Total 5,579 job vacancies in Singapore

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

ey Responsibilities

• Provide assistance to QA Manager and Engineer in daily inspection duties
• Supervise inspectors and coordinate the inspection and testing activities
• Keep inspection records and carry out the instrument and tester general maintenance
• Report any nonconformity
• Check inspectors' output and testing results
• Any ad hoc tasks assigned by QA Manager

Requirements

• O Level Above
• At least one year of relevant experience in quality control
• Good analytical skills with strong attention to detail
• Able to work independently and as part of a team
• Familiarity with QC tools and testing equipment is an advantage

Benefits:

• 5-day work week

• Uniform and lunch provided

• Attendance allowance

• Transport allowance

Qualification:

• Candidate must possess at least a Professional Certificate / NITEC in Engineering (Electrical / Electronic) or equivalent.

• At least 1 year of working experience in the related field is required for this position.

• Preferably an Executive specialized in Electrical Engineering or equivalent.

• Singaporeans and Permanent Residents ONLY.

Responsibilities:

• Repair production machines.

• Perform upkeep and routine maintenance of production machines.

• Handle any ad-hoc duties assigned by the Manager.

Benefits:

• 5-day work week

• Uniform and lunch provided

• Attendance allowance

• Transport allowance

Job Description & Requirements

Job Responsibilities

· Driving of prime mover and transport containers / loose cargoes (PSA terminals / Jurong Port / Yards) in a safe manner.

· Perform daily checklist to ensure vehicle is in a good condition for safe operating.

· Adhere to all relevant authorities’ regulations and safety requirements.

Job Requirement

· Possess a valid Class 4 driving licence.

· Able to work 6 days with scheduled OFF day per week.

· Able to communicate in simple english.

· Must be physically fit for the job.

Job Rewards and Other Information

· Monthly gross income $3500 - $6500

Interested candidates may also contact Dennis Koh @ 91085326.

Company Overview

S. K. ROSENBAUER PTE. LTD. manufactures fire fighting and rescue trucksfor domestic and export markets, delivering specialized heavy vehicle solutionswith a focus on quality and safety.

Job Summary

Lead production and purchasing teams to ensure timely fabrication anddelivery of projects. Manage staff recruitment, coordinate with subcontractors,and oversee plant operations while maintaining safety standards.

Responsibilities

• Lead the purchasing team to raise and process purchase requisitions aligned with project requirements
• Plan production schedules and manage production teams to ensure smooth fabrication and on-time project delivery
• Conduct interviews and manage recruitment for production staff to build a skilled workforce
• Coordinate with subcontractors to place orders that meet project specifications and timelines
• Facilitate production meetings with foremen and staff to align cross-departmental activities and resolve issues
• Oversee plant and equipment management to maintain operational efficiency and safety
• Implement and monitor production safety practices in compliance with bizSAFE Level 3 standards
• Apply project management skills to drive production progress and meet delivery deadlines
• Analyze production challenges and apply problem-solving techniques to optimize workflow
• Manage diverse, multi-ethnic teams to foster collaboration and high performance

Preferred competencies and qualifications

• Interest in the heavy vehicle industry, with automotive experience preferred
• Additional proficiency in Cantonese, Mandarin, or Malay (written and spoken) to enhance communication

Other Information

Fluency in English (written and spoken) is required.

Company Overview

• Perfect Team Engineering Pte Ltd, established in 1998, provides machining services to major O&G OEMs. The company is committed to quality, innovation, safety, and ethics, certified to ISO 9001: 2008 and WSH bizSAFE level 3.

Job Summary

You will deliver and collect goods on schedule, maintain vehicle cleanliness and condition, and plan routes to ensure efficient operations.

Responsibilities

• Deliver and collect goods according to management schedules to ensure timely operations
• Maintain vehicle cleanliness and inspect vehicle conditions to ensure safety and reliability
• Plan and prepare routes in advance to optimize delivery flow and readiness for subsequent deployments

Required competencies and certifications

• Hold a valid Singapore Class 3 driving license

Preferred competencies and qualifications

• Possessing a forklift license is an added advantage
• Have at least 2 years of relevant driving or delivery experience

Partner with the best

Baker Hughes stands as a leading global energy‑technology company, delivering innovative solutions that make energy safer, cleaner, and more efficient across the entire value chain. Operating in more than 120 countries, the company blends deep industrial expertise with advanced engineering and digital technologies to support energy production, transformation, and decarbonization. With over a century of heritage, Baker Hughes partners with customers in oil and gas, industrial sectors, and emerging energy markets to accelerate progress toward a more sustainable energy future

Fuel your passion

The Manufacturing Professional – Production Planning & Scheduling role supports seamless manufacturing operations by coordinating and expediting the flow of materials across suppliers and internal departments in alignment with production schedules. This role drives efficient planning and scheduling of material and production requirements, ensuring timely execution and operational continuity. By evaluating and communicating the impact of changes in products and processes, the professional enables informed decision-making and strengthens collaboration within the manufacturing organization to enhance overall performance and efficiency.

As a Manufacturing Professional – Production Planning & Scheduling, you will:

• Drive master planning, material processes, and system efficiency by preparing and maintaining accurate production schedules and purchasing plans. Ensure strong alignment with production targets and KPIs while continuously optimizing inventory levels and improving processes.
• Collaborate cross-functionally by exchanging critical data and insights with teams such as sales, engineering, and maintenance to support smooth and efficient operations.
• Oversee and support standardized manufacturing processes, following established guidelines for production while managing simple operational workflows that require minimal technical complexity

To be successful in this role, you will have:

• Have a Bachelor’s degree from an accredited university or college.
• Have 2+ years of experience in data mining and analytics using tools like Power BI and Excel Macros.
• Have strong communication and stakeholder engagement skills.
• Have the ability to work independently and manage priorities.
• Have strong problem-solving and critical thinking skills.
• Have an awareness of HSE (Health, Safety & Environment) requirements and ability to follow all safety policies and procedures

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

We are looking for an efficient and committed Manager to join our office. As a Manager, you will be managing the day to day activities. You will be responsible for arranging meetings for the staff, provide them necessary official documents and keep a record of the appointments within the office. You will be also arranging monthly repairs and renovations.

You will also be organizing office operations and procedures. You should be highly dedicated to work and have exceptional organizational skills. If you are ready to take up Manager duties and responsibilities, then apply right away. We will love to meet you.

Responsibilities of a Manager

• Work with Human Resources staff to recruit, interview, select, hire, and employ an appropriate number of employees.

• Provide oversight and direction to the employees in the operating unit in accordance with the organization's policies and procedures.

• Health and safety of the workforce.

• Carrying out and attaining the mission and the goals of the business unit managed.

• Development of a superior workforce.

• Development of the department.

• Development of an employee-oriented company culture that emphasizes quality, continuous improvement, key employee retention and development, and high performance.

• Personal ongoing self-development and personal growth as an employee.

• Coach, mentor, and develop staff, including overseeing new employee on boarding and providing career development planning and opportunities.

• Empower employees to take responsibility for their jobs and goals. Delegate responsibility and expect accountability and regular feedback.

• Consciously create a workplace culture that is consistent with the overall organization's and that emphasizes the identified mission, vision, guiding principles, and values of the organization.

• Lead employees using a performance management and development process that provides an overall context and framework to encourage employee contribution and includes goal setting, feedback, and performance development planning.

• Lead employees to meet the organization's expectations for productivity, quality, continuous improvement, and goal accomplishment.

• Provide effective performance feedback through employee recognition, rewards, and disciplinary action, with the assistance of Human Resources, when necessary.

• Maintain employee work schedules including assignments, job rotation, training, vacations, and paid time off, telecommuting, cover for absenteeism, and overtime scheduling.

• Maintain transparent communication. Appropriately communicate organization information through department meetings, one-on-one meetings, and appropriate email, IM (Instant Messaging), and regular interpersonal communication..

• Plan and implement systems that perform the work and fulfill the mission and the goals of the department efficiently and effectively.

• Plan and allocate resources to effectively staff and accomplish the work to meet departmental productivity and quality goals.

• Plan, evaluate, and improve the efficiency of business processes and procedures to enhance speed, quality, efficiency, and output.

• Manage the preparation and maintenance of reports necessary to carry out the functions of the department. Prepares periodic reports for management, as necessary or requested, to track strategic goal accomplishment.

• Communicate regularly with other managers, the director, vice president, president, and other designated contacts within the organization.

• Perform other duties and responsibilities, as assigned.

Manager Job Requirements

• Knowledge and experience in business, supervision, and management.

• Knowledge of the functions, operation, and mission of the specific department.

• Better than average written and spoken communication skills.

• Outstanding interpersonal relationship building and employee coaching and development skills.

• Management experience in a team-oriented workplace preferred.

• Demonstrated ability to lead and develop a department and department staff members.

• Demonstrated knowledge of basic economics, budgeting, and accounting principles and practices.

• Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.

• Excellent computer skills in a Microsoft Windows environment. Must include knowledge of Excel and skills in Access..

• Evidence of the ability to practice a high level of confidentiality.

• Excellent organizational management skills.

Roles& Responsibilities

• Design lead for assigned projects related to Architectural scopes of work
• Work closely with project and sales team to provide concepts and shop-drawings development
• Interprets technical specifications against design requirements
• Creates and maintains design documentation to support the engineering lifecycle.
• Applies relevant design principles and tools to contribute to project goals.
• Manages design resources and workflows to meet project timelines and quality expectations.

REQUIREMENTS

• Creative and Independent on job
• Strong in English Communication in both verbal and written
• Strong proficiency in AutoCAD
• Ability to visualize and sketch design concepts
• At least 2 years of working experience in construction preferred.
• Knowledge in building codes/structural design is an advantage

Job Scope

· Supervise projects onsite ensuring work adhere to safety regulations, work schedule and progress and quality.

· Monitoring and reporting of work progress.

· Able to coordinate with workers and other Contractors on site.

· Ability to resolve technical and engineering problems.

· Providing technical advice and suggestions for improvement on projects.

· Excellent at reading and understanding construction detail, plan and elevation drawings

· Ensure all project documentation (progress reports, progress claims, daily reports, site diary, QA/QC report etc.) are submitted and follow up to ensure collection of approved documents in a timely manner.

· Any Ad-hoc duties assigned.

Job Requirements

· Candidate must possess Bachelor's degree in Civil Engineering / Mechanical Engineering

· Candidate to possess relevant certificates and Building Construction Supervisor Safety Course Certificates is an advantage.

· Good communication, self –initiative and interpersonal skill.

· Fresh Engineers are welcomed to apply.

· Candidates with experience will be considered for senior role.

Kindly indicate the following information in your CV.

· Current / Last Drawn Salary (in SGD)

· Expected Salary (in SGD)

· Availability

· Residency Status in Singapore

A Sales Supervisor plays a critical role in supporting the success of an organization. They are the leader in coordinating the day-to-day activities of the sales representatives and ensuring that they are meeting their goals. The sales supervisor must work closely with the store manager, general manager, and production manager to communicate changing customer needs. As a liaison between the organization and the customers, the production supervisor must anticipate changing customer needs and design products that meet such needs.

Sales Supervisor Job Responsibilities

• Supervise the activities of the sales team including marketing activities like product activations.

• Assist the line manager to recruit, training, enumerating, and retaining a competent sales team.

• Provide reports to top management like sales reports, lead generation reports, customer complaints reports, and new customers’ on-boarded reports.

• Prepare sales presentations and other sales tools.

• Assist the line managers to ensure adequate client communication, maintain contacts with clients and provide feedback.

• Initiate sales activities, strategies, and sales plans required to build brand visibility.

• Serve as a point of reference to employees in terms of showing great work ethic, habits, personal character, and professional character.

• Develop and maintain accurate records of prospects, leads, pricing, sales activities, and active clients.

• Controlling company marketing expenses to ensure the marketing expenditure is kept within budget.

• Attend trade shows and other marketing events and represent the organization.

• Evaluate the performance of the sales team and seek ways to improve the team’s performance.

• Identify the trends in the market, both current, and future that are likely to affect the performance of the organization.

• Ensure the items are displayed correctly in the malls, supermarkets, and other sales points.

Sales Supervisor Skills/Abilities/Knowledge

• Bachelor’s degree in a business-related course with emphasis on marketing.

• Proven work experience in marketing and achieving set targets.

• Excellent communication skills, both written and verbal communication.

• Ability to lead and motivate a sales team, and put in place measures to retain a great team.

• Excellent selling skills, ability to close deals, and deal with post-purchase anxiety.

• Excellent selling skills, people-oriented, and ability to motivate a team.

• Ability to identify potential areas of growth and identify new business partnership opportunities.

• Strong organization skills and multi-tasking skills.

• The ability to work under pressure.

• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description & Requirements

· Preparing inspection testing plan for all welding activities

·Conducting material inspection and material traceability

·Prepare, review of Welding Procedure Specifications (WPS) based on ASME and EN Standards ·Conduct a welding procedure and welder qualification tests

·Coordinate with client inspector for site & workshop inspection activities for piping, structural and equipment like heat exchangers pressure vessel, column

·Review the calibration status and keep a calibration log of test equipment

·Verify in process inspection, final inspection and welding

·Carry out Welding control and inspection . .

·Record result of inspections and maintain records of specific items as per client specifications ·Raise RFI request to Client and 3rd party and coordinate for inspection as identified ITP hold points

·Reviewing incoming material with Mill test certificates, Dimensional check and physical condition check

·Checking and verifying of receiving materials (pipes, flanges, fitting, Valves & Equipment, etc.,,) as per MTO, ensure that materials are correct according to the specification and description upon received

·Conduct inspection during all phases of fabrication, prior welding, during welding and after welding preparing Daily Welding Reports (DWR)

·Witnessing nondestructive testing (NDT) activities to follow up and confirm repairs, re-testing and re-inspection in accordance with specifications

·Witnessing post weld heat treatment (PWHT), Heating method & temperature record system ·Witnessing positive material identification (PMI), verify that all PMI of material has been performed as per specification

·Reviewing of RT, UT, MT, PT, PMI, PWHT & Hardness Test Reports

·Preparing welding surveillance report as per client requirement

·Prepare the of weld & NDT summary

·Completing/Endorsing all inspection records from initial inspection to final acceptance of weld joints

·Coordination with Client/its Representative /Third party inspector/ Suppliers for inspection requirements of the project

·Review hydro-test procedure and preparing hydro-test packages and spool release & Weld History documents

·Ensure that calibration certificate of test instruments such as pressure gauge, relief valve, manifold, pressure and temperature recorder prior to hydro test

·Ensure that the correct rating gaskets are installed

·Ensure that the A- punch list items Shall be closed before hydro test

·Witnessing & visual Inspection of pipeline internal cleaning /gauging

·Witnessing valve Hydro test in different ratings

·Witnessing valve installation, spool installation and bolt tightening

·Witnessing of pneumatic test, hydro-test, flushing

· Line check before commissioning activities and assist in Punch list preparation and punch list items closing

·Coordination with construction Team for Re-Instatement activities

·Preparing and maintaining QA/QC documents and final test packages for system lay-up.
. Coordinate with project managers, engineers, construction teams, and client representatives.

OCTG Test & Development Engineer

Key Responsibilities:

• Working in development & testing projects under general supervision
• Peform analysis, modification and design of products and services for assigned projects which requires working knowledge of materials, components and their applications.
• Responsible for independent design, modification & analysis of connection technology related products
• Develops test procedures, conduct tests and completes test result analysis for assigned projects.
• Assists in planning and conducting tests on materials, components, subassemblies, and tools. Acquires working knowledge of test procedures and techniques with new Standards.
• Create / Modify / update the design as needed and process the engineering change request within defined time limits.
• Produce Manufacturing drawing which includes complex machining and assembly of test fixtures and perform drawing checks and sign off on work.
• Oversee Product testing, hold design and test reviews and write reports.
• Coordinate and with global teams on development & testing related activities.

Skills and Experience:

• At least 2 Years of product development and testing experience in Oil & Gas industry
• Understanding of thread and its calculations
• Experience in Finite Element Analysis (FEA)
• Experience in Solidworks tools

Qualifications:

Possess a Bachelor’s Degree in Mechanical Engineering or equivalent.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Salary: $3,500
Work Location: West (Company transport provided from Jurong East MRT)
Work Days: 5 Days
Industry: Automotive Components

Responsibilities:
• Manage customer purchase orders and forecast for SG & Regional offices.
• Handle daily correspondence with internal teams and customers.
• Monitor customer forecasts and support monthly order processing.
• Coordinate inquiries with overseas offices and prepare internal purchase requests.
• Follow up on lead times and order confirmations.
• Liaise with the shipping team on shipment arrangements and documentation. 

Requirements:
• Diploma in Engineering preferred
• 2 to 3 years of relevant sales or order processing experience
• Proficient in Microsoft Office
• Singaporean only need apply

Please submit your resume in MS Word format to sunnie@united-personnel.com

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#02-75 WCEGA Tower
Singapore 658065
Tel: +65 65651939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. Weregret that only shortlisted candidates would be notified)

Job Summary

The Construction Supervisor are tasked with a variety of duties that are crucial for the smooth execution of construction projects:

Responsibilities

• Overseeing and directing construction projects from conception to completion, reviewing the project in-depth to schedule deliverables and estimate costs.
• Coordinating and supervising construction workers, selecting tools and materials, and negotiating with vendors and suppliers to ensure the best rates.
• Ensuring adherence to all health and safety standards on-site and reporting any concerns or violations immediately.
• Interpreting and explaining contracts and technical information to other professionals and providing detailed updates to project stakeholders on construction progress and stretegies.
• Organizing the logistics of construction materials and ensuring that equipment is maintained and handled according to safety standards.
• Resolving delays and other problems that may arise due to emergencies or unforeseen issues impacting project timelines.

Required competencies and certifications

• Degree or Diploma in Engineering, Construction Management, or a related discipline
• Minimum 5 years’ experience working with Land Transport Authority (LTA) projects
• Electrical knowledge specialization relevant to construction supervision

Preferred competencies and qualifications

• Strong coordination skills demonstrated by managing teams and resources effectively
• Effective communication skills for stakeholder engagement and team leadership
• Problem-solving skills applied to address construction challenges and unforeseen issues

• Attend to enquiries.
• Prepare billing to customers.
• Coordinate with operations team on store movement, inventory control and logistics·
• Handlings other duties as assigned by management

Company’s Profile:

Our client is a leading public healthcare institution that provides seamless, team-based care across all stages of a patient’s health journey. Serving a diverse community, they are committed to innovation, collaboration, and using technology to deliver person-centered, holistic care. Awarded as one of the Best Employers in 2025, they are looking for qualified individuals to join their dynamic environment dedicated to improving lives within the community.

Work Location: West side polyclinics

Job Responsibilities:

• Provide fast, skillful and accurate blood collection for patients using venipuncture, capillary and heel-prick
• Perform phlebotomy, ECG, spirometry in an accurate, efficient and professional way
• Ensure compliance with infection control guidelines
• Ensure 2 identifier is performed for every patient prior to collection before performing test for patients
• Ensure proper documentation for traceability and in adherence to good documentation practices
• Ensure compliance to workplace safety, hand hygiene and other applicable regulatory and accreditation requirements of the laboratory

Requirements:

• At least 2 – 3 years’ experience with phlebotomy
• Open to travelling around west side polyclinics when necessary
• Any educational qualification in healthcare / Phlebotomy Certificate

Interested candidates may whatsapp your resume to 8977 7062. Only shortlisted applicants will be contacted.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Cassie Chan | R2197426

EnviroDynamics Solutions Pte Ltd | EA No: 12C6285

1. Manage daily Import / Export operation & Prepare shipping documents for FCL and LCL and Air shipment.
2. Prepare Booking Confirmation, Bill of Ladings, Delivery Order, permits.
3. Issue invoices and helping customers with enquires.
4. Ensuring compliance on import and export matters (DG declaration, permits, trucking arrangement etc.)
5. Working closely with customer and follow up bookings
6. Other ad-hoc duties as assigned by the supervisor

Job Summary

The ideal candidate will lead Topsides Process Engineering for FPSO, FLNG, or offshore projects, providing strategic focus across Conceptual, pre-FEED, FEED, and EPC(I) phases with hands-on engineering expertise and leadership in offshore oil and gas.

Responsibilities

• Lead development and continuous improvement of corporate technical standards, procedures, workflows, and engineering platforms to ensure practical, fit-for-purpose solutions incorporating project lessons learned
• Manage topside process engineering resources by monitoring project progress and assigning competent personnel aligned with project needs in close collaboration with Project Management Teams
• Maintain and disseminate the Lessons Learned database for project execution and operations to enable preventive and mitigative actions and promote design standardization
• Serve as Project Discipline Lead for Topsides Process, applying hands-on engineering expertise to guide project execution and technical decisions
• Report regularly to Head of Process Discipline on project concerns, resource planning, progress updates, and forecasts, participating in corporate meetings
• Provide technical guidance and career development opportunities for engineers and designers, facilitating access to international conferences and training
• Support Hanwha Ocean engineering teams across global locations including India, Seoul, and Houston for offshore project phases from Conceptual to FEED
• Travel internationally as required to support project and team needs

Required competencies and certifications

• Bachelor’s or Master’s degree in Petroleum or Chemical Engineering
• Proven hands-on process engineering experience in FPSO or offshore EPCI projects, including process simulation (steady state, dynamic), HB/MB, utility consumption, blowdown/flarenet studies, hydraulic and equipment sizing, control narrative, HAZOP, and technical safety action close-out
• Experience leading FPSO FEED/EPCI projects as Project Lead for Topsides Process, covering Conceptual and Feasibility Studies
• Experience managing topside process engineering resources and project progress in offshore or onshore oil and gas industry projects
• Proficiency with process engineering tools such as Aspen HYSYS, Flarenet, Pipe-net, or equivalents, with ability to interpret simulation results
• Extensive knowledge of process engineering principles, industry codes, standards, and scientific problem-solving methods
• Strong analytical and problem-solving skills applied to engineering challenges
• Effective communication skills in English, both oral and written, to collaborate with multidisciplinary teams, vendors, and clients
• Ability to work independently and collaboratively with strong attention to detail and accuracy

Preferred competencies and qualifications

• Experience in Field Engineering during construction or onshore/offshore commissioning phases
• Familiarity with zero carbon emission technologies and CCUS (Carbon Capture, Utilization, and Storage) technologies

COMPANY DESCRIPTION

YTL PowerSeraya Pte. Limited, a wholly owned subsidiary of YTL Power International Berhad, is in the business of producing, wholesaling, trading and retailing of energy; with a primary focus on electricity. As an established player in Singapore's energy sector, it supplies the country's energy needs through its multi-utilities platform. With a licensed generation capacity of 3,100 MW*, it is one of Singapore's largest electricity generators.

The YTL PowerSeraya Group has three subsidiaries: the retail arm under the Geneco brand provides electricity price plans and energy solutions to homes and businesses, PetroSeraya is the fuel management arm of the Group, and Taser Power which operates Taser Power Plant.

Besides being a Plaque of Commendation (GOLD) awardee at the National Trade Union Congress's May Day Awards 2023, YTL PowerSeraya has adopted three Tripartite Standards under the Tripartite Alliance for Fair and Progressive Employment Practices, and has committed to be a fair and progressive employer. To find out more about the organisation, please visit ytlpowerseraya.com.

*As at 30 Oct 2024, our registered generating capacity with EMA is 2,467.7 MW.

RESPONSIBILITIES

• Attend to work orders allocated by Maintenance Engineers.

• Analyse process parameters, alarms and information / drawings to diagnose and trouble shoot equipment problems.

• Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently.

• Perform unit functional test for re-commissioning of overhaul units.

• Lead in the repair or replacement defective or malfunctioning components of machinery and equipment.

• Assess spare part requirements and raise purchases, record parts and materials used and review tender quotations.

• Coordinate logistic arrangement for all maintenance activities.

• Maintain a safe and orderly work area by practicing organised housekeeping.

• Preparation of weekly activity reports.

• Perform other duties as assigned by supervisors.

• Nitec / Diploma in Electrical / Electronics Engineering or equivalent.

• Preferably possesses 3 years' experience in Engineering or related field.

• Self-driven, with good working attitude and a good team player.

• Have a safety mindset and display good workplace safety behavior.

• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Responsibilities:

• Attend to inbound calls and provides customer service to the public:
• Responds to customer inquiries; provides information regarding products specification, selling price, and/or other Sales matters.
• Receives and processes order requests.
• Coordinate with respective departments to ensure delivery completion
• Making outbound calls to solicit Sales orders.
• Assists customers requesting documentations.
• Receives and processes order requests including new customers and inactive customers.
• Conducts a variety of routine clerical tasks including data entry and copying, filing, and faxing documentation.
• Miscellaneous tasks.

Requirements:

• GCE 'O' Level/ITE Certificate or equivalent with minimum 1-year Customer Service/Telemarketing experience;
• Proven customer support experience;
• Able to work on weekends and Public Holidays on rotating shifts;
• Preferably with experience in Retails or F&B industries;
• Team player with positive work attitude;
• Highly independent and organized;
• Team player with positive work attitude;
• Ability to multi-task, prioritize and manage time effectively;
• Takes pride in providing excellent customer service;
• Excellent communication skills and telephone etiquette;
• Customer orientation and ability to adapt/respond to different types of characters;
• Tech savvy, proficient in computer skills; Microsoft Office.

Job Description

• Assist in checking of personal hygiene of all the staff, hygiene of chillers & freezers.
• File weekly records for hygiene check lists & photos.
• Help out in packet meals packing.
• Print out daily preparation lists for cooking.
• Maintain a comprehensive filing system.
• Compile and submit petty cash vouchers, suppliers’ invoices, workers’ medical certificate/ leave forms etc. to main office.
• Assist is receiving & checking on incoming goods & deliveries.
• Ad-hocduties as assigned.

Requirements

• Minimum ‘O’ Level.
• Ability to communicate with suppliers & vendors.
• Possess good knowledge of Microsoft Office.
• Must be a fast learner.
• Good in self-discipline, able to work in accordance to instructions.
• Fast and meticulous.
• Able to work on weekends & public holidays.
• Willing to work long hours especially during festive seasons.

COMPANY DESCRIPTION

YTL PowerSeraya Pte. Limited, a wholly owned subsidiary of YTL Power International Berhad, is in the business of producing, wholesaling, trading and retailing of energy; with a primary focus on electricity. As an established player in Singapore's energy sector, it supplies the country's energy needs through its multi-utilities platform. With a licensed generation capacity of 3,100 MW*, it is one of Singapore's largest electricity generators.

The YTL PowerSeraya Group has three subsidiaries: the retail arm under the Geneco brand provides electricity price plans and energy solutions to homes and businesses, PetroSeraya is the fuel management arm of the Group, and Taser Power which operates Taser Power Plant.

Besides being a Plaque of Commendation (GOLD) awardee at the National Trade Union Congress's May Day Awards 2023, YTL PowerSeraya has adopted three Tripartite Standards under the Tripartite Alliance for Fair and Progressive Employment Practices, and has committed to be a fair and progressive employer. To find out more about the organisation, please visit ytlpowerseraya.com.

*As at 30 Oct 2024, our registered generating capacity with EMA is 2,467.7 MW.

RESPONSIBILITIES

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.

• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.

• Plan and ensure safe and timely execution of plant overhaul activities.

• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.

• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.

• Lead and manage a team of technical officers and technicians.

• Development of staff.

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.

• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.

• Driven self-starter with strong work ethics.

• Team player with strong analytical, technology and communication skills.

• Is available on standby after office hours for emergency calls.

• Knowledge in cyber security will be advantageous.

• Have a safety mindset and display good workplace safety behaviour.

• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.