Total 13,384 job vacancies in Singapore

Job Description & Requirements

Responsibilities:

•  Take charge of all electrical and mechanical assemble issue
•  Take charge of all electrical accessories and wiring parts purchase loading
•  Liaise with subcontractors
•  Manager stock inventory level

Requirements:

•  Nitec equivalent or equivalent in Mechanical Engineering
•  Physically strong as parts / modules might be heavy
•  Working experience in both mechanical and electrical environments will be an advantage
• Open for contractual role

Ang Hoe Keong | EA Personnel Registration No.: R1106345

RS Recruitment Agency | EA License No. 17C8809

Job Description:

As a QEM PQE Electrical Failure Analysis (EFA) Engineer, you will be responsible for driving deep technical understanding and resolution of yield, quality, and reliability challenges for advanced NAND memory products manufactured in Fab10.

You will support both new product introduction (NPI) and high-volume manufacturing (HVM) by performing die-level electrical analysis, failure mode construction, and innovative characterization to enable robust product qualification and continuous yield improvement. Leveraging strong knowledge in device physics, probe testing, and wafer fabrication processes, you will identify root causes of electrical failures and translate insights into actionable test, process, and design improvements to enhance product performance and outgoing quality.

Job Responsibility:

• Perform electrical failure analysis (EFA) using bench characterization to identify failure mechanisms at die, circuit, and transistor levels

• Construct failure models and root cause understanding for yield excursion, reliability issues, and customer return cases

• Design and execute bench DOE and probe engineering experiments to validate hypotheses and drive yield/quality improvement

• Translate characterization results into test, process, or device optimization solutions to improve yield, reliability, and product quality

• Conduct circuit and layout tracing analysis to correlate electrical failure signatures to physical/process limitations

• Support NPI qualification and HVM issue resolution, ensuring timely product release and manufacturing stability

• Drive data-driven yield improvement programs through close collaboration with cross-functional teams (PI, TD, PE, TSE, YE)

• Troubleshoot complex issues across test conditions, probe limitations, and device design interactions

• Develop custom test conditions, scripts, and methodologies for advanced failure validation and experiment execution

• Contribute to process capability improvement and cost reduction initiatives by resolving abnormal manufacturing behaviors

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.​

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

  Requirements:

• Bachelor’s / Master’s Degree in Electronics/Microelectronics/Material Science/Physics/Applied Science

• Excellent problem-solving and analytical skills.

• Proven ability to communicate effectively both written and verbal to all level.

• Proven ability in multi-tasking complex projects and driving them to completion.

• Strong teamwork skills and the ability to build strong peer relationships

• Knowledge of Circuit analysis and layout tracing, Yield analysis and failure mechanisms

• Strong understanding of NAND memory operation and architecture, CMOS device physics and wafer fabrication processes

• Hands-on experience in Electrical failure analysis, bench characterization, Probe testing and test flow understanding, Data analysis and DOE methodology

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Embody Micron’s core values:
  People – Respect, develop, and empower others
  Innovation – Drive continuous improvement and breakthrough thinking
  Tenacity – Show grit and determination
  Collaboration – Build trust and foster teamwork
  Customer Focus – Deliver excellence and value

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment based on process specifications. 
• Ability to use computer-based programs and applications to perform daily work/duties.
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.
• Provide machine operations coverage and backup supports when necessary.

Requirements:

• Diploma/Degree in Microelectronics/Electrical/Mechanical/Chemical Engineering or equivalent.
• Understanding of semiconductor process - at least 1-3 years of experience in semiconductor processes (Photolithography, Dry/Wet Etch/Cleans, Thin Films, Diffusions, Chemical mechanical Polishing, Metrology, etc.)
• Able to perform independently yet working in a team. 
• Willing to perform in 12-hours shift working arrangement.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Technical Sales Engineer | Lighting Solutions

• Work Location: Ubi, Singapore
• Working Hours: Mon – Fri 8.30am – 6.30pm
• Monthly Salary: Base up to $4000 + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established provider of lighting solutions with decades of industry experience. The company is recognized for delivering high‑quality, innovative products and services that meet diverse customer needs. With a strong presence across multiple markets, the company focuses on creating sustainable and reliable lighting systems that enhance environments and improve user experiences. The brand is committed to excellence, customer satisfaction, and continuous improvement in both design and technology.

Responsibility

• Sales & Marketing Execution – Drive business growth by promoting lighting products and building strong client relationships.

• Product Promotion – Deliver presentations and demonstrations to enhance brand visibility and customer awareness.

• Client Solutions – Handle enquiries, attend site visits, and provide tailored solutions to meet customer needs.

• Quotation & Contract Management – Prepare quotations and tenders, negotiate contracts, and ensure timely delivery of orders.

• After‑Sales Support – Provide troubleshooting, maintenance, and project coordination to strengthen customer satisfaction.

• Operational Support – Perform ad‑hoc duties to support overall business operations and departmental objectives.

Requirement

• Diploma/Degree in Electrical / Electronic Engineering or Marketing or Business
• Minimum 2 years of engineer experience in local construction industry
• Good interpersonal and communication skills, with the ability to coordinate effectively.
• Product training will be provided
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Chen Hoe Nam | EA Personnel License: R25158678

• Support, manage and coordinate Mechanical works and services for building construction projects
• Plan, develop, and manage work schedules to ensure tasks are completed on time.
• Prepare progress reports for clients and project managers, detailing delays, defects, and necessary rectification measures for Mechanical works.
• Provide technical guidance and resolve Mechanical-related issues efficiently.
• Report on Mechanical progress and arrange site inspections with contractors, subcontractors, and clerk-of-works.

Requirements

• Minimum 1-3 years of relevant experience with an M&E Contractor
• Diploma/Degree in Mechanical, Mechatronics or relevant engineering discipline
• Local construction knowledge

If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to koh.dickson@bayesrecruitment.com

Dickson KOH, EA Registration R1103367

www.bayesrecruitment.com

As we are growing and strengthening our Data Center business in the region, we are hiring a Principal/Lead Electrical Engineer to be based at our Singapore office. This role will focus in providing technical capability in mechanical engineering in Data Center projects; working with the Asia Pacific Data Center Lead, focusing on technical aspects and project management. 

Main duties: 

• Lead Electrical multi-disciplinary/functional team in the region to deliver Data Center and other technically challenging projects.
• Perform engineering tasks on the mechanical services from concept, BOD, 35% to 100% designs (including calculations, computer simulations, specifications etc.) for Electrical infrastructure in Data Center projects.
• Provide technical guidance to project and design engineers and resolve any technical problems faced during design and construction stages.
• Ensure that consistent quality standards and conformance with design plans / specifications are maintained across the project and coordination with other disciplines to ensure consistency across the project.
• Support in preparing proposals and bids when needed.
• Lead project/site meeting with Client, PM and Consultants from other disciplines (internal and external) through all stages of the project.
• Understand and follow plans, procedures, workflows, systems and tools to meet specific project requirements.
• Liaise and coordinate relevant technical issues with other disciplines.
• Build cultivate and build relationships with client generally as a Doer/Seller role.
• Support site supervision and plant commissioning activities when required.

To be a successful candidate, you shall possess: 

• Degree in Electrical Engineering recognized by PEB Singapore.
• Familiarity with relevant Local Codes and international standards to ensure compliance.
• Minimum 10 years of relevant working experience, with at least 3 years in Data Center Projects.
• Ability to work independently and in a team.

The salary will commensurate the skillsets and experience.

Please note:  If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Jacobs. Jacobs complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of age, race, religion, language, nationality, marital status, or family responsibilities.

#LI-WW1

Responsibilities :

• Support equipment development activities for new or enhanced semiconductor tools and subsystems
• Assist with tool characterization, engineering experiments, and data collection during development or early deployment phases
• Analyze equipment data to support capability assessments, design learning, and risk reduction
• Support documentation of equipment requirements, engineering changes, lessons learned, and development reports
• Participate in tool build, installation, upgrade, and qualification activities from a development perspective
• Collaborate with vendors, manufacturing, process engineering, and facilities teams under engineer supervision
• Prepare technical summaries and presentations for development reviews and project achievements
• Adhere to all safety, environmental, and cleanroom requirements

• Maintain and publish roadmaps to define work/CIP’s required to move toolsets from one EMI level to the next in preparation for transfer to HVM.


Requirements :

• Bachelor’s or Master’s Degree or PhD in Mechanical, Chemical, Electrical/Electronic Engineering

• Understanding of Physical Vapour Deposition (PVD) or Chemical Vapour Deposition (CVD) equipment operation, working principles, fixing, and tool installation procedures

• Exposure to R&D PCVD equipment transfer and the ability to develop/optimize equipment hardware design

• Exposure to PCVD pump/abatement/chiller selection and ability to develop/optimize equipment hardware design is preferred

• Remarkable oral and written communication skills, demonstrating the ability to express messages clearly and effectively on a local and global scale.

• Shown ability to prioritize and handle numerous projects simultaneously, efficiently applying available resources or seeking peers’ and/or management help to drive solutions.
  

  Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenan

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focused on developing future technology systems to support growth in the rapidly evolving data center industry. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Monitor market trends and research to identify breakthrough opportunities in power architectures and converter topologies for data centers.
• Drive technical excellence across design, modelling, simulation, prototyping and performance testing of new power conversion topologies, control schemes and components.
• Oversee critical design reviews and own technical project direction.
• Represent the company as a subject matter expert when engaging with suppliers, customers, and partners.
• Help to create, review and improve research project processes, from idea creation to project transfer deliverables.
• Identify the skills needed in the team and support recruitment of suitable engineers.
• Work with a commitment to continuous improvement, transparency, and technical expertise.
• Work as a hands-on individual contributor, researching key topics and delivering ideas, designs, and documentation.

Requirements:

• PhD or Master’s degree in Electrical / Electronic Engineering or related field.
• 5+ years’ experience in power electronics research, with increasing mentorship responsibilities.
• Expertise in power electronics, including common topologies, magnetics, control schemes and components.
• Experience with architecture drawings, electronic schematics, component datasheets and PCB layout drawings.
• Knowledge of embedded software (C/C++) and coding practices is preferred.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Familiarity with SiC/GaN devices, EMI, HVDC, solid state transformers, thermal design and regulatory standards.
• Expertise in using simulation tools (MATLAB, Simulink, LTspice, Python, etc).
• Strong analytical, problem-solving, leadership and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.

Why Join Us:

• Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams.
• Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next generation infrastructure.
• Opportunities to publish, patent and innovate designs for future products.
• Competitive compensation, research autonomy and a continuous learning culture.

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Develop, analyze, and approve repair schemes for metallic and/or composite aerospace components.
• Ensure repairs comply with OEM specifications, regulatory requirements, and customer standards.
• In charge of process improvements to improve process robustness, process efficiency and repair yield.

Requirements:

• Degree in Mechanical engineering or equivalent
• At least 3 years of experience in repair engineering in aerospace industry.
• Knowledge of repair processes in aerospace.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Key Responsibilities

• Design, deploy, and manage Kubernetes clusters using Rancher in production and non-production environments.
• Integrate and manage NeuVector for container security (runtime scanning, policy enforcement, vulnerability management, etc.).
• Implement platform automation using tools such as Terraform, Ansible, Helm, and CI/CD pipelines.
• Collaborate with security and networking teams to define and enforce policies across containerized platforms.
• Build and maintain observability (monitoring, logging, alerting) and operational dashboards.
• Work closely with development and DevOps teams to provide reliable platform capabilities.
• Participate in incident response, RCA, and performance tuning activities.
• Optionally contribute to HCI platform operations and VM orchestration if using Harvester.

Required Skills and Experience

• 6+ years of experience in DevOps, SRE, or Platform Engineering roles.
• Strong hands-on experience with Kubernetes architecture and operations (preferably K8s v1.20+).
• Experience managing production-grade Kubernetes clusters with Rancher.
• Solid understanding of container security best practices and operational experience with NeuVector.
• Proficiency in infrastructure as code (e.g., Terraform, Helm, Ansible).
• Experience with CI/CD tools such as GitLab CI, Jenkins, or ArgoCD.
• Good knowledge of Linux systems, networking, and shell scripting.
• Understanding of monitoring/logging tools such as Prometheus, Grafana, Fluentd, ELK, or Loki.

Nice to Have

• Experience with Harvester or other HCI platforms for VM management on bare metal.
• Familiarity with air-gapped or edge deployments.
• Exposure to hybrid/multi-cloud platform deployments.
• Certifications in Kubernetes (CKA/CKS), Rancher, or related technologies.

• Assist in the planning, deployment, and enhancement of cybersecurity products and solutions across client environments.
• Support the implementation, configuration, and upgrade of security platforms, ensuring optimal performance and compliance with security best practices.
• Provide technical guidance and support to both internal teams and external clients on the effective use of the company’s cybersecurity solutions.
• Conduct product training sessions and knowledge sharing for clients and internal stakeholders to ensure proper usage and adoption.

Requirements:

• Diploma in IT or equivalent
• At least 2 years of hands-on experience with CyberArk within the IT, Information Security, or Cybersecurity industry.
• Strong technical troubleshooting and problem-solving skills.
• Ability to work independently as well as collaboratively in a team environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Location: North Singapore
• Office Hours, Monday – Friday
• Competitive Salary + AWS + Variable Bonus
• Medical Benefits Provided

About the role:
Join a global leader in the Life Sciences and Medical Technology industry. We are seeking a Quality Engineer to support quality assurance and continuous improvement initiatives across manufacturing, supply chain, and product development functions. This role offers the opportunity to work in a highly regulated environment and contribute to the quality and reliability of innovative scientific and healthcare products.

Job duties:

• Investigate product and system quality issues, perform root cause analysis, and recommend corrective actions.
• Support product testing activities by reviewing and evaluating test methods, protocols, and reports to ensure compliance with quality and regulatory requirements.
• Utilize statistical tools and data analysis techniques to drive quality improvements and support risk-based decision making.
• Collaborate with cross-functional teams to review engineering drawings, specifications, inspection plans, and manufacturing procedures.
• Establish critical quality characteristics and inspection requirements for components, sub-assemblies, and finished products.
• Drive continuous improvement initiatives using quality management tools and methodologies.
• Participate in product change control activities to ensure compliance with applicable quality and regulatory standards.
• Support risk management processes throughout the product lifecycle, including identifying, assessing, and mitigating quality risks.
• Monitor industry regulations, standards, and best practices relevant to medical devices and life science products.
• Contribute to quality system activities and support internal and external audits where required.

Job requirements:

• Bachelor's Degree in Engineering, Quality, Biomedical, Mechanical, Manufacturing, or a related scientific discipline.
• Minimum 3 years of experience in Quality Engineering within Medical Device, Life Sciences, Biotechnology, or regulated manufacturing environments.
• Knowledge of validation activities including Equipment Qualification (IQ/OQ/PQ) and process validation principles.
• Understanding of quality standards and regulations such as ISO 13485, ISO 14971, or FDA Quality System requirements will be advantageous.
• Experience with quality tools such as CAPA, FMEA, DOE, statistical sampling, and root cause analysis.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.
Delete personal data as it is not required at this application stage.
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Poh Tze Qi (Kayley) | R2197837
ScienTec Consulting Pte Ltd | 11C5781

Job Description

The Project Engineer plays a key role in managing and executing complex electrical projects—ensuring adherence to timelines, budget, safety, and quality standards. The role supports the Project Manager in all stages of the project lifecycle and contributes to technical, operational, and administrative aspects of project delivery.

Job Responsibilities

Project Support & Planning

• Assist in project engineering activities including electrical installation works, testing, and commissioning under supervision.

• Support preliminary design reviews and assist in preparing basic cost estimates for Design and Build tenders.

• Assist the Project Engineer and Project Manager in tracking project schedules, monitoring task progress, and coordinating daily work activities.

• Support coordination with subcontractors and suppliers to ensure smooth site operations.

Site Monitoring & Progress Updates

• Assist in conducting site inspections and record progress using digital forms, photos, and checklists.

• Update site progress data in the project management system and assist in monitoring actual versus planned progress.

• Identify and report site issues, delays, or discrepancies to the Project Engineer or Project Manager promptly.

• Coordinate with drafters, procurement, and internal teams to support site requirements and work sequencing.

• Assist in preparing basic progress reports and dashboards for internal review.

Stakeholder & Site Coordination

• Support project meetings by preparing updates, taking minutes, and following up on assigned action items.

• Liaise with subcontractors, vendors, and internal teams to support daily site coordination.

• Respond to routine site queries from subcontractors and consultants, escalating complex matters when required.

• Assist in arranging and supporting site walkthroughs or inspections for clients, consultants, or management.

Documentation Management

• Maintain accurate project documentation including daily site reports, inspection records, drawings, and checklists.

• Ensure documents are properly filed, tagged, and updated in accordance with company procedures.

• Assist in preparing periodic progress updates and submission documents.

• Support standardisation of documentation practices to improve consistency and traceability.

Change & Digital Adoption Support

• Assist in implementing new processes, digital tools, and workflow improvements on site.

• Support site teams in understanding and using new systems and procedures.

• Provide feedback to the Project Engineer or Project Manager on site-level challenges during implementation.

• Help monitor usage and compliance with new tools and workflows.

Risk & Safety Support

• Assist in identifying and reporting site risks related to safety, quality, schedule, or resources.

• Support the Project Engineer in updating risk registers and tracking mitigation actions.

• Promote safe work practices on site and report unsafe conditions or near misses promptly.

• Encourage subcontractors and workers to comply with safety and quality requirements.

Job Requirements

• Experience: Minimum 1–2 years of relevant experience in electrical engineering or site-based electrical works.

• Educational Qualifications: Diploma in Electrical Engineering or equivalent.

• Technical Knowledge: Basic understanding of electrical systems including power distribution, lighting, cabling, and ELV systems.

• Regulatory Awareness: Familiarity with local electrical codes, authority requirements, and safety regulations.

• Project Skills: Ability to support project coordination, scheduling, and site activities under supervision.

• Communication Skills: Good interpersonal and communication skills for coordination with site teams and stakeholders.

• Software Skills: Basic proficiency in AutoCAD and common project management or reporting tools.

• Personal Attributes: Detail-oriented, willing to learn, proactive, and able to work effectively in a site environment.

Key Responsibilities

• Define and implement NAND Flash reliability test flows to assess product reliability performance and prevent extrinsic/intrinsic reliability escapes.

• Perform high‑volume statistical data analysis to evaluate NAND DPM/ intrinsic reliability risks and trends.

• Drive electrical failure analysis, including  advance characterization, to identify root causes and solution spaces.

• Develop short‑term countermeasures such as targeted stresses and screens, applying knowledge of digital/analog circuits, device physics, and process engineering.

• Qualify the product with innovative control measures to provide best in Class DPM and Cell reliability.

• Collaborate closely with Fab, NAND Technology, NAND Design, Product Development, System Development, and Quality/Reliability teams to develop solutions and enable shipment of high‑quality end products.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and aligning with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Support customer inquiries and provide technical insights related to product reliability.

• Drive critical initiatives to enhance the overall reliability program and influence the direction of future product development.
  

  Qualifications And Skills:

  • Bachelor’s degree  or Master’s degree  with of relevant experience in Electrical Engineering or related field

  • Knowledge in Semiconductor Reliability, NAND Technology, and Electrical Failure Analysis.

  • Understanding in Design, Device Physics, Circuits,  Process.

  • Strong statistical analysis, communication, and problem‑solving skills.

  • Experience with application of AI tools, LLMs ,  data analysis tools (e.g., Python, JMP, Tableau).

  • Strong analytical and problem‑solving skills.

  • Team player and self driver.

Responsibilities

• Perform assembly, installation, setup, and commissioning of semiconductor equipment at customer sites.
• Troubleshoot, diagnose, and repair mechanical, electrical, and optical issues to ensure optimal machine performance.
• Execute machine upgrades, calibration, and customer buy-off testing according to technical specifications.
• Provide technical support to customers via on-site service, remote calls, and user training.
• Prepare service reports, maintain documentation, and ensure compliance with safety and operational standards.

Requirements

• Diploma or Degree in Electrical, Electronics, Mechanical, Mechatronics, or related Engineering field.
• Minimum 2-4 years of experience supporting semiconductor equipment, high-precision/automated machine.
• Strong knowledge of semiconductor machines, inspection systems, or vision system.
• Good understanding of machine vision components including cameras, lenses, and optical systems.
• Strong troubleshooting skills with good communication ability and willingness to travel for onsite support.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

By submitting your application for this position, you consent to the collection, use, and disclosure of your personal data by GMP Technologies (S) Pte Ltd and its recruitment partners, including Employment and Employability Institute Pte Ltd, for the purpose of i) employment facilitation and ii) data and statistical analysis. You may find out more information on the PDPA policies at GMP Technologies (S) Pte Ltds website and [https://www.e2i.com.sg/pdpa/].

Responsibilities

• Perform end-to-end provisioning, testing and commissioning of telecom services

• Conduct BERT, OTDR, RFC2544 testing for service activation

• Carry out fiber patching, cross-connect, cabling and PoP/DC installation

• Execute MOP for installation, migration and troubleshooting activities

• Perform onsite work at customer locations, data centres and PoPs

• Support fault isolation and service restoration

• Maintain service, inventory and engineering documentation

Requirements

• Minimum 3 years experience in telecom field operations (5+ preferred)

• Hands-on experience in DWDM / OTN / Metro Ethernet networks

• Strong experience in:

  • Fiber optics (patching / splicing / cross-connect)

  • Testing tools (BERT, OTDR, RFC2544)

• Experience working in telco or vendor environment

• Comfortable with onsite field work and physical installation tasks

• Able to support 24/7 standby and night maintenance activities

• Good documentation and reporting skills (Excel, reports)

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOL Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R1768000 (Nguyen Quynh Nhu)

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

CHEMICAL ENGINEERS

Key Responsibilities:

• Support production workshops in analyzing and resolving technical and chemical issues
• Proposing technical and ergonomic improvements to processes
• Commissioning new equipment
• Creating P&IDs and updating them
• Managing projects related to process optimization (specifications, budget, cost tracking)
• Ensuring the planning, organization, coordination, and execution of technical projects
• Collaborating with a multidisciplinary team
• Create and update job descriptions
• Develop and optimize work procedures while ensuring compliance with documentation and manufacturing methods
• Participate in departmental risk assessments in support of the safety manager
• Actively participate in the inventory of areas within the scope of the position
• Implement and coordinate action plans.

Requirements:

• Bachelor or Masters Degree in Chemistry, or equivalent qualification
• 5 years of proven experience in a similar role within the chemical industry
• Strong communication skills.
• Analytical mindset,ability to synthesize information, and proactivity.
• Knowledge of precious metals and refining processes is a plus
• Proficiency in computer tools (Office, SAP)
• The position requires a strong sense of responsibility, versatility, and the ability to work well under pressure.

Interest applicants, pls email updated resume to jessie@recruitexpress.com.sg

Jessie Hoe Huey Miin

CEI Reg No. R1103861

EA Lic: 99C4599

RESPONSIBILITIES 

• Ensure the sputtering machine is tuned to achieve higher capacity. 
• Adjust the sputtering parameter to maintain high-quality output and minimizing defects. 
• After Machine PM & changed material, perform conditioning to achieve guzik and start Mass production ASAP. 
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition. 
• Optimize the sputtering process to maximize the efficient use of materials and reducing waste. 
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional issues. 
• Analyze data from the sputtering process to identify trends and areas for improvement. 
• Base on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality. 
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results over time.

REQUIREMENTS

• Bachelor's degree in Material Science / Chemistry / Nanotechnology, or any related Engineering. 
• Diploma with 3-4 years of experience in a manufacturing / semiconductor process-related role.
• Understanding of Sputtering / thin film / deposition technology.
• Good knowledge of Minitab & Microsoft Office.
• Strong analytical skills, problem-solving skills.
• Strong collaboration and communication.
• Continuous improvement mindset.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

• Build and troubleshoot automated assembly machines, robotic systems, and sub-assemblies from engineering drawings.
• Debug machines, robots, and processes for newly built machines.
• Perform machine and robot alignments, calibration, and final set-ups.
• Assist Engineers in carrying out new machine, robotic system, or equipment start-up.
• Assist Engineers in continuous yield improvement programs through machine mechanization, robotic automation, and process optimization.
• Experience in machine and/or robotic equipment assembly
• Able to read and interpret engineering drawings
• Hands-on experience in machine troubleshooting and assembly is preferred

Interested candidates please send in your resume to:
Reina Patricia Johan
Outsourcing Team
Recruit Express Pte Ltd
Email: reina@recruitexpress.com.sg

EA License No: 99C4599

• Ensure adherence to quality standards, regulations, and compliance with government, aviation authorities, and customer requirements.
• Liaise with customers, vendors, and suppliers to address non-conformances, conduct root cause analysis, and implement corrective actions.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001, AS9100, NADCAP).
• Review and update quality procedures and control guidelines regularly.

Requirements:

• Degree in Mechanical, Aeronautical Engineering or equivalent.
• At least 5 years of experience with ISO9001/AS9100 QMS and NADCAP standards.
• Strong knowledge in fishbone diagrams, FMEA, and 5-whys analysis.
• Capable of reading and interpreting technical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realize their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

This is a 12 months fixed term contract role.

What will you do?

We are seeking a motivated and technically competent Full Stack Engineer with strong expertise in SharePoint technologies, .NET application development, and cloud migration initiatives. The successful candidate will be responsible for supporting, configuring, developing, and migrating enterprise applications and collaboration platforms from on-premises environments to cloud platforms, including Government Cloud environments where applicable. The ideal candidate should possess hands-on experience in SharePoint administration, migration,  development, and related Microsoft technologies. Experience with Microsoft Power Platform, cloud identity management, and government compliance requirements will be an added advantage.

Key Responsibilities

• Design, develop, configure, and maintain SharePoint solutions and enterprise applications.
• Perform SharePoint migration activities from On-Premises environments to Government Cloud environments.
• Support cloud transformation and modernisation initiatives, including Government Cloud environments.
• Develop, enhance, and maintain  / .NET applications and integrations.
• Support application deployment, troubleshooting, and system enhancements.
• Support workflow automation and digitalisation initiatives using Microsoft technologies.
• Perform system analysis, issue investigation, root cause analysis, and problem resolution.
• Prepare and maintain technical documentation.
• Participate in solution design and continuous improvement initiatives.
• Collaborate with infrastructure, cybersecurity, and business stakeholders to ensure solution alignment and compliance.

Requirements

Educational Qualifications

• Degree or Diploma in Computer Science, Information Technology, Engineering, or related discipline.

Technical Skills & Experience

Mandatory Skills

• Strong hands-on experience with:

• SharePoint Online, SharePoint Subscription Editions (On-Prems).

  SharePoint migration projects (On-Premises to Cloud)

  SharePoint administration, configuration, and support

   / .NET development

• Good working knowledge of:

• Microsoft SQL Server databases i.e. database queries. 

  Basic SQL Server database administration and support (including troubleshooting, backup/restoration, and performance monitoring)

  REST APIs and system integrations

  Microsoft Entra ID (Azure Active Directory / AAD) and identity/access management

  Microsoft 365 ecosystem

Advantageous Skills

Candidates with the following experience will have an added advantage:

• Microsoft Power Platform (Power Apps, Power Automate, Power BI)
• Cloud migration to Government Cloud environments
• Exposure to government security, compliance, and governance requirements
• Good knowledge of secure credential, certificate, and secret management
• Good knowledge of workflow automation and process improvement
• Good knowledge of SFTP (File transfer)
• Exposure to Python scripting, automation, or development or candidates with willingness and ability to learn Python and emerging technologies are encouraged to apply.
• Experience in supporting enterprise or government environments
• Exposure to cloud modernization and digital transformation initiatives

Soft Skills

• Strong analytical and problem-solving skills
• Fast learner with willingness to pick up new technologies and skills
• Good communication and interpersonal skills
• Ability to work independently as well as in a team environment
• Strong sense of ownership and accountability

Benefits

What do we offer in return?

• Fun working environment
• Employee Wellness Program
• To work in Singapore Government Agencies projects
• We provide structured development framework and growth opportunities. (We are a “SHRI 2025 Gold winner” in “Learning & Development; Coaching & Mentoring”)

Why you'll love working with us?

If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join us. We provide all employees with equal opportunities to grow and develop with us. We believe your success is our success.

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at careers@activate.sg

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.