Total 2,772 Others/Any job vacancies

Contract: 1 year (Renewable)

Salary range: $2500 - $3000 + Performance Bonus + Shift Allowance

Working location: Upper Changi Road North

Working schedule: (Mon to Fri) Day Shift - 7am - 4pm, Noon Shift - 4pm - 1.30am (shift can be chosen)

Job Descriptions:

• Build, repair, and test electrical, electro-mechanical, vacuum, and pneumatic assemblies, subassemblies, and components by following work orders, schematics, wiring diagrams, parts lists, and written or verbal instructions

• Perform electro-mechanical assembly operations, troubleshooting, and repairs, identifying issues and implementing corrective actions

• Operate test fixtures, electronic measurement equipment, leak detectors, and vacuum pumps to verify functionality and performance of assemblies and components

• Accurately record work progress, labor details, and expenses using computer systems

• Conduct inspections on parts and completed work to ensure quality standards are met and defects are identified

• Receive, audit, and verify parts to ensure all required materials are available for build, test, and repair activities

• Maintain a safe, clean, and secure work environment by strictly adhering to all safety standards, policies, and procedures

• Attend mandatory health and safety training and consistently follow safety and security guidelines

• Promptly report any accidents, injuries, safety hazards, or emergency situations to the supervisor or Safety Department

• Use tools, equipment, and personal protective equipment correctly and responsibly to prevent accidents and injuries

• Support process improvement initiatives and participate in testing activities to enhance efficiency, quality, and reliability

• Perform basic computer programming, system repairs, or software installations when required

Job Requirements:

• Minimum NITEC qualification in Electrical, Electronics, Mechatronics, or a related engineering discipline

• Ability to read and interpret schematics, wiring diagrams, parts lists, and work instructions

• Hands-on experience in electro-mechanical assembly, testing, troubleshooting, and repair

• Familiar with using test fixtures, electronic measurement equipment, vacuum pumps, and leak detectors

• Basic computer skills for data entry, reporting, and system updates (programming or software installation is an advantage)

• Knowledge of safety standards and commitment to maintaining a safe, clean, and secure work environment

• Able to identify defects, perform audits on parts, and ensure material readiness

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R25157619 | EA Personnel Name: Kauthamen Appu
You may also reach me at 9172 3964 for further information.

• 5 days work week (Office Hour)
• Good Pay + Good Bonus + Good Allowance
• Location at West/ North

Responsibilities:

• - Operate Reactor and mixing tanks to meet daily production targets
• - Controlling and maintaining process parameters of Reactor
• - Usage of flow meters and pumps to dose resins and solvents
• - Use of drums to dose solvents
• - Perform simple chemical analysis to check in-process quality
• - Operate the grinding mills and mixing stirrer
• - Operate pumps and filters to pack products into drums or IBC containers

Requirement

• - Prior experience in a manufacturing environment is a plus but not required
• - Forklift license is mandatory

Interested Candidates please send an updatedresume / CV in Ms Word format to click apply or Whatsapp your Resume detail to 98332779(SMS only without call).

Consulting in-charge : Quah li lian (Registration no : R1983769)

• Duration: 1 year contract (Renewable/ Convertible)

• Location: Changi Airbase

• Working Hours: Monday to Friday: 0800 to 1745

• Salary Range: $2600 - $3000 + Completion Bonus

Job Responsibilities: 

• Perform preventative maintenance on Ground Support Equipment (GSE) in accordance with maintenance checklist and ensure high quality workmanship

• Carry out any corrective maintenance tasks and solve any problems encountered to ensure smooth operation in the maintenance works

• Effectively execute any other GSE Work Instructions

• Carry out the work activities to meet the quality standard and committed turn-around time (TAT)

• Inspect and report any product / service problem and execute corrective action

• Provide feedback and suggestion to improve on work activities and procedures

Job Requirements:

• Minimum Nitec or equivalent qualification relevant to maintenance works

• At least 1 year of working experience in an automotive or other relevant maintenance related industry

• Minimum Class 3 Driving is preferred to operate and drive Vehicles and Tow Tractors (Plus)

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R25157619 | EA Personnel Name: Kauthamen Appu

You may also reach me at 91723964 for further information.

Responsibilities:

• Operate, monitor, and maintain Clean/Black Utilities andHVAC systems via BMS/EMS, ensuring compliance in GMP and non-GMP environments.
• Perform daily inspections, log system data, troubleshoot issues, and escalateabnormalities to minimize downtime.
• Support commissioning, projects, SOP/URS documentation, and coordinate withinternal teams and external vendors.

Requirements:

• Minimum Diploma
• Boiler certification Level 1/2
• Able to work in cleanroom environment

Kindly email your resume in a comprehensive Word formatto jacqueline.goh@talentvue.com.sg

We regret to inform that only shortlisted candidates willbe notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us tocollect, utilize, or disclose their personal information for the purposesrelated to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

• Assist the pharmacist in the processing of medication orders for inpatient and outpatient dispensing which includes typing, packing, labeling and distribution of drug supplies to the wards and other hospital departments
• Perform billing functions and ensure that cost and revenue of all stocks supplied are recovered.
• Assist the pharmacist in the processing of medication orders for sterile and extemporaneous preparations according to USP guidelines.
• Perform compounding of antibiotic infusers, eye drops, syringe preparations and topical creams according to the prescriptions and orders.
• Ensure maintenance, sanitation and organization of clean room and related equipment according to policies and procedures.
• Dispense medications under the supervision of a pharmacist.

Requirements:

• Minimum Diploma in pharmaceutical
• Min 1 year of Pharmacy tech exp

Office hours, Mon to Fri

Interested candidates, please forward your resume to Kevynhuang@recruitexpress.com.sg

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Location: Tuas West
• Shift Pattern: 12-hour rotating shifts (2-2-3 pattern; Day & Night)
• Salary: Gross up to $2,800 – $3,500/month (includes fixed allowances) 
• Benefits: Annual Leave | Full Medical Coverage | AWS + Performance Bonus 

Your Responsibilities:

• Operate and monitor chemical production processes to ensure output meets quality and safety standards
• Perform basic maintenance and troubleshooting on machinery and equipment
• Participate actively in safety meetings and emergency response drills
• Support cross-training within the team to enhance productivity

What We’re Looking For:

• Prior experience in chemical manufacturing or production 
• Comfortable working 12-hour shifts on a rotating schedule
• Strong commitment to safety, teamwork, and operational excellence

Why Join Us?

• Permanent opportunity with stable career growth
• Attractive salary package with great employee benefits
• Quick hiring process – 1 round face-to-face interview only! 

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy). 

This authorizes us to: 

Contact you about potential opportunities. 

Delete personal data as it is not required at this application stage. 

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted. 

Poh Tze Qi (Kayley) | R2197837  

ScienTec Consulting Pte Ltd | 11C5781

Job Description:

• Performs picking/packing of medications under Bin Coding System

• Supports Medication Delivery Service (MDS) and PILBOX/EZYBOX Services for remote collection of medications

• Assists in patient management of Scriptless Dispensing workflow
• Perform other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in pharmaceutical
• Min 1 year of Pharmacy tech exp

Islandwide
$20 / hour
Office hours
4 days / 5 days / 5.25 days

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Job Description:

• Responsible for setting up DB box and temporary electrical supply
• Install decorative lighting such as rope lights, fairy lights, etc
• Responsible for troubleshooting, maintaining, repairing and servicing of electrical equipment
• Perform a wide variety of general work such as painting, carry equipment, cleaning etc
• Supervise and lead operations team to ensure works are done in a timely and safe manner
• Other ad-hoc duties as assigned

Requirements:

• Strong technical knowledge and hands-on experience
• Pro-active and good working attitude
• Team player

Job Description:

• Provide day-to-day support to user queries and problems and performance resolutions.

• To provide administration, maintenance and end-user support for key business systems.

• Install and maintain IT related components in outlets.

• Install and configure appropriate software and functions according to specifications.

• Set up workstations with computers and necessary peripheral devices (routers, printers etc.)

• Adhoc projects and other IT related matters.

Job Requirements:

• Preferably Nitec/ITC/Diploma in Information Technology, Computer Science or related discipline

• 0-1 years of relevant experience

• Possess basic knowledge in IT infrastructure such as network, VPN, Server etc

• Assembly of hoses (large bore), including crimping and cutting of hose
• Know how to differentiate various types of fittings
• Retrieve goods according to work order/sales order
• Load/unload goods
• Prepare and pack the goods for shipment in a proper manner in accordance to shipping schedule and delivery note
• Housekeeping –keeping the work area clean and tidy
• Upkeep safety standards in the workplace

Job details and requirements:

• Willing to work overtime as required
• Able to work under pressure
• Able to organise tasks and delegate work
• Have a forklift license
• Monday to Friday – 8.15am to 5.15pm
• Saturday – 8.15am to 12pm
• Company located within walking distance of Pioneer MRT Station

Overview

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. 

This role is based in Ang Mo Kio, Singapore.

Responsibilities

• Perform Calibration and Measurement of Dimension gauges and instruments as per WI using CMM, reference master, tester etc (on-site and in-house) with report and necessary administrative work
  
• Conduct routine maintenance and calibration of lab equipment as schedule and assigned
  
• Ensure proper delivery of service to customer(s)
  
• Help manager to manage day-to-day calibration work in the labs reference to ISO17025 standard, eg. Quality/ Job Planning/ Job Assignment/ Customer Requirements etc
  
• Any other duties as assigned by Manager/ Section Head/ Senior staff
  

Skills / Qualifications

• ITE/GCE/ Diploma in Aerospace/ Precision / Mechanical Engineering etc

• 2 to 3 years working knowledge in QC/QA or Calibration / Testing field.

• Ability to read and understand technical drawing and GD&T.

• Ability to analyze and compile Calibration / testing data from the Calibration/ tests performed

• Good to have 2 to 3 years CMM knowledge.

• Good to have ISO17025 and measurement uncertainty knowledge

• Possess strong computer skills

• Basic Mathematical Skills. Ability to apply concepts of basic algebra and geometry a plus

Physical Demands:

• Frequency of required physical force: Minimum (moderate)

• Lifting requirements: lifting <50 lbs. often and >50 lbs. on occasion

• Ability to stand on feet for long periods of time

• Ability to lift 50+lbs periodically

Company Overview

Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today’.

When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.

While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development.

Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization.

JOB SUMMARY:

Provide Mechanical and Electrical maintenance service in the Hotel ensuring guest rooms, building facilities and equipment are in functioning condition.

RESPONSIBILITIES:

• Responsible for working a shift system as establishment.
• Perform preventive maintenance program on hotel M&E equipment, including plumbing/sanitary system to standard.
• Execution of maintenance work order in guest rooms, public areas and hotel facilities.
• Perform maintenance repair work in general building and grounds at various sites including electrical, plumbing, painting tasks.
• Respond to maintenance issues immediately upon notification.
• Routine inspection of all public areas to ensure good condition and corrective action is taken accordingly.
• Serve as an active member of hotel emergency response team.
• To carry out other job assignments by superiors.

REQUIREMENTS:

• Perform tasks independently or with minimum supervision.
• Possess basic communication skills.
• 1 year of M&E experience
• Ability to work on 3 rotating shifts (weekends/PH inclusive)
• Singaporean are welcome to apply

Job Title: Mechanical Technician

Job Description:
We are seeking a skilled Mechanical Technician to support installation, maintenance, and troubleshooting of mechanical systems and equipment. The candidate will be involved in site works, inspections, and coordination with project teams to ensure smooth operations.

Key Responsibilities:

• Carry out installation, testing, and commissioning of mechanical equipment
• Perform preventive and corrective maintenance works
• Troubleshoot mechanical faults and provide effective solutions
• Read and interpret technical drawings and schematics
• Ensure all works are carried out in accordance with safety regulations and procedures
• Coordinate with supervisors, engineers, and site teams on daily activities
• Maintain proper documentation and service records

Requirements:

• Diploma / Higher Nitec / equivalent in Mechanical Engineering or related field
• Minimum 2–3 years of relevant working experience
• Hands-on experience with mechanical systems, tools, and equipment
• Ability to work independently and in a team
• Willing to work on-site and follow project schedules

Additional Information:

• Candidates with experience in construction, engineering, or industrial projects will have an advantage
• Good understanding of workplace safety practices is preferred

About us:

Cyrus Technology started in 2005 with the vision to approach polymeric tooling design in unconventional methods and providing manufacturing solutions to exacting specifications for ultra-precision and complex moulding. We pride ourselves as a valued partner to our clients, offering expertise at every stage of the product design to manufacturing, to transform market opportunity ideas to a marketable product. With the progress we achieved so far, we aim to continue to push boundaries and overcome constraints to be a leader in the industry.

About the Job:

You will be joining the grinding department that is responsible for operation of surface grinding machines for precision parts. You will be responsible for fabrication of new projects and maintenance of on-going projects as per required.

- To operate and maintain surface grinding machines as per project requirements and machine maintenance guidelines.

- To perform meticulous checks on workpiece steel dimensions.

- To perform minor equipment maintenance when required.

- Responsible for work planning and scheduling as per project timeline to achieve KPI.

Your areas of knowledge and expertise that matter most for this role:

· ‘N’ level certificate.

· Have at least 3-5 years of experience.

· Able to read and understand 2D drawings.

· Good interpersonal communication abilities.

· Meticulous with good attention to details.

Key Responsibilities

•Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

•Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

•Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

•Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components.

•Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software Details finished work.

•Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements:

•Has developed analytical skills and application of scientific methods to perform a variety of activities

•Has good understanding of how the team integrates with others Leadership

•Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

•Uses communication skills to exchange of information

Qualifications

Education: Technical Diploma

Years of Experience: Up to 1 Year

Job Responsibilities

• Conduct on-site checks and repairs
• Ensure quality works are be carried out on time schedule
• Perform ad-hoc tasks as required, including assisting other facilities department team members
• Job may include moving stock inventory check
• To perform all duties in accordance with MBS policies and within the realm of the MBS Company vision, mission and values
• Enforce all safety programs and training with regards to WSH
• Provides input into the research, development, evaluation and implementation of new products, services, technology and processes to ensure MBS competitive position and in anticipation of changing customer needs within the dynamic hospitality and gaming environment

Job Requirements

Education & Certification
• Secondary education preferred.

Experience
• Minimum 3 years of solid hands-on practical working in any Integrated Resorts, Hotels, Conference and Exhibition Center and/or shopping mall providing Customers Service, Operations supports, and maintenance of plant and systems.
• Have an intimate knowledge of all major systems, their operation, and potential weaknesses.
• Preferably experience working outdoors and be exposed to various environmental factors such as, but not limited to fatigue, noise, dust, and be able to access all areas of the property including those at height.

Other Prerequisites
• Willing to work various shifts, including mornings, afternoons, and overnight, as well as on public holidays.
• Possess good communication and interpersonal skills, with an eye for detail

Primary services include hardware maintenance, installation, basic software support (inhouse training provided)

Manage customer incidents as assigned; Build working relationships with customers (end user).

Responsible for ownership of all customer issues/needs that are voiced or observed and acts appropriately;

Verify that the site environment meets the requirements prior to installation or rollout; Install customer systems according to the installation plan, certify that the installation or setup of the product meets the customer's requirements

Analyze and correct all technical problems on equipment within assigned customer accounts.

Perform periodic preventive maintenance routines on products and installs modifications to equipment.

Routine jobs to overhauls and maintenance repair. May also perform required modular swaps and unit replacements or perform preventative maintenance services

Responsible to response to a customer call on time and to keep customer informed during the problem resolution process. Perform service verification and customer satisfaction surveys relating to the situation

Responsible for capturing detailed customer asset information and other data required to complete any invoicing or billing activities

Role Responsibilities:

•Use work orders (including schematics, wiring diagrams, parts lists, and instructions) to build, repair and/or test equipment of various kinds (electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components)

•Perform a wide variety of electro-mechanical assembly operations, troubleshooting and repairs

•Receive parts and perform audits to ensure all necessary parts are available; inspect parts for defects; troubleshoot and improve processes

•Use test fixtures, electronic measurement equipment, leak detectors and/or vacuum pumps to test assemblies, subassemblies and components

•Complete required job documentation (data entry) about progress, work expense and labor details; perform computer programming, repair or software installs, as needed

•Work independently with minimal supervision, and serve as an informal resource for junior colleagues

Minimum Qualifications:

•NITEC, Diploma

•2–4 years of semiconductor or display experience, or comparable industry or military experience

•Related technical trainings and certifications

Preferred Qualifications:

•Solid analytical skills, and an ability to problem-solve using established operating procedures or scientific methods

•Demonstrated capability to operate as a peer leader and trainer

•Demonstrated proficiency for required semiconductor manufacturing concepts and processes

•ASSEET

•BSEET (DeVry, TSTC)

Physical Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts. Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Company Overview

Serial MultiVision (SMV) Pte. Ltd., the turn-key solution arm of publicly listed Serial System Limited in Singapore, delivers specialized solutions in healthcare and hospitality across the region, including Digital Signage, IPTV, Smart Room Automation, and Visitor Management Services.

Job Summary

Join Serial MultiVision as a Service Technician to support installation, testing, commissioning, and maintenance of electrical and security systems across regional projects.

Responsibilities

• Assist in installing, testing, commissioning, and troubleshooting CCTV systems, electrical wiring, cabling, and electronic circuits to ensure operational functionality
• Participate in implementing security projects by coordinating technical tasks and site activities
• Coordinate site activities to perform daily corrective and preventive maintenance, ensuring system reliability and safety
• Execute other assigned duties to support project and operational needs

Required competencies and certifications

• Possess Nitec or Higher Nitec certification in Electronic or Electrical Engineering
• Own and operate a motorbike for site travel

Preferred competencies and qualifications

• On-the-job training will be provided to develop required skills and knowledge

• Apply knowledge of welding codes and standards to ensure compliance and safety during welding operations
• Inspect welds for quality and accuracy, maintaining high attention to detail throughout the welding process
• Collaborate effectively with team members or work independently to complete welding tasks on schedule
• Maintain a safe work environment by following safety protocols and procedures during all welding activities

Job Description:

• Responsible for setting up DB box and temporary electrical supply
• Install decorative lighting such as rope lights, fairy lights, etc
• Responsible for troubleshooting, maintaining, repairing and servicing of electrical equipment
• Perform a wide variety of general work such as painting, carry equipment, cleaning etc
• Work closely with other staff to meet the project schedule
• Other ad-hoc duties as assigned

Requirements:

• At least 2 years of working experience in related field
• Strong technical knowledge and hands-on experience
• Pro-active and good working attitude
• Team player
• Able to work on weekend/Public Holidays should the need arise
• Able to work irregular hours should the need arise

Company Overview / Employee Value Proposition

Infinergy Systems specialized in the research and development of Cloud-Web-Mobile-Apps-IoTs solutions and strives to provide the needed expertise and service along with the product delivery in the most cost effective mean. Our mission is to innovate and develop user-centric technologies to empower facility maintainers and management professionals with all the strategic and actionable business intelligence for achieving greater efficiency in a sustainable build environment.

Job Summary

Work as a member of the Technical Service Team, responsible in logistics & preparation, delivery, installation, test and commissioning of IoTs sensors, digital displays and related hardware.

Responsibilities

• Conduct onsite surveys to assess project requirements and prepare for hardware installation
• Configure and install IoTs devices including sensors, tablets, and digital displays according to project specifications
• Perform testing and commissioning of IoTs hardware to ensure proper functionality before delivery
• Provide onsite technical support and troubleshoot issues related to IoTs devices promptly and effectively
• Pre-test and prepare IoTs devices prior to delivery, ensuring all technical and hardware documentation is accurate and updated timely
• Respond to support tickets and collaborate with internal teams to resolve technical support requests efficiently
• Participate in continuous learning and training to stay updated with the latest advancements in IoTs technologies

Required competencies and certifications

• Hold a GCE 'N' or 'O' Level, NTEC, or professional training Diploma in a related discipline
• Possess a Class 2/3 driving license or have own transportation to support onsite visits

Preferred competencies and qualifications

• Demonstrate familiarity with Android and iOS operating systems to support device configuration and troubleshooting
• Show proficiency in Microsoft® Office applications to manage documentation and communication
• Exhibit strong attention to detail and a customer service attitude to ensure quality support and client satisfaction
• Display adaptability and willingness to learn new technologies and tools to keep pace with evolving IoTs solutions
• Fresh applicants with strong passion in smart technology are welcome to apply; training will be provided

Overview

Element has an opportunity for a Chemistry Technician for testing, sample preparation and delivery/collection of samples and preparation of test reports.

Responsibilities

• Analysis of water-physical, chemical and microbiological parameters
  
• Analysis of ores and minerals
  
• Analysis of water, soil, aggregates, concrete and scale samples
  
• Operation of equipment like pH / EC / TDS meters, UV-visible spectrophotometers, ovens, furnaces, incubators, fusion machines
  
• Prepare the reagents, standard solution and ensure standardisation of the solution used in the laboratory
  
• Handling and storage all chemicals as per the Material Safety Data Sheet (MSDS)
  
• Managing the calibration of glass wares and the instruments
  
• Performance of qualitative and quantitative laboratory tests and analysis of other substances as per standard method
  
• Issue reports and receive samples to and from the respective entities
  
• Involvement in site and field testing with various international standards or in-house procedures
  
• Ensure work compliance to ISO 17025 requirements
  
• Coordinating with the other technicians in the team to carry out work as per the planning schedule
  
• Manual handling of samples
  
• General maintenance, cleaning and checking of equipment
  
• Working to all HSE standards
  
• Interaction with clients during witnessed testing
  
• Generating test reports for clients (data entry, quality assurance)
  
• Ensuring compliance to all Element Material Technology quality standards
  
• Driving to customer site to collect samples and / or conduct testing at their lab on a regular / daily basis
  
• Willing to assist in other activities from time to time that may be requested by the department manager to assist in the execution of Element Material Technology annual targets and budget
  

Skills / Qualifications

• Have a diploma / degree in chemistry with at least 2 years experience in similar role
  
• Have the ability to work in teams under pressure and flexible to work different working hours (night / day) shifts if required or necessary
  
• Good English communication skills: reading, writing, speaking
  
• Good maths skills
  
• Knowledge and experience of safe operation of testing equipment and operating in an independent / chemistry / consultant laboratory

The Trainee Technician program aims to equip you with the skills and knowledge to become an Aircraft Engine Technician. This trainee program spans 12 months and includes both structured and on-the-job training. Upon completion, trainees will be deployed as Aircraft Engine Technicians to perform Maintenance, Repair, and Overhaul (MRO) of engines.

Good performing trainees will be assigned to one of three core departments (Engine Build & Strip, Inspection, or Repair Operations) and may progress to become Certifying Technicians or explore other exciting career opportunities within Pratt & Whitney.

What You Will Do

• Utilize machines, equipment, tools to carry out disassembly, assembly, inspection and repair functions of engines, its associated modules, parts, components, or accessories. 
• Read and execute the standard operating procedures (SOP). 
• Solve technical issues and problems as appropriate when encounter in their daily work. 
• Assist the Cell Leaders, Assistant Foremen, Workshop Engineers in their daily operations to achieve production targets, corporate goals, and discipline. 
• Carry out SAP transactions and make necessary changes to works order in SAP. 
• Carry out proper documentation. 
• Actively support and participate in EHS and Continuous Improvement and Ethics culture projects and any other corporate initiatives. 
• Carry out any other duties as assigned. 

Qualifications You Must Have

• Diploma/Higher NITEC/NITEC in Mechanical, Precision Engineering or other Engineering disciplines. 
• 0-2 years of experience with keen interest in joining the aerospace industry are welcome. 
• Able to read and interpret basic technical drawing. 
• A curious and learning mindset – we provide on-the-job trainings and certifications. 
• Good working knowledge of MS Office applications. 
• Commit to work on rotating shifts (Day & Night) and overtime on need basis.

What We Offer

• Career and skills development opportunities.
• Employee scholarship program for further education.
• Comprehensive health, medical and dental benefits.
• On-the-job training and in-house/external certifications.
• Competitive renumeration package.
• Allowance and overtime benefits where appliable.
• Company transport provided.

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends