Total 102 Senior Executive job vacancies

Job Description

• Lead and manage the eletrical engineering design works.
• Prepare and review the deisgn of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and eletrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specificaions and design standard are met.
• Prepare all relevant checklists for installation, testing and commissioning works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cablnig works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system anaylsis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• WIll be required to work full time at project site.

ASPRI-IPI, the training arm of ASPRI, is a non-profit organisation dedicated to advancing the Process Industry in Singapore. We collaborate with industry leaders, government agencies, and subject matter experts to develop and deliver high-quality training programmes.

Join us on our mission to enhance the skills and safety of the Process Industry workforce, contributing to a safer and more productive industry for Singapore.

Position Overview

The core responsibility of this role is to provide technical and administrative support to ensure delivery of training courses that meet the required standards.

Training Operations

• Plan and coordinate resources and other logistics which are required to support training programmes and day-to-day operations, including technical assistance to ensure smooth operation of technical equipment, tools and training infrastructures.

• Timely uploading and submission of trainee’s course result, issuance of certificates and tracking of controlled documents.

• Collect, analyse and prepare data for submission in accordance with WSQ and Training Centre protocols.

• Support Service Quality Unit on course administrative matters

• Other duties and projects as assigned by the management.

Business Development

• Assist with marketing and outreach programme, including events, seminars and career roadshows designed to enhance the image of the Training Centre and increase course demand.

• Support any other corporate activities or events organise by ASPRI.

Suppliers Management

• Source, negotiate, monitor and feedback on the performance of outsourcing partners and vendors, ensuring compliance to technical specifications and service standards.

Quality Management

• Maintain and track various items under the training quality management system

• Assist management with preparation for audits and other regulatory requirements by Accreditation Bodies.
  

You should possess the following:

• Ability to effectively manage time and schedules under tight deadline and pressure;

• Strong adaptability skill, able to work independently as well as in a team;

• Strong communication skills with good customer service aptitude;

• Proficiency in Microsoft Office and other IT applications

• Willingness to work a flexible schedule, including shift duties on a rotational basis (estimated twice a month for evenings and once a month for weekends), generous perks provided.

• Willing to travel to Jalan Papan, where our training centre is located.
  

• West
• EPC Firm
• 5 Days work week

As a global Organization in design, engineering, procurement, and construction in controlled and regulated environments, our client offers a complete range of services from consulting to the managing of turnkey solutions – delivered to the highest quality and safety standards

About the role;

Reporting to the Lead Process Engineer, you will take responsibility within our project team for the handling of all process challenges from the design phase till the completion and handover to the client.

Job Description

• Lead end-to-end process design from concept, basic, and detailed design phases through to implementation, commissioning, and handover.
• Develop and review key process deliverables, including PFDs, P&IDs, process calculations, equipment sizing, utility balances, and technical specifications.
• Define process system design based on user requirements (URS), including capacity calculations and system architecture for industrial and biopharma applications.
• Conduct and lead design reviews with clients and internal stakeholders, ensuring alignment with project scope, standards, and best practices.
• Support tendering activities, including cost estimation, technical proposal preparation, and evaluation of vendor and subcontractor submissions.
• Review and approve vendor and subcontractor designs, ensuring compliance with project specifications, quality standards, and regulatory requirements.
• Oversee construction, installation, and commissioning activities, ensuring systems are delivered in line with design intent, schedule, and quality expectations.
• Monitor start-up activities, troubleshoot design and site issues, and provide technical solutions to ensure successful system performance.
• Ensure compliance with safety, environmental, and quality standards, including participation in risk assessments and process hazard reviews.
• Mentor junior engineers, support knowledge development, and contribute to continuous improvement, industry engagement, and internal engineering standards.

Job Requirement

• Master´s or Bachelor's degree in Civil, Industrial, Chemical, Mechanical or Bio-Engineering, with a specialization in biotech process and/or Clean Utilities engineering
• 4-5 years of work experience as a process engineer in the mission critical facility industry
• First experience in construction and commissioning / qualification is an asset
• Knowledge in line sizing simulation tools, engineering codes or construction experience is considered an asset
• You are committed, flexible, creative, assertive, communicative, motivated and well-organized
• You like working in a team but you can also function in an independent and safe way, you will be able to solve technical issues

OTHER INFORMATION:

• Location : West
• Working days : 5 days work week
• Salary : $9,000 and Bons

The Company strives to achieve employee satisfaction and provides conducive working environment to all staff.

HOW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ /
or call your friendly Consultant, David, at 6590 9958 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• Well Established Company
• Basic $3000 - $3500 + AWS + VB
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• To act as the primary contact person for liaising and coordinating with internal and external parties ensuring project requirements at customer site are complied
• Lead a team of professionals through all phases of project development, implementation and completion
• Oversees daily project operation, logistics arrangements, and customer’s arrangement
• Project site management and coordination
• Assist in preparing and updating project administration documents, timelines, meeting notes, external contractor briefing notes and status report
• Work closely with customer site operations to understand their requirements and seek clarifications if needed
• To participate in contractor meetings as and when required by customer
• Assist the Manager to manage customer care program. To monitor customer satisfaction, complaints, changes in customer’s people, equipment, processes, materials used and business strategies
• To ensure all ISD personnel and sub-contractors adhere to the safety, Environmental and Health policies and requirements. Review the ISD personnel and sub-contractor work activity and review their JSRA
• Other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Mechanical, Operations, Engineering, or equivalent
• Possessed Minimum Class 3/3A license
• Safety Orientations Course (Working in Power Plant and Construction)
• Supervise Work at Height Course (preferred)
• Candidates with high pressure hydro jetting experience will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As a Principal / Senior Process Engineer, you will play a key role in advancing ASM’s semiconductor process technologies. You’ll leverage your expertise in thin-film deposition and materials characterization to develop innovative solutions for next-generation devices. Your work will directly influence product performance and enable breakthroughs in logic, memory, and power applications.

What you will be working on

• Research, develop, and optimize semiconductor processes focused on Advanced Packaging including depositions (ALD, PECVD, PVD, ECP) and surface preparation.
• Design and conduct complex experiments using DOE and RSM methodologies; interpret and analyze experimental data.
• Develop new films or processes for emerging packaging applications like W2W/D2W Hybrid bonding and perform advanced materials characterization.
• Provide mentorship to Process Engineers and lead technical problem-solving sessions using scientific methods and tools such as Ishikawa diagrams.
• Collaborate with customers and marketing teams to define requirements and execute demonstrations.
• Troubleshoot equipment issues through hands-on engagement and ensure successful product transfer to customers.
• Draft technical papers, generate Intellectual Property, and present findings to professional audiences.
• Travel up to 10% to support remote sites and customer engagements.
• May supervise process engineering technicians and provide input on performance evaluations.

What we are looking for

• Bachelor's, Master’s or PhD in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• Direct experience working on D2W/W2W Hybrid bonding including surface preparation steps
• Minimum 8 years of combined education, research, and work experience in thin-film deposition (ALD, CVD, PECVD) and advanced packaging processes.
• Proficiency in materials characterization techniques (XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM, ellipsometry).
• Knowledge of electrical characterization techniques for CMOS devices.
• Ability to manage complex process development projects, including schedules, budgets, and personnel.

What sets you apart

• Expertise in integration advanced packaging process flows like CoWoS, SoIC, InFO.
• Experience in contributing Process and equipment qualification data towards a full Semiconductor equipment PLC process
• Experience with advanced metrology/Inspection characterization techniques
• Strong communication skills to convey technical concepts clearly.

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

Micron is a global leader in memory and storage solutions, enabling transformative technology that enriches life for all. With over 40 years of innovation, Micron plays a pivotal role in the data-driven economy, where memory and storage are strategic differentiators. We are committed to sustainability, employee well-being, and community support, and we foster a culture of inclusion, collaboration, and continuous improvement. 

Job Summary 

Main Responsibilities: 

As a Process Integration Module Engineer in the Process Integration department, you will be responsible for coordinating improvements in Yield, Quality, and Output for the NAND Flash production line. Day-to-day responsibilities include but not limit to crafting and analyzing process experiments, teaming with YE and PQA to investigate yield and quality problems, and working with production and process engineering teams to ensure the smooth operation of the fab. 

Responsibilities and Tasks 

• Collaborate with multi-functional teams from PIE, Process & Equipment Engineering, WLR, TD to improve product yields and reliability within your assigned process loop. 

• Communicate module related issues to the Fab engineering and leadership teams. 

• Design, execute, and analyze experiments to improve fab process, yield, and quality. 

• Collect and interpret complex data to optimize Fab processes and increase yields. 

• Engage and/or lead cross-area engineering teams to tackle process issues. 

• Work closely with global partners to stay ahead of on module related topics and process alignment projects. 

• Collaborate with other PI module owners and sister fabs to drive business process alignment 

• Partner with IE, Process and Equipment Engineering  and Production to better forecast and balance yield, output and process issues 

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

Requirements:

• PhD in Engineering or Science is must.

• Strong analytical, logical, and critical thinking skills 

• Effective communicator, able to collaborate across all levels 

• Growth mindset with a passion for continuous learning 

• Internship or experience in the semiconductor industry is a plus 

• Demonstrated leadership and a track record of impact are highly desirable 

• Interest in and knowledge of the semiconductor industry and Micron is preferred.

• Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value 

• Ability to apply baseline digital fluency and role appropriate AI literacy to use AI enabled tools responsibly and effectively for research, analysis, content creation, problem solving, operational tasks, and achieving business outcomes.

What to Expect  

Micron is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other protected factor. 

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 
   

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 
   

Working location: 

• 1, North Coast Drive, Singapore 757432 

Job Responsibilities

• Conduct performance reviews with drivers to improve their service performance
• Identify recalcitrant drivers and take appropriate actions to deal with drivers, including termination of their service
• To assist in any media & govt sector enquiry on driver
• To assist in repo of taxi
• Any other adhoc duties

Job Requirements

• Minimally GCE O or A Levels
• Computer literate
• Good knowledge in investigation job
• Candidates with a driving license and Taxi Vocational License will be advantageous
• Able to lead the team

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades.

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including coordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

The Operations Executive is responsible for coordinating construction activities with efficient logistics planning to ensure timely project execution. The role involves managing material flow, vendor coordination, site support, and ensuring compliance with project schedules, quality standards, and cost controls.

Roles & Responsibilities:

Plan and manage the procurement, transportation, and delivery of construction materials to project sites.

Coordinate with suppliers, transporters, and warehouse teams to ensure uninterrupted material availability.

Monitor inventory levels and maintain optimal stock to avoid project delays.

Work closely with site engineers and project managers to understand material and equipment requirements.

Ensure timely mobilization of machinery, tools, and manpower.

Track daily site activities and support operational requirements.

Liaise with vendors and subcontractors for material supply and service delivery.

Evaluate vendor performance based on cost, quality, and timelines.

Negotiate logistics-related costs and contracts where required.

Maintain records of purchase orders, delivery notes, invoices, and logistics documentation.

Ensure compliance with safety standards, company policies, and local regulatory requirements.

Monitor logistics and operational expenses to ensure cost efficiency.

Identify opportunities for cost reduction in transportation and procurements

Act as a communication bridge between procurement, warehouse, and site teams.

Provide regular updates on material status, delays, and operational issues.

Education:

Bachelor’s degree / Diploma in Logistics Management, Supply Chain Management, or related field.

Additional skills

Strong understanding of supply chain and logistics processes in construction projects.

Good coordination and multitasking ability in fast-paced environments.

Proficiency in MS Excel, ERP systems, or inventory management tools.

Strong communication and negotiation skills.

Our vision is to transform how the world uses information to enrich life for all. 

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. 

Position Overview 

Acts as a technical authority in 3D NAND Advanced thin film development, setting strategic direction and leading multi-functional initiatives. Drives department-wide impact by architecting solutions, accelerating innovation adoption, and influencing technical standards. Engages in global projects and mentors engineers to elevate technical excellence. 

Key Responsibilities 

• Define technical strategy and lead multi-functional projects in structural and electric film development. 

• Architect solutions and promote innovative technologies across teams. 

• Influence technical standards and drive process improvements. 

• Lead advanced process development, fixing, and integration. 

• Mentor engineers and foster technical growth. 

• Participate in global collaborations aligned with Micron’s engineering expectations. 

• Integrate unit processes into full module packages and validate within and cross-module interactions, device/process linkages via wafer-level electricals. 

• Drive complex problem solving across process/structure/hardware/device interactions—root cause analysis, FMEA, SPC, and corrective actions that recover window with no yield trade-off. 

• Utilize advanced characterization (SIMS, XPS, TEM, EDX/EELS, electrical stress testing, TDS) to correlate process parameters to device performance; derive correlation models that predict reliability and scaling behavior. 

• Lead multi-functional teams and vendor engagements to push hardware/process capability, set achievements, and secure resources. 

• Mentor engineers via structured training, case studies, and hands-on development; contribute to Micron’s mentoring programs and help build SME pipelines for Advanced Thin Films. 

• Publish internal papers, BKMs, and present to senior leadership; uphold Micron’s TLP tenets: Innovate, Focus, Impact, Influence, Lead, Mentor. 

Technical Expertise: 

• Advanced proficiency in thin film processing (Plasma Enhanced CVD, Thermal CVD, ALD). 

• Hands-on experience with structural and electric film hardware and equipment optimization (dielectric and carbon based films). 

• Hardware optimization: Precursor delivery & temperature control, chamber matching/segregation, batch vs single wafer trade-offs, metrology hooks. 

• Strong understanding of process-mechanical-device interactions, reliability modeling, and 3D NAND scaling. 

• Skilled in advanced characterization techniques (SIMS, XPS, TEM, electrical stress testing) and correlating process parameters to structural and device performance. 

• Proven ability to lead technical problem-solving and support engineers developing their skills. 

Requirements :

PhD or equivalent in Materials Science, Chemical Engineering, Physics, Chemistry, Electrical Engineering, or related field. 

15 to 20 years of experience in Thin Film research and development for NAND process specifically plasma and thermal CVD for dielectric (including highK and lowK) and carbon-based depositions. 

Demonstrated leadership in multi-functional development and vendor collaboration. 

Proven track record in architecting solutions, process-device correlation, and mentoring engineers—aligned to Micron’s SMTS leadership expectations. 

Industry : Automotive

MNC company headquartered in North America

Responsibilities:
· Meet Departmental goals on Cost, Responsiveness &Quality objectives

· Develop and establish work instructions, routing, and workmanship standards

· Track & manage CAPEX spending within the allocated budget

· Establish preventive maintenance and calibration of production equipment

· Supervise and train subordinates and implements company policy

· Drive LEAN opportunities on manufacturing lines

· Provide an area of technology expertise

· Provide technical resource & training to staff

· Lead new product/process start-ups/transfers and change management

· Lead the planning and executing yield /quality /process /UPH /machine /OEE improvement initiatives

· Lead in developing and promoting new technologies and processes

· Lead engineering team to improve manufacturing system / processes

Additionalinformation :

►     Primary

–  Propose manufacturing process & investments for business quotes

–  Design, develop and implement processes, equipment,jigs and fixtures for manufacturing of new/redesign products

–  Support new product development (ADP, PDP) withmanufacturing expertise especially in Overmold

–  Transfer new/redesign/VAVE programs to production

►     Major Accountability

–  Plan project manufacturing process tasks

–  Develop and establish work instructions, routing, and workmanship standards

–  Install and commission new equipment

– Track& manage CAPEX spending within the allocated budget

Requirements:
· Degree Holder in Mechanical Engineering/Electrical and Electronic Engineering/ Production/Manufacturing Engineering

· Minimum of 12 years of working experience, with 8 years of relevant experience in Manufacturing Process

· Proficient oral and written communication Skills

· Time Management Skills

· Analytical problem-solving Skills

· Decision making Skills

Job ID : 9349WY94

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to swathi.dhar@peopleprofilers.com

Only shortlisted candidates will be notified.

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747   

EA Licence Number: 02C4944

Reg. Number: R1111371

EA Personnel: Swathi Dhar

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities:

• Conduct performance reviews with drivers to improve their service performance
• Identify recalcitrant drivers and take appropriate actions to deal with drivers, including termination of their service
• To assist in repo of Taxi
• Any other adhoc duties as assigned

Job Requirements

• Minimally GCE 'O' or GCE 'A' Level
• Computer Literate
• Good knowledge in investigation job
• Candidates who possess a driving license and Taxi Vocational License will be advantageous
• Team Player

JOB DESCRIPTION

• Assist in reviewing existing workflows and processes
• Support documentation of standard operating procedures
• Identify inefficiencies and improvement opportunities
• Track implementation of process enhancements
• Assist in data collection and reporting
• Coordinate with teams on process changes
• Support digitalisation initiatives
• Gain exposure to business optimisation projects

JOB REQUIREMENTS

• Diploma and above
• Training will be provided
• Strong analytical and organisational skills
• Comfortable working with structured processes
• Curious and improvement-driven mindset

EA License Number: 25C2980

Disclaimer:

By applying, you consent to the collection and use of your personal data for recruitment purposes in accordance with Singapore’s PDPA. Your application may be considered for this and other suitable roles.

Your Job

As a Senior Process Engineer in the Outsource Department, your primary purpose is to drive quality, yield, and productivity improvements. You will be responsible for the release of new products to manufacturing, resolving issues that impact the smooth running of parts, and leading machine and process improvements. Your role also includes asset tracking and supervising a team of Engineers and technicians to foster a culture of continuous improvement in the quality system, achieving set goals.

Our Team

You will work within the Data-Com and Specialty Solutions Division, collaborating with a network of assembly subcontractors, vendors, and suppliers. Your interaction with these contacts is crucial to ensure seamless project transfers and adherence to quality and capacity requirements.

What You Will Do

• Lead quality, yield, and productivity improvements, ensuring smooth product releases to manufacturing and resolving any issues affecting part production.
• Design and develop production processes for new product launches at subcontractor locations, including setting up lines, process flow, and conducting process capability studies.
• Collaborate with subcontractors to allocate resources for project transfers, ensuring capacity and quality requirements are met.
• Prepare requisition plans for machines, equipment, and other production needs for new projects or sample production.
• Analyze production line efficiency, ensuring safety compliance and adherence to quality and environmental management procedures.
• Identify opportunities for process improvements and implement changes to optimize production efficiency and product quality.
• Introduce new solutions and technologies in production process design, utilizing Lean and Six Sigma methodologies.
• Conduct defect analysis and propose improvement activities to enhance product quality.
• Ensure 100% asset accuracy at subcontractor locations.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum 8 years of experience as a Process Engineer in a manufacturing environment.
• Proficient in process improvement and quality systems.
• Ability to perceive directional errors and propose effective solutions.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Knowledge of Six Sigma (advantageous but not necessary) and quality tools such as FMEA and 5Why.
• Familiarity with IATF16949 standards.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving  innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. 

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Key Responsibilities:

• Prepare Daily Sales Report

• Process RMA – manage full cycle of return goods from customers

• Input sales orders; issue Delivery Orders and invoices; ensure data accuracy

• Provide proforma invoices to the Sales Coordinator for payment purposes

• Prepare shipping arrangements and coordinate delivery schedules

• Monitor and update inventory stock movements and price records in the system

• Input Purchase Orders and send to factories, ensuring data accuracy

• Liaise with the Logistics Department to ensure timely deliveries

• Upkeep and maintain a proper filing system

• Perform other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Business Administration, Logistics, or a related discipline

• Minimum 3 years of relevant working experience in a similar role

• Proficient in MS Office applications, particularly Excel

• Strong interpersonal and communication skills

• Experience in the same industry and/or handling Letters of Credit is an advantage

• Comfortable and adaptable to ongoing system implementation and process changes

How to Apply

Interested applicants, kindly click on “APPLY NOW”

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Key Responsibilities:

• Prepare Daily Sales Report

• Process RMA – manage full cycle of return goods from customers

• Input sales orders; issue Delivery Orders and invoices; ensure data accuracy

• Provide proforma invoices to the Sales Coordinator for payment purposes

• Prepare shipping arrangements and coordinate delivery schedules

• Monitor and update inventory stock movements and price records in the system

• Input Purchase Orders and send to factories, ensuring data accuracy

• Liaise with the Logistics Department to ensure timely deliveries

• Upkeep and maintain a proper filing system

• Perform other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Business Administration, Logistics, or a related discipline

• Minimum 3 years of relevant working experience in a similar role

• Proficient in MS Office applications, particularly Excel

• Strong interpersonal and communication skills

• Experience in the same industry and/or handling Letters of Credit is an advantage

• Comfortable and adaptable to ongoing system implementation and process changes

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or submit your resume to ref70@trustrecruit.com.sg

Please include the following information:

-         Reason for leaving

-         Expected Salary

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed tosafeguarding your personal data in accordance with the Personal Data ProtectionAct (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Bong Cheong Leong (Alan)

EA Personnel Reg No: R25158271

Responsibilities :

• Meet Departmental goals on Cost,Responsiveness & Quality objectives
• Develop and establish workinstructions, routing, and workmanship standards
• Track & manage CAPEXspending within the allocated budget
• Establish preventive maintenanceand calibration of production equipment
• Supervise and train subordinatesand implements company policy
• Drive LEAN opportunities onmanufacturing lines
• Provide an area of technologyexpertise
• Install and commission newequipment
• Provide technical resource &training to staff
• Lead new product development / processstart-ups / transfers and change management
• Lead the planning and executingyield / quality / process / UPH / machine / OEE improvement initiatives
• Lead in developing and promotingnew technologies and processes
• Plan and lead engineering team to improve manufacturing system / processes

Requirements :

• Degree in Engineering
• 10years of relevant experience
•  Strong experience in Manufacturing Process
• Good written and communication skills
• Possess strong time management, analytical problem-solving and decision making skills
• Able to start work in short notice

Company Overview / Employee Value Proposition

ST AEROSPACE ENGINES PTE LTD

Job Summary

Lead technical functions for engine and product repairs, driving quality improvements and process innovations within Engines MRO environment. Collaborate with authorities and stakeholders to ensure compliance and operational excellence.

Responsibilities

• Lead repair engine products/platform technical functions to ensure effective maintenance and quality outcomes
• Provide technical support by resolving manual discrepancies and proposing out-of-manual repair solutions for mature repairs
• Review and interpret publications from OEMs and customers (ESM, SB, IC, industrial specifications) to maintain repair standards
• Design, review, and manage RFQ processes for production repair fixtures, jigs, and tools to optimize repair operations
• Conduct tooling and consumable equivalency reviews to validate repair resources
• Perform First Article inspections on new repairs to verify compliance and readiness
• Execute capability setup and declaration for new repairs, equipment, or processes for regulatory submission
• Draft and amend technical worksheets to document repair procedures accurately
• Lead or assist investigations into engine/product quality failures by conducting root cause analysis and implementing corrective and preventive actions
• Manage repair special processes, providing technical support to resolve repair or process quality issues related to equipment, parameters, or manuals
• Review process-related publications from OEMs and customers (ESM, SPM, IC, industrial specifications) to ensure process compliance
• Generate and govern process parameters and identify improvements to drive cost savings and efficiency
• Maintain and control in-house process specifications to uphold quality standards
• Prepare maintenance procedures (FMM) for new equipment to ensure operational reliability
• Develop aviation Hazard Identification and Risk Assessments (HIRA) for new processes to mitigate risks
• Lead or assist investigations into process quality failures or industrial accidents by performing root cause analysis and following up on corrective and preventive measures
• Liaise with regulatory authorities (e.g., NEA) to ensure process requirements are met and maintained

Required competencies and certifications

• Degree in Mechanical, Aerospace, or Aeronautical Engineering
• Knowledge of FAA 45 / EASA 145 regulations
• Understanding of regulatory NDT requirements

Preferred competencies and qualifications

• Min. 3 to 5 years of experience in Propulsion Engines and Components MRO environment
• Strong fundamentals in engineering drawing interpretation
• Understanding of repair processes
• Strong analytical, communication, and interpersonal skills
• Demonstrated high degree of initiative

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus and our people's experience in delivering consistent quality results for our clients over the past 20 years have been key to our success to date.

We are currently looking for Senior Process Engineer to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Provide MS&T support from project initiation through start-up, validation, and handover to operations
• Lead or support process design, URS input, and equipment selection during project phase
• Support technology transfer into GMP manufacturing facilities
• Ensure process intent is maintained through engineering, commissioning, qualification, and PPQ
• Provide MS&T support during FAT, SAT, IQ/OQ/PQ, and start-up activities
• Review and support batch records, protocols, deviations, and investigations
• Act as a technical interface between MS&T, Engineering, CQV, Manufacturing, and QA
• Support process troubleshooting, optimisation, and operational readiness
• Work within GMP biopharmaceutical project environments

We are only considering Singaporeans & Singapore permanent residents for this role.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth(careers@pes-international.com).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Responsibilities:

• Conduct Process engineering and design, including process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Create Process design philosophies and operating guides
• Collaborate on Concept Studies, Front- End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 7 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects
• In-depth understanding of process design, heat and material balance, and P&IDs
• Preference will be given to candidates with Lead / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

Job Responsibilities:

• Lead Process Engineering and design, including process configuration and optimization studies
• Perform Process simulations and prepare Process/Utility Flow Diagrams, Heat and Material Balance and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides
• Collaborate on Concept studies, Feasibility reports, Front-End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 15 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects - Concept studies, Front-End Engineering Design (FEED), and detailed design projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Preference given to candidates with Lead Engineer / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

Summary

Todevelop and optimize AOI and reflow process technologies to ensure stable massproduction and high product quality in advanced packaging lines, and to supportcustomer and internal quality requirements.

Job

•          Develop AOI inspection conditions and perform defect analysis for bump, RDL,and TSV processes

•          Operate and optimize 2D/3D AOI systems and inspection parameters

•          Configure AOI inspection algorithms for new product designs

•          Set up process conditions and equipment configurations for new packages andproduction lines

•          Optimize reflow parameters and temperature profiles

•          Analyze solder/micro bump quality and implement improvements

•          Conduct root cause analysis and implement corrective actions for process issues

•          Support customer quality requirements through technical evaluation anddocumentation

•          Supports mass production and quality control in the advanced semiconductorpackaging process

•          Contributes to defect reduction, process stability, and customer satisfaction

•          Drives yield and reliability improvements in AOI and reflow process areas

Requirement:

•          Bachelor’s degree or higher in Engineering or Science (e.g., Material Science,Chemical Engineering, Electronics)

•          Minimum 3 years of experience in AOI or reflow process in semiconductor backend

•          Ability to establish process conditions and optimize parameters

•          Knowledge of inspection or reflow/soldering principles

•          Experience in advanced packaging process such as 2.5D, fan-out and flip-chip a plus

•          Familiarity with quality tools such as APQP, FMEA and 8D methodology

•          Hand-on experience with major AOI equipment(e.g., KLA, onto, Camtek)

•          Experience in developing inspection criteria and technologies for parameterssuch as co-planarity, tilt, and voids.

All Successful candidates can expect a very competitive remuneration package and acomprehensive range of benefits.

Pleaseemail your resume in a detailed MS Word format to joyce@peopleprofilers.com stating

1)Current Drawn

2)Expecting Salary

3)Date Available

4)Reason to Leave each job:

Weregret that only shortlisted candidates will be notified

JoyceKoh Ai Leng

PeopleProfilers Pte Ltd

20Cecil St, #08-09, PLUS Building, Singapore 049705

Tel:6950 9737

www.peopleprofilers.com

EALicense Number: 02C4944

EAPersonnel Reg nos R1110618

Job ID: 5WYXW433