Total 6,005 job vacancies in Singapore

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3800-$5500

Have AWS & bonus

Job Description

• To support study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• To support performing product validation according to the product design specification and customer requirements.
• To support generating drawing (3D/2D) for new and existing parts which require changes
• Main focal point for FAI build in new product introduction.
• Support in reviewing and Implement new router released from Engineering Dept.
• Leads projects for process and cycle time improvement.
• Update Production Router as per improvement.
• Identify, investigate, troubleshoot and resolve shortcoming in processes.
• Update relevant Work Instructions and Operating procedures for process improvements.
• To co-ordinate Engineer Change Order with production, planning and purchasing team to ensure smooth implementation.
• Support QA for failure analysis (RMA) and identification of corrective action for customer returns and internal CAR’s.
• Support QA team during customer/internal audits.

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 3 years relevant working experience
• Able to understand mechanical drawing
• Proficient in using Solidworks

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

--
Warmest Regards,
Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443 | www.atomrecruit.com
DID: 6524 2916 | M: 8699 8852 / 8838 5979
EA Personnel Reg No.: R1768368
60 Paya Lebar Road, #07-54 Paya Lebar Square, Singapore 409051

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3800-$5000

Have AWS & bonus

Job Description

• To support study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• To support performing product validation according to the product design specification and customer requirements.
• To support generating drawing (3D/2D) for new and existing parts which require changes
• Main focal point for FAI build in new product introduction.
• Support in reviewing and Implement new router released from Engineering Dept.
• Leads projects for process and cycle time improvement.
• Update Production Router as per improvement.
• Identify, investigate, troubleshoot and resolve shortcoming in processes.
• Update relevant Work Instructions and Operating procedures for process improvements.
• To co-ordinate Engineer Change Order with production, planning and purchasing team to ensure smooth implementation.
• Support QA for failure analysis (RMA) and identification of corrective action for customer returns and internal CAR’s.
• Support QA team during customer/internal audits.

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 3 years relevant working experience
• Able to understand mechanical drawing
• Proficient in using Solidworks

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

--
Warmest Regards,
Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443 | www.atomrecruit.com
DID: 6524 2916 | M: 8699 8852 / 8838 5979
EA Personnel Reg No.: R1768368
60 Paya Lebar Road, #07-54 Paya Lebar Square, Singapore 409051

Job Description

• Responsible for extracting, transforming and loading (ETL) of data generated in various stages of IC Design process (e.g. Physical verification stage).
• Integrate data from EDA tools (Calibre, DRV, ICV, Fusion Compiler, Innovus), design databases (netlist and layout), and workflow systems.
• Develop and optimize data workflows to facilitate data collection for analysis, machine learning and dashboard.
• Ensure data integrity, governance, and security best practices throughout all data engineering processes.
• Monitor job performance and implement automation and alerting for data operations.
• Work with on-prem data platform.
• Collaborate with data analysts and business stakeholders to gather requirements and ensure data quality and availability.

Job Requirements

• Bachelor/Master’s Degree in Electrical/Electronic Engineering or Computer Science
• With min. 3 years of relevant experience in similar industry
• Proficient in EDA tools (Calibre, DRV, Laker, ICV) and familiar with IC Design workflow for design data extraction.
• Proficient in MongoDB, Python or Perl for data processing.
• Strong data analysis, data verification and problem-solving abilities.
• Strong communication and collaboration skills, with the ability to work effectively in a fast-paced, team-oriented environment.
• Familiar with database system such as Relational Database Management System (MySQL) and Graph database (Neo4j) is a plus.

PERSOLSingapore Pte Ltd • UEN No. 200007268E • EA License No. 01C4394 •EARegistration No. R23117785 (Lok Ding Hann)
By sending us your personal data and curriculum vitae(CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliatesto collect, use and disclose your personal data for the purposes set out in thePrivacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with thePrivacy Policy.

• Well Established Company
• Basic Salary $5000 to $7000 + AWS + VB
• Working location: North-East Singapore
• Career progression opportunities
• Exposure to large-scale infrastructure and industrial automation projects

About the role

Manage and deliver SCADA, PLC, telemetry and industrial automation projects from initiation to completion, coordinating engineering design, procurement, installation, testing and commissioning activities across large-scale infrastructure and industrial automation projects.

Key responsibilities

• Manage and deliver SCADA, PLC, telemetry and industrial automation projects from initiation to completion.

• Coordinate engineering design, procurement, installation, testing and commissioning activities.

• Liaise with clients, consultants, subcontractors and internal stakeholders to ensure project objectives are achieved.

• Monitor project schedules, budgets, resource planning and project risks.

• Review technical documentation including control philosophies, I/O lists, network architecture and engineering drawings.

• Lead Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning and system handover activities.

• Ensure compliance with project specifications, quality standards and safety requirements.

• Prepare project progress reports and provide regular updates to management and clients.

• Manage variation orders, claims, project documentation and commercial matters.

• Support troubleshooting, system integration and operational readiness activities.
  

About you

• Degree or Diploma in Electrical Engineering, Electronics Engineering, Control & Instrumentation, Mechatronics or related discipline.

• Experience in SCADA, PLC, telemetry, industrial control systems, automation or ELV projects.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Feeling stuck in your career? It’s time for a change.

SICD’s 12-month Place-and-Train program equips you with the skills and confidence to launch a successful career as a Cyber Security Engineer.

Benefit from personalized 1:1 mentorship, a guaranteed SGD 3,000 monthly salary, and industry-recognized certifications — all designed to position you for long-term success.

Visit sicd.sg for more information, and join our upcoming webinar to learn more and ask questions about our career development program.

• MNC (Woodlands)

• Company Transport Provided

• Basic: $3500 to $5000 + AWS + VB

• Excellent Benefits + Career Progression

• Process Manufacturing Plant
  

Job Responsibilities:

• Plan and execute preventive and predictive maintenance programs for plant machinery, rotating equipment, and utilities systems

• Monitor equipment performance and support reliability improvement initiatives to minimize unplanned downtime

• Troubleshoot and perform root cause analysis for equipment failures and implement corrective actions

• Coordinate maintenance schedules with production and operations teams to ensure smooth plant operations

• Support maintenance activities for pumps, motors, conveyors, compressors, heat exchangers, boilers, steam systems, and other plant utilities

• Maintain maintenance records, equipment history, and spare parts inventory through CMMS system

• Support plant shutdown, equipment overhaul, and continuous improvement projects

• Ensure maintenance activities comply with workplace safety, GMP, HACCP, and plant operational requirements
  

Requirements:

• Degree / Diploma in Mechanical, Electrical, Mechatronics, or related Engineering discipline

• Minimum 2–5 years of maintenance experience in edible oil, food manufacturing, FMCG, chemical, refinery, or process plant environment

• Hands-on experience with rotating equipment, pumps, motors, compressors, and utilities systems

• Familiar with preventive maintenance, predictive maintenance, troubleshooting, and CMMS systems
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Remuneration package: SGD2,800 to SGD$4,500 Basic + AWS + Excellent Variable Bonus

• SINGAPORE Construction project

• Over 30 years of Reputable Engineering Company

• Electrical or Mechanical Engineering Graduates without experience welcome to apply: SDGD$2,800 to $3,700

Responsibilities

• Preparation of shop-drawing

• Attending Project meeting

• Manage sub-contractor

• Conduct site testing

Requirement

• Degree, Diploma or NITEC in Electrical or Mechanical Engineering or relevant

• Proficient in Chinese to liaise with Chinese speaking counterparts

• Electrical or Mechanical Engineering Graduates without/ No experience welcome to apply
  

We regret that only shortlisted candidates will be notified

Kindly email your resume in a detailed Word format to

roy.yeo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

50 Raffles Place, #19-12, Singapore Land Tower, Singapore 048623

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 69•• •757

Role: Senior Architecture Engineer (Operations Services) [P4/5 Grade]

Location: Novena

Type of Role: Contract (12 months renewable)

Remuneration: Base Salary - $12,000

Renumeration: 1 month bonus upon completion of 12 months' contract (subjected to attendance, performance etc..)

Role Overview:

The Architecture Engineer will join the Operations Architecture (OA) team onsite, supporting critical infrastructure for hybrid cloud, on-premises, and network environments. The ideal candidate will design, implement, and maintain secure, highly available architecture while ensuring compliance with Government IM8 and CIS standards.

Key Responsibilities:

1. Infrastructure Design & Implementation

• Architect network solutions (routing, switching, firewalls, load balancers) compliant with IM8/CIS hardening benchmarks.
• Manage VMware virtualization (vSphere, ESXi, vCenter) and Dell EMC storage (PowerMAX, Unity, Isilon) with a focus on security, redundancy, and performance optimization.
• Configure and harden Windows/Linux servers and Oracle Solaris OS (Active Directory, Group Policy, patching, Zones/LDOMs) to meet government security requirements.

2. Database & Middleware Support

• Administer MSSQL, Oracle DB (19c+, RAC, RMAN), and NoSQL systems, ensuring secure configurations, backups, and performance tuning, including Solaris-based Oracle deployments.

3. Government Compliance & Operations

• Enforce IM8/CIS compliance across infrastructure (e.g., STIGs, audit logging, encryption) including Solaris OS hardening.
• Document architectures, security controls, and processes for accreditation (e.g., SAF, CSA) with Solaris-specific documentation.

4. Troubleshooting & Leadership

• Lead cross-domain incident resolution (network/firewall/storage/OS/DB/Solaris) in alignment with ITIL v4 practices.
• Mentor junior engineers on Solaris administration and security best practices.
• Collaborate with cybersecurity teams on system hardening (including Solaris) and vulnerability remediation.

Required Skills & Experience:

Technical Expertise

• Networking:

1. Cisco/Checkpoint/Palo Alto (firewalls, SD-WAN).
2. Protocols: BGP, OSPF, VLANs, DNS, DHCP (IM8-compliant configurations).

• Virtualization & Storage:

1. VMware (vSphere 7.x+, NSX, HA/DRS)
2. Dell EMC (PowerMAX/VMAX, Unity, Data Domain)

• Operating Systems:

1. Oracle Solaris (Zones, LDOMs, hardening, patching).
2. Windows Server 2016+ (GPO, SCCM/WSUS, SEP).
3. Linux (RHEL/CentOS) – STIG hardening.

• Database:

1. Oracle DB (19c+, RAC, RMAN, SQL tuning)
2. MS SQL (Always-On, TDE).
3. NoSQL (MongoDB, Elasticsearch)

• Soft Skills:

1. Experience in government projects (e.g., GCC, MINDEF, CSA).
2. Ability to obtain/hold CAT 2 security clearance.
3. Strong documentation (SOPs, architecture diagrams) and stakeholder communication.

Nice-to-Have

Certifications:

• Oracle Solaris Certified Administrator/Engineer
• VMware VCP-DCV, Cisco CCNP, Dell EMC Specialist.
• Security: CISSP, CompTIA Security+, CIS/IM8 Auditor.
• ITIL v4, AWS/Azure/GCP Cloud Architecture.
• Scripting: Solaris: KornShell (ksh), Bash, PowerShell/Python/Ansible for automation & compliance checks.

Qualifications:

• Bachelor’s degree in Computer Science, Information Security, or related field (or equivalent experience)
• 8 to 10 plus years of hands-on experience implement, manage and maintain secure infrastructure solutions .

For a confidential discussion, interested applicants please kindly send your updated resume, with YOUR CURRENT and EXPECTED salary details.

About the Role

We are looking for a detail-oriented Planning Engineer to support project scheduling, progress monitoring, and on-site coordination. You will assist in translating design plans into executable schedules, track site progress, identify risks or delays, and help ensure the project is delivered safely, on time, and according to quality standards. This is a 1-year contract role, renewable based on performance and project needs.

Key Responsibilities

• Assist in developing and updating project schedules.
• Break down master schedules into monthly, weekly, and daily work plans.
• Monitor site execution progress and report deviations.
• Coordinate with construction, design, procurement, and subcontractors to ensure schedule alignment.
• Support resource planning for manpower, equipment, and materials.
• Highlight risks, delays, and propose mitigation measures.
• Assist in preparing daily, weekly, and monthly progress reports.
• Maintain project documentation and ensure data accuracy.

Qualifications & Skills

• Bachelor’s degree in Civil Engineering or related field.
• Min 1 years work experience in geotechnical, ground improvement, reclamation or construction planning preferred.
• Familiarity with project management tools and data analysis.
• Strong analytical, coordination, and communication skills.
• Ability to work in site conditions and manage multiple tasks.
• Ability to work flexible shifts (day or night) based on project requirements.
• Detail-oriented with good problem-solving ability.

• Project Execution & Coordination

Support and drive project execution across engineering, procurement, manufacturing, testing, and delivery phases. Plan, monitor, and track project schedules, deliverables, and milestones to ensure timely completion

• Customer & Stakeholder Management

Act as a key point of contact for customers, vendors, and internal stakeholders to ensure smooth communication and alignment

• Technical & Engineering Support

Interpret technical specifications, review engineering documents (e.g., P&ID, process calculations), and ensure compliance with customer requirements

• Procurement & Vendor Coordination

Coordinate with suppliers on material delivery, monitor vendor performance, and expedite procurement activities

• Project Control & Risk Management

Monitor project costs, budgets, and resource allocation

Identify risks, issues, and deviations, and propose mitigation plans

• Quality, Documentation & Compliance

Ensure proper documentation control, submission, and approvals throughout the project lifecycle

• Contract Administration & Payment Support

Assist in cost monitoring, invoicing, and milestone payments follow-up

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

About Company:

Our client deals with IT consultancy services, system integration and solutions.

Job Description:

- Maintain and troubleshoot flight control systems

- Run diagnostics, identify faults, and assist with system calibration

- Support software uploads and data monitoring on fly-by-wire aircraft

- Work closely with related aviation engineers and technicians to resolve issues

- Other ad hoc duties as assigned by the company

Job Requirements:

- Nitec / Higher Nitec / Diploma in Information Technology or related field

- Strong skills in IT troubleshooting, networks, and system diagnostics

- Interest in aviation with willingness to attend trainings when needed

- Good problem-solving, teamwork, time management and communication skills

- Willing to learn and good personality

Compensation:

- Work location: Changi Airport Terminal 2

- Working hours: 12 hours shift (8am - 8pm / 8pm - 8am)

- Standby allowance

- Training provided

Position Overview

We are seeking a detail-oriented Senior Engineer, Mechanical (Drafting Focus) to produce accurate, high-quality 2D and 3D technical drawings that clearly reflect engineering intent. This role is dedicated to drafting, documentation, and drawing management to support manufacturing, fabrication, and assembly activities.

Main Responsibilities

• Create and maintain accurate 2D drawings and 3D models using CAD software such as SolidWorks, AutoCAD, or Inventor.
• Translate engineering concepts, sketches, and design inputs into complete, manufacturable drawings.
• Apply proper dimensioning, GD&T, materials, surface finishes, and technical notes in accordance with ASME/ISO standards.
• Revise and update drawings based on design changes, engineering feedback, and project requirements.
• Ensure all drawings comply with company drafting standards, engineering codes, and documentation procedures.
• Manage drawing files, revisions, and version control using PDM/PLM systems.
• Collaborate with engineering, manufacturing, quality, and suppliers to resolve drawing-related issues and support manufacturability.

Requirements

• Degree in Mechanical Engineering or a related field (or equivalent relevant technical experience).
• 5+ years of expertise in designing small components, demonstrating strong attention to detail and engineering excellence
• Strong proficiency in CAD software with solid knowledge of GD&T, drafting standards (ASME Y14.5), and manufacturing processes.
• Ability to interpret engineering requirements and convert them into complete drawings.
• Knowledge of machining, sheet metal, welding, and fabrication drawings.
• Familiarity with optoelectronic components.

• Install, calibrate, and commission Particle Size Analyzers, XRF instruments, and Spectroscopy devices at customer sites.
• Perform preventive maintenance on analytical and scientific equipment to ensure reliability and accurate results.
• Troubleshoot, diagnose, and repair any equipment faults or performance issues promptly.
• Ensure all work complies with industry standards and quality procedures.

Requirements:

• Degree in Engineering
• At least 2 years of experience in servicing semiconductor instruments.
• Strong knowledge of laboratory analytical techniques, including spectroscopy, XRF, and particle size analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Summary

We are looking for an experienced Senior Control and Software Engineer to lead the architecture, design, and implementation of advanced control systems and embedded software for next-generation Solid State Transformers (SST), high-power grid-tied inverters, and large-scale renewable energy integration platforms.

You will drive technical innovation in medium- and high-voltage power electronics for applications including data center electrification, utility-scale renewables, microgrids, EV charging infrastructure, and smart grid systems. This senior role involves end-to-end technical ownership—from control strategy definition and system modeling to real-time software implementation, validation, and field deployment—while mentoring junior engineers and influencing technology roadmap decisions.

Key Responsibilities

· Lead the development and optimization of real-time control algorithms for Solid State Transformers (multi-stage, multilevel, and resonant topologies) and grid-connected inverters operating in both grid-forming and grid-following modes.

· Architect and implement robust embedded software and firmware (C/C++) for DSP, FPGA, and multi-core microcontroller platforms, ensuring high-performance bi-directional power flow, fault management, and seamless grid interaction.

· Define and execute system-level modeling and simulation strategies using MATLAB/Simulink, PSCAD/EMTDC, or similar tools; drive automatic code generation and model-based design workflows for production systems.

· Lead renewable energy integration efforts, including PV, wind, and energy storage systems, with advanced techniques such as virtual synchronous machines (VSM), hierarchical power management, droop control, inertia emulation, and compliance with stringent grid codes (IEEE 1547, IEC 61727/62116, Grid Code requirements).

· Oversee Hardware-in-the-Loop (HIL), Power-Hardware-in-the-Loop (PHIL), and Controller Hardware-in-the-Loop (CHIL) testing campaigns; lead performance validation, stability analysis, and certification activities.

· Provide technical leadership across cross-functional teams (hardware, systems, test, and firmware) on protection schemes, communication architectures (IEC 61850, Modbus TCP, DNP3, OPC-UA), cybersecurity, and functional safety.

· Mentor and guide junior control/software engineers; conduct design reviews, establish best practices, and drive continuous improvement of the control software platform and architecture.

· Identify and solve complex technical challenges related to harmonics, resonance, grid disturbances, renewable intermittency, and high-power SiC/GaN-based converters.

· Contribute to R&D strategy, intellectual property (patents), technical publications, and product roadmap planning to maintain technology leadership in SST and renewable integration.

Required Qualifications

· Master’s or PhD in Electrical Engineering, Power Electronics, Control Systems, or a related field (PhD strongly preferred).

· 7+ years of hands-on industry experience in control and embedded software development for high-power power electronics, with direct involvement in inverters, DC-DC converters, or Solid State Transformers.

· Demonstrated expertise in:

o Advanced control techniques (Model Predictive Control, resonant controllers, adaptive control, PLL/synchronization algorithms, dq0-frame and stationary-frame control).

o Real-time embedded programming (C/C++, RTOS, bare-metal) and FPGA firmware (VHDL/Verilog).

o Model-based design and automatic code generation workflows.

· Strong background in power electronics modeling, renewable integration, microgrid systems, and grid compliance testing.

· Proven track record of leading technical deliverables from concept through to successful product deployment or field operation.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met.
• Attending site coordinate meetings with main-con, consultants and other contractors.
• Hands-on and technical assistance for Electrical / ELV system installation and troubleshooting on site.
• Prepare material requisition for all Electrical / ELV equipment and materials.
• Prepare work programme for Electrical ELV Works with material delivery and installation activities in accordance with the project programme.
• Analyse, manage and track project costs against budget.
• Carry out testing and commissioning, combined services testing for TOP/CSC,  
• Handover of completed work activities with as built drawings and O&M to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Coordination with other trade of contractors such as Mechanical System, Process System, Structural etc.
• Participate in in-house engineering design works of Electrical system, including detailed design, load calculation, voltage drop calculation, cable sizing, cable routing, shop drawings, equipment selection, etc.
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Participate in liaison with Electrical / ELV suppliers for quotation, carry out equipment selection, technical and commercial evaluation.
• Prepare material submittals for electrical system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all electrical equipment and materials.
• Participate in tender preparation for new projects.

Requirements

• Min Diploma Degree in Electrical Engineering.
• Min 8 years of relevant working experience in building construction industry, preferable in handling Building Service Electrical / ELV works.
• Proficient in AutoCAD and Revit.
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.
• Experienced and possessed relevant knowledge in Electrical / ELV calculations is an advantage.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• BCA/SCDF/PUB authority certification is an advantage

Key Responsibilities

Product Design & Development

• Lead the mechanical design and development of new products and product enhancements.
• Create innovative concepts and translate them into detailed mechanical designs.
• Develop modular hardware architectures and reusable design solutions.
• Design complex mechanical systems, assemblies, and mechanisms while balancing performance, cost, manufacturability, and reliability.
• Convert product and customer requirements into practical engineering solutions.

Engineering Analysis & Validation

• Perform engineering calculations and technical analyses on components and assemblies.
• Identify technical risks early and develop effective mitigation plans.
• Develop and execute testing strategies, validation plans, and prototype evaluations to verify design performance.
• Ensure quality and reliability considerations are incorporated throughout the design process.

Project Execution

• Manage mechanical development schedules and deliverables for assigned projects.
• Support project planning activities and ensure designs are delivered on time and within budget.
• Collaborate with stakeholders to define product specifications and technical requirements.
• Drive continuous improvement initiatives and contribute to value engineering efforts.

Manufacturing & Production Support

• Work closely with manufacturing teams to support product industrialization and production readiness.
• Provide expertise in manufacturing processes including injection molding, machining, sheet metal fabrication, assembly, and related production methods.
• Troubleshoot manufacturing and product performance issues and implement design improvements when required.

Cross-Functional Collaboration

• Partner with Electrical, Firmware, Software, Manufacturing, Quality, and Product teams throughout the product development cycle.
• Participate in design reviews and contribute to multidisciplinary problem-solving efforts.
• Mentor and provide technical guidance to junior engineers where appropriate.

Requirements

Education & Experience

• Bachelor's degree in Mechanical Engineering or a related discipline.
• 8+ years of experience in mechanical product design and development.
• Proven experience taking products from concept and prototype stages through to mass production.

Technical Expertise

• Strong understanding of mechanical engineering principles and product development methodologies.
• Experience designing complex mechanisms such as:Gear trainsClutchesCamsLinkagesMotion-control systems
• Knowledge of electro-mechanical systems, including:MotorsSensorsPower transmission components
• Hands-on experience designing:Plastic componentsSheet metal partsDie-cast componentsRubber componentsMechanical assembliesElectro-mechanical assemblies
• Proficiency with SolidWorks and/or other 3D CAD tools.
• Familiarity with simulation and analysis tools (FEA preferred).
• Strong understanding of GD&T (Geometric Dimensioning & Tolerancing).

Preferred Qualifications

• Knowledge of Design of Experiments (DOE) and Six Sigma methodologies.
• Experience with:DFMEA (Design Failure Mode & Effects Analysis)Design for Manufacturing (DFM)Design for Assembly (DFA)Structured product evaluation and decision-making methodologies

Responsibilities

• Responsible for set-up and optimization of new device qualification, engineering lot processing, process data gathering and reporting
• Monitor and improve device yield performance and process SPC charts
• Investigate and troubleshoot production downtime and quality issues to provide lot disposition on outlier lots
• Perform engineering report and documentation such as 8D, DMAIC, FMEA, CP, Process Specification, Work Instructions, etc
• Implement continuous improvement program (CIP) to support yield and cost improvement, including developing systems for workflow management
• Facilitate training of manufacturing personnel on operating procedures and process specification
• Work closely with inter-department to improve process and equipment performance and capability
• Coordinate and communicate with customers for any process engineering related matters
• Setup systems and NPI requirements, handles qualifications and engineering activities

Requirements

• Diploma / Degree in any Engineering Discipline
• Working experience in semiconductor assembly manufacturing or process engineering and pre-assembly processes (Backgrind, Laser Marking, Laser Groove, Wafer Dicing) is an advantage
• Knowledge in SPC, DOE, FMEA, OCAP, Control Plan, WI and Process Specification
• Clear and effective communication with customers, suppliers and cross department
• Able to multi-task and support ad-hoc projects in process and equipment related activities
• Entry level candidates are welcome to apply

Research assistant in “Quantum computing engineer”

The Nanyang Quantum Solutions team led by Prof. Marek Gluza at NTU Singapore is seeking a new member to propose new quantum algorithmic solutions based on Riemannian geometry.

With whom? With Prof. Marek Gluza at NTU Singapore who is eager to debate with you whether double-bracket quantum algorithms or a different approach are the right one when executing on Helios or Heron. The research group is being formed and see https://marekgluza.github.io/ for the intended culture centered on the idea of serving experimental efforts through theoretical support developing quantum middleware solutions.

Key Responsibilities:

• Perform quantum compilation optimizing towards successful execution on quantum hardware.

• Support research on quantum algorithms by performing auxiliary data processing tasks.

• Analyze prospects of new research directions

Job Requirements:

• Bachelor's degree in mathematics, physics, computer science or related field

• At least 1 years of relevant experiences in research on quantum computing, e.g. final year project

• Excellent written and oral communication skills

• Proficiency in material covered by Nielsen and Chuang’s textbook

• Ability to work independently, develop solutions under strict timelines, meticulous and eye for details, excellent organizational and time management skills.

Supplementing a cover letter: As part of our merit-based hiring, we recognize that potential isn’t always reflected in traditional metrics. We invite all applicants to contextualize their journey in a personally written cover letter. This helps us evaluate your prospective potential alongside your existing abilities; see the guide for applicants for more information. Applicants from underrepresented groups or those from countries affected by crises are particularly encouraged to provide one (please do not rely on AI to generate it).

We regret to inform that only shortlisted candidates will be notified.

Position Summary

QA Engineer (Process Quality Control) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Responsible for backend semiconductor packaging processes which ball drop, bumping, singulation, back grind and mounting.
• Effectively providing engineering support in order to meet production output, product quality, efficiency, productivity, yield, cycle time and safety requirements.
• Responsible to analyse the process data and identify improvement actions and work on the improvement.
• Drive permanent solutions to resolve chronic process and quality issues.
• Responsible to evaluate new product/material/process during the pilot run and ensure process readiness.
• Responsible for the relevance of the Work Instructions, Control Plan, FMEA & Process Control documents.
• Responsible to prepare the line for internal & external audits and the follow-up actions.
• Any other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical, Electrical, Materials, Chemical, or related field).
• Prior experience in semiconductor packaging processes (ball drop, bumping, singulation, back grind, mounting) would be advantageous.
• Experience in process engineering, yield improvement, and quality control.
• Proficiency in data analysis and statistical process control (SPC).
• Familiarity with Failure Mode and Effects Analysis (FMEA), Control Plan, and Process Control documentation.
• Hands-on experience with new product/material/process evaluations.
• Ability to work in a fast-paced manufacturing environment.

Responsibilities:

• Design, develop, and maintain Java applications to meet business and technical requirements.
• Provide expertise in coding, testing, deployment, and support of enterprise applications.
• Collaborate with architects, business analysts, and project managers to ensure timely delivery of robust and secure systems.

Requirement

• Diploma or degree in Computer Science, Information Technology, or related discipline
• At least 1 to 2 years of software development experience
• Experience with Java frameworks and enterprise application development
• Experience in AWS cloud, Springboot and ReactJS is an added preference
• Experience in system analysis, troubleshooting, and performance tuning
• Familiarity with the software development lifecycle (SDLC)

Interested applicants, Please send your updated resume in Word format to hres@itcspl.com

Please indicate Job Code "Java Software Engineer - 101" on email subject

We regret that only shortlisted candidates will be notified.

Bacalso John Bryan Bedayo (Reg No. R1106648)

IT Consultancy & Services Pte Ltd

EA No: 92C5311

Please visit www.itcspl.com to learn more information about ITC

Location: Woodlands

Working hours: Shift hours, 2 days work, 2 days off. 720am to 730pm or 720pm to 730am.

The Job:

• Product Maintenance
• Review and analyze wafer test yields
• Determine hold lot disposition
• Communicate with customer for joint disposition.
• Yield Improvement - Identify and resolve issues impacting yield performance
• Perform device / hardware test qualification / Correlation and the issuance of the associated reports
• Support manufacturing operations on technical issues relating to device testing

The Talent:

• Degree in Electrical & Electronics Engineering with min 1 year of relevant working experience.
• Fresh graduates are welcome.
• Strong team player with good communication skills.
• High level of ambition and a strong desire to learn.
• Singaporeans only.

Next Step:

• Interested applicants, please send your resume to yingchong.koh@adecco.com with your current and expected salary.
• All shortlisted candidates will be contacted.

Koh Ying Chong

EA License No: 91C2918

Personnel Registration Number: R23116418

Structural Engineer (Structural / Steel Design)

Salary: $5000 - $5500
Working Hours: Monday - Friday 9am - 6pm
Location: 41 Senoko Way

Job Summary:
The senior Engineer is responsible for leading the structural engineering function with a primary focus on steel structure design and engineering management. The role involves overseeing structural analysis and design in accordance with Eurocode standards, managing engineering teams, coordinating with fabrication and construction teams, and ensuring that all engineering deliverables meet project specifications, quality requirements, and timelines.

Key Responsibilities:

• Perform and review structural analysis and design of steel structures in accordance with Eurocode and relevant international standards.

• Utilize engineering software such as STAAD for structural analysis and CAD tools for preparation and review of engineering drawings.

• Oversee the preparation, review, and approval of structural calculations, design reports, and fabrication drawings.

• Coordinate closely with steel fabrication teams to ensure design feasibility, manufacturability, and compliance with fabrication requirements.

• Provide technical guidance and mentoring to engineers and draftsmen.

• Manage engineering schedules, deliverables, and resource allocation to meet project timelines.

• Liaise with clients, consultants, and project teams to resolve technical issues and ensure alignment with project requirements.

• Ensure compliance with safety regulations, engineering standards, and company procedures.

• Support tendering and proposal preparation by providing technical inputs and preliminary engineering assessments.

Job Requirements

• Degree in Civil Engineering, Structural Engineering, or a related discipline.

• Minimum 1-2 years of experience in structural engineering with significant exposure to steel structure design.

• Strong knowledge and practical experience in Eurocode design standards.

• Proficient in structural analysis software such as STAAD.

• Skilled in CAD software for engineering drawings and coordination.

• Solid understanding of steel fabrication processes, connection detailing, and constructability considerations.
  

Chan Kai Wen Reg R23114137
THE SUPREME HR ADVISORY PTE LTD
EA No: 14C7279

Senior Automation Engineer

You will be responsible for industrializing and sustaining automation and robotic solutions to improve process repeatability, quality, and productivity across the repair facility. This role provides technical leadership in deploying industrial robots, collaborative robots (cobots), and other automation methods to enable consistent and reliable repair processes. The engineer will collaborate with cross-functional teams to standardize applied methods, drive scalability across processes, and build a sustainment program for long-term reliability of automated systems.

• Salary up to $8000 + AWS & Variable Bonus
• Mon-Fri, 7.30am-5pm
• Flexi Benefits
• Location : West (Transport provided)
  

Roles and Responsibilities

• Define automation architecture, standards, and best practices across PLCs, robotics, motion control, safety, and networking.

• Lead design, programming, and commissioning of industrial and collaborative robots (ABB, Fanuc, UR, KUKA) including integration with vision systems, drives, and HMIs.

• Translate business and process needs into control strategies, functional design specifications, and acceptance criteria.

• Lead automation projects from concept to handover—scope, schedule, budget, risk management, and resource coordination.

• Manage vendors, system integrators, and contractors through FAT/SAT planning, execution, and on-time handover.

• Use offline programming and simulation tools (e.g., ABB RobotStudio, FANUC ROBOGUIDE) for cell design and cycle-time optimization.

• Design, program, and commission Beckhoff TwinCAT 3 systems (IEC 61131-3 ladder, structured text, function block), including motion, EtherCAT I/O, and TwinSAFE.

• Conduct system validation and qualification (IQ/OQ/PQ) and ensure documentation accuracy.

• Implement process control plans, PFMEA, and risk assessments for new automated systems.

• Monitor automation performance using key metrics (OEE, FPY, downtime) and drive root cause analysis and corrective actions.

• Develop sustainment programs for preventive maintenance, software version control, and operator competency.

• Partner with EHS, Quality, Maintenance, and IT to ensure system safety, cybersecurity, and compliance with Life Saving Rules.

• Mentor engineers and technicians in automation and robotics best practices.

• Support continuous improvement and Lean initiatives to enhance flow, safety, and process stability.

Required Qualifications

• Bachelor’s degree in Mechatronics, Controls, Electrical, Mechanical, or Automation Engineering.

• Minimum 5+ years of experience delivering industrial automation and robotics projects from concept to commissioning.

• Proven hands-on experience with industrial robot programming (ABB, Fanuc, UR, or KUKA).

• Strong knowledge of PLCs and control systems, preferably Beckhoff TwinCAT 3 (EtherCAT, motion, TwinSAFE).

• Demonstrated ability to manage automation projects, vendors, and FAT/SAT activities.

• Experience in process industrialization, qualification, and validation (IQ/OQ/PQ).

• Experience integrating vision systems, motion control, and safety interlocks.

• Familiarity with programming languages (Python, C++, or Java) for data interfaces or simulation.

• Knowledge of CAD software (SolidWorks, Siemens NX) for tooling and layout design.

Automation Software Engineer (PLC Programming) – $4,000 to $6,000 + Bonus

Join a leading Singapore-based automation engineering company serving the semiconductor and electronics industries. Be part of a highly technical team that designs and builds advanced automated production systems for global customers.

We are seeking a skilled Automation Software Engineer with strong PLC programming expertise to develop, integrate, and support high-performance control systems from design through commissioning.

Key Responsibilities

• Follow SDLC to develop reliable, maintainable automation software based on user requirements
• Draft functional and detailed design specifications
• Analyse client requirements and define design parameters for automation solutions
• Participate in control system requirement analysis
• Design and update electrical schematics and engineering drawings
• Source electrical components and prepare BOM
• Program PLC and HMI systems (Omron, Mitsubishi, Proface)
• Perform system integration, testing, debugging, and commissioning
• Maintain technical documentation and project records
• Conduct electrical wiring, troubleshooting, and software improvements
• Provide remote and on-site customer support, including overseas assignments
• Ensure project timelines and quality standards are met

Requirements

• Diploma / Degree in Electrical, Electronics, Control, or relevant Engineering field
• 2 years of experience in automation, semiconductor, or manufacturing industry
• Strong PLC and HMI programming skills (Omron, Mitsubishi, Proface)
• Knowledge of motion control, analog, PID, and process control
• Familiar with industrial communication protocols (Modbus, EtherCAT, EIP)
• Ability to read and troubleshoot electrical schematics
• Willing to travel overseas when required

What We Offer

• Basic salary: SGD 4,000 – 6,000
• Variable bonus
• Exposure to advanced automation projects and global clients
• Career growth in a high-tech engineering environment

Working Hours: Monday to Friday, 8:30 AM – 5:30 PM

Work Location: Ang Mo Kio