Total 2,293 Senior Executive job vacancies

Job Description

-Supervise and monitor daily construction activities on-site.

-Ensure works are carried out according to approved drawings, specifications, and project schedule.

-Coordinate with consultants, clients, and subcontractors for project-related issues.

-Lead and manage junior engineers and site supervisors.

-Check and verify setting-out, levels, dimensions, and materials.

-Prepare site progress reports, inspection checklists, and daily records.

-Conduct regular site inspections and ensure safety and quality standards are met.

-Solve technical issues and provide on-site solutions when required.

-Attend site meetings and report to Project Manager.

-Liaise with authorities and ensure compliance with regulations, permits, and approvals.

Job Requirements

-Experience: Minimum 5–7 years of relevant site/construction experience.

-Good knowledge of structural and architectural works.

-Familiar with construction standards, codes, and regulations.

-Proficient in AutoCAD, MS Office, and project scheduling tools.

-Strong leadership and team management abilities.

-Good communication and problem-solving skills.

-Able to work under pressure and meet tight deadlines.

You will manage and supervise the construction of road projects, including new roads, expressways, road interchanges, flyovers, underpasses and depressed road structures. You will be responsible for the supervision and completion of projects, ensuring that works are carried out in accordance with the specified quality and safety standards. You will also be involved in the overall project coordination, as well as resolving any technical and contractual issues encountered in the projects.

Requirement:• Knowledge in Civil / Structural Engineering
• At least 2 years relevant experience in a project / construction environment
• Experience in civil / structural design will be an advantage
• Proficient in relevant software programmes for planning and project works
• Pro-active with strong analytical and communication skills
• Those without experience are also welcome to apply

As part of the shortlisting process for the role, you may be required to complete a medical declaration and / or undergo further assessment.

Job Family Definition:

Designs, analyzes, develops, and evaluates thermal systems, electronics packaging, heatsinks, and enclosures for high-density, high-power networking platforms. Conducts thermal feasibility studies, design margin analysis, CFD simulation, and empirical validation testing on new and modified designs. Leads system-level thermal architecture development and assessment, driving design decisions across NPI program phases. Evaluates thermal reliability of materials, components, designs, and manufacturing techniques used in production. Directs and guides junior engineers, support personnel, and external partner organizations in detailed thermal design, lab testing, prototype fabrication, and production tooling development.

Management Level Definition:

Contributions impact technical components of HPE products, solutions, or services regularly and sustainable. Applies advanced subject matter knowledge to solve complex business issues and is regarded as a subject matter expert. Provides expertise and partnership to functional and technical project teams and may participate in cross-functional initiatives. Exercises significant independent judgment to determine best method for achieving objectives. May provide team leadership and mentoring to others.

Responsibilities:

• Lead system-level thermal design, simulation, and validation for high-density, high-power networking platforms — from early concept through mass production — ensuring product performance, quality, and long-term reliability.
• Own the end-to-end thermal development lifecycle: heatsink design, CFD simulation, thermal mockup, in-lab testing, and data analysis.
• Design and validate thermal solutions for electronics enclosures, chassis, line cards.
• Define and execute thermal validation test plans (thermal margin, acoustics, shock/vibration, reliability, safety)
• Drive system-level design tradeoffs in collaboration with mechanical, electrical, power, firmware, and software engineering teams.
• Engage manufacturing partners, suppliers, and external development partners to deliver reliable, cost-effective, and production-ready thermal solutions.
• Represent the thermal team across all phases of large, complex development programs — influencing architecture decisions, managing risks, and driving issue resolution.
• Lead root-cause analysis and corrective actions during builds and qualification.
• Provide technical mentorship and guidance to less-experienced engineers, elevating team capability and design rigor across the organization.

Education and Experience Required:

• Bachelor's or Master's degree in Mechanical Engineering or a related field
• 10+ years of experience in thermal design and electronics packaging
• Demonstrated track record of leading thermal development on networking platforms.

Knowledge and Skills:

• Deep expertise in thermal design and electronics packaging for high-density, high-power systems (data center and networking applications).
• Strong proficiency in CFD simulation tools (FloTHERM), with demonstrated ability to correlate simulation models against lab measurements.
• Solid understanding of system thermal control, including fan selection and fan control methodologies.

• Hands-on experience with thermal test setups and instrumentation: thermocouples, DAQs, environmental/thermal chambers, and metered airflow/pressure benches.
• Ability to develop test automation and data analysis scripts using Python or equivalent scripting languages.

• Proficiency in designing heatsinks, sheet metal structures, plastic components, ducts, and baffles, with working knowledge of associated manufacturing processes and production tooling.
• Experience working closely with vendors and contract manufacturers on design-for-manufacturability and cost optimization.

• Proven technical leadership — independently drives complex, multi-disciplinary projects; manages competing priorities and system-level tradeoffs.
• Drives design innovation and elevates engineering standards across programs.
• Clear communicator — able to clearly present thermal strategies and design proposals to engineering peers and senior leadership.

Impact/Scope:

• Collaborates with peers, junior engineers, technicians and external design partners.
• Typically interacts with high- level Individual Contributors, Managers, Directors and Program Core Teams.
• Leads multiple projects requiring thermal development. Drives design innovation.

Complexity:

• Moderate - High.

(Only Singaporean will be considered)

Job Description:

The DevSecOps Engineer works along with the Project teams to onboard new squads in the DevOps environment. DevSecOps Engineers will guide them for continuous integration, continuous deployment and continuous testing. DevSecOps Engineer works closely with the development team and operation team to create DevOps strategy and toolset that suits the individual squads.

Responsibility:

• Work with the CI/CD engineers to build initial DevSecOps pipeline supporting squads when onboarded to the project
• Overall Support of the Pipeline (Build & Deploy) to ensure seamless deployment
• Customization of existing pipeline and template based on squad requirements
• Build and manage AWS cloud formation scripts to handle configuration management and ensure continuous deployment
• Ensure availability of infrastructure which includes troubleshooting underlying system if applicable
• Coordinate with the infrastructure team on standard updates and ensure those are reflected on a regular basis
• Facilitate induction programs to provide guidance when new squads onboard the project

Skills:

• At least 3 years hands-on experience in building and developing CI/CD pipeline and workflow (Gitlab CI/CD preferred)
• Good hands-on experience on using AWS Cloud Formation scripts for configuration management and application deployment
• At least 3 years experience with AWS platform (EC2, ELB, VPC) in general and tools such as Lambda, RDS, Dynamo DB
• At least 2 years experience in programming, and overall knowledge on one or more of the following programming language (Java, Spring Boot, Node JS, Angular JS, React Native)
• At least 1 year experience working closely with infrastructure. Experience in Linux, Windows, network troubleshooting is a plus
• Experience on working in an Agile environment, in a close collaboration with developers
• Knowledge on continuous integration, test automation, version control, and software configuration management

The incumbent is responsible for providing pre-sales and post-sales support to customers on semiconductor testing; maintaining customer satisfaction so as to maintain or become the preferred tester platform.

Job responsibilities

• Project management, delivery and support of Test Program/Test Library creation, conversion or consultation as required by Customer
• Provide support and consultation for Hardware and Software solutions for Customer Projects and Production requirements
• Post sales consulting and support including Test methodology creation, enhancements and modifications, Test hardware/ software feature recommendations and audit
• Support and debug production issues such as correlation, test time and yield discrepancy, RTE, hang-ups etc
• Delivery of application training, knowledge transfer and skill-up for Customer

Job requirements

• Bachelor’s Degree Electrical and/or Electronics Engineering
• Minimum 7-10 years of working experience in IC testing industry
• Good knowledge of Digital/Mixed signal test methodologies
• Well versed with  Java and C++, script programming, knowledge on 93000 software and debugging tools will be an added advantage
• Good experience in test program development and test floor exposures
• Strong problem solver with good technical capabilities, good communication skill, self-motivated, customer focus and result oriented
• Ability to work independently with minimum supervision
• Occasional travel, sometimes at short notice

Job Description

• Industry/ Organization Type: Engineering Consultant
• Position Title: Senior Design Engineer
• Working Location: Bugis
• Working Hours: 4.5 days (9AM – 7PM or 8AM – 6PM, Staggering Hours)
• Salary Package: Basic $3,000 - $5,000 + Bonus
• Duration: Permanent

Key Responsibilities

• Perform design work for Electrical, Mechanical, and ELV building services installations.
• Prepare calculations and CAD/Revit drawings for Electrical, Mechanical, and ELV building services installations.
• Attend technical meetings for assigned projects.
• Coordinate with Project Engineers for assigned projects.

APPLY NOW!!!

• Diploma or Degree in Electrical Engineering, Mechanical Engineering, or a related discipline.
• Hands-on experience in AutoCAD.
• BIM experience will be an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10102 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

 Supervise, guide, and inspect the on-site installation, testing, and pre-commissioning of all field instruments.

• Manage the site acceptance testing (SAT), QA/QC inspections, and final handover/acceptance of instrumentation systems.

• Review technical drawings, data sheets, and vendor documentation to ensure alignment with process plant requirements.

• Act as the technical point of contact for PLC/DCS integration and troubleshooting.

• Coordinate closely with clients, subcontractors, and vendors to resolve technical issues promptly.

Requirements:

• Process Plant Expertise: Solid understanding of process plant operations, piping & instrumentation diagrams (P&IDs), and safety layouts.

• Control Systems: Proficient in PLC (Programmable Logic Controllers) and DCS (Distributed Control Systems) architectures.

• Equipment Knowledge: Thorough familiarity with field instrument equipment (valves, transmitters, flowmeters, Esd Valve, etc.).

• Site Execution: Proven track record in managing on-site instrument installation, inspection, and formal project acceptance.

•  Other Skills: Technical reporting, documentation, and cross-border client coordination.

• Background: Good in Instrumentation, Control, or Electrical Engineering, with prior experience in large-scale Oil & Gas / LNG EPC projects.

Scope

The primary task of the Senior Technical Engineer is to render product and application-relatedtechnical assistance and support to internal and external customers. You will be working closely with the front-line team and will be involved in the development, implementation, organization, maintenance, and updating of all technical-related matters. The Senior Technical Engineer is expected to be a team player and is responsible to ensure the effectiveness of the Technical team.

Responsibilities (including,but not restricted to)

• Plan, execute, manage and continue to improve the Technical & QA/QC functions.
• Comply, execute, maintain & update QA/QC processes.
• Ensure that QA/QC team meets external and internal audit requirements.
• Support in the development, implementation, organization, and update of technical-related materials.
• Identify, analyze, investigate, propose, and resolve technical and quality issues.
• Conduct root cause analysis, control, and review measures.
• Set clear objectives, evaluate progress, and instill a high-performance culture with a focus on teamwork, service excellence, and ownership for resolving customer issues.
• Develop technical training content and provide training for internal & external customers.
• Ensure high-quality, up-to-date documentation process
• Conduct scheduled audits or surveillance check on existing suppliers.
• Conduct audits to approve and qualify new suppliers for existing and new product range
• Quality assurance on supplier compliance to product requirements and QA/QC standards.
• Obtain new and maintain product certifications aligned with the company’s target markets requirements and business development strategy
• Communicate and coordinate with all product testing and certification parties.
• Continuously learn and improve internal QA/QC capability and competencies.
• Continuously learn about market and competitor product development and performance requirements providing input and tactical direction to the business on technical support and services.
• Ability to translate technical information into marketing lingo, challenging the norm.

Requirements

• Minimum 5 years’ experiences in engineering
• Degree in relevant engineering faculty, preferably mechanical engineering
• Demonstrates strong critical thinking when managing issues by proactively identifying risks and implementing actions to prevent or correct the issues
• Strong market research skills, highly analytical, highly detailed, and an academic
• Committed, hard-working, and able to rough it out
• Self-motivated, proactive, and highly independent
• Strong written and oral communication skills
• Excellent collaboration and interpersonal skills to work with stakeholders at the global level

Other Information:

• Location: Woodlands Close (Singapore - Near Admiralty MRT)
• 5 days of Work (Monday – Friday 9 am to 6 pm)

Role Purpose:

• Progressing all elements of design in-line with the Design Checklist;
• Prepare electrical tender packages including specification and drawings;
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;
• Tendering and estimating of electrical works for projects prior to award;
• Compilation and Review of Operation and Maintenance Dossier for Projects;

Job Responsibilities:

• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor.:

Job Requirements:

• Degree in Electrical Engineering
• 10 years of design experience
• Advanced knowledge of Microsoft Office software like Word, Excel, Outlook, Power Point, PDF document generation and management.
• Knowledge of basic Electrical design concepts in at least one of the following areas:
• Lighting Design
• Cable Calculations
• Short Circuit Calculations
• Basic knowledge of local code of practice for design implementation.

Job Description

• Progressing the design in accordance with the Design Checklist;
• Chairing Sub-contractor progress meetings;
• Chairing Mechanical Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance Engineers to ensure they are aligned with the requirements of the specification;
• Mentoring of an Engineer with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring each System Supervisor is provided with the current and applicable shop and space management drawings;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• In the absence of a Project based Lead Engineer, the Senior Engineer shall assume the role and responsibilities assigned to the Lead Engineer position.

Requirements

• Degree in Mechanical Engineering
• At least 10 years of design and construction experience

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

1. Analyze Module specifications work with developers to coordinate the work, track the progress of the work

2. Translate business requirements into detailed DevOps solution designs.

3. Building and maintaining automation pipelines and workflows (via CI/CD solutions like Jenkins, Bamboo, etc.)

4. Prepare/Review changes to configurable items, which include hardware, software, documentation, etc. It covers

configuration management planning, configuration identification, configuration controls & audits

5. Containerizing applications and managing container clusters and registries. Performing root cause analysis on

defects and outages to prevent recurrences.

6. Lead the planning and execution of system upgrades, migrations, and maintenance activities, minimizing

downtime and disruption to operations

7. Integrating and analyzing application performance metrics and logs using tools like Splunk, Nagios or Dynatrace

8. Handle incident management processes and tools, application monitoring metrics and tooling to generate

reports and take corrective actions

9. Follow standards and best practices to bring operational efficiencies, stability and availability of the system

10. Use continuous delivery practices to evolve and support high-quality software, and bring value to end

customers as early as possible while working in collaborative, value-driven teams to build innovative customer

experiences for enterprise customers

11. Establishing and maintaining effective working relationships, breaking down barriers for the team and both

planning at a higher level and getting into the detail to make things happen when needed.

12. Provide mentorship and guidance to junior engineers.

13. Work with developers to Investigate all reported problems/errors & initiate amendments & testing so that the

system can operate correctly & efficiently

14. Ensure DevOps practices comply with Telecom sector security guidelines

Education and Qualifications

Degree in Computer Science

5-10 Years of experience in

relevant area.

Work Experience

Experience implementing

applications solutions in AWS, Azure

Cloud or Private Cloud

Experience in DevOps practices must

possess ample knowledge and

experience in system automation,

deployment, and implementation.

Experience in handling distributed

data systems and container

architecture. Examples: Elastisearch,

Kubernetes, Cassandra, Hadoop, and

others

Experience working with application

monitoring tools such as Prometheus

or Grafana, understand the different

metrics that go with it and can

generate reports and take corrective

actions.

Experience using scrum-based

software development tools like

JIRA, Bitbucket and confluence.

Responsibilities

• Conduct security assessments, identify risks and gaps, and propose practical improvement plans.
• Support design, evaluation, and implementation of cybersecurity solutions such as EDR, SASE, Zero Trust, and endpoint/network security controls.
• Support proof-of-concept activities, vendor evaluations, technical workshops, and customer discussions.
• Prepare assessment reports, technical documentation, project deliverables, and presentation materials.
• Coordinate with customers, internal teams, and vendors to deliver cybersecurity projects on time and within scope.
• Stay updated on cybersecurity technologies, threats, and best practices to improve service quality.

Requirements

• Minimum 5 years of experience in cybersecurity, security engineering, security assessment, solution implementation, or cybersecurity consulting.
• Experience in security assessment, gap analysis, risk identification, and remediation planning.
• Experience working with customers or stakeholders in consulting, project delivery, or advisory roles.
• ⁠Knowledge and practical experience in one or more areas such as EDR, SASE, Zero Trust, endpoint security, network security, cloud security, vulnerability management, or security governance
• Ability to understand cybersecurity risks and translate technical findings into practical recommendations.
• Ability to explain cybersecurity risks, solutions, and priorities clearly to technical and non-technical audiences.

GMP Recruitment Services (S) Pte Ltd | EA Licence: 09C3051 | VO UYEN AI LINH | Registration No: R22109232 

Senior Project Manager

• Office at: Changi Business Park [Expo MRT]
• Work at project sites 
• Mon to Fri, from 8.30am to 5.15pm
• Salary is up to $11,000 - $13,000

The role is accountable for achieving project objectives across Safety, Environment, Quality, Delivery, and Cost (SEQDC) while ensuring compliance with contractual, statutory, regulatory, and company requirements.

Job Responsibilities:

• Lead and manage all aspects of project execution throughout the project lifecycle, ensuring successful delivery against project objectives and SEQDC targets.
• Provide leadership and direction to project teams, including project managers, engineers, consultants, subcontractors, and suppliers.
• Develop and implement project execution strategies, construction methodologies, resource plans, and delivery programmes.
• Monitor project progress and performance, ensuring milestones, deliverables, and contractual obligations are achieved.
• Drive a strong safety culture and ensure compliance with Workplace Safety and Health (WSH) regulations, environmental requirements, company EHS policies, and project-specific plans.
• Oversee quality management processes to ensure works are executed in accordance with project specifications, applicable standards, and client expectations.
• Manage project budgets, forecasting, procurement, cost control, contract administration, variation management, and commercial risks.
• Identify, assess, and mitigate project risks while implementing effective corrective and preventive actions.
• Ensure all statutory approvals, permits, inspections, and regulatory requirements are obtained and maintained to support project delivery.
• Provide regular project reporting on safety, quality, programme, cost, risks, and overall project performance.
• Lead project commissioning, handover, defect management, and closeout activities.

Job requirements:

• Degree in Civil Engineering, Construction Management, Architecture, or related discipline
• Minimum 15–20 years of relevant construction industry experience, including at least 10 years in project management and senior leadership roles.
• Proven track record of successfully delivering at least two construction projects with individual contract values exceeding S$300 million.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Restaurants & Bars:

· Shikar, Isabel Brasserie, Polo Bar Steakhouse & Cultivate (Maxwell Reserve)

· Whiskey Library & Jazz Club (The Vagabond Club)

· GupShup (The Serangoon House)

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey. (see attached for full Marriott benefits)

- 2 nights yearly staycation in any of the Garcha Group hotels in Singapore.

- 20% off Food/Alcohol Bill at all Garcha Group restaurants and bars

Responsibilities include but are not limited to:

• Review all facilities with an aesthetic eye for detail;
• Be well-organized and able to be hands-on to trouble-shoot and fix issues related air conditioning (Daiken VRV), plumbing, humidity related issues, all M&E issues, service provider management, and optimize efficiency while reducing operating costs.
• "Can-do" attitude with resourcefulness and phenomenal efficiency can set you apart among our candidate pool.
• The goal is to ensure our accommodations is problem-free;
• Managing the upkeep of equipment and supplies to meet health and safety standards;
• Trouble-shoot, plan and coordinate all installations and repairs of (telecommunications, heat, electricity etc.) and refurbishments;
• Hands-on as well as manage the upkeep of buildings, equipment and supplies to meet health and safety standards;
• Inspect buildings’ structures to determine and implement the need for repairs;
• Obtain comparative quotations;
• Review utilities consumption and strive to minimize costs;
• Supervise foreign staff facilities staff (handy-men) and external contractors;
• Control activities like waste disposal, building security etc.;
• Handle insurance plans and service contracts;
• Keep financial and non-financial records;
• Maintain all trackers.
• Any other duties/tasks as requested by management.

Responsibilities:

Responsibilities for this position involve working closely with SOC Design, SW/System, and Chipset PE/PM/PdM to validate Digital SOC chip on ATE, SLT and Bench; collaborate with Test Engineering, SLT, and Bench to develop HVM Test Solution. The role is expected from project planning to execution on Digital SOC development. Cross collaboration work is expected with SW, System, Design, Process and Customer Engineering on power and performance related tests for High Volume Manufacturing. The individuals selected for the positions will need to be able to work in a fast paced and dynamic environment and be passionate about delivering quality work.

Requirements:

Experience in Digital SOC development from planning, silicon validation to High Volume Manufacturing phase. Experience in ATE/SLT test coverage, test HW development, data analytics/ statistics, product reliability qualification (ESD/LU, HTOL and Package Qual), ATE System correlation for power and performance, project updates to upper management and cross functional teams, stakeholder management, and risk management.

Education Requirements:

Min 3 years of related job experience in product, test, product engineering.

Bachelor's/Master’s, Electrical and Electronic Engineering or Computer Engineering 

A. Senior Resident Site Staff with Degree in Architecture (hereinafter referred to as “SRA”)

1. Strategize, oversee and coordinate the overall quality assurance and quality control processes, including enforcement & inspections activities.

2. Liaise, coordinate and cooperate with Other Consultants to resolve on-site design and technical/coordination issues in a timely manner.

3. Carry out the proper and full-time site supervision work for the satisfactory construction and completion of all building works including but not limited to architectural and interior design (ID) works, all in compliancewith the specified requirements in the contracts between the Employer with the Contractor (which includes any subcontractor whether nominated or privately engaged by the Contractor), and in accordance with the relevant building authorities’ rules, regulationsand requirements.

4. Manage and organize the M&E site team to ensure orderliness and coordination of work processes on site. Attend to & provide timely and quality advice to the other Site Staff/ RTO in resolving problems.

5. Review and assign week to week work schedule for the entire site team including ID, Façade, C&S and M&E. Organize with assigned Site Staff/ RTOs to ensure all site diaries and inspection records are kept, consolidated& filed weekly.

6. Liaise with the Other Consultants to ensure that Requests for Information (RFIs) and technical queries from the Contractor are responded in a timely manner.

7. Review contract documents and drawings and highlight if there are any discrepancies between these documents. All discrepancies shall be brought to the attention of the Other Consultants concerned.

8. Seek clarification from the SO/SOR/SORA on any apparent discrepancies between site and contract drawings, specification requirement, approved shop drawing, CSD and room book, etc. before giving any directions to theContractor.

9. Organize the information gathering and compilation, and render assistance to the Other Consultants in the review of the Contractor’s Claims.

10. Report regularly on the overall project status, assist with the preparation of the Certificate of Stage Completion, Progress Reports, design coordination, buildability and quality issues.

11. Review Contractor’s works methodology, remedial details and material submissions and ensure that all installation methods and material used are in accordance with the contract drawings and specifications.

12. Ensure checking & approval of shop drawings, catalogues and samples by the Design-Site Team are executed in a timely manner.

13. Liaise with the Contractor in resolving site installation problems. All problems on site shall be referred immediately to the Other Consultants.

14. Monitor the Contractor’s installation works against the construction programme. In the event of delays, the SRA shall assist the Contractor to mitigate delays but without compromise on quality.

15. Review all Operation and Maintenance Manuals, and coordinate with Employer in handing over of the works/MEP installations to Employer’s assigned maintenance staff.

16. Attend meetings & working sessions as required by the SO/SOR/SORA.

17. Ensure that all incoming and outgoing design, shop, construction and cocoordination drawings are properly recorded, collated and filed.

18. Check the accuracy of all RAOV/RFI to ensure they are recorded, costed and issued appropriately, including all necessary clarification with the QS on the extent of changes.

19. Be able to explain to the Employer when necessary the reasons for the RAOV/RFIs.

20. Check and review the Contractor’s site progress in line with the Other Consultant’s instructions. Conduct site meetings with site staff for updates and coordination of works at specified intervals.

21. Ensure that daily activities are recorded and or any other form of records as required to facilitate the works, are properly maintained on site by site staff.

22. Ensure issuance of defects list and monitor/supervision progress of rectification works are executed.

23. Conduct site check in conjunction with the Employer & Project Managers in assessing dispute claims & variation orders by the Contractor, when necessary.

24. Ensure that the Contractor records accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site.

25. Verify that all constructed works are in accordance with drawings approved by the relevant authorities prior to any such authorities’ inspection.

26. Ensure compliance with widths of all escape routes, stairs, handrails, doors.

27. Ensure compliance to the fire safety standards governed by the Code of Practice for Fire Precautions in Buildings issued by the Singapore Civil Defence Force.

28. Ensure compliance to the relevant Code on Accessibility in the Built Environment as governed by the Building and Construction Authority in Singapore.

29. Assist the Contractor to organise formal inspections required by the relevant Authorities.

30. Ensure that all comments/non-conformance issued by the relevant authorities are addressed and rectified on site within two weeks of receipt.

31. Ensure that all installation works are in accordance with approved methods, and material used is in accordance with contract drawings and specifications.

32. Witness tests carried out by Contractor and record the results, and assisting in testing and commissioning of all works / MEP systems.

33. Attend meetings & working sessions as required by the SO/SOR/SORA.

34. Ensure the accuracy of and endorse on as-built drawing.

About the Spend Squad:

We build products that allow our customers to spend their money anywhere in the world. We currently process about £34 billion annually and issue cards to over 40 countries. We are also building out features which localise the spending experience no matter where you are. 

As a Senior iOS Engineer, you would be responsible for shipping the direct customer touch points on one of Wise's most impactful products and highest growth products.

What you will do: 

You will drive the technical execution of our mobile product, working closely with backend, frontend, and product teams.

Your day-to-day focus will be:

• Lead full, engineer-driven product initiatives. You will be involved in the entire lifecycle of a feature, from inception and technical planning to shipping and scaling.
• Directly support and build out the card product across 5 individual product teams. This includes owning core user flows like card ordering, transacting, 3DS authentication, bill splitting, recurring payments, and dispute resolution.
• Write clean, maintainable code on your platform, advocate for mobile best practices, and collaborate with the wider globally distributed tribe to ensure a seamless mobile experience.

Qualifications

About you:

We are looking for a highly technical, product-passionate iOS engineer who brings:

• Deep experience building, shipping, and maintaining high-performing apps at scale on iOS. 

• Proven experience working with modern iOS UI development (SwiftUI, Swift Concurrency) 

• You don't just build to spec; you have a passion for customer experience. You rely on data to make decisions and actively look for ways to fix customer pain-points.

• The ability to articulate complex, deeply technical concepts to non-technical stakeholders and cross-functional peers.

• Comfortable working in an environment where you can pivot effectively when priorities change, quickly adjusting workflows to meet team objectives.

• Thrives in a globally distributed squad and tribe environment, working as a strong team player who elevates the engineers around them through technical excellence.

What’s in it for you:

•  Influence one of Wise’s most recognisable and high-traffic products.

• We don't just pass down requirements. We ask our iOS engineers to lead product drives and own their technical roadmap.

• Work in a healthy environment built on transparency, ownership, and trust, alongside a very talented group of frontend, backend, and product peers.

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Your role and responsibilities

In this role, you will have the opportunity to act as the technical lead for all engineering activities in assignments. Each day, you will ensure that the activities related to engineering disciplines within the project are executed in an efficient and cost-effective manner. You will also showcase your expertise by providing technical support to commissioning and start-up activities.

The work model for the role is: Onsite

• Leading the ICSS engineering scope across all project phases – FEED, basic engineering, detailed engineering including hardware and software, FAT, pre-commissioning, commissioning and SAT at yards and offshore sites.

• Acting as subject matter expert for all automation systems including – DCS, ESD, F&G and co-ordinate with teams both in-house and at the execution center in the region.

• Interfacing with vendors, EPC contractors, client, and internal stakeholders to ensure system integration and functional compliance in line with project requirements.

• Collaborating with the Project Manager to ensure on-time delivery, adherence to project schedule and budget, and fulfilment of contractual obligations

Qualifications for the role

• Around 10 years of hands on experience handling automation projects within the oil & gas, power industries or offshore

• Experience in handling large size ICSS systems with 25,000+ I/O points or more.

• Proven experience with any of the major ICSS platforms including architecture design, configuration, and integration for offshore projects.

• Experience with ABB 800xA system will be an added advantage.

• A good collaborator and enjoy working in a multi-cultural environment.

• Self-motivated individual with strong English communication skills, eager to build lasting relationships with customers and global stakeholders.

• Bachelor’s degree in engineering or technology with a major in Electrical, Electronics or another relevant discipline.

What's in it for you?
 

We empower you to take initiative, challenge ideas, and lead with confidence. You’ll grow through meaningful work, continuous learning, and support that’s tailored to your goals. Every idea you share and every action you take contributes to something bigger. 

More about us

The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division’s goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence (AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle.

Key Responsibilities:

• Partner with project managers, clients, and the development team to understand user needs, business goals, and technical requirements.

• Create user flows, wireframes, interactive prototypes, and high-fidelity designs for websites, mobile applications, and marketing materials.

• Present and articulate design concepts and solutions to internal teams, stakeholders, and management.

• Identify gaps in user insights, motivations, and pain points to strengthen design strategies.

• Propose and conduct user research initiatives, including usability testing, interviews, and surveys, and translate findings into actionable design recommendations.

• Collaborate with cross-functional teams, including product owners, to ensure solutions are feasible, scalable, and aligned with both user and business needs.

• Ensure all design outputs are visually compelling, intuitive, and consistent with established brand guidelines and design systems.

• Work closely with front-end developers to ensure accurate and high-quality implementation of designs.

• Contribute to front-end development efforts (training will be provided).

Requirements:

• A strong portfolio demonstrating visual design expertise, user-centered design thinking, research capabilities, and analytical skills.

• Proficiency in design tools such as Figma or equivalent platforms.

• Experience gathering requirements through workshops, stakeholder interviews, and research activities.

• Solid understanding of user research methodologies and hands-on experience conducting usability testing.

• Ability to communicate ideas effectively through storytelling, storyboards, mood boards, flowcharts, and presentation decks.

• Strong verbal, written, and visual communication skills with the ability to collaborate across teams.

• Exceptional attention to detail with a commitment to pixel-perfect execution and design system consistency.

• Ability to thrive in a fast-paced environment and manage multiple projects concurrently.

• Strong business acumen with the ability to align design decisions with broader organizational goals.

• Familiarity with Agile and Scrum methodologies is an advantage.

• Experience in project management is a plus.

• Experience in front-end development is a plus.
  

  Work Location: North / Central
  

  (EA Reg No: 20C0312)

  Please email a copy of your detailed resume to kayla@talentsis.com.sg for immediate processing.

  Only shortlisted candidates will be notified.

Skills:

• Bachelor’s degree in Computer Science, Computer Engineering, Computer Systems Networking, Information Systems/Science, or a related discipline
• 5+ years of experience and demonstrated expertise with the administration and operation of the HashiCorp Vault application is a requirement for this role
• You have systems and application management experience on Linux/UNIX platforms
• You have experience with cloud architecture and have built applications in, or migrated applications to, Amazon Web Services AWS or Microsoft Azure
• You have experience with networking, firewalls, and load balancers
• You have experience building automated pipelines and deploying with CI/CD technologies such as Jenkins, Git, Ansible, Chef, Artifactory, AWS Cloud Formation Templates, Terraform, EC2, Lambda, Docker/Kubernetes, and KMS
• You develop advanced, customized workflows and automated processes for/with vendor applications
• You have strong scripting & automation skills, specifically in Python and Ansible
• You have excellent written and verbal communication skills with the ability to present to both technical and business audiences
• You have demonstrated experience in leading small technical teams
• You have the ability to independently perform systems design & architecture work to satisfy technical objectives and meet business requirements

Position Summary

We are seeking a highly motivated Senior Engineer, Assembly to support research and development activities in Photonics IC Packaging. The role involves machine setup, assembly, testing, troubleshooting, and process improvement for advanced photonics packaging applications. The successful candidate will work closely with cross-functional teams to ensure efficient assembly operations, quality performance, and continuous process optimization.

Key Responsibilities

• Perform machine setup, calibration, testing, and mechanical assembly of active devices onto interposers.
• Conduct testing on assembled devices and generate detailed test reports and summaries.
• Troubleshoot assembly-related issues and document findings for failure analysis and corrective actions.
• Coordinate with internal teams to manage incoming materials and ensure readiness for assembly operations.
• Analyze packaging process performance, including yield, manufacturing cost, process specifications, and cycle time.
• Support the planning and execution of continuous improvement initiatives to enhance manufacturing efficiency and product quality.
• Maintain proper documentation of assembly procedures, testing results, and engineering activities.

Qualifications & Requirements

• Diploma, Advanced/Higher/Graduate Diploma, or Bachelor’s Degree in Engineering or a related discipline.
• Minimum 5 years of relevant working experience in the semiconductor industry.
• Hands-on experience with die-assembly tools, flip-chip bonders, and wire bonders is strongly preferred.
• Familiarity with CAD drawing tools is highly advantageous.
• Knowledge of semiconductor wafer packaging and photonics packaging processes is a plus.