Job Description & Requirements

Experience required

· Plan, organize and arrange daily construction activities.

· Supervise the direct workers and to give instruction to the sub-contractors.Coordinate with land

surveyors and sub-contractors on all setting out works.

· Liaise with QP(S) representative regarding standard of workmanship. To check if the works are

carried out strictly in compliance with the contract specifications and requirements for the purpose of

general quality control.

· Liaise with QP(S) representative for inspection of site works.

· Organize and supervise house-keeping and safety implementation.

· Control material wastage and unproductive deployment of workers.

· Report daily manpower and machinery to the Project Manager.

· Follow up and ensure environmental, safety and health policy compliance.

· Follow up and implement logistic planning set out by Planning Manager

· Work as purchaser to source for supplier, issue PO and prepare supplier payment application

Qualification requirements or equivalent

· Diploma/Degree holder in Construction/Building or related discipline.

· Positive personality and good team player.

· Meticulous and responsible.

· Able to multi task and work in tight schedules.

Job Description

· Plan, organize, supervise and liaise closely with operation team and sub-contractors on all lifting activities.

· Overall in-charge for preparing lifting and erection plan for all the Gantry Cranes.

· Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all subcontractor for any lifting activities.

· Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.

· Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure.

· Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis. Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and subcontractors

Job Requirements:

Minimum five (5) years of engineering experience with Degree in Civil Engineering recognized by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or Recognized Degree in the relevant field subject to the acceptance of the Engineer, and at least three (3) years of experience in the construction supervision of building project.

The Lifting Engineer shall manage all heavy lifting of construction materials, including ensuring concreting works are safely carried out In compliance with the Rapid Transit System Regulations, and no lifting works shall pose safety risks to operating railway at all times.

Must have a Lifting Engineer certificate from The Institute of Engineers Singapore, 5-Day Course for Appointed Person - Lifting Operations

Key Responsibilities

Participation in Industry Standards and Technical Engagement

· Participate in technical discussions and meetings related to AI-RAN Alliance, 3GPP, O-RAN, and other relevant industry organizations.

· Track the latest technological developments in AI-RAN, 6G, and wireless communications.

AI-RAN Core Algorithm Research and Development

· Lead the research, design, and development of core AI-RAN algorithms.

Technology Strategy and Product Delivery

· Contribute to technology roadmap planning and drive the commercialization and deployment of innovative solutions.

Cross-Functional and Customer Collaboration

· Collaborate effectively with internal cross-functional teams and external customers to deliver technical solutions.

Patent Development and Advanced Research

· Conduct forward-looking technology research and contribute to patent applications and intellectual property development.

---

Qualifications

· Solid foundation in wireless communications and algorithm development, with strong knowledge of 4G/5G NR, 3GPP specifications, and O-RAN architecture.

· Familiarity with AI technologies, including machine learning and deep learning.

· Strong technical innovation capability and system architecture design skills.

· Excellent communication skills in both English and Chinese, with the ability to participate in international technical exchanges and standardization activities.

· Experience with telecom operators, network equipment vendors, or the telecommunications industry is preferred.

· Minimum of 5 years of relevant experience in related fields.

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Site Engineer

Job Description

This position is mainly responsible for on-site construction supervision, engineering coordination, progress monitoring, quality verification, and testing/inspection support for semiconductor facility engineering projects.

The scope of work includes civil construction stages, M&E installation, instrumentation and control wiring, signal cable installation, control panel installation, PLC / SCADA / GMS system testing, and project handover activities.

The role is primarily responsible for ensuring contractors’ works comply with drawings, specifications, project schedules, and project requirements, while supporting the engineering team in site management and project delivery.

Key Responsibilities

1. Supervise on-site construction activities, monitor work progress, and ensure quality compliance.
2. Coordinate work arrangements among clients, main contractors, subcontractors, and site personnel.
3. Ensure site works are carried out according to approved drawings, specifications, and project requirements.
4. Conduct daily site inspections to monitor manpower attendance, construction progress, material deliveries, and site conditions.
5. Assist in site measurements, inspections, testing, defect tracking, and project completion verification.
6. Prepare daily site reports, photo records, and progress updates in accordance with company and client requirements.
7. Perform any other site supervision, coordination, and follow-up duties assigned by management.

Job Requirements

1. Candidates with experience in site management, construction supervision, engineering coordination, or project execution are preferred.
2. Basic knowledge of M&E systems, instrumentation and control, ELV systems, communication systems, PLC / SCADA, GMS, or facility systems is an advantage.
3. Ability to understand basic construction drawings, single-line diagrams, control wiring diagrams, and I/O Lists is preferred.
4. Able to supervise contractors in site installation, cable pulling, cable checking, testing, system commissioning, and defect rectification works.
5. Good communication and coordination skills to liaise with clients, main contractors, subcontractors, and site teams.
6. Positive working attitude, responsible, and proactive in tracking site issues, project progress, and defect rectification status.
7. Familiar with Microsoft Office, Excel, photo documentation, and site reporting preparation is preferred.
8. Candidates with experience in Singapore construction sites, semiconductor plants, cleanroom environments, facility systems, or M&E / instrumentation projects will have an added advantage.

Certifications & Preferred Qualifications

Candidates with any of the following certifications, training, or relevant experience will have an advantage:

1. Electrical licenses or certifications related to electrical engineering, instrumentation, ELV systems, or communication cabling.
2. Singapore Licensed Electrical Worker (LEW), or relevant Electrical Technician / Electrical Engineer qualifications.
3. Experience with GMS, Gas Detector systems, 4–20mA signals, Modbus, Ethernet/IP, OPC, or SCADA systems is highly preferred.

Nature of Work

This role mainly focuses on site supervision, engineering coordination, progress tracking, quality verification, defect rectification follow-up, and testing/inspection support.

Candidates should possess basic engineering judgment to ensure contractors’ works comply with drawings, specifications, and project requirements.

WORK LOCATION
Site in Tampines (VSMC)

Please send your cv to joan@jtpc.com.tw

We are looking for an experienced professional to oversee the operation and maintenance of building systems, cryogenic equipment, and related infrastructure in support of Quantum computer operations in Singapore. This position plays a key role in ensuring the safe, reliable, and efficient performance of facility utilities and support systems. The ideal candidate will have a strong background in mechanical and facilities engineering, along with hands-on experience managing complex building systems in laboratory, semiconductor, or chemical manufacturing environments. They should be comfortable working in a fast-paced setting and capable of effectively navigating operational challenges.

Key Responsibilities:

Facility System Operations, Maintenance & Project Support:
•    Monitor, operate, and maintain facility systems including HVAC, chilled water, compressed air, vacuum, gas distribution, cryogenics and plumbing systems.
•    Monitor facility performance, identify inefficiencies, and implement improvements to optimize reliability, capacity, and energy usage.
•    Troubleshoot system issues, perform root cause analysis, and implement corrective and preventive actions.
•    Develop and execute preventive and predictive maintenance programs for critical facility systems.
•    Manage and coordinate contractors, vendors, and service providers for maintenance, repairs, and capital projects.
•    Develop and maintain facility documentation including SOPs, and maintenance records.
•    Track and manage utility usage, sustainability initiatives, and cost-reduction efforts.
•    Support installation, commissioning, and startup of new equipment and facility infrastructure.
•    Support local as well as global facilities upgrades, expansions, and capital projects including scope definition, budgeting, scheduling, and execution.
•    Manage spare parts, consumables, and critical inventory to ensure availability of materials for maintenance and operations, including coordination of procurement, receiving, inspection, and stock optimization.

Compliance & Safety:
•    Collaborate with HSE to ensure compliance with safety standards, codes, and regulations 
•    Support compliance with environmental obligations under NEA where applicable
•    Adhere to site security protocols, including export control access procedures and Technology Control Plan requirements.
•    Participate in audits, inspections, and continuous improvement initiatives.

Cross-Functional Collaboration
•    Collaborate with HSE to ensure compliance with safety standards, codes, and regulations
•    Support compliance with environmental obligations under NEA where applicable
•    Adhere to site security protocols, including export control access procedures and Technology Control Plan requirements
•    Participate in audits, inspections, and continuous improvement initiatives

Must Have:
•    Bachelor’s degree in STEM with minimum 5+ years of experience in engineering, building system support or related area

We value:
•    Solid knowledge of HVAC, mechanical, cryogenic, and utility systems 
•    Hands-on experience with gas systems, cryogenics, vacuum systems, or specialty utilities 
•    Proven experience in developing maintenance strategies and troubleshooting facility equipment 
•    Familiarity with CMMS and Building Management Systems (BMS) 
•    Strong understanding of applicable safety codes and regulatory standards 
•    Excellent analytical thinking and problem-solving abilities 
•    Effective communication skills with the ability to work collaboratively in a team environment 
•    Experience in industrial, semiconductor, chemical manufacturing, laboratory, or other high-tech settings 
•    Demonstrated project management experience supporting facility upgrades or capital projects 

Job Description

• Support network infrastructure projects, provide support to resolve network incidents and issues, provide post-cutover support for various projects as directed by IT Network team.
• Participate in project meetings, discussions, and hand over of projects. Including draft, review and submit project related documents/reports/ metrics as and when required.
• Troubleshoot project related issues and resolve such issues, manage and monitor system utilization and performance during pre-project and post-project cutover and any other tasks or works as and when requested and assigned by the Company.
• Work closely with project teams to understand network requirements and objectives, ensuring seamless integration of network infrastructure within the integrated resort. –
• Provide comprehensive support and administration for the entire project, encompassing Cisco routers, switches, and other network devices.
• Implement and manage network solutions to support project initiatives, prioritizing scalability, performance, and robust security. -Configure and optimize network devices, including routers and switches.
• Configure Multicasting Protocols to ensure efficient multicast traffic distribution.
• Conduct thorough network assessments, identifying potential improvements and upgrades to align with project goals.

Key Qualifications/Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Network Engineer, preferably in project-oriented environments
• Strong knowledge of network protocols, technologies, and architectures (e.g., OSPF, BGP, IP Multicast, Policy Routing).
• Experience in Layer 3 Routing and Layer 2 Switching, with strong expertise in installing, configuring, and troubleshooting Cisco devices.
• Experience with network infrastructure design and implementation, including LAN/WAN, data center, and cloud networks.
• Skilled in deploying Layer-2 technologies like VLANs, VTP,STP, RSTP, Inter-VLAN routing, VLAN Trunking, Ether Channels, VLAN access-maps, and port security.
• Solid experience in switching-related tasks, including implementing VLANs, VTP, RSTP, STP, and port security.
• Familiarity with network security principles, including firewalls, IDS, NAC, and access control.

Company Overview

WEE-BUILT PTE. LTD.

Job Summary

Lead and coordinate new and existing projects by managing resources, schedules, budgets, and client relationships to drive successful project delivery and business growth.

Responsibilities

• Manage overall project execution by coordinating manpower allocation, project requirements, and meeting attendance to ensure timely progress.
• Prepare, discuss, and report project schedules, cash flow, and budgets to management for informed decision-making.
• Track and report weekly project completion status to monitor progress and identify risks.
• Forecast and report monthly project revenue, expenses, and key performance metrics to support financial planning.
• Define and assign project roles to team members based on project requirements, timelines, and budget constraints.
• Determine and allocate necessary resources including staffing, software, hardware, equipment, and facilities according to project specifications.
• Identify and pursue opportunities to enhance customer satisfaction and strengthen client relationships through proactive communication.
• Communicate effectively with clients to understand their needs and evaluate alternative business solutions.
• Lead project teams to prioritize approved project tasks by analyzing strategic importance, outstanding tasks, obstacles, budget, and deadlines.
• Establish, document, and communicate comprehensive schedules for all project phases to ensure alignment and transparency.

Required competencies and certifications

• Degree in Civil & Structural Engineering or equivalent.
• Minimum of 3 years of relevant project management experience.

Preferred competencies and qualifications

• Demonstrated ability to collaborate effectively as a team player with strong analytical and communication skills.

Job position (Ref. No. R1012313)

at our location in Singapore

As a Software Engineer within HR Singapore, you will strive to deliver Digital Products and Services hosted on Cloud Platforms that delight customers and users. Ready to be flexible and proactive, whilst being comfortable with learning a new domain, concepts and techniques. You will be working with AGILE methodologies, where knowledge of Cloud technologies, Data Analytics, Site Reliability and DevSecOps principles will be an asset to the team.

Focusing on our Digital Products, you will be working collaboratively in an international context to ensure development and support of the solution. From UX design, clean coding, QA, deployment on cloud platform and service delivery you will be directly contributing to all aspects of defining and delivery core new products for the business.

You will enjoy having these responsibilities:

• Development, testing, validation, demonstration and operational of Software and System solutions/services, including provisioning, packaging, deployment and administration.
• Delivery of high-quality best-practice clean code via CICD Pipelines
• Management and maintenance of the platform deployments with DevSecOps approaches
• Utilization of Cloud platform to meet the project requirements with cybersecurity implications identification
• Work in an agile, cross-functional multinational team, actively engaging to support the success of the team
• To think out of the box to contribute to solving complex technical integration problems and to work collaboratively with the rest of the team to build a shared approach consensus.
• Work closely with Product Owner to defined and cost estimates feature and overall releases required for Bids.
• Collaborate with Functional Manager, developing yours and the team’s competencies.
• Contributes in co-engineering activities to ensure consistent implementation of the global strategy. 

You have:

• Bachelor's Degree in Software Engineering, Computer Engineering, Computer Science or equivalent with a minimum of 5 years of experience or a Master’s degree in Computer Science or Information Technology with 3+ years of experience
• Cloud and related technologies Certifications are desirable.

Essential Skills/Experience

• Strong knowledge of virtualization and containerization, cloud hosting (eg. AZURE), clustered deployment orchestration (eg. Kubernetes), containers (eg. Docker) and Pivotal Cloud Foundry
• Strong experience with large data storage and analytics platforms (Datalake) and data manipulation tooling, e.g. Kibana, Elasicsearch/ELK, Spark, etc.
• Experience deploying tool chains for CI/CD and automated SW testing and deployment, with hands-on software design and development experience
• Demonstrated knowledge of Python, SQL, JavaScript & frameworks and similar technologies.
• Knowledgeable of the Agile, DevSecOps and SRE Process and Practices
• Strong Analytics and Data literacy skills,
• Basic network knowledge, including cloud network configuration, layer 2 and 3 network configuration
• Basic knowledge on cyber security, including static and dynamic code scanning, software and hardware hardening, network traffic control, authentication framework,
• Strong knowledge on Linux operating system and shell scripting.

Desirable Skills/Experience

• Possess understanding and previous use of common integration patterns for cloud, web services and public API Gateway deployments, (ingress web-server, web-proxy, load-balancer, firewall, databases, etc.)
• Experience railway signaling, air traffic, avionics or similar critical system domains.
• UX designed experience, specifically Data Analysis, Dashboards and Data Visualization.
• Bonus:
• Experience with Data Engineer/Data Science.
• Experience with Artificial Intelligence (AI) and Machine Learning (ML)

Soft Skills

• Possess learning agility, flexibility and proactivity
• Comfortable with agile teamwork and customer engagement

Job Overview

We are seeking a hands-on Azure Engineer with strong networking expertise to design, implement, and support cloud infrastructure across enterprise environments. This role will play a critical part in ensuring secure, scalable, and high-performing cloud and network architectures aligned with business requirements.

Key Responsibilities

Cloud Infrastructure & Deployment

• Design, deploy, and manage Azure infrastructure including VMs, VNet, storage, and PaaS services
• Implement scalable and resilient cloud solutions aligned to best practices
• Support cloud migration and modernization initiatives

Networking & Connectivity

• Design and manage Azure Virtual Networks (VNet), Subnets, NSG, UDR
• Configure VPN Gateway, ExpressRoute, Load Balancers, Application Gateway
• Ensure secure hybrid connectivity between on-premise and Azure environments
• Troubleshoot network performance, latency, and connectivity issues

Security & Governance

• Implement cloud security controls including Azure Firewall, WAF, DDoS Protection
• Manage identity and access via Azure AD, RBAC, Conditional Access
• Ensure compliance with enterprise security and governance standards

Monitoring & Optimization

• Monitor system performance using Azure Monitor, Log Analytics
• Perform capacity planning, cost optimization, and performance tuning
• Support incident response and root cause analysis

Requirements

• Diploma or Degree in IT, Computer Science, or related field
• 3 years of experience in Azure cloud and networking environments
• Strong knowledge of:

• Azure networking (VNet, VPN, ExpressRoute)

  Network fundamentals (TCP/IP, DNS, routing, firewall)

• Hands-on experience with Azure Portal, CLI, or PowerShell
• Familiarity with hybrid cloud environments
• Azure certifications (e.g. AZ-104, AZ-700) are advantageous

Good to Have

• Experience with multi-cloud (AWS / AliCloud)
• Exposure to Infrastructure as Code (Terraform, ARM templates)
• Knowledge of DevOps practices and CI/CD pipelines

Please send your detailed resume in MS Word format to resume@goldtecHRs.com with

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description

• Operate and maintain various Kannegiesser machines, including Power Tunnel 12 compartment, Presses machine, Dryer, infeed machine, High Power Ironer, Folder, towel folder, single washing machine, and single Dryer.
• Handle advanced equipment such as Super Track (2021), Power Trans Varoi (2021), Water extraction presses (2021), Power Dryer (2021), EMQ, EMR, XFM, and XFM-C.
• Install and designate lighting systems. Install electrical wiring in power and control circuits, including motor control (forward/reverse, Star/Delta, direct-on-line systems).
• Maintain and troubleshoot PLC systems, frequency converter boxes, communication systems (phone and CCTV), and electrical control panels.
• Draft electrical control diagrams
• Proficient in managing and supervising labor on maintenance sites.
• Strong understanding of PLC and electrical wiring systems.
• Skilled in drafting drawings using AutoCAD software.
• Experienced in using engineering hand tools for measurement and calculation.
• Capable of handling projects independently.
• Experienced in troubleshooting electrical instruments.
• Able to install electrical wiring for lighting and power control systems.

Job Requirements

• At least 3 years of relevant work experience in hotel laundry engineering team
• Min. Degree in Electrical, Power engineering
• Strong technical knowledge and practical skills in electrical and PLC system.
• Skilled in AutoCAD software

• 6Days - 8.30 - 6.30 & 24Hours Standy
  
• Excellent in reading and understanding electrical schematic diagram
• Analyse and interpret the technical specifications and blueprints
• Ensure that the project is within the stipulated timeline, budget, quality standard, and high safety
• Knowledgeable of local codes and regulations for electrical building services
• Facilitate the construction and installation of the electrical equipment and its components in accordance with the specifications and standards
• Checks and reviews detailed electrical construction drawings to meet design standards and minimize errors
• Responsible for the analysis, definition, design, construction, testing, installation, modification, and maintenance of automated machines, containing software as the major component
• Perform electrical and electronic conceptual details design work.
• Liaise with clients, consultants, and relevant authorities on their engineering request
• Design, Engineer, and provide optimized solutions to meet project & client requirements
• Support the site team in resolving issues during installation, testing & commissioning
• Any ad-hoc duties assigned by management

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

Join a team responsible for building and enhancing mission-critical digital platforms that support high-impact public services. If you're passionate about software engineering, legacy modernisation, and driving digital transformation, this could be the opportunity for you.

What You'll Do

• Develop, maintain, and enhance enterprise applications across legacy and modern platforms.
• Design and implement new features while ensuring system reliability, scalability, and maintainability.
• Support modernisation initiatives including refactoring, API development, platform upgrades, and architectural improvements.
• Investigate production issues, perform root cause analysis, and contribute to system stability and resilience.
• Collaborate with cross-functional teams to deliver secure, high-quality software solutions.
• Leverage AI-assisted development tools responsibly to improve productivity while maintaining engineering quality and governance.
• Contribute to DevSecOps practices, testing, code reviews, and continuous improvement initiatives.

What We're Looking For

• Degree in Computer Science, Software Engineering, Information Systems, or a related discipline.
• 3–5 years of experience in software engineering, enterprise application development, or application support.
• Strong experience with Java, JavaScript, SQL/PLSQL, JSP, Shell Scripting, or similar technologies.
• Experience working with complex or legacy enterprise systems.
• Familiarity with APIs, databases, system integrations, CI/CD, and software delivery best practices.
• Strong analytical and problem-solving skills with a structured approach to troubleshooting.
• Excellent communication skills and the ability to work with both technical and business stakeholders.

Nice to Have

• Experience in legacy modernisation or technology migration projects.
• Exposure to Spring Boot, Angular, Oracle, Tomcat, WebLogic, IIS, AWS, or similar enterprise technologies.
• Knowledge of DevSecOps, observability, application security, or performance monitoring.
• Experience in regulated or high-availability environments.
• Practical experience using AI tools to accelerate software development responsibly.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

What You Will Do

• Maintain and support wafer test equipment or metrology tool readiness in the fab
• Perform preventive maintenance (PM) and troubleshooting of wafer test equipment
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed
• Tool types: KLA, AMAT, ONTO, or Unity

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• 5 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Round-the-clock monitoring and maintenance of the System (hardware and software) to ensure system uptime in accordance to SLA commitments

Respond to all incident / service calls and be first responder onsite to troubleshoot and resolve incidents including basic repairs or parts replacements

Create / update and track ticket in ticketing tool to closure observing SLA commitments

Escalate, when necessary, in accordance to escalation matrix

Perform regular preventive and corrective maintenance, troubleshooting system hardware and all computer-based systems.

Coordinate and work with third-party suppliers or other contractors to identify the causes of issues e.g. hardware, software, network problems and etc. that may affect the proper functioning of the System.

Liaise and work closely with customers to address service concerns and to solve technical problems.

Work with technical team to resolve more advanced issues when necessary

Perform Install / Move / Add / Change (IMAC) activities as tasked

Ensure all material is properly documented and handed over during shift changes

Perform any ad-hoc duties as assigned

Build sustainable relationships and engage customers by taking the extra mile

Job Requirements

Higher NITEC in Electrical, Electronics, IT or equivalent

Relevant experience in IT system support and hardware maintenance

Experience in electrical/mechanical drawing, service/repair manuals and or diagrams will be added advantage

Basic knowledge in Networking and Database management will be added advantage

Strong communication and interpersonal skills. Self-starter, self-motivated and critical thinker who embraces challenges

Ability to work responsibly, independently and in a team

Able to interact with all levels of people and work under stress

Training will be provided
Working hours

Rotating 12 hours shift or as assigned.

Shift pattern: 3 Days work shift followed by 2 days’ rest, 2 Days work shift followed by 3 days’ rest

2 Months Day shift, followed by 2 months night shift

Ability to travel to other sites during shift may be required.

Responsible for civil and steel structures scopes for building construction works.

- Study tender / construction drawings, specifications, contracts scope of works to understand project requirements.

- Plan, schedule work sequences, prepare Microsoft Project for all task and micro-schedule form throughout the project.

- Perform site inspection and ensure that the work is carried out based on the project specification and construction drawing, consultant, and authority requirement.

- Liaise and coordinate with consultants, client, main contractor, other contractor and authority.

- Provide guidance to supervisors in relation to construction works, ensure progress according to schedule.

- Ensure project is executed according to micro-schedule and timeline.

- Resolve all engineering, technical and project queries from time to time.

- Prepare a report and method statement whenever necessary.

- Prepare progress report, handover report, meeting minutes, TOP/CSC documentation, and other requirement request by client and authority.

- Any other ad-hoc duties assigned related to project

Requirements:

- Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Civil / Structural or equivalent.

- Candidate must possesses Civil, Architectural, Steel Structures and/or related experience.

- At least 5 Year(s) of working experience in the related field is required for this position.

- Required Skill(s): Autocad, Microsoft Office, Microsoft Project.

- Able to work on Saturday.

We are seeking an experienced Design Engineer to support detailed engineering, design development, and project execution activities. The successful candidate will be responsible for preparing engineering drawings, performing design calculations, supporting procurement activities, and ensuring engineering deliverables are completed in accordance with project specifications, industry standards, and schedule requirements.

Key Responsibilities

Engineering & Design

• Execute detailed engineering and design activities to meet project requirements, contractual obligations, and applicable industry standards.
• Prepare and review: P&ID drawings Fabrication drawings Equipment layout drawings Pipe routing drawings Equipment and material datasheets
• Perform: Equipment sizing calculations Pipe sizing calculations Hydraulic calculations Pipe stress analysis Material take-offs (MTO)
• Raise purchase requisitions for equipment and materials.
• Review, verify, and sign off engineering design deliverables.

Project & Technical Support

• Liaise with in-house and overseas design teams to ensure engineering deliverables are completed on schedule.
• Support Project Management and Construction Teams during project execution activities.
• Provide engineering support during testing, commissioning, and start-up activities as required.
• Participate in technical reviews, design discussions, and problem-solving activities.

Procurement & Cost Optimisation

• Evaluate vendor quotations and provide technical recommendations during vendor selection.
• Identify and implement value engineering opportunities to improve efficiency and reduce project costs.
• Support tendering and business development activities by providing engineering input where required.

Qualifications & Requirements

• Bachelor's Degree or Master's Degree in Engineering.
• Minimum 5 years of experience in engineering design and detailed engineering activities within industrial, manufacturing, process, utilities, oil & gas, chemical, energy, or infrastructure projects.
• Strong understanding of engineering drawings, piping systems, equipment layouts, and engineering calculations.
• Experience in equipment sizing, hydraulic calculations, material take-offs, and engineering documentation.
• Highly motivated, proactive, and able to work effectively under pressure and tight project schedules.
• Strong communication and coordination skills with multidisciplinary teams.

Preferred Experience

• Experience supporting construction, testing, commissioning, start-up, or operational activities.
• Proficiency in AutoCAD.
• Familiarity with SAP, Navisworks, Microsoft SharePoint, and Microsoft Teams.
• Advanced proficiency in Microsoft Excel, Word, and PowerPoint.

The Defectivity Line Control Engineer is responsible for controlling defectivity in semiconductor wafer fabrication through daily line monitoring, OOC management, tool excursion response, and cross-functional problem solving. The role supports both routine operations and improvement activities to ensure stable process performance, product quality, and effective industrialization.

Key Responsibilities

• Analyze defect Pareto, defect maps, and characterization data to identify root causes and containment actions.
• Drive tool OOC reduction and lead sporadic defect reduction activities.
• Lead the troubleshooting of defectivity alert and involve in Material Review Board for material assessment and disposition.
• Support troubleshooting of defectivity alerts and escalation of critical issues.
• Work closely with process, equipment, device, quality, and production teams to drive defect reduction and line stability.
• Support technology transfer and industrialization activities to ensure smooth deployment of new products and processes.
• Responsible for setting up, optimizing, maintaining Process Defectivity Systems like Automation system (Auto defect sampling, Auto DOI, DOLI), Defect library.
• Opportunity to involve in deployment of Advanced Defectivity Monitoring system involving AI, Convolution Neural Network (CNN) and deep learning with DIT team and opportunities to learn and apply data analytics.

Skills and Competencies

• Degree in Material Science/Electrical/Electronics/Microelectronics/Mechanical/Physics/Chemistry. 
• Preferred minimum 3 years working experience in semiconductor wafer fabrication industry and good knowledge in Defectivity methodology and knowledge of Defectivity inspection tool. Fresh graduate is welcomed to apply as well.
• Knowledge in Klarity Defects/AceXP/Space/Spotfire and other Defectivity related tool will be an added advantage.
• Strong analytical and problem-solving skills.
• Good understanding of semiconductor wafer fab processes.
• Ability to work across departments and communicate clearly.
• Proactive mindset with strong ownership and teamwork.
• Self-driven and independent with an inquisitive mind.
• Familiar with SPC concept and other problem-solving tools: SPACE, FMEA, 8D, Data mining analysis and AI base on Convolution Neural Network (CNN) will be advantageous.

Responsibilities

• Support commissioning, testing, and validation activities for building automation systems, integrated security systems, fire protection systems, monitoring systems, and M&E infrastructure at client project sites.
• Review engineering drawings, system architecture diagrams, schematics, technical specifications, and design documents to ensure compliance with project requirements.
• Conduct system walkdowns, inspections, mechanical completion verification, and operational readiness assessments.
• Develop and execute commissioning plans, testing procedures, validation protocols, and system verification activities.
• Perform functional testing, integrated system testing, Site Acceptance Testing (SAT), and operational verification of automation and monitoring systems.
• Coordinate with client engineering teams across electrical, mechanical, instrumentation, controls, and software disciplines during project execution.
• Manage punch lists, non-conformances, deviations, corrective actions, and system close-out activities.
• Review vendor documentation, commissioning reports, technical manuals, and equipment/system qualification records.
• Support implementation and testing of remote monitoring systems, command centre platforms, alarm management systems, and AI-enabled monitoring solutions.
• Ensure compliance with applicable industry standards, client specifications, safety requirements, and quality management procedures.
• Prepare commissioning reports, validation summaries, test documentation, and project handover deliverables.
• Participate in client meetings and provide technical support throughout project execution and commissioning phases.
• Support troubleshooting, root cause analysis, and performance optimisation of installed systems.
• Contribute to continuous improvement initiatives in commissioning and validation processes.

Requirements

• Bachelor's degree in engineering, Automation, Instrumentation, Electrical Engineering, Mechanical Engineering, or related discipline.
• 8 – 12 years of experience in commissioning, validation, automation, instrumentation, utilities, or engineering project execution.
• Strong knowledge of automation systems, control systems, instrumentation, utilities, and integrated facility systems.
• Experience reviewing engineering documentation, commissioning procedures, and technical specifications.
• Familiarity with systems such as SCADA, BMS, DeltaV, Siemens PCS7, or equivalent platforms.
• Hands-on experience in commissioning electrical, mechanical, HVAC, utility, or integrated building systems.
• Exposure to large-scale infrastructure, commercial buildings, industrial facilities, or mission-critical environments preferred.
• Strong understanding of quality systems, validation methodologies, and risk-based approaches.
• Experience in system integration, performance testing, and operational readiness execution.
• Strong analytical, troubleshooting, documentation, and coordination skills.
• Ability to work independently and manage multiple project assignments.
• Strong communication and stakeholder management skills.

EA License No: 19C9611
EA Personnel Reg No: R22108807 Liang Syeh Wei (Shevy)