Plan and execute infrastructure upgrades and migrations with minimal impact on ongoing operations.

● Document configurations, processes, and procedures to ensure knowledge sharing and operational continuity.

● Stay abreast of the latest developments in data center technologies and best practices, recommending and implementing improvements as necessary.

● Utilize AutoCAD design experience to create detailed technical drawings and models for data center layouts and infrastructure components.

Requirements:

● Strong knowledge of data center architecture along with the minimum design requirements for a network, compute, and storage racks as well as layers 2/3 and virtualization platforms

● Proven experience in a colocation, inside plant, or telecommunications facilities engineer or similar role in a large-scale data center or telecom environment.

● Solid understanding of physical design standards and IT security best practices in data centers and colocation facilities.

● Strong understanding of public cloud infrastructure as well as cloud-native applications, preferably with demonstrable experience in helping scale the overall global footprint of a geographically diverse production network

● Excellent troubleshooting skills with the ability to analyze complex issues and implement effective solutions.

● Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams.

● Relevant certifications (e.g., CCNA, MCSE, VCP, Autodesk Certified Professional) would be a plus.

● Proficiency in AutoCAD or similar software for designing data center layouts and infrastructure components.

Job Description:

• Develop, maintain, and update project schedules, including baseline programme & Micro schedule establishment, progress tracking, and schedule control throughout the project lifecycle.

• Integrate and consolidate information from multiple stakeholders to ensure accurate and effective project planning and reporting.

• Analyze project data, identify schedule risks, critical path activities, and potential delays, and propose mitigation measures to support project objectives.

• Calculate and estimate the duration, manpower, equipment, and resource requirements for major construction activities.

• Prepare and maintain weekly and monthly progress reports and management presentations. Experience in using Power BI to develop project dashboards and visualize project data will be an added advantage.

• Utilize Microsoft office advanced skill to analyze project performance, monitor KPIs, and generate management reports.

• Prepare technical submissions and planning documents for tender submissions, including project schedules, methodologies, manpower histograms, and resource planning.

• Conduct site planning, monitor work progress, and coordinate with project teams to ensure works are executed according to the approved schedule.

• Prepare Extension of Time (EOT) claims, delay analysis, and supporting documentation.
  

Requirements:

• At least Diploma in civil engineering or related discipline.

• Minimum 7 years related experiences in the construction/LNG/Oil & Gas projects.

• Proficiency in Primavera P6.
  

Salary

• $6,000- $9,000

We are representing a subcontractor to hire for a Senior Project Engineer (Electrical) with experience in Data Center projects.

Key Responsibilities

• Manage and oversee electrical engineering works for data centre construction projects
• Coordinate closely with main contractors, consultants, subcontractors, and internal teams
• Review electrical drawings, specifications, and technical submissions
• Supervise installation, testing, and commissioning of electrical systems (e.g., LV/MV distribution, UPS, generators)
• Ensure compliance with safety standards, regulatory requirements, and project specifications
• Track project progress, resolve site issues, and support schedule and cost control
• Provide technical support and guidance to junior engineers and site teams

Requirements

• Degree in Electrical Engineering or relevant discipline
• Minimum 2-6 years of experience in data centre / mission-critical projects, with a strong electrical focus
• Experience working for subcontractors or on-site project execution roles preferred
• Solid understanding of electrical systems installation and coordination within construction environments
• Strong communication and stakeholder management skill

Interested candidates, please apply here.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a Backend Systems Engineer - IOT/Smart City. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

ROLES AND RESPONSIBILITIES
Join the Software Engineering team on a physical Operations Technology (OT) integration project. You will build and maintain the backend systems that connect OT field devices to the digital twin platform — handling real-time data ingestion, protocol translation, and system integration across industrial communication standards.

Key Responsibilities

• Develop and maintain backend services and middleware for OT/IoT data ingestion using OPC-UA, MODBUS, and MQTT protocols.
• Build data pipeline components that normalise, process, and route telemetry from field devices to platform services and 3D visualisation layers.
• Integrate AI coding tools (e.g. Claude, Copilot) into daily development workflows for code generation, unit testing, and validation — this is an expected practice, not optional.
• Write and maintain automated test suites covering protocol adapters, data transformation logic, and integration endpoints.
• Collaborate with frontend Unity engineers and systems architects to define and implement API contracts (REST/WebSocket).
• Participate in code reviews, contribute to technical documentation, and support deployment through CI/CD pipelines.
• Troubleshoot field connectivity and protocol issues; work with OT/hardware teams on device commissioning and debugging.

Must-Have Requirements

• Hands-on experience with OPC-UA, MODBUS, and MQTT — protocol implementation, not just conceptual familiarity.
• Proficiency in backend development (Python, Node.js, Go, or Java — at least one).
• Active use of AI tools for coding, testing, and validation in prior roles or personal projects.
• Experience writing integration and unit tests; familiarity with test automation frameworks.
• Comfortable working with message brokers (MQTT brokers, Kafka, or similar) and time-series or event-driven data.

Good to Have

• Exposure to digital twin platforms or industrial IoT stacks.
• Familiarity with OT security considerations (network segmentation, secure protocol configuration).
• Experience with containerisation (Docker/Kubernetes) and CI/CD tooling.
• Knowledge of BACnet, DNP3, or other industrial protocols.

Experience

2–5 years in backend or systems software engineering, with at least some exposure to OT/IoT environments. Degree in Computer Science, Engineering, or equivalent practical experience.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to keerthana@aven-sys.com. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Keerthana Ramakrishnan

Avensys Consulting Pte Ltd

EA License 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Job Summary 

As an augmented resource in the Enterprise Knowledge Department, you play an important role in transforming how the Authority works with structured and unstructured data. You will be part of a dynamic team responsible for developing, enhancing and maintaining IT systems/applications that support data management needs. 

Key Responsibilities 

• Analyse the Authority’s data needs and document the requirements. 

• Refine data collection/consumption by migrating data collection to more efficient channels. 

• Plan, design and implement data engineering jobs and reporting solutions to meet the analytical needs.  

• Develop test plan and scripts for system testing, support user acceptance testing. 

• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution. 

• Ensure the smooth operations and service level of IT solutions. 

• Support production issues. 

What we are looking for 

• Good understanding and completion of projects using waterfall/Agile methodology. 

• Hands-on experience in DevOps deployment and data virtualisation tools like Denodo will be preferred.   

• Understanding of reporting or visualization tool like SAP BO and Tableau is important. 

• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.  

• Hands-on experience in big data engineering jobs using Python, Pyspark, Linux, and ETL tools like Informatica. 

• Strong SQL and data modelling and data analysis skills.  

• Good understanding of analytics and data warehouse implementations. 

• Ability to troubleshoot complex issues ranging from system resource to application stack traces. 

• Track record in implementing systems with high availability, high performance, high security hosted at various data centres or hybrid cloud environments will be an added advantage. 

• Up to $4,000 + HP Allowance + AWS + Bonus (subject to company P/L) (salary will commensurate according to experience & qualifications)

• Working days: Monday to Friday & Alternative Saturday (8am to 6pm)

• Working location: Bugis

• Established façade specialist with 40+ years of industry experience

• Opportunity to work on landmark construction projects

• Specialized expertise in façade and architectural solutions

• Stable and reputable Singapore construction company
  

Responsibilities:

• Managing parts of construction projects

• Study construction drawings details and coordinate with consultants and sub-contractors to resolve any site issues

• Checking technical designs and drawings to ensure that hey are followed correctly.

• Inform Project Director or Project manager on any site problems arising

• Supervising the progress to the necessary parties

• Coordinate of sub-contractor's work and ensuring the work on the site is on schedule.

• Providing technical advice and solving problems on site
  

Requirements:

• Degree or Diploma in Civil Structural Engineering or Building Related

• At least 2 years working experience in construction industry

• Able to work independently under tight timeline & pressure

• Computer literate (MS Office and AutoCAD)

About the Role

Join our team as a Project Engineer supporting the delivery of integrated security system projects. You will work closely with the Project Manager to plan, execute, and monitor installations, including CCTV, access control, and intrusion detection systems. This role involves hands-on technical coordination, site support, documentation, and collaboration with suppliers and subcontractors to ensure projects are completed on time, within scope, and to the highest quality and safety standards. Ideal for a technically skilled professional who thrives in a dynamic, project-driven environment.

Job Responsibilities

• Assist the Project Manager in the planning, execution, and monitoring of security system projects.
• Support the preparation of project documentation, including drawings, specifications, and progress reports.
• Conduct site surveys and gather necessary technical data.
• Assist in the configuration, testing, and commissioning of security systems, including CCTV, access control, and intrusion detection systems.
• Provide technical support to installation teams and address on-site issues.
• Coordinate with suppliers and subcontractors. Ensure projects adhere to safety regulations and quality standards.
• Maintain accurate project records and documentation. Assist in troubleshooting.

Job Requirements

• Minimum NITEC in Electrical/Electronic Engineering.
• Minimum 3 years of experience in security systems or related areas.
• Proficient in Microsoft Office Suite (Excel, Word, Outlook), Microsoft Project, MS Team and AutoCAD.
• Knowledge of ELV / security systems (CCTV, EACS, IDS, PA and Fire Alarm) and M&E works.
• Strong technical and problem-solving skills.
• Good communication and interpersonal skills. Ability to work independently and as part of a team.

We are hiring Module Engineers (Process / Equipment) to support advanced semiconductor wafer fabrication in a high-volume manufacturing environment. This role focuses on Diffusion, Ion Implantation, Etch, or Thin Film deposition processes, ensuring stable tool performance, high yield, and continuous process improvement.

This is an excellent opportunity for engineers with semiconductor manufacturing, wafer fabrication, process engineering, or equipment engineering experience to grow in a leading global semiconductor company.

Key Responsibilities

• Support daily semiconductor wafer fabrication operations within assigned module (Diffusion / Implant / Etch / Thin Film)

• Perform process monitoring, equipment troubleshooting, and root cause analysis (RCA)

• Drive yield improvement, defect reduction, and process optimization initiatives

• Execute statistical process control (SPC), data analysis, and process capability monitoring

• Support equipment qualification, preventive maintenance (PM), and tool recovery

• Collaborate with Process Integration, Manufacturing, and Equipment Engineering teams

• Participate in continuous improvement (CI), lean manufacturing, and cost reduction projects

• Ensure compliance with safety, cleanroom protocol, and semiconductor quality standards

Requirements:

• Degree / Diploma in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Materials Science, Physics, or related discipline

• Experience in semiconductor manufacturing / wafer fabrication environment preferred

• Exposure to Diffusion, Ion Implant, Etch, or Thin Film processes is highly advantageous

• Knowledge of SPC, DOE, 8D, RCA, or yield management tools

• Strong analytical, troubleshooting, and problem-solving skills

• Familiar with cleanroom operations and high-volume manufacturing (HVM) environment

• Good team player with strong communication skills

• Willing to work in shift rotation (if required)

How to apply: Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Engineer", thank you.

• Well Established Company
• Salary $2550 - $3650 (Basic) + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas Crescent (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.30am to 5.15pm

Job Responsibilities:

• Prepare and produce AutoCAD electrical drawings.
• Prepare production drawings, including detailed BOM list.
• Generate as-built drawings based on panel testing, FAT and SAT, as required.
• Attend meetings with Sales/Project teams to resolve drawing-related issues and liaise with consultants/customers on design matters and drawing preparation.
• Able to travel to Malaysia. Able to perform overtime as and when required.
• Carry out urgent tasks and drawing assignments as directed by the superior.
• Provide support to Project Engineers when additional manpower is required.
• Attend panel Factory Acceptance Tests in Singapore or Malaysia, as required.

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Minimum 1 year of relevant experience
• Proficiency in AutoCAD will be an added advantage

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will becontacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Required Skills & Qualifications

• Strong hands-on experience with:
• IBM Watsonx (Watsonx.ai, Watsonx.data, Watsonx Orchestrate)
• QRadar SIEM
• IBM Resilient SOAR
• Experience in:
• AI/ML integration or LLM-based applications
• Prompt engineering and automation workflows
• Proficiency in:
• Python / APIs / automation frameworks
• Strong understanding of:

• SOC operations (incident response, threat analysis)

  • Fully functional and optimized AI-driven automation agents
  • Integration with QRadar and Resilient platforms
  • Documentation of workflows and configurations
  • Production deployment support and knowledge transfer

We are looking for an experienced IT Support Engineer to join our technology team. You will be responsible for providing L2/L3 application support, ensuring stability, availability, and performance of business-critical systems and applications.

• Working Hours: Mon-Fri
• Working Location: Central
• Salary Package: Up to $8,000(basic) + AWS
• Job Type: Contract

Key Responsibilities

• Provide L2/L3 application support for production and non-production environments.
• Monitor application and infrastructure performance to ensure system availability, reliability, and optimal performance.
• Investigate, troubleshoot, and resolve application, infrastructure, and security incidents within agreed service levels.
• Perform root cause analysis and implement preventive measures to minimise recurring issues.
• Manage incident ,problem, and change management activities following ITSM best practices.
• Support system deployments, releases, and operational readiness activities.
• Develop and maintain operational procedures, technical documentation, and support runbooks.
• Analyse operational metrics and prepare regular reports on system health, service performance, and improvement initiatives.
• Drive automation initiatives to improve operational efficiency and reduce manual effort.
•  Participate in on-call support or after-hours maintenance activities when required.

Requirements

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related discipline.
• Strong troubleshooting and problem-solving skills across applications and infrastructure.
• Experience with ITSM processes including Incident, Problem, and Change Management.
• Hands-on experience with monitoring and observability tools
• Familiarity with cloud platforms such as AWS, Microsoft Azure, or Google Cloud.
• ITIL Foundation or related certifications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data as it is not required at this application stage.

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elane Yap Theng Yu- R1989397

ScienTec Consulting Pte Ltd -11C5781

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Role Overview

We are looking for an experienced Electrical Field Engineer to support an HVDC / Grid Solutions project. The engineer will be site-based and act as the key technical interface between construction, commissioning, engineering teams, contractors, and clients.

The role focuses on supporting installation, troubleshooting, and commissioning activities related to S2 work packages, ensuring technical issues are resolved effectively and properly documented.

Key Focus

• Special focus for S2 work package

• Focus on all issues related to the installation/Erection of the equipment activities and interfaces/coordination within packages/systems, and with related activities in the scope of Partner & Contractor.

• Ensure a daily monitoring in direct contact with the site teams and the partner(s) & Contractors in his field of activity.

• Provide close support and follow up to the engineering department by proposing documented solutions, and could as well update or prepare, as appropriate, SMFs under the supervision of the assigned engineering office.

Other actions

• Support to the Site Manager during technical meetings involving the client, partners, and subcontractors.

• Collaboration with the Quality and Document Control teams

• Ensures strict adherence to the change management process and the proper maintenance of "As-Built" (marked-up) documentation.

• Participates in technical and coordination meetings related to his engineering activity(ies), as well as those concerning general site operations and mandatory training sessions.

• Ensures that the GFC/SQ/SMF/Red Lines processes are used correctly

• Participates when required to GFC/SQ/SMF/RMU meetings with Site/engineering teams

• Supports all EHS (Environment, Health, and Safety) initiatives and ensures that all solutions to be implemented comply with applicable safety regulations

Requirements

• Degree in Electrical Engineering or related discipline.

• Experience in HVDC, substations, power transmission, or large-scale electrical projects.

• Similar experience on OCP or OCS station or large AC projects

• Experience in site-based engineering, commissioning, or construction support preferred.

• Knowledge of LV secondary systems, protection & control, cabling, and electrical installation preferred.

• Strong understanding of electrical drawings, schematics, cable systems, and equipment interfaces.

• Strong troubleshooting, communication, and coordination skills.

• Understanding of technical documentation related to the activity (SLD, Layouts and Erection drawing, Principles, Mechanical specifications, Equipment data sheets, BoM, OMM etc)

Project Details

• Start Date: ASAP

• Working Hours: 6 days/week, 54 hours/week

• Overtime: Paid when working beyond 54 hours/week

• Site Allocation: Singapore with occasional travel to Batam worksite

• Contract length: 1 year (Extendable)

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Position Overview:

We are seeking a skilled Microsoft Dynamics 365 SoftwareEngineer to design, develop, and maintain customised solutions within theDynamics 365 CRM ecosystem. The successful candidate will work closely withbusiness and Infocomm Technology stakeholders to translate requirements intotechnical solutions whilst ensuring system performance, security, andscalability.

Responsibilities

• Drive and contribute to the implementation of Microsoft Dynamics 365 solution for CRM module, including gathering requirements, designing and development, module configurations or extensions to the standard Microsoft Dynamics applications and ensure all functionalities work effectively with all other integrated/interfaced applications.
• Responsible for development, deployment, testing and technical documentation for operations and support of the MD365, and related application integrations.

• Customization and Configuration:
• Utilize your expertise in SQL and .NET to customize MD365 forms, entities, fields, forms, view, workflows, and queries to meet business requirements.
• Implement plugins, custom workflows, and integration solutions to extend MD365 functionalities.
• Customize workflows to align with business processes.

• Integration:
• Develop integration solutions to connect MD365 with other business applications, leveraging SQL databases and .NET frameworks using APIs, web services, and middleware solutions to ensure seamless data flow across platforms.

• Technical Support and Maintenance:
• Provide technical support to post-implementation, troubleshoot issues, and perform system upgrades and patches.
• Ensure the stability, performance, and security of MD365 systems.

• Documentation:

·       Createcomprehensive documentation including system architecture, configurations, andcustomizations for reference.

·       SystemPerformance Improvements:

·       Conductproduct evaluations of upgrades to the MD365 system.

• DevOps practices including CI/CD pipeline implementation, automated testing, and deployment using modern development tools
• Manage performance tuning and capacity planning activities to enhance the performance of the MD365 platform.
• Analyze user support statistics and related data to recommend appropriate measures.

The ideal candidate should:

• Possess a Bachelor's degree in Computer Science, Information Technology, or related field.
• Minimum of 3-5 years of technical working experience in cloud or web applications development
• Strong proficiency in MS SQL for data manipulation, querying, and reporting.
• Experience with .NET framework and development languages such as C# for customization and integration tasks.
• Strong DevOps background with hands-on experience in GitLab, Confluence, JIRA, X-Ray, security scanning tools, and automated testing frameworks  
• Has completed at least 2 end-to-end full life cycle implementations of Microsoft Dynamics 365
• Possess Microsoft Dynamics 365 Certifications (MB-500, MB-820) and in-depth understanding of MD365 concepts, modules, and functionalities.
• Familiarity with SHIP-HATS and AWS cloud services is advantageous
• Ability to work with functional teams
• Excellent verbal/written communication, collaboration, analytical, problem solving and presentation skills

·      Demonstrates resilience andoptimism in the workplace.

Hiring: Air-Conditioning and Refrigeration Engineer

Must have 3-5 years of experience in air conditioning maintenance

Salary composition:

Basic Salary: 3800-4500 SGD + OT including allowances

Monday to Saturday 9am-6pm

Good work culture

Friendly boss and co-worker

Fast growing company with great potential!

Job Scope:

Servicing of air conditioner units

Topping up coolant / gas for compressors

Fixing of leaking air conditioner units

Fixing of air conditioner units that are not cold

Installation of new air conditioner units / replacement aircon units

Qualify leads and set meetings by qualifying key decision-makers to penetrate accounts and develop new prospects.

Lead and accurately record contact information in the company CRM

Must have:

- 3-5 years of experience in air conditioning maintenance

- Self motivated

Job Summary

About the Role

The Institute of High Performance Computing (IHPC), A*STAR, is seeking a highly motivated Research Engineer to develop and deploy advanced AI systems that translate cutting-edge research into scalable real-world applications.

The successful candidate will work closely with research scientists to implement, optimize, and operationalize AI models across healthcare and biomedical domains. This role combines software engineering, machine learning, and systems engineering to bridge the gap between research and deployment.

Key Responsibilities

AI System Development

• Design, develop, and maintain machine learning and deep learning systems.
• Implement state-of-the-art AI algorithms from research prototypes into production-quality software.
• Build scalable data processing and model training pipelines.
• Develop multimodal AI systems integrating text, image, video, sensor, and structured data.
• Optimize model training, inference, and deployment workflows.

Research Translation

• Collaborate with AI researchers to translate novel algorithms into robust software solutions.
• Reproduce and benchmark research models.
• Develop reusable AI frameworks, libraries, and tools.
• Support experimentation, model evaluation, and performance optimization.

Software & Infrastructure Engineering

• Design scalable cloud and on-premise AI infrastructure.
• Develop APIs, backend services, and model-serving platforms.
• Implement automated testing, monitoring, and CI/CD pipelines.
• Support large-scale distributed training and inference systems.

Deployment & Integration

• Deploy AI solutions into healthcare, scientific, and enterprise environments.
• Integrate AI systems with operational workflows and external platforms.
• Develop monitoring tools for model performance and reliability.
• Support technology transfer and production deployment activities.

Requirements

Essential

• Bachelor's or Master's degree in Computer Science, Computer Engineering, Artificial Intelligence, Data Science, or related disciplines.
• Strong programming skills in Python.
• Experience with PyTorch, TensorFlow, or similar machine learning frameworks.
• Experience in software engineering best practices.
• Familiarity with Linux, Git, and software development workflows.
• Strong problem-solving and system design skills.

Preferred

• Experience with:Large Language ModelsMultimodal AIComputer VisionMLOps platformsCloud Computing (AWS, Azure, GCP)Containerization (Docker, Kubernetes)Distributed ComputingGPU Computing

What We Offer

• Opportunity to work on cutting-edge AI technologies with real-world impact.
• Access to world-class computational infrastructure and research facilities.
• Collaboration with leading researchers, clinicians, scientists, and industry partners.
• A dynamic environment supporting innovation, learning, and career growth.

Job Description

• Industry/ Organization Type: Industrial Equipment Manufacturer
• Position Title: HVAC Solutions Sales Engineer
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 8.30am – 5.30pm)
• Salary Package: Basic salary up to $5,500 + Transport Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Identify and reach out to potential clients across sectors such as commercial, industrial, and residential
• Plan and carry out sales strategies to meet sales targets and grow market share
• Work with the engineering team to develop solutions that match client needs
• Lead site surveys with subcontractors and vendors for HVAC upgrading projects (e.g., chiller plant, airside)
• Prepare and present technical briefings and proposals to clients
• Manage the full sales process from lead generation to closing
• Prepare and negotiate sales contracts in line with company policies and customer requirements
• Prepare regular sales reports and forecasts for management review
• Carry out other duties assigned by the reporting manager

APPLY NOW!!!

• Degree in Mechanical / Electrical / Energy Engineering or equivalent
• 2–4 years of experience in the HVAC industry
• Customer-focused mindset
• Strong communication and interpersonal skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82095 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Process engineer plays a vital role in D2W hybrid bonding process optimization, yield improvement and to develop innovating process flow or path finding. PE Works closely between internal Hybrid team, partner and Customers.

• Responsible for process development & CIP’s to improve the product yield
• To conduct DOE’s and experimental process trails and data analysis
• Define new process flow for customer products and run internal feasibilities
• Provides technical subject matter expertise in the area process developments
• Understands the Hybrid bonding upstream & downstream process flow to relate actual Hybrid bonding or Fusion bonding yield related topics
• Process optimization and data analysis to improve the process responses hybrid bonding and annealing
• Supports SOP, technical documentation and product operating manual writing activities and publish BKM process flow
• Builds-up technical know-how on product/problem solving via structured knowledge transfer between the on-site support team
• Machine and Technical Support
• Machine operation and application/product setup
• Prepares and executes customer demo feasibilities and recommend the process flow
• Coordinates and provides technical solutions / problems solving on customer process related issues in collaboration with Field issues
• Investigates process issues at customer site and supports Engineering team

Education

• Master’s in mechanical/electrical/Electronics /Physics or PHD

Work experience

• Minimum 5 years relevant experience in C2W or W2W hybrid bonding and Front end wafer fab/backend process
• Significant practical experience in solving process issues and process optimizations including new process setup
• Hands-on experience in semiconductor front end or backend Process and equipment’s including defectivity & yield engineering

Expertise and methodology

• Good in MS-Office, data analysis SW like JMP, Matlab
• Hands-on Process Development Expertise and able to share the Problem Statement in crystal clear

EA License : 02C3423

EA Personnel : R22108699

Job Summary:

We are seeking a skilled Computational Fluid Dynamics (CFD) Simulation Engineer to support the simulation and analysis of fluid flow, thermal simulation, and related physical phenomena in product development. The ideal candidate will have experience with industry-standard CFD tools and a solid foundation in fluid mechanics, thermodynamics, and simulation-driven design optimization.

Key Responsibilities:

• Perform CFD simulations to support design, development, and optimization of products and systems
• Analyze and recommend designs changes in fluid flow, thermal performance, aerodynamics, and/or cooling efficiency as required by the project
• Develop computational models, define boundary conditions, mesh geometry, and run simulations using tools such as ANSYS Fluent, FloEFD, or other CFD software packages
• Interpret simulation results, create reports, and provide actionable recommendations to design and product teams
• Collaborate with cross-functional teams including design, testing, and manufacturing to integrate simulation insights into product development
• Initiate experiments to gather insights that connect the gaps between simulation models, products, and systems as needed
• Validate simulation results with physical test data and refine models as necessary
• Maintain simulation best practices and contribute to the development of simulation standards and procedures
• Stay current with emerging CFD technologies and techniques

Requirements:

• Master’s degree or higher in Mechanical Engineering, Aeronautics Engineering, Physics or relevant disciplines
• Minimum 2 years of relevant experience in fluid flow / thermal simulation
• Experience in mechanical design and experimental techniques preferred
• Programming knowledge in C/C++ and/or Python
• Proficiency in using simulation software packages such as ANSYS Fluent, FloEFD, COMSOL, or similar CFD tools

Key Responsibilities

• Conceptualize, design, and develop automation equipment and mechanical systems for cleanroom and industrial applications.
• Prepare engineering design, detailed drawings, and project cost estimation.
• Manage projects from concept stage to manufacturing and final commissioning.
• Work closely with cross-functional teams to implement design improvements and cost optimization for existing platforms.
• Provide technical solutions and troubleshooting for design issues during project execution.
• Review and verify engineering drawings and designs to ensure technical accuracy and compliance with customer requirements.
• Liaise with customers on technical specifications, design reviews, and product requirements.
• Lead machine installation, testing, and commissioning at customer sites when required.
• Ensure designs comply with relevant engineering standards (ISO9000, SEMI-S2, SOP39)

Requirements

• Diploma or Bachelor's Degree in Mechanical Engineering or related field.
• Minimum 5 years of experience in mechanical design, preferably in automation equipment, semiconductor, HDD, or precision engineering industries.
• Proficiency in SolidWorks and AutoCAD is mandatory.
• Experience in pneumatic system design and pneumatic circuit diagram preparation is required.
• Knowledge of linear motion systems
• Strong experience in preparing fabrication drawings, assembly drawings, and machine layout drawings.
• Strong problem-solving ability with a practical engineering mindset.
• Self-motivated, organized, and able to work in a fast-paced project environment.
• Good communication skills in English.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Summary 

We are looking for a QC Equipment Qualification Specialist to support qualification, lifecycle management, and decommissioning activities for Quality Control laboratory equipment within a GMP-regulated manufacturing environment. 

This role will support the execution and coordination of qualification activities, change control, validation documentation, and equipment lifecycle compliance. The successful candidate will work closely with QC, Validation, Engineering, Quality Assurance, and external vendors to ensure laboratory equipment is qualified, documented, and maintained in accordance with site and regulatory requirements. 

Your Missions 

• Support qualification activities for QC laboratory equipment in accordance with GMP, validation lifecycle, and change control requirements. 

• Coordinate and execute equipment qualification activities including IQ, OQ, and PQ where applicable. 

• Support decommissioning activities for QC laboratory equipment following approved procedures and compliance requirements. 

• Assist in defining project plans, timelines, documentation needs, and coordination activities for qualification and decommissioning projects. 

• Prepare, review, and maintain qualification protocols, reports, SOPs, risk assessments, and training materials. 

• Support deviations, investigations, CAPA, and change control activities related to laboratory equipment and qualification processes. 

• Review qualification and validation documentation to ensure completeness, traceability, and compliance with GMP and site quality expectations. 

• Collaborate with QC, Validation, Engineering, Quality Assurance, and vendors to ensure timely execution of project activities. 

• Ensure proper documentation practices, data integrity, and compliance standards are followed for laboratory equipment systems. 

• Support equipment integration activities where applicable, such as LabX connectivity or related laboratory data systems. 

• Track action items, project milestones, risks, and implementation progress to support delivery within agreed timelines. 

Your Profile 

• Bachelor’s degree in Engineering, Life Sciences, Biotechnology, Pharmaceutical Sciences, Chemistry, or a related discipline. 

• 5–8 years of experience in qualification, validation, commissioning, or lifecycle management within GMP-regulated manufacturing or laboratory environments. 

• Hands-on exposure to QC laboratory equipment qualification and validation activities. 

• Good understanding of GMP documentation, validation lifecycle, change control, deviation, and CAPA processes. 

• Experience preparing or reviewing qualification protocols, reports, SOPs, risk assessments, or validation documentation. 

• Familiarity with analytical or laboratory equipment such as continuous flow analysers, nitrogen analysers, TOC systems, gas generators, analytical balances, microbalances, or similar laboratory instrumentation would be an advantage. 

• Exposure to laboratory system integration platforms such as LabX or related laboratory software systems is preferred. 

• Strong documentation, coordination, and stakeholder communication skills. 

• Detail-oriented, organized, and comfortable working within structured quality and compliance environments. 

• Able to manage multiple tasks and timelines within project-based environments. 

What We Offer 

• An international community bringing together 110+ different nationalities. 

• An environment where trust has a central place: 70% of our key leaders started their careers at the first level of responsibilities. 

• A robust training system with our internal Academy and 250+ available modules. 

• A vibrant workplace that frequently gathers for internal events, afterworks, and team buildings. 

• Strong commitments to CSR, notably through participation in our WeCare Together program. 

As an Advanced Packaging Characterization Engineer within Advanced Packaging Technology Development (APTD), your responsibilities include but are not limited to providing package development characterization and failure analysis support for development test vehicles, qualifications, customer returns, new product introduction, and general test failures. You are the domain expert on advanced packaging characterization methodology and is responsible for establishing relevant analysis methods needed to support technology development. You will also have a thorough understanding of the product package assembly and process flow, to work with Process Integration, Process Development, and Product Engineering groups ensuring failures are classified and root cause fixes implemented.

Responsibilities and Tasks

Conduct Electrical Characterization

• Understand PFA techniques available for de-processing failures

• Understand assembly and test process

• Perform electrical verification to confirm failures

• Establish best known method for de-processing package

Provide Data Analysis

• Understand backend test flows, qualification methodologies and be able to pull relevant information

Communicate with Internal/External Groups

• Document failure analysis techniques used to isolate failure for other groups

• Quick, responsive analysis and feedback of PFA results to Product, Process Integration, Reliability, Assembly, RMA, and QRA

• Ensure the PFA lab understands best method to obtain results and ensure lab is ready for analysis of new designs

Provide Technical Expertise

• Conduct TMO training and FA certification

• Serve as technical SME and mentor, contributing to the growth of technical capabilities within the team and fostering a culture of continuous learning.

• Participate actively in technical events such as conferences, workshops and forums to share knowledge and BKM across the network.

• Engage industry experts and vendors on cutting-edge FA tools and techniques required for Advanced Packaging development roadmap.

Maintain Equipment

• Coordinate calibrations (external to Micron)

• Procure parts as needed

• Coordinate host vendors to support equipment repair

Manage Laboratory

• Consistently upholds and promotes Micron’s safety standards, ensuring all activities are conducted in a safe and compliant manner.

• Manage laboratory to comply with TS, ISO14001 and OHSAS requirements.

• To manage the exhaust and scrubber systems of the FA Lab.

• To maintain records and procedures as per Micron GOPs

Education and Experience

• PhD, Master’s, or Bachelor’s degree in Materials Science, Chemical Engineering, Electrical/Electronics Engineering or related discipline. 

• 4+ years of experience in the semiconductor process, preferably in R&D or technology development or failure analysis field, with strong expertise in failure analysis methodologies and techniques.

• Hands-on proficiency with key analytical tools and methods, including: SEM, EDX, FIB, TEM, AFM, FTIR, XPS, X-ray, CSAM, Ion Milling, delayering, and decapsulation techniques.

• Strong communication skills with the ability to collaborate effectively across internal teams and external partners.

• A mindset that emphasizes customer focus, continuous improvement, and striving for excellence.

Role Overview

We are looking for an Associate Test Engineer / Technician to handle the calibration, testing, and troubleshooting of our high-tech systems and components. You will work from technical drawings to ensure product quality, resolve technical issues, and document your findings.

Key Responsibilities

• Set up, calibrate, and test electronic circuits, mechanical assemblies, and final systems.

• Troubleshoot technical issues, identify root causes, and perform necessary rework.

• Interpret blueprints, drawings, and schematics to determine or develop test procedures.

• Prepare technical reports summarizing test results and solutions.

• Assist in selecting and setting up specialized test equipment.

Job Requirements

• Diploma or Bachelor’s Degree in Engineering.

• Hands-on experience with semiconductor equipment.

• Ability to read technical drawings and use precision measuring instruments.

• Strong troubleshooting and data analysis skills.

• Good communication and teamwork skills.

• Comfortable working in a cleanroom environment and committing to shift hours.

Preferred Skills (Optional)

• Experience with optics alignment is a strong plus.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669