Total 4 job vacancies by Bathsystem Singapore Pte. Ltd.

Overview

As a Project Coordinator, you would work closely with clients to schedule, plan, monitor, forecast, resource and manage all the project activities aiming at assuring project accuracy and quality from conception to completion. You will be involved in getting shop-drawings approved and proposed rectifications on any defects found. You will ensure that the documentation system is always up to date and in line with ISO guidelines and customers expectation.

Responsibilities

1) Work closely between Singapore and Malaysia Plant to ensure smooth delivery of materials and precast components at sites.

2) Work closely with cross department team to ensure information and issues are clearly defined and resolved.

3) Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

4) Attend site meetings, feedback on sites progress and schedules, justify defects components and arrange for rectification, pre-delivery and post-delivery activities, etc.

5) Interact daily with the clients to interpret their needs and requirements and represent them in the field.

6) Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.

7) Plan, manage and coordinate projects to ensure that the projects are completed on time, within budget and of highest quality.

8) Liaise with the client, consultant, vendors, subcontractors and other relevant parties on field / factory inspection issues pertaining to the quality and project issues.

9) Cooperate and communicate effectively with project manager and other project participants to provide assistances and technical support.

10) Attend required interdepartmental meetings including providing relevant updates on the status of project and QC matters and to obtain and relay information which may impact the project pipeline.

11) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum Degree in Civil / Building / Construction or equivalent.

2) Minimum 1 year of relevant work experience in a Precast or Building & Construction environment with at least 1 year of supervisory capacity.

3) Knowledge of HDB precast construction practices and erection sequence.

4) Knowledge of relevant Statutory requirements and compliances.

5) Familiarity with rules, regulations, best practices and performance standards.

6) Good interpersonal skills to communicate with people of all levels.

7) Willing to work on Sundays or Public Holidays if required.

8) Proficient in Microsoft Office.

9) Someone with a Class 3 Driving License will be advantage.

Overview

As a EHS Coordinator, you will assist the EHS Officer in the daily operation of executing the company's safety regulations and practices in the factory and sites.

Responsibilities

1. Assist EHS Officer on safety and health matters on Production Plan.

2. Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

3. Liaise closely with operations staff, Project Managers, clients, main contractors, consultants and authority etc. on all safety and health issues.

4. Assist EHS Officer in accident / incident reporting and investigations as well as hold toolbox meeting and all EHS matters execution.

5. Coordinate and maintain records of safety orientation and daily toolbox meetings.

6. Ensure safe work practices are adhered to by all parties in the daily site activities.

7. Perform daily inspection to ensure compliance to prevailing MOM regulations and Company ISO & IMS system.

8. Attend to all feed backs on safety irregularities and inform the EHS Officer accordingly.

9. Enforce all safety legislation and in-house safety rules and regulations.

10.Ensure supervisors and workers are following the safe work procedures compliance.

11.Assist EHS Officer to liaise with relevant authority during visiting / complain or feed backs if necessary.

12.Detect safety violation and report to EHS Officer.

13.Perform any other duties as assigned by the Management and the designated manager.

Requirements

1. At least a Professional certificate / N ITE cor equivalent.

2. Must possess at least an Advance Certificate in Workplace Safety and Health by BCA.

3. Must possess professional knowledge in Lawand regulations (WSH Act and Environment).

4. At least 3 years of working experience in construction / manufacturing industry.

5. A good team player with good communication skills and multi-tasking.

6. Physically Fit & Healthy.

7. Hardworking and driven.

8. Able to write and speak in English and Mandarin as need to liaise with Chinese Client and workers.

9. Computer literate with MS Word, Excel, Power Point etc.

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Construction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.