About the Role

We are looking for a Process Utilities Engineer experienced in semiconductor utility systems.

Responsibilities

• Design and coordinate: Chilled Water (CHW) Process Cooling Water (PCW) CDA Systems Vacuum Systems Exhaust Systems
• Prepare engineering calculations and equipment specifications.
• Review vendor and subcontractor designs.
• Support installation and commissioning activities.

Requirements

• Diploma / Degree in Mechanical Engineering or other related Engineering disciplines.
• Experience in semiconductor utility systems.
• Knowledge of SEMI standards.
• Experience in design and site execution.

Job Description:

• Analyse SPC chart. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyse split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on pass down to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Manufacturing can have more flexibility.
• Perform process matching between equipment to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self-audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics /Microelectronics / Chemical Process Engineering / Chemistry / Physics related major
• Min 2 years working experience in Diffusion (implant, Furnace and WET/Clean Tech) Process.
• Good interpersonal skills and is an excellent team player
• Logical thinking capability and good analytical skill
• Highly level of integrity with good ownership and accountability
• Passion for the semiconductor / manufacturing industry

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition

• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology

• Establish process parameters for a variety of semiconductor equipment to ensure line stability

• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics

• Demonstrated experience of at least 5-7 years in semiconductor foundry dry etch module process

• 22/28 nanometer and below advance technology nodes experience is highly desirable

• Strong understanding of process development, optimization and troubleshooting.

• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer

• Ability to analyze complex process issues, identify root causes, and implement effective solutions

• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred

• Able to commit shift work

Introduction:

Process integration in development, optimization, and qualification of semiconductor devices/processes to meet performance requirements.

Your Job:

• Process integration in development, optimization, and qualification of semiconductor devices/processes to meet performance requirements.

• DOE design, execution, and analysis of results.

• Partner process module engineers to improve device/yield performance.

• Own and drive technical process problem solving.

• Interact with internal & external customers and respond to technical queries.

• Establish new technology design rules, test structures and test methodologies.

• Innovate new methods of continuous process/device improvement.

Other Responsibilities:

Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Education - Degree/master's in electrical, Electronics Engineering or equivalent.

• 4 year’s relevant experience for Degree.

  Wafer Fab process integration experience is required.

Preferred Qualifications:

• Knowledge of semiconductor device physics and/or RF fundamentals (e.g. S-parameters) is a plus.

• Independent, resourceful, with a positive attitude toward continuous learning & knowledge acquisition.

• Excellent analytical and optimization skills.

• Great interpersonal skills and ability to work with cross-functional teams.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

Job Description

Micron’s NAND Process Development (PD) Singapore group is looking for process development engineer to support TD activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Process module ownership involving Chemical Mechanical Planarization (CMP) process characterization and advanced process development for 3D NAND and beyond.

• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.

• Transfer CMP processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.

• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.

• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.

• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive multi-functional teams in implementation

• Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally.  Strict alignment to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements

• Bachelors’/Masters in Materials Science, Chemical Engineering or Physics with minimum 5 years hands-on experience in groundbreaking CMP polishing equipment such as AMAT or EBARA, or

• PhD in Materials Science, Chemical Engineering or Physics.

• Lead and mentor CMP engineers early in their careers while driving technical excellence.

• Build, lead, grow a capable CMP team for NAND technology development

• Excellent problem-solving skills and critical decision making

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Proven ability to collaborate with local and overseas teams on projects

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

About the role

We are looking for a capable Process Design Engineer (Black Utilities) to support the design, coordination, and optimization of utility systems such as chilled water, heating hot water, compressed air, and steam systems. This role involves system sizing and calculation, layout development, equipment selection, and cross-disciplinary technical coordination. 

Responsibilities 

• Design black utility systems, including chilled water, heating hot water, compressed air, and steam systems.

• Perform system calculations for the above utilities and develop related system layouts, piping arrangements, and equipment specifications.

• Prepare datasheets for utility equipment and valves, and participate in technical bid evaluations.

• Maintain strong knowledge of commonly used utility equipment brands, including their features and performance characteristics.

• Coordinate with other disciplines, review returned design documents, and ensure compliance with project requirements and process standards.

• Track industry trends and support company marketing efforts and technical presentations when needed.

Requirements

• Bachelor’s degree or above in HVAC, Energy, Thermal Engineering, or a related discipline.

• At least 5 years of experience in utility system design, heating/cooling source systems, or engineering management.

• Proficient in CAD and other relevant design software.

• Strong knowledge of cleanroom design standards and specifications.

• Good communication and presentation skills, with a strong sense of responsibility and self-discipline.

• Mandarin language skills are required for coordination with Mandarin-speaking stakeholders. 
  

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai

  EA License No: 23S1595 | EA Registration No: R25127838

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

Applied Materials is seeking a highly experienced and strategic Director, Technical Engineering (NAND) to lead technology engagement, process engineering excellence, and customer collaboration for advanced NAND memory solutions. You will work closely with key customers and internal stakeholders to solve complex integration challenges and influence product and technology roadmaps.

Key Responsibilities

• Act as the subject matter expert for NAND technologies. Drive development and optimization of process solutions across etch, deposition, patterning, and integration.
• Lead root cause analysis and resolution of complex yield and defectivity issues. Guide technical strategy aligned with future NAND technology nodes.
• Serve as the primary technical interface for strategic NAND customers. Build strong relationships with customer engineering and fab leadership.
• Lead technical reviews, escalations, and roadmap discussions. Translate customer requirements into actionable engineering solutions.
• Oversee PSE activities covering installation, qualification, and process optimization.
• Drive improvements in yield, throughput, and tool performance. Establish best practices and ensure consistent execution across global teams.
• Partner with R&D, Product Engineering, Operations, and Commercial teams. Provide field insights to influence product development and enhancements.
• Build organizational capability in advanced NAND process technologies. Foster a culture of innovation, accountability, and customer focus.

Requirements

• PhD or Master’s in Electrical Engineering, Materials Science, Physics, or related discipline.
• 15+ years in semiconductor industry with strong focus on NAND memory.
• Experience in process integration or module engineering (etch, deposition, CMP, or patterning).
• Proven years of experiences in leading and mentoring a highly-performing and technical engineering teams.
• Proven track record supporting high-volume manufacturing and customer-facing roles.
• Experience with leading NAND manufacturers is highly preferred.

Work Location

• Upper Changi

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborate with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks as assigned to support project and team objectives

Requirement

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Main Responsibilities: 

• Configure and support MES workflows within PharmaSuite / Catalyst
• Support electronic batch record (EBR) design and execution
• Work closely with operations, QA, and IT teams for system integration
• Perform testing, validation, and troubleshooting of MES workflows
• Support change control, system upgrades, and hypercare activities

Requirements: 

• At least 4 years of experience in MES within pharma manufacturing
• Hands-on experience with PharmaSuite / Catalyst systems
• Strong understanding of GMP, ISA-95, and batch processes
• Exposure to system interfaces (ERP / DeltaV / PLC) and validation lifecycle

Contract Duration: 12 months with options to renew based on performance

• MNC (Woodlands)

• Company Transport Provided

• Basic: $5500 to $7000+ AWS + VB

• Excellent Benefits + Career Progression

• Process Manufacturing Plant
  

Job Responsibilities:

• Assist in managing daily production operations to ensure smooth and efficient plant operations

• Monitor production performance, process efficiency, product quality, and operational KPIs

• Coordinate manpower planning, production scheduling, and machine utilization to meet production targets

• Work closely with maintenance, warehouse, and utilities teams to minimize downtime and operational disruptions

• Support troubleshooting, process optimization, and continuous improvement initiatives within the plant

• Ensure compliance with GMP, HACCP, FSSC22000, workplace safety, and food quality standards

• Investigate production deviations and implement corrective and preventive actions

• Lead and supervise production operators, technicians, and shift personnel
  

Requirements:

• Degree / Diploma in Chemical Engineering, Food Technology, Manufacturing, or related discipline

• Minimum 5 years of production experience in edible oil, food manufacturing, FMCG, refinery, chemical, or process plant environment
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

As part of the Process Engineering group, this position involves contributing to the development of thin film solutions for thermal management product.

The role also involves establishing and optimizing related process parameters related to dicing, mask design, plating/sputtering thin films.

Also work closely with internal cross-functional teams, external vendors and technology partners on application development from concept prototype phase to production introduction.

Roles & Responsibilities

• Develop processes to deposit conductive (metal) films by Plating, PVD Sputtering and Vacuum Evaporation.
• Develop film characterization techniques for metrology and inspection.
• Provide day-to-day operations of deposition tools - tool and process monitoring, post PM process qualification, troubleshooting.
• Prepare project updates and goals.
• Work closely with integration and test teams on developing critical to quality (CTQ)metrics, root cause analysis (RCA) and corrective actions for yield improvements.
• Work closely with equipment engineers and external suppliers on tool improvements and selection of new equipment.

Requirements

• ITE/Polytechnic/Degree in Materials Engineering or related field
• Min. 2 years of experience leading manufacturing process development in at least one of the following fields: semiconductor front or back end such as wafer bumping, dicing, mask design, plating and thin film process development.
• Experience of using UHV vacuum manufacturing equipment and associated sensors and components (Pumps, valves, pressure sensors, spectrometers, MFC's, pressure controllers, pyrometers, etc.)
• Experience working on material development and process engineering.
• Experience in statistical analysis methods and tools, design of experiment.
• Understanding of materials characterization and FA techniques
• Good communication and teamwork skills.
• Willing to work in Tuas South area.

Benefits

• Company transport will be provided at mrt.
• Transport allowance will be given.
• Additional company holidays shutdown per year will be given.
• Other staff welfare benefits.

Job Description

• Masking, grit blasting, and chemically cleaning parts to prepare for coating or heat treatment.
• Operating vacuum furnaces for processes like hardening, tempering, annealing, and brazing.
• Setting up and performing plasma spray coating, judging spray flow and speed for precision.
• Measuring coating thickness, maintaining logs, ensuring work meets specifications and quality requirements.
• Using stackers and other machinery to move materials and parts.
• Completing paperwork, system transactions, and adhering to safety & quality protocols.

Requirements

• Min Nitec in Precision Engineering / Aerospace Machining / Mechanical or equivalent
• Min 2 year of experience in laboratory in Aerospace Industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Process Engineer (CNC Machining) - Milling/Turning/EDM/Lathes

• Up till $6500 Basic + AWS + Variable Bonus
• Monday-Friday, 7.30am-5pm
• Location: Pioneer (transport provided)
• 3 years of experience in CNC machining or related processes

RESPONSIBILITIES:

• The Process Engineer (Machining) will be responsible for industrializing machining processes (includes CNC mill/turn, EDM, lathes) for gas turbine component repairs.

• This role includes the implementation and qualification of new equipment and technologies, as well as driving continuous process improvement initiatives.

• Industrialize machining processes for new and existing products - Qualify CNC milling/turning, EDM, lathes, and other machining processes to ensure they meet specifications and quality standards.

• Collaborate with cross-functional teams to optimize machining processes for manufacturability and cost-effectiveness.

• Ensure all machining processes adhere to Safety, Quality, Delivery, and Cost (SQDC) standards.

• Monitor and report on key performance indicators (KPIs) related to machining processes.

• Implement corrective actions to address any deviations from SQDC standards.

• Lead risk reduction and quality improvement projects to enhance machining processes.

• Drive productivity and sustainability projects to reduce waste and improve efficiency.

• Utilize Root Cause Analysis (RCA) tools and methodologies to solve complex problems.

• Provide technical guidance, training and support to machining operators and technicians.
  

REQUIREMENTS:

• Bachelor degree in Mechanical Engineering from a recognized university.

• 3 years of experience in CNC machining or related processes

• Knowledge of gas turbine component repair is advantageous.

• Familiarity with tooling selection, fixture design, CAD, CAM, and metrology.

• Proficiency in reading and interpreting engineering drawings and specifications.

Special Process (Thermal Spray)

We are part of a leading aerospace and industrial engineering environment specialising in advanced component repair and surface engineering solutions. Our focus is on high-precision thermal spray technologies used in gas turbine and aero-derivative engine maintenance.

• S$3,500 + AWS (1 month) + Variable Bonus (up to 2.5 months)

• Transport provided for convenience

• Attractive night shift allowance of $14 per night

• Annual Flexible Benefits of $500

• Pioneer, Singapore

• Rotating shift (every 2 weeks):

  • 7:30AM – 7:30PM (Day Shift)

  • 7:30PM – 7:30AM (Night Shift)

• Work pattern: 4 days on, 2 days off

Job Responsibilities

As a Special Process (Thermal Spray) Technician, you will be responsible for performing precision coating and surface treatment processes for high-performance engine components.

Your responsibilities include:

• Performing thermal spray and/or GEL coating for gas turbine and aero-derivative engine repair

• Carrying out blasting, polishing, heat treatment, and other related surface preparation processes

• Following work instructions to ensure accurate and consistent task execution

• Maintaining product quality, equipment care, and production output targets

• Ensuring proper housekeeping and adherence to production schedules

• Complying strictly with all EHS (Environmental, Health & Safety) regulations

• Reporting any unsafe conditions or practices immediately

• Supporting other duties as assigned

Requirements

• 3 years of relevant working experience

• Able and willing to work rotating shifts (day and night)

• Ability to follow structured work instructions and production processes

The Process engineer plays a vital role in D2W hybrid bonding process optimization, yield improvement and to develop innovating process flow or path finding. PE Works closely between internal Hybrid team, partner and Customers.

• Responsible for process development & CIP’s to improve the product yield
• To conduct DOE’s and experimental process trails and data analysis
• Define new process flow for customer products and run internal feasibilities
• Provides technical subject matter expertise in the area process developments
• Understands the Hybrid bonding upstream & downstream process flow to relate actual Hybrid bonding or Fusion bonding yield related topics
• Process optimization and data analysis to improve the process responses hybrid bonding and annealing
• Supports SOP, technical documentation and product operating manual writing activities and publish BKM process flow
• Builds-up technical know-how on product/problem solving via structured knowledge transfer between the on-site support team
• Machine and Technical Support
• Machine operation and application/product setup
• Prepares and executes customer demo feasibilities and recommend the process flow
• Coordinates and provides technical solutions / problems solving on customer process related issues in collaboration with Field issues
• Investigates process issues at customer site and supports Engineering team

Education

• Master’s in mechanical/electrical/Electronics /Physics or PHD

Work experience

• Minimum 5 years relevant experience in C2W or W2W hybrid bonding and Front end wafer fab/backend process
• Significant practical experience in solving process issues and process optimizations including new process setup
• Hands-on experience in semiconductor front end or backend Process and equipment’s including defectivity & yield engineering

Expertise and methodology

• Good in MS-Office, data analysis SW like JMP, Matlab
• Hands-on Process Development Expertise and able to share the Problem Statement in crystal clear

EA License : 02C3423

EA Personnel : R22108699

• $4000-$6000 + AWS + Variable Bonus + Flexi Benefits (salary will commensurate according to experience & qualifications)

• Working days: Mon-Fri, 7.30am-5pm

• Working location: Pioneer

• Global leader in energy technology

• Stable MNC with career growth opportunities

• Exposure to advanced engineering solutions

• Contribute to sustainable energy initiatives
  

Responsibilities:

• Industrialize machining processes for new and existing products - Qualify CNC milling/turning, EDM, lathes, and other machining processes to ensure they meet GE Vernova specifications and quality standards.

• Collaborate with cross-functional teams to optimize machining processes for manufacturability and cost-effectiveness.

• Ensure all machining processes adhere to Safety, Quality, Delivery, and Cost (SQDC) standards.

• Monitor and report on key performance indicators (KPIs) related to machining processes.

• Implement corrective actions to address any deviations from SQDC standards.

• Lead risk reduction and quality improvement projects to enhance machining processes.

• Drive productivity and sustainability projects to reduce waste and improve efficiency.

• Utilize Root Cause Analysis (RCA) tools and methodologies to solve complex problems.

• Apply lean manufacturing principles to process design and improvement.

• Identify and eliminate non-value-added activities in machining processes.

• Provide technical guidance, training and support to machining operators and technicians.
  

Requirements:

• Bachelor's degree in Mechanical Engineering from a recognized university.

• Minimum of 3 years of experience in CNC machining or related processes

• Knowledge of gas turbine component repair is advantageous.

• Familiarity with tooling selection, fixture design, CAD, CAM, and metrology.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements

• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors/Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry and related

• A deep understanding of chemistry, chemical kinetics, thermodynamics and  mass transport

• Opportunity to travel overseas for an extended period of time for collaborative R&D work assignment.

• 2-3 years of experience in Semiconductor Equipment/Process development is preferable

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Proven ability to collaborate with local and overseas teams on projects

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Ability to be a self-motivated individual and be adaptable

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

• Display Micron Value of People. Innovation, Tenacity, Collaboration and Customer Focus

Position Summary:                 

• Leads process improvement initiatives through the disciplined use of measurements, accountability, analysis and discussion of process alternatives and best practices

• Brings expertise in support of multi-functional efforts in process improvement, data capture and analysis, process ownership and compliance with procedures, etc.

• Ensures that policies and procedures align with corporate vision

Responsibilities:

• Acquire and maintain a clear understanding of the processes and technologies utilized in Illumina’s products, parts, and services.

• Review, evaluate, enforce and enhance Warehouse and Logistics Work Instructions (WIs) to ensure regulatory (eg. MDSAP) compliance.

• Provide quantitative and analytical insight on Supply Chain processes.

• Lead regional and global supply chain process improvement initiatives for warehouse and logistics ensuring cross functional linkage between strategy, operational plans, and key metrics.

• Partner with IDS (Illumina Digital Services) and GOA (Global Operations Analytics) to manage enhancements deployments which will meet Global Supply Chain’s strategic business vision.

• Drive release process control and governance, partnering with IDS (Illumina Digital Services) and workstream stakeholders.

• Drive process and continuous improvement initiatives in supply chain by embracing lean methodologies to reduce waste and incorporating market best practices.

• Own Illumina’s control standards and support audits for Warehouse Operations activities.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Requirements:

• Strong understanding of Warehouse and Operations business processes with a proven record of reducing waste and driving value

• Effective problem-solving ability to influence others (cross-functionally and globally)

• Proven record of implementing standard business processes in the warehouse and logistics space

• Good understanding of SAP and other warehouse and operations business systems architecture and data inputs for process analysis

• Experience with end-to-end supply chain and interacting with different Operations divisions such as Procurement, Quality and Manufacturing is a must

• Analytical skills and experience with SQL, databases, visualization applications such as Tableau/Power BI

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodation for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Bachelor’s degree in supply chain or related field is required. MBA or Masters in Supply Chain is a plus

• At least 5 years work experience in Supply Chain.  Experience in a medical device company is preferred.

• Strong verbal and written communication and interpersonal skills

• Analytics skills including methods/models and tools such as SQL, Basic scripting and visualization tools such as Tableau/Power BI is required.

• Lean/Six Sigma Certification is a plus

Responsibilities

·      Provide on-site technical support to front-end semiconductor OEM and fabrication customers for fluid system, gas delivery, and process application challenges.

·      Diagnose and resolve complex tool, system, process, and fluid delivery issues impacting customer uptime, yield, reliability, and operational performance.

·      Conduct root cause investigations and recommend corrective and preventive actions to resolve customer concerns.

·      Support tool installation, startup, qualification, and troubleshooting activities within customer facilities.

·      Evaluate customer fluid systems and identify opportunities to improve performance, reliability, safety, and operational efficiency.

·      Provide technical expertise and best-practice recommendations for high-purity fluid systems and gas delivery systems.

·      Lead technical discussions with customer engineering teams and establish credibility through deep application and process knowledge.

·      Develop and maintain strong technical relationships with key stakeholders within front-end semiconductor OEM and fabrication customers.

·      Work closely with Sales to identify, develop, and promote application solutions, products, and engineering services opportunities.

·      Conduct customer site assessments and technical evaluations to identify opportunities for process improvements and solutions deployment.

·      Design and develop application solutions proposals in collaboration with Sales, Engineering Services, and Commercial Proposal teams.

·      Support technical clarification meetings, solutions presentations, and customer workshops as required.

·      Collaborate with global Engineering Services teams, Product Engineering, Product Management, and Strategic Account teams to resolve customer challenges and support business growth initiatives.

·      Provide customer insights, application feedback, and market intelligence to support product development and strategic account planning.

·      Support internal associates' technical knowledge development through product, application, and semiconductor process training.

·      Support the development and execution of commercialization plans and strategic initiatives to grow semiconductor products, application solutions, and engineering services business.

·      Leverage internal technical resources and subject matter experts to deliver differentiated customer solutions and experiences.

·      Extend technical support to strategic regional customers and distributor partners as required

·      Other duties and assignments as assigned from time to time.

Requirements

·      Bachelor's degree in Mechanical Engineering, Chemical Engineering, Electrical Engineering, Materials Engineering, Instrumentation Engineering, or a related engineering discipline.

·      Minimum 5 years of relevant experience in front-end semiconductor OEMs, semiconductor fabrication facilities, application engineering, process engineering, tool engineering, field engineering, or technical customer support roles.

·      Hands-on experience supporting semiconductor manufacturing equipment, including installation, startup, qualification, troubleshooting, and performance optimization activities.

·      Strong understanding of semiconductor manufacturing processes such as Deposition, Etching, Photolithography, Implantation, and/or related wafer fabrication technologies.

·      Experience with high-purity fluid systems, gas delivery systems, and associated semiconductor process applications.

·      Knowledge of semiconductor tool architecture, subsystem interactions, and fab/sub-fab operations.

·      Familiarity with common failure modes including leaks, particle generation, flow performance issues, contamination risks, and system response challenges.

To find out more about this opportunity, please contact Lionel Liew at lionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No:R1330693

Job Description

• Adherence to the established company core values, operations and safety policies and procedures.
• Troubleshoot and take corrective action to ensure operating parameters are within Standard Operating Condition for the production of quality products.
• Perform routine patrol check, collect data and safety inspections on the Ultem Polymerization Process.
• Actively participate in EHSS activities including concern reporting, Safety Risk Assessment (SRA), EHSS committee meeting
• Assist in maintenance works and perform routine cleaning of process equipment such as heat exchanger and strainers.
• Maintain established 5S standard at workplace.
• Capture all the activities and adjustment made during shift in the logbook, and proper escalation for any unresolved operational variances.
• Follow up and follow through all TOI/TA/Interlock bypass according to plan/instruction.
• Manage and coordinate logistic and downstream production team for raw material handling, finish good management, and packaging.
• Participate drills and emergency response trainings to ensure high degree of readiness in response to any emergency situations.
• Conduct patrol checks in the plant and ensure all the process conditions are within SOC/QSOC. Complete daily functional area field log sheets, and daily reporting (logbook)
• Monitor DCS control consoles for process performance on a continuous basis, including process parameters, alarms, and provides feedback of corrective action and optimization to subject matter engineers.
• Monitor sample results from analytical laboratory and follow instructions to make adjustment from DCS console whenever necessary.
• Lead problem-solving within the team and generate quality/safety non-conformance report whenever necessary.
• Conduct on-the-job training for new hires or newly assigned area technicians and complete all required certification per master training plans.
• Lead & Deploy resources within shift teams during plant upset/emergency situations.
• Develop and update SOP, SRA and other training materials when needed.
• Identify opportunities and work with other teams to drive continuous improvement on EHSS, cost saving, quality and/or yield.
• Assign as change leader and raise MOC for production as required.
• Liaise with shift leaders, maintenance, engineering, and contractors to address the identified EHSS/Quality issue.
• Able to support Process Order Technical Completion.

Requirements

• Min. NITEC or Higher NITEC in Chemical Process / Mechanical Engineering with extensive years of working experience in Polymer and Chemical Plant Operations.
• Diploma or Bachelor degree in Chemical Process Technology / Mechanical Engineering or other equivalent.
• 2-3 years’ relevant work experience in Chemical Process Plant.
• Good knowledge and experience in PTW system and ERT training.
• In-depth knowledge in polymerization processing, fire vessel operation, and solid handling.
• Mechanical related working experience is a plus
• Knowledgeable about chemical process plant operation
• Knowledgeable in mechanical equipment
• Knowledgeable about emergency response practices
• Basic investigation skills to make right judgement in the continuous operational environment
• Basic knowledge in results trend analysis
• Working knowledge of office software.
• Good communication skills (both oral and written) and interpersonal skills.
• Capable of calm and clear communication under pressure
• Strong adherence to EHSS requirements
• Able to perform 12hrs rotating shift work.

Job Description

• Masking, grit blasting, and chemically cleaning parts to prepare for coating or heat treatment.
• Operating vacuum furnaces for processes like hardening, tempering, annealing, and brazing.
• Setting up and performing plasma spray coating, judging spray flow and speed for precision.
• Measuring coating thickness, maintaining logs, ensuring work meets specifications and quality requirements.
• Using stackers and other machinery to move materials and parts.
• Completing paperwork, system transactions, and adhering to safety & quality protocols.

Requirements

• Min Nitec in Precision Engineering / Aerospace Machining / Mechanical or equivalent
• Min 2 year of experience in laboratory in Aerospace Industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900