Total 15,456 Others/Any job vacancies

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in Chemical/ Environmental/ Mechanical Engineering
• Minimum 4 years of experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

Duration: Yearly Renewable Contract (Convertible)

Working Location: AMK

Working Hours: Monday to Friday (830am – 6pm)

Salary range: Up to $6500 (Based on experience)

Job Responsibilities:

• Design, configure, deploy, and maintain application systems and related infrastructure

• Analyze business requirements and translate them into technical solutions

• Provide Level 2/Level 3 support for application incidents, troubleshooting, and root cause analysis

• Monitor system performance, availability, and reliability; implement optimizations as needed

• Collaborate with software developers, vendors, and cross-functional teams for system integration and enhancements

• Manage application releases, patches, upgrades, and configuration changes

• Ensure system security, compliance, and data integrity standards are maintained

• Develop and maintain technical documentation, system diagrams, and operating procedures

• Automate routine processes and workflows to improve efficiency

• Participate in system testing, including SIT/UAT, and support deployment activities

• Continuously evaluate emerging technologies to recommend improvements

Job Requirements:

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field

• Minimum 3 years of experience in application systems engineering, application support, or similar roles

• Strong understanding of application architecture, system integration, and API frameworks

• Hands-on experience with application servers such as Apache Tomcat, Oracle WebLogic Server, and Microsoft IIS

• Proficiency in scripting or programming languages such as Python, PowerShell, Java, or Shell scripting

• Solid experience working with databases such as Microsoft SQL Server, Oracle Database, and MySQL, including writing complex queries

• Familiarity with cloud platforms such as Microsoft Azure, Amazon Web Services, or Google Cloud Platform

• Experience with DevOps practices and tools, including CI/CD pipelines, version control (e.g., Git), and automation tools such as Jenkins

• Knowledge of ITIL processes, including incident, change, and problem management

• Exposure to modern technologies such as containerization (Docker, Kubernetes) and microservices architecture is an advantage

• Familiarity with system monitoring and observability tools such as Splunk, Prometheus, and Dynatrace

• Relevant certifications in cloud platforms, ITIL, or related technologies are preferred

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

EA License No: 90C3494 | EA Personnel No: R25157619 | EA Personnel Name: Kauthamen Appu

Duration: Yearly Renewable Contract (Convertible)

Working Location: AMK

Working Hours: Monday to Friday (830am – 6pm)

Salary range: Up to $6500 (Based on experience)

Job Responsibilities:

• Design, deploy, and maintain network infrastructure including LAN, WAN, WLAN, and data center networks

• Configure and manage network devices such as routers, switches, firewalls, and load balancers

• Monitor network performance, availability, and capacity; proactively identify and resolve issues

• Perform Level 2/Level 3 troubleshooting for network incidents and outages

• Implement network security measures including firewalls, VPNs, intrusion detection/prevention systems

• Support network architecture planning and scalability for future business needs

• Manage network upgrades, patches, and firmware updates

• Work with vendors and service providers to resolve issues and optimize services

• Maintain documentation including network diagrams, configurations, and SOPs

• Ensure compliance with security policies, standards, and regulatory requirements

• Support disaster recovery and business continuity planning for network systems

• Participate in on-call rotation and after-hours support when required

Job Requirements:

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field

• Minimum 3 years of experience in network engineering, infrastructure, or related roles

• Relevant industry certifications such as CCNA, CCNP, JNCIA/JNCIS, or equivalent are preferred

• Strong understanding of core networking concepts, including TCP/IP, DNS, DHCP, VLANs, and routing protocols such as OSPF and BGP

• Hands-on experience with enterprise network devices and technologies from vendors such as Cisco, Juniper Networks, Fortinet, and Aruba Networks

• Proven experience in configuring and managing firewalls, VPNs, and implementing network security best practices

• Familiarity with network monitoring and performance tools such as SolarWinds, PRTG Network Monitor, Nagios, and Zabbix

• Experience with wireless networking technologies (WLAN, Wi-Fi standards) and troubleshooting

• Exposure to cloud networking concepts on platforms such as Amazon Web Services, Microsoft Azure, or Google Cloud Platform

• Basic scripting or automation skills (e.g., Python, PowerShell) and familiarity with Infrastructure-as-Code (IaC) tools such as Terraform or Ansible will be an advantage

• Experience with modern networking technologies such as SD-WAN, network virtualization, and Zero Trust architecture is a plus

• Knowledge of data center networking, high availability design, and system resilience

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R25157619 | EA Personnel Name: Kauthamen Appu

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Process Intelligence Engineer is responsible for designing, building, and maintaining Industrial & Systems Engineering data modeling and analytics solutions that support data‑driven decision‑making across logistics, supply chain, and manufacturing operations.

The role works closely with engineering and operations stakeholders to translate business questions into scalable reporting, analytical models, and actionable insights, supporting operational visibility, execution tracking, and continuous improvement across domain‑focused initiatives.

Key Responsibilities

Decision Intelligence & Analytics

• Work in cross‑functional teams to design and develop reporting solutions enabling data‑driven decisions for logistics, supply chain, and manufacturing teams.

• Partners with GIS, Engineering, and Operations teams to align process analytics initiatives with broader analytics and automation efforts.

• Develop and maintain dashboards, analytical data models, and KPI frameworks using Power BI, Tableau, or equivalent BI platforms.

• Build scalable ETL data pipelines for ingestion, cleansing, integration, and transformation of large datasets across SAP, Databricks, SQL data warehouses, and operational systems.

• Perform ad‑hoc statistical, diagnostic, and root‑cause analysis using SQL and Python to support business investigations.

• Interface with internal customers for requirements gathering; translate business problems into reporting specifications and analytical outputs.

• Create automated workflows to ensure timely refresh and reliability of datasets, dashboards, and scorecards.

• Generate reports, technical documentation, business presentations, and stakeholder communications for operations and leadership.

• Continuously evaluate visualization, and reporting technologies; recommend improvements for reporting efficiency, data quality, and automation.

• Provide guidance to team members on best data and process practices, visualization standards, metric definitions, and structured problem‑solving approaches.

• Enable descriptive to predictive modeling and predictive to prescriptive modeling using standard datasets to optimize warehousing.
  

Simulation & Decision Modeling Skills

• Applies statistical and scenario‑based simulation techniques to evaluate business outcomes, operational tradeoffs, and decision alternatives.

• Uses what‑if analysis, Monte Carlo simulation, sensitivity analysis, and probabilistic modeling to assess risk, variability, and performance impacts across key metrics.

• Supports capacity, demand, throughput, and service‑level analysis using historical data and modeled assumptions rather than detailed process‑engineering tools.

• Partners with engineering, operations, and analytics teams to frame simulation inputs, assumptions, and constraints aligned with real‑world execution.

• Communicates simulation results clearly through dashboards, visualizations, and narratives to support leadership decision‑making.

• Leverages Python, SQL, and analytical tooling to build lightweight, repeatable simulation models that integrate with BI datasets and reporting workflows.
  

Education & Experience

• Education: Bachelor’s degree required; Master’s preferred in Industrial & Systems Engineering, Computer Science, Business Analytics, Systems Engineering or a related field.

• Experience: 4–7 years of experience in process intelligence, analytics, dashboarding, or data‑engineering–adjacent environments.
  

Preferred Skills

• Strong proficiency in SQL and Python for analytics and problem‑solving.

• Expertise in Power BI, Tableau, or equivalent visualization tools.

• Experience with cloud and big‑data platforms (Azure, Databricks, Snowflake, AWS, GCP).

• Knowledge of ETL/ELT frameworks, data modeling techniques (star/snowflake schemas), and DAX or similar analytical expressions.

• Understanding Data automation, data refresh pipelines, and reporting governance.

• Strong communication, stakeholder management, and collaboration skills.

• Curious, analytical mindset with interest in operational analytics and continuous improvement.

Lead Repair Development Engineer, Joining Technology

Salary: Up to $8,500/month + AWS + Variable Bonus
Benefits: Transport Provided
Location: Pioneer

Key Responsibilities

• Lead the development and industrialization of advanced joining and repair technologies to support manufacturing and repair operations globally.
• Design and implement innovative repair solutions to support new product introductions and component repair strategies.
• Develop validation plans for repair materials and laser cladding technologies in collaboration with New Repair Introduction teams.
• Drive successful technology transfer and qualification of repair service centers, ensuring compliance with repair standards and certifications.
• Execute engineering projects involving process design, analysis, evaluation, and continuous improvement initiatives.
• Provide technical expertise in joining technologies, including welding, brazing, laser cladding, and related metallurgical processes.
• Monitor project progress, communicate key developments, and ensure timely delivery of objectives.
• Maintain high-quality technical documentation in accordance with engineering and business requirements.
• Identify and implement productivity and process improvement opportunities across the global repair network.
• Collaborate closely with component engineering, manufacturing, supply chain, and global stakeholders to deliver impactful solutions.

What We're Looking For

• Bachelor's Degree in Welding, Materials, Manufacturing, Mechanical Engineering, or a related engineering discipline.
• 8 years of manufacturing experience, including at least 5 years specializing in joining technologies.
• Knowledge of industrial gas turbine components and repair technologies.
• Exposure to thermal spray coatings, surface finishing, machining, sealing, and related repair processes.
• Strong expertise in:
• Laser cladding processes
• Superalloy welding and brazing metallurgy
• Numerically Controlled (NC/CNC) machinery
• Solid understanding of manufacturing and repair processes within industrial environments.
• Familiarity with Lean Manufacturing principles and continuous improvement methodologies.

If you're passionate about advanced manufacturing, materials engineering, and developing world-class repair technologies, we'd love to hear from you.

• Up to $7,500 Basic + Bonus + benefits!
• Permanent position/ 5 work days
• Participating in the MRT Tunnel project at West area.
• Having experience in the reinforced concrete and construction of local MRT Tunnel projects is preferred.

Our clients are reputable MNCs and leading A1 Construction diverse in infrastructure projects, civil work, commercial projects

Job Responsibilities:

Supervise RC structural works on site

• Supervise rebar fixing and formwork installation
• Inspect before concrete pouring
• Coordinate with subcontractors
• Review structural drawings
• Ensure alignment and structural tolerances
• Monitor productivity and sequencing
• Handle consultant inspections
• Resolve site technical issues

Requirements:
• Minimum Degree holder in Civil Engineering
• Having experience in RC work in MRT project is preferred.
Other Information:
To apply please click on the APPLY NOW button or email your resume to search84@searchindex.com.sg with the following details inside your resume
• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date
We regret only shortlisted candidates will be notified.
Lionel Cheow
EA License | 14C7092
EA Registration Number | R1105005

• Contract: 1 year renewable/ convertible

• Location – Ang Mo Kio + project sites

• Salary Range – $3000 to $3500

• Working Days & Time: Mon to Fri (8.30am to 6pm)

Job Descriptions:

• Perform maintenance, troubleshooting, preventive servicing, installation, upgrading, and technical support works for the Card Access System

• Carry out troubleshooting, fault diagnosis, and rectification of system issues, including the replacement of defective hardware components and devices where necessary

• Perform scheduled preventive maintenance (PM) works to ensure the system operates efficiently and reliably.

• Attend to breakdowns, service calls, and technical issues promptly to minimize system downtime and ensure continuous operation of the Card Access System

• Perform additional installation, upgrading, testing, and commissioning works for Additions & Alterations (A&A) projects as and when required

• Assist in system configuration, basic programming, and verification testing to ensure proper integration and functionality of newly installed or replaced equipment

• Maintain proper service documentation, maintenance records, and reports for all maintenance and installation activities carried out

• Observe and comply with all workplace safety requirements, operational procedures, and company guidelines while carrying out duties on-site

Job Requirements:

• NITEC / Higher NITEC / Diploma in Electrical, Electronics or related disciplines

• Candidates without experience are welcome to apply as training will be provided

• Basic knowledge of electrical or electronic systems will be an advantage

• Hands-on, willing to learn, and able to work independently as well as in a team environment

• Able to travel to customer sites for maintenance and installation works

• Willing to perform overtime and standby duties when required

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R25157619 | EA Personnel Name: Kauthamen Appu

Summary Benefit :

• LTA / MRT Project
• Basic + Allowance + OT + Bonus
• Location : West
• On job training provided

Responsibility :

• Oversee all M&E construction activities on site and report directly to the Project Manager.
• Manage construction progress and site operations independently.
• Interpret and understand M&E drawings, specifications, and project requirements.
• Attend project kick-off meetings, project team meetings, and provide regular updates on work progress.

Tender

• Carry out engineering tasks including design, engineering calculations, planning, and tender preparation/evaluation as part of the project engineering team.
• Prepare and maintain QA/QC documentation for all engineering deliverables.
• Liaise with clients, project managers, architects, and contractors to support project coordination.
• Assist in resolving technical issues encountered during the design and/or construction phases of the project.

Requirement :

• Min Diploma / Degree in Mechanical/ Electrical Engineering discipline or equivalent
• Candidate with relevant experience welcome to apply

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Up to Basic $8k + AWS + Variable Bonus!
• Permanent position/ Participate in MRT Tunnel project in the Tampines area.
• Experience in MRT Tunnel projects is mandatory. 
• Qualification degree recognised by the Singapore Professional Engineers Board [PEB] is mandatory.

Our client is a reputable MNC and leading A1 main contractor diverse in civil and infrastructure project.

Job Summary

We are seeking an experienced Senior Civil & Structural Engineer to support an MRT tunnel project. The role will oversee site supervision, technical coordination, construction planning, quality control, and compliance with client, authority, safety, and project requirements.

Key Responsibilities

• Review design drawings, specifications, and construction documents.
• Supervise and monitor C&S site works to ensure quality, safety, and compliance.
• Coordinate construction activities and resolve site conflicts across disciplines.
• Assist with construction sequencing, method statements, planning, and temporary works.
• Conduct site inspections, quality checks, audits, and progress reporting.
• Provide technical input during project meetings and support site problem-solving.
• Guide junior engineers and site staff.
• Support cost control through review of material usage, workmanship, and variation claims.

Requirements

• Degree in Civil Engineering or related field. Degree should be recognised by the PE Board.
• Minimum 8 years’ engineering experience.
• Experience in MRT Tunnel projects is mandatory.

Other Information:

To apply please click on the APPLY NOW button or email your resume to search84@searchindex.com.sg with the following detail:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified.

Lionel Cheow

EA License | 14C7092

EA Registration Number | R1105005

• Well Established Company
• Basic $2800 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression\
• Working location: Gul Circle (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Required to work within the Company workshop where there is no outdoor repair
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful
• Possess Class 3 driving license is an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Up to $7,000 Basic + Bonus + benefits!
• Permanent position/ 5 work days
• Participating in the MRT Tunnel project at West area.
• Having experience in the reinforced concrete and construction of local MRT Tunnel projects is preferred.

Our clients are reputable MNCs and leading A1 Construction diverse in infrastructure projects, civil work, commercial projects

Job Responsibilities:

Supervise RC structural works on site

• Supervise rebar fixing and formwork installation
• Inspect before concrete pouring
• Coordinate with subcontractors
• Review structural drawings
• Ensure alignment and structural tolerances
• Monitor productivity and sequencing
• Handle consultant inspections
• Resolve site technical issues

Requirements:
• Minimum Degree holder in Civil Engineering
• Having experience in RC work in MRT project is preferred.
Other Information:
To apply please click on the APPLY NOW button or email your resume to search84@searchindex.com.sg with the following details inside your resume
• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date
We regret only shortlisted candidates will be notified.
Lionel Cheow
EA License | 14C7092
EA Registration Number | R1105005

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 2 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Location: No. 7 Tuas Avenue 16 Singapore 638934 (Company transport at designated pick up points - Jurong east, Bukit batok, Choa chu kang, Lakeside, Tuas crescent etc)

Working Days: 5 days A Week

Working hours : 8:00am - 5:00pm or 9:00am - 6:00pm (40 hrs per week)

Salary : $2,800 to $4,200 (Based on market rate, subject to individual’s qualification & experience)

Overview

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Extract bill of quantities for steel reinforcements from structural drawings to ensure accurate material planning
• Schedule and draft technical drawings using appropriate tools for submission and production purposes
• Coordinate technical issues with project site personnel to facilitate smooth project progress
• Attend site discussions as needed to resolve technical queries and support project teams

Requirements:

• Min Diploma in Structural/Civil Engineering or QS / Structural Engineering Design or related discipline to support technical understanding
• Working knowledge of AutoCad and Revit-BIM tools to enhance drawing accuracy and efficiency
• Minimum of 1 year of relevant work experience in a similar field to ensure familiarity with industry practices

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities

• Assist in the development, testing, and implementation of front-end and back-end features across the ZAEL platform.
• Build responsive, user-friendly interfaces using React, HTML5, CSS, and JavaScript under the guidance of senior developers.
• Support the development and maintenance of back-end services and APIs using Python frameworks (e.g. FastAPI, Django, or Flask) and PostgreSQL.
• Contribute to data ingestion, processing, and visualisation tasks that help surface vessel data as clear insights for operators and fleet managers.
• Implement and maintain custom analytics logic that applies domain-specific algorithms to raw vessel data, producing the derived insights and performance indicators that sit at the core of ZAEL's value proposition.
• Support debugging, troubleshooting, and optimisation of web applications for performance, responsiveness, and reliability.
• Maintain and update existing codebases to uphold code quality, compatibility, and efficiency as the platform grows.
• Collaborate closely with product managers, UI/UX designers, senior developers, naval architects, and maritime domain experts to translate operational needs into functional features.
• Participate in code review; learn and adopt best practices for full-stack development, testing, and agile delivery.

Requirement

• Bachelor's degree in Computer Science, Software Engineering, or related technical discipline.
• Up to 2 years of experience or relevant internships in software development, with exposure to both front-end and back-end work
• Familiarity with modern front-end frameworks and web technologies, particularly React, HTML5, CSS, and JavaScript.
• Working knowledge of at least one back-end language and framework; experience with Python (FastAPI, Django, or Flask) is preferred.
• Basic understanding of relational databases (e.g. PostgreSQL) and REST API design.
• Basic understanding of responsive and cross-browser compatible design.
• Exposure to version control (Git), containerisation (e.g. Docker), or cloud services (e.g. AWS) is a plus.
• Strong desire to learn, adapt, and grow within a collaborative team environment.
• Good communication and problem-solving skills.
• Experience or interest in the maritime sector or related fields is beneficial but not required.

Other Information
 

• Location: Jurong East
• 5 days work week
• Working Hours: 8am-530pm

1. Assists and supports the Project Manager and Senior Project Executive in planning and controlling all project-based assignments.

2. Responsible for co-ordination of all activities on assigned projects and assist in ensuring successful completion and execution of projects.

3. Liaises with internal parties within the company to implement projects.

4. Ensures effective communication and coordination between all disciplines and project participants in the projects.

5. Assists in planning, scheduling and coordination to ensure proper engineering deliverables and compliance to engineering standards.

6. Assists in all project management and coordination activities delegated by project manager; including day-to-day interaction with clients, preparation of project proposals and production coordination.

7. Assists in all project administration where required.

8. Degree in Engineering with at least 2-3 years of relevant experience.

9. Knowledge of Tekla, AutoCad, etc a benefit.

About Hydroleap:  

Hydroleap is a Singapore-based deep tech startup with a mission of disrupting the wastewater treatment industry. Our cutting-edge electrochemistry technology and innovative approaches to water and waste management have eliminated the need for manual interventions and toxic chemicals, making our solutions fully automated, cost-effective, and environmentally friendly helping industries to be more water and energy efficient.  

With multiple successful deployments across the Asia Pacific region, including in the agri-food, oil & gas, data center, desalination, and construction sectors, Hydroleap is significantly impacting how water and wastewater are treated. As a company, we are proud to be backed by an impressive group of governmental and private venture capitalists, such as UntroD Capital, Mitsubishi Electric, Seeds Capital, State Government of Victoria, Wavemaker Partners,, 500, SGInnovate, Sparklabs, and Entrepreneur First. 

Join our team and be a part of a mission-driven organization that is changing the world, one drop of water at a time.  

Who we are looking for 

As Hydroleap is growing and offering solutions to more clients within the existing verticals as well as the new verticals, we are looking for an enthusiastic, ambitious, and high-energy Automation Engineer who will be in charge of PLC programming, designing control panels, and implementing industrial and commercial electrical systems. 

The Automation Engineer is responsible for the complete design of the electrical and control functions of new and retrofitted small to medium-sized control panels. In this role, you will be working closely with the rest of the engineering team in terms of process, and hardware design to translate control philosophies into a physical control panel containing PLCs and other electrical components. This role involves your presence in the office, factory as well as site. 

What you will be doing 

• Translation of process control philosophies into PLC/SCADA programs using one or more of the programming languages (i.e. ladder logic, function block, Sequential Function, Structured Text) and integrating different hardware components (i.e. pumps, sensors, valves, etc). 

• Planning, organizing, troubleshooting issues, and managing project and electrical activities in close coordination with engineers, supervisors, and manufacturers. 

• Installation, testing, FAT, SAT, and commissioning of control panels and distribution systems on sites. 

• Preparation of risk assessment, and HSE for each project.  

Your Capabilities and Credentials 

• 5 years of experience in PLC and HMI programming projects 

• Experience in remote monitoring and data logging. 

• Experience in CAD  e,g, AutoCAD etc 

We thank all applicants for their interest; however, only those candidates selected for interviews will be contacted. 

1. Plan, design, co-ordinate with other consultants and construction management of Electrical services for all types of building projects.
2. Provide supports in project management and contract administration for building engineering contracts.
3. Preparation of tender documents and technical specification and evaluation of tenders and preparation of tender reports.

Working Location : Tuas
Working Days : Mon to Sat / 8am - 6pm
24/7 standby

1. PREPARATION OF INSTALLATION SCHEDULE

2. PREPARATION OF SUBCONTRACTOR’S CONTRACTS

3. SITE SUPERVISION AND PROGRESS MONITORING

4. EQUIPMENT & MATERIAL ARRANGEMENT, DELIVERY & CHECKING

5. SITE CO-ORDINATION MEETING

6. PREPARATION OF DAILY REPORTS, MONTHLY REPORTS, PURCHASE ORDERS & DELIVERY ORDERS

7. PREPARATION OF BUDGETARY AND CONTROL

8. PREPARATION OF SITE PROGRESS CLAIM

9. SAFETY

10. WORK QUALITY CONTROL

11. PREPARATION OF OPERATION & MAINTENANCE MANUAL

12. COMMISSIONING, PREPARATION AND MONITORING

13 PREPARATION OF AS-BUILT DRAWING

14. PREPARATION OF COST ESTIMATION

• Managing the design of utilities diversion routes, supporting structures and other required structures.
• Coordinate with authorities to facilitate work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with main contractors/clients & approved subcontractors for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site.
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement.
• Preparation of quotations & Purchase Orders to relevant stake-holders.
• Preparation of CIAR (construction impact assessment report) for PUB/LTA.
• Establishment of short & long-term overall utility plan.
• Management of each activity for utility work on site.
• Preparation & coordination with clients & subcontractors for NCE (notification for commencement of earthworks).
• Approval for PTD (permit to dig) related utilities.
• Pegging and demarcation for utilities on site.
• Regular inspection / petrol / visual check for existing utilities.
• Establishment of emergency plan for utilities.
• To check daily, weekly and monthly progress report before submission.
• Must be able to work 6 days per week.
• Bachelor Degree in Civil Engineering or equivalent.
• Minimum 4 years engineering experience in large scale and complex projects.

Responsibilities

• Supervise the timely execution of Mechanical works to ensure compliance with Working/Approved Drawings and applicable local Codes, Regulations, and Standards
• Inspect quality of materials and samples delivered to site and report any non-conformance to specifications
• Monitor contractor performance and progress against planned schedules, providing weekly progress reports
• Prepare and monitor rectification works, ensuring all defects are satisfactorily resolved
• Inspect on-site mock-ups as required to verify compliance
• Witness tests and ensure they follow approved method statements
• Coordinate mechanical and electrical services to ensure seamless integration
• Attend site, progress, variation, and coordination meetings to support project delivery
• Verify and maintain records of all site variations and contractor claims
• Assist Mechanical and Electrical Engineer in project execution tasks
• Ensure all installation work has proper approval from Employer and relevant authorities, maintaining accurate records

Required competencies and certifications

• Diploma in any Engineering or related field

Preferred competencies and qualifications

• [No preferred qualifications explicitly stated in the original JD]

Other Information

• Applicants are encouraged to include the following in their resume:
• Expected salary
• Notice period
• Past project details, including type of construction/building

Duties and tasks:

• Attend product and application training at Head Office in Singapore (Approximately 3 to 6 months). Training is paid.
• Develop a thorough understanding of products and applications through classes, seminars, and on-the-job training.
• Provide technical consultation and service to customers to help solve their applications using products in a variety of industries, selecting and promoting the proper company products/services for their application.
• Demonstrate a high degree of flexibility in adapting to Singapore's expectations and the challenges customers present you.
• Respond promptly and efficiently to customer requests.
• Secure new customers consistently and efficiently.
• Travel to customer locations three days per week and successfully sell products/services into a wide variety of manufacturing & related industries.
• Coordinate account strategy and contribute to territory's strategic plan.
• Successfully implement new product-launch strategies.
• Deliver growth in market share within assigned sales territory.
• Coordinate off-site seminars and trade shows as needed.
• Manage day-to-day activities with little to no managerial supervision.
• Understand and observe company / department policies and procedures.
• Other duties or projects, as assigned.

Requirements and Qualifications:

• Preferably Degree in engineering field. Candidates with a business-related degree would also be considered.
• Interest and aptitude to master company's highly technical products.
• Interest in working in manufacturing environments.
• Excellent presentation, oral and written communication skills.
• Must be able to communicate in English and Chinese.
• Ability to listen and pro-actively react to customer questions and requests.
• Goal-oriented and extremely hard working with a desire to make a measurable contribution to Singapore's success.
• Desire to better yourself through our intensive training, mentorship, engaged management, and pro-active, process-oriented sales approach.
• Understand and abide by all company policies and procedures: including professional dress code, punctuality, attendance, and sales process policies.
• Willingness to travel 60% of the time, including the possibility of overnight travel.
• Preferred to have VALID Class 3 Licence.