SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We’re searching for an Associate Equipment Engineer to be part of our Thin Film CVD department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• To assist CVD equipment engineers to sustain equipment performance and perform schedule & ad hoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assisting new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More About You:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment preferred
• Fresh Diploma graduates with keen interests are welcome to apply, training will be provided
• Non-diploma holders with 3 years’ direct experience in CVD equipment can apply
• Basic engineering knowledge
• Some knowledge of Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

·      Tolead the quality improvements through working with all relevant department andsupplier on the Kaizen activities.

·      To understand customer manufacturing quality requirement & align with the business agreement so as to work effectively with all suppliers to achieve KPI target for the line rejection.

·      Perform analysis on internal defects and drive improvements from relevant departments to achieve quality KPI.

·      To support Quality System Lead in ISO implementation for the company

·      To collaborate with internal team and provide support to Quality System Lead in all certifications requirement for the products as stated by customer

Requirements

·       Degree/ Diploma in Engineering with at least 3 years of relevant working experience in Manufacturing

·       Ability to work with the customer, HQ /factory, Peers / Subordinate, and Superiors

·       Strong problem-solving and interpersonal skills

·       Ability to work with minimal supervision

·       Able to handle customer complaint and work well with internal & external department to resolve quality issue

·       Able to provide constructive solution /advice to the team

·       Good knowledge in ISO management and customer audit

To find out more about this opportunity, please contact Lionel Liew atlionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S)Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No: R1330693

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm 
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

We are hiring Module Engineers (Process / Equipment) to support advanced semiconductor wafer fabrication in a high-volume manufacturing environment. This role focuses on Diffusion, Ion Implantation, Etch, or Thin Film deposition processes, ensuring stable tool performance, high yield, and continuous process improvement.

This is an excellent opportunity for engineers with semiconductor manufacturing, wafer fabrication, process engineering, or equipment engineering experience to grow in a leading global semiconductor company.

Key Responsibilities

• Support daily semiconductor wafer fabrication operations within assigned module (Diffusion / Implant / Etch / Thin Film)

• Perform process monitoring, equipment troubleshooting, and root cause analysis (RCA)

• Drive yield improvement, defect reduction, and process optimization initiatives

• Execute statistical process control (SPC), data analysis, and process capability monitoring

• Support equipment qualification, preventive maintenance (PM), and tool recovery

• Collaborate with Process Integration, Manufacturing, and Equipment Engineering teams

• Participate in continuous improvement (CI), lean manufacturing, and cost reduction projects

• Ensure compliance with safety, cleanroom protocol, and semiconductor quality standards

Requirements:

• Degree / Diploma in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Materials Science, Physics, or related discipline

• Experience in semiconductor manufacturing / wafer fabrication environment preferred

• Exposure to Diffusion, Ion Implant, Etch, or Thin Film processes is highly advantageous

• Knowledge of SPC, DOE, 8D, RCA, or yield management tools

• Strong analytical, troubleshooting, and problem-solving skills

• Familiar with cleanroom operations and high-volume manufacturing (HVM) environment

• Good team player with strong communication skills

• Willing to work in shift rotation (if required)

How to apply: Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Engineer", thank you.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products, solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3 focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027. Further information can be found at www.st.com

YOUR ROLE 

1. Equipment Development:

• Assist in the development and optimization of lithography equipment for semiconductor manufacturing.
• Analyze data to identify equipment improvements and implement solutions.

 2. Equipment Monitoring and Control:

• Monitor and control lithography equipment to ensure consistent and high-quality output.
• Troubleshoot equipment issues and implement corrective actions.

 3. Documentation and Reporting:

• Maintain detailed documentation of process parameters, experiments, and results.
• Prepare technical reports and presentations to communicate findings and recommendations to the engineering team.
• Update equipment documentation and standard operating procedures (SOPs) as needed.

4. Collaboration and Teamwork:

• Work closely with cross-functional teams, including process, production, and quality assurance, to ensure seamless integration of lithography processes.
• Participate in team meetings and contribute to problem-solving discussions.
• Provide support to shift engineers and shift technicians as required.

 5. Continuous Improvement:

• Participate in continuous improvement initiatives to enhance process efficiency, yield, and quality.
• Identify opportunities for equipment automation and implement solutions.

YOUR SKILLS & EXPERIENCES

• Bachelor’s degree in Engineering or a related technical field
• Minimum 2 years of relevant experience in semiconductor equipment engineer, photolithography, or related.
• Hands on experience with EVG Bonder/Debonder / EKRA screen printer equipment.
• Understanding the basics of lithography principle and semiconductor process.  
• Knowledge of data analysis and statical process control.
• Good communication and teamwork skills.
• Work independence and able to do multitask effectively.  

Job Summary 

We are looking for a QC Equipment Qualification Specialist to support qualification, lifecycle management, and decommissioning activities for Quality Control laboratory equipment within a GMP-regulated manufacturing environment. 

This role will support the execution and coordination of qualification activities, change control, validation documentation, and equipment lifecycle compliance. The successful candidate will work closely with QC, Validation, Engineering, Quality Assurance, and external vendors to ensure laboratory equipment is qualified, documented, and maintained in accordance with site and regulatory requirements. 

Your Missions 

• Support qualification activities for QC laboratory equipment in accordance with GMP, validation lifecycle, and change control requirements. 

• Coordinate and execute equipment qualification activities including IQ, OQ, and PQ where applicable. 

• Support decommissioning activities for QC laboratory equipment following approved procedures and compliance requirements. 

• Assist in defining project plans, timelines, documentation needs, and coordination activities for qualification and decommissioning projects. 

• Prepare, review, and maintain qualification protocols, reports, SOPs, risk assessments, and training materials. 

• Support deviations, investigations, CAPA, and change control activities related to laboratory equipment and qualification processes. 

• Review qualification and validation documentation to ensure completeness, traceability, and compliance with GMP and site quality expectations. 

• Collaborate with QC, Validation, Engineering, Quality Assurance, and vendors to ensure timely execution of project activities. 

• Ensure proper documentation practices, data integrity, and compliance standards are followed for laboratory equipment systems. 

• Support equipment integration activities where applicable, such as LabX connectivity or related laboratory data systems. 

• Track action items, project milestones, risks, and implementation progress to support delivery within agreed timelines. 

Your Profile 

• Bachelor’s degree in Engineering, Life Sciences, Biotechnology, Pharmaceutical Sciences, Chemistry, or a related discipline. 

• 5–8 years of experience in qualification, validation, commissioning, or lifecycle management within GMP-regulated manufacturing or laboratory environments. 

• Hands-on exposure to QC laboratory equipment qualification and validation activities. 

• Good understanding of GMP documentation, validation lifecycle, change control, deviation, and CAPA processes. 

• Experience preparing or reviewing qualification protocols, reports, SOPs, risk assessments, or validation documentation. 

• Familiarity with analytical or laboratory equipment such as continuous flow analysers, nitrogen analysers, TOC systems, gas generators, analytical balances, microbalances, or similar laboratory instrumentation would be an advantage. 

• Exposure to laboratory system integration platforms such as LabX or related laboratory software systems is preferred. 

• Strong documentation, coordination, and stakeholder communication skills. 

• Detail-oriented, organized, and comfortable working within structured quality and compliance environments. 

• Able to manage multiple tasks and timelines within project-based environments. 

What We Offer 

• An international community bringing together 110+ different nationalities. 

• An environment where trust has a central place: 70% of our key leaders started their careers at the first level of responsibilities. 

• A robust training system with our internal Academy and 250+ available modules. 

• A vibrant workplace that frequently gathers for internal events, afterworks, and team buildings. 

• Strong commitments to CSR, notably through participation in our WeCare Together program. 

Job Description:

• In charge of supporting the team through accurate business reporting, data governance, and cross‑functional project execution.
• Responsible for regular operational reporting, ensuring data accuracy in the ERP system
• In charge of providing insightful analysis to management that supports decision‑making, sales support operations, and ROAIC improvement.
• In charge of preparing, analysing, and presenting monthly/ weekly operational reports.
• Responsible in ensuring proper, accurate, and timely data update in the ERP system
• In charge of identifying data discrepancies and drive corrective actions with relevant stakeholders
• Present reports, analysis, and insights to management during face‑to‑face meetings
• Establish and maintain a data management framework which consist of Data ownership and accountability, standard definitions and reporting logic as well as regular data validation and controls
• Lead multiple cross‑functional programs and projects across departments
• Ensure projects are delivered on time, within scope, and aligned with business objectives
• Project planning and coordination, providing regular progress tracking
• Structured project update reporting to project sponsors and management

Job Requirement:

• Minimum Degree in Business or related field
• Minimum 3 years of working experience in business operation in engineering industry
• Experience in ERP
• Proficiency in Excel and data analysis tools

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Repair of non-motorised equipment such as maintenance steps, hydraulic carts, nitrogen carts, etc.
• Perform preventive and corrective maintenance in accordance with approved documents
• Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work
• Ensure equipment is in working/serviceable condition before releasing to user
• Able to read and understand engineering schematic drawings and manuals
• Other duties as assigned

Job requirement

• Candidate must possess minimum Professional Certificate/NiTEC in Engineering (Mechanical/Automotive) or equivalent
• Preferably 1-year of working experience in repairing of mechanical and/or hydraulic equipment
• Good Hands-on skills

Responsibilities

• In charge of perform regular checks in inventory software system to ensure inventories are in place
• responsible in perform regular repairs and maintenance of yard and workshop tools and equipment
• Maintenance of the tool room through 5S initiatives and good housekeeping practices

Requirement

• Min Nitec in Engineering and relevant
• Min 1 year of working experience in tooling and vehicle maintenance with experience in inventory system and Microsoft Office suite
• Class 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Tasked with turning foundational datasets into actionable sales strategies. This involves managing promotional planning, lead generation, and sales enablement while utilizing software like Microsoft, SAP, and company systems
• Build, maintain, and analyze datasets to guide sales directions and map out market development.
• Lead B2B lead generation, promotional planning, and sales enablement campaigns to drive measurable growth.
• Proactively propose strategies to improve sales performance and investigate the "why" behind data outcomes.
• Utilize, build, and optimize reporting tools to streamline marketing and sales operations.

Requirements:

• Min Degree in Marketing/ Business/Engineering or related field
• Min 3 years of relevant experience in doing sales in Equipment/ Machinery Industry
• Must possess proficiencies in Excel and PBI/Tableau

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

QC Validation Specialist (Equipment Qualification/ Pharma/ Contract)

Duration: 6 months

Location: Tuas   

Salary : Up to $10,000 depending on experience

Our client is a US healthcare and a leading global biopharmaceutical company. They have more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities

• Perform/review system qualification, requalification, relocation, decommissioning and retirement for laboratory equipment in accordance with approved procedures and standard lead time.
• Assume role of Subject-Matter-Expert of laboratory system lifecycle, collaborates closely with cross-functional teams and above-site functions. This includes initiating alignments proactively, sharing expertise, and providing input to ensure alignment and consistency across the organization.
• Author/review Quality Notifications and Test Exception Reports, lead root cause analysis and ensure effective implementation of related actions within the agreed timeframe. 
• Conduct troubleshooting of laboratory system lifecycle, identifying and resolving any issues that may impact the business/work efficiency and compliance.
• Identify opportunities and propose solutions to improve efficiency and compliance in processes, standards, and best practices within the team.
• Provide leadership, expert guidance and support to team members, acting as a go-to resource for problem-solving and decision-making.   
• Provide skills training to other team members, ensuring they have the necessary knowledge and competencies to perform their duties effectively.
• Any other duties as assigned by reporting manager.

Requirements:

• Diploma or bachelor’s degree in chemical engineering or any other relevant engineering field
• At least 5 years of experience in qualification, requalification, relocation, decommissioning and retirement of Good Manufacturing Practice (GMP) Lab equipment (not limited to Ultraviolet–Visible (UV-Vis) Spectrometer, Total Organic Carbon (TOC) Analyzer, Microplate Reader, Liquid Particle Counter, Capillary Electrophoresis (CE), High-Performance Liquid Chromatography (HPLC), Analytical Balances, Incubators, Particle Counters)
• Experience in GMP environment within the pharmaceutical/chemical manufacturing.

Lim Pey Chyi – Apple.lim@manpower.com.sg

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

Key Responsibilities

1. Equipment Ownership & Performance

• Act as equipment owner for a defined set of CMP tools 
• Monitor OEE and uptime, define and drive actions to improve them.
• Analyze equipment alarms, and chronic issues; implement robust corrective and preventive actions.

2. Maintenance & Troubleshooting

• Define and optimize PM (Preventive Maintenance) plans and spare parts strategy.
• Support technicians in complex troubleshooting: mechanical, electrical, pneumatic, vacuum, robotics and software.
• Escalate and coordinate with equipment vendors (remote and on-site) for advanced technical support.

3. New Equipment Introduction & Upgrades

• Participate in specification, selection, installation and qualification of new CMP tools.
• Lead or support process and equipment release to production, including capability and stability checks.
• Manage equipment upgrades, retrofits, and obsolescence mitigation projects.

4. Process & Quality Support

• Work with process engineers to ensure that equipment performance meets process requirements 
• Support yield, quality, and reliability investigations from an equipment perspective
• Ensure equipment operation complies with quality systems (e.g. IATF 16949, ISO 9001, automotive standards where applicable).

5. Continuous Improvement & Industrial Efficiency

• Analyze data and KPIs; identify bottlenecks and chronic losses.
• Lead or participate in Lean/Six sigma/SMED activities for cycle time, cost, energy, and throughput improvements.
• Drive standardization of settings, PM procedures, troubleshooting guides, and documentation.

6. Safety, Environment & Compliance

• Ensure strict adherence to EHS rules (chemicals, slurry, gases, high voltage, vacuum, cleanroom, LOTO).
• Participate in risk assessments, FMEA, and implementation of safety interlocks and procedures.
• Maintain compliance with environmental and regulatory requirements (e.g. waste handling, emissions).

7. Documentation, Training & Knowledge Management

• Create and maintain equipment documentation: procedures, checklists, work instructions, recovery plans.
• Train and coach maintenance technicians on equipment usage and basic troubleshooting.
• Contribute to knowledge base and share best practices across shifts and sites.

Job Requirements:

• A Bachelor’s Degree in Mechanical, Mechatronics, Electrical & Electronics Engineering, Materials Science Engineering, Chemical Engineering or equivalent.
• Min 5 years of relevant work experience in CMP area, familiar with CMP Equipment (AMAT MirraMesa, Ebara F-REX200, Ontrak, etc.).
• Strong troubleshooting skills and deep technical knowledge.
• Knowledge of SPC, FMEA, 8D methodologies.
• Excellent communication, cross-functional collaboration abilities and written skills.
• Positive learning attitude with strong sense of responsibility.
• Strong ownership, a commitment and flexibility to support operational priorities
• Able to adapt in a fast paced environment and work under pressure.

Job Description

• Industry/ Organization Type: Industrial Pump and Equipment Distributor
• Position Title: Sales Engineer (Industrial Pumps and Equipment)
• Working Location: Central – 7 minutes walking distance from Farrer Park MRT
• Working Hours: 5 days (Mon – Fri, 8.30 am-5.30 pm) Sat half day once a month
• Salary Package: Basic Salary + Transport Allowance + Phone Allowance +AWS + VB
• Duration: Permanent Role

Key Responsibilities

• Manage and expand existing customer accounts
• Respond to sales inquiries, provide sales support, and handle site-related matters
• Visit customers at their workplace or office
• Assist in monitoring customer payments
• Perform any other duties assigned

APPLY NOW!!!

• Professional Certificate / NiTEC, or Diploma in Mechanical / Electrical Engineering, Mechatronics, or a related field.
• At least 2 years of experience in a relevant field, with sales development experience considered a plus.
• Good communication, presentation, and negotiation abilities.
• Able to work independently and as part of a team with a customer-focused attitude.
• Self-motivated with a proactive approach to tasks and responsibilities.
• Possess a valid Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84274 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Equipment Supplier
• Position Title: Business Development / Sales Engineer (Semiconductor Equipment)
• Working Location: West – Jurong East (Walking distance to the company from MRT)
• Working Hours: 5 days / Monday to Friday, 9am-6pm
• Salary Package: Up to SGD 5000 + Monthly Commission + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Drive sales of semiconductor equipment to meet and exceed sales targets
• Collaborate with customers to evaluate systems, parts, and materials
• Manage customer inquiries, RFQs, sales proposals, and quotation processes
• Build and maintain strong customer relationships, understanding their needs and delivering tailored solutions to ensure long-term partnerships
• Coordinate with customers and R&D on sales activities, including presentations, quotations, specification confirmations, negotiations, commissioning/acceptance, and post-sales support
• Lead sales negotiations and ensure successful deal closures
• Implement strategies to expand market share for assigned products and services
• Prepare and submit sales reports for internal purposes
• Respond promptly and efficiently to customer queries
• Undertake any additional assignments as directed by management

APPLY NOW!!!

• Min. Diploma in Engineering
• Proficient in Microsoft Office
• Min. 1 year of sales experience, preferably experience in the semiconductor industry
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76685 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Lab Equipment Technician to be part of their team for ongoing transformation projects.

This is a 1 Year contract (Convertible) role. They are located at Buona Vista – Walking distance from the MRT station.

5 days work week - Monday to Friday (8.30 am to 5.30pm)

Duties

• Conduct laboratory testing and perform assigned automated test methods accurately and on time.
• Support equipment preventive maintenance (PM), basic troubleshooting, calibration, and installation.
• Maintain accurate records for equipment usage, servicing, and testing documentation.
• Coordinate with internal teams and external vendors for equipment maintenance and technical support.
• Ensure compliance with safety, quality, and laboratory operating procedures at all times.

Requirements

• Diploma in Science, Engineering, or related field.
• 1–2 years of laboratory or technical experience preferred.
• Basic knowledge of equipment calibration, preventive maintenance, and troubleshooting.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: tc1@recruitpedia.sg

Attention to: Alethea

EA License No: 19C9682
Reg No: R21101676
Ng Zhi Qing Alethea

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Technical Sales Engineer (Ultra High Purity)

We are a global engineering company supporting the semiconductor industry with Ultra High Purity (UHP) equipment solutions. As part of our continued expansion in the semiconductor sector, we are looking for driven individuals to help grow our regional and international business footprint.

• S$4,000 – S$6,000 + Variable Bonus
• Dynamic Hunter-Farmer (50/50) business development role
• 10 Ubi Crescent
• Monday to Friday, 9:00AM – 6:00PM
• Exposure to global semiconductor customers and EPC networks
• Opportunities to attend industry exhibitions and expand market reach
• Strong career growth in a fast-expanding technical sales environment

Job Responsibilities

As a Business Development Engineer, you will play a key role in driving growth and strengthening customer relationships within the semiconductor UHP sector.

Your responsibilities include:

Business Development & Sales Growth

• Maintain and strengthen relationships with existing customers
• Identify and develop new business opportunities within assigned territories
• Proactively engage prospective customers to generate new sales opportunities
• Attend exhibitions and industry events to build market presence

Technical & Commercial Engagement

• Lead technical discussions with customers and support product definition activities
• Monitor project tenders and participate in commercial negotiations
• Analyse market opportunities and competitive landscape
• Provide feedback to regional and HQ teams for product and business strategy development

Customer & Project Coordination

• Coordinate with customers, internal teams, and factories to ensure smooth execution
• Ensure high customer satisfaction in quality, delivery, and after-sales support
• Act as the key liaison between technical and commercial stakeholders

Requirements

• Degree in Engineering or related discipline
• 2–3 years of experience in UHP (Ultra High Purity) applications within the semiconductor industry
• Strong sales-driven mindset with proven business development experience
• Established network with semiconductor EPC companies and end users preferred

Join Our Team

If you are a motivated and commercially driven engineer looking to grow in the semiconductor UHP industry, we welcome you to join our expanding team.

Salary: Basic Up to $2800+ICT                                                       

Working Days & Hours: 4-3-4-3 Rotating (12 Day/Night Shift)

Location: Woodlands / Woodlands North

Key Duties:

• Carry out troubleshooting and repairs of equipment to reduce downtime and ensure smooth operations

• Conduct preventive maintenance, calibrations, minor repairs, and assist in troubleshooting to minimize downtime.

• Maintain accurate production logs and comply with cleanroom procedures at all times.

Requirements:

• Minimum NITEC in any Engineering field, or equivalent certification.

• Comfortable wearing clean room attire.

• Prior Experience in the Wafer Fabrication field are highly advantageous.

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

CCTV Technician x 2

• Salary: $ 2,450 - $ 3,200
• Address: 3 Bus stop from Tiong Bahru MRT
• Working Hours: Monday - Friday / 8.45am to 6pm
• Alternate Saturday / 8.45am to 1.15pm

 
Job Requirements:

• ITE / Diploma graduate
• Class 3 (Manual or Auto) License

 Job Description:

• Technical knowledge for cabling & tracing work (UTP)  
• Skillset in CCTV / Door Access / Telephony / WIFI setup
• Able to handle customer / basic project coordination
• Basic Programming / IT for above product in item 3 added advantages
• Ad-hoc duties as per assign
   

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Lab Equipment Technician to be part of their team for ongoing transformation projects.

This is a 1 Year contract (Convertible) role. They are located at Buona Vista – Walking distance from the MRT station.

5 days work week - Monday to Friday (8.30 am to 5.30pm)

Duties

• Conduct laboratory testing and perform assigned automated test methods accurately and on time.
• Support equipment preventive maintenance (PM), basic troubleshooting, calibration, and installation.
• Maintain accurate records for equipment usage, servicing, and testing documentation.
• Coordinate with internal teams and external vendors for equipment maintenance and technical support.
• Ensure compliance with safety, quality, and laboratory operating procedures at all times.

Requirements

• Diploma in Science, Engineering, or related field.
• 1–2 years of laboratory or technical experience preferred.
• Basic knowledge of equipment calibration, preventive maintenance, and troubleshooting.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: tc1@recruitpedia.sg

Attention to: Alethea

EA License No: 19C9682
Reg No: R21101676
Ng Zhi Qing Alethea

Job Responsibilities:

· Troubleshoot and repair of hydraulic and electrical system for Aircraft Tow Tractors, GPU (Ground Power Unit), ACU

(Air Conditioning Unit), ASU (Air Starter Unit), etc.

· Ensure preventive maintenance is carried out properly in accordance with approved documents.

· Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work.

· Ensure equipment is in working/serviceable condition before releasing to user.

· Perform modification on electrical wiring as necessary with approved documents or data as per OEM

recommendation.

Job Requirements:

· Minimum NiTEC/Diploma in Automotive Engineering or equivalent.

· At least 1 years of working experience in Automotive industries.

· Comfortable with shift work arrangement.

· Candidate with LTA Class 3/4/5 license will have added advantage.

· Monday to Thursday, 0800 to 1730 hour, Friday, 0800 to 1700.

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279