• Provide Health, Safety & Environment (HSE) advice to all Businesses.
• Act as Registered Workplace Safety & Health Officer (WSHO), Registered Fire Safety Manager (FSM)
• Ensure compliance to all elevant Safety Management Systems.
• Ensure a safe working environment is made available to all employees, clients and contractors by ensuring that all regulatory HSE requirements are satisfied.
• Company Management Representative for all Safety Management System certifications.
• Central point of contact for all local HSE related issues.
• Development and maintenance of an effective Health and Safety Management System in line with Group policies and best practices.
• Development of an effective HSE strategy to support continuous improvement.
• Undertake accident/incident investigations and prepare/provide accident/incident reports where necessary.
• Undertake HSE inspections, audits and training where required.
• Provide appropriate advice to managers offering a practical and informed interpretation of Company Policies and H&S legislations in response to routine and non-routine matters to enable all operations to function effectively and consistently within established guidelines.
• To keep appraised of current HSE management best practice and theory in order to effectively advise and ensure relevant application in line with business objectives, its culture and environment.
• Maintain effective working relationships with key people in all Businesses by ensuring an appropriate level of interaction, including reactive and proactive site visits and regular written/verbal communications.
• Ensure HSE remains a focused strategy and support the management in identifying priorities and monitoring performance against strategic objectives.
• At all times exercise due regard for the health and safety of all in line with Company’s policies and procedures.

Requirements:

• At least 5 years of experience in safety, health & environment management in a similar industry such as oil & gas , chemicals industries.
• Must have Level C certificate.
• Certified Workplace Safety & Health Officer with the Ministry of Manpower.
• Certified Fire Safety Manager with the Singapore Civil Defense Force.
• Demonstrate exemplary SHE behavior and motivate others to follow.
• Able to analyze and conduct critical thinking to identify gaps and improvements required

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

By sending your job application/resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)

Posting Personnel: Quennie Chen

EA Personnel Reg No.: R1222837

• Well Established Company
• Basic $3000 - $3500 + AWS + VB
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• To act as the primary contact person for liaising and coordinating with internal and external parties ensuring project requirements at customer site are complied
• Lead a team of professionals through all phases of project development, implementation and completion
• Oversees daily project operation, logistics arrangements, and customer’s arrangement
• Project site management and coordination
• Assist in preparing and updating project administration documents, timelines, meeting notes, external contractor briefing notes and status report
• Work closely with customer site operations to understand their requirements and seek clarifications if needed
• To participate in contractor meetings as and when required by customer
• Assist the Manager to manage customer care program. To monitor customer satisfaction, complaints, changes in customer’s people, equipment, processes, materials used and business strategies
• To ensure all ISD personnel and sub-contractors adhere to the safety, Environmental and Health policies and requirements. Review the ISD personnel and sub-contractor work activity and review their JSRA
• Other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Mechanical, Operations, Engineering, or equivalent
• Possessed Minimum Class 3/3A license
• Safety Orientations Course (Working in Power Plant and Construction)
• Supervise Work at Height Course (preferred)
• Candidates with high pressure hydro jetting experience will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Reporting to the Assistant Director, Strategic Planning and Organisational Excellence Division, the incumbent will support NIEC’s efforts in digitalizing workflows, improving operational efficiency and strengthening data-driven decision-making. This role sits at the intersection of process improvement, data analytics, and strategic planning, and will work closely with internal stakeholders to streamline performance reporting, generate insights, and support organisational initiatives. The incumbent will also be expected to support matters relating to NIEC Board of Directors, corporate governance and internal staff communication.

Job Responsibilities

Process Improvement

• Design and implement dashboards to streamline cross-divisional performance reporting processes.

• Ensure data accuracy, consistency, and usability across reporting systems.

Data Analytics

• Coordinate, organize and analyse institutional data to identify trends, gaps, and opportunities for improvement.

• Conduct environmental scans and basic market/sector analysis with supervision to inform decision-making.

• Translate data insights into clear, actionable recommendations for stakeholders.

Stakeholder Engagement

• Engage internal and external stakeholders to gather inputs and validate findings.

• Support efforts to build buy-in for new processes, tools, and strategic initiatives.

• Facilitate discussions and presentations to communicate insights and proposals.

Others

• Perform other related duties as assigned e.g. provide administrative support to Board Secretariat when necessary.

Job Requirements

• Bachelor’s Degree with at least 2-3 years of relevant working experience in strategy, analytics and operations.

• Strong analytical and problem-solving skills.

• Adept at working with data and familiar with data visualization tools (e.g. Power BI, Tableau).

• Proficient Microsoft Office and possesses intermediate to advanced excel skills.

• Meticulous, with strong attention to detail and ability to follow through with multiple iterations of work.

• Strong stakeholder engagement skills, with the ability to align diverse stakeholders on strategic matters.

• Experience in process improvement or digitalization projects and knowledge of local education/early childhood sector will be an advantage,

Perks & Benefits:

• Flexible Hybrid Work Arrangement

• Learning & Professional Development

• Comprehensive Benefits Package such as attractive leaves schemes, flexible benefits, dental coverage etc.

Note: All new hires will be offered a two-year contract in the first instance. Contract renewal and emplacement on permanent appointment will be subject to continuous good performance.

We regret that only shortlisted candidates will be notified.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades.

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including coordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description

• Work closely with Senior Process Engineer to deliver projects and assignments including the following responsibilities that follows.
• Develop and design efficient and cost-effective water treatment processes for various applications, such as potable water, wastewater, desalination, and industrial water and wastewater treatment.
• Evaluate client requirements, conduct feasibility studies, and design process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs)
• Conduct performance evaluations, analyze data, and recommend modifications to process parameter equipment, and technologies.
• Evaluate equipment specifications, conduct technical evaluations, and make informed recommendations based on performance, reliability, and cost-effectiveness.
• Define project scope, develop project plans, monitor progress, manage resources, and ensure timely and cost-effective project delivery.
• Professionally manage and engage clients to present detailed solutions.
• Prepare detailed technical reports, design documents, and project updates.
• Document process design criteria and calculations.

Qualifications

• Bachelor's or Master's degree in Chemical Engineering, Environmental Engineering, or Civil
  Engineering
• Strong analytical and problem-solving skills.
• Understand water/wastewater treatment process from an engineering perspective, including cross-
  disciplinary requirements of these projects
• Proficiency in process simulation software and digital design tools (BIM/AutoCAD/Revit/etc)
• Excellent communication and interpersonal skills.

Purpose of the Job:

• To continuously improve Wafer processes and capabilities to attain the highest quality and productivity through work simplifications and standardization, implementation of best-known methods and controlled operating procedures

Key Job Accountabilities:

• Sustain and provide continuous process improvement through planning, evaluating, verifying and executing procedures to ensure that products meet all customers’ requirements in terms of quantity, yield and cycle time. 
• To provide interim and long-term corrective actions for any discrepancies.
• Liaise with customers & potential customers on development & improvement of process, material and equipment capabilities.

Scope of the Job:

• In-charge of photo resist coat, exposure, develop and curing process for PI (e.g. HD4100) and PR (Positive, Negative).  Different photo sensitive material is coated in different machines and different exposure machine types (steppers & aligners).
• Setup recipe for new devices.  Process characterization for every new device: coating thickness, exposure recipe and CD after develop. 
• Working closely with mask designer to continuously update wafer process design rules so to improve process capability and productivity.
• Perform continuous improvement activities for top defects, process simplification and throughput improvement.
• Monitor process capability in terms of input parameter control and SPC monitoring

Required Experience and Qualifications:

• Requires Degree in Engineering, Material Sciences, Chemistry or equivalent
• Minimum 2 years of relevant experience in wafer bumping or wafer fabrication
• Minimum 5 years of experience in relevant area is an added advantage

Key Responsibilities

• Develop and implement business strategies to achieve sales targets and expand market share.

• Conduct regular customer visits to deliver sales presentations and promote products.

• Maintain strong sales visibility through effective use of CRM systems, project tracking, and weekly reporting.

• Meet assigned revenue and profit objectives.

• Align sales activities with the company’s overall business strategy.

• Establish and maintain strong relationships with both existing and potential customers.

• Provide comprehensive sales and after-sales support in collaboration with internal teams and clients.

• Prepare and manage sales quotations using the ERPLN system.

• Follow up on post-sales matters to ensure customer satisfaction.

• Track quotation progress and manage sales forecasts.

• Perform order screening and ensure accurate order processing in coordination with the PMO team.

• Conduct market research and provide insights to the Head of Sales.

• Ensure all sales documentation complies with ISO standards and internal procedures.

• Support ad-hoc tasks or projects assigned by management or the Sales Manager.

• Stay informed about industry developments, market trends, and competitor activities to identify new opportunities and maintain competitiveness.

Requirements / Competencies

Diploma or Bachelor’s degree in Mechanical, Electrical/Electronic, Chemical, or related Engineering fields.

3–5 years of experience in industrial sales, preferably in process instrumentation, valves, automation, or similar industries.

Experience working in multinational companies within a matrix organization structure is an advantage.

Strong technical knowledge with the ability to conduct product demonstrations and communicate value propositions effectively.

Results-oriented, self-driven, and able to perform in a fast-paced environment.

Established network within the process instrumentation and control industry is preferred.

Project sales experience is an added advantage.

Familiarity with CRM systems and ERPLN.

Proficient in Microsoft Office tools (Excel, Word, Outlook, PowerPoint).

If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai 

EA License No: 23S1595 | EA Registration No:

R25127838

If you are a looking to expandyour career in the Process Control Systems space, Emerson has an excellentopportunity for you! We are seeking a Senior / Field System Engineer (ProcessControl Systems) (DCS/PLC) who shall participate in the hardware and softwareconfiguration, programming, installation, testing and commissioning ofDistributed Control Systems (DCS) including interfacing systems. You willsupport the system at site including performing troubleshooting, carrying outmaintenance activities, providing technical support and recommendations, andparticipating in upgrade activities.

If this sounds like a good fit,we are eager to hear from you!

In this Role, YourResponsibilities Will Be:

·       Assist in software installation,configuration, programming and testing and hardware set up for small tomedium-sized DCS and other project-related systems.

·       Coordinate with 3rd party vendors forinterface to their system(s).

·       Participate in site installation and sitecommissioning.

·       Prepare and participates in Factory AcceptanceTesting (FAT) and Site Acceptance Test (SAT).

·       Prepare and update engineering documentationand records, and/or liaise with relevant parties to ready it.

·       Provide site service at Singapore-basedfacilities to maintain existing “live” systems (reactive and preventive),diagnose issues, and recommend technical solutions.

·       Disseminate safety and/or relevant notices toupdate System as part of service support.

·       Lead and facilitate renewal of softwarelicenses.

·       Generate standard service reports andfacilitate provision of customized reports where required.

·       Align with Sales team’s objectives and providesales support such as preparation of repair and upgrade estimations, assist intechnical clarifications and conduct of demo/testing at customer’s site whenrequired.

·       Uphold service level to meet and exceedcustomers’ expectations.

·       Align with the safety practices and proceduresof the company.

·       Assist co-workers where required or assignedby supervisors.

Who You Are:

You gain insight into customerneeds. You identify and seize new opportunities. You anticipate future trendsand implications accurately.

For This Role, You Will Need:

·       Degree/Diploma in Computer Science,Information Systems or Engineering (in Electrical, Electronics, Chemical,Mechanical or Control subject areas).

·       At least 3 years of relevant experiencepreferred, but those without work experience may also apply.

·       Experience with Programmable Logic Controllers(PLC) is an advantage.

·       A collaborative spirit with excellentproblem-solving abilities.

·       Self-motivated with good time management andwilling to learn.

·       Proficient in verbal and written English foreffective communication.

Our Culture &Commitment to You

At Emerson, weprioritize a workplace where every employee is valued, respected, and empoweredto grow. We foster an environment that encourages innovation, collaboration,and diverse perspectives—because we know that great ideas come from greatteams. Our commitment to ongoing career development and growing an inclusiveculture ensures you have the support to thrive. Whether through mentorship,training, or leadership opportunities, we invest in your success so you canmake a lasting impact. We believe diverse teams, working together are key todriving growth and delivering business results.

We recognize theimportance of employee wellbeing. We prioritize providing competitive benefitsplans, a variety of medical insurance plans, Employee Assistance Program,employee resource groups, recognition, and much more. Our culture offersflexible time off plans, including paid parental leave (maternal and paternal),vacation and holiday leave.

WHYEMERSON

Our Commitment to OurPeople

At Emerson, we aremotivated by a spirit of collaboration that helps our diverse, multiculturalteams across the world drive innovation that makes the world healthier, safer,smarter, and more sustainable. And we want you to join us in our bold aspiration.

We have built anengaged community of inquisitive, dedicated people who thrive knowing they arewelcomed, trusted, celebrated, and empowered to solve the world’s most complexproblems — for our customers, our communities, and the planet. You’ll contributeto this vital work while further developing your skills through ouraward-winning employee development programs. We are a proud corporate citizenin every city where we operate and are committed to our people, ourcommunities, and the world at large. We take this responsibility seriously andstrive to make a positive impact through every endeavor.

At Emerson, you’ll seefirsthand that our people are at the center of everything we do. So, let’s go.Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Pushboundaries. Be empowered to make things better. Speed up to break through.Let’s go, together.

ABOUTEMERSON

Emerson is a globalleader in automation technology and software. Through our deep domain expertiseand legacy of flawless execution, Emerson helps customers in criticalindustries like life sciences, energy, power and renewables, chemical andadvanced factory automation operate more sustainably while improvingproductivity, energy security and reliability.

With global operationsand a comprehensive portfolio of software and technology, we are helpingcompanies implement digital transformation to measurably improve theiroperations, conserve valuable resources and enhance their safety.

We offer equitableopportunities, celebrate diversity, and embrace challenges with confidencethat, together, we can make an impact across a broad spectrum of countries andindustries. Whether you’re an established professional looking for a careerchange, an undergraduate student exploring possibilities, or a recent graduatewith an advanced degree, you’ll find your chance to make a difference withEmerson. Join our team – let’s go!

The Role

We are looking for a Business Process Executive to support our Strategic Finance Manager across HR, operations, and general administration. You will be involved in HR administration, payroll support, process documentation, and day-to-day operational tasks. Over time, you will take on broader responsibility as you get familiar with how the business runs. The right person is not afraid to ask questions, picks things up quickly, and brings ideas to the table without being asked.

What You Will Do

HR & Payroll Administration

•     Support monthly payroll processing and verify calculations before submission

•     Handle work pass applications, renewals, and related MOM submissions

•     Maintain employee records and ensure data is accurate and up to date

•     Assist with onboarding, offboarding, and leave administration

•     Help ensure HR practices are in line with the Employment Act and CPF regulations

Process & Documentation

•     Document how things are currently done — then help improve them

•     Write clear, simple SOPs so processes do not depend on any one person

•     Flag issues or inconsistencies when you spot them, and suggest a fix

•     Support the team in reducing manual and repetitive tasks over time

Finance Administration

•     Assist with accounts payable and receivable — tracking invoices, following up on outstanding payments, and ensuring timely processing

•     Review outgoing invoices to ensure they are accurate, complete, and compliant before submission to clients

•     Maintain proper filing of all invoices and supporting documents for audit and GST purposes

•     Flag discrepancies or missing documentation to the manager before they become issues

General Administration & Support

•     Provide day-to-day administrative support to the Strategic Finance Manager

•     Help maintain filing systems, trackers, and internal documents

•     Assist with preparing reports, summaries, and correspondence as needed

•     Pick up ad-hoc tasks across HR, operations, and finance as the role grows

Who We Are Looking For

•     3 – 5 years of general HR or admin experience in Singapore

•     Familiar with CPF, MOM work pass processes, and basic Employment Act requirements

•     Comfortable using AI tools like ChatGPT or Copilot in daily work — not just aware of them, but actually using them

•     Asks questions when unsure rather than guessing or staying stuck

•     Organized, detail-oriented, and able to manage multiple tasks without needing to be chased

•     Good communicator — able to work alongside different people across the company without friction

•     Proficient in Microsoft Office and Google Workspace

Why Join Us

•     Direct exposure to how a growing company operates — across HR, operations, and finance

•     Management who will develop you, not just delegate to you

•     Real ownership of the work you take on — your improvements stick

•     A team that is actively investing in smarter ways of working

Job Responsibilities:

• Analyze and troubleshoot problems with a systematic and analytical mindset.
• Monitor process performance and key parameters to maintain product quality and consistency, utilizing SPC charts and other statistical tools.
• Collaborate with Equipment Engineers to drive yield, quality, and throughput improvement projects.
• Work with cross-functional teams to implement corrective actions on quality-related issues.
• Partner with external vendors to identify root causes, provide application support, and address topics relevant to the smooth operation of manufacturing equipment.
• Conduct training sessions for technicians to enhance technical competency and disseminate critical knowledge needed to achieve key module KPIs.
• Lead or participate in projects focused on downtime reduction, cost savings, yield improvement, or new material qualification.
• Define process controls and prepare related documentation to ensure the smooth running of production.
• Drive/contribute in quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.
• Enforce in line controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.
• Establish, review and perform regular update of FMEA, OCAP, Process control, Risk Assessment and SIPOC on all critical processes to ensure a robust process.
• Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.

Job Requirements:

• Minimum Bachelor’s degree in Physics / Chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.
• Candidates with experience in electroplating are preferred.
• Knowledge on semiconductor process technology.
• Possess strong technical competencies in his field of study.
• Good knowledge of statistical and quality tools.
• Experience with software applications such as MS Power Point, Excel and Word

• Well Established Company
• Basic $3000 - $3500 + AWS + VB
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• To act as the primary contact person for liaising and coordinating with internal and external parties ensuring project requirements at customer site are complied
• Lead a team of professionals through all phases of project development, implementation and completion
• Oversees daily project operation, logistics arrangements, and customer’s arrangement
• Project site management and coordination
• Assist in preparing and updating project administration documents, timelines, meeting notes, external contractor briefing notes and status report
• Work closely with customer site operations to understand their requirements and seek clarifications if needed
• To participate in contractor meetings as and when required by customer
• Assist the Manager to manage customer care program. To monitor customer satisfaction, complaints, changes in customer’s people, equipment, processes, materials used and business strategies
• To ensure all ISD personnel and sub-contractors adhere to the safety, Environmental and Health policies and requirements. Review the ISD personnel and sub-contractor work activity and review their JSRA
• Other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Mechanical, Operations, Engineering, or equivalent
• Possessed Minimum Class 3/3A license
• Safety Orientations Course (Working in Power Plant and Construction)
• Supervise Work at Height Course (preferred)
• Candidates with high pressure hydro jetting experience will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductortechnologies mastering the semiconductor supply chain with state-of-the-artmanufacturing facilities. An integrated device manufacturer, we work with morethan 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, andthe need to support a more sustainable world. Our technologies enable smartermobility, more efficient power and energy management, and the wide-scaledeployment of cloud-connected autonomous things. We are on track to be carbonneutral in all direct and indirect emissions (scopes 1 and 2), producttransportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the endof 2027.

Further information can be found at www.st.com

YOUR ROLE 

​As a Senior Wets Process Development Engineer, you will be the technical anchor for our end-to-end wet process portfolio. You will be responsible for the following:

• ​Process Architecture: Lead the design and optimization of advanced plating processes (including NiPdAu/ENEPIG), wet etching, resist stripping, and precision cleaning modules.
• ​Root Cause Analysis: Tackle complex, localized process defects—such as thickness non-uniformity or interfacial passivation—using advanced analytical tools (SEM/EDX, AFM).
• ​Technology Scaling: Drive the transition of new wet processes from initial lab-scale concepts to robust, high-volume manufacturing (HVM) readiness.
• ​Chemical Innovation: Evaluate and integrate next-generation chemistries, including the management of complex stabilizer systems and additive interactions to improve process margins.
• ​DOE Leadership: Design and execute sophisticated multi-variate experiments to isolate variables in electrochemical reactions and surface preparation.
• ​Cross-Functional Integration: Collaborate with Lithography, PVD, CVD, R&D, and Assembly teams to ensure seamless process compatibility across the entire device fabrication flow.

YOUR SKILLS & EXPERIENCES

We are looking for a seasoned expert who combines hands-on laboratory discipline with a deep theoretical understanding of wet bench dynamics.

​Requirements:

• ​Education: Minimum Bachelor’s Degree in Chemical Engineering, Materials Science, Chemistry, or a related Engineering discipline.
• ​Experience: 5 to 10 years of direct experience in semiconductor process development, with a heavy emphasis on wet station technologies.
• ​Wet Process Mastery: * Proven track record in Electroless and Electrolytic plating (experience with NiPdAu chemistry and stabilizer management is a significant plus).
• Deep expertise in Wet Etching and Wafer Cleaning (SC1/SC2, SPM, and advanced solvent chemistries).
• ​Hands-on experience with Resist Stripping and surface preparation for advanced packaging or Front-End-Of-Line (FEOL) applications.
• ​Analytical Rigor: Proficiency in Design of Experiments (DOE) and Statistical Process Control (SPC). ​Ability to interpret complex material characterization data to identify chemical stratification or surface poisoning issues.
• ​Soft Skills: Strong communication skills to present R&D findings to stakeholders and the "grit" to solve challenges.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

YOUR ROLE 

As a Senior Process Engineer, you will be the technical owner of the Electro‑Chemical Plating (ECP) copper process on the LAM Novellus SABRE platform. You will drive process development and sustaining activities, working closely with equipment engineering to characterize hardware, resolve complex issues, and continuously improve process robustness, yield, and overall tool performance.

• Develop, optimize, and sustain ECP Cu reinforcement / damascene fill processes on Novellus SABRE tools.
• Define and tune recipes and hardware configurations to achieve target thickness, uniformity, fill performance, and defect levels.
• Collaborate with PVD barrier/seed and integration teams to ensure strong linkage between upstream processes (Ti, TiN, CVD‑TiN, Cu seed, etc.) and downstream ECP performance.
• Perform structured hardware and process characterization, including experiments on flow, contact design, waveform, and chemistry conditions.
• Lead troubleshooting and excursion management, conduct systematic root‑cause analysis, and implement permanent corrective and preventive actions.

YOUR SKILLS & EXPERIENCES

• Bachelor’s or Master’s degree in Electrical/Electronic Engineering, Microelectronics, Materials Science, Applied Physics, Chemical or Mechanical Engineering, or a related discipline.
• Min 5 years of hands‑on experience with ECP copper processes on LAM Novellus SABRE systems in a semiconductor fab environment.
• Solid knowledge of semiconductor manufacturing, vacuum technology, and thin‑film deposition, including PVD barrier/seed fundamentals.
• Strong collaboration and communication skills: able to document and present findings clearly through technical reports, reviews, and data summaries; active participation in cross‑functional forums and project teams.
• Proven problem‑solving capability, including advanced root‑cause analysis, failure‑mode identification, and implementation of robust, sustainable solutions.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

YOUR ROLE 

As a Senior Process Engineer, you will be the technical owner for tungsten deposition and etch‑back processes, with a primary focus on W deposition on the Novellus Altus platform. You will work closely with equipment engineers to characterize hardware, resolve complex issues, and continuously improve process stability, capability, and yield.

Responsibilities

• Develop, sustain, and optimize CVD tungsten, WALD, and tungsten etch-back processes, focusing on Pulsed Nucleation Layer (PNL) tungsten on Novellus Altus
• Drive hardware and recipe characterization on Altus systems to improve film uniformity, reduce defects, and enhance tool productivity
• Perform structured troubleshooting and root-cause analysis to resolve process excursions and chronic issues
• Correlate process conditions with film properties and device performance using structural, electrical, and reliability data
• Collaborate with integration, device, yield, equipment teams, and vendors to support technology transfers and new node ramp-up

Job Requirements

• Degree in Electrical & Electronics, Microelectronics, Material Science, Applied Physics, Chemical, or Mechanical Engineering
• Minimum 5 years of experience in Thin Film Tungsten process on Novellus Altus system
• Strong fundamentals in thin-film deposition, especially CVD W / WALD, nucleation, and etch-back mechanisms
• Effective collaboration and communication skills

Job Purpose

The Etch (Senior) Process Engineer develops plasma etch processes for MEMS/CIS/Power Devices/Advanced Packaging and/or memory/logic etch applications in support of our sales activities to customers, during installation and after service care. Their main duties include process testing and monitoring of the equipment, updating current system processes and conducting assessments of the working condition of our tools.

Principal Accountabilities

1. Develop new plasma etch processes for above mentioned semiconductor industry segments with strong focus on polysilicon and nitride or metal etch.
2. Work with customer to maintain & optimize current plasma etch processes, including coordinating and conducting etch process development
3. Qualify etch processes in installed base
4. Work with engineering and product group for continuous improvement project
5. Participate in customer meetings, escalations and resolve customer problems in a timely manner
6. Troubleshoot process issues
7. Keep field operations and management team informed of customer’s evaluation and perception of system performance
8. Provide technical guidance to less experienced process engineers and/or customer
9. Any other ad-hoc duties / projects as assigned by Manager

Education & Experience

• Min. Degree in Engineering or related engineering fields
• More than 5 years of relevant experience in process engineering (sustenance or development) in a wafer fab or etch equipment vendor position, preferably with at least 2-3 years experience on Etch process/equipment
• Prior field process support or development experience in Inductively Coupled Plasma(ICP) etcher is a must
• Technical knowledge of deep Silicon etch using Bosch process on Through Silicon Via (TSV), plasma dicing or deep trench applications is advantageous
• Some experience in Capacitively Coupled Plasma (CCP) etcher will be bonus

Essential Attributes

• Independent and willing to accept challenges
• Willing to travel both regionally and internationally to support overseas installed base
• Flexibility to work on shift/ overtime/ stand-by/ on-call/ holidays when required
• Bilingual in English and Mandarin as counterparts are mostly Chinese speaking

Responsibilities :

• Meet Departmental goals on Cost, Responsiveness & Quality objectives
• Develop and establish work instructions, routing, and workmanship standards
• Track & manage CAPEX spending within the allocated budget
• Establish preventive maintenance and calibration of production equipment
• Supervise and train subordinates and implements company policy
• Drive LEAN opportunities on manufacturing lines
• Provide an area of technology expertise
• Install and commission new equipment
• Provide technical resource & training to staff
• Lead new product development / process start-ups / transfers and change management
• Lead the planning and executing yield / quality / process / UPH / machine / OEE improvement initiatives
• Lead in developing and promoting new technologies and processes
• Plan and lead engineering team to improve manufacturing system / processes

Requirements :

• Degree in Engineering
• 10 years of relevant experience
• Strong experience in Manufacturing Process
• Good written and communication skills
• Possess strong time management, analytical problem-solving and decision making skills
• Able to start work in short notice

Company Overview

At STMicroelectronics, we are 50,000 creators and makers of semiconductor technologies mastering the supply chain with advanced manufacturing. Our Singapore operations include manufacturing, R&D, design, sales, and supply-chain management with about 4,900 employees.

Job Summary

Join STMicroelectronics to operate and optimize photolithography and bonding processes, drive process improvements, and collaborate across teams to advance semiconductor manufacturing technologies.

Responsibilities

• Operate and optimize ASML i-Line Stepper Systems by defining and tuning process recipes including focus, exposure dose, and alignment to ensure precise photolithography outcomes
• Perform routine process monitoring and troubleshooting on ASML i-Line steppers, including tool qualification, SPC tracking, and defect analysis to maintain stable and repeatable process performance
• Analyze process and metrology data to identify improvement opportunities, conduct root-cause analysis, and implement corrective and preventive actions (CAPA) to enhance yield, throughput, and process stability
• Assist in developing, characterizing, and optimizing photolithography, screen printing, and bonding processes within semiconductor manufacturing environments, including MEMS technology development
• Monitor and control manufacturing processes to ensure consistent, high-quality output and promptly troubleshoot issues with effective corrective actions
• Maintain detailed documentation of process parameters, experiments, and results, and prepare technical reports and presentations to communicate findings and recommendations to engineering teams
• Update process documentation and standard operating procedures (SOPs) to reflect process changes and improvements
• Collaborate closely with cross-functional teams including R&D, production, and quality assurance to integrate photolithography, screen printing, and bonding processes seamlessly
• Participate actively in team meetings and problem-solving discussions, providing support to shift engineers and technicians as needed
• Engage in continuous improvement initiatives to enhance process efficiency, yield, and quality, including identifying and implementing opportunities for process automation

Preferred competencies and qualifications

• Bachelor’s degree in Electrical & Electronics, Mechatronics, Physics/Applied Physics, Materials Science, Chemical, or Mechanical Engineering
• Understanding of photolithography or bonding principles and semiconductor processes
• Knowledge of EKRA printing and bonding processes considered an advantage
• Experience with photolithography equipment such as Track (DNS/TEL), Stepper (Canon/ASML), and Aligner (EVG/SUSS)
• Hands-on experience with screen printing (EKRA) and bonding (EVG) equipment
• Knowledge of data analysis and statistical process control
• Effective communication and teamwork skills
• Ability to work independently and manage multiple tasks effectively

About the Role:
Responsibility for selling and supporting instrumentation solutions across process industries, including oil & gas, chemicals, pharmaceuticals, water treatment, and manufacturing.

Key Responsibilities

• Develop strategies to achieving sales target and increased market shares

• Conduct customer visits, sales pitches, and product presentations

• Ensure sales visibility through adoption of CRM, project pursuit list, weekly sales reporting

• Align and link business strategies set by company

• Achieve revenue and profit targets with build and maintain customer relationships

• Provide pre- and post-sales support with internal teams

• Prepare quotations (ERPLN) and manage follow-ups

• Track quotation status, forecasts, and ensure clean order processing

• Conduct market analysis and report insights

• Ensure ISO-compliant documentation

• Support ad-hoc projects and stay updated on industry trends

Requirements

• Diploma/Degree in Engineering (Mechanical, Electrical/Electronic, Chemical, etc.)

• 3–5 years’ experience in industrial sales (instrumentation, valves, automation, or similar)

• Experience in MNC/matrix environments with relevant industry

• Strong closing and negotiation ability

• Industry network and project experience are advantages

• Familiar with CRM, ERPLN, and Microsoft Office
  

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai 

  EA License No: 23S1595 | EA Registration No:

  R25127838

Senior Process Engineer (Balance of Plant / Wastewater Systems)

Company: NES Fircroft (Partnering with a leading engineering and infrastructure organisation)
Location: Singapore
Employment Type: Contract / Permanent

Overview

NES Fircroft is partnering with a leading engineering organisation to hire a Senior Manager, Process to support a large-scale infrastructure project involving Balance of Plant (BOP), water and wastewater systems, and mechanical systems.

This role will play a key part in engineering design management, commercial coordination, financial oversight, and stakeholder engagement across the project lifecycle.

Key Responsibilities

Engineering & Design Management

• Support the Project Leadership team in managing BOP design activities across water, wastewater, and plant systems
• Coordinate with multidisciplinary teams to ensure alignment with project, regulatory, and operational requirements
• Review engineering deliverables including PFDs, P&IDs, functional descriptions, and design documentation
• Oversee preparation of Issued for Construction (IFC) drawings and documentation

Procurement & Commercial Support

• Support preparation of tender documents and commercial submissions
• Conduct technical and commercial evaluations for engineering and consultancy services
• Review contracts and commercial documentation, ensuring compliance with project requirements
• Work closely with procurement and project teams on vendor selection and package evaluation

Financial Management & Reporting

• Prepare and present cost, revenue, and budget reports to senior stakeholders
• Support budget planning and forecasting, including contingency allocation
• Monitor and control project expenditure to align with approved budgets
• Review and assess variation orders and cost impacts

Operations, Testing & Commissioning

• Support development of Testing & Commissioning (T&C) procedures and Site Acceptance Testing (SAT) documentation
• Coordinate with operations teams on plant readiness, handover, and O&M requirements
• Review and support preparation of Operations & Maintenance (O&M) documentation and as-built records

Compliance & Stakeholder Management

• Ensure compliance with regulatory and project-specific requirements
• Liaise with external stakeholders including clients, authorities, consultants, and auditors
• Identify potential risks and areas of non-compliance, recommending mitigation strategies
• Maintain strong working relationships with key project stakeholders

Administration & Governance

• Support preparation of management reports, presentations, and project documentation
• Review and validate procurement and financial transactions within internal systems
• Coordinate meetings, prepare minutes, and track key action items
• Maintain accurate and organised project records

Requirements

• Degree in Chemical Engineering, Process Engineering, Environmental Engineering, or related discipline
• Minimum 10–15 years of experience in process engineering within EPC / infrastructure / industrial projects
• Strong experience in:Wastewater / water treatment systems (WWTP, WTP)Balance of Plant (BOP) or plant utility systemsProcess design (PFD, P&ID, calculations, FEED / detailed engineering)
• Exposure to Testing & Commissioning, SAT, and plant operations (O&M)
• Experience in tendering, commercial evaluation, and contract review
• Strong stakeholder management and coordination skills
• Familiarity with regulatory requirements and large-scale infrastructure projects is an advantage

Why Apply

• Opportunity to work on a large-scale, high-profile infrastructure project
• Exposure to end-to-end project lifecycle (design, procurement, commissioning, operations)
• Collaborative and multidisciplinary project environment
• Strong career progression within engineering and project leadership

Additional Information

• Only shortlisted candidates will be contacted
• Candidates with prior experience in large-scale plant or infrastructure projects will be highly preferred

Job Responsibilities: 

• Process SAP accounting workflows in accordance with Business Process Control guidelines
• Verify supporting documents such as sales and purchase delivery notes and contracts to ensure accuracy and compliance before posting transactions into the accounting systems 
• Execute month-end and quarter-end closing activities, including accurate entries for sales, purchases, and non-operating items, by applying the Closing Process Checklist to ensure completeness 
• Review and verify vendor and customer bank account applications, and provide clarification for third-party or cross-border payments when required 
• Systematically process 500 to 1000 workflows per month and maintain good communication flow with accounting members 

Job Requirements 

• Prior experience in both AP and AR
• Degree in Accounting (or its equivalent)
• Prior SAP experience would be advantageous 
• Detailed-focus and team player

Additional Information: 

• Working Location: Shenton Way MRT, CBD 
• Working Hours: Monday to Friday, 8.45am - 5.15pm 
• 6 months contract 
• Salary: $3500 - $3800
• Transport Allowance: $110 monthly 
• Contract Completion Bonus

YOUR ROLE
·       Mentor/coach employees in Lean, Business Excellence & Six Sigma concept and knowledge
·       Identify value stream waste, coach and drive LEAN principle and methodologies for waste eliminations.
·       Facilitate and drive implementation of various site’s Operations Excellence programs, i.e. Site Classification Assessment, Kaizen, Productivity Improvement, Performance Management etc.
·       In liaison with the site team and site management team, perform as catalyst across operations for performance improvement at projects along with process change. 
·       Run various continuous improvement projects, rapid problem-solving exercises and other learning events.
·       Provide support and assistance to sites/operations/departments with the knowledge of Operations Excellence requirements and promote company initiatives
·       Responsible for Country Lean Reporting
·       To maintain and control documents based on CEVA Quality Management System (ISO9001 & AS9120)
·      Learn & Understand the Customer WMS systems
·       Able to do extensive Data
·       Analysis to understand the trends and provide recommendations on Budgets, Head Count requirements, Volume etc

WHAT YOU WILL BE DOING

• Independently lead a group of staffs to execute key improvement projects of Productivity, Cost and Quality to support Business Goals & Objectives.
• Possesses CI project leadership to ensure improvement projects / plans are implemented in a timely manner, well documented, presenting updates and outcomes of improvement initiatives and related activities.
• Work closely with operations to develop and deliver opportunities for improvements, with an action / strategic deployment plans.
• Pro-actively work with site in promoting continuous improvement (Kaizen) cultures across the operations; deliver
• Kaizen training & workshop, review & coach site on quality Kaizen,identify key Kaizen projects impacting business performance
• Work closely with site on Site Classification Assessment (SCA) deployment; develop and execute SCA support plan as functional expert, coach LEAN metrics & tools implementation, develop assessment schedule & conduct assessments, track & monitor DIY progress and through the knowledge and experience help to develop and improve the metrics’ content.
• Be the Subject Matter Expert (SME) in LEAN / Continuous Improvement, conduct necessary trainings including LEAN games, SCA, Kaizen, structured problem solving and LEAN Introduction Training (LIT) as per LEAN plan.
• Provide Data Analysis insights using the latest tools like Power BI, Excel , VBA/ SQL Scripts etc.
• Prepare and review LEAN reports (CL KPIs, SCA, 5S, Kaizen, productivity, saving, budgeting and etc.), and ensure timely submission.
• Work on the SAP S4 Hana System and help in the trainings, UAT and Document creations.

WHAT ARE WE LOOKING FOR

• Degree in Supply Chain, Logistics, Engineering, Business Administration, or equivalent
• At least 5+ Years of work experience
• Knowledge in Lean, MS Office- Excel , Word, Power Point, Visio
• Proficiency in Data Analysis- Excel, Power BI,
• Excellent verbal and written communication skills Planning, organizing, delegation and analytical skills
• Strong negotiation skills, influential and persuasive

Job Summary:

Serves as the onsite manufacturing lead for our client’sThird-Party Manufacturer (TPM) Operations team and is responsible for transferring new products and processes from R&D into production, as well as sustaining post-transfer projects. This is achieved through organization, schedule adherence, and alignment with overall program objectives. The role provides dedicated local leadership to drive execution of all activities required to establish compliant, robust, and fully validated manufacturing processes. Accountable for manufacturing related technical documentation, facilitating cross-functional alignment, and ensuring the timely completion of projects at TPM.

Job Scope:

Process Development, Design Transfer, and Sustaining

·       Write process specifications and equipment requirements in collaboration with cross-functional teams and TPM stakeholders.

·       Own the development and maintenance of process documentation, including SOPs, work instructions (WIs), inspection plans, validated parameter settings, pFMEAs, DOEs, and validation protocols and reports (IQ, OQ, PQ, TMV).

·       Review and provide feedback regarding line design, capacity estimates, and cycle time analyses developed by the TPM.

·       Lead process monitoring activities and manage KPIs such as first-pass yield, machine uptime, and failure rates at the TPM, while driving sustaining and continuous improvement initiatives.

·       Ensure materials, equipment, personnel training, and quality controls are fully prepared and approved for commercial production.

·       Assess, manage, and execute change control activities that impact product design or validated manufacturing processes.

·       Participate in the development of technical project plans and schedules covering all site-level engineering activities.

Project Leadership & Execution

·       Support the development and execution of technical project plans and detailed schedules for all engineering activities at the TPM site.

·       Report on project status, including progress, risks, milestones, deliverables, and provide routine updates to Operations Management.

·       Maintain cross-functional alignment across Operations, Quality, Supply Chain, and global stakeholders.

Requirements:

·       Bachelor’s degree in Engineering, Science, or a related technical field.

·       8+ years of experience in the medical device or similar regulated industry, with a focus on manufacturing, NPI, or process engineering roles.

·       Hands-on experience in process development, equipment installation and commissioning, and FAT/SAT activities.

·       Demonstrated experience leading process improvement and cost-reduction initiatives.

·       Solid foundation in general engineering principles.

·       Proven expertise in process validation (IQ, OQ, PQ) within a regulated environment.

·       Working knowledge of Quality System Regulations (ISO13485 and/or 21 CFR 820), with experience in medical device risk management per ISO 14971

Core Competencies

·       Regulatory and Quality Focus – solid understanding of medical device regulations and manufacturing compliance

·       Technical Depth – Solid expertise in process development, equipment installation, and validation requirements

·       Execution Discipline – Effectively manages complex project timelines with structure and accountability

·       Risk-Based Thinking – Skilled in risk assessment, mitigation planning, and decision-making under uncertainty

·       Cross-Functional Collaboration – Works effectively across engineering, quality, operations, and global teams

·       Adaptability – Thrives in ambiguous environments with evolving requirements and accelerated timelines

Additional Information:

·       Salary – Up to S$12K + 1-month bonus

·       Contract duration: 12-month contract, extendable

·       Commencement Date: Immediate

·       Working days and hours: Monday to Friday, 9amto 6pm

·       Location: Bugis, frequent traveling to Johor Malaysia

Perform shift duties (12-hours shift) to support the running of production in the Module and ensure process readiness and worthiness for production.

Job Responsibilities:

● Follow SOP and carry out OCAP/OI as per specification
● Execute good disposition of lots in the line on thin film CMP tools
● Obtain data for lots affected by tool faults for disposition to minimize the held time for the lots. Always use SOP/CAS in lots disposition.
● Troubleshoot process related issues. Provide detailed and accurate passdown of lot disposition details.

● Ensure data completion for all information required to be filled up by Operators, Technician/AE part
● Analyze SPC charts using ViewChart. Respond to all SPC rules and follow OCAP correctly. Know basic annotation and achieve quality troubleshooting rate for SPC OOC/OOS points.
● Setup and troubleshoot issues in recipes/job files in all metrology tools within the Module. Do regular housekeeping of production job files.
● Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
● Participate in Module CIT programs to improve quality and productivity of the Module.
● Constantly monitor and feedback process issues to Engineers for further improvement.
● Coordinate with Manufacturing to ensure that work is carried out according to SOP to meet Module objectives.
● Ensure and follow good housekeeping and safety practice when works in the FAB or in the office area.
● Assist new Technician / AE on their On-The-Job-Training (OJT) by acting as their buddy.

Job Requirement:

• ITE / Diploma in Electrical / Electronics / Mechanical / Mechatronics Engineering
• Experience in handling Thin Film PVD Process and Wafer Fabrication process is required.
• Willing to learn and take 12 hours shift arrangement.
• Work independent
• Team player and initiative

ASPRI-IPI, the training arm of ASPRI, is a non-profit organisation dedicated to advancing the Process Industry in Singapore. We collaborate with industry leaders, government agencies, and subject matter experts to develop and deliver high-quality training programmes.

Join us on our mission to enhance the skills and safety of the Process Industry workforce, contributing to a safer and more productive industry for Singapore.

Position Overview

This is a 1 month temporary assignment supporting both the Operation and Service Quality units in ASPRI-IPI. This role is paid hourly.

Job Responsibilities include but not limited to:

1. Daily operation

i) Centre Opening (classroom / workshop / ushering / courseware retrieving for classes that have ended)

ii) Attendance taking

iii) Minor ad-hoc request from trainers

iv) Attendance preparation for new classes

v) Courseware packing

vi) Centre Closing (refreshment packing / Courseware storing (new class) / classroom / workshop)

2. Batching

i) Checking of post-courseware and inform Ops on the follow up

ii) Updating and verifying of batch log file to ensure accuracy

3. Evaluation

i) Post-evaluation scanning

ii) Update evaluation log file

iii) Verify evaluation log file

4. Safety Pass

i) Verify safety pass (WSQ/ASTER)

ii) Verify safety pass tracker (Jimily)

You should possess the following:

• Minimum Diploma preferably in Training and Adult Education sector;
• No experience required as On-the-job training will be provided;
• Ability to effectively manage time and schedules under tight deadline and pressure;
• Strong adaptability skill, able to work independently as well as in a team;
• Strong communication skills with good customer service aptitude;
• Proficiency in Microsoft Office and other IT applications;
• Willingness to work a flexible schedule, including shift duties on workday evenings and weekends (OT will be compensated accordingly)
• Working location at Jalan Papan (shuttle pickup at Chinese Garden MRT)
• Immediate starters preferred

As a Senior/Staff NAND Module Process Integration Engineer in the Singapore R&D department at Micron Technology Inc., you will be responsible for designing, developing, integrating, and implementing innovative and effective process solutions to improve next-generation 3D NAND Product Yield and Quality with competitive cost and performance within the required timeline.

Your responsibilities will include, but are not limited to, the following:

• Module Ownership: Lead one or more process modules related to the development and operation of a 3D NAND semiconductor integrated circuit.

• Specification definition: Define structural specifications and process requirements for assigned modules.

• Strategic Direction: Set a clear direction and vision for the module and have a well-defined continual improvement plan.

• Proactive Issue Resolution: Be proactive in identifying potential structure, electrical and reliability issues and addressing them early with process control. Solve problems with a model-based approach.

• Performance Optimization: Focus on structural development, electrical performance, parametric verification, and process control and manufacturability assessment and optimization.

• Material Innovation: Analyze materials physically, electrically, etc. and work with process groups, etc to select new material for development. Drive material changes from research into production.

• Design Experiments: Design and execute device and process experiments to perform process development and process integration. Extract, analyze, report and draw logical conclusions on experiments and clarify the statistical significance of the data.

• Team Leadership: Provide team leadership in module development with assembling and coordinating a development team including process engineers, etc.

• Decision-Making & Goal Setting: Make key decisions for the team, as well as provide clear direction, goals and metrics for success of the team.

• Innovation & IP Generation: Innovate to address complex problems through both design and process. And consider new options for improving and developing new technologies or devices. Patent disclosures are expected on a regular basis.

• Cross-Functional Coordination: Coordinate activities such as reticle tapeouts, flow/traveler changes, lot management, etc. across cross-functional teams to enable a project to proceed in a rapid and low error manner.

• Technology Transfer: Support the transfer of new technology from R&D to high volume manufacturing.

• Communication & Influence: Communicate key information and projects via presentations and group discussion and drive decisions.

• Continuous Development: Continually grow technical and management skills and pursue continued education via on-job training and training class.

Successful candidates for this position will have:

Must have:

• Passionate about semiconductor technology and innovation.

• Adept at data analysis, problem-solving, and process integration optimization.

• Excellent communication skills and capacity to collaborate within cross-functional teams.

Requirements:

Education:

• Bachelors or Masters or PhD in Electrical Engineering, Microelectronics, Chemical Engineering, Material Science or a related field

• Proficiency in scripting/programming/engineering/business intelligence/Analytics software, such as Python, SolidWorks, Tableau, Power BI, etc. is desirable.

• Minimum of 3 years of experience in the semiconductor industry in the Process Areas or Process Integration.

• Ability to develop a strong holistic end-to-end understanding of particular PI modules on new NAND technologies and related structural & electrical fail mechanisms.

• In-depth knowledge and direct experience with non-volatile memories (NAND) along with good understanding of the NAND process flow, the interaction of process & device, common yield & reliability issues are desirable.

• Experience in R&D and technology transfer within Semiconductor industry

• Committed to quality, collaboration, and continuous improvement.

• Ability to be self-motivated, and self-governing with proven ability to work in a demanding & dynamic environment.