Total 4,306 Others/Any job vacancies

Salary: up to $2800

Working Days & Hours: Mon-Fri office hours

Location: Queenstown

Job Description:

• Check the suction and diathermy machines for cleanliness and good working order

• Check operating lights for clarity and good functioning

• Clean, check and prepare operating table and accessories

• Prepare the operating room for each patient scheduled on the operating list

• Assist in the safe transfer of patient from trolley to operating table and vice versa

• Assist in positioning the patient

• Assist surgeon in application of tourniquet

• Adjust and focus the operating lights and assist nurses in patient care

• Perform daily inventory check on positioning aids and accessories

• Perform cleaning of the operating room in between cases within 15mins

• Clear soiled linen and surgical wastes to the disposal room after the next case had started or when necessary time allows

• Ensure that the disposable suction liner is capped tightly before discarding into the biohazard bag

• Maintain proper housekeeping of OT suite which include operating room, prep-room, scrub room, Anaes room and sluice room daily

• Do terminal cleaning at the end of the list or after infected cases as stated in the protocol

• To stay in the operating room to assist the surgical team when needed, eg. Change the suction liner,

additional adhoc equipment needed etc

Secondary Responsibilities (20%):

• Maintain proper housekeeping of pantry

• Transport patient from the ward to OT and vice versa

• Perform routine cleaning of OT equipment e.g. tourniquet, light source etc weekly

• Perform any other duties as assigned

Job Requirements: Min Diploma in any course/HMI relevant course in healthcare support

Interested candidates, please submit your resume to: allylok@recruitexpress.com.sg

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

allylok@recruitexpress.com.sg

Outpatient Pharmacy - Office Hours
Inpatient Pharmacy - 3 Rotating Shift
Compound Pharmacy - Shift / Office Hours

Job Scope

• Assist pharmacists in dispensing medications accurately and efficiently
• Perform medication packing, labelling, and inventory management
• Ensure proper storage and handling of pharmaceutical products
• Assist in stock replenishment and inventory checks
• Support medication distribution to wards and clinics
• Maintain accurate documentation and comply with pharmacy regulations
• Ensure compliance with medication safety and infection control protocols

Requirements:

• Diploma in Pharmaceutical Science / Pharmacy Technician course or relevant qualification

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6589530688 

Email : kimlow@recruitexpress.com.sg

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Engineering Technician
Salary: $2000 - $2300 + $190 allowance +AWS + Bonus 
Working Days & Hours: Mon - Fri (8:15am - 5:15pm) 
Location: Chai Chee Ln (transport pick up from Bedok MRT)

Job Scope

• To build and trouble-shoot automated assembly machine.
• To sub-assemblies from Engineering drawings.
• Debug machines and processes for newly built machines.
• Perform machine alignments and final set-ups.
• Assist Engineer in carrying out new machine/equipment start-up. 
• Ensure all work meets quality and safety standards.

Requirements:

• Experience in the electronics or semiconductor industry is preferred.

Email: supreme.jacksontan@gmail.com

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Contract: 1 year (renewable/ convertible)

Location: Boon Lay

Salary Range: Up to $2600 + OT

Working time & days: Mon-Fri (0730hrs to 1715hrs)

• Automotive Industrial: Handing Heavy Army Artillery Guns

• Load: Heavy spares parts and components

Job Descriptions:

• Perform repair, maintenance, overhaul, service, replace, remove and installation task (Technical & Mechanical)

• Perform lubricant replacing, greasing and flushing of system (Hydraulic)

• Perform wiring replacing, tracking and diagnostic (Electrical)

• Machinery usage involved overhead crane, hydraulic press, drilling machine etc. special technical equipment.

• Working at height (climbing up and down of vehicles)

• Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

• Must be able to handle Heavy Army Artillery Guns

• At least 1-2 years working experience as Automotive/Supply technician

• Able to lift heavy spares parts and components

• Fast operating pace

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

• Investigate, troubleshoot and resolve IT-related issues involving operating systems, software, hardware, networks, printers and scanners.
• Assist in the setup, configuration, maintenance, and troubleshooting of office IT infrastructure including LAN, internet connectivity, routers, switches, wireless access points and NAS system.
• Install, configure, and maintain end-user equipment such as desktops, laptops, monitors and peripherals.
• Assist HR with IT onboarding and offboarding, including granting system access, conducting induction for new hires, and preparing devices.
• Ensure IT security and data privacy practices are followed, including antivirus updates, access controls, and basic security checks.
• Liaise with external IT vendors and service providers for issue escalation, maintenance, and IT-related projects.
• Maintain accurate IT asset tracking, including hardware inventory, software licenses, and equipment lifecycle records.
• Document IT procedures, system configurations, troubleshooting steps, and infrastructure changes.
• Assist the team with ad-hoc IT tasks, projects, and improvements as required.

Key Responsibilities

1. Application & System Support (Primary Focus)

• Act as the main point of contact for all in-house application issues and user support.

• Troubleshoot, perform root cause analysis, and resolve system/application issues; escalate when required.

• Monitor system performance and ensure applications run smoothly and reliably.

• Manage and track support tickets, ensuring timely resolution based on SLAs.

• Support application deployments, patches, and upgrades.
  

2. Requirements & Testing

• Work with users to gather and document business and system requirements.

• Translate requirements into clear specifications for developers.

• Perform testing (UAT, functional, integration) to ensure system quality.

• Log and track bugs, ensuring proper resolution before deployment.
  

3. IT Infrastructure & User Support

• Provide day-to-day IT support (hardware, software, network issues).

• Set up and maintain IT equipment, systems, and user accounts.

• Support onboarding/offboarding (accounts, devices, access).

• Maintain IT asset inventory and documentation.
  

4. Documentation & Training

• Create and maintain user guides and system documentation.

• Conduct basic training for users on applications and systems.
  
  

Requirements

• Diploma in IT or related field.

• 1–2 years of experience in IT or application support.

• Strong troubleshooting and problem-solving skills.

• Experience in application support, testing, and documentation.

• Familiar with Windows, basic networking, and IT systems.

• Good communication skills; able to support non-technical users.

• Bilingual in English and Mandarin (to liaise with regional stakeholders).

• Able to manage multiple tasks independently.
  

Note: The IT Executive will be required to travel to our multiple project sites (islandwide), as and when necessary.

About SKtes

SKtes is a global leader in secure and sustainable technology lifecycle management services. From secure IT asset disposition to advanced materials recovery, our approach is built on a simple principle: extending the value of resources while minimising environmental impact.

Our long-standing commitment to responsible recycling has delivered meaningful impact—supporting circularity, reducing landfill waste, and enabling organisations to meet both sustainability and data security goals. We believe that responsible recycling today is critical to sustaining tomorrow.

Job Summary

We are seeking a proactive and hands-on IT Infrastructure & Support Engineer to support and maintain our organization’s IT systems and infrastructure. The successful candidate will play a key role in ensuring the reliability, security, and efficiency of our IT environment while providing technical support to users.

Job Responsibilities

• Manage user accounts, access rights, and device provisioning

• Administer and maintain servers, storage systems, network equipment, and cloud services

• Support Microsoft 365, collaboration platforms, and business applications

• Provide technical support for hardware, software, and network-related issues

• Manage LAN/WAN, VPN, firewalls, wireless networks, and internet connectivity

• Support vulnerability management, patch management, and endpoint security initiatives

• Investigate and respond to IT and security incidents

• Maintain IT asset inventory and manage software licensing

• Coordinate with external vendors and service providers

• Raise Purchase Orders (POs) for IT hardware, software licenses, subscriptions, and services in accordance with company procurement policies
  

Job Requirements

• Bachelor’s Degree or Diploma in Computer Science, Information Systems, or a related field

• At least 3 years of experience in IT infrastructure and support

• Solid working knowledge of:

  • IT support and troubleshooting

  • Networking and Windows Domain environments

  • Microsoft 365 administration

  • AWS cloud technologies

  • Network and information security practices

• Strong teamwork and communication skills

• Proactive, resourceful, and committed to continuous learning

What do we have to offer? 

Our IT Team presents phenomenal opportunity for a highly motivated and results-oriented individual. Join us in the adventure to explore innovative technologies to run state of art, operationally efficient and secure datacenters.

Looking to advance your career?

Micron is the place for you to expand your caliber by working on major projects, developing the leader in you! We provide online learning opportunities and on-the-job training to upgrade your skills. 

What’s more? We provide peer mentorship to guide you through the process of learning new systems. 

A DAY OF WORK WOULD INCLUDE THE FOLLOWING:

• Involving in the application lifecycle management for software systems in a highly automated semiconductor manufacturing environment.

• Working with partners to conduct user requirement analysis and collaborate with global IT team to implement and deliver IT solutions for Manufacturing operations.

• Planning and leading user training and acceptance testing/verification for new software to ensure a good quality software release to production.

• Performing applications software and hardware maintenance to ensure high uptime

• Supervising system performance actively to identify abnormalities and develop capabilities to prevent unscheduled downtime.

JOB REQUIREMENTS:

• Possess a Bachelor’s Degree in Electrical & Electronics/Computer Engineering, Computer Science or equivalent experience.

• Knowledge in any programming language such as C#/C++ programming, Java, Perl, HTML5 and SQL.

• Creative and have passion in implementing innovative IT solutions to tackle meaningful business problems.

• Good interpersonal and communication skills. Willing to work in a clean room work environment and dynamic team environment to achieve a common goal through effective collaboration and dedication.

• Able to provide 24/7 standby operation support.

• Able to travel when required.

• Applicant who have proven good software project management skill and had exposure to agile development methodology will be advantageous.

Job Description

• Act as the first point of contact for local system and application issues; perform initial analysis, troubleshooting, and issue resolution.

• Escalate unresolved issues to the Taiwan IT team and coordinate follow-up actions as needed.

• Develop, enhance, and maintain local reporting systems based on business and operational requirements.

• Gather, clarify, and confirm system and reporting requirements from local users.

• Perform basic system testing and validation to ensure solution quality before release.

• Assist in preparing simple system documentation or user guidance when required.

• Perform other duties as assigned by supervisors.

Job Requirements

• Minimum 5 years of relevant working experience in system development, application support, or related roles.

• Possess a Diploma, Bachelor’s Degree, or Master’s Degree in Computer Science, Information Systems, Information Management, or related disciplines.

• Good command of written and spoken English.

• Proficiency in spoken and written Chinese to support communication with Taiwan and regional stakeholders.

Skillsets Required

• Server and website administration and maintenance.

• IT infrastructure and equipment environment setup.

• Installation and maintenance of network security systems.

• Network system configuration.

• Computer hardware maintenance.

• Basic operating system operations.

• Network equipment installation and configuration.

• Firewall planning and management (Added advantage)

• System architecture planning and maintenance (Added advantage)

Other Requirements

• Minimum 5 years of experience in computer hardware and network maintenance.

• Ability to plan IT and network infrastructure and troubleshoot network issues.

• Familiar with operating systems, including Windows Server and Linux/Unix. (Experience in Linux/Unix is preferred)

• Familiar with TCP/IP protocols, subnetting, and IP Address management.

Responsibilities including but not limited to:

• Conduct general servicing for aircon systems
• Conduct chemical overhaul for aircon systems
• Diagnose,troubleshoot and repair aircon systems
• Propose and upsell aircon services to customers
• Perform site surveys and advise customers on installation details
• Daily reporting and weekly reporting to direct manager
• Any other tasks, when required by the immediate supervisor

Requirements:

• Customer facing, friendly and patient personality
• Must be able to handle physical work due to job nature
• Able to use simple mobile technology
• Open to learning
• Have handman work experience
• Effective handling of fault / emergency repairs and customer complaints
• Possess Class 3 License would be an added advantage

ALG is currently hiring QA Technicians for our client based in Singapore. Our client is known for designing, manufacturing, and servicing systems and components for the aerospace and defense industries.

Roles and Responsibilities

• Perform incoming quality control (QC) inspections and testing, and maintain proper records.
• Manage vendor documentation, including checklists, test data, and mill certificates.
• Organise and maintain engineering drawings and incoming QC documents.
• Maintain and calibrate instruments and equipment as per schedule.
• Support the QA Engineer in quality evaluations and data analysis.
• Provide quality-related information to assist in decision-making.
• Report any gauges, fixtures, or measuring tools that are out of calibration, damaged, worn-out, or missing.
• Assist other departments with special measurement or product/component testing when delegated.
• Undertake other duties as assigned by the QA Engineer or QA Manager.

Job Requirements

• NITEC /Higher NITEC in Precision Engineering or equivalent
• At least 2 years working experience in aerospace industry

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23115729

About the role

Pest Control Technician conducting pest control operations at residential, commercial, and industrial sites in Singapore.

Key responsibilities

• Conduct pest control operations at residential, commercial, and industrial sites

• Safely handle equipment and chemicals according to NEA guidelines

• Provide professional service and maintain good customer relations

• Report findings and complete service documentation

Requirements

• Must hold a valid Singapore Class 3 Driver's License

• NEA Pest Control Worker/Technician's License preferred but not required

• Singaporean

• Able to perform manual tasks and willing to work 5.5-day week

• Team player with a strong sense of responsibility

• No prior job experience needed

Benefits

• Progressive increase in salary after probation period

• Productivity bonus/incentives available

• Guaranteed long-term service bonus after every 5 years of employment

• All-rounded skills training provided

• Career progression opportunities

• Supportive team environment

Job scope:

• Performing Installation & modification of electrical, electromechanical and electronic parts of forklifts
• Troubleshooting electrical systems & wiring of electrical panels
• Understanding schematic diagram

Requirements:

• ITE/Diploma in any engineering related field
• Experience in hands on technical roles and able to read schematic diagram

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Select, use, and maintain service tools correctly to perform assigned tasks efficiently and safely.
• Install electrical components, including switches, sensors, transducers, transmitters, current transformers, alternator components, and control panels.
• Perform engine wiring installation in accordance with engineering drawings and specifications.
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, and related parts.
• Carry out engine valve lash adjustments to ensure optimal engine performance.
• Assist in and perform mechanical installation works, including radiator assemblies, couplings, engines, alternators, gearboxes, piping systems, and hoses.
• Assist in and perform alignment works for radiator assemblies, engines, and alternator installations.
• Prepare generator sets for load testing activities.
• Conduct safety device testing and load testing, including recording and documenting all required operational parameters and test results.
• Connect and utilize Electronic Technician (ET) diagnostic tools to retrieve engine diagnostic codes, event logs, and operational data.
• Perform troubleshooting and fault diagnosis on engines and generators, identifying root causes and implementing corrective actions.
• Ensure all work is carried out in compliance with safety regulations, quality standards, and company procedures.

Requirements

• Possess an ITE or equivalent.
• Minimum 5 years of relevant hands-on experience.
• Electrical hands-on experience is a must.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel: 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The Instrument Technician is responsible for ensuring that all surgical supplies, instruments and equipment are properly inventoried, decontaminated, assembled, inspected, package, sterilized, stored, distributed and tracked in a quality / timely manner throughout the hospital.

Requirements

• Minimum GCE N Level equivalent
• Certificate in Healthcare Service is preferred
• Has good interpersonal and communication skills

Only shortlisted candidates will be notified

Visual Inspection & Packaging Technician

Location: 2 Tuas View Drive, Singapore 639059

Reports to: Senior Manager, DP Operation

Job Summary

We are seeking an experienced Pharmaceutical Visual Inspection & Packaging Technician with 5–10 years of hands-on experience in a pharmaceutical manufacturing environment. The ideal candidate will be responsible for performing manual and automated visual inspection of pharmaceutical products, operating and supporting packaging lines, and ensuring compliance with GMP and safety standards. Experience with automated visual inspection systems and familiarity with manual labelling and packaging and automatic packaging equipment, especially MG (Marchesini Group) or similar lines, will be considered a strong advantage.

Responsibilities:

Visual Inspection & Packaging

• Perform manual visual inspection of vials, syringes, or other primary packaging for defects such as particles, cracks, discoloration, and fill volume issues.

• Operate automated visual inspection machines and monitor performance to ensure product quality.

• Document inspection results and report any deviations or quality issues in accordance with SOPs.

• Operate and monitor automatic packaging line.

• Assist in packaging line setup, CQV activities and changeovers to ensure efficient production runs.

• Support in manual labelling and packaging of products if required.

• Experience with Marchesini Group( MG) packaging lines is highly preferred.

• Production Support & Compliance:

• Perform daily cleaning and clearance of work areas and equipment to maintain GMP compliance.

• Handle material dispensing, stockkeeping, and reconciliation for visual inspection and packaging processes.

• Support troubleshooting of equipment failures and collaborate with maintenance/engineering teams for repairs and preventive maintenance.

• Complete batch records, logbooks, and inspection reports accurately and in a timely manner.

• Participate in quality investigations, root cause analysis, and corrective actions as needed.

• Follow safety, environmental, and regulatory guidelines at all times.

• Train new team members on visual inspection techniques, equipment operation, and GMP requirements.

• Any other duties as and when assigned by the Manager or supervisor.

Compliance & Continuous Improvement

• Strictly adhere to SOPs and EHS protocols (cleanroom gowning, sanitization procedures)

• Support the revise of relevant operating procedures and related files in accordance with GMP requirements

Qualifications:

• 5-10 years of relevant experiences in visual inspection and packaging.

• Diploma or higher in Pharmaceutical Manufacturing, Pharmaceutical Engineering, Pharmacy, Bioengineering, Biotechnology, Chemical Engineering, Microbiology, or related fields.

• Strong English language skills and the ability to proactively analyze and solve problems that arise in the workplace.

• Good communication and expression skills.

• Effective team collaboration, efficient execution, and a strong sense of responsibility.

• Flexibility to work on day, afternoon, or night shifts, and on weekends as part of shift rotations, depending on production scheduling needs.

Training Opportunities:

• Production Skills Training: Helps you quickly meet the technical qualification requirements for your current position.

• GMP Hands-on Training: Media fill qualification, Grade A isolator behaviour

• Equipment Usage Skills Training: Familiarize yourself with the facilities and equipment involved in DP.

• Safety Awareness and Professional Training: The company offers a comprehensive system of safety training materials and experienced instructors.

• Demonstrates and promotes the company vision
• Regular attendance and punctuality
• Applies GMP/GLP in all areas of responsibility, as appropriate.
• Performs any combination of sample preparation tasks to ensure sample homogeneity which includes but is not limited to labeling, transferring, liquid nitrogen use, milling, blending, weighing, disposal of samples, etc.
• Communicates sample information effectively.
• Communicates discrepancies to appropriate personnel, and assists with problem solving.
• Handles internal customer inquiries and requests.
• Works with the customer service coordinators to resolve client or sample issues.
• Introduces and develops improvement ideas for the group with the assistance of others.
• Learns sample preparation procedures involving larger equipment.
• Learns how to perform equipment maintenance/basic repairs and place work orders.
• Introduction to cross-training between food and dietary supplement prep procedures.
• Conducts all activities in a safe and efficient manner
• Performs other duties as assigned

To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements below are representative of the knowledge, skill or ability required.

• High School diploma or equivalent.
• Working knowledge of computers.
• 2+ years’ experience in a position with high attention to detail.
• Customer service skills including attention to detail, accuracy, confidentiality and effective communication skills.
• Ability to identify and communicate customer service needs.
• Conflict resolution skills.
• Good documentation skills.
• Ability to learn new tasks
• Ability to think critically and solve problems quickly and efficiently

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Manufacturing Technician (Chemical) to be part of their team for ongoing transformation projects. They are located in the West.

The Manufacturing Technician (Chemical) will be responsible for:

Supporting chemical manufacturing operations by carrying out production activities in accordance with established work instructions, quality requirements, and safety standards to ensure efficient and reliable plant operations.

• Operate and perform various stages of chemical manufacturing processes in accordance with work instructions and established safety procedures.
• Carry out forklift and stacker operations, where required, to support production and material handling activities.
• Assist the Production Supervisor in troubleshooting process and product quality issues to ensure smooth manufacturing operations.
• Perform batch processing activities in a production environment that includes both automated systems and manual operations.
• Participate in training and, where required, support the company's Emergency Response Team (ERT) in accordance with operational and safety requirements.
• Maintain compliance with company quality, safety, health, and environmental policies and procedures.

Job Requirements:

• NITEC, Higher NITEC, Diploma, or an equivalent qualification in Chemical Process Technology, Mechanical Engineering, or a related discipline.
• Relevant experience in a chemical plant or manufacturing environment is preferred.
• Knowledge of or experience with Distributed Control Systems (DCS) and/or Programmable Logic Controllers (PLC) is an advantage.
• Possession of a valid forklift driving licence is an advantage.
• Willingness to work in a manufacturing environment and follow established safety procedures.
• Ability to work independently and collaboratively within a team.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

SIA Engineering Company (SIAEC) is Asia’s foremost Maintenance, Repair and Overhaul (MRO) provider. With certifications from more than 20 airworthiness authorities, SIAEC’s global MRO network, including six hangars in Singapore and three hangars in Philippines, delivers turn-key integrated solutions to a large client base of international airlines and aerospace companies.

2023 & 2022 “Singapore’s Best Employers” by The Straits Times and Statista

2022 “Asia MRO of the year – Airframe” by Aviation Week Network

2022 & 2021 “Asia-Pacific MRO of the Year” by Airline Economics magazine

Responsibilities:

• Performs aircraft sheet metal layout and template.
• Repair and modifies aircraft structural parts and repairs composite materials.
• Manufacture and repair non-in stock structural parts.
• Performs metal forming operation.
• Be able to interpret basic drawings and blueprint.
• Identify aircraft major and minor defects and prepared type of repair required.
• Fabricates related sheet metal and assemblies.
• Performs and replace plastic aircraft enclosure.

Requirements:

• Minimum 2 years of relevant experience in structural repair for aircraft
• Relevant educational qualifications in Engineering field
• Willing to work in Singapore
• Ability to converse and write in English

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Our client is global MNC, manufacturer of ventilation systems. Due to business needs, they are now recruiting a Field Application Technician to be part of their Field Service Team for ongoing transformation projects. They are located in the East Area - easily accessible.

Duties of Field Application Technician:

• Deliver technical assistance to contractors and clients through phone support and various communication platforms, resolving product or system-related enquiries effectively.
• Perform on-site inspections and measurements to evaluate and enhance system efficiency and performance.
• Liaise closely with customers and cross-functional teams to provide site assistance and resolve technical issues when necessary.
• Prepare and maintain service reports, technical documentation, training materials, and knowledge-sharing resources.
• Support additional tasks and projects assigned by management, while adapting to operational requirements.
• Uphold workplace safety standards by actively participating in risk assessment, hazard identification, and safety improvement initiatives.

Requirements:

• ITE or Diploma in Engineering field
• Min 1 year of field application experience in ACMV industry
• Possess Class 3 Driving License is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

Primary Functions & Responsibilities:

• Inspect machines, parts, and products to ensure compliance with required standards and specifications.

• Maintain the quality of machines, parts, and products throughout the production process.

• Ensure all inspection check sheets and quality records are accurately completed and properly maintained.

• Ensure that non-conforming machines, parts, or products are not released to customers.

• Follow up on quality-related matters and ensure defects are corrected prior to production release or shipment.

• Ensure corrective and preventive actions are effectively implemented and sustained.

• Comply with QEHS (Quality, Environment, Health & Safety) procedures and company policies.

• Perform any other duties and responsibilities as assigned by the supervisor.

• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• NITEC/Higher NITEC in Mechanical/Mechatronics/Precision Engineering, or a related field.

• Minimum 1 year of experience in quality control or related work.

• Preferably with at least 1 year of experience in machine operation.

• High level of integrity and accountability.

• Meticulous, detail-oriented, and quality-focused.

• Good team player with strong communication skills.

Job Responsibilities including but not limited to:

• Install, repair, and maintain refrigeration systems, including refrigerators, and some others prism products.
• Diagnose and troubleshoot system issues, including mechanical, electrical, and refrigerantrelated problems.
• Repair or replace faulty components, such as compressors, condensers, evaporators, motors, and fans.
• Perform regular preventive maintenance on refrigeration systems to ensure optimal performance and prevent breakdowns.
• Conduct system tests to verify performance, temperature control, and refrigerant levels.
• Calibrate temperature controls, thermostats, and pressure switches as needed.
• Follow safety protocols and guidelines to ensure a safe working environment.
• Adhere to relevant regulations, codes, and industry standards for handling refrigerants and electrical systems.
• Maintain accurate records of repairs, maintenance activities, and parts inventory.
• Provide excellent customer service by addressing client inquiries and resolving issues promptly.
• Stay updated with advancements in refrigeration technology, industry trends, and best practices.
• Collaborate with team members and contractors to complete projects and assignments.
• Any other ad-hoc duties as assigned by superior/or managery.

Requirements:

• Min O-Level or equivalent. Relevant certifications or vocational training is a plus.
• Min 2 years’ experience as a Refrigeration Technician or similar role.
• Strong knowledge of refrigeration systems and components.
• Familiarity with electrical systems and troubleshooting techniques.
• Ability to read and interpret technical manuals and diagrams.
• Excellent problem-solving and analytical skills.
• Detail-oriented with a strong commitment to quality and safety.
• Excellent communication and customer service skills.
• Ability to work independently and under pressure.
• Possess Class 3 License would be an added advantage

Our esteemed client in the Chemical Manufacturing industry is seeking a QC Technician to join their dynamic team:

• Employment Type: Permanent
• Position: QC Technician
• Location: West (Transport provided from designated pickup point)
• Working Hours: Monday to Friday, 8am to 5.15pm during the first3 months; thereafter, the schedule will change to a 12-hour MORNING shift from 8am to 8.30pm
• Salary Package: Up to $2,900 + AWS + Bonus

Job Responsibilities:

• Conduct daily Quality Control (QC) testing for raw materials, in-process manufacturing, and recurring inspections.
• Assist in root cause analysis for product complaints and production rejects, review records, and conduct stability studies.
• Support supervisors in meeting Quality Assurance (QA) targets, such as First-Time Right (FTR) and performance indices.
• Assist in upholding ISO 9001 standards, managing documentation, conducting internal audits, and ensuring good laboratory practices.

Job Requirements:

• Minimum a Nitec in a Chemical-related discipline.
• Prior QC experience within a chemical manufacturing environment is highly preferred.
• Possess prior experience in operating lab equipment such as Gas Chromatographs, Differential Scanning Calorimeters, Autotitrators, and Karl Fischer Titrators.
• Comfortable working on a 12-hour rotating shift schedule.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793