Total 2,262 Senior Executive job vacancies

• Implementation, monitoring, assist in reviewing and provide recommendations for improvement of safety on Workplace Safety & Health and Environmental Management Systems at work for the project.
• Advising the project management team on risk analysis, controls, and updates to legislation related to workplace safety, health, and the environment. Monitoring and implementing risk controls to prevent injuries and damage, ensuring standards for fall protection, and promoting the saving, recycling, and reuse of resources, energy, and materials.
• Handle Authorities on all spot check, feedbacks and resident / neighboring estates’ complaints / feedbacks
• Collaborate with the project team to reduce disruption (e.g., noise, dust, traffic).
• Maintain WSHE records and liaise with relevant authorities.
• Identify training needs and conduct WSHE training sessions.
• Establish WSHE programs to promote safety awareness.
• Monitor and improve WSHE performance, including identifying unsafe conditions.
• Advise subcontractors on compliance with safety regulations.
• Conduct routine inspections and audits, ensuring corrective actions are taken.
• Ensure all deficiencies observed during inspections / audits are being follow-up and rectified ASAP.
• Recommend and advise project management on cessation of works that can’t be carried out in safe manner and may cause immediate danger or serious consequences to work site.
• Act as secretary of the site WSHE Committee and ensure monthly committee meetings and weekly coordination meetings are conducted
• Compile weekly and monthly WSHE reports to submit to corporate WSHE department, developer and consultants on a regular basis
• Lead investigations into workplace incidents and recommend preventive measures.
• Issue WSHE instructions, general WSHE correspondences and penalties internally as well as subcontractors
• Schedule and lead WSHE promotion activities for the project sites, including emergency drills, campaigns, mass talks
• Conduct WSH training to relevant personnel to ensure they are equipped with adequate knowledge and raise their safety awareness
• Ensure permit-to-work system is implemented correctly and effectively
• Establish and review regularly WSHE plans such as Noise Management
• Plan, Public Safety Plan, Fall Prevention Plan, Lifting Plans, etc
  Applying of international and local WSHE and occupational safety and health awards
• Mentoring of newcomers (safety personnel) and oversee various Officers
  Safe Management Officers (SMO) - To get appoint as Safe Management Officers (SMO) in accordance to Safe Worksite Criteria.
• To conduct regular inspections and checks to ensure compliance, and to report to the Developer and Builder and document any non-compliance found during the inspections.
• To take immediate action to remedy any non-compliance found during the inspections and checks.
• To keep records of inspections and checks conducted and corrective actions taken.
• To review SMMs if constant non-compliance is detected.
• Perform duties as Fire Safety Manager, including executing the Emergency Response Plan and conducting fire drills.

Requirement

• Possess at least a Diploma in Engineering, Specialist Diploma in WSH
• Must be registered WSHO with MOM, ECO with NEA
• Preferably Five (5) years of safety personnel experience in various construction projects.

Job Responsibilities:

• To conduct pre-inspection with subcon.
• Coordinate and supervise installation works carried out are in accordance to specs, shop drawings, method statements and local codes & regulations.
• To ensure site carry out according to daily site coordination.
• To conduct internal quality pre-inspection with sub-con.
• Inventory check on daily basis.
• Planning and manage site storage facilities, building materials and equipment.
• To manage and liaise with workers
• Control and minimize wastages.
• Ensure work activities are carried out in safe working environment.
• Ability to identify and Resolve any site issues faced at the work site.
• Ability to plan and coordinate inter disciplinary works and shop drawings.
• Receiving structural materials from suppliers.
• To keep site records (daily journal, concrete cubes, DO, etc.).
• Other adhoc duties as assigned by the Immediate Supervisor/ Management.

Job Requirements:

• Minimum of five (5) relevant experience, preferably in private residential projects.
• Willing to travel around project site offices within Singapore.
• Able to work in team and cope in a fast-paced environment.
• Independent, diligent and highly motivated with excellent team spirit.
• Relevant qualification of certificates in structural & architectural discipline (eg. NCCS, BCSS, Safety or Lifting).

• Implementation, monitoring, assist in reviewing and provide recommendations for improvement of safety on Workplace Safety & Health and Environmental Management Systems at work for the project.
• Advising the project management team on risk analysis, controls, and updates to legislation related to workplace safety, health, and the environment. Monitoring and implementing risk controls to prevent injuries and damage, ensuring standards for fall protection, and promoting the saving, recycling, and reuse of resources, energy, and materials.
• Handle Authorities on all spot check, feedbacks and resident / neighboring estates’ complaints / feedbacks
• Collaborate with the project team to reduce disruption (e.g., noise, dust, traffic).
• Maintain WSHE records and liaise with relevant authorities.
• Identify training needs and conduct WSHE training sessions.
• Establish WSHE programs to promote safety awareness.
• Monitor and improve WSHE performance, including identifying unsafe conditions.
• Advise subcontractors on compliance with safety regulations.
• Conduct routine inspections and audits, ensuring corrective actions are taken.
• Ensure all deficiencies observed during inspections / audits are being follow-up and rectified ASAP.
• Recommend and advise project management on cessation of works that can’t be carried out in safe manner and may cause immediate danger or serious consequences to work site.
• Act as secretary of the site WSHE Committee and ensure monthly committee meetings and weekly coordination meetings are conducted
• Compile weekly and monthly WSHE reports to submit to corporate WSHE department, developer and consultants on a regular basis
• Lead investigations into workplace incidents and recommend preventive measures.
• Issue WSHE instructions, general WSHE correspondences and penalties internally as well as subcontractors
• Schedule and lead WSHE promotion activities for the project sites, including emergency drills, campaigns, mass talks
• Conduct WSH training to relevant personnel to ensure they are equipped with adequate knowledge and raise their safety awareness
• Ensure permit-to-work system is implemented correctly and effectively
• Establish and review regularly WSHE plans such as Noise Management
• Plan, Public Safety Plan, Fall Prevention Plan, Lifting Plans, etc
  Applying of international and local WSHE and occupational safety and health awards
• Mentoring of newcomers (safety personnel) and oversee various Officers
  Safe Management Officers (SMO) - To get appoint as Safe Management Officers (SMO) in accordance to Safe Worksite Criteria.
• To conduct regular inspections and checks to ensure compliance, and to report to the Developer and Builder and document any non-compliance found during the inspections.
• To take immediate action to remedy any non-compliance found during the inspections and checks.
• To keep records of inspections and checks conducted and corrective actions taken.
• To review SMMs if constant non-compliance is detected.
• Perform duties as Fire Safety Manager, including executing the Emergency Response Plan and conducting fire drills.

Requirement

• Possess at least a Diploma in Engineering, Specialist Diploma in WSH
• Must be registered WSHO with MOM, ECO with NEA
• Preferably Five (5) years of safety personnel experience in various construction projects.

Job Responsibilities:

• Lead in Site Coordination with all trades.
• Prepare submission of shop drawing / Materials / MOS.
• To ensure work is construct in accordance with contract and drawings.
• Planning of Arch. Works and micro scheduling with other disciplines.
• Liaise with sub-contractors, suppliers and etc.
• Implement and ensure QC plan with Quality and Service Dept.
• Procurement and Monitoring of Arch. related materials.
• To carry out inspection/trade demo/ material testing / mock up
• To ensure tiles/walls lay according to setting out plan.
• To verify VO and prepare back charges.
• Attend sub-con meetings.
• To check and ensure compliance with TOP check list and RI (Arch)
• Attend to archi materials, sample board, trade demo and shop drawings submission and submittal reviews comment from consultants.
• To update Arch. progress with scheduling tools.
• Other adhoc duties as assigned by the Immediate Supervisor/ Management.
• Ensure work activities are carried out in safe working environment.

Job Requirements:

• Diploma/ Degree in Civil or a related discipline recognized by the PE Board.
• Relevant qualification of certificates in structural and architectural discipline (eg: NCCS, BCSS, Safety or Lifting).
• Minimum three (3) years’ of relevant experience.
• Able to lead the sub-contractors to ensure smooth progress of works, high quality standards and minimal defects.
• Preferably completed QM project and registered as Coretrade foremen.
• Good knowledge of archi specs and BCA quality requirements.
• Proficient in Microsoft Office and knowledge of BIM.
• Willing to travel around project site offices within Singapore.

Job Responsibilities:

• Handle full set accounts.
• Handle A/R & A/P.
• Liaise with Auditors and Secretary.
• Preparation of Audit Reports / GST
• Will report to Director and Finance Manager.
• Will include HR & Administration Works

Job Requirements:

• Candidate must possess at least Diploma in Accounting.
• Required language(s): English, Mandarin to communicate effectively with Mandarin speaking associates regarding the scope of work.
• At least 3 Year(s) of working experience in full set accounts.
• Independent and require minimal supervision.

Responsibilities:

-Assist in managing full set of accounts including AP, AR, GL, and bank reconciliations

-Prepare monthly, quarterly, and annual financial statements, including balance sheets, income statements, and cash flow statements

-Ensure timely month-end and year-end closing

-Ensure compliance with accounting standards and regulations

-Handle payroll processing and tax filings

-Assist with budgeting, forecasting, and financial analysis

-Support audits and maintain financial controls

-Manage cash flow, funding, and budget allocation

-Control and manage financial processes, including collections and payments

-Prepare audit schedules and liaise with external auditors

Requirements:

~Degree in Accountancy or a related field

~Knowledge of and experience in applying International and Singapore Financial Reporting Standards

~Knowledge of Singapore GST and corporate tax requirements

~Proficiency with Microsoft Office and accounting software

~Good interpersonal and communication skills

~Ability to work independently and meet tight deadlines

~Able to work at Tuas

whatsapp: 85986715

Job Bacancy:Account cum Admin Executive at a Construction Company

·Working hours: Monday to Friday 9:00am to 6:00pm, and Saturday 9:00am to 1:00 pm

·Work location: ubi road 2

·Salary Range: S$2500 to S$3500 (based on qualifications and experience)

·Benefits: Performance bonuses, Allowances, Festival Angbao, Annual leave

·Qualification: Minimum diploma in accounting and 1 year relevant experience

ACCA diploma or LCCI

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Job ID: 19933

• Location: Tanjong Pagar
• Working hours: 9am - 5.30pm
• Salary: up to $6,000 (Depending on experiences)

Job Description

• Liaise and communicate with contractors, clients and internal stakeholders.
• Prepare sales proposals, quotations, tender documents and contracts based on project requirements.
• Monitor upcoming and ongoing projects for tender opportunities.
• Handle sales inquiries and build long-term business relationships with existing clients and contractors.
• Conduct commercial negotiation with clients for potential and ongoing projects.
• Follow up closely on projects process and completion to ensure delivery within schedule, budget, required quality standards, and regulatory compliance.
• Coordinate with Technical and Operations teams to develop suitable technical solutions and project strategies for clients.
• Work collaboratively across all organizational levels to ensure projects are executed efficiently with appropriate resource utilization.

Job Requirement

• Diploma or Degree in Civil Engineering or equivalent engineering qualification is required.
• 3 to 5 years of relevant experience in sales / project management, preferable within the Construction industry.
• Ability to communicate in Japanese language is required to liase with Japanese speaking counterparts
• Willing to travel to project sites when required.
• Able to commit extended working hours when necessary.
  

Interested applicants, kindly send your updated resume to Joanne (R21101135) Joanne@pasona.com.sg with the email subject header "Job Application for "19933, Sales Engineer / Sales Executive".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Roles & Responsibilities

Responsibilities:

• Develop the project business locally and identify and directly target architects and developers for projects.
• Support local distributors with pricing, catalogues and project specification support
• Achieve annual sales targets and assist in tender for projects
• Assist with market research or other local activities related to market and business development and sales growth
• Promote brand awareness, identify prospective clients, and expand the clientele base for the company with focus on the construction sector
• Take ownership and lead business development efforts in selected market segments
• To execute plans and strategies set by Manager and the company
• Attend to sales enquiries and prepare quotation.

Our esteemed client in the Construction industry is seeking a QAQC Executive/ Engineer to join their dynamic team:

• Employment Type: Permanent
• Position: QAQC Executive/ Engineer
• Location: Islandwide
• Working Hours: 5.5 days, Office Hours
• Salary Package: Up to $6,500 + Bonus

Job Responsibilities:

• Conduct detailed inspections of structural, architectural, and M&E works to ensure all finishes meet project quality standards and are fully prepared for final handovers.
• Oversee subcontractor performance across multiple trades, ensuring all work adheres to technical specifications and managing the prompt rectification of any identified defects.
• Partner closely with site safety teams to support and implement health and safety initiatives, ensuring a proactive approach to site-wide safety culture.
• Maintain strict adherence to the Workplace Safety and Health Act (WSHA), subsidiary legislation, and internal safety management systems to ensure a safe and compliant working environment.

Job Requirements:

• At least 3 years of experience in construction industry.
• Minimum a Degree in Civil Engineering, Building Management or related discipline.
• Able to work in a fast-paced environment.

Ready to apply?Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793 

Manage technology yield and performance of the products. Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment.

Job Requirement:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 3 years of relevant work experience in Etch Equipment with LAM tools experience in the semiconductor industry.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Roles and Responsibilities:

• Assist Senior Engineers and PM on the progress of the project.
• Assist in QAQC inspection
• Ensure the safety on the area that you are in charge with assistance from the safety department.
• Supervise the subcontractor work to make sure that the method and material use is approved.
• Attend progress meeting, coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Site work inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering.
• Coordinate for all submission.
• Produce weekly site progress report and necessary submission.

Roles & Responsibilities

The Engineer Executive is responsible for:

1. Coordinate with production, engineering and warehouse teams.
2. Monitor process improvements, productivity and efficiency.
3. Support daily production and maintenance.
4. Prepare reports and maintain documentation.
5. Ensure workplace safety and quality standards compliance.
6. Perform other ad-hoc duties as assigned.

Key Responsibilities

• Good technical problem solving, troubleshooting and follow-up skills;
• Good team player and able to complete the assigned responsibility;
• Possess great desire to learn and grow with the company;
• Computer literate and know troubleshooting logic and methods.

Requirements

• Diploma in Electronic & Electrical Engineering / Bachelor’s Degree in Electronic Engineering or equivalent
• Minimum 1 - 2 years of experience in electrical / electronic related industry.
• Good communication and interpersonal skills.
• Electrical knowledge, manufacturing experience, process improvement.

Responsibilities:

· Design and coordinate assigned Civil and Structural projects.

· Perform structural analysis and design in building or on anystructures as required by the project.

· Liaise with clients & consultants to meet C&Srequirements.

· Manage and Coordinate to ensure civil and structuralrequirements meet project tender, submission and construction schedule.

Requirements:

· Good degree in Civil / Structural Engineering from a recognizedUniversity

· Preferably 4-5 years working experience in Civil &Structural Consultancy Firm

· Conversant with Building Control Acts & Regulations,Singapore Codes of Practice, Eurocodes and structural programs such as STAAD,TEKLA, ETABS, RAPT, etc

. We regret that this position is open to Singapore Citizens only due to hiring requirements

Responsibilities

·       Lead and execute equipment and process validation activities, including DQ, IQ, OQ, and PQ.

·       Develop, review, and maintain validation protocols and reports, ensuring full compliance with applicable regulatory and quality requirements.

·       Plan and manage preventive and corrective maintenance programs for production equipment, cleanroom systems, utilities, and facility infrastructure.

·       Ensure high equipment availability and reliability, with strict adherence to calibration and maintenance schedules.

·       Troubleshoot and resolve equipment and system issues in a timely manner, ensuring operations remain within defined specifications and regulatory requirements.

·       Drive continuous improvement initiatives to enhance equipment performance, process efficiency, reliability, and overall uptime.

·       Prepare and maintain engineering documentation, including SOPs, work instructions, and maintenance records, ensuring compliance with document control and data integrity requirements.

Requirements

·       Bachelor’s degree or higher in Biomedical Engineering, Life Sciences, Chemical Engineering, or a related discipline.

·       Minimum 5 years of relevant experience in the medical device, pharmaceutical, or other highly regulated manufacturing environments.

·       Hands-on experience in equipment and process validation, as well as equipment and facility maintenance.

·       Experience with process water systems, solution mixing and preparation systems, and cleanroom utilities (including HVAC) is an added advantage.

·       Strong analytical and problem-solving capabilities, with the ability to work both independently and collaboratively within cross-functional teams.

·       Demonstrated sense of ownership and accountability, with the ability to manage multiple priorities effectively in a fast-paced project environment.

- Good Degree in Civil / Structural Engineering from a recognized University

- Minimum 5 years working experience in Civil & Structural Consultancy Firm

- Experience in LTA - Road works would be mandatory

- Familiar with LTA - SDRE, Road alignment design, drainage design, authority submission

- Ability to work independently

• Construction - Main Con (A1)
• Design for Manufacturing and Assembly (DfMA)
• Basic $4000 to $5500 + Bonuses
• Excellent Welfare and Benefits + Career progression
• Working location: North-East (Company Transport Provided)
• Working hours: Monday to Friday (8:30am to 6pm)
• Singapore Building Control Act
• Integrated Digital Delivery (IDD) Framework; BIM (Building Information Modelling)

Job Responsibilities:

To drive the adoption of our DfMA capabilities (e.g., Prefab MEP, PPVC, or Modular Facades) by educating developers, consultants, and main contractors on the value of off-site construction. The primary goal is to secure high-value projects by demonstrating how our DfMA solutions meet BCA Productivity Requirements and reduce on-site manpower.

Business Development

• Proactively identify and engage key stakeholders (Developers, Architects, and MainContractors) for upcoming Government Land Sales (GLS) projects where DfMA is mandated.
• Liaise with the Building and Construction Authority (BCA) and the Specialists Trade Alliance of Singapore (STAS) to ensure regulatory compliance.

Technical Value Selling

• Translate complex DfMA technicalities into business benefits, focusing on Time Savings, Quality Control, and Manpower Reduction.

Tender Strategy

• Collaborate with the pre-construction/BIM team to prepare competitive tender proposals thathighlight Buildability and Constructability scores.

Content Marketing

• Develop case studies and technical assets showcasing successful project deliveries and our factory’s MAS (Manufacturer Accreditation Scheme) status.

Networking

• Represent the company at industry events hosted by SCAL (Singapore Contractors Association) or REDAS

https://redas.com/

Requirements:

• Bachelor’s Degree or Diploma in Civil, Mechanical, or Electrical Engineering, Architecture, Building, or Marketing
• 2–5 years of proven experience in construction sales, prefabricated manufacturing, or technical marketing within the built environment.
• Industry Knowledge: Strong understanding of the Integrated Digital Delivery (IDD) framework and how BIM (Building Information Modelling) integrates with DfMA (Design for Manufacturing and Assembly) processes.
• Regulatory Familiarity: Well-versed in Singapore’s Building Control Act and specific DfMA mandates for various building typologies.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

•      Work experiences and job responsibilities

•      Current and Expected salary

•      Reason for leaving

•      Date of availability

•     Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Handle daily accounting operations including Accounts Payable (AP), Accounts Receivable (AR), bank reconciliation, and fixed assets tracking.
• Review and process employee expense claims and reimbursements in accordance with company policies.
• Maintain petty cash records and manage cash deposits accurately.
• Support monthly financial closing activities and ensure timely completion of accounts.
• Prepare financial reports and assist with other administrative or accounting duties as assigned.

Requirements:

• Diploma in Accounting, Finance, or equivalent
• At least 3 years of accounting experience within the construction industry.
• Proficient in SAP accounting system and general accounting practices.
• Able to work independently with good attention to detail.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities

• Apply statistical tools (SPC, DOE, FDC, ECMS) t optimize equipment performance and robustness.
• Establish and optimize Preventive Maintenance (PM) plans to improve equipment quality, cost, and productivity.
• Work with vendors to resolve equipment issues and improve performance.
• Collaborate with Process and Manufacturing Engineers to address yield, WAT, and operational issues.
• Manage spare parts and consumables inventory to support maintenance based on production forecasts.
• Lead new equipment start-up from facility hookup to production acceptance.
• Drive continuous improvement projects to enhance equipment efficiency, reliability, and cost reduction.
• Set targets to minimize wafer scrap, reduce equipment cost per wafer, and optimize utilization.
• Provide training and guidance to AEs and TAs on troubleshooting, equipment knowledge, and risk assessment.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for issue resolution.
• Develop long-term solutions for recurring hardware and operational issues.
• Create and maintain implant operation SOPs and work instructions.

Job Requirement:

• Degree in Electrical / Electronics / Mechanical /Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 3 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500,VIISTA900, VIISTA HCP, GSD, Axcelis HE/VHE. AMAT XR80.
• Strong logical thinking capability and good analytical skill
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

We are seeking a highly motivated and technically proficient candidate to join our Advanced Material Solutions Division. The candidate will play a key role in the design, development and deployment of electronic and electrical systems, software and embedded firmware in energy storage and power management systems.

Job Description:

- Define technical requirements for electronic and electrical systems, software and embedded firmware based on project technical goals.

- Lead in the design, development and prototyping of such systems and software to meet project requirements, security requirements, and industry standards.

- Engage external collaborators and subcontractors to meet project requirements and goals.

- Prepare and maintain technical documentation, including drawings, design specifications, test reports, and process guidelines, to translate designs to production.

- Provide engineering support for production and quality assurance to resolve technical challenges.

- Contribute to continuous improvement initiatives, enhancing system performance.

- Collaborate with cross-functional engineering, operations and execution teams to drive project success.

Job Requirements:

- Bachelor’s degree in electronic/ electrical engineering and/or a related field of study.

- 3 years’ experience in a technical role related to electronic/electrical engineering and/ or software/ embedded firmware preferred.

- Experience in an energy or power-related field is considered an advantage.

- Excellent problem-solving skills and ability to work collaboratively in a fast-paced environment.

- Effective communication and coordination skills for cross-team collaboration.

- Hands-on experience with prototype development and fabrication processes.

- Willing to travel for field testing and supplier engagement.

Job Title
Contracts, Procurement & Admin Executive (Construction)

About the Role
We are a construction company in Singapore looking for a responsible and hands-on candidate to support contracts administration, procurement coordination and general office / project administration. The role is mainly administrative and coordination-based, with exposure to quotations, cost tracking and project documentation.

Key Responsibilities

1. Assist in preparation of quotations, cost comparisons, simple estimates and supporting documents for claims and variation works.
2. Support contracts and commercial administration, including preparation of purchase orders, subcontract documents, correspondences and records.
3. Source, compare and coordinate procurement of materials, equipment and subcontract services based on project requirements and budget.
4. Liaise with suppliers, subcontractors, clients, consultants and internal staff on delivery, documentation, pricing and administrative matters.
5. Maintain proper filing and tracking of quotations, invoices, delivery orders, claims, variation orders, contracts and project records.
6. Assist in monitoring project-related costs, committed purchases and document status.
7. Handle general office administration, including document preparation, data entry, filing, scheduling and coordination of submissions.
8. Support work pass application coordination, staff course registration, renewal follow-up, training records and related administrative documentation.
9. Assist in worker-related and project-related administrative matters, including forms, declarations, supporting documents and internal coordination.
10. Provide ad hoc administrative and operational support as assigned by management.

Requirements

1. Diploma or Degree in Business Administration, Building, Quantity Surveying, Construction Management or related field.
2. Relevant experience in contracts administration, procurement, construction administration or office administration will be an advantage.
3. Familiarity with quotations, purchase orders, invoices, variation orders, claims or project documentation is preferred.
4. Proficient in Microsoft Office, especially Excel and Word.
5. Organised, careful and able to manage multiple tasks and deadlines.
6. Good communication and coordination skills.
7. Able to work in a fast-paced construction environment.

Salary Range
SGD 3,000 to SGD 4,500 per month

Work Location
Singapore

Working Hours
Monday to Saturday

Job Description

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements

• Degree in Civil/Structural Engineering / Building
• Min 5 years structural coordinator experience in building construction Project
• Good knowledge of Structural specifications & requirements
• Preference will be given to those who can commence immediately

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Diploma in Electronics or relevant Engineering
• Min 5 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

About Cynapse

Cynapse is a leading AI software company specializing in enterprise-grade Video Intelligence Solutions Powered by Generative AI, tailored to meet the unique challenges of various industries. Our vertical-specific solutions empower organizations to enhance safety, operational efficiency, and security in complex environments such as roads, seaports, airports, and cities. By combining advanced Vision AI with Generative AI, we continually push the boundaries of video analytics, delivering insights and automation that transform operations.

Led by a global team with a proven track record of scaling startups into market leaders, we foster innovation, collaboration, and diverse perspectives. Headquartered from US, Cynapse serves clients worldwide, redefining what's possible with video intelligence.

Job Description

We are seeking a talented and highly motivated Senior Vision AI Engineer to join our AI Product group that delivers challenging, enterprise-scale Video Content Analytics solutions to global customers.

The candidate will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities:

• Design and deploy real-time video analytics pipelines for large-scale production environments
• Optimize computer vision and deep learning models for low latency, memory efficiency, and high FPS
• Own features end-to-end from research and prototyping to production deployment and monitoring
• Perform model profiling, benchmarking, and performance tuning in production systems
• Contribute to system architecture, technical design, and code reviews
• Mentor junior engineers and uphold software engineering best practices
• Collaborate closely with product, platform, and deployment teams

Minimum Qualifications:

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• At least 3 years of experience in developing Vision AI applications
• At least 3 years of experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Key Technologies & Skills Required:

• Programming Languages: C++, Python
• Computer Vision: OpenCV
• Deep Learning Frameworks: PyTorch, TensorFlow, Keras
• GPU Acceleration & Optimization: CUDA, cuDNN, TensorRT
• Model Optimization & Deployment: ONNX, quantization, pruning, FP16/INT8 inference
• Vision Models: Object detection, classification, segmentation, multi-object tracking

Personal Competencies:

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits:

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• Exciting work environment with flexible hours

Note: Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Company Overview

TESSOLVE ENGINEERING SERVICES PTE. LTD. is a technology company specializing in engineering services, supporting product development and production for semiconductor and electronics industries.

Job Summary

As a Senior Product Engineer, you will provide comprehensive engineering support across product lifecycles, drive debug and yield improvement activities, and collaborate with cross-functional teams to ensure successful product testing and production release.

Responsibilities

• Provide engineering support for RF, Mixed Signal, Digital, and Power Management products through all development and production phases
• Collaborate with test engineering and production support teams to lead debug activities, reliability qualification, and yield enhancement efforts
• Communicate technical product status and progress to management and relevant stakeholders
• Establish and clarify product testing and production release requirements with customers
• Coordinate with foundries, test subcontractors, and SAT houses to resolve production issues promptly
• Generate detailed status reports, test limits (guard bands), correlation analyses, and yield summary reports at each project phase
• Support initiatives to improve yield, reduce test time, and lower retest rates during production ramp-up

Preferred competencies and qualifications

• Diploma or Degree in Electronics or Electrical Engineering
• 5 to 8 years of relevant experience in Product or Test Engineering, preferably with foundry process background
• Experience leading technical teams is an advantage
• Solid understanding of test concepts for digital, PMIC, Mixed Signal, and RF products
• Hands-on experience with Advantest 93K Automated Test Equipment (ATE)
• Proficient in statistical data analysis and data mining techniques
• Exposure to statistical analysis software such as JMP, CEDA, Data Power, or Optimal Plus is a plus
• Knowledge of scripting languages (Perl, Java, VBA) and automation in reporting is beneficial
• Strong verbal and written communication skills with the ability to work independently