Total 13,271 Others/Any job vacancies

KEY RESPONSIBILITIES:

• Contribute to IP selection and architecture definition; create functional specifications.
• Perform PPA evaluation and optimization.Develop RTL for functional blocks/units with architectural features and timing constraints, targeting synthesis and APR.
• Support debugging across RTL simulation, gate-level, and post-layout simulations.
• Conduct quality checks using FE EDA tools such as Spyglass.lint, CDC, RDC, etc.
• Take ownership of the full project lifecycle, from architecture to production.

PREFERRED EXPERIENCE:

• > 10 years of hands-on experience in digital frontend design.
• Strong proficiency in Verilog/VHDL.
• Hands-on experience with logic FE tools (e.g., VCS, Verdi, Spyglass, DC).
• Experience in Static Timing Analysis is a strong plus.
• Prefer candidates with experience implementing advanced-process chips.
• Familiarity with low-power design and power simulation preferred.
• Proficiency in TCL, Perl, or similar scripting languages is a plus.
• Prior experience with multiple tape-outs and chip bring-up is preferred.
• Leadership or management experience is an advantage.

ACADEMIC CREDENTIALS:

• Bachelor or Masters Degree in Electronic Engineering, with years relevant work experience.

~ 5 days work week, Monday - Friday 9am - 6pm

~ Location: Suntec

~ No experience is welcome to apply! On the job training is provided

~ 6 months contract and convertible to permanent based on performance

Our client is a solar energy solution provider in Singapore

Responsibilities:

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Requirements:

• Possesses minimum Degree in Electrical Engineering/Renewable energy-related field
• Minimum 1.5 year of experience in handling solar projects preferred
• No experience is welcome to apply! On the job training is provided
• Has knowledge in electrical design concepts

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to ref32@stafflink.com.sg to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

looking for minimum 2 years relevant Experience , who are interested request to come in working places, must be work weekly 6 days ,

ROLE SUMMARY

We are seeking a hands-on Senior Technical Lead & Solution Architect to anchor the technical direction of complex banking product and platform builds delivered to global financial institutions. The role blends deep engineering leadership with architecture ownership: setting technical standards, designing scalable and secure solutions, leading interface and API development, and steering agile squads through multi-wave delivery across both cloud and on-premises environments. The successful candidate has progressed from senior engineering into a mid-level architecture remit within IT services and/or banking product organisations, and is comfortable operating between code, design authority forums, and client-facing technical governance.

KEY RESPONSIBILITIES

• Solution & technical architecture — own end-to-end solution design for product and integration workstreams; produce HLDs/LLDs, component models, sequence flows and non-functional specifications; chair or contribute to design authority / architecture review boards.

• Engineering leadership — lead technical squads (onshore/offshore) across the full SDLC; set coding standards, branching strategy, code-review discipline and definition-of-done; act as senior escalation point for technical risk.

• Interfaces & API development — design and govern system-to-system interfaces and API contracts (REST/SOAP, event/streaming, file-based and messaging); own interface cataloguing, versioning, schema governance and backward-compatibility strategy.

• Product engineering — drive feature engineering on core banking / transaction-banking products; balance configurability vs. customisation, manage technical debt, and uphold productisation principles for reusable, multi-tenant builds.

• Agile delivery — run agile ceremonies as technical lead; translate epics into technical stories, estimate with the team, and protect velocity while maintaining quality gates and CI/CD discipline.

• Cloud & on-premises deployment — architect for both cloud-native (containers, managed services, IaC) and on-premises data-centre topologies; address HA/DR, scalability, observability and environment management for each.

• Non-functional & security — embed performance, resilience, scalability and security-by-design; partner with infosec on threat modelling, secure SDLC, secrets management and compliance to banking regulatory expectations (e.g. MAS TRM where applicable).

• Client & stakeholder engagement — present designs and trade-offs to bank architecture teams, CIOs and technical SteerCos; defend decisions, manage dependencies and align on integration landscapes.

• Mentorship — coach senior and mid-level engineers, conduct technical assessments, and raise the engineering bar across the delivery centre.

REQUIRED EXPERIENCE & QUALIFICATIONS

• 12–15 years in software engineering with demonstrable progression into a technical lead and mid-level architect role.

• Proven experience across both IT services organisations and software product companies, with substantial exposure to the banking / financial services domain.

• Track record of leading agile product engineering and complex systems integration / interface development for enterprise-grade platforms.

• Hands-on delivery experience across both cloud and on-premises implementations.

• Bachelor's or Master's in Computer Science, Engineering or equivalent; recognised architecture certification (e.g. TOGAF) and/or relevant cloud certification is an advantage.

TECHNICAL COMPETENCIES

Domain

Required competencies

Architecture

Microservices & modular monolith design, domain-driven design, event-driven & layered architecture, API-first design, integration patterns, HLD/LLD, NFR & capacity planning

Languages & frameworks

Java / Spring Boot (core), with working knowledge of one or more of: J2EE, Node.js, .NET, Python; ORM/persistence frameworks

Interfaces & APIs

REST, SOAP, GraphQL (desirable), OpenAPI/Swagger, API gateways, ISO 20022 / SWIFT / MT-MX (banking interfaces), messaging (Kafka, MQ, JMS), file-based & batch integration

Data & persistence

Relational databases (Oracle, PostgreSQL, MS SQL), SQL tuning, schema design; exposure to NoSQL and caching (Redis)

Cloud & infrastructure

AWS / Azure / GCP (at least one in depth), containers (Docker, Kubernetes), Infrastructure-as-Code (Terraform/Helm), on-premises data-centre & VM topologies, HA/DR design

DevOps & quality

CI/CD pipelines (Jenkins/GitLab/Azure DevOps), Git branching strategy, automated testing, code quality (SonarQube), observability (logging, metrics, tracing)

Security & compliance

Secure SDLC, OAuth2/OIDC, TLS/PKI, secrets management, threat modelling, alignment to banking regulatory standards (MAS TRM, ISO 27001 awareness)

Agile & tooling

Scrum / SAFe / Kanban, story estimation, Jira/Confluence, technical backlog management

DESIRABLE / DIFFERENTIATORS

• Domain depth in transaction banking, payments, trade finance, lending or treasury platforms.

• Experience modernising or integrating with legacy core-banking systems.

• Performance engineering and large-scale load/throughput optimisation.

• Experience operating in regulated multi-country banking programmes with onshore/offshore delivery models.

ROLE SUMMARY

We are seeking a Senior Business Analyst with deep functional expertise in Trade Finance and Supply Chain Finance (SCF) to lead requirements, solutioning and functional delivery on global product builds and bank implementations. The role sits at the intersection of banking business knowledge and software product engineering: eliciting and shaping requirements, translating complex trade and SCF business processes into product capabilities and configurations, and steering functional delivery from discovery through UAT and go-live. The ideal candidate has built and implemented global trade / SCF products within an IT product or services organisation, and can engage credibly with bank business heads, operations and technology teams alike.

KEY RESPONSIBILITIES

• Requirements & functional analysis — lead elicitation, analysis and documentation of business and functional requirements; produce BRDs/FRDs, user stories, process flows, use cases and data mappings for trade and SCF products.

• Domain solutioning — translate documentary trade, guarantees, supply chain finance, factoring, receivables/payables finance, risk participation and syndication processes into product capabilities, configurations and gaps/customisations.

• Product build — work with product management and engineering to define and refine global product features; contribute to product backlog, prioritisation, configurability vs. customisation decisions and roadmap inputs.

• Implementation & rollout — support multi-country, multi-wave bank implementations; lead functional fit-gap, solution design workshops, product walkthroughs and configuration definition across cloud and on-premises deployments.

• Interface & data analysis — define functional requirements for interfaces (e.g. SWIFT, AML/sanctions screening, accounting/GL, limits & collateral, FX), data migration mappings and reconciliation rules.

• Testing & quality — author and review functional test scenarios, support SIT/UAT, triage defects, and own functional sign-off and exit criteria.

• Stakeholder management — facilitate workshops with bank business, operations, compliance and technology stakeholders; manage scope, decisions log, RAID and traceability; present to functional SteerCos.

• Regulatory & compliance alignment — ensure solutions reflect trade-specific regulatory, AML/sanctions, and bank policy requirements; align to standards such as URC, UCP, URDG, ISP and ICC rules where relevant.

• Knowledge leadership — act as functional SME and mentor junior BAs; build reusable functional assets, question banks and accelerators.

REQUIRED EXPERIENCE & QUALIFICATIONS

• 12–15 years in business analysis with significant depth in Trade Finance and Supply Chain Finance.

• Experience within an IT / software organisation building or implementing global trade / SCF products (not solely in-bank operations).

• Proven delivery across the full lifecycle — discovery, requirements, solution design, configuration, UAT and go-live.

• Exposure to both cloud and on-premises product implementations.

• Bachelor's or Master's degree; trade finance / banking certifications (e.g. CDCS, CITF, CSDG, CTFP) and/or business-analysis certification (CBAP) are an advantage.

FUNCTIONAL & TECHNICAL COMPETENCIES

Domain

Required competencies

Trade finance

Documentary credits (LC), collections, guarantees & standby LCs, bills, reimbursements; ICC rules (UCP 600, URC 522, URDG 758, ISP98); trade-based AML & sanctions screening

Supply chain finance

Payables finance / reverse factoring, receivables finance, factoring, dynamic discounting, distributor & dealer finance, invoice financing, onboarding & programme structures

Risk participation & syndication

Funded & unfunded risk participation, asset distribution, syndication, limits, collateral and exposure management (desirable / strong plus)

Business analysis

Requirements elicitation, BRD/FRD authoring, user stories & acceptance criteria, process modelling (BPMN), use cases, gap analysis, traceability, RAID & decisions logs

Product & delivery

Product configuration, fit-gap analysis, backlog management, agile (Scrum/Kanban), UAT planning & defect triage, exit criteria & functional sign-off

Interfaces & data

Functional specs for SWIFT (MT/MX, ISO 20022), AML/sanctions, accounting/GL, FX, limits; data migration mapping & reconciliation rules

Tooling

Jira, Confluence, Visio / draw.io, advanced Excel; SQL for data analysis (desirable); test management tools

Soft skills

Workshop facilitation, stakeholder management, executive communication, structured documentation, cross-cultural onshore/offshore collaboration

DESIRABLE / DIFFERENTIATORS

• Hands-on experience with a leading trade / SCF product platform (e.g. iGTB / Intellect, Finastra, Surecomp, CGI, or equivalent).

• Experience on multi-country bank trade back-office implementations across APAC and international branches.

• Familiarity with digital trade, ESG-linked SCF, and emerging trade-digitisation standards (e.g. MLETR, electronic documents).

• Exposure to data migration, cutover planning and reconciliation on trade/SCF migrations

Duties & Responsibilities:

· Achieve the overall business objectives of the Operations department.

· Formulate the business objectives and integrates their functions from the initial project proposal to detailed engineering, project procurement and management, so as to support the overall objectives of the operations department.

· Together with the Operations manager, define pricing strategies based on material take off, market intelligence and competitor knowledge, understanding of cost elements, and past project reference data.

· Together with all the department lead, develop detailed business plans to maximize available material, human resources, and existing structure and processes based on the formulated business objectives.

· Plan skills training and development programs to leverage the knowledge and competencies of employees in detailed engineering of electrical, instruments, control systems.

· Implement the business plans ensuring that they are executed effectively and that continuous efforts are being made to refine and improve the business activities.

· Monitor the Department's budgeted expenditure and take corrective actions to avoid over-running the allocated budget.

· Improve the work flows and processes of reporting Units to ensure that efficiency and productivity are maximized.

· Conducts regular meetings to review operational efficiencies, share knowledge and solve problems.

· Oversee project tender evaluations to ensure that all tender drawings and specifications, technical requirements, quality and safety requirements and implications, and scope and magnitude of projects are clearly understood before tender pricing; and that all tender procedures are complied with, before tender submission.

· Review project costs calculations and quotations, and drawings and recommendations (if any) prepared for proposal/tender submission to ensure that projects are competitively priced and that value-adding elements are highlighted in price justifications.

· Oversee the project management unit to ensure close liaison with customers and staff/sub-contractors of various work disciplines to fully understand project requirements, effectively manage project progress, and make strategic decisions to minimize work stoppage and fulfil delivery lead-time.

· Together with Procurement, formalize purchasing and Inventory management policies and systems.

· Review specifications, quotations and approves project procurement, purchase of new or special/high-value items/equipment, referring to the General Manager for guidance/ approval if necessary.

· Establish guidelines for the qualification/assessment of suppliers and vendors to maintain/improve their level of services to the Company.

· Ensure that all units formalize and update their respective Operations Manual.

Qualification & Experienced Required:

· Degree in Instrumentation/ Electrical Engineering or its equivalent

· Minimum 5 to 8 years of supervisorial role in project & maintenance activities including tender biddings, resource, engineering, project construction, maintenance, shutdown  & turn-around, HSSE and QA/QC compliance. Strong leadership qualities

· Good analytical and quality conceptual skills

· Good communication skills

Electronic Hardware Design Engineer.

Duties and Responsibilities

· Develop electronic hardware from the ground up, while working closely with system designer.

· Create schematic and a thorough QC process

· Hardware safety/reliability analysis and quality assurance.

· Able to work with PCB designer, PCBA assembly plants for prototype fabrication and BOM management.

· Write tests for both existing and new electronic hardware compatibility and stability

Hardware design Engineer Requirements and Qualifications

· Bachelor’s degree in electronic engineering, information technology, computer science, or a related field

· Experience in schematic development for embedded system, analog / RF / Digital / FPGA.

· Experience of Altium designer or other schematic / PCB design tool.

· Experience on TI, Xilinx electronic components and selection / assessment tools.

· In-depth understanding of network communication.

· Working knowledge of TI ARM / Xilinx SoC IDE.

Job Title - MRO Engineers

Location - Ang Mo Kio

Type - 1 year contract, renewable

Description -

Will be a part of the Maintenance, Repairs, Overhauls (MRO) – Engineering team to ensure the smooth functioning of our engineering, quality and reliability processes supporting Ground Support Equipment (GSE) maintenance operations at the customer’s premises. Will play a key role in maintaining operational reliability, troubleshooting issues, engaging the customer in technical/engineering issues, and implementing process improvements to enhance efficiency and performance.

Troubleshoot, analyze, and resolve technical issues utilizing practical fault tree analysis methodologies to minimize GSE downtime.

Conduct failure mode analysis and recommend enhance maintenance scheme to improve GSE reliability.

Communicate with the customers on troubleshooting, failure mode and corrective/preventive actions on technical defects.

Prepare technical report and presentation deck for submission and presenting to the customer when required.

Develop, review, and update technical documentation including maintenance manuals, repair procedures, and engineering change requests.

Perform spare parts obsolescence management which include identifying obsolete spare parts and mitigating risk through monitoring, alternative parts identification and build safety stocks.

Collaborate closely with operations, quality assurance, and supply chain teams to optimize maintenance schedule planning.

Respond to urgent technical issues, emergencies during off-office hours and weekends when necessary.

Ensure compliance with safety, security, and regulatory standards.

Job Description & Requirements

Support the project team in planning, scheduling andcoordinating the civil & structural works (site).

· Manage on-site construction works anddocumentation

· Assist in overseeing engineering deliverable andmulti-disciplinary works in order to meet project quality requirements.

· Ensure that on-site construction works are carriedout accordingly to local regulations and requirements and meet project qualityrequirements.

· Assist in preparing civil and structural designsand contract specifications

· Coordinate work with other disciplines such ascivil, architectural, mechanical and electrical.

· Prepare and compile related report

· Planning physical works on site through schedulingworks and agreed timelines, sequencing of construction works

· Any other ad-hoc duties assigned

Requirements:

· Minimum 7 years’ civil site experience

· Experience in LTA project will be an addedadvantage

· Able to work under fast paced environment

· Degree in Civil Engineering

Job Description:

• Review and interpret technical drawings and specifications to ensure construction aligns with design intent and engineering standards.
• Prepare technical submittals, calculations, and method statements to provide detailed documentation for construction compliance and approvals.
• Resolve on-site technical issues promptly to minimize delays and maintain project quality standards.
• Coordinate with contractors, subcontractors, and consultants on technical matters to ensure smooth implementation of designs and resolve conflicts proactively.
• Enforce adherence to engineering standards, quality requirements, and regulatory codes to reduce rework, maintain safety, and comply with legal requirements.
• Plan and execute engineering works efficiently to optimize construction methods and resource utilization for high-quality project delivery.
• Perform any additional tasks assigned by the superior to support project objectives and project team effectiveness.

Job Requirements:

• Bachelor’s degree in relevant Engineering discipline (Civil, Structural, Mechanical & Engineering, or related field).
• Minimum 3 years in engineering or technical roles within construction projects, preferably with site experience.
• Technical drawing review and interpretation.
• Preparation of submittals, calculations, and method statements.
• On-site troubleshooting and technical problem-solving.
• Knowledge of engineering standards, codes, and quality requirement.
• Familiarity with engineering software and construction methods.

RESPONSIBILITIES:

Manage site activities, vendors and sub-contractors.

Attend meeting, coordination, prepare works schedule & site supervision.

Supervise construction and civil works on site.Review project specifications, technical clarifications, and construction drawings.

Carry out works scheduling, material requisition, cost control, project supervision,and documentation.

Ensure timely and smooth progress of works.

Responsible for all aspects of site safety.

REQUIREMENTS:

Diploma/Degree in Civil Engineering.

Minimum 2 years related Project experience.

Good communication & interpersonal skills.

Excellent project skills.

Good team player and adaptable to a dynamic environment.

Duties and Responsibilities

Mechanical engineers are essential in advancing technology and innovation by constantly improving and optimizing mechanical systems to meet the needs of modern society. Here is a comprehensive list of their key responsibilities:

Designing Mechanical Systems: Mechanical engineers are responsible for creating and developing mechanical systems and products. This involves conceptualizing, modeling, and detailing designs for components or entire systems.

Analyzing and Testing Designs: Mechanical engineers perform analytical and computational assessments of designs to ensure they meet functional requirements, safety standards, and regulatory guidelines. They may also conduct physical testing and prototype development.

Project Management: Mechanical engineers often take on project management responsibilities, overseeing the entire product development lifecycle. This includes planning, scheduling, budgeting, and coordinating the efforts of a multidisciplinary team.

Materials Selection: Engineers choose appropriate materials for the construction of mechanical components, considering factors such as strength, durability, and cost. They also evaluate the environmental impact of material choices.

Thermal and Fluid Systems: In industries like HVAC, aerospace, and automotive, mechanical engineers design thermal and fluid systems. This involves optimizing heat transfer, fluid flow, and energy efficiency in systems like engines, cooling systems, and HVAC systems.

CAD Modeling and Drafting: Proficiency in computer-aided design (CAD) software is essential for mechanical engineers. They use these tools to create 3D models and detailed drawings of mechanical components and assemblies.

Manufacturing Support: Mechanical engineers work closely with manufacturing teams to ensure that designed products can be efficiently and cost-effectively produced. They may provide input on production processes, tooling, and quality control.

Quality Assurance and Control: Ensuring the quality of manufactured products is a key responsibility. Mechanical engineers develop and implement quality control procedures, conduct inspections, and address any issues related to product quality.

Research and Development: Mechanical engineers often engage in research and development activities to explore new technologies, materials, and methodologies. This can involve staying informed about industry trends and advancements.

Regulatory Compliance: Mechanical engineers must be aware of and adhere to relevant industry standards, codes, and regulations. They ensure that designs and products comply with safety and environmental requirements.

Collaboration and Communication: Effective communication is essential, as mechanical engineers collaborate with cross-functional teams, present design proposals, and provide updates on project progress. They may also communicate with clients, vendors, and regulatory authorities.

RESPONSIBILITIES:

Manage site activities, vendors and sub-contractors.

Attend meeting, coordination, prepare works schedule & site supervision.

Supervise construction and civil works on site.Review project specifications, technical clarifications, and construction drawings.

Carry out works scheduling, material requisition, cost control, project supervision,and documentation.

Ensure timely and smooth progress of works.

Responsible for all aspects of site safety.

REQUIREMENTS:

Diploma/Degree in Civil Engineering.

Minimum 2 years related Project experience.

Good communication & interpersonal skills.

Excellent project skills.

Good team player and adaptable to a dynamic environment.

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

Roles & Responsibilities

· Assist Project Manager and his deputy on day-to-day management, site technical/ engineering matters and authority submissions.

· Prepare method statements, monthly progress claims measurement and reports.

· Co-ordinate with sub-contractors and consultants.

· Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications

· Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards & contractual specifications.

· Interpret engineering documents and drawings for field personnel

· Ensuring environmental, safety and health practices are carried out at all times.

· Perform other duties / tasks as assigned by immediate superior or Head of department.

Requirements

· Degree in Civil or Structural Engineering recognised by Professional Engineers Board or qualification acceptable by Commision of Building Control for registration as Resident Engineer

· Min. 3 year work experience in Local Civil Engineering projects

· Proficient in MS Office

· Strong and clear communication skills with proven ability to engage others

· Organised, meticulous with positive work attitude

· Able to work independently and a team player

our company looking for Electrical engineer with 1-5 year experience.Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan • Provide engineering support in project or plant maintenance • Coordinate internal and external audit review • Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices. • Procedures for inspection, testing and certification of electrical fixed installations. • Industrial hazards, safety and health precautions, and environmental concerns. • Installation practice and regulations, and relevant codes of practice

Min. Diploma or Degree in Electrical Engineering or equivalent • Min. 1-5 year of relevant experience in electrical work

• Liaise / Meeting / Coordination with clients, contractors and supplier.
• Preparation and submission of drawings or documents.
• Monitor site progress and arrangement of work activities.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Plan and schedules works with reference to contractual schedules

Job Requirements:

• Minimum one HDB project completion is REQUIRED

Job Description

• Comply with the local construction code and approved Quality document
• Assist project teams to identify quality requirements and develop Project Quality Plans for projects
• Conduct inspection reports for all subcontractors work to ensure alignment with the quality standards
• Assist Project Teams with control vendor performance/non-conformance issues and implement actions to correct non-compliance
• Prepare and submit Request for Inspection (RFI) to consultant prior to official QA/QC inspection and testing activity
• Carry out the execution of the project as per plan
• Register all incoming materials and items for the project
• Responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements
• Review project safety (e.g. lifting plans, etc.)
• Other ad hoc duties as assigned

Job Requirements

• Diploma or Degree in Civil Engineering or equivalent
• At least 2 to 5 years of working experience in the related field is required
• Ability to work with tight deadlines
• Work closely with project team to resolve technical issues
• Good attitude and communication skills
• Willing to multi-task
• Need to be stationed at site
• Location: East

• Execute projects from pre-order engineering and cost estimation to post-order engineering and project management
• Provide technical consultation and solutions for customer enquiries, supporting both clients and the service sales team
• Perform risk analysis and manage project information, including communication plans with stakeholders
• Prepare and maintain project documentation, including phase gate reviews, design reviews, schedules, and quality/safety plans
• Monitor project progress, proactively managing delays, claims, warranties, and customer complaints
• Ensure timely delivery of engineering outputs and project milestones
• Coordinate effectively to support the development of drawings and design documentation
• Oversee engineering, project execution, and installation/commissioning phases
• Ensure projects are completed according to schedule and meet all required standards and specifications
• Maintain accurate and compliant project documentation

Requirements:

• Diploma or bachelor's in civil engineering
• Relevant certifications (Singapore-based)
• Proficient in AutoCAD; able to read and revise drawings
• Skilled in MS Office (Word, Excel) and Internet tools
• Comfortable in a fast-paced, high-pressure environment
  Proven experience in project coordination or engineering project management
• Strong technical knowledge and problem-solving skills
• Excellent communication and stakeholder management abilities
• Ability to manage multiple projects and meet deadlines
• Familiarity with project documentation, risk assessment, and quality/safety standards
• Experience in installation and commissioning projects is an advantage

Responsibilities:

• Perform daily SAP operations.
• Formulate reasonable production plans based on market sales forecasts to meet customer demand with the most economical inventory.
• Optimize production plans, regularly analyze plan execution status, and drive improvements in plan execution rate to ensure delivery performance.
• Improve production efficiency (OEE).
• Manage and plan the procurement of operation-related production materials.
• Handle logistics for wafers, production-related materials, parts, and finished goods.
• Develop production material plans to ensure the timely completion of production tasks and the rationality of material inventory levels.
• Any other ad-hoc tasks as assigned. 

Requirements:

• Minimum Bachelor in a Science or Engineering field.
• Experience in logistics planning / supply chain management (experience in 6/8-inch FAB or similar environment is preferred).
• Strong communication skills to communicate effectively with stakeholders
• Proficient in Windows operating systems and Office software.
• Skilled in using material management systems such as SAP & ERP.
• Proficient in SQL and Python.
• Fresh graduates are welcome to apply

The Facilities Engineer supports the operations and maintenance of Grade A commercial buildings to ensure smooth daily operations, optimal building performance, and compliance with safety and regulatory requirements. The role involves coordinating maintenance activities, supervising contractors, planning shift operations, and supporting facility improvement initiatives.

Roles & Responsibilities

• Support the daily operations and maintenance of building facilities and M&E systems, including ACMV equipment, chillers, electrical systems, and BMS
• Plan and coordinate shift schedules and manpower deployment to support operational requirements and building coverage
• Assist in the planning, coordination, and execution of preventive and corrective maintenance works
• Supervise contractors and service providers to ensure works are carried out in accordance with operational, safety, and quality standards
• Support integrated system testing, annual shutdown activities, and facility improvement projects
• Monitor building systems performance and respond to operational or technical issues in a timely manner
• Assist in troubleshooting M&E system faults and coordinate rectification works with vendors and contractors
• Support cost management activities including quotation sourcing, price comparison, and vendor coordination
• Prepare maintenance reports, operational updates, incident reports, and other technical documentation
• Coordinate with clients, tenants, contractors, and relevant authorities on operational and maintenance matters
• Ensure compliance with Workplace Safety and Health (WSH) requirements, fire safety regulations, and company policies
• Support ad-hoc operational duties and projects assigned by Management

Requirements

• Diploma in Mechanical Engineering, Electrical Engineering, Facilities Management, or related discipline
• Relevant experience in facilities management or building maintenance within Grade A commercial buildings
• Knowledge of ACMV systems, chillers, BMS, and M&E infrastructure
• Experience in planning shift schedules and manpower deployment will be an advantage
• Good troubleshooting, coordination, and problem-solving skills
• Good interpersonal and communication skills
• Proficient in Microsoft Office applications
• Able to work independently and in a fast-paced operational environment
• Shift work is required (including rotating shifts)

About our client: Our client operates in the process and industrial plant engineering design and consultancy sector, supporting industries such as Oil & Gas, Power Generation, Petrochemical and Refining.

About the role:

• Reviewing project scope and budget
• Designing schedules and project execution plans
• Contributing to project cost, quality, scope, and schedule control to ensure on-time delivery within budget
• Leading document design reviews and customer meetings
• Programming PLC-based systems using customer-supplied design documents and proprietary libraries
• Developing Factory Acceptance Test (FAT) plans and leading customer-witnessed FAT activities
• Performing commissioning activities and supporting end users with process troubleshooting
• Alerting Operations Manager and Project Manager of potential or current project issues
• Reviewing customer specifications to support preparation of accurate sales proposals when required
• Travelling within the Asia Pacific region to support project execution and site activities

About you:

• Bachelor’s Degree in Electrical, Mechanical, Mechatronics, or equivalent experience
• Minimum 1 year experience in PLC-based control system design in Oil & Gas, Power Generation, Petrochemical, or Refining industries
• Proficient in MS Outlook, MS Project, Excel, Visio, and IEC 61131 PLC programming languages
• Experience in turbomachinery control applications, including gas turbines, steam turbines, motor drives (VFD, induction and synchronous), surge protection, generators, AVR, and vibration monitoring
• Bently Nevada configuration and Allen-Bradley PLC design/programming experience preferred
• Positive attitude and strong initiative
• Willingness to travel for overseas assignments

Other:

• Work location: Central
• Work hours: 5-day workweek

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Kimberly Wong

EA Personnel Reg. No.: R1984508

Project/ Tender Support

• Prepare and assist senior engineers in developing project plans, schedules, and documentation during project or tender phase, demonstrating understanding of project management methodologies.
• Prepare and maintain project documentation, including daily progress reports, site diaries, and as-built drawings.
• Coordinate with contractors, subcontractors, and vendors as needed.
  Support site inspections and quality control checks.

Technical Assistance

• Understand client’s requirement and prepare engineering calculations and drawings under the guidance of senior engineers.
• Prepare and assist in the selection and specification of equipment and materials.\
• Research and analyse technical data.

Quality Assurance

• Conduct site inspections and quality control checks to ensure project compliance.
  
• Prepare and implement method of statement and processes for quality assurance.
  
• Coordinate and carry out testing and commissioning activities to ensure systems are operational and meet performance requirements.
• Prepare operational and maintenance manuals and as-built drawing for project handover.

Learning & Development

• Actively seek opportunities to learn and develop technical skills.
• Participate in training programs and workshops.
• Contribute to a positive and collaborative team environment.

Requirements:

• Bachelor's degree in Mechanical Engineering.
• Minimum 2 years of relevant experience in the construction industry.
• Basic understanding of MEP systems and design principles.
• Proficiency in MS Office Suite, and CAD software (e.g., AutoCAD).
• Strong attention to detail and organizational skills.
• Willingness to learn and adapt to new technologies and industry trends

A senior position may be offered depending on the candidate’s experience.

Job Description:

• Resolve all the technical or engineering issues related to that arise during the course of construction;
• Direct daily overall works activities, answer questions about technical aspects and guide workers throughout the construction process
• Attend all necessary project meeting to ensure projects are executed in a smooth and effective manner;
• Handle complaints, settle disputes, and resolve grievances and conflicts, or otherwise negotiating with others;
• Evaluating tenders received for construction works;
• Data collection (e.g Schedule, job progress, costing sheet etc) to correctly evaluate project performance
• Handle project documentation, material requisition, and cost control;
• Check and analyse drawings, authority requirements and tender specifications
• Check site installation whether it is in accordance to design and standards
• Check and prepare for discrepancies of drawings to be highlighted to consultant
• Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications
• Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.
  
  
  Requirements:

• At least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent
• Knowledgeable in basic Autocad software
• Has positive attitude and sense of responsibilities
• Willing to travel island wide for multiple projects as per assigned and working location will vary after project completion
• Detail oriented and excellent organization skills
• Able to commit standby after office hour as well as during weekends / PH to attend to any emergency calls
• Have a sense of urgency and confidence to thrive under pressure from various sides of internal parties and also external parties due to time constraints of certain projects /within tight deadlines
• 6 days per week
• Construction site working environment without air-conditioner
• We are regret that only shortlisted candidates will be notified