Responsibilities:

• Select, use, and maintain service tools correctly to perform assigned tasks efficiently and safely.
• Install electrical components, including switches, sensors, transducers, transmitters, current transformers, alternator components, and control panels.
• Perform engine wiring installation in accordance with engineering drawings and specifications.
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, and related parts.
• Carry out engine valve lash adjustments to ensure optimal engine performance.
• Assist in and perform mechanical installation works, including radiator assemblies, couplings, engines, alternators, gearboxes, piping systems, and hoses.
• Assist in and perform alignment works for radiator assemblies, engines, and alternator installations.
• Prepare generator sets for load testing activities.
• Conduct safety device testing and load testing, including recording and documenting all required operational parameters and test results.
• Connect and utilize Electronic Technician (ET) diagnostic tools to retrieve engine diagnostic codes, event logs, and operational data.
• Perform troubleshooting and fault diagnosis on engines and generators, identifying root causes and implementing corrective actions.
• Ensure all work is carried out in compliance with safety regulations, quality standards, and company procedures.

Requirements

• Possess an ITE or equivalent.
• Minimum 5 years of relevant hands-on experience.
• Electrical hands-on experience is a must.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel: 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

RecruitFirst is hiring!
You will be outsourced/deployed to our client!

Office Admin Works.

MS Office.

Good Computer Knowledge

Good Communication Knowledge ( Strong in English )

Marketing Knowledge

Handling Invoices and quotation

stock checking and stock verification

Tally Software.

Preparing Tax Invoice works.

Operation Management.

General Administration.

Accounts and Finance Management.

Payroll Management

To inspect semi-finished or finished parts / products to ensure that they conform with specifications laid down by the Company.

Acts in strict compliance with company's quality control procedures. Conducts sampling inspection on semi-finished or finished products to ensure that they conform to specifications as laid down. Performs dimensional, functional or other tests using specified measuring and test equipment. Records results on specified data sheets and control charts. Isolates and identifies defective parts / products and reporting and highlighting variances / defects to line and quality control Managers. May also perform trial run inspection for new projects / products.

To monitor the quality control procedures.

Performs inspection support, including first piece, in-process and final inspections. Conducts process and procedural audits and coordinates calibration programs on equipment. Maintains the QC documentation system. Also supervises and trains junior QA / QC staff.

Responsible for maintaining incoming and outgoing QC and conducts internal quality audits to ensure the company operations comply with the ISO standards.

Job Description

Duties & Responsibilities:

General repair and maintenance of Electrical, Plumbing, Sanitary systems, Air-conditioning, Ventilation system, Mechanical Equipment and Fire protection system etc

Perform preventive maintenance work & carry out duty on modification and installation of M&E equipment and appliances

Attend to guests’ and tenants complaints

Requirements:

Candidate must possess at least NTC 3 / NITEC in Electrical/ Mechanical Engineering/ Building Services or equivalent

1 year of relevant experience in hospitality preferred

Entry level ITE candidates are welcome to apply as we will offer training

Able to commit to shifts, weekends and public holidays

Benefits: Staff duty meal and uniform are provided.

The Eye Specialist for Animals is seeking a veterinary nurse/ patient care assistant for a full-time position, average 44 hours per week (4 days work week). No scheduled weekend work.

We are a specialist practice with 1 board-certified veterinary eye specialist supported by an intimate team of experienced nurses.

Our practice is well-equipped with the state-of-the-art ophthalmic equipment as we are the only eye specialist in town. We are also well-equipped with advanced anaesthesia monitoring equipment and ventilator.

The qualities we look for are:

1. great communication skills

2. love for animals

3. Not squeamish with eyes

Our nurses get plenty of hands-on learning and support from our existing team.

Job Scope but not limited to:

1. Surgery duties – surgical instrument care and sterilizing, anaesthesia monitoring, and post-op patient care, preparing for surgery…etc.

2. Consultation – packing medications, explaining medications to owner, discharging patients …etc.

3. General nursing duties – caring for hospitalized eye patients, IV catheters placement

4. Assisting specialist

5. Running various eye tests

6. Surgical instrument care and sterilizing, patient care and general nursing, putting eye drops into our patients, holding patients for procedures/ consultation.

If you are interested in this position, please send in your CV. Those who are looking for a career change are welcome to apply.

Salary will be commensurate with experience.

To apply, please send your cover letter and resume to jiec@eyespecialistforanimals.com. Your application should state the name and contact details of your referees.

What you will do:

As Senior Service Technician, you will play a crucial role in ensuring the efficient operation, maintenance, and servicing of HVAC systems. Your expertise in servicing, maintenance, overhaul, testing, and commissioning will contribute to the optimal performance of our clients' heating, ventilation, and air conditioning systems. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service.

How you will do it:

• Perform routine servicing, maintenance, and inspection of HVAC systems to ensure proper functioning and efficiency.

• Overhaul and repair HVAC equipment, including identifying and resolving any issues or malfunctions.

• Conduct testing and commissioning of newly installed or repaired HVAC systems to verify their performance.

• Diagnose problems, troubleshoot issues, and recommend appropriate solutions to ensure continuous system operations.

• Collaborate with other team members and communicate effectively with clients to address inquiries and provide technical support.

• Maintain accurate records of service reports, equipment status, and maintenance schedules.

• Adhere to safety protocols and industry standards during all tasks and assignments.

• Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.

• Support proposals to support recommendations and solutions.

What we look for:

• O Level / A Level / ITE / Diploma in Mechanical and Electrical with 1 years working experience.

• Proven experience in maintenance, repair and troubleshooting within related fields of HVAC (Heat Ventilation Air Conditioning) or BAS (Building Automation System)

• Experience in working in mechanical or electrical works within HVAC industry

• Ability to read schematics and write up report

• Able to travel if need

• Willing to learn new things and is a good teammate.

• Able to provide good customer service skills to our customers.

• Possess knowledge in HVAC will be added advantage

• Willingness to on standby and backup 

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (4pm - 1.30am). Transport provided.

Work Location

• Tampines/ Upper Changi

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We’re looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Technician to be part of our Automation & Systems (AMHS & Support) Department diverse team of talent.

What you will be working on:

• Performing routine maintenance, troubleshooting, and repairs on Automated Material Handling Systems to ensure smooth and continuous material flow.
• Monitor AMHS performance via control systems and dashboards.
• Respond promptly to system alarms and faults, ensuring minimal disruption to operations.
• Perform basic troubleshooting on conveyors, OHT (Overhead Transport), stockers, hoists, and related subsystems.
• Perform preventive maintenance (PM) as per schedule and checklists.
• Conduct inspections and routine servicing of mechanical, electrical, and sensor components.
• Replace worn or faulty parts such as belts, motors, sensors, and actuators.
• Identify causes of AMHS malfunctions using diagnostic tools and system logs.
• Escalate complex issues to AMHS Engineers or OEM support as needed.
• Pass down all repair and troubleshooting activities accurately.
• Assist in start-up and shutdown procedures of the AMHS.
• Support lot recovery operations and ensure safe transport of materials.
• Follow cleanroom protocols and safety guidelines where applicable.
• Assist in maintaining an organized stock of tools and components.
• Provide feedback on recurring issues and suggest improvements to maintenance procedures.
• Participate in system upgrades, retrofits, and project support as required.
• Work at height

More about you:

• High school diploma or technical certification required.
• Ability to work at height using ladders mobile platforms and safety harness
• Associate degree in Electronics, Mechatronics, Industrial Maintenance, or related field preferred.
• Work at height certified
• 1–3 years of experience working with automation equipment or AMHS systems in a manufacturing or warehouse environment.
• Basic understanding of electrical, mechanical, and control systems.
• Ability to read schematics, manuals, and technical drawings.
• Strong attention to detail and safety awareness.
• Ability to work independently and in a team in Standard or swing shift
• Willingness to work in shifts, weekends, or on-call as needed.
• Experience with systems such as Daifuku, Muratec, or similar AMHS vendors.
• Familiarity with cleanroom protocols (for semiconductor fabs).
• Basic understanding of SECS/GEM interactions.

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

We are seeking motivated and hands-on Production Technicians to support the manufacturing, assembly, testing, and troubleshooting of precision laser products and optical systems. This is an excellent opportunity for candidates with a mechanical, electrical, or electronics background who enjoy working in a technical manufacturing environment.

Key Responsibilities

• Perform assembly, testing, and troubleshooting of laser products, sub-assemblies, and components according to documented specifications.
• Carry out fiber handling, splicing, routing, pig-tailing, laser diode operation, and diode replacement activities.
• Perform optical, mechanical, and electrical assembly work, including rework and component replacement when required.
• Conduct optical alignment and testing using precision instruments and measurement equipment.
• Troubleshoot production and test failures, identify root causes, and perform corrective actions.
• Read and interpret technical drawings, schematics, work instructions, and assembly procedures.
• Ensure products meet quality standards and delivery schedules while adhering to safety and manufacturing procedures.
• Support preventive and corrective maintenance activities and contribute to continuous process improvements.

Requirements

• NITEC, Higher NITEC, Diploma, or equivalent qualification in Mechanical, Electrical, Electronics Engineering, or a related technical discipline.
• Entry-level candidates with relevant technical training are welcome to apply. Candidates with relevant production or assembly experience are encouraged to apply.
• Experience in mechanical, electrical, optical, or precision equipment assembly will be an advantage.
• Experience in laser products, fiber optics, optical alignment, or laser component testing is highly desirable.
• Ability to read and interpret technical drawings, schematics, and work instructions.
• Hands-on experience with precision tools and testing instruments is preferred.
• Strong troubleshooting skills with a positive attitude and willingness to learn.
• Able to perform shift work in a manufacturing environment.

Working Hours & Benefits

• Permanent Night Shift (Monday to Friday)
• Competitive monthly salary with overtime pay and night shift allowance
• Annual Variable Bonus based on company performance
• Opportunities to develop technical skills in advanced manufacturing and laser technology

Interested candidates are encouraged to submit their resumes outlining their relevant experience and achievements toapply88(@)talentvis.com or click apply!

**We regret to inform that only shortlisted candidates would be notified**

EA License No: 04C3537

EA Personnel No: R22106683

EA Personnel Name: Yang Hui Shan, Sherri

Job Responsibilities

• To meet daily production targeted output and defined quality requirements.

• Ensure defined KPI’s like OEE, PPM etc. are met for the stamping APU.

• Run production and perform quality check on the part as per the check list and record data in relevant forms.

• Escalate quality or other issues if found, during production run and record data in related documents like OEE/TEEP, PPM, Production film, Changeover log card, Go first part, Red bin pareto, Kaizen board, Production analysis board, TRMO.

• MFG Pro transaction and SPC input.

• Carry out simple adjustment to tooling to ensure good quality part.

• Load and unload metal coil from the decoiler according to the Stamping Process Sheet and pass strip.

• Prepare slug drums and press ancillary equipment during tool changeover.

• Ensure 5S in and around the stamping press as per the defined norms.

• Conduct re-work, re-screen and sorting work as and when necessary.

• Assist in Set up of tooling in the press and unloading of the tooling, as and when necessary.

• Ensure that the slug drum is not full and cutting oil etc. as per the checklist are verified and recorded when starting production. Top up or changing of cutting oil when necessary.

• Slug drums to be moved to storage location after use.

• Strictly compliance to safe work practice and maintain high safety standard.

Job Requirements

• Min NTC 3 in Mechanical Engineering

• Min one year experience in stamping industry

• Preferably with 2 to 3 years in high speed stamping experience

• Demonstrated knowledge of stamping safety

• Demonstrated knowledge of manufacturing process

• Demonstrated knowledge of analytical problem/issue in stamping process

• Demonstrated knowledge stamping equipment associated with electronic connector technology

• Demonstrated ability to perform inspection Profile projector

• Ability to train others to perform inspection

• Able to work independently with minimum guidance

• Willing to learn

Working hours:

Shift work,3 shifts, 8 hours rotation (5656)

Responsibilities:
• Perform quantitative analysis of precious metals using fire assay, ICP-OES & XRF.
• Ensure laboratory equipment is properly maintained and calibrated to achieve reliable results.
• Oversee routine administrative tasks and support laboratory operations when required.
• Promote and uphold workplace organization and efficiency through the implementation of 5S practices.

Requirements:
• Diploma/Degree in Chemistry with 5 years of experience
• Independent and a good team player
• Proficient in preparing clear reports and communicating findings effectively across teams

Please submit your resume in MS Word format to sunnie@united-personnel.com

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#02-75 WCEGA Tower
Singapore 658065
Tel: +65 65651939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Main Duties And Responsibilities To Be Accomplished :

• Organize the maintenance schedule for all equipment in Plating

• Carry out installation and modification of machines and equipment

• Carry out all general maintenance work on plating line equipment, ie motor, pump rectifier etc.

• Carry out general electrical works, repairs, troubleshooting and maintenance of machines and equipment.

• Liaise with vendor to do repair on equipment or process, cleanness

• Purchase component and spare part related to electrical and control item to minimize the cost

• Daily / periodic check, record and feedback all plating equipment for continuous operation

• Support DI/waste treatment operation

Requirements

• Diploma in Electrical or Mechanical

• More than 3 years of working experience in maintenance environment

• Able to read electrical drawing and Autocad experience

• Able to work independently with minimum guidance.

• Able to communicate effective

• Willing to overtime when required

Working hours:

Shift work,2 shifts, 12 hours rotation (4 days work week)

Job scope:

• Performing Installation & modification of electrical, electromechanical and electronic parts of forklifts
• Troubleshooting electrical systems & wiring of electrical panels
• Understanding schematic diagram

Requirements:

• ITE/Diploma in any engineering related field
• Experience in hands on technical roles and able to read schematic diagram

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (7am - 4.30am)

Work Location

• Tampines/ Upper Changi

Are you a passionate Building Technician with a strong commitment looking for your next challenge? Ultimately Chambers Property Management Services Pte Ltd offer you a competitive compensation structure along with career growth opportunities for professional development.

What you'll be doing

Property Maintenance & Technical Services

• Conduct routine inspections of common areas and facilities, and perform authorized preventive, corrective maintenance on buildings, facilities system, not including but not limited to electrical, plumbing, sanitary system, mechanical and ACMV as directed by the supervisor.

Emergency Response & Customer Service

• Attend to all emergencies and resident complaints promptly, politely, and tactfully.

Inventory & Asset Management

• Maintain inventory and records of all parts and end-items used for maintenance work, including those kept in the store.

Documentation & Reporting

• Ensure proper documentation of work records and work orders upon completion.

Ad-Hoc & Support

• Handle any ad-hoc task assigned by the supervisor.

What we're looking for

Educational Qualification

• NITEC/Higher NITEC/Diploma in Building Maintenance/ Electrical / Mechanical / Mechatronic Engineering/ Facility Management

Experience

• 1 year of relevant experience with good knowledge in building mechanical and electrical system *Perform Work at Height (WAH) will be an added advantage

Regulatory Understanding

• Sound knowledge of the Management Corporation Strata Title (MCST) framework and the Building Maintenance & Strata Management Act (BMSMA).

People-Oriented Problem Solver

• Strong interpersonal and communication skills with a solution-oriented mindset; resourceful, independent, and professional in handling challenges and resolving issues effectively.

Why Joins Us

At Chambers, we believe that our people are our greatest asset. We’re committed to creating a positive, rewarding, and growth-oriented work environment where your contributions truly matter. Here’s what you can look forward to when you join our team:

• Competitive Salary Package
• Comprehensive Health Coverage
• Career Growth & Development
• Employee Appreciation
• Generous Leave Benefits
• Supportive Team Culture
• Team Bonding & CSR Participation

At Chambers, we don’t just offer jobs — we build careers. Along with a competitive salary and comprehensive benefits, we provide you with the flexibility, support, and development opportunities to thrive, both professionally and personally.

About us

Chambers Property Management Services Pte Ltd is a leading provider of property management services in Singapore. With over 40 years of experience, we pride ourselves on our commitment to excellence, innovative approach, and exceptional customer service. Our team of dedicated professionals works tirelessly to ensure the properties under our care are well-maintained and exceed the expectations of our clients and residents.

If you are interested in this exciting opportunity, apply now to join our team!

Position Title                :     Technician (Mechanical)

Working Location        :     2A Pioneer Sector 1,

                                              S’pore628415

Working Hours             :     Monday to Saturday                  :     8.00am– 5.45pm

                                              Sunday& Public Holidays          :     Stand By

Salary                             :     $4,800 to $5,000

Duration                        :     Permanent

Official Duty Station    :     Singapore

Responsibilities:

1.      Keep track of project’s progress to ensure it aligns with the planned schedule

2.      Lead one or multiple product development, responsible for mechanical design and overall product specification

3.      Work together among different parties for product development

4.      Provide leadership to maintenance and contractor teams in areas of safety management, work management and discipline.

5.      Provide troubleshooting expertise to resolve plant equipment problems and work with cross functional teams to resolve plant issue and problems where required.

6.      Fulfil all other tasks assigned by manager(s) and supervisor(s).

Requirements:

1.      Diploma/Degree in mechanical engineering or a relevant advanced qualification

2.      Excellent problem-solving skills and able to work hands on.

3.      Effective team player who is creative, meticulous, independent and responsible

4.      Fluency in English. Other languages are a bonus.

5.      Possess flexibility and agility in mindset and working attitude to suit fast-paced working environments.

If interested, please forward resume to: admin@amereq.com.sg

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Overview

We are seeking a hands-on and technically competent Technician to support production, installation, commissioning, testing, and maintenance activities for marine and industrial systems. The successful candidate will work closely with customers, project teams, and internal stakeholders to ensure projects are completed safely, efficiently, and in accordance with quality standards and technical requirements.

Key Responsibilities

Field Service & Technical Support

• Carry out production, servicing, repairs, installation, Factory Acceptance Tests (FAT), field construction activities, plant commissioning, sea trials, and inspections of customer-supplied equipment.
• Perform troubleshooting, maintenance, and technical support for installed systems and equipment.
• Ensure all work is executed in accordance with technical specifications, installation manuals, and acceptance criteria.

Project Execution

• Coordinate site activities and liaise with customers regarding installation requirements, including hot work, welding, carpentry, cabling, and other site-related activities.
• Support project execution by requisitioning required equipment, materials, and tools.
• Assist engineers and project teams in preparing technical drawings, designs, and documentation based on customer requirements.
• Identify and communicate additional customer requirements or project scope changes to management.

Quality, Safety & Compliance

• Maintain accurate project documentation and ensure compliance with ISO standards and company procedures.
• Prepare and adhere to Job Safety Analysis (JSA), Work Method Statements (WMS), Permit-to-Work (PTW), and other safety requirements.
• Identify, document, and report quality issues relating to products, services, or installation activities.
• Ensure proper handling, calibration, and usage of inspection, measuring, and testing equipment.

Continuous Improvement

• Assist in developing and improving field support processes across all product lines.
• Support process improvement initiatives to enhance operational efficiency and service quality.
• Perform additional duties as assigned by Managers and Engineers.

Requirements

Qualifications

• Diploma or Degree in Mechanical Engineering, Electrical Engineering, Marine Engineering, Mechatronics, or a related technical discipline.
• Relevant experience in field service, commissioning, installation, maintenance, or marine/offshore engineering environments is preferred.

Skills & Competencies

• Strong technical troubleshooting and problem-solving abilities.
• Ability to read and interpret engineering drawings and technical documentation.
• Familiarity with FAT, SAT, commissioning, and inspection procedures.
• Knowledge of ISO documentation, Job Safety Analysis (JSA), Work Method Statements (WMS), and Permit-to-Work systems.
• Good communication and customer-facing skills.
• Ability to work independently and as part of a multidisciplinary team.
• Willingness to travel and work offshore, onboard vessels, or at customer sites when required.

Preferred Experience

• Marine, offshore, oil & gas, shipyard, industrial automation, or engineering services experience.
• Experience with sea trials, vessel commissioning, and onboard installation projects.
• Familiarity with electrical, mechanical, hydraulic, or control systems.

What We Offer

• Exposure to challenging marine and industrial projects.
• Opportunities for technical development and career progression.
• Dynamic and hands-on working environment.
• Competitive salary, allowances, and benefits package.

Polymer Technician

• Work Location: Jurong Island, Singapore
• Working Hours: Shift Work
• Monthly Salary: Base up to $2200 + Allowance + AWS + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract
• Pick up from Jurong East/Outram Park MRT

Company Overview
The company emphasizes innovation, quality, and sustainability in its operations, aligning with the company’s global mission to create value for society through science and technology. The company plays a key role in serving regional markets and supporting customers with reliable, high-performance solutions

Responsibility

• Manage daily plant operations and support troubleshooting activities.
• Perform field logging, routine sampling, and plant testing to ensure process efficiency.
• Prepare process equipment for mechanical work in compliance with SOP procedures.
• Carry out loading, unloading, and raw material charging tasks safely and efficiently.
• Operate utility and process plant systems to maintain continuous production.

Requirement

• Minimum Nitec in Chemical Process Engineering or equivalent and recognized by relevant authority
• Minimum 2 year's experience in chemical industry
• 2nd Grade Steam Engineer or Diploma holders with a Boiler Attendance Certificate will have an added advantage
• Experience in forklift, firefighting, confine space or work at heights certificate will have an added advantage.
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

Assist in conducting fault analysis and testing of high voltage (HV) power systems.

Assist in planning manpower for work activities.

Assist in preventive and corrective maintenance of HV power systems.

Comply with Workplace Safety and Health (WSH) policies, procedures and regulations.

Troubleshoots rail power systems faults, restores the rail power systems, and provides technical guidance to the team.

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Position: Test Technician (12 months Contract, Renewable)

Venue: Customer Lab (West)

Working Hours: Office Working Hours

Summary:

Responsible for performing electrical troubleshooting to determine problems in non-functioning test equipment.

Job Responsibilities:

• Execute validation test plan on SSD devices on PC systems.
• Maintain documentation of test results to assist in debugging and modification of software.
• Analyze test results to ensure existing functionality, recommends and implement test coverage improvement actions.
• Perform Failure analysis and work with other function groups to resolve SSD system issues.
• Provide system or SSD analysis support for customer.
• Able to communicate well and work as a team.

Requirements:

• Diploma in Electrical engineering or equivalent related field or experience is preferred
• Experience working with PC/Notebooks/Workstation (PC Setup, PC troubleshooting)
• Working experience in either SSD or HDD industry would be an advantage
• Experience with NVMe storage interface protocols and Windows/Linux Operating Systems
• Knowledge of storage device drivers and/or PCIE chipset register configurations would be beneficial
• Experience using PCIe/NVMe bus analyzers and oscilloscopes would be beneficial
• Conduct inspections and troubleshooting at customer sites.

**Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Test Technician", thank you.

• 5 working days
• Location at Gul Circle
• Transport Provided
• OT + AWS + Variable Bonus + Yearly Increment

Responsibilities:

• Oversees and executes repair, maintenance, and troubleshooting operations in both outdoor and indoor environments.
• When outdoor repairs are not required, tasks are performed within the company workshop.

Qualifications:

• Degree, Diploma, or Certificate in Electrical and Electronic Engineering, with knowledge of AC & DC motors, single-phase and three-phase systems, lead-acid and lithium batteries, electrical control circuits, and hydraulic systems.
• Experience in customer support.
• Strong teamwork and communication skills.
• Possession of a driving license will be an advantage.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Company Profile

Join one of Singapore’s leading academic health systems, recognised for its excellence in healthcare, research, and education. The organisation has been ranked among The Straits Times’ Best Employers and listed in the Top 10 of Singapore’s Leading Employer Awards, reflecting its strong commitment to employee growth and engagement.

With a people-first culture, they are dedicated to staff development and workplace well-being. You can look forward to a meaningful career with an organisation that values innovation, compassion, and excellence in advancing health for the community.

Work location: West (Polyclinic-based) or Central (Hospital-based)

Work hours: 5.5 days work week (Mon – Fri and half Sat), office hours

Responsibilities:

• Ensure medications and supplies are replenished regularly to maintain smooth dispensing processes.
• Pack and dispense prescriptions according to professional guidelines and standards.
• Provide counselling to patients in accordance with good dispensing protocols.
• Understand basic medications and promptly alert pharmacists or prescribers when customers require assistance.
• Report issues, patient concerns, or complaints to supervisors or pharmacists in a timely manner.
• Offer guidance to patients for their medication intake.
• Conduct routine checks and ensure proper functioning of pharmacy equipment (e.g., weighing machines, computers, printers).
• Maintain cleanliness and order in the pharmacy, work areas, and storage rooms.
• Ensure dispensing counters are stocked up with consumables daily.
• Monitor stock levels of medicines, leaflets, and other pharmacy supplies, and replenish as required.
• Regularly check expiry dates and condition of all pharmacy stock.

Key Requirements:

• Min. Diploma in Pharmaceutical Sciences / Graduates of the Certified Pharmacy Technician Course (CPTC)
• Prior work experience as a Pharmacy Technician would be advantageous but not necessary
• Possess excellent customer service skills and has good interpersonal skills
• Good team player and self-motivated.