Total 5,579 job vacancies in Singapore

Job Description & Requirements

• Able to take off quantities efficiently
• Able to liaise and negotiate with suppliers & contractors related toprojects
• Prepare quotations, cost estimates and bills of quantities
• To keep track of Variation Orders
• Certification of progress claims from sub-contractors
• Keep track of final account and variation orders
• Prepare contract administration for client, consultants, sub- contractor
• Able to assist estimation, cost planning and forecast budgeting.
• Preparation of Monthly Progress Claim to Client and Sub-Contractors
• Preparation for Payment Response to sub- contractor and suppliers and keeping trace ofresponse.
• Preparation of technical details and costing for tender submission.
• Sourcing of materials and obtaining quotations for evaluation.
• Carry out other Contracts administration activities.
• Other quantity surveying related duties as assigned
• Preparation of technical details and costing for tender submission.
• Sourcing of materials and obtaining quotations for evaluation.
• Carry out other Contracts administration activities.
• Other quantity surveying related duties as assigned

Requirement

• Diploma, or Degree in QS/ Building orequivalent

• Minimum 5 years (QS) / 10+ years (Senior QS) of relevant experience in the interior fit-out/joinery industry

• Able to work independently with min supervision

• A good team player with the ability to meet deadlines.

• Positive work attitude, seek continuous improvement

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Results-oriented and adaptable to changes
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Results-oriented and adaptable to changes

Job Description

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with
• Python for prototyping, demo, verification and/or automation
• OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.
3. Experienced in fixed point computing implementation strategies, such as quantization, scaling, saturation and overflow handling.
4. Design, implement, and maintain high-quality C/C++ functional & bit-Accurate Model for NPU operation simulation

Description:

• Lead applied research and strategic definition of machine learning algorithms, quantization methodologies, and toolchain capabilities for the Neural Network Development Kit (NDK) roadmap targeting next-generation Edge AI compute solutions
• Drive innovation at the intersection of ML algorithms and constrained hardware environments, identifying and validating the latest Edge AI technologies applicable to product requirements
• Serve as the primary technical interface between the AI Architecture team and the Software (Edge AI) team, delivering well-researched toolchain feature proposals and algorithmic specifications for implementation
• Collaborate with Software (Edge AI) and AI Architecture teams to identify and pursue targeted improvements in ML software methodology, and support Software-initiated improvement efforts with algorithmic insight and implementation guidance
• Maintain deep engagement with the global Edge AI research community to ensure the NDK roadmap reflects the state of the art in model efficiency, compression, and on-device learning

Key Responsibilities:

• Collaborate with the Sr. Design Manager (AI Architect) to define and maintain the NDK toolchain feature roadmap, ensuring alignment with the NPU hardware roadmap and overall AI product strategy
• Research, evaluate, and recommend quantization algorithms, pruning strategies, knowledge distillation techniques, and other model compression methodologies suited to constrained hardware targets
• Assemble and lead focused task forces drawing on partial bandwidth from the Software (Edge AI) and IC Design teams to prototype, benchmark, and validate proposed toolchain concepts before broader commitment
• Prototype and benchmark candidate ML algorithms and toolchain features to quantitatively demonstrate accuracy-performance trade-offs and justify roadmap prioritization

• Translate hardware architectural capabilities and constraints (as defined by the NPU Architect) into concrete toolchain feature requirements and algorithmic optimization opportunities
• Deliver comprehensive technical specifications and algorithmic documentation to the Software (Edge AI) team to enable confident and accurate implementation of NDK features
• Collaborate closely with the Software (Edge AI) team throughout the implementation phase to resolve algorithmic questions, validate correctness of implementations, and ensure performance targets are met
• Actively monitor and synthesize developments from the Edge AI research community — including publications, open-source frameworks, and industry benchmarks — to continuously inform and refresh the NDK roadmap
• Partner with the Software (Edge AI) team to jointly identify ML toolchain methodology improvement opportunities and drive those that originate from the AI Architecture team; provide expert advisory support for methodology improvements initiated by the Software team
• Evaluate and apply a range of productivity tools and techniques — including but not limited to AI-assisted methods — to accelerate algorithmic prototyping, benchmarking, and specification productivity
• Evaluate and integrate relevant open-source ML frameworks, runtimes, and toolchain components (e.g., MLIR, TVM, ONNX Runtime) as acceleration vectors for NDK development

Requirements:

• Bachelor's or Master's degree in Computer Science, Electrical Engineering, Computer Engineering, or related technical field; PhD preferred, particularly in machine learning, optimization, or computer architecture
• 8+ years of experience in applied machine learning engineering or Edge AI software, with at least 5 years focused on model optimization, ML compilers, or on-device inference toolchain development
• Proven expertise in quantization (PTQ, QAT), pruning, knowledge distillation, and other model compression techniques with demonstrated results on resource-constrained hardware
• Strong knowledge of AI/ML algorithms, neural network architectures (CNNs, RNNs, Transformers, etc.), and the trade-offs between model accuracy, computational complexity, and memory footprint
• Demonstrated ability to stay at the forefront of the Edge AI research community, with a track record of translating academic and industry advances into practical product roadmap contributions
• Hands-on experience with mainstream ML frameworks (PyTorch, TensorFlow/Lite) and familiarity with ML compiler stacks such as MLIR, TVM, or ONNX Runtime
• Experience consuming hardware architectural specifications and translating them into software toolchain requirements and algorithmic optimizations
• Excellent communication skills with ability to present complex research findings and toolchain proposals clearly to architecture, software, and executive audiences
• Strong analytical and problem-solving abilities with emphasis on quantitative benchmarking, accuracy-efficiency trade-off analysis, and performance profiling on target hardware
• Demonstratedability to work collaboratively across team boundaries, including assembling and coordinating cross-functional task forces without direct authority
• Familiarity with RISC-V ISA and its software ecosystem, particularly in the context of AI inference deployment
• Experience with FPGA-based or simulator-based prototyping to validate algorithmic concepts against pre-silicon hardware models (preferred but not required)
• Self-motivated with ability to work independently, lead applied research initiatives, and drive toolchain innovation from algorithmic exploration through specification and successful team handoff

Semicon MNC Hiring | Production Operator (80 Vacancies)

Competitive Salary Package
• Basic Salary: Up to $2,900/month
• Meal Allowance: $10/day (Up to $220/month)
• Overtime Available (Optional)
• Gross Salary: Up to $3,500/month (Including OT)

Benefits
• AWS + Performance Bonus (Up to 3 months)
• Medical Coverage Provided
• Annual Salary Increment

Working Arrangement
• 5-day work week | 8:30am – 5:30pm
• Locations: Pioneer / Yishun
• Company transport provided

Job Scope
• Operate semiconductor production equipment
• Perform wafer testing, inspection and sorting
• Support wafer dicing and die sorting processes
• Handle wafer cassette (up to 10kg)
• Maintain cleanroom standards and 6S compliance

Requirements
• Preferably candidates with Manufacturing / Warehouse / F&B experience
• Must be comfortable working in cleanroom environment (Full PPE required)
• Able to stand for long hours

Transport Coverage
• Pioneer route: Pick-up at Jurong East MRT
• Yishun route: Pick-up at Woodlands MRT / Yishun MRT

For consideration, kindly submit your CV by clicking “APPLY NOW”

Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

R24124448 | Nana Yeoh Li Xuan

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborate with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks as assigned to support project and team objectives

Requirement

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Job Description:

• Track and manage document revisions, ensuring that only the most current versions are in use.
• Coordinate document review cycles, including the collection of feedback and implementation of revisions.
• Ensure compliance with regulatory and company standards for document control and record-keeping.
• Assist in the preparation of QA audit documentation and support internal and external audits.
• Collaborate with QA teams to ensure that all quality documentation supports and aligns with QA policies and procedures.
• Ensure that all QA documents meet regulatory and industry standards.

REQUIREMENTS

• Diploma or equivalent qualification in administration, quality management, or a related field.
• Previous experience in document control, quality assurance, or administrative roles is an advantage.
• Ability to track and manage document revisions accurately.
• Fresh graduate with strong background in related business/engineering discipline will also be considered.

PREFERRED SKILLS:

• Self-motivated
• Good Interpersonal skills
• Teamwork spirit
• Good oral and written communication skills
• Willing to undertake multi-tasking
• Analytical, resourceful and problem-solving capabilities
• Understanding in engineering drawing and documents will be an added advantage
• Proficency with Computer skills (e.g. MS Office)

WE ARE HIRING | Sales & Customer Support Executive (Industrial / Technical Sales)

Highlights

• Shuttle service to office from Admiralty/Kranji/ CCK/ Gul Circle MRT
• Office 10 minutes walk from Gul Circle MRT

Job Description

• Answer, screen, or forward telephone calls; providing information, or taking messages.
• Greet visitors entering establishment, determine nature and purpose of visit, and direct or escort them to specific destinations.
• Facilitate planned events, such as directing caters, logistics arrangements, etc.
• Send information or documents to customers, using e-mails or traditional mailing methods.
• Provide information about the company, such as location of the office, employees within the organization, or services provided.
• Perform administrative support tasks, such as restocking the pantry, photocopying documents, upkeeping of records, etc.
• Collect, sort, distribute, or prepare mail, messages, or courier deliveries.
• Any other ad hoc duties as assigned

Requirements

• At least 1-2 years of relevant experience
• Computer literate and tech savvy
• Experience in planning company events
• Good communication skills and pleasant disposition

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #5 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the college aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

• The appointee is expected to contribute to, support and develop teaching and educational activity at both undergraduate and graduate level.

• The appointee is also expected to participate in academic activities and meet other administrative requirements as appropriate.

Responsibilities:

• Design and deliver high quality courses in FinTech that include both undergraduate and postgraduate levels. Contribute to curriculum development and enhancement to ensure students receive world class teaching education

• Provide academic guidance and mentorship to students, fostering their intellectual and professional growth.

• Contribute to the School and university’s service activities, including committee participation, outreach and engagement with industry partners

• Facilitates and conducts all teaching assignments, both face-to-face and virtual delivery

• Oversee and complete core course administrative tasks or duties such as course evaluation, online course materials, attendance records, academic counselling on student progress

• Conducts assessments, marking and grade entries, feedback to students, student consultations, non-academic matters (e.g., invigilation) etc.

• Develops and updates course materials and learning resources for course delivery and support students' learning

• Provides regular course and student progress statistics for reporting, improvement of students’ learning and strategic decision making

• Demonstrates values and principles of professional conduct in all endeavours

• Conduct impactful research in areas related to FinTech and collaborate with colleagues within the department and across the University

• Any other assigned duties

Requirements:

• Applicants should preferably have industry and/or academic experience, a passion for teaching and preferably a Master's degree or PhD in related field.

• Candidates should demonstrate teaching/mentoring excellence and be able to engage in curriculum development and work closely with students for undergraduate courses

Personal Attributes

Student Focus

• Demonstrates an apparent empathy with students and understands their needs, and is an active listener

• Motivated and enthused to maximise individual student potential

• Proactive with the ability to react positively to unexpected circumstances

• Passionate in educating and mentoring students to guide them in their learning and growth

Teamwork

• Maintains the confidence and mutual respect of colleagues at all levels

• Understands and works towards team objectives

• Shares useful ideas and practices to improve the team’s overall morale and performance

• Initiates and implements improvements to work processes and practices within their responsibility

Credibility and Communication

• Speaks and writes clearly and persuasively when interacting with internal and external stakeholders

• Displays excellent listening and questioning skills

• Projects an appropriate professional image

Organisation

• Able to plan workload but remain flexible

• Meets deadlines and displays strong administrative and organisational skills

• Demonstrates a capability to balance competing demands

• Meticulous with strong organisational and academic, administrative skills

• Strong initiative, self-motivated, and focused on achieving quality outputs

Job Summary

Dashmesh Singapore Pte Ltd is a leading South Asian food distribution company, specialising in Indian and Pakistani dried and packaged food products. We serve regional markets and are committed to delivering quality products and excellent customer service. We are seeking a results-driven and customer-focused Export Assistant Manager / Manager to join our growing team. The successful candidate will play a key role in driving export sales, expanding market presence, and building long-term customer relationships.

Responsibilities

• Lead market development and sales of South Asian dried and packaged food products to regional and overseas customers to increase export revenue
• Acquire and maintain deep product knowledge to effectively communicate product benefits and competitive advantages to customers, enhancing sales conversion
• Identify and pursue new business opportunities by prospecting, networking, responding to trade enquiries, and generating leads to expand market reach
• Manage and nurture relationships with existing customers to maximise sales volume and encourage repeat business
• Develop, implement, and monitor targeted sales strategies to achieve defined sales targets and profitability goals
• Prepare accurate quotations, negotiate pricing terms, and follow up on sales enquiries to close deals efficiently
• Coordinate with internal teams to ensure timely order processing, accurate export documentation, and adherence to delivery schedules
• Monitor market trends, customer demands, and competitor activities to identify and recommend new growth opportunities
• Represent the company at trade shows, customer visits, and overseas business development activities to strengthen market presence
• Prepare and present detailed sales reports and forecasts for management review to support strategic decision-making

Preferred competencies and qualifications

• Possession of Class 2B / Class 3 driving licence
• Experience handling regional export markets and overseas customers
• Familiarity with export procedures and documentation
• At least 2-3 years of sales or export experience, preferably in FMCG or food distribution
• Strong communication, presentation, and interpersonal skills
• Strong negotiation and closing skills
• Self-motivated, proactive, and able to work independently

Other Information

Work Schedule

• Monday to Friday: 8:30 AM – 6:00 PM
• Saturday (Alternate): 8:00 AM - 12:30 PM

All Saturdays will be compensated separately.

Part time intern needed to do on site survey.

must commit minimum 2 to 4 weeks

working hours: 830am to 6pm.

Working days: 5 days per week.

Committement: Not needed

salary: $1200 to 1500 per month

Do not need any experience as we will train you

Kindly whatsapp Jay at 87928898 / wa.me/6587928898

Kindly whatsapp Jay at 87928898 / wa.me/6587928898

Responsibilities

Manage the daily operation of the assigned project in accordance with company's policy

Monitor the performance of the projects, sub-contractors and resolve daily problems arise during and after the course of projects

Communicate, implement, and monitor company's policy to the project team for the effective implementation of the policy

Identify potential construction problems, instigate preventive measures, standardization and innovate technique in related to selective construction process

Review, advise and resolve on contractual, technical matters and comment on sub-contracts in related to the projects

Chair internal project reviews meeting with project team and report on the performance for director's information

Establish, develop, monitor and maintain project budget, programme, resources allocation, quality plan, environmental issues, and safety plan in accordance with company's requirement

Liaison with Client, Architect and consultants for performance and co-ordination of the project

Requirements

Degree in Building, Civil, Structural Engineering or other construction related subject

Minimum 8 years relevant experience with at least 3 years in managerial grade in construction field

Strong management, communication and problem solving skills

Candidate must possess at least Bachelor's Degree in Civil Engineering or construction related major

Able to communicate in English & Chinese (to liaise with Mandrain speaking associates)

Working day: Mon to Saturday (half day)

General, Compliance and Manufacturing Support Responsibilities

• Operation and maintenance of HVAC in GMP and non-GMP areas include Air-Handling-Unit (AHU), cold room, freezer, fridge, Bio Safety Cabinet (BSC), Downflow Booth (DFB), isolators, pass-box, Laminar Air Flow, clean room HEPA, other related chilled water and cooling water pipeline.
• Partner with shift utility personnel to perform daily site walk down, logging, sample collection and analysis.
• Monitor HVAC system performance in BMS and partner with shift utility personnel to respond to alarm.
• Apply technical knowledge and hands-on support to carry out troubleshooting of equipment breakdown or failure relating to HVAC, BMS and non-GMP equipment.
• Report abnormality or emergency issue to line manager or stakeholder. Support to conduct basic frontline troubleshooting / investigation to resolve problem or abnormality.
• Support other engineer or in-line manager to do deviation investigation using Fishbone Ishikawa or 5-why diagram.
• Involve in data gathering and support engineer or in-line manager to create spare parts and consumables in Maximo.
• Support planning and communicating with stakeholders/vendors for the execution of maintenance or project or repair work in compliance with safety and quality requirements.
• Partner with SEM (Calibration, Clean Utilities, Process Engineering, Validation, shift utilities) and project teams for excellent execution of maintenance, projects, or troubleshooting-related work.
• Proactive and able to work with minimal guidance in day-to-day or maintenance work.
• Participate in handling quality issues, such as deviation, CC, CAPA
• Support risk assessment review relating to plant equipment maintenance or ad-hoc work. Apply engineering knowledge to support EHS-related safety investigations, plans, or initiatives.
• Draft SOPs, URS, or other documents as required.
• Perform other tasks assigned by leadership team.

Preferred Qualifications

• NITEC or equivalent technical school or Diploma certification in Mechanical, Electrical, Automation, or Pharmaceutical Engineering,
• Candidates with equivalent work experience in the pharmaceutical industry, GMP environment is required.
• Ability to learn quickly, applying engineering knowledge and relevant skills to translate/simplify them into actionable steps.
• Familiar with refrigeration systems, familiar with the principles of HVAC control
• Display a good working attitude, strong work ethic, and willingness to follow leadership directives.
• Open to accepting temporary work assignments, including overtime on weekends or weekdays, and other roles as required.
• Excellent spoken and written communication skills in English.
• Able to work independently with limited supervision in a fast-paced environment.

Key Responsibilities:

• Design, review and coordinate mechanical systems for building and infrastructure projects, including ACMV, plumbing, sanitary and fire protection systems.
• Coordinate with structural engineers, architects, consultants and contractors to ensure smooth project execution.
• Prepare and review engineering calculations, drawings, specifications and technical submissions.
• Ensure designs comply with Singapore codes, regulations and project requirements.
• Attend project meetings and provide technical support throughout design and construction stages.
• Liaise with clients, consultants and authorities on technical matters.
• Monitor project progress, resolve engineering issues and ensure timely project delivery.
• Conduct site inspections and supervise installation works where required.

Requirements

• Bachelor's Degree in Mechanical Engineering or related engineering discipline.
• Minimum 5 years of relevant experience in building construction or structural engineering projects.
• Familiar with Singapore codes and standards related to mechanical systems.
• Proficient in AutoCAD and Microsoft Office applications.
• Experience in coordinating with consultants, contractors and project teams.
• Strong analytical, problem-solving and communication skills.
• Able to work independently and manage multiple projects simultaneously.

Key Responsibilities:

• Design, review and coordinate mechanical systems for building and infrastructure projects, including ACMV, plumbing, sanitary and fire protection systems.
• Coordinate with structural engineers, architects, consultants and contractors to ensure smooth project execution.
• Prepare and review engineering calculations, drawings, specifications and technical submissions.
• Ensure designs comply with Singapore codes, regulations and project requirements.
• Attend project meetings and provide technical support throughout design and construction stages.
• Liaise with clients, consultants and authorities on technical matters.
• Monitor project progress, resolve engineering issues and ensure timely project delivery.
• Conduct site inspections and supervise installation works where required.

Requirements

• Bachelor's Degree in Mechanical Engineering or related engineering discipline.
• Minimum 5 years of relevant experience in building construction or structural engineering projects.
• Familiar with Singapore codes and standards related to mechanical systems.
• Proficient in AutoCAD and Microsoft Office applications.
• Experience in coordinating with consultants, contractors and project teams.
• Strong analytical, problem-solving and communication skills.
• Able to work independently and manage multiple projects simultaneously.

Managing the costs and contracts of construction projects.

· Cost Estimation and Budgeting

· They ensure that the procurement process is fair, transparent, and in compliance with legal and industry regulations.https://quantitysurveyinghub.com/value-engineering-in-quantity-surveying-a-beginners-guide/

· PQSs also allocate contingency funds to manage unforeseen events and maintain project viability.

· They are proficient in cost estimation techniques, contract law, and financial management.

Company Overview

Established in 2006, Stonrich Pte Ltd leads quality natural stone projects in the region, known for excellence, experience, and reliability. We seek committed, dynamic individuals to join our growing team.

Job Summary

We are seeking a dynamic and detail-oriented Finance cum Human Resource Officer to join our team. This dual-role position is ideal for candidates who are passionate about both financial management and HR functions.

Responsibilities

• Manage day-to-day financial operations by performing bookkeeping, invoicing, and payroll processing to ensure accurate and timely transactions
• Prepare and analyze financial reports, budgets, and forecasts to support strategic decision-making
• Oversee HR processes including recruitment, onboarding, and maintaining employee records to ensure smooth workforce management
• Ensure compliance with relevant financial and HR regulations to mitigate risks and uphold company standards
• Coordinate employee benefits and administer payroll to maintain employee satisfaction and accurate compensation
• Support management by executing ad-hoc finance and HR tasks that contribute to operational efficiency

Preferred competencies and qualifications

• Degree in Finance, Accounting, Human Resources, or related field
• Proven experience in both finance and HR roles is an advantage
• Proficiency in MS Office and accounting/HR software
• Strong analytical, organizational, and communication skills
• High level of integrity and attention to detail

Basic information:

• Monday - Friday 9am to 6pm, Saturday 9am to 1pm
• Basic UP $2500
• AWS and allowances provided
• East region

Job Scope:

• Coordinate the receipt and dispatch of cargo to ensure efficient warehouse operations.
• Assist in managing warehouse traffic flow to enhance operational efficiency and workplace safety.
• Perform accurate picking and packing of cargo according to shipment requirements.
• Maintain warehouse cleanliness and organisation to ensure a safe and productive work environment.
• Monitor and respond to emails in a timely manner to support daily operations and communication.
• Provide support as a relief truck driver when required to meet transportation and delivery needs.

Additional Information:

• Candidates who possess forklift license and class 4 license will be at an advantages.

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified
We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Tan Wen Hui (Serene) | EA Personnel No: R25145352

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.

Familiarity with the following is a plus:

• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Job Description

We are looking for (Senior/Staff) Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.

Familiarity with the following is a plus:

• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Job Description

• Operate the machine and carry out the required tasks at the workstations according to the established operating procedures and safety risk assessment
• Coordinates and execute hands-on physical production task to meet daily output targets. E.g. Safely operate reach trucks and forklifts to transport raw materials, staging components, mixing blending and packaging of finished goods
• Ensure all necessary paperwork (eg: quality related checklist) for the station are completed
• Ensure the product quality is within the specification at all times
• Support production, process, maintenance, QA and project engineering activities as needed
• Support plant activities as required by Management
• Monitor the production supply required in the station and alert when necessary
• Lead problem-solving within the station
• Conduct on-the-job training for new technicians and complete all required certification forms as and when required by the company
• Lead & Deploy resources within the station and during plant shut down period
• Develop and update SOP, SRA and other training materials when needed
• Identify opportunities and work with other teams to drive continuous improvement on EHSS, cost saving, quality and/or yield
• Actively participate in EHSS activities including Concern reporting, Safety Risk Assessment (SRA) Review and EHSS committee meeting participation
• Conform to local regulations and SHEM
• Ensure housekeeping of the work area

Requirements

• Min. GCE “N”, GCE “O”, NITEC, Higher NITEC or equivalent
• Preferably minimum 1 to 2 years of hands-on experience in Manufacturing environment Compounding operation. Fresh graduate is welcome apply
• Able to control DCS consoles
• Good communication skills (both oral and written) and interpersonal skills
• Demonstrate good trouble shooting and analytical skills Independently
• Strong adherence to EHSS requirements
• Good knowledge in MS Software (Excel)
• Preferably with Forklift Driver License
• Able to perform rotating shift work

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking for a Ingot & Wafer (IW) cum Contract Manufacturing Engineer with good ethics and strong passion to take on proactive roles of qualifying and managing external suppliers to achieve company's strategic directions and key yearly goals for ingot and wafer factory. This position requires good analytical and interpersonal skills to work with external suppliers to achieve continuous improvements in IW cost, yield and cell efficiency by implementing best known methods. Selected candidates will work closely with the Process/Integration/QA and Planning team to define all the necessary process and Quality Control procedures to meet product functional and reliability requirements. Frequent travelling to India HQ and ability/willingness to travel at short notices will be a pre-requisite in view of the job nature and requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external suppliers to resolve wafer/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or external suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects.
• Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• Assessment on external suppliers for IW and external wafer as potential cost driver as alternative/new material as well as supply risk mitigation.

Continuous Improvement

• Initiate and lead projects relating to IW cost reduction, IW production yield, cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers' site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

ESSENTIAL JOB COMPETENCIES:

Technical

• Strong technical knowledge in solar ingot growth, wafer manufacturing, and wafer-related process development.
• Familiarity with new material evaluation, qualification, and R&D activities for photovoltaic applications.
• Good understanding of process parameters, material behavior, product performance, and manufacturing requirements across upstream and downstream operations.
• Able to work in a fast-paced environment with good adaptability and professional judgment.
• Proficient in engineering data analysis, statistical interpretation, and technical assessment to support development and process improvement.
• Proficiency in English Language and at least one other language(s) is necessary to liaise with various stakeholders incl. vendors/suppliers.

Analytical & Problem Solving

• Strong analytical capability to identify technical gaps, interpret data trends, and solve process or material related issues effectively.
• Able to perform root cause analysis, evaluate risk, and develop practical corrective and preventive actions.
• Capable of translating complex engineering data into clear conclusions and actionable recommendations.

Soft Skills & Professional Attributes

• Good communication and collaboration skills to work effectively with cross-functional teams, suppliers, and stakeholders.
• Proactive, detail-oriented, and results-driven, with a strong sense of ownership and accountability.
• Able to work in a fast-paced environment with good adaptability and professional judgment.

Leadership

• Able to provide technical guidance and influence decision-making in material development, qualification, and process improvement activities.
• Demonstrates initiative in driving problem resolution, cross-functional alignment, and continuous improvement.
• Capable of supporting team development through knowledge sharing and technical mentoring.

Project Management

• Experience in managing technical projects related to material qualification, process development, plant ramp-up, or cost reduction initiatives.
• Able to coordinate timelines, resources, deliverables, and stakeholder communication to ensure effective project execution.
• Strong ability to prioritize tasks, track progress, and deliver outcomes within schedule and business objectives.

ADDITIONAL RESPONSIBILITIES:

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead troubleshooting and root cause analysis efforts to resolve issues.

Technical / Professional:

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.

Technological:

• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Ingot & Wafer, Solar cell and module processes
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data mining.

General:

• Suitable to work in cleanroom, outdoor testing, and wafer slicing/manufacturing environments.
• Able to adapt to different working conditions and support hands-on technical activities. Able to carry cell/wafer for testing. (
• Familiar with safety, discipline, and operational requirements in both lab and production settings.
• Ability to work under stress in a fast-paced environment with self-motivation.

People/Relations:

• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills - communication and organization.
• Good Team player.

People Management:

• Able to work effectively with cross-functional teams across R&D, engineering, production, and quality.
• Capable of guiding team members, coordinating tasks, and supporting timely issue resolution.
• Demonstrates good communication, teamwork, and accountability.

Project Management:

• Able to manage technical projects related to material evaluation, process development, and cost improvement.
• Capable of coordinating timeline, resources, and deliverables to ensure smooth execution.
• Able to identify risks, track progress, and drive project completion.

Additional Advantageous Skills:

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

As a Design Verification Manager, you are expected to carry out the following responsibilities.

• Be in-charge of a passionate verification team that is constantly pushing the limits
• Developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification.
• Conduct thorough test plan reviews systematically and execute the plan on-time with high quality.
• Achieve zero-defect, with the best and smartest approach to the large verification space.

Requirements

• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Highly disciplined, quality-minded, and highly driven for excellence.
• Excellent team leader and good communication skills.
• Strong expertise in UVM verification methodology.
• Experience in C and/or a scripting language such as python or perl.
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with at least 10 years of relevant experience.
• Experience in RTL design is a plus.
• Experience in video processing and video analytics is a plus.
• Passionate and strong in general programming is a plus.