Total 12,767 Others/Any job vacancies

About the Role

We are seeking a highly skilled L2 Network Operations Engineer to join our Network Operations team. This role is pivotal in maintaining network stability, managing critical incidents, and ensuring procedural readiness for high-severity events within our Cisco-based Data Center environment. The ideal candidate will take ownership of emergency access protocols, ensuring seamless coordination during outages and maintaining operational excellence.

Key Responsibilities

Critical Incident Response (L2):

• Act as the senior escalation point for normal network incidents and failures.
• Lead fault isolation, root cause analysis, and resolution for Cisco Nexus CORE network devices (N2K, N5K, N7K, N9K).
• Provide technical guidance to L1 engineers during critical situations.

Procedural Design & Documentation:

• Develop, document, and implement clear emergency procedures for responding to severe hardware failures (e.g., fan/thermal events).
• Ensure procedural readiness for rapid Data Center intervention during critical incidents.

Access Management & Compliance:

• Manage and maintain the Access Request (CAR ID) process or equivalent emergency access protocols.
• Ensure all access documentation and approvals are in place to prevent service delays during emergencies.

Data Center Access Coordination:

• Liaise with Data Center Operations and Customer Cage teams to pre-clear procedural dependencies.
• Ensure no barriers exist to immediate access for urgent network repair or recovery activities.

Operational Management:

• Support daily network operations and configuration management of Cisco network devices.
• Provide operational support for Cisco Firewall, Cisco ISE, and related systems.
• Maintain a basic understanding of Windows VMs used in operational environments.

Process Improvement:

• Drive ITIL-based process optimization, focusing on Incident, Problem, and Emergency Change Management.
• Identify and eliminate procedural bottlenecks that affect network uptime and availability.

Qualifications & Requirements

Technical Skills:

• 3–5 years of hands-on experience managing and supporting Cisco Data Center network devices.
• Strong knowledge of Cisco Nexus platforms (N2K, N5K, N7K, N9K).
• Working experience with Cisco Firewalls and Cisco Identity Services Engine (ISE).
• Familiarity with ITIL processes (Incident, Problem, and Change Management).

Certifications:

• Cisco Certified Network Associate (CCNA) – Mandatory.

Education:

• Bachelor’s Degree in Computer Science, Information Technology, or a related field (or equivalent experience).

Availability:

• Must be available to work in a 24x7 operations environment, including on-call rotation for critical issues.

Our client is an established civil engineering contractor involved in large-scale infrastructure and transport development projects in Singapore. With ongoing project expansion and increasing adoption of digital construction practices, they are seeking an Assistant Manager (BIM Technology & Digitalization) to support BIM implementation and digital engineering initiatives across project teams. They are located in the (North) – easily accessible.

Responsibilities:

• Oversee BIM implementation for infrastructure and construction projects in accordance with BIM Execution Plan (BEP) and project digital delivery requirements.

• Coordinate multidisciplinary BIM models covering civil, structural, architectural, and M&E trades.

• Perform model coordination and clash detection using BIM platforms to identify design conflicts.

• Conduct technical drawing screening and model verification against engineering specifications.

• Implement digital construction workflows including 4D planning and model-based documentation.

• Support integration of M&E trade coordination within BIM environments.

• Maintain BIM templates, object libraries, and project modelling standards.

• Facilitate BIM coordination with consultants, contractors, and project teams through a Common Data Environment (CDE) platform.

• Support temporary works modelling and structural propping arrangements within digital construction models.

Requirements:

• Degree in Civil Engineering, Construction Management, or M&E Engineering.

• Minimum 5 years of manager in BIM technology or digital engineering experience within construction or infrastructure projects.

• Experience supervising or guiding BIM engineers and modelling teams.

• Hands-on experience with Autodesk Revit, Navisworks, and BIM coordination tools.

• Must be strong with BIM execution planning, digital construction workflows, and project model coordination.

• Exposure to M&E trade modelling and construction drawing review.

• Experience supporting digitalisation initiatives within A1 main contractor or large infrastructure projects preferred.
  

  Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

  We regret that only shortlisted candidates will be notified.

  Email Address: jobs@recruitpedia.sg
  EA License No: 19C9682
  EA Personnel No: R22104769
  EA Personnel Name: Ong Boon Kiet (Travys)

Role Overview

The M&E Engineer (Night Shift) will be deployed full-time during the A&A / construction period to oversee night works, coordinate site execution, and ensure all M&E works are completed on time, in compliance with design intent, contract specifications, local authority requirements, and client standards. The role supports project management, site supervision, testing and commissioning, contractor coordination, variation management, handover, and defects follow-up through the Defects Liability Period.

​Key Responsibilities:

• Supervise and coordinate night-shift M&E works on site to ensure safety, quality, progress, and compliance with approved drawings, specifications, codes, and employer requirements.
• ​Act as the site-based M&E representative to administer contractor and subcontractor works, monitor progress, and promptly flag delays, clashes, risks, and deviations to the project lead/client.
• ​Review and comment on shop drawings, material submissions, samples, method statements, mock-ups, test reports, and as-built drawings within the M&E scope.
• ​Attend and coordinate site, technical, and progress meetings; support selected daytime meetings when required by the client/project team.
• ​Witness testing and commissioning, pre-inspections, RI/QP-related inspections, user acceptance testing, and final handover inspections for M&E systems.
• ​Assist in variation orders, claims review, payment certification support, defect tracking, rectification follow-up, warranties/guarantees collation, and DLP inspections.
• ​Maintain proper site records including drawings, specifications, change instructions, submissions, inspection records, and testing/commissioning documents.
• ​Provide technical guidance to the resident/site supervision team and coordinate closely with client, consultants, contractors, RI/QP, QS, and specialist vendors.
• ​Support Green Mark / energy management implementation, system performance monitoring, user training, and post-completion energy reporting where required.

Requirements:

Degree or Diploma in Mechanical, Electrical, Building Services, or related engineering discipline.

Minimum 7 years of relevant experience, including at least 2 years in site supervision or project management roles in developer, consultant, contractor, or resident technical/site supervision environments.

​Strong experience in A&A, fit-out, or building services works, including M&E coordination, contractor management, testing and commissioning, and handover.

Good understanding of local codes, authority processes, contract administration, and site execution practices in Singapore.

​Able to work predominantly night shift throughout the construction / A&A period, with flexibility to attend selected daytime meetings when required.

​Proven ability to manage design coordination, interfacing, technical clarifications, and administrative follow-up across multiple parties.

Roles & Responsibilities

• Work with MEMS Research & Development, ASIC design team & Packaging team to perform electrical failure analysis (EFA) and physical failure analysis (PFA) in root cause finding for product development & yield improvement.
• Perform IV/CV measurements on MEMS and ASIC components.
• To work closely with FA vendor to on product qualification, reliability monitoring failure, specific customer request, customer rejects and fab issue.
• Participate in cross-functional teams over different sites to provide analytical support.
• Develop test programs to support product characterization and testing and failure analysis.

Requirements

• Bachelor's Degree in Engineering in Electrical/Electronic, Physics or equivalent.
• Good understanding of FA techniques (such as FIB-SEM, EDX, SIMS, Obirch, XRF, FTIR, etc.).
• Able to perform IV/CV measurements with curve tracer.
• Knowledge in Excel VBA, Python, C++/C# programming will be an advantage.
• Strong troubleshooting and analytical skills.
• Possess strong written and verbal communication skills.

Location: Singapore (Onsite)

Duration: 12 Months Contract

• Possess a degree in Information Technology, Computer Science, Engineering, or a related field.

• 1 to 3 years of QA experience with exposure to ServiceNow testing.

• Strong understanding of ServiceNow modules (e.g. ITSM, ITOM, ITAM, HRSD,ITRM, Security Operations, Workplace Service Delivery, Strategic Portfolio Management etc.) and workflows.

• Strong experience in ServiceNow testing, including Automated Test Framework(ATF).

• Experience in managing end-to-end SIT and UAT cycles.

• Deep understanding of ServiceNow architecture, workflows, and module functionalities.

• Proven experience in test strategy development, test case design, and defect management.

• Hands-on experience with automation tools (e.g. Selenium, REST API testing tools, Postman).

• Strong analytical and problem-solving skills with attention to detail.

• Experience in integrating ServiceNow with other enterprise systems (e.g., SAP, Workday) will be advantageous.

• Experience with ServiceNow upgrades and patch testing will be a plus.

• Familiarity with Agile/Scrum methodologies and CI/CD pipelines will be a plus.

Principal Device Integration Engineer in Micron's Central Manufacturing Team responsible for enabling technology ramp in production and product yield & quality improvement by working collaboratively with Micron global network on CMOS and Memory device performance enhancement, variability reduction, design and test optimization, process simplification and working methodology improvement.
Job Responsibilities

• Enable technology ramp in high-volume production for CMOS and memory devices.

• Improve device performance with a focus on variability reduction and robustness.

• Support and execute design and test optimisation to enhance manufacturability and performance.

• Identify and implement process simplification and working methodology improvements.

• Lead or actively contribute to cross-functional problem-solving for device, yield, and quality issues.
   

Job Requirements

• Minimum 5 years of relevant working experience is required. A master's or Ph.D. degree in Physics or Engineering areas is preferred.

• Working experience in wafer fab process or process integration engineering. Direct experience in advanced CMOS device technology such as FinFET or GAA is preferable.

• Proven knowledge in semiconductor physics and understanding of transistor operations, scaling limitations and reliability, basic knowledge of CMOS circuits and characterisation methods.

• Understanding of wafer fabrication process areas, including tool sets, process mechanisms, tuning knobs, etc.

• Excellent data analysis skills using software (JMP, SPOTFIRE, etc).

• Strong task ownership, self-motivated to work with other team members to make progress collaboratively.

• Open-minded attitude to learn new skills and could adapt to a new working environment swiftly.

• Good digital literacy with MS Office. Programming capability such as Python is a plus.

• Occasional international business travel is required for this position.

Responsibilities:

• Providing technical expertise and oversight for the design, installation and maintenance of electrical systems and components
• Collaborating with project teams to develop and implement electrical engineering solutions that meet project requirements and safety standards
• Reviewing electrical drawings, specifications and work plans to identify and resolve issues
• Conducting site inspections and monitoring the work of electrical contractors to ensure quality and compliance
• Troubleshooting and resolving electrical faults and issues that arise during construction
• Preparing electrical reports, documentations and other project deliverables
• Staying up-to-date with changes in electrical engineering codes, regulations and industry best practices

Requirements:

• Degree in Mechanical or Electrical/Electronic Engineering or equivalent qualification
• Minimum 3 years' experience as an Mechanical or Electrical Engineer in the construction industry
• Strong technical knowledge of electrical systems, components and installation practices
• Familiarity with relevant electrical engineering codes, regulations and safety standards
• Excellent problem-solving and troubleshooting skills
• Strong communication and collaboration abilities to work effectively with project teams
• Proficiency in reading and interpreting electrical drawings and schematics
• Experience working on Building Projects

Please email your cv to sumitra@artemisessg.com

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions. We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 22S1050 | R1330228

DEVELOP AND TEST FIRMWARE

• SSD products: Develop firmware IP subsystems for SSD products that meet or exceed the requirements of the technical spec matrix; including, but not limited to: Performance, Endurance, Capacity, Functionality, and Quality/Reliability

• Firmware Quality Assurance: Develop a firmware unit and functional tests that ensures the firmware subsystem meets the quality, functional, and performance requirements required at each integration breakthrough in the product development lifecycle

COMMUNICATE EFFECTIVELY

• Dedicatedly provide management, multi-functional team members, and the firmware team with consistent, detailed, and accurate summaries of activities within firmware development.

DEVELOP PEOPLE

• Multi-functional Teamwork: Develop and maintain collaborative, open and, constructive relationships with peers and management

• Team Development: Provide technical capability that continuously boosts team involvement, morale, and efficiency

• Personal Development: Work to continuously improve your technical capability and communication skills

REQUIREMENTS

• Masters/Bachelors in Computer Engineering or Electrical Engineering

• Excellent communication skills.

• In-depth knowledge and minimum 2 years' experience in embedded firmware development and debugging

• Expertise in programming languages (eg. C, RUST), programming tools & environments

• Ability to work independently with a minimum of day-to-day supervision

• Experience with team leadership and/or supervising engineers and technicians

• Experience programming in Python will be viewed as an advantage

• Experience working with storage interfaces ideally PCIE/NVMe is considered a plus

• Experience with NAND flash and other non-volatile storage can be a plus

• Experience in storage industry, storage systems, or a related technology is an advantage

• Experience in conduct analysis, designs, performs programming, debugs, and modifies software

• Proficiency in resolving code problems for firmware applications
  

  Conducts analysis, designs, performs programming, debugs and modifies software. Troubleshoots code for firmware applications. Utilizes analog and digital hardware and software operating systems. Typically, programs in machine language, assembly language and high-level languages, (e.g., C, Python)

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

Job Description

Micron’s NAND Process Development (PD) Singapore group is looking for process development engineer to support TD activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Process module ownership involving Chemical Mechanical Planarization (CMP) process characterization and advanced process development for 3D NAND and beyond.

• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.

• Transfer CMP processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.

• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.

• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.

• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive multi-functional teams in implementation

• Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally.  Strict alignment to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’/Masters in Materials Science, Chemical Engineering or Physics with minimum 5 years hands-on experience in leading edge CMP polishing equipment such as AMAT or EBARA

• PhD in Materials Science, Chemical Engineering or Physics with minimum 3yrs hands-on experience in leading edge CMP polishing equipment such as AMAT or EBARA

• Lead and mentor CMP engineers early in their careers while driving technical excellence.

• Build, lead, grow a capable CMP team for NAND technology development.

• Master in CMP equipment operation, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads.

• Excellent problem-solving skills and critical decision making.

• In-depth understanding of polishing mechanisms for dielectric and metal CMP.

• Understanding of various integration and structural impacts and constraints related to film deposition processes.

• Understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Proven ability to collaborate with local and overseas teams on projects

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

PLC/ SCADA Associate Engineer 

5 days, 8.30am to 5.50pm

Salary: $3500 +/- depending on experience

Location: Bedok, travelling to site required 

Job scope:

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements:

• Nitec/ Diploma in Electrical/Electronic or related discipline
• 1-2 years of experience or some knowledge in PLC and SCADA
• Site maintenance and travelling around SG for site maintenance is required
• Class 3/3A driving license is required to drive company van