Total 4,521 job vacancies in Singapore

QualityControl Technician

Our client isa MNC chemical manufacturer company. They are currently seeking for Quality Control Technician.

The role ofthe Quality ControlTechnician includes:

·      Performed analytical testing on raw materials,intermediates, and production samples using laboratory instruments andestablished testing procedures.

·      Prepared and standardized chemical solutions,reagents, and reference materials required for routine quality controlactivities.

·      Monitored test results and promptly communicatedany deviations or out-of-specification findings to production and qualitypersonnel to facilitate timely corrective actions.

·      Evaluated incoming raw materials throughinspection and testing to verify compliance with quality requirements andsupport material release decisions.

·      Executed routine verification, calibration, andperformance checks of laboratory equipment, including balances, pH meters,moisture analyzers, and other analytical instruments.

·      Operated, maintained, and troubleshot laboratoryequipment to ensure reliable performance and minimize operational downtime.

·      Coordinated equipment maintenance activities byreporting issues, tracking service requirements, and supporting repair workwhen necessary.

·      Assisted with the installation, qualification,relocation, and retirement of laboratory instruments and systems.

·      Prepared laboratory equipment for maintenance byimplementing lockout and isolation procedures to ensure safe workingconditions.

·      Participated in emergency preparedness exercisesand supported site safety initiatives.

·      Maintained laboratory housekeeping standards,ensuring work areas remained organized, compliant, and audit-ready.

·      Adhered to company policies related to safety,environmental protection, and quality management systems.

·      Supported continuous improvement efforts aimedat enhancing workplace safety, operational efficiency, product quality, andenvironmental performance.

·      Undertook additional laboratory andquality-related responsibilities as assigned by supervisory or qualitymanagement personnel.

Job Requirement:

·

NITEC or Diploma in Chemical Process Technology with 2 years’ working experience as Laboratory or Chemical Technician in a chemical industry.

Interested candidates, please sendyour detailed resume stating Past Employments, including Reasons of Leaving, LastDrawn Salary for the most recent 2 positions (breakdown of basic salary,allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TOINFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly sendin your latest job resume without your NRIC numbers and other ID numbers.
For job resume(s) that contain NRIC numbers and/ or ID details, it may not beprocessed and your job application may be rejected due to improper submissionof job application details. Please refer to the advisory guidelines on the PDPAfor NRIC numbers and other ID numbers.

By sendingyour job resume to us, it shall be deemed that you have agreed and hereby giveyour consent to MANFIELD in collecting, using and/ or disclosing your personaldata for the purpose of accessing and processing your job application and/ orfor future job opportunities within MANFIELD and/ or with the client(s) ofMANFIELD. If you wish to withdraw your consent, please notify us. Kindly visitour company website for more information on the Privacy Policy.

Quality Technician (Measurement & Testing) - 2nd shift (02:45pm to 11:00pm)

-

We are looking for a detail-oriented QC Technician to join our team, performing precise dimensional inspections, maintaining measurement equipment, and ensuring accurate reporting. If you are detail-oriented and committed to quality excellence, we invite you to be part of our organization.

-

Quality Technician (Measurement & Testing) - 2nd shift (02:45pm to 11:00pm)

-

Key Responsibilities

• Perform various inspection tasks according to the laboratory schedule.

• Perform dimension measurements of three-coordinate, projector, height gauge, etc. according to the requirements of the drawings and issue reports.

• Perform dimension measurements of process start-up parts and process inspection parts according to the requirements of the inspection work instructions and feedback the results.

• Responsible for annual product dimension inspection and reporting.

• Responsible for the implementation of 5S in the measurement room.

• Regularly inspect the measuring equipment and monitor the ambient temperature and humidity as required.

• Promptly escalate any non-conforming items or equipment issues to superiors.

• Summarize and archive various records and reports.

• Participate in the annual review of measuring tools and the provision of MSA data.

• Participate in the acceptance of measurement auxiliary tooling and process inspection tools.

• Perform any additional tasks as assigned by Reporting Manager.

-

Qualifications and Requirements

• Diploma in Mechanical Engineering, Polymer Materials, or a related field.

• Candidates with strong relevant experience may be considered without a formal diploma.

• Minimum 2 years of experience in CMM operation.

• At least 2 years of experience in measuring injection-molded parts.

• Knowledge of GD&T and able to quickly read the drawings, understand the measurement requirements and measure according to the drawings.

• Able to independently write CMM programs and operate three-coordinate measuring machines, and those who know Wenze or Zeiss three-coordinate measuring machines are preferred.

• Able to use Three-coordinate CMM, FARO joint arm measuring instrument, projector, height gauge, roughness meter, micrometer, plug gauge, etc.

• Strong written and verbal communication skills in English.

• Willing to travel overseas for training as required.

• Willing to work flexible shifts as required by operational needs.

-

Benefits:

• Dental insurance

• Health insurance

• Professional development

• Free Parking

-

Experience:

• Operating CMM machines: 2 years (Required)

• measurement/quality inspection: 2 years (Required)

• measuring injection molding part: 2 years (Required)

• CMM programming: 2 years (Required)

-

License/Certification:

• CCC Certification (Required)

• GDAT (Required)

-

Location:

• Singapore 768741 (Required)

-

Work Location: In person

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities:

• Plan and implement the Abnormal Handling (ABS/PAR/IEAR/BPD) system, assisting the FAB reviewing process abnormalities establishing an early warning notification system, with the aim of reducing quality loss and cost for the company and customers, and supervising the effectiveness of system execution.

• Plan and implement the MRB (Material Review Board), assisting the FAB reviewing waived products resulting from process abnormalities, in order to reduce quality loss and cost for the company and customers, and supervising the effectiveness of the system.

• Plan and implement internal audits, assisting the FAB in identifying processes and systems with quality risks, and supervising the effectiveness of improvements to risk processes.

• Plan and implement the MSA (Measurement System Analysis) system, assisting the FAB in performing calibration and capability assessment of measuring instruments to ensure the reliability of measurement values and thus ensure product quality.

• Implement the automotive service package, assisting the FAB in planning executable methods and systems, and auditing and supervising the execution process for automotive products.

Job Requirements:

• Minimum Bachelor degree in engineering (ex. Electronics, Material science, Chemistry, Physics, Statistics, Data Science, Math)

• Candidates with more than 3 years of semiconductor process/quality/integration experience will be considered for a senior role

• Knowledge of problem solving (8D methodology), statistical techniques, Measurement System Analysis(MSA) and planning/project management is an advantage

• Knowledge of ISO9001/ISO/TS16949 or VDA6.3 standards, Lead Auditor qualification and audit handling/experience is preferred

• Collaborate with cross-functional teams to resolve quality issues and customer requirements to drive product quality improvements

• Good communication and negotiation skills, with the ability to collaborate with FAB module, PEI and Customers

Whether you’re looking for your first role or your next career move, UMC is where your future can take shape.

Step into your future with us. Apply Now.

About United Microelectronics Corporation

United Microelectronics Corporation (UMC) is a leading global semiconductor foundry with over 40 years of innovation powering technologies across AI, automotive, consumer electronics, connectivity, and IoT. As one of the industry’s most established players, we enable breakthrough technologies through precision-engineered semiconductor manufacturing for customers across every major sector of the electronics world.

Headquartered in Taiwan, UMC has been present in Singapore since 2004 and continues to invest in local talent, technology, and advanced manufacturing. Our recent Fab expansion reflects our long-term commitment to building Singapore as a key hub for semiconductor innovation, and to creating stable, meaningful careers through innovation, teamwork, and progress.

Join a team that invests in your future from day one. With best-in-class training, hands-on experience and access to cutting-edge tools, UMC equips you to lead tomorrow’s tech landscape, right down to the nanometre.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

About the Role

Be part of a team dedicated to enhancing patient experience and strengthening community engagement across healthcare settings. This role offers the opportunity to make a meaningful impact through patient relations, service recovery, engagement campaigns, and service improvement initiatives. If you are passionate about people, enjoy interacting with diverse stakeholders, and thrive in a fast-paced, service-oriented environment, this is a rewarding opportunity to drive positive change and improve care experiences.

Who Should Apply

• Individuals passionate about improving patient experience and building meaningful community relationships.
• Professionals who enjoy engaging with people, resolving service issues, and driving service excellence initiatives.
• Strong communicators who are proactive, empathetic, and comfortable working in dynamic, fast-paced environments.

Key Responsibilities

• Manage patient feedback and related matters, including investigations, service recovery, follow-up actions, response drafting, and reporting.
• Engage patients to gather feedback and identify opportunities for service improvement and enhanced patient experience.
• Partner with frontline staff and stakeholders to address feedback issues and support service recovery initiatives.
• Facilitate patient engagement activities such as focus group sessions and community outreach initiatives.
• Prepare reports, analyse feedback trends, and share insights with management and relevant departments.
• Build and maintain positive relationships with patients, caregivers, healthcare professionals, and internal teams.
• Identify meaningful stories and contribute content for internal newsletters and engagement communications.
• Drive on-ground campaigns and service improvement initiatives across multiple locations.
• Support ad-hoc projects and departmental initiatives as assigned.

Requirements

• Degree qualification with 2–3 years of experience in healthcare, hospitality, customer relations, or service-related industries.
• Strong verbal and written communication skills in English; ability to converse in local dialects or additional languages is advantageous.
• Customer-centric with strong interpersonal skills and confidence engaging stakeholders at all levels.
• Passionate about community engagement, patient experience, and frontline interaction.
• Comfortable managing campaigns and activities across different locations.
• IT-savvy and proficient in Microsoft Office applications; exposure to SharePoint or related systems is a plus.
• Able to interpret data, analyse trends, and support reporting needs.

Qualified applicants, please send a copy of your resume in MS Word to:

melanietay@recruitexpress.com.sg

or call Melanie at 6736 3280 for further enquiries

All information will be treated with confidentiality and only selected candidates would be notified

Consultant: Melanie Zheng Zhiyuan

Designation: Principal Consultant/Division Manager

CEI Reg No: R1104774

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

Position summary

Act as a technical expert in healthcare quality and regulatory analytics. Combine advanced quantitative analysis, data engineering, and quality system expertise to build stakeholder-specific reporting, develop AI-enabled quality tools, and integrate/manage third-party quality applications to support compliance, continuous improvement, and executive decision-making.

Key responsibilities (primary)

• Perform advanced quantitative data analysis: build statistical and machine learning models for trend detection, root-cause analysis, forecasting, anomaly detection, and risk stratification

• Design, build, and maintain stakeholder-specific dashboards and reports (executive, regulatory) using Power BI tools and data visualization best practices; deliver actionable insights and data storytelling.

• Develop and maintain quality tools and automations using AI/ML/LLM technologies (NLP for document classification/summarization, automated quality checks,

predictive analytics, chat assistants for SOP/QMS guidance).

• Lead integration and lifecycle management of third-party quality software: requirements gathering, vendor coordination, configuration, data integration, testing, release coordination, and ongoing support.

• Utilize current and emerging technologies in evaluating trends to business models and healthcare quality processes

• Develop insights and translate information into actionable initiatives to ensure business outcomes

• Lead and support projects through the application of technical expertise including conceptualization, planning, design, implementation and support of quality assurance processes, systems, and quality technology solutions

• Evaluate and monitor healthcare quality processes and systems to identify areas for continuous improvement and transformation ensuring global excellence

• Initiate and lead the development of reports for key stakeholders, including executive management, using data storytelling and visualization.

• Develop and execute tools to enhance services and deliver training for internal customers or vendors on analytics outputs, tools, and integrated systems.

• Gather and consolidate regulatory and business requirements into convert them into technical specifications and implement monitoring to ensure ongoing compliance with company’s internal policies and relevant regional and local regulations.

• Develop and maintain data validation, models, and metadata; routinely assess model performance and recalibrate as required.

• Lead end-to-end analytics projects: planning, stakeholder alignment, implementation, and post-implementation reviews; document methods and SOPs.

• Support audit readiness and provide analytics-driven evidence for regulatory submissions, inspections, and internal quality reviews.

• Identify opportunities for process improvement and automation in quality workflows, pilot new technologies and scale successful solutions.

Additional responsibilities (as needed)

• Provide subject-matter expertise for cross-functional programs and global initiatives.

• Manage vendor relationships and service-level expectations for third-party tools.

• Participate in career progression and mentoring for junior analysts.

Required skills and experience

• Bachelor's degree in Statistics, Data Science, Biostatistics, Engineering, Computer Science, Information Technology, Healthcare Analytics, or related field (or equivalent experience).

• Strong quantitative and statistical skills; proficiency in data science libraries and tools

• Experience building dashboards and visualizations with tools such as Power BI, Tableau, Looker, or equivalent.

• Hands-on experience integrating and managing third-party quality/GxP systems (MasterControl, Synthesis, ServiceNow) or similar QMS/issue tracking platforms.

• Experience working with cloud platforms, databases (SQL, NoSQL), ETL tools, and APIs.

• Practical experience applying AI/ML and prompt engineering for LLMs to automate quality processes, extract insights from unstructured documents, or create assistant workflows.

• Strong data validation, data modeling, and data governance understanding.

• Excellent communication and data storytelling skills; able to translate technical findings into concise recommendations for executives.

• Experience in a regulated environment (healthcare, life sciences, medical devices, or similar) strongly preferred.

• Demonstrated ability to work cross-functionally and manage vendor/IT relationships.

Preferred

• Certifications in data analytics, machine learning, or quality management.

• Prior experience with global operations or multi-regional regulatory frameworks.

Level expectations and experience guidelines

• 3-4 years relevant experience; independently manages projects and provides expert input, recognized expert, leads complex programs with high autonomy.

Core competencies

• Analytical thinking, accuracy, attention to detail, numerical skills.

• Planning and organizing, project management, stakeholder alignment.

• Statistical knowledge, data modeling, visualization skills, automation

• Vendor and cross-functional collaboration, training and documentation abilities.

Technical requirements

• Proficiency with Microsoft Office and web-based applications.

• Familiarity with automation and orchestration tools; experience deploying AI/ML models into production.

• Language: strong written and spoken English.

Compliance and other

• Ensure ongoing compliance with company processes, regional/local legislation, and external regulations.

• May be required to perform other duties as assigned; role can involve regional and global activities

Working Hours:

Mon to Fri 9am - 6pm ( 1 day hybrid )

Our client is one of the leading players in the medical devices manufacturing sector. Due to business needs, they are now recruiting a Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the east.

The Quality Engineer's responsible is:

• Act as the Quality representative for new product development and sustaining projects within the medical device portfolio.
• Provide quality and compliance support throughout the product development lifecycle, including design changes, design reviews, verification & validation, usability studies, process validation, and labeling activities.
• Lead risk management activities, including Risk Management Plans, Hazard Analysis, Risk/Benefit Assessments, and Design/Process FMEA.
• Partner with cross-functional teams to identify product risks, investigate potential failure modes, and implement effective risk control measures.
• Ensure compliance with ISO 13485, FDA regulations, customer requirements, and applicable quality standards.
• Develop, review, and maintain quality procedures, SOPs, and documentation to support product development and Quality Management System (QMS) requirements.
• Support internal, supplier, and external audits, including the investigation and closure of non-conformities.
• Drive continuous improvement initiatives to enhance product quality, process effectiveness, and QMS compliance.
• Serve as a Quality Subject Matter Expert (SME) and provide guidance to engineering and project teams on quality and regulatory matters.

Job Requirements:

• Degree in life science related discipline
• Min 5 years experience in quality design within medical devices sector
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

The Regional Manager – Clinical Quality & Governance provides expert leadership to elevate quality assurance and clinical governance across Icon’s ASEAN portfolio. This role strengthens decision-making, quality control systems, data analytics, and clinical delivery frameworks to ensure safe, person-centred oncology care.

Responsibilities include:

• Participates in the clinical governance of Icon’s international and local portfolio, through bringing technical knowledge into healthcare systems and risk mitigation design, plans, documents, quality committees, meetings, discussions, communications, and other forms of workforce engagement.
• Monitors, evaluates, and guides alignments to legislative requirements, accreditation standards, organisational standards, and professional standards related to the specialty topic.
• Develops and maintains nursing training programs and competency assessments for the region.
• Collaborates in the development of quality and audit frameworks and actions to be implemented.
• Provides specialist advice to reduce risks to patients, visitors, and staff in the context any form of emergency.

Requirements:

• Qualifications that incorporate the specialty field or extensive speciality field experience (Degree in Nursing).
• Clinical nursing and healthcare management experience.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Our client is one of the leading players in the medical devices manufacturing sector. Due to business needs, they are now recruiting a Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the east.

The Quality Engineer's responsible is:

• Act as the Quality representative for new product development and sustaining projects within the medical device portfolio.
• Provide quality and compliance support throughout the product development lifecycle, including design changes, design reviews, verification & validation, usability studies, process validation, and labeling activities.
• Lead risk management activities, including Risk Management Plans, Hazard Analysis, Risk/Benefit Assessments, and Design/Process FMEA.
• Partner with cross-functional teams to identify product risks, investigate potential failure modes, and implement effective risk control measures.
• Ensure compliance with ISO 13485, FDA regulations, customer requirements, and applicable quality standards.
• Develop, review, and maintain quality procedures, SOPs, and documentation to support product development and Quality Management System (QMS) requirements.
• Support internal, supplier, and external audits, including the investigation and closure of non-conformities.
• Drive continuous improvement initiatives to enhance product quality, process effectiveness, and QMS compliance.
• Serve as a Quality Subject Matter Expert (SME) and provide guidance to engineering and project teams on quality and regulatory matters.

Job Requirements:

• Degree in life science related discipline
• Min 5 years experience in quality design within medical devices sector
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Industry: Freight Forwarding / Logistics

MNC Environment

Permanent role (AWS Guaranteed + Variable Bonus + Overtime + Sign on bonus)

Responsibilities:

• Inspect aircraft spares to ensure quality and compliance
• Verify aircraft spares with appropriate documentation from OEMs, vendors, and suppliers
• Contribute to continuous improvement projects to enhance work areas and procedures
• Facilitate periodic audits conducted by civil aviation authorities and customers
• Maintain shelf-life records for aircraft spares with limited service life
• Monitor and conduct surveillance audits on all activities within the Bonded Stores
• Raise Discrepancy Reports for any issues identified with aircraft spares in the Bonded Stores

Requirements:

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to carlo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA License Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Job Description

• Support GM in driving Integrated Quality initiatives in Singapore facility
• Lead internal audits across products, processes, and procedures
• Drive corrective and preventive actions (CAPA)
• Review and approve project documentation for compliance
• Manage customer-driven change management and qualification activities
• Oversee product acceptance testing
• Develop and implement quality plans and technical documentation
• Establish and maintain quality standards, procedures, and governance systems
• Improve inspection and testing methods to ensure product reliability
• Ensure compliance with quality specifications through corrective actions
• Lead, coach, and develop quality team members
• Drive continuous improvement in productivity, quality, cost, and waste reduction

Job Requirements

• Bachelor’s degree in Electrical, Mechanical, Industrial Engineering, or related field
• 10+ years of experience in Quality and/or Engineering
• At least 5 years in a leadership/management role
• Experience in metrology, inspection techniques, and engineering drawings
• Experience in high-mix, low-volume manufacturing (machining, casting, stamping, fabrication)
• Experience with SAP or similar ERP quality systems
• Strong knowledge of 8D problem-solving methodology

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Jordan Fung Si Jong

EA Personnel Reg No: R23112945

Key Responsibilities

Quality System, ISO & Audit

• Act as Management Representative (MR) forISO 9001 certification.
• Plan, conduct, and coordinate internal quality audits and follow upcorrective and preventive actions.
• Ensure compliance with ISO standards, customer requirements, and regulatoryobligations.
• Maintain, review, and control all quality system documentation, procedures,and records.

Quality Reporting & Data Analysis (Core Focus)

• Prepare and submit weekly and monthlyquality reports to management.
• Track and analyze NCR status, customer return closure cycle time, DPPM,FA/NPI First Pass Yield, and audit findings.
• Monitor operational and quality performance data to identify trends, risks,and improvement opportunities.
• Support management reviews with accurate data and analysis.

FA / NPI & Quality Planning

• Coordinate with Sales, Engineering,and Production on FA and NPI quality requirements.
• Create and maintain Quality Control Plans, Inspection Plans, and CMMinspection programs for new products.
• Monitor FA/NPI cycle time and drive continual improvement activities.

• Participate in quality improvementprojects.

Customer & Supplier Quality Management

• Act as the primary liaison with customersand suppliers on quality-related matters.
• Manage customer feedback, Engineering Change Notices (ECN), andNon-Conformance Reports (NCR).
• Ensure timely corrective actions, closure, and regular status updates.
• Escalate scrap and major quality issues to the Quality Manager immediately.

Calibration & Measurement Control

• Manage calibration of measuringinstruments, equipment, and tools to ensure accuracy and traceability.
• Maintain calibration schedules and records and ensure timely calibration.
• Coordinate with external calibration service providers when required.

Continuous Improvement & Operational Support

• Identify quality risks and process gapsand implement corrective and preventive actions.
• Support continual improvement initiatives and business continuity planning.
• Research and review technical and quality-related data for internal andcustomer needs.
• Track work schedules to meet reporting, audit, and submission deadlines.

Qualifications & Requirements

• Higher Nitec or higher in Precision Engineering, Quality Management, or related field.
• ISO 9001 Internal Auditor certification is preferred.
• Experience acting as Management Representative (MR) is a strong advantage.
• Proven experience in quality reporting, documentation control, and auditmanagement.
• Familiar with FA, NPI, CMM inspection, and manufacturing quality systems.
• Strong analytical, reporting, and communication skills.
• Experience in precision engineering or manufacturing environment preferred.

Responsibilities:

• Maintain accurate and up-to-date ISO 9001, ISO 14001, and ISO 13485 documentation, including Quality Manuals, procedures, work instructions, and records, to ensure system compliance and management review readiness.
• Plan, coordinate, and conduct internal and external audits to ensure organizational readiness for third-party certification, management reviews, and customer audits.
• Collaborate with internal stakeholders to support and participate in customer and supplier audits to ensure compliance requirements are met.
• Review audit findings, develop corrective action plans, and drive continuous improvement initiatives.
• Generate and review supplier quality performance reports, work closely with suppliers to resolve non-conformances, and promote continuous improvement.
• Issue, monitor, and follow up on Supplier Corrective Action Requests (SCAR), ensuring effectiveness and timely closure.
• Support qualification and onboarding of new suppliers to maintain a robust pipeline aligned with production requirements.
• Manage calibration schedules and preventive maintenance programs for equipment to ensure operational reliability and compliance.
• Address quality issues arising from production and customer feedback by working closely with production teams to implement corrective actions and resolve customer complaints with proper documentation.
• Ensure timely closure of Corrective and Preventive Actions (CAPA), non-conformance reports, and customer complaints, and publish quality performance reports.
• Lead Material Review Board (MRB) meetings with cross-functional teams to perform root cause analysis, implement corrective actions, and verify effectiveness.
• Supervise and lead QC inspectors to ensure parts inspection compliance with engineering drawings and quality standards.

Qualifications:

• Diploma in Quality Management, Engineering, Manufacturing, or a related field.
• Min 3 years of relevant experience in quality or manufacturing environments, with exposure to audits and documentation.
• Basic understanding of supplier management and quality coordination.
• Familiarity with commonly used quality management standards (e.g. ISO systems).
• Working knowledge of quality tools and process control methods.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

The Laboratory Technician conducts laboratory tests and analyses following established procedures and safety protocols. Supporting quality control and production, this role will be working 12 hours day and night shifts, involves in sample analysis, data collection, equipment maintenance, and ensuring reliable results at the EVAL Manufacturing site, starting in late 2026. The technician will be trained in future production roles to support safe, efficient operations. Reporting to the Shift Supervisor, the technician will receive training from Kuraray members and assist with laboratory equipment commissioning, ensuring a smooth launch of the new EVAL Quality Control Laboratory.

Responsibilities:

·      Conducting laboratory tests and analyzing in-process samples using specified instruments and equipment.

·      Preparation of chemical reagents.

·      Timely communication of analysis results to the Production Supervisor and Day QC team in the event of any abnormalities, ensuring swift remedial action if required

·      Conducting incoming inspection of chemicals (Methanol, NaOH, Azobis 2 4-dimehyl valeronitrile catalyst, VAM Acetic Acid) and advises Supervisor of material acceptance.

·      Conduct equipment daily validation (eg Analytical balance standard weight check, ph meter calibration and buffer check, KF standardization) and run with control sample for equipment performance check. Operate and calibrate laboratory instruments and equipment.

·      Carry out basic instrumentation and equipment functions and conduct maintenance, gas cylinder changeout and troubleshooting,where necessary.

·      Highlight Maintenance request notifications need to Supervision and QC members.

·      Assist in commissioning and de-commissioning of laboratory equipment.##_msocom_3

·      Assist in preparing lab equipment for maintenance and ensure equipment energy sources are isolated.

·      Participate in emergency response drills.

·      Maintain clean, organized, and safe laboratory conditions as per 5S standard.

·      Understand and comply with departmental Safety and Environmental guidelines, policies, and procedures.

·      Contribute to the improvement of the Safety, Health, Environment and Quality Programs.

·      Carry out any other tasks as assigned by Supervisor or QC personnel.

Qualifications:

• NITEC or Diploma in Chemical Process Technology.
• At least 5 years’ working experience as Laboratory or Chemical Technician in chemical industry.

As a QA Executive for Amber, you will play a key role in ensuring the overall quality and performance of the product NextGen Management Systems as well as client websites/applications. You will be responsible for designing and executing test plans, troubleshooting issues, and collaborating with cross-functional teams to deliver a seamless and reliable platform for our users. You will ensure that the platform meets high standards of functionality, usability, and security, while continuously striving to enhance the overall user experience.

Key Responsibilities:

• Test Planning & Execution:Develop, document, and execute detailed test plans and test cases based on product requirements.
  Perform manual and automated testing to identify and troubleshoot software defects, ensuring the product meets all quality standards.
  
• Bug Tracking & Reporting:Identify, document, and track software defects using bug-tracking tools.
  Collaborate with developers to communicate issues, provide details for resolution, and verify bug fixes.
  
• Regression & Performance Testing:Conduct regression testing to ensure previous functionality remains intact after new releases or updates.
  Execute performance, load, and stress testing to ensure the platform performs optimally under varying conditions.
  
• Collaboration:Work closely with developers, product managers, and UX/UI teams to understand requirements and participate in sprint planning meetings.
  Provide insights and feedback on user experience, and recommend improvements to enhance product functionality and usability.
  
• Documentation:Create and maintain detailed documentation for test plans, test scripts, and results.
  Prepare and present QA reports to management and stakeholders.
  
• Continuous Improvement:Stay updated on the latest testing methodologies and tools to continuously improve QA processes and tools.
  Identify opportunities for automation to improve efficiency in testing.
  

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 2+ years of experience in Quality Assurance, preferably in software testing or SaaS-based products.
• Strong knowledge of QA methodologies, tools, and processes.
• Experience in manual and automated testing tools such as Selenium, JIRA, or similar.
• Familiarity with Agile and Scrum methodologies.
• Basic understanding of programming languages like Java, Python, or SQL.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills with the ability to work in a fast-paced environment.

Preferred Skills:

• Experience with testing in web applications.
• Familiarity with API testing tools like Postman.
• Knowledge of version control systems like Git.
• Basic understanding of security and compliance testing for web applications.

Job Responsibilities

An Incoming Quality Control (IQC) Inspector verifies that raw materials, components, or chemicals from suppliers meet quality standards before they enter the production line, preventing defects. Key duties include sampling, conducting visual/dimensional inspections, testing materials, and documenting results.

• Inspection & Testing: Perform AQL (Acceptable Quality Level) inspections, visual checks, and dimensional checks on incoming raw materials. If required, may need to operate AOI equipment for 100% inspection on incoming core boards.
• Documentation: Record inspection results, maintain inspection logs, and generate reports, including non-conformance reports for failed materials.
• Non-Conforming Material Control: Identify, segregate, and place defective materials on hold to prevent use.
• Supplier Quality: Work with procurement and engineering teams to address quality issues with suppliers.
• Sampling: Perform aseptic sampling (if required) or standard sample testing based on inspection procedures if required.

Job Requirements

Customer support:

• In the event of receiving a complaint or returns due to a quality defect at a customer and contribute to an 8D reports to be submitted to the customer.
• Aggregate process control data according to a customer request and prepare its report.
• Additionally, support compiling a report on what is requested by a customer.

Process improvement:

• Monitor supplier’s critical parameters using SPC software by inputting critical values received from CoA and CoC.

Professional qualifications:

• Holding a ITE or equivalent in engineering, manufacturing technology or associated fields.
• It is favorable (promising) if having experiences of similar roles in incoming quality inspection environment at a semiconductor related manufacturer.
• Having experiences of working as a IQC inspector at a manufacturing plant is favorable.

Expertise and skills:

• Proficient in MS Office (Word, Excel, PowerPoint) for document creation.
• A basic knowledge of quality management systems (IATF, ISO, etc.).
• A basic knowledge of environmental, health and safety (EHS) management systems.
• A basic knowledge with chemical regulations (laws, SDS, GHS).

Competency:

• Able to listen effectively and to act appropriately in response to instructions given.
• Able to report necessary information, such as problems and production progress, to managers.
• Capable of making recommendations for improvement plan to reporting manager.

Attributes:

• Higher interpersonal ability and communication skills are essential for working with multiple departments and suppliers.
• A cooperative personality and good attitude are preferred.

Others:

• Normally, work the day shift on weekdays, but may be required to work on holidays as directed by your supervisor.
• May be required to work in a clean room environment.

Company Profile

We are a group of companies specializing in Workplace Hygiene and Facilities Support, serving clients across industrial, commercial, and office environments, as well as large building complexes.

As we expand into the Indoor Air Quality (IAQ) sector, our focus at hygION AIR is to deliver engineered air quality solutions built on science,precision, and purpose.

At hygION AIR, we are committed to creating healthier, safer, and moreefficient environments through advanced air quality testing, monitoring, andadvisory services.

We are seeking passionate individuals who are ready to grow with us and make a meaningful impactin the field of environmental and air quality solutions.

Our client is one of the leading players in the medical devices manufacturing sector. Due to business needs, they are now recruiting a Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the east.

The Quality Engineer's responsible is:

• Act as the Quality representative for new product development and sustaining projects within the medical device portfolio.
• Provide quality and compliance support throughout the product development lifecycle, including design changes, design reviews, verification & validation, usability studies, process validation, and labeling activities.
• Lead risk management activities, including Risk Management Plans, Hazard Analysis, Risk/Benefit Assessments, and Design/Process FMEA.
• Partner with cross-functional teams to identify product risks, investigate potential failure modes, and implement effective risk control measures.
• Ensure compliance with ISO 13485, FDA regulations, customer requirements, and applicable quality standards.
• Develop, review, and maintain quality procedures, SOPs, and documentation to support product development and Quality Management System (QMS) requirements.
• Support internal, supplier, and external audits, including the investigation and closure of non-conformities.
• Drive continuous improvement initiatives to enhance product quality, process effectiveness, and QMS compliance.
• Serve as a Quality Subject Matter Expert (SME) and provide guidance to engineering and project teams on quality and regulatory matters.

Job Requirements:

• Degree in life science related discipline
• Min 5 years experience in quality design within medical devices sector
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Basic UP$2800 + Transport allowance + OT

• Company located at Tuas

• Monday – Friday: 8am – 5pm,Saturday: 8am – 12pm

• Well Established Oil &Gas Manufacturing Company

• Variable Bonus +Excellent Welfare & Benefits

Job Scope

• Ensure incoming and in-process inspections are carried out timely and quality inspection reports are filled up accordingly.
• Review quality inspection reports from external providers and perform verification of the results.
• Updating Senior Quality Engineer and QHSE Manager/ MR on the inspection status and update in Navision.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Ensure that operations within his area of responsibilities are in accordance with the QHSE policy and objectives.
• Perform other assignment and duties as and when required.

Requirement

• O Level or NITEC in relevant discipline
• 1 -3 years of relevant experience in Quality Inspector

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Client introduction

Our client is an established fintech headquartered in Singapore, operating across payments and foreign exchange with a footprint spanning Asia and beyond, including a significant client base in Greater China. As the business scales towards its next stage of growth, they are building out the senior layer of their reliability function.

They are hiring a newly created Lead Site Reliability Engineer (Quality Assurance) sits within the SRE team as a key technical hire and co-lead with the Head of SRE.

Job responsibilities

• Own production reliability across the FX and payments platforms - monitoring, observability, alerting, and the definition and tracking of SLIs and SLOs.
• Lead incident response end to end, including war rooms, post-mortems, root-cause analysis and the upkeep of operational runbooks.
• Strengthen quality assurance across the platform - improving test coverage, release sign-off standards, and modernising legacy test automation toward more automated and AI-assisted workflows.
• Support client API integration from sandbox to production, including liquidity provider onboarding and conformance testing.
• Act as the technical escalation bridge between clients, internal users and engineering, supporting China-based clients directly on production and integration issues.
• Lead business continuity and disaster recovery testing, including failover, recovery and audit evidence preparation.
• Contribute to DevOps and tooling improvements across reliability, testing and support.
• Coach and uplift a team of junior SRE and QA engineers, setting standards and mentoring on best practice as the function matures.

Job requirements

• At least 6 years of experience in site reliability, production support, platform engineering or technical operations, ideally within fintech, payments, FX, trading systems or another high-availability environment.
• Strong hands-on troubleshooting across production systems, logs, APIs and application behaviour.
• Hands-on quality assurance exposure - test automation, release support or regression testing - as the role spans both reliability and quality.
• Working knowledge of API integration and comfort in client-facing or client-support situations; sandbox-to-production experience is an advantage.
• Solid fundamentals across cloud and containers (AWS, Docker, Kubernetes), monitoring and observability tooling (Grafana, Prometheus, OpenSearch, CloudWatch), and scripting (Python, Java, Bash).
• People management or team-lead experience is necessary.
• Sound grounding in incident management, RCA and BCP/DR practice.
• Professional spoken and written Mandarin proficiency is required to communicate directly with China-based clients and stakeholders, support production issues, and manage API integration activities.
• Suited to someone hands-on today who wants to grow into a broader leadership role. Candidates requiring relocation to Singapore are welcome to apply. Relocation expenses will not be provided for this position.

Why you should join them

• A newly created, high-visibility role as second-in-command within the reliability function, with a genuine path to grow into a deputy or co-leadership position through succession planning.
• Direct exposure to senior engineering leadership, reporting to the Head of Engineering and working alongside the infrastructure team.
• Broad ownership across reliability, quality, client integration and incident management, with room to shape how these run rather than inherit a fixed playbook.
• A modern technical environment with real appetite for AI-assisted tooling across testing, RCA and support, plus a hybrid working arrangement.

JL
Reg. No. R1766249
BeathChapman Pte Ltd
Licence no. 16S8112