Total 15,208 job vacancies in Singapore

We are currently partnering with our client, a leading engineering and technology organization, to hire a highly driven Electrical Design Supervisor for a major Water Reclamation Plant project based in Singapore. Renowned for delivering high-quality, innovative solutions, our client supports customers worldwide with cutting-edge technologies that enhance operational performance and sustainability.

This role offers an exciting opportunity to contribute to a large-scale infrastructure project, where you will be involved in end-to-end electrical system delivery from design and vendor management to installation, commissioning, and post-handover support. Working alongside experienced professionals and industry-leading partners, you will play a key role in ensuring project success while developing your technical expertise in a dynamic, site-based environment.

Responsibilities

• Electrical lead in the project and to drive vendors and client for the electrical system design and approval. Be the main interface in the project with the client and other contractors in ensuring that all required information are clearly communicated, received and documented.
• To lead and review the Design of the UPS and UPS Distribution from vendors to ensure compliance to Contract’s specification
• To provide the computation of the voltage drop computation and cable sizing recommendation to ensure compliance to the regulatory requirement
• Review and preparation of the contractual documentation (including FAT procedure, SAT procedure, Method Statement, Risk Assessment, cable schedule, installation requirement, BOM generation, etc), of which some of them are provided by the vendor.
• Proactive Monitor and resolution of all technical issues from the electrical system design, installation and commissioning progress, etc between the vendor and client
• Work closely and proactively with the Installation contractor, vendors and client to ensure smooth installation and commissioning of the system.
• Active review of the interface requirement between other packages to ensure a smooth coordination between the various parties in the project team.
• Take the lead in the installation and commissioning work until successful start up and handover.
• Ensure compliance of the project deliverable as per contractual requirements, recommend solutions and way forward.
• Any other work activities that will be required to ensure smooth Engineering, procurement, manufacturing, installation, construction and commissioning of the electrical system as per contract.
• Familiar with the Singapore regulatory requirements for the electrical system installation.
• Support the post commissioning maintenance of the electrical system, with support from vendor when required, and system troubleshooting as required.
• Candidate with LEW license will have an added advantages.
• Occasional Travel to vendor’s office will be required.

Requirements

• Diploma/Bachelor degree in Engineering or similar field.
• At least 5 years’ experience in electrical system design, site installation and Commissioning work, involving Electrical System at a construction site
• Preferably equipped with the necessary Singapore Regulatory certifications required for working in construction site
• Ability to recognize and proactively respond to dynamic site situation and liaise with the necessary parties to resolve.
• Ability to relate with different groups of people at various levels of the organization
• Pragmatic approach to scope of work and work environment
• Familiar with the local regulatory and project requirement for construction work in Singapore
• Strong commitment to safe work practices and dedication to following all relevant workplace safety guidelines.
• A collaborative approach to working, demonstrating strong communication and leadership skills.
• Added advantages – LEW certification.

Only shortlisted candidates will be contacted.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098 | REA License No: 16S8067

Shinu Alexander: R1657042

Job Description:

•  Lead preparation, coordination and monitoring of project submission and progress
• Plan and collaborate closely with Project Managers and site teams to align design deliverables with site execution plans and overall project schedules.
• Coordinate closely with Design Consultants, and technical departments to ensure design quality, milestone and timeline are met
• Review and coordinate with Design Consultants to ensure submission packages are compliant and constructable
• Monitor submission plans and approval plans status
• Lead and support interfacing coordination with other project stakeholders, land owners, and authority/agency etc.
• Prepare and present progress report, schedule forecast and design status updates for management and client review.

Job Requirement:

• Five (5) years relevant experience in Singapore LTA cycling path project, pedestrian improvement works and/or street works with a Main-Contractor environment
• Degree in Civil/Structural Engineering recognized by PE Board or qualification accepted by the Commissioner of Building Control for registration as Resident Engineer
• Experience with Design Consultant on submission and requirement with relevant nature of project (e.g. Cycling Path network, Street Works, Road Works etc.) will be an advantage
• Familiarity with relevant agency and authority regulation on street works
• Candidates with experience in LTA project environment are preferred

We are seeking a talented Lead Designer - Workplace. You will be part of our design studio designing Corporate / Workplace Interior projects. Working closely with the design team, you will be responsible for developing design concepts for corporate interior projects and leading client presentations/pitches as well as design management and coordination for projects.

In Brief

● You will be responsible for working on strategizing design solutions to fit assigned programs and budgets.

● You will work on multiple projects and provide pre-design services which may include conducting feasibility studies or specifying the requirements the design must meet.

● You will work closely with the design team and manage the development of design successfully from one phase to the next, without compromise to quality, budget, or schedule.

● You will lead and participate in project meetings and Client presentations as needed & working closely with the team, you will be responsible for design management and coordination with project stakeholders as needed.

● You will provide quality control and review design documentation and schedule project team deliverables.

● You will attend Client work-sessions and design reviews as required.

● You will travel for assigned project presentations, coordination meetings and site visits as required.

Requirement:

● You have 10+ years of experience of working on Commercial interior / Corporate Interiors/Workplace design projects & managing a team.

● You have a strong design sensibility and the technical ability to develop a project from concept to execution.

● You are a team player with a positive attitude to go the extra mile.

● You have multi-tasking ability, with time management and organizational skills.

● You have a registered Diploma or Degree in Interior Design or Architecture.

● You have an excellent knowledge of design tools such as AutoCAD, Sketchup and Photoshop.

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

You will support the design team in creating physical experiences that translate complex ideas into spatial stories. This is a hands-on role where you will learn how to guide visitor movement, interaction, and understanding through thoughtful environmental design.

Key Responsibilities

• Concept Support: Assist in researching and developing exhibition themes based on project briefs and audience demographics.

• Visual Communication: Help produce mood boards, 3D models, and sketches to communicate design intent to the team.

• Technical Assistance: Support the preparation of floor plans, zoning diagrams, and basic technical drawings for fabrication.

• Collaboration: Work alongside content, graphic, and UX designers to ensure the narrative is consistent across all touchpoints.

• Prototyping: Assist in the development of interactive displays and engagement "moments" within the exhibition space.

• Production Prep: Help manage asset lists, material samples, and design revisions during the production phase.

• Site Support: Attend site visits and assist the senior team during the installation and build-out process.

Requirements

• Education: Current student or recent graduate in Exhibition Design, Interior Design, Architecture, or a related spatial field.

• Portfolio: A portfolio that demonstrates spatial thinking, creativity, and a basic understanding of how people move through a space.

• Software Skills: Familiarity with tools such as SketchUp, Rhino, or AutoCAD, and proficiency in the Adobe Creative Suite (Photoshop, Illustrator, InDesign).

• Curiosity: A strong desire to learn about materials, fabrication techniques, and the "behind-the-scenes" of museum or trade show builds.

• Communication: Ability to clearly explain your ideas and take constructive feedback during the design process.

• Adaptability: Comfortable working in a fast-paced environment with a "no task is too small" attitude.

Responsibilities

• Develop and execute SEO initiatives to improve website visibility, search rankings, and organic traffic growth.
• Plan, manage, and optimise digital marketing campaigns across variousonline channels, including social media, email marketing, and paid media.
• Leverage AI-powered tools and technologies to enhance keyword research,content performance, campaign effectiveness, and marketing insights.
• Analyse website traffic, campaign performance, and user behaviour toidentify opportunities for continuous improvement.
• Work closely with content and marketing teams to ensure digital assets are aligned with SEO best practices and audience engagement goals.
• Support market-specific digital marketing activities across multiple countries, adapting strategies to suit local audiences and business objectives.
• Track industry developments, search engine algorithm updates, and emerging digital trends to maintain a competitive advantage.
• Collaborate with cross-functional stakeholders to ensure digital marketing initiatives support overall business growth and brand objectives.

Requirements:

• Proven experience in SEO, digital marketing, or performance marketing with a track record of delivering measurable results.
• Strong understanding of SEO tools, web analytics platforms, and AI-driven marketing solutions.
• Excellent analytical, problem-solving, and communication skills with the ability to interpret data and translate insights into action.
• Comfortable working in a fast-paced environment and managing campaigns across multiple markets or regions.
• Prior exposure to property, real estate, investment holding, or related industries will be advantageous.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.
Email resume to ken.ng@peopleprofilers.com

People Profilers Pte Ltd, 20Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

PostingPersonnel: Ng Jwee Ken

Ref: JOB-00423

Job Title:

Civil and Structural (C&S) Design Engineer

JobPurpose:

To undertake the analysis, design, andcoordination of civil and structural engineering works for building andinfrastructure projects in Singapore, ensuring compliance with projectrequirements, relevant Singapore Standards, statutory regulations, and clientspecifications.

KeyResponsibilities:

• Carry out civil and structural analysis and design for buildings, infrastructure, roads, drainage systems, retaining structures, and ancillary structures.
• Prepare structural calculations, engineering reports, technical specifications, and detailed drawings for project submissions and construction.
• Design reinforced concrete, steel, masonry, and temporary works in accordance with relevant Singapore Standards (SS EN Eurocodes) and applicable National Annexes.
• Ensure all designs comply with the requirements of the Building and Construction Authority (BCA), the Land Transport Authority (LTA), and other relevant authorities where applicable.
• Coordinate with architects, M&E engineers, geotechnical engineers, contractors, and other consultants to ensure seamless project delivery.
• Prepare and support submissions to statutory authorities and address technical comments arising from authority reviews.
• Liaise with Qualified Persons (QP), Accredited Checkers (AC), clients, and project stakeholders on technical and design matters.
• Review shop drawings, BIM models, method statements, and contractor submissions to ensure compliance with approved designs.
• Attend design coordination meetings, technical discussions, and site meetings.
• Conduct site inspections and provide technical support during construction to resolve design-related issues.
• Participate in value engineering exercises to develop practical and cost-effective design solutions.
• Ensure timely completion of design deliverables in accordance with project schedules and quality requirements.
• Maintain proper records of design calculations, drawings, revisions, and project documentation.

Requirements:

• Degree in Civil or Structural Engineering from a recognised university.
• Minimum 2–5 years of relevant experience in C&S consultancy or design engineering works in Singapore.
• Proficiency in design software such as ETABS, SAFE, STAAD.Pro, SAP2000, MIDAS, AutoCAD, and Revit.
• Good knowledge of Singapore Standards (SS EN Eurocodes), BCA regulations, and local authority submission procedures.
• Familiarity with BIM processes and digital engineering practices.
• Strong analytical, technical, and communication skills.

PreferredQualifications:

• Experience in preparing authority submissions and coordinating with regulatory agencies.
• Experience in building, infrastructure, or civil engineering projects in Singapore.

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

About the role

We are seeking an experienced HVAC Design Engineer to join our team and contribute to industrial projects across sectors such as Pharmaceutical, Semiconductor, Data Center, Food, Daily Chemical, and New Energy facilities, both locally and internationally. 

Responsibilities

Lead and support industrial projects both domestically and internationally.

Independently develop HVAC design deliverables for CD, BD, and DD phases, including but not limited to:

• User Requirement Specifications (URS)

• Load Calculations & Air Balance Calculations

• Airflow & Instrument Diagrams

• AHU Zoning Layouts

• Pressurization Layouts

• HVAC Design Reports

• Duct Layouts

• Technical Specifications

• 3D Modelling (Revit) or SketchUp

• Detailed Drawings (Development/Review)

• Shop Drawings (Development/Review)

Coordinate and/or manage LDI/PE/QP activities throughout design and project execution.

Support procurement activities, including:

• BOQ preparation and value engineering

• Preparation of tender documents

• Technical bid evaluation and reporting

Review design submissions from consultants and subcontractors to ensure compliance with project requirements, applicable standards, and local regulations.

Liaise with overseas stakeholders, project teams, vendors, and clients as required for project coordination and technical discussions.

Provide site construction support when required.

Support FM/LEED design consultancy tasks.

Requirements

• Minimum 6 years of relevant HVAC design experience; candidates with over 10 years of experience are preferred.

• Ability to work independently while collaborating effectively within multidisciplinary teams.

• Proficient in AutoCAD, Revit, Navisworks, CFD, and other relevant engineering software.

• Familiar with FDA/cGMP/ISO14644 standards and general engineering practices.

• Knowledgeable in local building codes and international standards such as IBC, IMC, ASHRAE, etc.

• Strong understanding of HVAC equipment and material selection.

• Leadership experience is an advantage.

• Good written and verbal English communication skills.

• Ability to communicate effectively with stakeholders, vendors, consultants, or project teams across regional markets where Mandarin is commonly used.

• Willing to travel for short-term business assignments (3–6 months).
  

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai

  EA License No: 23S1595 | EA Registration No: R25127838

1) Job Description

- An experienced qualified drafter, details design documents by using BIM, - Ensure BIM standards comply with Authority submissions - Awareness of requirements of relevant authorities submission (i.e. BCA, SCDF, LTA).

-Liaise with and assist engineers / supervisors / coordinators to develop conceptual design to 2D or 3D drawing model for site

- Able to read and interpret structural plan/drawings.

- Able to multi-task drafting works with reasonable time and ad hoc duties as assigned.

- Ensure designs/drawings meet relevant code compliance requirements and good engineering practices.

- Proficient in Microsoft Office, Autocad, Civil 3D, Revit software, Architecture,

- Knowledge and proficiency in 2D, 3D aided software and BIM Tools is an advantage.

'- Excellent interpersonal and communication skills, self-motivated, hardworking, independent & able to work with minimum supervision.

- Minimum 2 to 4 years of relevant experience, projects in Singapore is an added advantage

'- Familiar with Microsoft Excel, Word, Autocad, Photo Shop, Power Point, Sketchup & V-ray, Enscape for rendering and Adobe ( Photoshop )

2) Qualfication Requirtment

- Diploma / Bachelors’ Degree in Interior Design or ID Architecture

- Certificate in Revit Architecture ( BIM Modeling - Archi, C&S, MEP )

- Certificate in Quantity Survey

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

This position is for a Senior Electrical Design Engineer in Singapore. 

Mission

As part of a project team:

• Act as the leader of the technical content of the project, and be the single point of contact regarding all project technical topics;
• Make sure customer technical requirements are fulfilled (in terms of performance, quality, costs, and time), in compliance with the contract, and based on the Architecture & Technical specifications defined during the tendering phase
• Lead a technical team composed of "customer project technical designers and engineers" and ensure technical coordination of all projects stakeholders
• Lead all technical aspects of customer integrated projects, such as design, implementation, testing, FAT in compliance with Singapore statutory requirement and industry standards.
• Manage technical risks and interfaces between the project team stakeholders and the customer; and get final customer approval of the overall technical solution designed and delivered in ensuring regulatory compliance (IEC, IEEE & NEMA)

Scope and Environment

• Part of a customer project execution/application center;
• Project technical teams are located spread among one or several sites/countries, requiring international collaboration with other functional teams/stakeholders.

What will you do?

Technical team coordination & management:

• Lead & approve the basic and detailed design of all technical aspects of an integrated solution, in line with customer and contract requirements (technical performance);
• Make sure the project technical team delivers according to the project planning;
• Monitor technical costs, make sure budget for the technical part is under control;
• Coordinate all technical implementation activities done at factories or supplier premises and testing facilities until project closure.

Technical coordination of project stakeholders:

• Work in close collaboration with PM & other technical designers and engineers who take care of part of the technical scope;
• Identifies whether specific expertise support is needed and coordinate the expertise actions if any;
• Lead and coordinate all technical aspects of the sub-contracted parts of the project, in strong coordination with the procurement team;
• Act as a single point of contact for all project stakeholders regarding the technical content of the project; and ensure technical coordination among the project team.

Design & Implementation: according to her/his field of knowledge,

• Perform, review some design and specification activities, by leveraging Schneider Electric portfolio of products & systems in an optimized manner, in order to maximize profitability and limit technical risks; May perform some implementation/test activities (testing, FAT, etc).

Risk & Opportunity Management, Change management, Alert:

• Identify any potential changes versus contract or already agreed design;
• Work closely with PM to specify the changes and their implications for Schneider Electric (including cost impact evaluation), until getting a variation order.
• Alert PM of any substantial issue that could affect the project performance or customer satisfaction.

Customer interactions:

• Lead technical discussions and clarifications with customers.
• Act as the key and trusty contact person for all technical topics related to the project.

Quality process, Methods, Tools:

• Support PM to ensure full compliance with Schneider-Electric processes (especially CPP & TDP), and with quality instructions, safety requirements, and governance principles.
• Lead the technical team to correct any technical deviations or quality issues occurring during project execution.

Community of practices & Coaching:

• Take part in Technical Leaders' Community of Practice within her/his Execution Center, or globally within Technical Excellence Community network.
• Identify, get, formalize, share and promote lessons learned and best practices.
• Act as a role model and/or coach junior technical engineers and designers.
• Be connected with LoBs and stay tuned on the last technical evolutions of equipment & systems (in her/his field of engineering, acting then as a referent in the Community).

What qualifications will make you successful for this role?

Education

• Minimum Bachelor’s Degree in Electrical Engineering.

Experience

• 5 years in leading technical scope of projects in Power System or Electrical Distribution System application
• 5 years working in one or several engineering application domains: Power, Automation & Software, Telecom & IT, Cyber Security, Mechanical & HVAC, Structural.
• Technical experience in a specific market segment (e.g. Power GRID & Utility, OGP, MMM, F&B, etc..) or in a customer application/process is a plus.
• Ability to read and understand applicable standards
• Ability to learn from others, share her/his knowledge, coach others and collaborate efficiently.

Skills

• Strong knowledge of electrical power systems and building services design.
• Proficient in engineering software and tools (e.g. AutoCAD Electrical, Revit, ETAP).
• Solid understanding of electrical codes and standards.
• Excellent technical problem‑solving and analytical skills.
• Effective communication skills for coordination with authorities and stakeholders.
• Ability to lead technically and work independently under minimal supervision.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

About studioMilou Singapore

studioMilou Singapore is an architecture and design practice working across hotel, residential and heritage projects. We are seeking a full-time Interior Design Coordinator to support our architectural and design team across our current portfolio of interior design projects.

Job Description / Responsibilities

•     Supporting the architectural and design team on interior design projects across the hotel, residential and heritage sectors.

•     Performing accurate data entry and maintaining the practice’s project databases and digital design management systems.

•     Organising and maintaining the studio’s project documentation system, keeping records orderly, current and readily retrievable.

•     Maintaining an inventory of design samples and conducting product and materials research to support ongoing projects.

•     Undertaking other reasonable design-support duties as required by the architectural and design team from time to time, commensurate with the role.

Requirements

•     A diploma or degree in interior design or a closely related design field, from an accredited institution.

•     At least one year of experience in an architectural or interior design practice, including data entry and the maintenance of project databases or design management systems.

•     A methodical, organised approach to project documentation, record-keeping and the maintenance of design sample inventories.

•     Familiarity with interior design projects in the hotel, residential or heritage sectors is an advantage.

•     Proficiency in standard office and design documentation software.

How to Apply

Interested applicants are invited to apply through MyCareersFuture with an up-to-date CV. All applications will be considered fairly on the basis of merit, skills and experience. We regret that only shortlisted candidates will be contacted.

Job Summary:

As a Project Coordinator (Graphic Design), your primary focus will be to liaise closely with our team of graphic designers to ensure the seamless execution of visual projects, including coordinating with vendors for photography and videography. If you're passionate about graphic design, possess strong organisational skills, and thrive in a collaborative environment, we want to hear from you!

Responsibilities:

• Collaborate with local and remote design teams to ensure product listing images accurately represent our brand identity, colors, prints, and products.

• Review and provide feedback on product listing images to ensure they meet quality standards and are visually appealing to customers.

• Develop comprehensive shot lists for photoshoots and video shoots in alignment with mood boards and brand guidelines.

• Coordinate with photography and videography vendors to ensure timely execution of projects, accurately following shot lists and storyboards.

• Serve as the primary point of contact for external vendors.

• Organize and manage digital assets, ensuring they are easily accessible for visual content creation.

Requirements:

• Diploma in Graphic Design, Visual Arts, or a related field.

• Experience in graphic design coordination or a similar role is a plus; fresh graduates are welcome. Training will be provided.

• Proficiency in design software such as Adobe Creative Suite (Photoshop, Illustrator).

• Strong organizational and time management skills (plus point)

• Excellent communication skills and the ability to collaborate effectively with internal teams, remote graphic designers, and external vendors.

• Attention to detail and a keen eye for ensuring visual content meets quality standards and is visually appealing to customers.

• Ability to thrive in a fast-paced, deadline-driven environment.

• Experience working with remote teams is a plus.

• Fresh graduates with a design-related major are welcome to apply.

• Must be able to communicate professionally in English and Chinese, as you will need to liaise with overseas vendors from the USA and China.

Responsibilities:

• Lead and support HVAC projects across all design stages (CD, BD, DD) for industrial facilities.
• Develop HVAC design deliverables including load calculations, airflow diagrams, ducting layouts, HVAC reports, technical specifications, and 3D modeling (Revit/SketchUp).
• Coordinate with LDI/PE/QP and manage project design execution.
• Support procurement activities including BOQ preparation, value engineering, tender documentation, and technical bid evaluations.
• Review contractor and LDI submissions to ensure compliance with project requirements, codes, and URS standards, and provide site support when needed.

Qualifications:

• Minimum 6 years of relevant experience
• Able to work independently with strong teamwork and collaboration mindset.
• Proficient in AutoCAD and related tools (Revit, Navisworks, CFD, etc.).
• Familiar with FDA, cGMP, ISO 14644, and general engineering standards.
• Knowledge of local building codes and international standards (IBC, IMC, ASHRAE, etc.).
• Strong understanding of HVAC system design and material selection.
• Leadership experience is an advantage.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

MAIN DUTIES AND RESPONSIBILITIES:

●     Develop electrical engineering design for semiconductor backend machines.

●     Create electrical drawings, bill of materials, and other design documents, and maintain design history.

●     Collaborate and interface with other functional teams (mechanical design, process, software, manufacturing, and purchasing, etc.) to achieve project goals.

●     Participate in new product development and support existing products for continuous improvements.

●     Support new product transfer from R&D to product teams.

●     Conduct testing and analysis using engineering instruments.

EDUCATION AND EXPERIENCE

• Bachelor’s degree in Electrical/Electronic/Mechatronics Engineering or relevant qualifications.
• Diploma holders or fresh graduates with good aptitude will be considered.
• Self-motivated and willing to learn new technology and skills.
• Familiar with any electrical CAD software package.
• Good team player who can work well within a multidisciplinary team.
• Hands-on experience in electrical system or subsystem design will be a plus.
• Knowledge in motion control systems will be a plus.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

1) Job Description

- An experienced qualified drafter, details design documents by using BIM, - Ensure BIM standards comply with Authority submissions - Awareness of requirements of relevant authorities submission (i.e. BCA, SCDF, LTA).

-Liaise with and assist engineers / supervisors / coordinators to develop conceptual design to 2D or 3D drawing model for site

- Able to read and interpret structural plan/drawings.

- Able to multi-task drafting works with reasonable time and ad hoc duties as assigned.

- Ensure designs/drawings meet relevant code compliance requirements and good engineering practices.

- Proficient in Microsoft Office, Autocad, Civil 3D, Revit software, Architecture,

- Knowledge and proficiency in 2D, 3D aided software and BIM Tools is an advantage.

'- Excellent interpersonal and communication skills, self-motivated, hardworking, independent & able to work with minimum supervision.

- Minimum 2 to 4 years of relevant experience, projects in Singapore is an added advantage

'- Familiar with Microsoft Excel, Word, Autocad, Photo Shop, Power Point, Sketchup & V-ray, Enscape for rendering and Adobe ( Photoshop )

2) Qualfication Requirtment

- Diploma / Bachelors’ Degree in Interior Design or ID Architecture

- Certificate in Revit Architecture ( BIM Modeling - Archi, C&S, MEP )

- Certificate in Quantity Survey

Job Description:

• Perform AUTOCAD 2D drawing - single line drawing, system general arrangement, system dimension details, system layout arrangement, system termination details and system internal wiring details;
• Work closely with the system engineer to gather the specifications and supplier documentations to proceed with the required drawings.
• Convert sketch from system engineer into technical drawings.

Requirements:

1. Diploma in telecom, or equivalent technical discipline.

2. AUTOCAD trained / certified

3. Proven 1 years’ experience in a similar role within the market/industry.

4. Well organized documentation and design standard

5. Objective driven, time-sensitive and resourceful.

6. Good to have System knowledge of PAGA, CCTV, GMDSS and related telecom systems;

7. Sound coverage study using CadnaA software will be a plus.

We are looking for someone who can assist external vendor who is creating website for a range of new health products .. Must be able to manage website, customer service, Basic design and graphic works, Basic videography (shoot and edit), computer savvy, social media account management and logistics for orders.. Must be able to handle Chinese (speaking and reading)

Job Responsibilities

• Construct and update 3D BIM models using Autodesk REVIT to reflect the latest design information and ensure drawing accuracy
• Collaborate with multidisciplinary teams to coordinate design changes and resolve model challenges
• Prepare BIM models to support visualization and enable informed decision-making based on design updates
• Ensure M&E designs comply with relevant codes, regulations, and design specifications
• Produce combined M&E services drawings, builders work drawings, and detailed shop drawings aligned with design criteria
• Perform clash detection within BIM models to identify and resolve conflicts proactively
• Adhere to BIM Execution Plans and project workflows to maintain consistent processes and quality
• Follow BIM content standards and development procedures to ensure uniformity and high-quality deliverables
• Document all drawings with proper version control and traceability for project records
• Conduct modelling quality control checks to uphold accuracy and completeness of BIM outputs
• Perform additional duties as assigned to support overall project success and delivery

Job Requirements

1. Diploma or Degree in MEP or equivalent qualification
2. Minimum 2 years of relevant working experience in BIM modelling and M&E design
3. Knowledge of Singapore BIM requirements and standards
4. Proficient in Autodesk REVIT for BIM modelling and drawing production
5. Skilled in AutoCAD for drawing linkage and cleanup
6. A team player with sense of responsibility

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Job Responsibilities:

• Construct and update 3D models using Autodesk REVIT to produce accurate construction drawings
• Incorporate latest design changes into 3D models to maintain up-to-date shop drawings
• Collaborate with multidisciplinary teams to resolve design challenges and coordinate model changes
• Prepare BIM models to support visualization and informed decision-making based on design updates
• Verify M&E designs comply with relevant codes, regulations, and standards
• Produce architectural layouts and detailed shop drawings aligned with design criteria and specifications
• Perform clash detection to identify and resolve conflicts within models
• Adhere to BIM Execution Plan and project workflow requirements to ensure consistent processes
• Follow BIM content standards and development procedures to maintain quality and uniformity
• Document all drawings properly to ensure traceability and version control
• Conduct modelling quality control to uphold accuracy and completeness
• Perform additional duties as assigned to support project success

Job Requirements:

1. Diploma or Degree in Architecture, Structural Engineering, or equivalent
2. Minimum 3 years of relevant working experience
3. Proficient in Autodesk REVIT for 3D modelling and drawing production
4. Skilled in AutoCAD for drawing linkage and cleanup
5. Knowledge of BIM requirements according to Singapore standards
6. Familiarity with Singapore Architectural Authority requirements

Job Responsibilities:

• In charge of construction of 3D model and prepare drawings using REVITsoftware
• Updating of 3D model in accordance with latest information to ensureaccuracy of shop drawings
• Collaborate and coordinate with other discipline’s design-changes andmodel challenges
• Prepare BIM models to communicate, aid visualization and make informeddecision based on the design changes
• Produce and check structural rebar shop drawings to ensure details arein line with the design criteria and specification
• Produce structural layout and detailed shop drawings for civil andstructural engineering works in accordance to design criteria and specifications
• Perform clash detection to identify and resolve conflicts withinmodels
• Adhere to BIM Execution Plan and projectworkflow requirements to ensure consistent processes
• Follow BIM content standards anddevelopment procedures to maintain quality and uniformity
• Document all drawings properly to ensuretraceability and version control
• Conduct modelling quality control touphold accuracy and completeness
• Perform additional duties as assigned to support project success

Job Requirements

1. Diploma or Degree in Structure, Architecture, or equivalent
2. Minimum 3 years of relevant working experience
3. Knowledge of BIM Requirements in Singapore standard is a plus
4. Proficient in the use of Autodesk REVIT is a must
5. Skilled in AutoCAD for drawing linkage and cleanup
6. A team player withsense of responsibility