Total 106 job vacancies in Singapore

1) Dismantle and Reassemble Instrumentation Equipment

• Identify potential sources of hazard prior to dismantling.
• Use correct procedures and correct method of dismantling.
• Carry out the correct isolation and disconnection procedure.
• Identify, check and prepare components.
• Apply appropriate tests and test equipment to ensure reassembly is correct and effective

2) Monitor and Maintain the condition of Instrumentation Equipment.

• Adjust instruments to meet the operating specification
• Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.
• Monitor and record what has been carried out in work history or log.

3) Diagnose Faults in Equipment.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Carry out Visual, Close and Detailed inspections on ‘Ex’ equipment.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

• Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.
• Relevant PPE is used to deal with unplanned discharges using company procedures.
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• Environmental protection and pollution control are enforced effectively with colleagues, subordinates and subcontractors.

5) Emergency Response

• Demonstrate competence during Emergency Response Drills and training exercises.
• Carry out Emergency Response role

Qualifications and Experience:

• Proven experience and/or qualified to N/SVQ/HNC/HND in Instrument Engineering or local equivalent
• 3 yrs experience desired with offshore experience preferred.
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Instrument/Mechanical Isolation Standards and Risk Assessment.
• COMP ex E’X’ course preferred.
• Medically fit to offshore International standards such as ENG1 or equivalent

Job Description:

• Responsible for performing visual and NDT inspection.
• Responsible for performing manual/mechanical/chemical cleaning.
• Work closely in accordance with Standard Operating Procedures, Data Cards, Process Controls to achieve the highest quality of work.

Requirement:

• Min Nitec in Precision/ Mechanical Engineering or relevant
• Min 2 years of NDT experience in PT,MT,UT,RT & ET

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary

Manicurists provide daily nail and hand care services, including manicures, pedicures, massages, and nail treatments, while delivering excellent customer service and maintaining a clean, sanitary work environment.

Responsibilities

• Discuss nail treatments, nail care and treatment options, and available services with clients to guide their choices
• Remove nail polish safely and efficiently to prepare nails for services and/or treatments
• Clean, trim, and file nails to achieve desired shapes and maintain nail health
• Reduce calluses and smooth rough skin to improve hand and foot comfort
• Massage and moisturize hands during manicures and feet during pedicures to enhance client relaxation
• Perform manicures and pedicures tailored to client preferences to ensure satisfaction
• Deliver exceptional customer service and build strong client relationships to encourage repeat visits
• Maintain a clean, sanitary, and organized workstation and environment to meet hygiene standards
• Stay informed on the latest nail trends and techniques to offer modern services
• Adapt to a fast-paced work environment while maintaining quality and attention to detail

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators

Switchboards, Motors, Wiring, Portable tools etc

• Comply with relevant authorisation procedures, safe working practices and specific instructions.
• Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.
• Ensure resources and spares are planned for and used cost effectively.
• Ensure the correct, current operating requirements are available for reference.
• Ensure any assets which have been maintained or had parameters adjusted still comply with spec ified operating requirements with minimum disruption and with the specified methods, tools and materials.
• Monitor and record any maintenance or adjustments accurately in work history in MMS.

2. Monitor And Assess The Performance And Condition Of Electrical Assets

• Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods Use monitoring equipment or procedures correctly to assess the condition of electrical assets Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• Compare current performance with previous assessments and take action where differences must be addressed

3. Diagnose Faults in Electrical Assets.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4. Monitor and Maintain Pollution Control Measures

• Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits
• Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure
• Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5. Emergency Response

• Carry out Emergency Response Role
• Show competence during drills and exercise

Qualifications and Experience:

• Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering 
• Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired  Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV 
• COMP ex E’x’ Course. 
• Preferred courses: HV/LV Protection and HVLV Switching. Medically fit to offshore International standards such as ENG1 or equivalen

Job Description & Requirements

· Ensure timely generation and issuance ofNDT report on daily basis.

· The inspector/team lead / engineer willperform inspections applying various NDT techniques in accordance withapplicable specific code, procedure, and or written criteria.

To be successful in this position, you musthave the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT,PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II inthe above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsivewhen call for assignments and willing to work after hours and weekends whennecessary.

· Maintain a professionalism and competenceat work

· Share in our purpose – to serve others,to pursue excellence, and to grow profitably,

· Employee will work as a team lead /member of local call out crews performing UT, MT, PT, ET, RT and RI.

Company Overview / Employee Value Proposition

ENGINEERING SERVICES of Electrical & Instrumentation

• Construction, Design, Testing & Commissioning and Operation of Metro rail projects for Power supply system and Sub system like ETTS, SCADA, and Substation automation.
• Project Management for Industrial projects and Thermal power plants
• Preparation of O&M Manual & Training arrangement
• Project management consultancy, Training, & development support
• Engineering Consultancy
• Equipment delivery for all kind of industries.

Job Summary

The Commissioning Technician is responsible for installing, testing, commissioning, and troubleshooting electrical/mechanical systems to ensure they operate safely and in accordance with project specifications and standards.

Responsibilities

• Install electrical and mechanical systems and equipment following project specifications and safety standards
• Perform functional tests, inspections, and performance checks according to technical drawings and specifications
• Identify, troubleshoot, and resolve faults during testing and commissioning to ensure system reliability
• Assist engineers with system start-up and site acceptance tests to verify operational readiness
• Prepare accurate test records, commissioning reports, and handover documents for project documentation
• Ensure all commissioning activities comply with safety regulations and project requirements
• Coordinate effectively with site teams, clients, and subcontractors to support smooth commissioning processes
• Provide technical support during defect rectification and warranty periods to maintain system performance

Required competencies and certifications

• Diploma/ITE or equivalent in Electrical, Mechanical, or related field
• Ability to read and interpret technical drawings and specifications accurately
• Knowledge of testing and commissioning procedures for electrical/mechanical systems
• Competence in fault finding and problem-solving during commissioning activities
• Familiarity with site safety procedures and work permit requirements
• Willingness to work on-site and support project schedules

Preferred competencies and qualifications

• Relevant experience in testing and commissioning works
• Skills in documentation, reporting, and team coordination during site activities

• Well Established Security Inspection Solutions Company

• Salary: $4500 - $5500

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East

• Variable bonus + Excellent Wellfare

Job Scope:

• Lead a Project Team of consultants, contractors, developer in daily-site activities
• Conduct project briefing and kick start meeting
• Responsible for periodic progress reports
• Evaluate the master program and monitor work progress
• Identify potential or actual causes of delay and take preventive or remedial actions
• Monitor submissions and clearances from relevant authorities
• Assist on documentations and make recommendation to clients for award of contracts
• Check safety management system and conduct periodic safety inspection
• Conduct feasibility studies and recommendations on the development concept, preliminary program and budget
• Identify and resolve site technical problems
• Supervise site works to achieve good quality
• Assist in investigating and liaising with public and the relevant authorities for public feedback

Requirement:

• Diploma in IT Engineering, Civil Engineering, Architectural or equivalent
• 2 - 3 years of relevant working experience in project management

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Assist with site walkthroughs and coordination with tenants’ contractors for unit setup, renovation, and reinstatement works.
• Carry out routine upkeep and minor repair tasks for building systems including HVAC, electrical wiring, plumbing, and sanitary fittings.
• Perform scheduled servicing of kitchen hood filters, specifically for F&B tenants.
• Conduct regular checks on public and back-of-house areas to identify and report maintenance issues such as power trips, leaks, or cooling faults.
• Monitor and update maintenance logs, weekly building condition reports, and monthly inspection records.
• Check and maintain fire safety equipment including extinguishers, hose reels, and dry risers to ensure compliance and readiness.
• Support landlord’s team on repair and upkeep works of shared facilities and systems.
• Assist in overnight maintenance works, such as equipment replacements or major system upgrades, when needed.

Requirements:

• Nitec/Higher Nitec in Mechanical, Electrical, Air Conditioning, or relevant discipline.
• Minimum 2 years of experience in property or facilities maintenance, preferably in a commercial environment.
• Practical knowledge of building systems such as M&E, ACMV, plumbing, and basic AV support.
• A team player with a positive attitude, who is comfortable working overtime when needed.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.
Email resume to ken.ng@peopleprofilers.com
People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724
http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398
Posting Personnel: Ng Jwee Ken

Responsibilities:

• In charge of performing daily operational activities in commercial building which includes attending to tenants' enquiries, needs and complaints.
• Responsible in performing preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control

Requirements:

• Min Nitec in Mechanical / Electrical Engineering or related field
• Min 2 years of working experience in facilities management/ ACMV
• Rotating shift is requried

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Provide technical assistance to customers via on-site visits, phone calls, WhatsApp, and email communications.
• Perform installation, commissioning, maintenance, fault diagnosis, and repairs at customer locations.
• Collaborate with vendors to escalate and resolve complex technical issues.
• Deliver training sessions and product demonstrations to end users or clients.
• Handle internal product servicing and support training initiatives.

Requirements:

• Diploma in Electrical/Electronic Engineering, Information Technology, or a related field.
• At least 2 years of relevant work experience.
• Strong communication and presentation skills, both written and verbal.
• Service-minded with a proactive and positive approach toward customer engagement.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Key Responsibilities:

• Conduct daily quality checking of calibration tools use by QC team to ensure quality standards

• Perform such as incoming raw materials, in process crate inspections, outbound inspections and others as required by customer

• Perform specific customer inspections using ERP

Roles Responsibilities: 

• Assist the supervisor to ensure the accuracy of the done reports by QC team during shift change

• Perform routine inspections such as incoming, in-process and outgoing based on customer’s specifications and drawings

• Perform inspection using digital forms (Kizeo) via IPAD

• Perform Y7 / Y8 under SAP for Non-conformance crates

• Ability to coordinate and liaise with internal members such as OPS packers, admin and or logistic coordinators

• Any adhoc duties as assigned by Supervisor / Executive or Manager

Requirements

• Proficient in MS Office (Words, Excel, Outlook)

• With 1 year of experience working in a warehousing environment

• Able to adapt into a fast paced yet meticulous role

• Team player

• Willing to work OT on weekdays, weekends and PH (Min. 50% commitment of weekends.)

The incumbent is responsible to:

• Assist the pharmacist in the processing of medication orders for inpatient and outpatient dispensing which includes typing, packing, labelling and distribution of drug supplies to the wards and other hospital departments
• Perform billing functions and ensure that cost and revenue of all stocks supplied are recovered
• Dispenses medicines under the supervision of a pharmacist
• Monitor and maintain inventory stock level of drugs in the areas of work
• Receive, unpack and check deliveries against the appropriate documents, to ensure that items supplied are correct and accounted for
• Perform stock receipts and issues strictly in FIFO order
• Assist in providing quality customer service
• Maintains the cleanliness of the work areas and prepare these for daily operations
• Assist in orientating new staff assigned to the section
• Supports the hospital by participating actively in the various activities organized by the hospital

Job Requirements:

• Certificate in Pharmacy Technician Course or a Diploma in Biomedical Science (Specialization in Pharmaceutical Science Technology) or Diploma in Pharmaceutical Science and relevant experience
• Able to work staggered shift duties Job

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• In charge of inspecting and examining aircraft components for leaks, cracks, breaks, or other issues.
• In charge of reading and utilizing maintenance manuals, illustrated parts catalogues, service bulletins, and other maintenance documents to troubleshoot and complete work assignments.
• In charge of maintaining, repairing, and rebuilding aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals.
• Responsible in performing routine maintenance operations, such as the replacement of equipment and aircraft components.
• Responsible in interpreting specifications or diagrams to inform installation, development or operation activities.
• In charge of performing regular inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments, and wear
• In charge of completing all tasks in the allotted time frame and to the quality standards of our company
• Responsible in promoting safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Taking charge of the order supplies, equipment, materials, and parts for repairs and general maintenance
• Taking charge of keeping detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Requirements

• Min Nitec in Aerospace Engineering or related
• Min 5 years of working experience in Aerospace Base Maintenance

To submit your application, please apply online to apply@rn-care.com or call +(65) tel:6513 56976514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Conduct engine disassembly from modular level to piece part level.
• Ensure all maintenance activities are conducted in accordance with engine manuals, approved technical data and regulatory requirements.
• Upkeep & maintain assigned equipment, tooling, and fixtures.
• Adhere to all applicable EHS rules and regulations and report immediately any unsafe practices/conditions.

Job Requirement:

• Minimum Nitec or Diploma in Aerospace, Mechanical Engineering or a related
• Minimum 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Good understanding of technical drawing and manuals.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel:6513 56976514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

  Requirement:- Must be Technically familiar with both Mechanical and Electrical in all kinds of Centrifugal Water Pumps, Submersible Pumps and positive displacement pumps, Diesel engines

Assembling ,dismantling , Installing, Testing Commissioning Repair Troubleshooting .Servicing overhauling Preventive and Breakdown Maintenance of various Types of Pumps, diesel engine and motor both in mechanical and electrical. with minimum 7 to10years of experience .
Preparing technical reports, maintenance records, and project documentation.
Identifying technical problems and recommending solutions or process improvements.
Strong understanding of engineering principles and technical standards.
Ability to read and interpret technical documentation.
Good communication and report-writing skills.

QUALIFICATION:-

Diploma in mechanical (or)electrical / Any trade certificate in mechanical (or) electrical.

We are looking for a dedicated Service Technician/ Engineer to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the technical manager, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.

• Liaise/co-ordinate with shipyard for related project.

• Assist in the repair works in the workshop.

• Brief business partners on various navigational/communication system setup.

• Provide technical support for business partners.

• Prepare reports on equipment to business partners.

• Any other ad hoc tasks related to business needs.

Requirements

• Diploma / Degree in Electronics/ Electrical / Communications Engineering

• 1- 4 years of Marine Experience

• Experience in Navigational Systems eg RADAR, ECDIS, GPS, DDU, GYRO will be preferred

About the role

Reporting to Production Supervisor, you’ll be responsible to manufacture quality products that meet and exceed the expectations of our customers. Production Technicians are responsible for executing the processing operations that support the needs of the business. Production Technicians also perform duties associated with operating, monitoring, connecting, cleaning and troubleshooting the drying equipment.

Your responsibilities

• Accountable for personal safety and also safety of others.
• Production Technicians will be assigned either to the dry side, liquid side or control room for the processing operations and may rotate through each area whenever required.
• Monitor and execute proper functions of the process equipment including wet process, dryers, fluid beds, bag houses and bulk transport systems.
• Operate the processing computer control system, including trouble shooting issues and monitoring while in operations.
• Adhere strictly to all GMP requirements to ensure proper manufacturing environment.
• Actively participate in the resolution of downtime issues.
• Assist in the creation of SOP’s, checklist, and work instructions whenever required.
• Provide training and guidance to new employees whenever required.
• Perform all secondary duties associated with the processing operations (including maintaining of log-sheets and batch records)
• Perform all required cleaning as instructed (including making proper sanitary connections for all forms of cleaning).
• Perform chemical tests and maintain day tank levels whenever required.
• Perform all assigned preventative maintenance of drying equipment whenever required.
• Execute proper disassembly and assembly of various machineries in the production areas.
• Complete all necessary transactions, reports and documentation with accuracy and timeliness.
• Maintain a clean and sanitary working environment at all times.
• Demonstrate capability to use independent judgment and work well within a team environment.

The experience we're looking for

• At least a diploma or degree in the related field of study (sciences, technical, health-related, food manufacturing etc).
• At least 1 year of working experience in the related field is required for this position.
• Previous experience in food, pharmaceutical or nutrition-related business and training preferred.
• Willing to work 12-hr rotating day and night shift
• Willing to work in Tuas
• Close attention to detail and experience with detailed documentation of tasks performed.
• Proven ability to follow up and complete tasks in a timely manner.
• Strong problem solving skills.
• Physical demands- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job:

o Frequently required to stand and walk

o Requires climbing stairs and ladders and working from heights

o Requires working in confined spaces when necessary

o Use hands to handle or feel objects, tools or controls

o Frequently lift and/ or move 5 – 15kg, occasionally lift and/ or move 30kg

o Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus - for human machine interface

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: QC Technician
• Working Location: Loyang
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.45pm)
• Salary Package: Basic salary up to $2,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Prepare and submit first article samples for approval.
• Create packaging specifications.
• Develop inspection plans for products.
• Support inspection processes for in-process, incoming, and outgoing parts.
• Train inspectors and operators on quality check points and measurement methods.
• Work with Production, Toolroom, and Suppliers to address quality issues.
• Ensure documents and records comply with ISO quality standards.
• Assist Engineers as needed.
• Manage and maintain all measuring and testing equipment.
• Help Engineers update monthly quality control reports, such as supplier performance.
• Assist Engineers or Managers in collecting and compiling data for reports.
• Support other quality-related tasks as required.

APPLY NOW!!!

• Minimum 2 years of relevant experience.
• Able to read engineering drawings.
• Good reporting and administrative skills.
• Able to work independently with minimal supervision.
• Experience with OGP Smartscope, CMM, or other measuring tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75340 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering
• Position Title: QC Technician
• Working Location: Tampines
• Working Hours: 5.5 days (Mon to Fri 9AM – 7PM, Sat 9AM – 1PM)
• Salary Package: Basic Salary up to $2,200 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform in-process, final, and incoming inspections of precision parts using measurement tools such as calipers, micrometers, height gauges, and CMM machines.
• Carry out dimensional and visual inspections to ensure products conform to engineering drawings and customer specifications.
• Record inspection results accurately on quality forms and maintain proper documentation for traceability and audits.
• Detect and report non-conformities or defects, and assist in root cause analysis and corrective actions.
• Ensure adherence to quality procedures, work instructions, and safety standards throughout the production process.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum 1 year working experience in related field
• Candidates with Mechanical Engineering background are preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #77167 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job scope:

• Performing Installation & modification of electrical, electromechanical and electronic parts of forklifts
• Troubleshooting electrical systems & wiring of electrical panels
• Understanding schematic diagram

Requirements:

• ITE/Diploma in any engineering related field
• Experience in hands on technical roles and able to read schematic diagram

Technician (Blending) - Aerospace

• Salary: up to $3500 + AWS (1 month) + Variable Bonus (2.5 months)
• Location: Pioneer, transport provided
• Working hour: 7.30am-5pm or 7.30pm-5am (Mon-Fri)
• Rotation shift every 2 weeks
• Night shift allowance - $14/night
• Flexi Benefits ($500/yr)

Key responsibilities:

• Set up and weld high temperature alloys in the repair of Turbine Blades products using TIG process

• Perform blending repair of Turbine Blades

• Ensure product quality, equipment care, meet production output/pace, housekeeping and schedules.

• Adhere to all applicable EHS rules and regulations and report immediately any unsafe practices/conditions.

• Carries out other duties as assigned

Qualifications/Requirements

• NITEC in Mechanical Engineering or TIG welding experience is preferred.

• At least 3 Year(s) of working experience in the related field is required for this position.

• Able to perform rotating shift.
  

Location: Island Wide
Working Hours: 44 Hours/week (Shift timings)
Salary: $3000 - $5000

Key Responsibilities:
- Manage and monitor prawn broodstock health and breeding activities.
- Select suitable broodstock for breeding and reproduction programs.
- Conduct spawning, hatching, and larval rearing operations.
- Monitor water quality parameters, including temperature, salinity, pH, dissolved oxygen, and ammonia levels.
- Maintain breeding tanks, ponds, filtration systems, aeration equipment, and other aquaculture facilities.
- Ensure compliance with farm operating procedures, food safety, and environmental regulations.
- Perform routine cleaning and maintenance of aquaculture equipment and work areas.
- Work closely with farm managers and technical specialists to achieve production targets.
- Ad-hoc duties as required

Requirements
- Experience in aquaculture, fisheries, hatchery, or prawn farming preferred.
- Basic knowledge of aquatic animal health and water quality management.
- Ability to work outdoors, weekends, public holidays, and shift schedules when required.
- Willingness to work in wet and humid environments.
- Knowledge of record-keeping and farm management practices is an advantage.

Job Description:

• In charge of execution of service and maintenance workflow.
• Responsible for liaising closely with client representatives on all service and maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Responsible in providing support to supervisor in ensuring the timely delivery and completion of troubleshoot, service and maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Job Requirements:

• Min Nitec in Electrical/Electronic Engineering
• Min 2 year of working experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Possess Class 2 or 3 driving license

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900