Total 152 Senior Executive job vacancies

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

KEY ACCOUNTABILITIES:

The DP Technician is primarily responsible for performing routine preventive maintenance, predictive maintenance, unplanned repairs, and daily inspections on DP-area equipment, along with other equipment lifecycle management tasks assigned by superior, to ensure stable and reliable equipment operation.

Project Construction, CQV and Startup Phase:

• Support installation, commissioning, equipment start-up activities, and execution of FAT/SAT and IOQ.
• Support commissioning test, punch list closures, deviation/variations resolutions, and change controls related to packing equipment.
• Support for start-up batches, technical troubleshooting, and first-of-a-kind process runs.
• Support technical clarifications, engineering changes, and ensure documentation completion.

Operational Phase:

• Responsible for performing daily preventive maintenance, predictive maintenance, and routine inspections on DP-area equipment, ensuring scheduled maintenance is completed as planned.
• Responsible for resolving unplanned equipment failures with prioritized rapid response to minimize downtime; coordinate remote assistance with vendors when required.
• Troubleshoot technical issues during equipment operation, document Breakdown Analysis (BDA) and lessons learned for equipment-related problems.
• Provide technical support during internal audits, FDA/EMA/HSA inspections, and client audits.
• Support deviation investigations, CAPA development, change control, periodic reviews, and risk assessments (HAZOP, FMEA, CMMS updates).
• Ensure timely and accurate updates of system documentation (SOPs, Maximo job plans, equipment files).
• Continuously identify and eliminate potential audit risks to achieve audit readiness as a routine practice.
• Other tasks assigned by superior.

REQUIREMENTS: 

• Must be flexible to work in a 24/7 shift rotation.
• New graduates with a bachelor's degree or higher, 2 years or above relevant maintenance experience in pharmaceutical manufacturing is preferred.
• Good knowledge of GMP requirements and international standards.
• Good analytical, troubleshooting capabilities.
• Proficiency in English (written and spoken).

Working Hours:
Office Hours
5.5 Days Work Week
There will be heavy On-call duties

Role Scope:
• Provide nursing care for cardiovascular lab patients
• Assist in diagnostic and interventional procedures
• Monitor patients pre- and post-procedure
• Maintain clinical documentation and patient safety standards
• Support doctors and clinical team during procedures

Interested candidates kindly send in your resume to wendykhoo@recruitexpress.com.sg

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

The Pharmacy Technician will assist the Pharmacists to prepare and dispense medications.

Job Responsibilities

Operational

• Ensure medicines are topped up regularly to facilitate smooth dispensing process
• Accurately pack and dispense all prescriptions according to set standards and guidelines
• Counsel all patients according to Good Dispensing Guidelines.
• Understand basic drug regimens and alert pharmacists/prescribers on possible interactions.
• Promptly report to Pharmacy Executive or Pharmacists all problems and patients’ complaints.
• Provide specialised pharmacy counselling to patients so as to improve drug usage and therapeutic outcome.
• Provide professional and courteous service to all patients/customers.

Administration & Housekeeping

• Maintain and conduct regular checks on the equipment used in the pharmacy, e.g. refrigerators, weighing machines, computers, printers, fax machine, etc.
• Ensure proper housekeeping of the pharmacy premises and maintain a high standard of hygiene and cleanliness at the work area and storerooms.
• Ensure that dispensing consumables are topped up at the dispensing counters daily.

Inventory

• Monitor and replenish of stocks and any other items (e.g. patient information leaflets)
• Check the expiry and condition of pharmacy stocks at specified frequency.

IT & Automation

• Involve in the repackaging process and conduct quality control checks.
• Monitor the stock status of the repackaged medications and ensure the replenishment of stocks promptly.
• Monitor IT/Automation equipment to ensure that they are in working condition and to feedback to supervisor on malfunction issues.

Quality Improvement & Assurance

• Participate and assist in implementation of quality assurance, quality improvement projects and activities.
• Suggest improvement to workflow and processes.

Job Requirements

• Fresh Diploma Graduate in Pharmaceutical Sciences/ Certified Pharmacy Technician Course/ Foreign Bachelor of Pharmacy
• Pharmacy Assistant Job Track: Diploma in Pharmacy with at least 3 years of experience in clinical setting
• Possess excellent customer service skills and has good interpersonal skills
• Good team player and self-motivated.

Working Hours
5.5 days’ work week (non-shift)

Work Location

National University Polyclinics (NUP) - Include Tengah which is targeted to commence operation in Early 2026

Company Overview:

SerayaEngi is a company in Singapore specializing in gas detection, control and automation, water quality monitoring, and wastewater sampling solutions. We are committed to providing innovative and sustainable solutions to meet the evolving needs of our clients. As we continue to grow, we seek a dedicated and skilled Senior Technician (6-12 Months Contract) to join our team.

Job Responsibilities:

• Attend site jobs to service and maintain gas detection systems, water monitoring instrumentation, and wastewater autosamplers.
• Perform in-house repairs and calibrations for returned gas detectors.
• Efficiently manage and issue service reports, ensuring accurate bookkeeping.
• Maintained workshop cleanliness and ensured materials were tidy and organized post-job completion.
• Work flexibly to meet customer needs, including early site visits or extended hours for urgent tasks.

Requirements:

• Minimum ITE in Engineering or a related field.
• Proficiency in English and strong computer skills, including Microsoft Office Suite (Outlook, Excel, Word).
• Ability to work independently with minimal supervision, demonstrating problem-solving skills and initiative.
• Commitment to maintaining a clean and organized work environment.
• Flexibility in work hours to accommodate early site visits or extended hours as needed.

Working Hours:

• Monday to Friday, 8:00 AM to 5:00 PM.
• Rest days: Saturday and Sunday.
• Note: Business needs may require flexibility in working hours.

Application Process: Interested candidates should submit their resume and a cover letter highlighting their relevant experience and why they are a good fit for this position.

SerayaEngi is an equal-opportunity employer, and we encourage applications from all qualified individuals.

Responsibilities:

• Implement chemical and physical testing methods and SOPs.
• Lead new instrument setup, method development, and validation.
• Plan testing capacity based on internal and external needs.
• Investigate and report laboratory measurement deviations.
• Prepare quarterly, monthly, and special analytical reports.
• Support production troubleshooting with appropriate lab solutions.
• Coordinate correlation and round-robin testing across sites.

Requirements:

• Bachelor’s degree in Chemical Process, Applied Science, Chemistry, or Physics.
• Minimum 2 years of lab experience in semiconductor or manufacturing environment.
• Strong knowledge of analytical methods, especially trace metals analysis.
• Familiar with GLP, ISO/IEC 17025, and MSA is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for operations, maintenance, engineering aspects of Instrumentation & Control (ELV) systems and insfrastructure. 
• Manage daily operations to ensure systems are operating in optimal conditions.
• Respond to and perform troubleshooting for all system failures or deficiencies.
• Respond to Issues, Complaints and Queries in a timely fashion, keeping relevant stakeholders abreast.
• Plan and manage maintenance activities in accordance to OEM or regulatory requirements.
• Manage vendors/contractors on outsourced services to meet the fulfillment of contract terms and agreement.
• Involvement in facilities related projects such as Facilities Upgrading, Improvement Projects and Tool Hook-Up. Close liaison with consultants, authorities, contractors, stakeholders and etc to ensure seamless and timely completion of projects.
• Prepare RFQ / tender documents for all purchase requests.
• Compliance to EHS and regulatory requirements for all activities carried out.
• Active contribution in energy conservation program and initiatives.

Qualifications and work experiences

• An engineering degree. Diploma / ITE cert holders with many years of relevant working experience may be considered too.
• Min. 3 years of relevant work experience preferably in a wafer-fab or similar industry.
• Good experience in electrical, ELV and building automation systems.
• Project management skills; Familiar with government procurement policies and procedures is a major plus
• Good working knowledge on other facilities for e.g. HVAC, mechanical systems typical in a wafer-fab is a plus.
• Familiar with the local codes from BCA, URA, SCDF/FSB, NEA and other statutory requirements
• Analytical skills to trouble-shoot basic facilities systems.
• Able to work independently

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Job Description

• Industry/ Organization Type: Manufacturing – Air-conditioning
• Position Title: Junior / Senior Aircon Technician
• Working Location: Islandwide (office at Jurong West)
• Working Hours: 5.5 days, Mon - Fri (8.30am – 5.30pm) Sat (8.30am – 12.30pm)
• Salary Package: Up to $2600 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Install, inspect, maintain, and repair commercial and residential air conditioning systems.
• Conduct regular preventive and corrective maintenance on air conditioning units.
• Diagnose and fix electrical and mechanical issues.
• Execute repairs such as replacing compressors and fan coil motors.
• Advise customers on repair needs and enhancements.
• Provide comprehensive servicing including chemical washes and general maintenance.
• Adhere to appliance standards and health and safety regulations.
• Report daily activities to the direct manager.
• Undertake additional tasks as assigned by the supervisor.

APPLY NOW!!!

• Candidates without experience are welcome to apply. Training will be provided.
• Valid Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75698 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing – Air-conditioning
• Position Title: Junior / Senior Aircon Technician
• Working Location: Islandwide (office at Jurong West)
• Working Hours: 5.5 days, Mon - Fri (8.30am – 5.30pm) Sat (8.30am – 12.30pm)
• Salary Package: Up to $2600 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Install, inspect, maintain, and repair commercial and residential air conditioning systems.
• Conduct regular preventive and corrective maintenance on air conditioning units.
• Diagnose and fix electrical and mechanical issues.
• Execute repairs such as replacing compressors and fan coil motors.
• Advise customers on repair needs and enhancements.
• Provide comprehensive servicing including chemical washes and general maintenance.
• Adhere to appliance standards and health and safety regulations.
• Report daily activities to the direct manager.
• Undertake additional tasks as assigned by the supervisor.

APPLY NOW!!!

• Candidates without experience are welcome to apply. Training will be provided.
• Valid Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75698 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

The upcoming Eastern General Hospital (EGH) seeks to provide excellent healthcare centred on each person. When operational, EGH will offer comprehensive clinical specialties across emergency, inpatient, andoutpatient services.

EGH envisions itself as a great hospital for the community, and a great workplace for staff. We will harness innovative technologies in patient care, and journey closely with patients and the community. As an employer of choice, we empower staff in their careers. Together, EGH strives to enable the community, and staff to lead healthier, more fulfilling lives

This role supports the EGH Pharmacy in delivering pharmaceutical services at EGH. The Pharmacy Technician will assist pharmacists and pharmacy supervisors in the provision of pharmaceutical care, ensuring safe, accurate,and timely distribution of medications. The role involves interacting withpatients, caregivers, healthcare professionals, and other hospital staff to support continuity of care and achieve optimal patient outcomes.

Candidatesare expected to:

• Process prescriptions & medication orders accurately
• Dispense & distribute medications under the supervision of pharmacists
• Operate & troubleshoot automation systems supporting medication supply & delivery
• Assist in compounding non-sterile extemporaneous pharmaceutical products
• Manage drug inventories, conduct stock checks, and monitor expiry dates
• Maintain housekeeping standards appropriate to pharmacies
• Ensure equipment are used and maintained appropriately
• Support medication safety practices and report dispensing errorsor near misses.
• Participate in quality improvement initiatives and relevant projects
• Assist in training/train new pharmacy technicians and interns
• Contribute to the growth of EGH, and EGH Pharmacy through relevant activities

Requirements

• Educational qualifications:

o  Diploma in Pharmaceutical Science from a local polytechnic, or

o  Pharmacy Technician Course Certificate (from the Pharmaceutical Society of Singapore), or

o  Foreign-trained pharmacist with at least 2 years of relevant experience

• Strong attention to detail and ability to work in a fast-paced environment
• Good communication and teamwork skills

Responsibilities

· Perform overhead cranes, gantry cranes, monorail cranes electrical installation and troubleshooting task, repairs and parts replacement to resolve related site issues

· Recommendation of part replacement to ensure continuous operation of the equipment

· Coordinate and liaise with Project Engineer/Manager and respective supervisor on tasks and works relating to the project

· Responsible for doing control panel and any other works related to Electrical duties

· Ensure compliance with relevant standard

· Ensure compliance with company’s Quality Management Systems

· Working closely with Supervisor and Mechanical team to get the job done

· Ensure service and work readiness during office works hours and after hours

· Other ad-hoc duties as assigned

Requirement

Diploma/Degree in Electrical/Electronic

Minimum 2 to 3 years in the Crane industry

Knowledge of crane troubleshooting, various brands of inverters, PLC system.

Ability to generate Electrical drawings in accordance to Singapore standards a plus

Holders of Driving Licence Class 3

Company’s Profile:

Our client is a leading public healthcare institution that provides seamless, team-based care across all stages of a patient’s health journey. Serving a diverse community, they are committed to innovation, collaboration, and using technology to deliver person-centered, holistic care. Awarded as one of the Best Employers in 2025, they are looking for qualified individuals to join their dynamic environment dedicated to improving lives within the community.

Work location: West side polyclinics

Job Responsibilities:

• Process medication orders/prescriptions for both inpatient and outpatient
• Picking, packing and labelling in accordance with stipulated policies, guidelines and department standard operating procedures
• Perform billing functions
• Maintain the cleanliness of the pharmacy and ward areas where drugs are stored
• Ensure stocks are stocked up properly and tidily according to First-Expiry-First-Out (FEFO) requirement and stipulated storage condition
• Perform topping up of omnicell ward stock in the respective wards
• Ensure correct receiving of goods
• Secondary repackaging/redressing
• Carry out cycle counts and stock takes periodically according to SOPs
• Dispensing of medications to patients in accordance with stipulated policies, guidelines and department standard operating procedures

Requirements:

• Possess Diploma in Pharmaceutical Science OR Certified Pharmacy Technician Certification (CPTC)
• Pharmacy Technician experience in outpatient pharmacy settings
• Any clinic experience will be a strong advantage

Interested candidates may whatsapp your resume to 8977 7062. Only shortlisted applicants will be contacted.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Cassie Chan | R2197426

EnviroDynamics Solutions Pte Ltd | EA No: 12C6285

Roles & Responsibilities

1. Oversee overall logistic operations

2. Schedule of time in and time out of vehicles daily

3. Ensure that vehicles are timely delivered to customers

4. Welding jobs

5. Producing and manufacturing of Company’s products

6. Ensure that all workshop workers are adhere to safety standards

7. React in time for emergencies; for example non-delivery and accidents, and report to the management immediately

8. Assist in all logistics matters

9. Any other duties as may assign from time to time

Responsibilities

1. Developing and implementing mechanical designs and welding procedures for new products or product improvements.
2. Analyzing and troubleshooting mechanical and welding problems, and recommending appropriate solutions.
3. Conducting tests and experiments to validate designs and procedures.
4. Managing projects and coordinating with cross-functional teams to ensure timely completion of tasks.
5. Providing technical support to production teams and assisting with equipment maintenance and repair.
6. Mentoring and training junior technicians and engineers.

Requirements

1. Strong knowledge of welding processes, metallurgy, and welding standards.

2. Excellent problem-solving skills and the ability to work independently or in a team.

3. Good communication and interpersonal skills to collaborate with colleagues and stakeholders.

4. Familiarity with relevant regulations and safety requirements.

Heavy Commercial Vehicle Senior Technician(Basic 3000 + OT+ Incentive: Gross 4000-6000)

Location: 23 Jalan Buroh (Nearest MRT Joo Koon)

We are seeking a skilled heavy vehicle and machinery repair senior technician/ foreman to join our team. The ideal candidate will be responsible for the repair and maintenance of various heavy vehicles and machinery, ensuring they operate efficiently and safely.

Responsibilities:

Perform routine maintenance tasks on heavy vehicles and machinery, including inspections, oil changes, and filter replacements

Diagnose mechanical, electrical, and hydraulic issues and determine appropriate repair solutions

Conduct repairs on engines, transmissions, brakes, and other components as needed

Utilize metal welding and fabrication skills to repair and modify vehicle/machinery parts

Perform preventative maintenance to avoid future breakdowns and ensure equipment longevity

Follow safety procedures and guidelines to ensure a safe working environment

Perform ad-hoc duties as per manager's instructions.

Requirements:

Proven experience as a heavy vehicle and machinery repair technician or similar role

Proficiency in metal welding and fabrication techniques

Strong mechanical aptitude and troubleshooting skills

Familiarity with diagnostic tools and equipment

Ability to work independently and as part of a team

Benefits Summary:

• Up $2800 + Bonus + Benefits
• 5 Days work week
• Working Location: West
• MNC with good working environment

Responsibilities:

• Troubleshoot, repair and service hydraulic equipment
• Operate and maintain hydraulic pumps, motors, valves, etc
• Provide technical support
• Prepare the service report and liaise with internal department
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6593839640

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH

Registration No: R1658602

EA License No: 20C0278

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Provide technical manufacturing support to Operations and Engineering.

Key Responsibilities:
• Set-up and execute feasibility studies, experiments, and tests - both creating and following established protocols - to develop findings for the validation and improvement of equipment and manufacturing processes/methods based on engineering principles; analyze results, make recommendations, and develop reports for Engineering review. Operate a variety of test equipment to assess characteristics of the manufacturing environment
• Consult with Engineers, Technicians, and Assemblers on processes to execute experiments and/or production runs. Support related to equipment investigations, testing, objective evidence of product dispositions and rework support work necessary.
• Review documentation and take appropriate actions to ensure that information is appropriately catalogued and follow through to validation and qualification of equipment, including transferring information to appropriate locations, e.g., ECRs, SOPs, drawings, and tooling, for Engineering approval
• Utilize manufacturing software (e.g., JDE, QMS,PLM) to update documentation in systems
• Follow through with development of training and documentation materials, based on collaboration with Engineering, including identifying opportunities for modification and making recommendations, enabling the seamless knowledge transfer of project and manufacturing processes; applying knowledge of processes to devise process changes in collaboration with Engineering
• May lead projects related to new equipment validation, equipment investigations, testing, objective evidence of product dispositions and rework
• Identify potential improvement opportunities and propose solutions to optimize process and/or equipment, e.g., re-design/design of basic equipment, tools, fixtures, etc. to improve manufacturing processes, for Engineering review
• Provide coaching and guidance to technicians
• Other incidental duties (e.g. report writing and/or data collection)

Education and Experience:
• Diploma or equivalent with 3 years of previous related experience, such as GMP, clean room, medical device, and experience with automated equipment required

Additional Skills:
• Excellent computer skills required, including experience with MS Office Suite; ERP/MRP systems experience preferred
• Ability to read, comprehend, write and speak English, and good communication skills required
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Knowledge of Good Manufacturing and Good Documentation Practices supporting a medical device environment
• Strict attention to detail
• Ability to provide feedback in a professional, direct, and tactful manner
• Must be able to work in a team environment and with minimum supervision
• Proven success adhering to project schedules and managing small projects
• Substantial knowledge of validation and improvement of automated equipment
• Ability to troubleshoot manufacturing equipment
• Knowledge of material compatibility in the proposed use environment
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Responsibilities

• Participate in the maintenance and operation of DTL HV, LV and DC traction power equipment to ensure safety, reliability and availability of the equipment
• Carry out operation, corrective and preventive maintenance works in accordance with the work instruction and procedures

Requirements

• Possess NITEC / Higher Nitec in Electrical Engineering or equivalent, preferably with relevant working experience in maintenance of electrical HV or LV equipment
• Entry level candidates are welcome to apply
• Able to perform permanent night shift / 3 rotating shift
• Able to identify colours
• Good interpersonal skills
• Good team player
• Resourceful, self-motivated and result-oriented

Working Location: Along the stations in Downtown Line.

We regret to inform that only shortlisted applicants will be notified.

By submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: andb. SBST’s retention of your personal data for 2 years for consideration of future job opportunities (where applicable) from the date of submission of application.

LabTechnician

Our client isa MNC chemical manufacturer company. They are currently seeking for Lab Technician.

The role ofthe Lab Technician includes:

·

Conducting of laboratory tests and samples and quality inspections assigned to them by the Supervisor.

·

Raw material process and finished product quality control analysis.

·

Advance maintenance, calibration and troubleshooting of assigned laboratory equipment.

·

Maintenance of chemicals and consumables inventory, preparation and standardization of chemical reagents and waste management.

·

Maintenance of quality records and development of quality procedures.

·

Calibration of equipment.

·

Conduct and contribute to risk assessment, Quality Procedures and Decision making on quality & maintenance.

·

Procurement of materials and budget controls.

·

Implementing QA & Safety Activities.

·

Any other duties as assigned.

Job Requirement:

·

8 years’ experience in conducting Manual Wet Chemistry or Manual Lab Testing.

Interested candidates, please sendyour detailed resume stating Past Employments, including Reasons of Leaving, LastDrawn Salary for the most recent 2 positions (breakdown of basic salary,allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TOINFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly sendin your latest job resume without your NRIC numbers and other ID numbers.
For job resume(s) that contain NRIC numbers and/ or ID details, it may not beprocessed and your job application may be rejected due to improper submissionof job application details. Please refer to the advisory guidelines on the PDPAfor NRIC numbers and other ID numbers.

By sendingyour job resume to us, it shall be deemed that you have agreed and hereby giveyour consent to MANFIELD in collecting, using and/ or disclosing your personaldata for the purpose of accessing and processing your job application and/ orfor future job opportunities within MANFIELD and/ or with the client(s) ofMANFIELD. If you wish to withdraw your consent, please notify us. Kindly visitour company website for more information on the Privacy Policy.

POSITION SUMMARY

• Respond and attend to guest repair requests.
• Communicate with guests/customers to resolve maintenance issues with little to no supervision.
• Perform preventive maintenance on tools and equipment, including cleaning and lubrication.
• Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio).
• Identify, locate, and operate all shut-off valves for equipment.
• Maintain maintenance inventory and requisition parts and supplies as needed.
• Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.
• Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC.
• Display above average engineering operations skills and strong general mechanical ability.
• Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management.
• Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks.
• Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision.
• Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's.
• Use the Lockout/Tagout system before performing any maintenance work.
• Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs.
• Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems.
• Display the ability to train and mentor other engineers as necessary.
• Display ability to perform Engineer on Duty responsibilities, including readings and rounds.

Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.

Our clients take pride in being a one-stop air conditioning service provider catering to all needs for aircon servicing, installation, and repairs in Singapore. Their primary objective is to deliver top-notch aircon services, installations, and repairs promptly, within budget, and with exceptional customer service

They are seeking a Senior Sales Technician to join their young and dynamic team. You must have hands-on experience in installing, maintaining, and repairing cooling systems -  keeping air conditioning units running efficiently and safely. 

You are also expected to:

• Take ownership of the sales process from start to finish to ensure successful deal execution

• Manage order monitoring from placement to delivery site

• Participate in Aircon design phases and value engineering

• Conduct sales activities aimed at achieving targets 

• Provide sound judgment in selecting methodologies and techniques to derive solutions for diagnosing faults and troubleshooting issues

• Ensure timely follow-up management for regular cleaning, servicing (filters, coils), repairs or replace damaged components

• Check and manage refrigerant levels safely, test systems for performance and efficiency

• Advise customers on maintenance and proper usage, 

Requirements

• Candidate must possess at least 5 to 6 years’ experience coming from the same industry – Airconditioning Servicing and Installation

• 3 to 4 years’ experience in Cost Estimating for HVAC installation for commercial/residential projects 

• Good knowledge in working around blueprints for system planning 

• Possess excellent interpersonal and communication skills

• Able to multi-task and possess good project management and presentation skills.

• Possess own vehicle would be a plus