Total 5,265 job vacancies in Singapore

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We’re searching for an Equipment Engineer to be part of our Thin Film CVD department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• Support CVD equipment engineering related activities to achieve operation targets and meet company objectives
• Participate in Continuous Improvement for Cost, Yield, Productivity and Uptime
• New Equipment Startup and Relocation to support Production Plan
• Tool Ownership and accountability for Uptime, Wafers scrap, Parts Management, Equipment Down Memo Reduction
• Troubleshoot and resolve Equipment issues to support daily production
• Review and optimize equipment maintenance procedures
• Consumable and spare management ensure adequate provision
• Participate in technology transfer from motherfab
• Participate in implementation of TSMC/NXP BKMs and generate SSMC BKMs
• Update of OIs and SOPs to document real and best practices
• Preventive Maintenance Planning and alignment of schedule with Manufacturing
• Conduct Training and certification for new PM crew in terms of Hands on and Theory
• Drive Manufacturing for Monitoring Time reduction to improve Uptime
• Lead/ Participate in Transform Platform and generate LSS, BKMs and Trade Secrets for value creation for the company
• Able to perform weekend 12-hour shift or Swing Shift or any shift pattern as defined by Manager

More About You:

• Bachelor in Engineering (Mechanical/Mechatronic/Electrical/Electronic)
• At least 1-3 years’ experience in semiconductor manufacturing environment.
• 5 years direct experience in CVD equipment for Diploma holders
• Knowledge in the AMAT Centura/ HDP/ Producer/ Lam Sequel
• At least 3 years’ experience in same field will be consider for senior position
• A strong background and experience in semiconductor manufacturing

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Key Responsibilities:

• Administer and maintain Microsoft Windows environments, including patch management, clustering, and Active Directory/LDAP services.
• Design and implement Azure Hub-and-Spoke network architecture.
• Develop and deploy scalable, secure, and cost-optimized cloud solutions on Microsoft Azure.
• Build and configure enterprise infrastructure systems in alignment with high-level architectural designs.
• Manage and support enterprise tools and platforms including Tanium, Azure Entra ID, Intune, Microsoft Defender for Endpoint (MDE), and Azure Active Directory.
• Execute Tanium and SCCM-related operational tasks and project deliverables.
• Participate in Microsoft 365 feature rollouts, enhancements, and related projects.
• Collaborate with project managers and stakeholders to deliver tasks within defined timelines.
• Serve as Subject Matter Expert (SME) for Wintel-related data center operations.
• Contribute to initiatives involving DevOps, Artificial Intelligence, SASE, Identity Management (IDM), Endpoint Detection and Response (EDR), SNMP, and SOC operations (good to have).

Requirements:

• Bachelors degree in Computer Science, IT, or related field (or equivalent experience).
• 8+ years of experience in Windows Server administration and project implementations
• Experience with Microsoft Active Directory, DNS, DHCP, and Group Policy.
• Familiarity with cloud platforms (Azure, AWS) and virtualization.
• Certifications such as MCSA, MCSE, AWS/Azure Certification.
• Strong knowledge of TCP/IP, VPNs, Firewalls, and Routing

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

· Time to time site temporary facility and utilization planning.

· Assist PM on detailed planning of monthly work actives, weekly schedule.

· Assist PM to draft all the progress meeting, coordination meeting minutes, method statement.

· Have experiences and able to perform delay analysis to demonstrate the number of EOT required and/ or resulted by the any delay events, to keep proper records of all the documents required for EOT and Variation claim.

· Finalised and assisted in Baseline Programme incorporating LTA comments related to Programming Plan compliance in Design, Procurement, Construction, Installation and Commissioning Phase (Software Used ‐Primavera P6).

· Update the Progress on a Monthly Basis for all Activities and generate an Overall S‐Curve.

· Prepare Weekly Trend Charts for all Major Items of Work and Monitor the Status of Progress periodically.

· Requirement;

· Minimum of 5 years of relevant experience in construction.

· planning and programme coordination for railway projects.

· Experienced in the use of Primavera.

Job Description:

• Drive the design of next-generation semiconductor automation equipment and modules, transforming ideas into functional designs and prototypes.
• Create detailed fabrication, assembly, and layout drawings using 3D CAD tools, such as CREO, SolidWorks, or other acceptable software.
• Perform structural, kinematic, and dynamic analyses, including Finite Element Analysis (FEA) simulations and tolerance stack-ups, to ensure design robustness.
• Work with software, electronics, and vision engineering teams to integrate mechanical designs into complete system solutions.
• Apply Design for Manufacturing (DFM), Design for Assembly (DFA), and concurrent engineering principles to ensure efficient and robust designs.
• Develop and validate pneumatic and hydraulic circuits and ultra-precision, high-speed pick-and-place mechanisms.
• Contribute to design standardization, cost optimization, and project management for research and development initiatives.

Job Requirement:

• Minimum Degree in Mechanical Engineering or related field
• Minimum 5 year working experience in Mechanical Design in Automation/ Semiconductor Industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Construction and Civil Engineering
• Position Title: Site Engineer (Building Construction)
• Working Location: Central
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 5:00 PM; Sat, 8:00 AM – 12:00 PM)
• Salary Package: Basic Salary
• Duration: Permanent Role

Key Responsibilities

• Assist Senior Engineers and Project Managers in monitoring project progress.
• Assist with QA/QC inspections to ensure works meet project requirements.
• Ensure safety standards are followed in the assigned work area, with support from the Safety Department.
• Supervise subcontractor works to ensure approved methods and materials are used.
• Attend progress meetings and coordinate with contractors and suppliers on project implementation matters.
• Attend site meetings when required.
• Inspect site works and monitor progress to ensure quality control and compliance with authority requirements.
• Coordinate internally with different departments and externally with clients and consultants.
• Assist in project planning, documentation, and site execution.
• Coordinate, supervise, and monitor site works, manpower deployment, material planning, and material ordering.
• Coordinate and follow up on project submissions.
• Prepare weekly site progress reports and other required submissions.
• Perform any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma or Degree in Civil Engineering, Construction Management, or a related field.
• Relevant site engineering or construction experience is preferred.
• Good understanding of site coordination, QA/QC inspection, and construction safety requirements.
• Able to read and interpret construction drawings, method statements, and project specifications.
• Good coordination and communication skills.
• Able to work independently and as part of a team.
• Proficient in Microsoft Office and relevant project documentation tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10081 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Responsibilities
Chatbook Application Maintenance

• Take over the Chatbook Application through structured knowledge transfer, documenting existing architecture, codebase, and integrations.
• Perform ongoing system maintenance including updates, bug fixes, performance tuning, and incident resolution.

AI Application Development and Integration

• Design and develop end-to-end AI solutions using LLMs, RAG architectures, and agentic frameworks.
• Build MCP-based tool integrations and agentic pipelines for enterprise system connectivity.
• Implement monitoring and observability for AI model performance and agentic behaviour.
• Translate business and stakeholder requirements into robust, AI-powered solutions.

Job Qualifications

• Degree in Computer Science, Information Systems, Engineering, or a related discipline with 2 or more years’ experience in building AI agents and multi-agent systems using frameworks such as LangChain, LlamaIndex, LangGraph, AutoGen, or CrewAI, with a solid understanding of agentic design patterns including planning, tool use, memory, and reflection.
• Working experience with MCP-based tool integrations and maintaining GenAI and agentic applications in production environments, including guardrail implementation and application evaluation.
• Knowledge of LLMOps practices, including prompt management, model evaluation, LLM observability tools (e.g. LangSmith), AI governance, and responsible AI principles.
• Solid fundamentals encompassing clean code, design patterns, testing, REST API development, containerisation, container orchestration, and CI/CD pipelines.
• Proficiency in Next.js / React, Python, TypeScript, and Tailwind CSS.
• Proficiency in relational and NoSQL databases covering query optimisation, schema design, and data management, with familiarity with vector databases for RAG and semantic search.
• Working experience with AWS cloud platform including serverless services (Lambda, API Gateway), storage (S3), monitoring (CloudWatch), and access management (IAM)
• Hands-on experience with AWS Bedrock to access and orchestrate foundation models such as Anthropic Claude, including features such as Knowledge Bases, Agents, and Guardrails for production-grade generative AI applications.
• Experience developing and deploying applications on Government Commercial Cloud (GCC) is advantageous.

We respect your privacy and all communication will be treated with confidentiality. If you wish to know more about this position or explore other roles, please prepare your updated profile and get in touch with carolyn.mendoza@manpower.com.sg | Personnel Reg No.: R1105160 | EA License: 02C3423

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by Manpower for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Our client is one of the leading players in the medical devices manufacturing sector. Due to business needs, they are now recruiting a Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the east.

The Quality Engineer's responsible is:

• Act as the Quality representative for new product development and sustaining projects within the medical device portfolio.
• Provide quality and compliance support throughout the product development lifecycle, including design changes, design reviews, verification & validation, usability studies, process validation, and labeling activities.
• Lead risk management activities, including Risk Management Plans, Hazard Analysis, Risk/Benefit Assessments, and Design/Process FMEA.
• Partner with cross-functional teams to identify product risks, investigate potential failure modes, and implement effective risk control measures.
• Ensure compliance with ISO 13485, FDA regulations, customer requirements, and applicable quality standards.
• Develop, review, and maintain quality procedures, SOPs, and documentation to support product development and Quality Management System (QMS) requirements.
• Support internal, supplier, and external audits, including the investigation and closure of non-conformities.
• Drive continuous improvement initiatives to enhance product quality, process effectiveness, and QMS compliance.
• Serve as a Quality Subject Matter Expert (SME) and provide guidance to engineering and project teams on quality and regulatory matters.

Job Requirements:

• Degree in life science related discipline
• Min 5 years experience in quality design within medical devices sector
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Perform regular checks and diagnostic activities on security systems (such as CCTV and access control) to ensure they are in good working condition.
• Set up security equipment, configure systems, and conduct testing on-site.
• Provide both front and backend support for security, video management systems (e.g., Milestone XProtect), and communication infrastructure.
• Attend to, diagnose, and resolve onsite technical issues/faults within established Service Level Agreements (SLAs).
• Prepare daily maintenance reports and maintain accurate records of service activities.
• Comply with company policies and safety regulations, ensuring work does not interrupt production.

Requirements

• Min Nitec in Information Technology, Computer Engineering, or related technical fields.
• Basic knowledge of IT networking, security systems, and troubleshooting

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of reviewing customer drawings, specifications, and BOM, understand technical requirements.
• Responsible in providing engineering expertise to resolve and troubleshoot technical issues arise in manufacturing
• Liaise with internal and external customers on requirements and propose solutions.
• In charge of machining process cycle-time estimation and submit to the Sales team
• In charge of providing technical advice to Sale, Quality and Supply Chain team.
• Preparing markup drawings & detailed subcon scopes for the Purchasing team.
• To assess in-house capability, feasibility, and cycle-time for
• Other duties as assigned

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of working experience in Precision Industry
• Proficient in AutoCAD / SolidWorks application

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Overview:

The Assistant Engineer will support the Engineer or Lead Engineer in supervising field operations, coordinating fault rectification works, and maintaining proper records in CWMS/CFEMS for street lighting and commuter facilities.

Key Responsibilities:

• Assist in overseeing site works, inspections, and testing.
• Prepare basic reports, update CWMS/CFEMS entries, and assist in work coordination.
• Follow up with contractors and technicians on rectification timelines.
• Ensure safety and quality standards are met on-site.

Requirements:

• Diploma or ITE Certification in Engineering (Electrical, Civil, or Mechanical).
• Min. 1 year of working experience preferred (Fresh graduates may be considered).
• Willingness to learn and work in a dynamic field-based environment.
• Familiarity with fault-logging systems (CWMS, CFEMS) is a bonus.

• Plan, organise, and execute assigned engineering works efficiently and effectively, including delivering TGM maintenance at customer premises per contract terms

• Ensure the smooth operation of gas supply systems and related equipment.

• Perform system design, project planning, cost estimation, and prepare technical presentations as required.

• Prepare, update, and maintain accurate technical drawings and related documentation.

• Compile and submit monthly engineering and maintenance reports in a timely manner.

• Conduct in-house technical training programmes to enhance staff competency and knowledge.

• Monitor and manage spare parts inventory to ensure adequate stock levels at all times.

• Evaluate, source, and liaise with suppliers, subcontractors, and vendors for project and operational needs.

• Ensure compliance with all relevant government regulations, safety requirements, and industry standards.

• Respond promptly to emergencies and provide technical troubleshooting and support when required.

• Perform standby duties and provide backup support during off-duty hours, including weekends and public holidays if necessary.

• Ensure all work is carried out in accordance with established standard operating procedures (SOPs).

• Promote and maintain a safe working environment, ensuring adherence to workplace safety policies and practices.

• Carry out any other duties as assigned by the superior from time to time.

Qualification and Skills

• Diploma or Degree in related field (Chemical Engineering, Safety, Environmental)

• At least 3 years of relevant experience in semiconductor, manufacturing, chemical, gas or similar working environment

• Good problem-solving and analytical skills

• Good written, verbal communication and interpersonal skills

• Experience in gas supply distribution systems would be an added advantage
  

Job Description

• Industry/ Organization Type: Building and Repairing of Ships and Boats
• Position Title: Project Engineer (Marine & Offshore)
• Working Location: Pioneer Sector 1
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 5:00 PM; Sat 8:00 AM – 12:30 PM)
• Salary Package: Basic Salary + VB
• Duration: Permanent Role

Key Responsibilities

• Coordinate project management activities, resources, equipment, and information to ensure smooth execution of marine and offshore projects.
• Work closely with clients to understand and define project requirements, scope, and objectives, ensuring they align with business goals.
• Assign tasks to internal teams and help manage schedules to improve project timelines and resource use.
• Oversee procurement to ensure materials and services are acquired on time, staying within budget and maintaining quality.
• Monitor project progress regularly, identify and address issues early to prevent delays and risks.
• Serve as the main point of contact, providing clear updates on project status to all stakeholders.
• Work with the Project Manager to align project execution with strategic goals and operational standards.
• Create and maintain detailed project documentation, including plans and reports, to ensure transparency and accountability.
• Any ad hoc duties assigned

APPLY NOW!!!

• Diploma in Mechanical or Electrical Engineering.
• Basic knowledge of the Oil & Gas and Marine industries.
• At least 3 years of experience managing projects in the marine, offshore, oil, and gas sectors.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83670 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Work toward achieving departmental goals related to revenue growth and profitability.
• Identify and develop new business opportunities to expand market reach.
• Prepare professional quotations, proposals, and preliminary system designs for clients.
• Contribute creative ideas and actionable recommendations to enhance sales results and strengthen brand visibility.
• Promote the company’s presence and reputation through effective sales and marketing initiatives.
• Build and maintain strong relationships with business partners and key stakeholders.
• Maintain up-to-date knowledge of security solutions and related technologies to provide high-quality client consultations.
• Support project management activities, attend site meetings, and communicate with clients as needed.

Job Requirement:

• Minimum Degree or equivalent qualification.
• Minimum3 year working experience in solution-based sales, preferably within the industry or similar

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The junior engineer is report to a design engineer and assisting the engineer to complete the production drawings, to develop from concept to detailing. Thereafter, the junior engineer will follow through the project from project time schedule, ITP and liaise with customer for the FAT and SAT.

The drawings are the main line of communication to our production foreman welders, and quality department to fabricate all deck machinery.

Required Skill Sets

· Proficient in AutoCAD / Solidwork to develop fabrication drawings

· Diploma or equivalent education and experience in any discipline

· Fresh diploma holder during the keystone project involve in design and hand on process to the products or during the internship in engineering firm is encourage to apply the post.

· Must have basic computer skills. (Word, Excel, Record-keeping software, Outlook, etc.)

· Ability to organize and prioritize work load

Role Summary

We are seeking a highly skilled Big Data Engineer with strong experience in PySpark and Scala to design, build, and optimizelarge-scale data processing systems.

The associate will work on distributed data platforms, enabling real-time and batch analytics solutions across enterprise data ecosystems.

The role involves building scalable data pipelines, data lakes, and streaming solutions leveraging modern big data technologies.

This role requires a combinationof:

Strong PySpark + Scala coding

Deep big data architecture knowledge

Hands-on experience with streaming + cloud data engineering

Required Skills

Core Technologies

Strong hands-on experience in:

PySpark & Apache Spark

Scala programming

Expertise in:

Spark SQL, Data Frames, RDDs

Distributed data processing frameworks

Department Overview:

The Intl AI CoE plays a key role in defining and implementing the firm's AI strategy, driving change through these capabilities, enforcing data, cloud and AI governance for the firm, and elevating Nomura's data culture.

Role Description:

• Information delivery & analytics. State-of-the-art expertise across, Large Language Model (LLM) Integration, prompt engineering strategies and templates, retrieval-augmented generation (RAG) and agentic system etc.
• AI Ops. Responsible for integration, deployment and monitoring of Generative AI products and solutions. Enabling data architecture and delivery of data-analytics AI platforms and Solutions- on-premises, cloud, and hybrid ensuring adherence and conformance to Nomura standards and policies
• Be a trusted partner. Shape the information & analytics agenda at Nomura, and work with all of Nomura’s businesses in laying out their information & analytics adoption roadmaps.
• Risk Mindset: Familiar with risk and controls frameworks and ability to operate with a control mindset

Skills, experience, qualifications, and knowledge required:

Core Skills requirement:

• Proven experience in designing and developing AI agents or chatbots using Large Language Models (LLM), RAG, and agentic frameworks.
• Hands-on experience in building context-aware dialogue systems with multi-turn conversation management features.
• Demonstrated experience in developing and maintaining APIs and SDKs for integration of Generative AI services.
• Experience in developing and deploying scalable, fault-tolerant microservices and server-side APIs using modern frameworks and best practices.
• Proven experience in deployment automation using CI/CD pipelines (e.g., Jenkins, GitLab) and applying DevOps methodologies and enterprise integration standards.
• Proficiency in programming languages such as Python, SQL, and Unix scripting for AI and data processing workflows.
• Experience with cloud technologies such as AWS EC2, EMR or similar tools with ability to drive design and data model discussions, hybrid data architecture.
• Proficiency in React with hands-on experience in UI development a plus.
• Experience collaborating with global and cross-functional teams across different regions and time zones to deliver AI solutions.
• Demonstrated ability to manage multiple concurrent AI projects and meet delivery timelines in dynamic environments.
• Experience managing stakeholder expectations of senior management.
• Proficiency in written and verbal communication skills, including the ability to document and present complex concepts.
• Demonstrated analytical skills to assess technical problems, evaluate data-driven insights, and recommend actionable solutions.
• Experience reviewing system requirements, identifying optimization opportunities, and proposing enhancements aligned with organizational goals.

Education and experience

• At least 4-year Bachelor’s degree in quantitative fields with minimum of 5 years of relevant data experience in data engineering /Gen AI, full stack engineering, preferably in financial organizations or Masters in quantitative fields (Computer Science, Computer Engineering, Statistics or similar)
• Experience of working with a multi-cultural, multi-disciplined, globally dispersed teams
• Professional certifications in AI/ML frameworks, cloud technologies, or DevOps tools (e.g., AWS Certified Machine Learning, TensorFlow, or Kubernetes) are advantageous.

Nomura Competencies

Explore Insights & Vision

• Identify the underlying causes of problems faced by you or your team and define a clear vision and direction for the future.

Making Strategic Decisions

• Evaluate all the options for resolving the problems and effectively prioritize actions or recommendations.

Inspire Entrepreneurship in People

• Inspire team members through effective communication of ideas and motivate them to actively enhance productivity.

Elevate Organizational Capability

• Engage proactively in professional development and enhance team productivity through the promotion of knowledge sharing.

Inclusion

• Respect DEI, foster a culture of psychological safety in the workplace and cultivate a "Risk Culture" (Challenge, Escalate and Respect).

Diversity Statement

Nomura is committed to an employment policy of equal opportunities and is fundamentally opposed to any less favourable treatment accorded to existing or potential members of staff on the grounds of race, creed, colour, nationality, disability, marital status, pregnancy, gender, or sexual orientation.

DISCLAIMER: This Job Description is for reference only, and whilst this is intended to be an accurate reflection of the current job, it is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. The management reserves the right to revise the job and may, at his or her discretion, assign or reassign duties and responsibilities to this job at any time.

Nomura is an Equal Opportunity Employer
SFID: 11821