Total 13,298 Others/Any job vacancies

RESPONSIBILITIES

Electrical:

·       Design of electrical systems accordance to IEC and Singapore Standards.

·       Design for HT/LT/ELV/ICA/ Earthing and Grounding System including design calculations,sizing’s and conceptual design drawings using advance tool and software; Cad,ETAP etc.

·       Design electrical conceptual design, SLD, project specifications, Schematics & Layout design (including library design), Cable Assembly Design & sizing.

·       Perform technical bid evaluation.

·       Work closely with Process, Mechanical, Piping and other relevant disciplines, and Quantity Surveyor.

·       Co-ordinate with clients, LEW/consultants on the technical requirements and attend technical discussions and meeting with authorities, developer, and contractors.

·       Develop interfaces for systems, sub-systems in electrical package.

·       Lead off-site/ outsource design engineers for large / multiple projects .

·       Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards.

·       Provide technical assistance to Construction team.

·       Attend Site check/verification as and when required.

·       Attend technical meetings with clients, vendors, LEW, Consultant, FAT and SAT

·       Prepare BOQ, Material Take off.

Instrumentation and Control:

·       Design of I&C systems accordance to IEC and Singapore Standards.

·       Prepare engineering drawings / documents such as; Plant Control system Configuration,CCR and equipment room layout, Instrument datasheets, location plan, I&CCable schedule, routing drawings, Instrument Hook up and Loop drawings.

·       Design Control Logic Diagrams; OLCS & CLCS according to the process.

·       CCTV and Communication system block diagram and layout.

Pre-requisites:

·       Minimum Bachelor’s Degree in Electrical/ Instrument Engineering.

·       Minimum 5 years of design experience in Power Electronics HV/MV/LT/ELV/ICA etc.,

·       Fresh graduates are welcome to apply.

·       Proficient with MS Office Program AutoCAD. Autodesk BIM/Revit will be an added advantage.

·       Knowledge on designing in 3D layout & ETAP will be an added advantage.

·       Familiar with Singapore standards, Code of Practices, electrical design & calculation will be an added advantage.

·       Good knowledge of valve selection, flow meter selection, sizing of valves, valve actuator, flow meters and Automation system DCS/PLC.

Oversees E&IC quality, inspections, and compliance for semiconductor projects, ensuring reliability of equipment, accurate documentation, and effective issue resolution across UPW and WWTP systems.

Contract: 2 Year

Salary up to $10000

Location: Woodlands

Job Responsibilities:

• Manage E&IC technical matters related to pumps, valves, pressure vessels, tanks, and skids, including reviewing technical drawings and P&IDs

• Perform incoming inspection of E&IC equipment to ensure quality, condition, and compliance with specifications

• Review batch records and quality documentation, ensuring accuracy and completeness

• Prepare and maintain document submittal registers and quality records

• Ensure all project E&IC quality documents are prepared, approved, and compliant with contract requirements

• Review E&IC equipment processes, logs, and monitoring requirements to ensure proper operation

• Analyze issues and perform problem-solving related to compliance, quality, and technical performance

• Collaborate with cross-functional teams (Project, Construction, Engineering, Supply Chain, Commissioning) to ensure product quality and timely delivery

• Support customers on E&IC quality issues, including root cause analysis, corrective actions, and closure tracking

• Coordinate with clients, regulatory bodies, and third-party inspectors for QA/QC compliance

• Conduct supplier and subcontractor quality assessments to ensure adherence to project requirements

• Report and track non-conformance (NCR) issues and escalate to QA Manager in a timely manner

Requirements:

• Diploma or Degree in Engineering or related discipline

• Minimum 3 years of experience in Semiconductor / Electronics industry

• Knowledge of UPW (Ultra Pure Water) and WWTP (Waste Water Treatment Plant) systems is required

• Strong understanding of E&IC equipment, QA/QC processes, and technical documentation

• Good communication and stakeholder management skills

• Able to work in cross-functional teams and manage multiple priorities

• Strong problem-solving and analytical skills

• Positive attitude with strong ownership and initiative

PERSOL Singapore Pte Ltd • UEN No. 200007268E • EA License No. 01C4394 •EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies.You acknowledge that you have read, understood, and agree with the Privacy Policy.

Key Responsibilities:

• Implement, maintain, and administer IT infrastructure including networks, operating systems, storage, and backup systems
• Collaborate with system development teams on system design, implementation, integration, and testing
• Provide 24x7 on-call support on a rotational basis, including executing corrective actions to resolve production issues and minimize system downtime
• Develop and maintain technical and program documentation to support effective planning and execution
• Liaise with customers and external vendors to troubleshoot and resolve technical issues

Requirements:

• Minimum of 3–5 years of relevant working experience
• Bachelor's Degree Holder (Open for Fresh Graduates)
• Solid understanding of IT infrastructure, including operating systems and networking
• Strong interest in emerging technologies and a willingness to continuously upgrade skillsets

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to bianca@talentsis.com.sg for immediate processing.

(EA Reg No: 20C0312)

Job Description

• Industry/ Organization Type: Industrial Equipment Manufacturer
• Position Title: Customer Consultant / Service Sales Engineer
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 8.30am – 5.30pm)
• Salary Package: Basic salary up to $4,800 + Transport Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Act as the customer’s main contact person and handle customer-related matters
• Manage a group of accounts, identify key customers, and create action plans to grow these accounts
• Identify solutions needed to meet customer needs and work closely with the Technical Support Team to make them available
• Identify opportunities with existing and new customers, and update them on service value-added offerings
• Identify sales opportunities, prepare proposals, and coordinate related processes to maintain high customer satisfaction and strong customer relationships
• Support customer growth and loyalty through ongoing assistance and follow-up
• Handle customer complaints by working with internal teams to investigate issues, assess possible solutions, and recommend options to customers
• Arrange regular service reviews with customers and the Operations team for urgent jobs and key issues
• Understand customer and industry needs, and support pricing and sales strategies
• Prepare and review contract terms and conditions
• Present proposals to customers
• Share market feedback, including competitor updates, customer expectations, and industry trends
• Perform other related duties as assigned

APPLY NOW!!!

• Bachelor’s degree in Engineering with at least 2 years of relevant sales experience
• Knowledge of HVAC systems, chiller plants, airside systems, energy services, and building services is an advantage
• Able to read and understand engineering documents and respond professionally to customer questions or complaints; able to understand written instructions, emails, and reports
• Able to identify problems, gather data, and make sound conclusions
• Customer-focused, with a drive to propose suitable options to meet customer needs
• Willing to learn new solutions and improve skills to better support customers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82096 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

LEE TECH ENGINEERING PTE LTD
We are a well-established construction company. In line with our expansion plans, we invite suitably qualified individuals to fill the following position:

PROJECT ENGINEER

Responsibilities:

• Handle documentary work for tenders, progress reports, handover documents, and as-built drawings.
• Monitor project progress and compare it with the project schedule.
• Respond to customer complaints and feedback.
• Troubleshoot air-conditioning system issues.
• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Ensure compliance with applicable codes, practices, QA/QC policies, performance standards, and specifications.
• Communicate with clients to understand their needs and represent them in the field.
• Assign responsibilities and mentor the project team.
• Cooperate and communicate effectively with the project manager and other participants to provide assistance and technical support.
• Independently motivated, able to review engineering deliverables, and take corrective actions as needed.

Requirements:

• Minimum relevant certificate in Mechanical Engineering.
• At least 2-3 years of related working experience is preferred.
• Open to candidates of all experience levels.
• Proficient in MS Project and AutoCAD.
• Strong communication skills.
• Outgoing, willing to work extra hours, and possess a positive working attitude.
• Able to work independently and multi-task in a fast-paced environment.
• Candidates who can start immediately or with short notice are preferred.

Interested candidates, please email your resume to leetech@leetech.com.sg.

Other Information

- Location: Island Wide

- Salary Range : $3,000 - $4,500

Our client is a Computer and Network Security Industry. Due to business needs, they are now recruiting a Software Engineer to be part of their Team for ongoing transformation projects. They are located in the West - easily accessible.

Responsibilities:

• Develop, enhance, and maintain secure software applications using PowerShell, C++, Flutter, Dart, and Python.
• Incorporate UI/UX best practices to create user-friendly, efficient, and engaging interfaces.
• Review, debug, and optimize code to ensure performance, reliability, and security standards are met.
• Design and strengthen endpoint security capabilities, including malware and ransomware detection, exploit prevention, and intrusion detection mechanisms.
• Partner with security teams to implement secure coding standards and remediate identified vulnerabilities.
• Collaborate with cross-functional stakeholders, including product managers, security analysts, and designers, to drive project success.
• Contribute to project planning, sprint reviews, and Agile development cycles.

Requirements:

• Min Diploma Cybersecurity, Computer Science, or a related field.
• Experience with scripting or coding abilities in languages such as PowerShell scripting, C++, Flutter, Dart, and/or Python.
• Knowledge of cybersecurity concepts and network fundamentals

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R25157233 (Loh Pooi Keng)

Job Description & Requirements

Job Scope

· Assist Project Manager to coordinate with Client and Subcontractors.

· Prepare and Submit Daily Site Record

· Prepare method statement and risk assessment

· Prepare shop drawings for construction

· Update programme and progress of the project

· Attend progress meeting and taking meeting minutes

· Liaise with QS for preparing Progress Claim

Checking subcon’s work done for payment certifying purpose

Requirement

· Degree in Civil Engineering recognized by the PE Board

· Minimum 3 years’ experience in Civil Engineering / Infrastructure construction projects, e.g. drainage work, road and bridge work, reinforcement concreting work, piling work, earthwork, etc.

· Able to work out method statement and risk assessment independently.

· Proficient in MS Word, Excel, Powerpoint, AutoCAD, MS Project.

Job Responsibilities

· Support supplier sourcing activities, including identifying and evaluating suppliers for fabrication, integration, and contract manufacturing services in alignment with business needs.

· Assist in supplier qualification and development to ensure reliable supply and meet quality, cost, and delivery requirements.

· Participate in cost analysis and negotiation with suppliers to achieve competitive pricing for materials and services.

· Support the preparation and execution of commercial agreements and purchase terms with suppliers.

· Work closely with Engineering and Quality teams to define specifications, ensure compliance with quality standards, and support supplier quality improvement initiatives.

· Contribute to cost-saving and cost-reduction initiatives, including value engineering and continuous improvement activities.

· Support implementation of operational excellence initiatives such as GEMBA, Kaizen, and VAVE programs.

· Maintain accurate procurement data and support planning activities using systems such as SAP and MRP.

· Build and maintain good working relationships with suppliers and internal stakeholders to ensure smooth operations.

---

Job Requirements

· Diploma or Degree in Mechanical Engineering, Electrical Engineering, Business Administration, Supply Chain Management, or a related field.

· Minimum 5 years of relevant experience in procurement, sourcing, or supply chain within manufacturing environments (ODM/OEM/CM) preferred

· Diploma holders with at least 3 years of relevant experience are encouraged to apply.

· Basic knowledge of procurement processes, supplier management, and cost analysis.

· Familiarity with ERP is an advantage.

· Good interpersonal, communication, and stakeholder management skills

· A proactive team player with willingness to learn and grow in a fast-paced environment.

Duties and responsibilities

- Conduct inspections of electrical installations and report findings on site.

- Coordinate with clients and contractors for Electrical Maintenance work.

- Carry out on-site testing, maintenance and troubleshooting of electrical systems

- Prepare reports on findings and recommendations from inspection and maintenance work.

- Lead and manage a team of technical officers/ technicians.

- Attend to Electrical incidents and power outages. Work closely with clients and stakeholders to maintain reliability of their Electricity Supply.

- Liaise with clients and provide advice on their Electrical systems

- Plan, manage and execute Electrical project works.

- Assist with Electrical Design and consultancy work.

- All other ad-hoc duties as requested by supervisor.

Skills and Qualifications:

Diploma in Engineering (Electrical) preferred

With class 3 driving license preferred

Ability to work with others as a team.

Punctual and positive attitude

Comfortable with on-site environment

Analytical and problem solving skills, able to quickly make sense of a situation and propose solutions.

Expect to work odd hours depending on work schedule and requirements

Candidates with engineering background but no prior experience are welcome to apply ractors

Responsibilities

• Execute one or more industrial automation projects in parallel

• Report to the Lead engineer and/or Project Manager and deliver the project in compliance to customer specifications

• Responsible for the Draft technical design for project and prepare associated documentations/drawings

• Develop PLC program and HMI graphics as per project requirements

• Conduct internal hardware & software integrated testing and Factory Acceptance Test

• Conduct testing & commissioning and Site Acceptance Tests at customer’s site

Requirements

• Minimum 2 years relevant experience in automation industry with DCS/PLC project execution

• Diploma/Bachelor Degree in Engineering related disciplines.

• Knowledge of PLC, SCADA, instrumentation and safety instrumented systems will be an advantage.

• Working knowledge with Siemens Step-7, WinCC and PCS7 preferred

• Possess good interpersonal and leadership skills.

• Able to work independently and as a team player

• Proficient in English (written and verbal)

• Able to travel within short notice & to developing countries

• Permanent Residents & Singaporeans preferred

Responsible for all site related operations, management of subcontractors and manpower resources assigned.

Responsible for taking and handing over of site, equipment and services with main con and/or customers and that it is constructed according to approved plans

Ensures that projects that are assigned to him/her are completed according to scope and schedules and according to approved plans

Prepare MSRA for timely site submissions

Attend site meetings whenever required and liaise with stakeholders pertaining to site matters.

Coordinate with all relevant stakeholders to ensure any problems arising in the course of the project to be highlighted to all relevant parties with resolutions.

Industry: Contract Logistics

MNC Environment

Permanent role (AWS Guaranteed + VB)

Responsibilities:

• Lead Operations Excellence projects that leverage on in-depth data analysis and lean principles to close operational gaps and provide catalytic support to the efficiency across multiple sites
• Coordinate with internal subject matter experts to drive project development, align on expectations, and overcome project risks
• Manage audit of sites, provide audit reports, define action plan and monitor action plan
• Contribute to the OpEx community by sharing knowledge of best practices and new solutions, organising technical trainings and focus group workshops, developing team collaterals, etc.

Build Internal OpEx Culture

• Support the roll out of an OpEx program across all logistics warehouse operations within the company, providing coaching and training to necessary stakeholders
• Support the development of a lean knowledge management framework that organises, strengthens, and diversifies the learning journey of the OpEx community in lean tools and operational excellence

Transform Customer Journey

• Work closely with Hub / Operation Managers to identify new customer needs and develop action plans to close gaps in service levels or expectations
• Collaborate with the subject matter experts to identify implementation opportunities for new solutions or technology that would catalyse the operational excellence standards of all logistics sites

Quality, Health, Safety, and Environment (QHSE) Responsibilities:

• Participate in the set-up and follow-up of internal standard procedures to enhance productivity and transparency
• Maintain acceptable Health, Safety and Environmental risk levels in his/her area of responsibility
• Ensure compliance with applicable legal requirements

Requirements:

• Degree or Masters in Logistics, Supply Chain Management, Engineering, or Business with a relevant specialization
• Awareness and understanding of lean principles and continuous improvement tools
• Strong in data crunching and analysis
• Proficient in Microsoft PowerPoint and Excel (including pivot tables)
• Good and adaptive team player with strong interpersonal skills

All successful candidates can expect a very competitive remuneration package and acomprehensive range of benefits.

Kindly email your resume in a detailed Word format to carlo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street#08-09 PLUS Building Singapore 049705

+65 69509747   

EA License Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Job Description

Decarb Engineering & Construction Pte Ltd is a Singapore-based M&E EPC contractor specialising in Fire Protection, ACMV, and ELV systems, holding bizSAFE Star and ISO 9001/14001/45001 certifications. We are seeking a Network Engineer to design, configure, and commission the IP networks underpinning our security and fire alarm system installations across commercial, industrial, and institutional projects.

Roles & Responsibilities

• Design, configure, and commission IP networks for ELV systems — IP CCTV/surveillance, access control, and networked fire alarm systems.
• Set up and manage network switches, VLANs, IP addressing schemes, and PoE infrastructure for security and life-safety devices.
• Configure and integrate addressable fire alarm panels (e.g. EST3/EST4, Notifier, Simplex) into networked architectures.
• Implement system integration via Modbus TCP, BACnet/IP, ONVIF, and related protocols, including BMS integration.
• Conduct on-site testing, commissioning, and fault diagnosis of networked security and fire alarm systems.
• Prepare network architecture drawings, IP schedules, method statements, and as-built documentation.
• Liaise with consultants, main contractors, system vendors, and authorities (SCDF) to ensure compliance and smooth handover.
• Provide post-handover troubleshooting, support, and maintenance for networked ELV systems.
• Ensure all works comply with relevant Singapore codes (SS 645 / CP 10, SS CP 52) and WSH requirements.

Requirements

• Diploma or Degree in Electrical/Electronic Engineering, Computer/Network Engineering, Infocomm, or related discipline.
• 2–5 years' experience in ELV, security, or fire alarm systems, preferably within the M&E or building/construction industry.
• Solid IP networking fundamentals — TCP/IP, subnetting, VLANs, managed switches, PoE.
• Hands-on experience with IP CCTV, access control, and/or networked fire alarm systems.
• Familiarity with integration protocols (Modbus TCP, BACnet/IP, ONVIF) and BMS integration — an advantage.
• Knowledge of Singapore fire alarm and ELV codes (SS 645 / CP 10, SCDF requirements) preferred.
• CCNA/CCNP or equivalent networking certification advantageous.
• Strong fault-diagnosis and troubleshooting skills; able to work across multiple site locations.
• Valid Class 3 driving licence a plus.
• Good communication skills and ability to work within multi-disciplinary project teams.

RESPONSIBILITIES

·       Provide technical and debug assistance included product training.

·       Handle product, technical, warranty, spare parts enquiries and complaints from end-customers, distributors, dealers and e-commerce platform.

·       Study in-warranty claims, compiling of F-Cost report.

·       Monitor quality issues and abnormal defect to make report to factory, take necessary action against warehouse, distributor and factory.

·       Create training materials, technical procedures, service manuals and part guides for distributors.

·       Handle defective unit exchange to end customer, follow up defective unit repair, checking and grading at contractor before return to warehouse.

·       Handle COC renewal, COC and WELS testing and registration for new product.

·       Assist distributor to conduct field test for new products.

·       Support establishment of service management and service centre for local and export market.

REQUIREMENTS

·       Minimum Diploma in Engineering or related discipline

·       Minimum 2 years of experience of experience in consumer electronics after sales management industry.

·       Strong product technical knowledge in home appliances and audio visual.

·       Proficient in MS Office applications.

·       Ability to work under pressure.

Please submit resumes to jason.chow@oaktree.com.sg with the following details in MSWord format:

·      Position applying for

·      Current remuneration

·      Expected remuneration

·      Notice period

Jason Chow Yew Fai

EA License No :       06C4642

EA Reg No :           R25158800

We regret that only shortlisted candidates will be notified.

Join a Leading Engineering & Infrastructure Organisation

We are looking for passionate and driven Engineering graduates and professionals to join a reputable organization supporting critical infrastructure and engineering operations in Singapore.

Why Join Us?

• Gross Salary : Up to $5,000+++ per month

• Monthly AWS allowance

• Generous performance bonus of up to 3 months

• Starting 18 Days Annual Leave

• Family and Childcare Leave entitlement

• Structured training and career progression opportunities

• Stable career with long-term growth prospects

Key Responsibilities

• Support engineering operations, maintenance, and improvement initiatives.

• Conduct troubleshooting, investigations, and root cause analysis of engineering issues.

• Analyse system performance data and recommend reliability improvements.

• Assist in engineering projects, testing, commissioning, and asset enhancement activities.

• Prepare technical reports, documentation, and work instructions.

• Collaborate with cross-functional teams to improve operational performance and safety standards.

• Ensure compliance with engineering, quality, and safety requirements.
  

Requirements

• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Electronics Engineering, Mechatronics Engineering, or other relevant Engineering disciplines.

• Candidates with relevant engineering, maintenance, project, reliability, manufacturing, transportation, infrastructure, utilities, aerospace, marine, or industrial experience are encouraged to apply.

• Strong analytical and problem-solving skills.

• Good communication and interpersonal abilities.

• Ability to work independently and as part of a team.
  

Apply Now

If you are looking to kickstart or advance your engineering career with an established organization offering attractive compensation, strong career development, and excellent benefits, we would love to hear from you.

Submit your updated resume today for consideration.

Please send in your resume to :

edward.liau@cornerstoneglobalpartners.com or whatapp me at +65 96578518

Edward Liau Xianke R1217423

Cornerstone Global Partners

License Number: 19C9859

You will be part of a team responsible for regulating development and building works in the public streets as well as road structure safety zone to safeguard the road structure safety zone and public streets.

You will be involved in reviewing the design of both temporary and permanent works affecting the road structures and public streets, engineering risk assessment and engineering analysis, method of construction and instrumentation proposal, as well as review of geotechnical and structural instrumentation data, ensuring the construction is with accordance to LTA’s standards. In addition, you would also be involved with projects assets or Infrastructure are integrated with adjoining and adjacent developments, processing and coordinating the successful project handing over to the Authority.

Besides the opportunity to work with developers, their architectural and engineering consultants and contractors, you will also coordinate and liaise with LTA architects, planners , engineers, Asset owners on projects affecting road and road related facilities and systems.

You will also be expected to facilitate and coordinate other kinds of asset taking over procedures from developers, private owners, to the Authority.

• Knowledge in Civil / Structural Engineering

• Resourceful, analytical, able to thrive in a fast pace and demanding work environment

• Self-motivated, able to multi-task and keen to learn

• Possess initiative and keen interest to develop professional skillset

• Able to work independently and a team player with good leadership, interpersonal and communication skills

• Proactive and resourceful

• Familiarity with AutoCAD and proficient in MS Office and document control systems is an advantage

• Those with relevant experience in civil engineering design and strong understanding of construction drawings and as-built documentation works will have an advantage

As part of the shortlisting process for the role, you may be required to complete a medical declaration and / or undergo further assessment.

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Key Responsibilities:

• Collaborate with cross-functional teams to define specifications for mechanical systems and sub-systems.
• Lead the design and selection of mechanical components, perform tolerance analysis, and develop motion systems.
• Oversee component evaluation, system-level integration, and transition to manufacturing and field deployment.
• Manage internal or external design partners in joint development initiatives.

Requirements:

• Proven experience in mechanical design, particularly involving automated machines.
• Strong background in thermal simulation and analysis, including finite element modeling (FEA)
• Preferably from advanced equipment sectors such as semiconductors, though candidates from other high-precision industries are welcome.
• Skilled in 3D CAD software (e.g., SolidWorks or similar platforms)
• Minimum of 3 years of hands-on experience in relevant mechanical engineering roles
• Solid understanding of mechanical fundamentals, including tolerance analysis and motion control systems

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Micron Technology Inc. is a Fortune 500 company & employs about 45,000 workers worldwide, with HQ in Boise, ID. Micron offers the industry’s broadest portfolio of memory solutions—starting with foundational DRAM, NAND, and NOR Flash memory, extending to SSDs, MCPs, HMCs, and other memory-based systems. Micron is expanding and now starting full-fledged NAND research and development in Singapore co-locating with high volume manufacturing to speed up innovation. Micron has several world class SSD products (NAND) which have revolutionized speed feeding into GPU’s for superior AI performance and achieving blazing fast performance for gaming and pro workloads. Micron is one of the most prolific patent applicants in the world with 60,000 patents granted and still growing.

As a Staff/Principal Engineer, you will be a part of groundbreaking next generation NAND research & development dry etch team driving critical modules listed below. The position promises ample opportunities for innovation, collaboration and testing a new dimension and scaling with next generation NAND. You will work directly with process integration and other process areas such as Wet etch, CVD, Diffusion, Metals, Lithography & Dry Etch. You will be involved with innovative and outstanding dry etch chambers & own the process roadmap to meet program and yield goals. Your responsibilities include, but not limited to:

Main Responsibilities:

• As a CMP Process Development Engineer, you will develop and optimize chemical mechanical planarization procedures. These procedures aim to improve product quality and reliability for the next generation of Micron's memory parts.

• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts

• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications

• Initiate and manage experiments to widen process margins as well as to evaluate manufacturability of next node solutions

• Extensively collaborate with vendors to develop processes that meet integration requirements for current and next-generation 3-D NAND nodes

• Incorporate best known manufacturing methods into early development phase of upcoming nodes

• Design and implement advanced process monitoring and control methodologies

• Provide strategic roadmap for N+, N++ and future NAND Nodes

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures, and equipment

• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers

• This position requires communication and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property Protection policy is necessary

Other Responsibilities:

• Mentor new hires and less experienced team members on CMP fundamentals, process development, and Micron systems

• Engage with Procurement & Operations Central Teams and other partners both locally and globally pushing for breakthrough solutions

• As a technical expert, lead or drive team or sites on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost, and productivity improvement meetings

Artificial Intelligence

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Education/Job requirements:

• Masters /PhD with 5-10 years or Bachelors degree with 7-12 years of relevant working experience in the semiconductor industry with a background in Chemical Mechanical Planarization (CMP) Process in 300mm wafer fabrication

Must Have Technical Skills

• Hands-on experience CMP equipment operation such as AMAT (LKP), EBARA-300X and next generation CMP equipment, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads

• Experience in dielectrics/metals CMP process development on 3D NAND or other memory technology

• Understanding of various integration and structural impacts and constraints related to film deposition and other upstream/downstream processes

Must Have Soft Skills

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Strong collaboration and communication skills (verbal and written).

• Self-driven, adaptable, and able to manage multiple projects.            

• Proven ability to take calculated risks and execute novel solutions.

• Recognized as a mentor, team player and technical expert with the ability to solicit feedback, accept input, and analyze success/failure.

Highly Desirable/Preferred skills or experience

• An understanding of the general process steps and process flow for memory processing planar and vertical NAND memory.

• Strong interest in Data science, modelling, and drive to use/adopt AI to optimize workflows.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We’re searching for an Associate Equipment Engineer to be part of our Thin Film CVD department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• To assist CVD equipment engineers to sustain equipment performance and perform schedule & ad hoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assisting new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More About You:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment preferred
• Fresh Diploma graduates with keen interests are welcome to apply, training will be provided
• Non-diploma holders with 3 years’ direct experience in CVD equipment can apply
• Basic engineering knowledge
• Some knowledge of Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

·      Provide on-site technical support to front-end semiconductor OEM and fabrication customers for fluid system, gas delivery, and process application challenges.

·      Diagnose and resolve complex tool, system, process, and fluid delivery issues impacting customer uptime, yield, reliability, and operational performance.

·      Conduct root cause investigations and recommend corrective and preventive actions to resolve customer concerns.

·      Support tool installation, startup, qualification, and troubleshooting activities within customer facilities.

·      Evaluate customer fluid systems and identify opportunities to improve performance, reliability, safety, and operational efficiency.

·      Provide technical expertise and best-practice recommendations for high-purity fluid systems and gas delivery systems.

·      Lead technical discussions with customer engineering teams and establish credibility through deep application and process knowledge.

·      Develop and maintain strong technical relationships with key stakeholders within front-end semiconductor OEM and fabrication customers.

·      Work closely with Sales to identify, develop, and promote application solutions, products, and engineering services opportunities.

·      Conduct customer site assessments and technical evaluations to identify opportunities for process improvements and solutions deployment.

·      Design and develop application solutions proposals in collaboration with Sales, Engineering Services, and Commercial Proposal teams.

·      Support technical clarification meetings, solutions presentations, and customer workshops as required.

·      Collaborate with global Engineering Services teams, Product Engineering, Product Management, and Strategic Account teams to resolve customer challenges and support business growth initiatives.

·      Provide customer insights, application feedback, and market intelligence to support product development and strategic account planning.

·      Support internal associates' technical knowledge development through product, application, and semiconductor process training.

·      Support the development and execution of commercialization plans and strategic initiatives to grow semiconductor products, application solutions, and engineering services business.

·      Leverage internal technical resources and subject matter experts to deliver differentiated customer solutions and experiences.

·      Extend technical support to strategic regional customers and distributor partners as required

·      Other duties and assignments as assigned from time to time.

Requirements

·      Bachelor's degree in Mechanical Engineering, Chemical Engineering, Electrical Engineering, Materials Engineering, Instrumentation Engineering, or a related engineering discipline.

·      Minimum 5 years of relevant experience in front-end semiconductor OEMs, semiconductor fabrication facilities, application engineering, process engineering, tool engineering, field engineering, or technical customer support roles.

·      Hands-on experience supporting semiconductor manufacturing equipment, including installation, startup, qualification, troubleshooting, and performance optimization activities.

·      Strong understanding of semiconductor manufacturing processes such as Deposition, Etching, Photolithography, Implantation, and/or related wafer fabrication technologies.

·      Experience with high-purity fluid systems, gas delivery systems, and associated semiconductor process applications.

·      Knowledge of semiconductor tool architecture, subsystem interactions, and fab/sub-fab operations.

·      Familiarity with common failure modes including leaks, particle generation, flow performance issues, contamination risks, and system response challenges.

To find out more about this opportunity, please contact Lionel Liew at lionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No:R1330693

ST Engineering is a global technology, defence andengineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers inmore than 100 countries. The Group uses technology and innovation to solvereal-world problems and improve lives through its diverse portfolio ofbusinesses across the aerospace, smart city, defence and public securitysegments. Headquartered in Singapore, ST Engineering ranks amongthe largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industryleader in cybersecurity with over two decades of experience, we deliver aholistic suite of trusted cybersecurity solutions to empower cyber resiliencefor government and ministries, critical infrastructure, and commercialenterprises. Backed by our indigenous capabilities and deep domain expertise,we offer robust cyber-secure products and services in cryptography,cybersecurity engineering, digital authentication, SCADA protection, audit andcompliance. We specialise in the design and build of security operationscentres for cybersecurity professionals and provide managed security servicesto strengthen the cybersecurity posture of our government and enterprisecustomers.

Job Overview:

As a Senior SoftwareEngineer, you will lead the architecture, design, and development of highlysecure enterprise-grade applications and Outlook plugins with advancedcryptographic functionalities. You will serve as a technical authority, guidingengineering teams and influencing strategic decisions to ensure robust,scalable, and secure solutions. This role requires deep technical expertise,leadership skills, and the ability to drive innovation across complex systems.

Key Responsibilities:

• Define and own the software architecture for mission-critical applications and plugins, ensuring security, scalability, and maintainability.
• Lead the design and implementation of advanced cryptographic solutions (AES, RSA, ECC, PKCS#11) and enforce compliance with industry standards.
• Mentor and coach engineering teams, fostering best practices in secure coding, performance optimization, and software quality.
• Collaborate with product managers, security experts, and stakeholders to translate business requirements into technical strategies.
• Conduct architecture reviews, code audits, and risk assessments to maintain high security and reliability standards.
• Drive innovation by evaluating emerging technologies and integrating them into the product roadmap.
• Oversee source control strategies, CI/CD pipelines, and ensure robust versioning and backup processes.
• Represent the engineering team in customer and executive-level discussions, providing technical insights and recommendations.
• Prepare and maintain comprehensive technical documentation for architecture and design decisions.

Required Qualifications:

• Minimum 10 years of professional experience in C++ and C# development, with at least 5 years in a technical leadership or architecture role.
• Proven track record in designing and delivering secure Windows-based applications and Outlook plugins.
• Expertise in cryptographic algorithms, protocols, and secure software design principles.
• Strong proficiency with development tools (Visual Studio, Git), CI/CD systems, and debugging techniques.
• Exceptional problem-solving skills and ability to make high-impact technical decisions.
• Excellent communication and leadership skills, capable of influencing cross-functional teams and stakeholders.

Preferred Qualifications:

• Experience with enterprise security frameworks and compliance standards (e.g., FIPS, GDPR).
• Familiarity with Agile/Scrum methodologies and DevSecOps practices.
• Contributions to open-source projects or published technical papers in security or software architecture.

Work location: Jurong East

Find out more:  https://www.stengg.com/cybersecurity

STEngineering believes in fostering a culture where team members are encouragedto overcome challenges, explore new ideas, and work together to succeed. Wevalue individuals who are determined to push beyond the boundaries, and have athirst for knowledge, continuous learning, and self-improvement.

• Well Established Company
• Salary $2550 - $3650 (Basic) + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas Crescent (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.30am to 5.15pm

Job Responsibilities:

• Prepare and produce AutoCAD electrical drawings.
• Prepare production drawings, including detailed BOM list.
• Generate as-built drawings based on panel testing, FAT and SAT, as required.
• Attend meetings with Sales/Project teams to resolve drawing-related issues and liaise with consultants/customers on design matters and drawing preparation.
• Able to travel to Malaysia. Able to perform overtime as and when required.
• Carry out urgent tasks and drawing assignments as directed by the superior.
• Provide support to Project Engineers when additional manpower is required.
• Attend panel Factory Acceptance Tests in Singapore or Malaysia, as required.

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Minimum 1 year of relevant experience
• Proficiency in AutoCAD will be an added advantage

Candidates are encouraged to apply this position via ApplyNow button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will becontacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our esteemed client in the IT industry is seeking a Full Stack Engineer (React/ Node.js) to join their dynamic team:

• Employment Type: 1-year renewable contract
• Position: Full Stack Engineer (React / Node.js)
• Location: Novena
• Working Hours: Monday to Friday, Office Hours
• Salary Package: Basic + Bonus + Medical Benefits

Job Responsibilities:

• Provide technical oversight for the web portal post-migration, troubleshooting issues related to UI/UX rendering, CMS templates, API integrations, and data ingestion to ensure a smooth transition into steady-state operations.
• Develop and implement new front-end components using React/Next.js and back-end logic using Node.js/TypeScript. This includes building complex data checkers, search tools, and personalized user features.
• Design and maintain secure integrations with internal back-end systems, external datasets, and secure file transfer protocols, ensuring the robust handling of API keys and tokens.
• Configure modules, workflows, and metadata within a headless CMS environment (Directus or similar), ensuring the platform remains intuitive for content and product teams.
• Lead UAT defect resolution and implement automated testing suites. Ensure all code meets strict accessibility (WCAG), performance, and security standards (including VAPT remediation).
• Actively participate in agile ceremonies (sprint planning, retrospectives) and collaborate with designers, product owners, and QA teams using GitLab for version control and CI/CD.
• Maintain comprehensive technical documentation, including system architecture updates and release notes.

Job Requirements:

• Strong hands-on experience with Node.js, TypeScript, React, and Next.js, with the ability to build and maintain full stack web applications.
• Experience working with Directus CMS or similar headless CMS platforms, including configuration of modules, workflows, and content components.
• Good understanding of REST APIs, JSON, OAuth2, and API security, with experience integrating internal and external systems.
• Familiarity with GitLab, CI/CD pipelines, DevSecOps practices, Docker, and containerised deployments.
• Knowledge of cloud and web infrastructure, preferably AWS services such as EC2, S3, CDN, and Load Balancers.
• Experience implementing automated testing (unit, integration, end-to-end), code quality checks, accessibility compliance (WCAG), and performance optimisation.
• Strong troubleshooting and debugging skills across frontend, backend, and cloud environments, with the ability to support production systems effectively.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793